summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2010-07-05net: Fix definition of netif_vdbg() when VERBOSE_DEBUG is definedBen Hutchings1-1/+1
netif_vdbg() was originally defined as entirely equivalent to netdev_vdbg(), but I assume that it was intended to take the same parameters as netif_dbg() etc. (Currently it is only used by the sfc driver, in which I worked on that assumption.) In commit a4ed89c I changed the definition used when VERBOSE_DEBUG is not defined, but I failed to notice that the definition used when VERBOSE_DEBUG is defined was also not as I expected. Change that to match netif_dbg() as well. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-05net/ne: fix memory leak in ne_drv_probe()Kulikov Vasiliy1-1/+3
net_device allocated with alloc_eip_netdev() must be freed. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-04xfrm: fix xfrm by MARK logicPeter Kosyh2-0/+4
While using xfrm by MARK feature in 2.6.34 - 2.6.35 kernels, the mark is always cleared in flowi structure via memset in _decode_session4 (net/ipv4/xfrm4_policy.c), so the policy lookup fails. IPv6 code is affected by this bug too. Signed-off-by: Peter Kosyh <p.kosyh@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-02Merge branch 'vhost-net' of ↵David S. Miller3-48/+58
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
2010-07-02virtio_net: fix oom handling on txRusty Russell1-8/+13
virtio net will never try to overflow the TX ring, so the only reason add_buf may fail is out of memory. Thus, we can not stop the device until some request completes - there's no guarantee anything at all is outstanding. Make the error message clearer as well: error here does not indicate queue full. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (...and avoid TX_BUSY) Cc: stable@kernel.org # .34.x (s/virtqueue_/vi->svq->vq_ops->/) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-02virtio_net: do not reschedule rx refill foreverMichael S. Tsirkin1-4/+3
We currently fill all of RX ring, then add_buf returns ENOSPC, which gets mis-detected as an out of memory condition and causes us to reschedule the work, and so on forever. Fix this by oom = err == -ENOMEM; Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org # .34.x Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-02s2io: resolve statistics issuesJon Mason2-41/+64
This patch resolves a number of issues in the statistics gathering of the s2io driver. On Xframe adapters, the received multicast statistics counter includes pause frames which are not indicated to the driver. This can cause issues where the multicast packet count is higher than what has actually been received, possibly higher than the number of packets received. The driver software counters are replaced with the adapter hardware statistics for rx_packets, rx_bytes, and tx_bytes. It also uses the overflow registers to determine if the statistics wrapped the 32bit register (removing the window of having a statistic value less than the previous call). rx_length_errors statistic now includes undersized packets in addition to oversized packets in its counting. Finally, rx_crc_errors are now being counted. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-02Merge branch 'master' of ↵David S. Miller1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6
2010-07-02linux/net.h: fix kernel-doc warningsRandy Dunlap1-2/+1
Fix kernel-doc warnings in linux/net.h: Warning(include/linux/net.h:151): No description found for parameter 'wq' Warning(include/linux/net.h:151): Excess struct/union/enum/typedef member 'fasync_list' description in 'socket' Warning(include/linux/net.h:151): Excess struct/union/enum/typedef member 'wait' description in 'socket' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-02net: decreasing real_num_tx_queues needs to flush qdiscJohn Fastabend4-5/+30
Reducing real_num_queues needs to flush the qdisc otherwise skbs with queue_mappings greater then real_num_tx_queues can be sent to the underlying driver. The flow for this is, dev_queue_xmit() dev_pick_tx() skb_tx_hash() => hash using real_num_tx_queues skb_set_queue_mapping() ... qdisc_enqueue_root() => enqueue skb on txq from hash ... dev->real_num_tx_queues -= n ... sch_direct_xmit() dev_hard_start_xmit() ndo_start_xmit(skb,dev) => skb queue set with old hash skbs are enqueued on the qdisc with skb->queue_mapping set 0 < queue_mappings < real_num_tx_queues. When the driver decreases real_num_tx_queues skb's may be dequeued from the qdisc with a queue_mapping greater then real_num_tx_queues. This fixes a case in ixgbe where this was occurring with DCB and FCoE. Because the driver is using queue_mapping to map skbs to tx descriptor rings we can potentially map skbs to rings that no longer exist. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-02sched: qdisc_reset_all_tx is calling qdisc_reset without qdisc_lockJohn Fastabend1-2/+10
When calling qdisc_reset() the qdisc lock needs to be held. In this case there is at least one driver i4l which is using this without holding the lock. Add the locking here. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-02qlge: fix a eeh handler to not add a pending timerBreno Leitao1-0/+2
On some ocasions the function qlge_io_resume() tries to add a pending timer, which causes the system to hit the BUG() on add_timer() function. This patch removes the timer during the EEH recovery. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-02qlge: Replacing add_timer() to mod_timer()Breno Leitao1-6/+3
Currently qlge driver calls add_timer() instead of mod_timer(). This patch changes add_timer() to mod_timer(), which seems a better solution. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-02usbnet: Set parent device early for netdev_printk()Ben Hutchings1-2/+3
netdev_printk() follows the net_device's parent device pointer, so we must set that earlier than we previously did. Reported-by: Luís Picciochi Oliveira <pitxyoki@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-02net: Revert "rndis_host: Poll status channel before control channel"Ben Hutchings1-12/+6
This reverts commit c17b274dc2aa538b68c1f02b01a3c4e124b435ba. That change was reported to break rndis_wlan support for the WUSB54GS. Reported-by: Luís Picciochi Oliveira <pitxyoki@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-02netfilter: ip6t_REJECT: fix a dst leak in ipv6 REJECTEric Dumazet1-2/+4
We should release dst if dst->error is set. Bug introduced in 2.6.14 by commit e104411b82f5c ([XFRM]: Always release dst_entry on error in xfrm_lookup) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: stable@kernel.org Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-07-01drivers: bluetooth: bluecard_cs.c: Fixed include error, changed to linux/io.hCody Rester1-1/+1
Fixed include error, changed to linux/io.h Signed-off-by: Cody Rester <codyrester@gmail.com> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-01vhost: add unlikely annotations to error pathMichael S. Tsirkin2-28/+29
patch 'break out of polling loop on error' caused a minor performance regression on my machine: recover that performance by adding a bunch of unlikely annotations in the error handling. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-06-30bonding: check if clients MAC addr has changedFlavio Leitner1-1/+2
When two systems using bonding devices in adaptive load balancing (ALB) communicates with each other, an endless ping-pong of ARP replies starts between these two systems. What happens? In the ALB mode, bonding driver keeps track of each client connected in a hash table, so it can do the receive load balancing (RLB). This hash table is updated when an ARP reply is received, then it scans for the client entry, updates its MAC address and flag it to be announced later. Therefore, two seconds later, the alb monitor runs and send for each updated client entry two ARP replies updating this specific client. The same process happens on the receiving system, causing the endless ping-pong of arp replies. See more information including the relevant functions below: System 1 System 2 bond0 bond0 ping <system2> ARP request ---------> <--------- ARP reply +->rlb_arp_recv <---------------------+ <--- loop begins | rlb_update_entry_from_arp | | client_info->ntt = 1; | | bond_info->rx_ntt = 1; | | | | <communication succeed> | | | | bond_alb_monitor | | rlb_update_rx_clients | | rlb_update_client | | arp_create(ARPOP_REPLY) | | send ARP reply --------------> V | send ARP reply --------------> | rlb_arp_recv | rlb_update_entry_from_arp | client_info->ntt = 1; | bond_info->rx_ntt = 1; | < snipped, same as in system 1> +------- <-------------- send ARP reply <-------------- send ARP reply Besides the unneeded networking traffic, this loop breaks a cluster because a backup system can't take over the IP address. There is always one system sending an ARP reply poisoning the network. This patch fixes the problem adding a check for the MAC address before updating it. Thus, if the MAC address didn't change, there is no need to update neither to announce it later. Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-30Bluetooth: Fix abuse of the preincrement operatorDavid Howells1-1/+1
Fix abuse of the preincrement operator as detected when building with gcc 4.6.0: CC [M] drivers/bluetooth/hci_bcsp.o drivers/bluetooth/hci_bcsp.c: In function 'bcsp_prepare_pkt': drivers/bluetooth/hci_bcsp.c:247:20: warning: operation on 'bcsp->msgq_txseq' may be undefined Reported-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-30mv643xx_eth: use sw csum for big packetsSaeed Bishara2-2/+12
Some controllers (KW, Dove) limits the TX IP/layer4 checksum offloading to a max size. Signed-off-by: Saeed Bishara <saeed@marvell.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-30Merge branch 'master' of ↵David S. Miller4-7/+18
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-06-30xfrm: fix XFRMA_MARK extraction in xfrm_mark_getAndreas Steffen1-1/+1
Determine the size of the xfrm_mark struct, not of its pointer. Signed-off-by: Andreas Steffen <andreas.steffen@strongswan.org> Acked-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29ixgbe: skip non IPv4 packets in ATR filterGuillaume Gaudonville1-1/+3
In driver ixgbe, ixgbe_atr may cause crashes for non-ipv4 packets. Just add a test to check skb->protocol. It may crash on short packets due to ip_hdr() access. Signed-off-by: Guillaume Gaudonville <guillaume.gaudonville@6wind.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29ixgbe: disable tx engine before disabling tx laserJohn Fastabend1-4/+4
Disabling the tx laser while receiving DMA requests can hang the device. After this occurs the device is in a bad state. The GPIO bit never clears when PCI master access is disabled and a reboot is required to get the device in a good state again. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29ixgbe: fix panic when shutting down system with WoL enabledAndy Gospodarek1-1/+2
This patch added to 2.6.34: commit 5f6c01819979afbfec7e0b15fe52371b8eed87e8 Author: Jesse Brandeburg <jesse.brandeburg@intel.com> Date: Wed Apr 14 16:04:23 2010 -0700 ixgbe: fix bug with vlan strip in promsic mode among other things added a function called ixgbe_vlan_filter_enable. This new function wants to access and set some rx_ring parameters, but adapter->rx_ring has already been freed. This simply moves the free until after the access and makes __ixgbe_shutdown look more like ixgbe_remove. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29ethtool: Fix potential user buffer overflow for ETHTOOL_{G, S}RXFHBen Hutchings2-9/+29
struct ethtool_rxnfc was originally defined in 2.6.27 for the ETHTOOL_{G,S}RXFH command with only the cmd, flow_type and data fields. It was then extended in 2.6.30 to support various additional commands. These commands should have been defined to use a new structure, but it is too late to change that now. Since user-space may still be using the old structure definition for the ETHTOOL_{G,S}RXFH commands, and since they do not need the additional fields, only copy the originally defined fields to and from user-space. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29ethtool: Fix potential kernel buffer overflow in ETHTOOL_GRXCLSRLALLBen Hutchings1-2/+3
On a 32-bit machine, info.rule_cnt >= 0x40000000 leads to integer overflow and the buffer may be smaller than needed. Since ETHTOOL_GRXCLSRLALL is unprivileged, this can presumably be used for at least denial of service. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-28bonding: prevent netpoll over bonded interfacesAndy Gospodarek1-11/+22
Support for netpoll over bonded interfaces was added here: commit f6dc31a85cd46a959bdd987adad14c3b645e03c1 Author: WANG Cong <amwang@redhat.com> Date: Thu May 6 00:48:51 2010 -0700 bonding: make bonding support netpoll but it is bad enough that we should probably just disable netpoll over bonding until some of the locking logic in the bonding driver is changed or converted completely to RCU. Simple actions like changing the active slave in active-backup mode will hang the box if a high enough printk debugging level is enabled. Keeping the old code around will be good for anyone that wants to work on it (and for after the RCU conversion), so I propose this small patch rather than ripping it all out. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-27vhost: break out of polling loop on errorMichael S. Tsirkin3-22/+31
When ring parsing fails, we currently handle this as ring empty condition. This means that we enable kicks and recheck ring empty: if this not empty, we re-start polling which of course will fail again. Instead, let's return a negative error code and stop polling. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-06-26phylib: Add autoload support for the LXT973 phy.David Woodhouse1-0/+1
Commit e13647c1 (phylib: Add support for the LXT973 phy.) added a new ID but neglected to also add it to the MODULE_DEVICE_TABLE. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-26ISDN: hysdn, fix potential NULL dereferenceJiri Slaby1-1/+2
Stanse found that lp is dereferenced earlier than checked for being NULL in hysdn_rx_netpkt. Move the initialization below the test. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Patrick McHardy <kaber@trash.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-26vxge: fix memory leak in vxge_alloc_msix() error pathMichal Schmidt1-9/+20
When pci_enable_msix() returned ret<0, entries and vxge_entries were leaked. While at it, use the centralized exit idiom in the function. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25isdn/gigaset: correct CAPI connection state storageTilman Schmidt3-53/+180
CAPI applications can handle several connections in parallel, so one connection state per application isn't sufficient. Store the connection state in the channel structure instead. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25isdn/gigaset: encode HLC and BC togetherTilman Schmidt3-38/+52
Adapt to buggy device firmware which accepts setting HLC only in the same command line as BC, by encoding HLC and BC in a single command if both are specified, and rejecting HLC without BC. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25isdn/gigaset: correct CAPI DATA_B3 Delivery ConfirmationTilman Schmidt1-32/+51
The Gigaset CAPI driver handled all DATA_B3_REQ messages as if the Delivery Confirmation flag bit was set, delaying the emission of the DATA_B3_CONF reply until the data was actually transmitted. Some CAPI applications (notably Asterisk) aren't happy with that behaviour. Change it to actually evaluate the Delivery Confirmation flag as described the CAPI specification. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25isdn/gigaset: correct CAPI voice connection encodingTilman Schmidt1-4/+4
Make the Gigaset CAPI driver select L2_VOICE (AT^SBPR=2) as the layer 2 encoding for transparent connections, like the ISDN4Linux variant. L2_BITSYNC (AT^SBPR=0) mutes internal connections and distorts external ones. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25isdn/gigaset: honor CAPI application's buffer size requestTilman Schmidt6-112/+94
Fix the Gigaset CAPI driver to limit the length of a connection's payload data receive buffers to the corresponding CAPI application's data buffer size, as some real-life CAPI applications tend to be rather unhappy if they receive bigger data blocks than requested. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25cpmac: do not leak struct net_device on phy_connect errorsFlorian Fainelli1-1/+2
If the call to phy_connect fails, we will return directly instead of freeing the previously allocated struct net_device. Signed-off-by: Florian Fainelli <florian@openwrt.org> CC: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25smc91c92_cs: fix the problem that lan & modem does not work simultaneouslyKen Kawasaki1-5/+13
smc91c92_cs: Fix the problem that lan & modem does not work simultaneously in the Megahertz multi-function card. We need to write MEGAHERTZ_ISR to retrigger interrupt. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25ipv6: fix NULL reference in proxy neighbor discoverystephen hemminger1-1/+1
The addition of TLLAO option created a kernel OOPS regression for the case where neighbor advertisement is being sent via proxy path. When using proxy, ipv6_get_ifaddr() returns NULL causing the NULL dereference. Change causing the bug was: commit f7734fdf61ec6bb848e0bafc1fb8bad2c124bb50 Author: Octavian Purdila <opurdila@ixiacom.com> Date: Fri Oct 2 11:39:15 2009 +0000 make TLLAO option for NA packets configurable Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25iwlwifi: set TX_CMD_FLAG_PROT_REQUIRE_MSK in tx_flagWey-Yi Guy1-5/+1
When building tx command, always set TX_CMD_FLAG_PROT_REQUIRE_MSK for 5000 series and up. Without setting this bit the firmware will not examine the RTS/CTS setting and thus not send traffic with the appropriate protection. RTS/CTS is is required for HT traffic in a noisy environment where, without this setting, connections will stall on some hardware as documented in the patch that initially attempted to address this: commit 1152dcc28c66a74b5b3f1a3ede0aa6729bfd48e4 Author: Wey-Yi Guy <wey-yi.w.guy@intel.com> Date: Fri Jan 15 13:42:58 2010 -0800 iwlwifi: Fix throughput stall issue in HT mode for 5000 Similar to 6000 and 1000 series, RTS/CTS is the recommended protection mechanism for 5000 series in HT mode based on the HW design. Using RTS/CTS will better protect the inner exchange from interference, especially in highly-congested environment, it also prevent uCode encounter TX FIFO underrun and other HT mode related performance issues. For 3945 and 4965, different flags are used for RTS/CTS or CTS-to-Self protection. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-06-25iwlwifi: fix multicastJohannes Berg1-1/+6
commit 3474ad635db371b0d8d0ee40086f15d223d5b6a4 Author: Johannes Berg <johannes.berg@intel.com> Date: Thu Apr 29 04:43:05 2010 -0700 iwlwifi: apply filter flags directly broke multicast. The reason, it turns out, is that the code previously checked if ALLMULTI _changed_, which the new code no longer did, and normally it _never_ changes. Had somebody changed it manually, the code prior to my patch there would have been broken already. The reason is that we always, unconditionally, ask the device to pass up all multicast frames, but the new code made it depend on ALLMULTI which broke it since now we'd pass up multicast frames depending on the default filter in the device, which isn't necessarily what we want (since we don't program it right now). Fix this by simply not checking allmulti as we have allmulti behaviour enabled already anyway. Reported-by: Maxim Levitsky <maximlevitsky@gmail.com> Tested-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2010-06-24Bluetooth: Bring back var 'i' incrementGustavo F. Padovan1-0/+2
commit ff6e2163f28a1094fb5ca5950fe2b43c3cf6bc7a accidentally added a regression on the bnep code. Fixing it. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24xfrm: check bundle policy existance before dereferencing itTimo Teräs1-1/+2
Fix the bundle validation code to not assume having a valid policy. When we have multiple transformations for a xfrm policy, the bundle instance will be a chain of bundles with only the first one having the policy reference. When policy_genid is bumped it will expire the first bundle in the chain which is equivalent of expiring the whole chain. Reported-bisected-and-tested-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23sky2: enable rx/tx in sky2_phy_reinit()Brandon Philips1-5/+14
sky2_phy_reinit is called by the ethtool helpers sky2_set_settings, sky2_nway_reset and sky2_set_pauseparam when netif_running. However, at the end of sky2_phy_init GM_GP_CTRL has GM_GPCR_RX_ENA and GM_GPCR_TX_ENA cleared. So, doing these commands causes the device to stop working: $ ethtool -r eth0 $ ethtool -A eth0 autoneg off Fix this issue by enabling Rx/Tx after running sky2_phy_init in sky2_phy_reinit. Signed-off-by: Brandon Philips <bphilips@suse.de> Tested-by: Brandon Philips <bphilips@suse.de> Cc: stable@kernel.org Tested-by: Mike McCormack <mikem@ring3k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23ath9k: Fix bug in starting aniVasanthakumar Thiagarajan2-1/+11
There are few places where ANI is started without checking if it is right to start. This might lead to a case where ani timer would be left undeleted and cause improper memory acccess during module unload. This bug is clearly exposed with paprd support where the driver detects tx hang and does a chip reset. During this reset ani is (re)started without checking if it needs to be started. This would leave a timer scheduled even after all the resources are freed and cause a panic. This patch introduces a bit in sc_flags to indicate if ani needs to be started in sw_scan_start() and ath_reset(). This would fix the following panic. This issue is easily seen with ar9003 + paprd. BUG: unable to handle kernel paging request at 0000000000003f38 [<ffffffff81075391>] ? __queue_work+0x41/0x50 [<ffffffff8106afaa>] run_timer_softirq+0x17a/0x370 [<ffffffff81088be8>] ? tick_dev_program_event+0x48/0x110 [<ffffffff81061f69>] __do_softirq+0xb9/0x1f0 [<ffffffff810ba060>] ? handle_IRQ_event+0x50/0x160 [<ffffffff8100af5c>] call_softirq+0x1c/0x30 [<ffffffff8100c9f5>] do_softirq+0x65/0xa0 [<ffffffff81061e25>] irq_exit+0x85/0x90 [<ffffffff8155e095>] do_IRQ+0x75/0xf0 [<ffffffff815570d3>] ret_from_intr+0x0/0x11 <EOI> [<ffffffff812fd67b>] ? acpi_idle_enter_simple+0xe4/0x119 [<ffffffff812fd674>] ? acpi_idle_enter_simple+0xdd/0x119 [<ffffffff81441c87>] cpuidle_idle_call+0xa7/0x140 [<ffffffff81008da3>] cpu_idle+0xb3/0x110 [<ffffffff81550722>] start_secondary+0x1ee/0x1f5 Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-23cnic: Disable statistics initialization for eth clients that do not support ↵Dmitry Kravkov1-21/+34
statistics Disable statistics initialization for eth clients that do not support statistics. This prevents memory corruption on bnx2x hw. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
2010-06-23net: add dependency on fw class module to qlcnic and netxen_nicAnirban Chakraborty1-0/+2
netxen_nic and qlcnic driver depends on firmware_class module. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23snmp: fix SNMP_ADD_STATS()Eric Dumazet1-1/+1
commit aa2ea0586d9d (tcp: fix outsegs stat for TSO segments) incorrectly assumed SNMP_ADD_STATS() was used from BH context. Fix this using mib[!in_softirq()] instead of mib[0] Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 01:39:57 +0000