summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2013-04-29backlight: lp855x: remove duplicate platform dataKim, Milo3-9/+1
The 'load_new_rom_data' was used for checking whether new ROM data should be updated or not. However, we can decide it with 'size_program' data. If the size is greater than 0, it means updating ROM area is required. Otherwise, the default ROM data will be used. Therefore, this duplicate platform data can be removed. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29backlight: lp855x: fix initial brightness typeKim, Milo1-1/+1
Valid range of the brightness is from 0 to 255, so initial brightness is changed from integer to u8. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29backlight: lp855x: move backlight mode platform dataKim, Milo3-16/+15
The brightness of LP855x devices is controlled by I2C register or PWM input . This mode was selected through the platform data, but it can be chosen by the driver internally without platform data configuration. How to decide the control mode: If the PWM period has specific value, the mode is PWM input. On the other hand, the mode is register-based. This mode selection is done on the _probe(). Move 'mode' from a header file to the driver private data structure, 'lp855 x'. And correlated code was replaced. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29backlight: lp855x: convert a type of device nameKim, Milo2-2/+2
Configurable data, backlight device name is set to constant character type. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29backlight: vgg2432a4: convert vgg2432a4_driver to dev_pm_opsJingoo Han3-26/+18
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Also, use of pm_message_t is deprecated. Thus, it is removed. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29backlight: tosa: convert tosa to dev_pm_opsJingoo Han2-20/+16
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29backlight: omap1: convert omapbl to dev_pm_opsJingoo Han1-12/+10
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29drivers/video/backlight/platform_lcd.c: introduce probe callbackAndrew Bresticker2-0/+7
Platform LCD devices may need to do some device-specific initialization before they can be used (regulator or GPIO setup, for example), but currently the driver does not support any way of doing this. This patch adds a probe() callback to plat_lcd_data which platform LCD devices can set to indicate that device-specific initialization is needed. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29backlight: ili922x: use spi_set_drvdata()Jingoo Han1-1/+1
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29backlight: ili9320: use spi_set_drvdata()Jingoo Han1-1/+1
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29drivers/video/backlight/as3711_bl.c: add OF supportGuennadi Liakhovetski1-1/+117
Add support for configuring AS3711 backlight driver from DT. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Simon Horman <horms@verge.net.au> Cc: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29drivers/video/backlight/adp8870_bl.c: fix error return code in ↵Wei Yongjun1-0/+2
adp8870_led_probe() Fix to return a negative error code from the error handling case instead of zero, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29drivers/video/backlight/adp8860_bl.c: fix error return code in ↵Wei Yongjun1-0/+2
adp8860_led_probe() Fix to return a negative error code from the error handling case instead of zero, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29drivers/video/backlight/lp855x_bl.c: use PAGE_SIZE for the sysfs read operationKim, Milo1-3/+2
sysfs allocates PAGE_SIZE. It is used by each R/W operation method. Use it instead of another buffer size. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29backlight: da903x_bl: use BL_CORE_SUSPENDRESUME optionJingoo Han1-25/+5
Use BL_CORE_SUSPENDRESUME option to support suspend/resume. It reduces code size. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29video: backlight: add ili922x lcd driverStefano Babic3-0/+563
Add LCD driver for Ilitek ILI9221/ILI9222 controller. The driver uses SPI interface for controller access and configuration and RGB interface for graphics data transfer. Signed-off-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29drivers/video/backlight/adp5520_bl.c: fix compiler warning in adp5520_show()Devendra Naga1-2/+5
While compiling with make W=1 (gcc gcc (GCC) 4.7.2 20121109 (Red Hat 4.7.2-8)) the following warning happens: drivers/video/backlight/adp5520_bl.c: In function `adp5520_show': drivers/video/backlight/adp5520_bl.c:146:6: warning: variable `error' set but not used [-Wunused-but-set-variable] fixed by checking the return value of the variable Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29drivers/video/backlight/Kconfig: fix typo "MACH_SAM9...EK" three timesPaul Bolle1-1/+1
Fix three typos (originally) introduced by commit a9a84c37d1ee ("atmel_lcdfb: backlight control"). Two of these typos were introduced in v2.6.25. (The third was introduced in 915190f7d4f0 ("[ARM] 5614/1: at91: atmel_lcdfb: add at91sam9g10 support to atmel LCD driver")). Checking these commits reveals that the default value of 'y' has never been set automatically in all releases since v2.6.25! Perhaps this line might as well be dropped. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Acked-by: Jingoo Han <jg1.han@samsung.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29backlight: tdo24m: convert tdo24m to dev_pm_opsJingoo Han1-10/+8
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29backlight: ltv350qv: convert ltv350qv to dev_pm_opsJingoo Han1-10/+8
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29backlight: locomolcd: convert locomolcd to dev_pm_opsJingoo Han1-9/+7
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29backlight: lm3533_bl: convert lm3533_bl to dev_pm_opsJingoo Han1-12/+10
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29backlight: kb3886_bl: convert kb3886bl to dev_pm_opsJingoo Han1-10/+8
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29backlight: hp680_bl: convert hp680bl to dev_pm_opsJingoo Han1-10/+8
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29backlight: ep93xx: convert ep93xx to dev_pm_opsJingoo Han1-10/+8
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29backlight: corgi_lcd: convert corgi_lcd to dev_pm_opsJingoo Han1-10/+8
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29backlight: adp8870: convert adp8870 to dev_pm_opsJingoo Han1-9/+12
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29backlight: adp8860: convert adp8860 to dev_pm_opsJingoo Han1-9/+12
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29backlight: adp5520: convert adp5520_bl to dev_pm_opsJingoo Han1-11/+10
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29backlight: s6e63m0: convert s6e63m0 to dev_pm_opsJingoo Han1-11/+9
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29backlight: lms501kf03: convert lms501kf03 to dev_pm_opsJingoo Han1-12/+10
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29backlight: ld9040: convert ld9040 to dev_pm_opsJingoo Han1-11/+9
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29drivers/video/backlight/l4f00242t03.c: check return value of regulator_enable()Jingoo Han1-4/+23
regulator_enable() is marked as as __must_check. Therefore the return value of regulator_enable() should be checked. Also, this patch checks return value of regulator_set_voltage(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29drivers/video/backlight/adp8870_bl.c: add missing bracesJingoo Han1-5/+5
Add missing braces to include error message. The error message is related to the return value for sysfs_create_group(). However, sysfs_create_group() is called when pdata->en_ambl_sens is not zero. Thus, the checking return value should be included in the if statement. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29drivers/video/backlight/generic_bl.c: use dev_info() instead of pr_info()Jingoo Han1-4/+2
dev_info() is preferred to pr_info(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29drivers/video/backlight/omap1_bl.c: use dev_info() instead of pr_info()Jingoo Han1-3/+1
dev_info() is preferred to pr_info(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29drivers/video/backlight/jornada720_*.c: use dev_err()/dev_info() instead of ↵Jingoo Han2-20/+19
pr_err()/pr_info() dev_err()/dev_info() are preferred to pr_err()/pr_info(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29drivers/video/backlight/lp855x_bl.c: fix compiler warning in lp855x_probeDevendra Naga1-2/+0
While doing with make W=1 gcc (gcc (GCC) 4.7.2 20121109 (Red Hat 4.7.2-8)) I found drivers/video/backlight/lp855x_bl.c: In function `lp855x_probe': drivers/video/backlight/lp855x_bl.c:342:35: warning: variable `mode' set but not used [-Wunused-but-set-variable] fixed by removing it as since its not used anywhere Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Acked-by: Milo Kim <milo.kim@ti.com> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29drivers/video/backlight/atmel-pwm-bl.c: add __init annotationJingoo Han1-1/+1
When platform_driver_probe() is used, bind/unbind via sysfs is disabled. Thus, __init/__exit annotations can be added to probe()/remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29drivers/video/backlight/atmel-pwm-bl.c: use module_platform_driver_probe()Jingoo Han1-11/+1
Use the module_platform_driver_probe() macro which makes the code smaller and simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29drivers/video/backlight/ep93xx_bl.c: remove incorrect __init annotationJingoo Han1-1/+1
When platform_driver_probe() is not used, bind/unbind via sysfs is enabled. Thus, __init/__exit annotations should be removed from probe()/remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29drivers/video/backlight/platform_lcd.c: remove unnecessary ifdefsJingoo Han1-4/+2
When the macro such as SIMPLE_DEV_PM_OPS is used, there is no need to use '#ifdef CONFIG_PM' to prevent build error. Thus, this patch removes unnecessary ifdefs. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29drivers/video/backlight/ams369fg06.c: convert ams369fg06 to dev_pm_opsJingoo Han1-11/+10
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29MAINTAINERS: Petko has movedPetko Manolov1-2/+4
Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29MAINTAINERS: i8k driver is orphanJean Delvare2-3/+5
Massimo Dal Zotto stopped maintaining the i8k driver several years ago, so move his name from MAINTAINERS to CREDITS. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Massimo Dal Zotto <dz@debian.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29get_maintainer: use filename-only regex match for TegraStephen Warren2-7/+9
Create a new N: entry type in MAINTAINERS which performs a regex match against filenames; either those extracted from patch +++ or --- lines, or those specified on the command-line using the -f option. This provides the same benefits as using a K: regex option to match a set of filenames (see commit eb90d0855b75 "get_maintainer: allow keywords to match filenames"), but without the disadvantage that "random" file content, such as comments, will ever match the regex. Hence, revert most of that commit. Switch the Tegra entry from using K: to N: [akpm@linux-foundation.org: fix typo in docs, per Marcin] Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com> Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29printk: fix failure to return error in devkmsg_poll()Nicolas Kaiser1-1/+2
Error value got overwritten instantly. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29include/linux/printk.h: include stdarg.hAndrew Morton1-0/+1
printk.h uses va_list but doesn't include stdarg.h. Hence printk.h is unusable unless its includer has already included kernel.h (which includes stdarg.h). Remove the dependency by including stdarg.h in printk.h Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29early_printk: consolidate random copies of identical codeThomas Gleixner13-109/+63
The early console implementations are the same all over the place. Move the print function to kernel/printk and get rid of the copies. [akpm@linux-foundation.org: arch/mips/kernel/early_printk.c needs kernel.h for va_list] [paul.gortmaker@windriver.com: sh4: make the bios early console support depend on EARLY_PRINTK] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Richard Weinberger <richard@nod.at> Reviewed-by: Ingo Molnar <mingo@kernel.org> Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29printk/tracing: rework console tracingzhangwei(Jovi)2-20/+7
Commit 7ff9554bb578 ("printk: convert byte-buffer to variable-length record buffer") removed start and end parameters from call_console_drivers, but those parameters still exist in include/trace/events/printk.h. Without start and end parameters handling, printk tracing became more simple as: trace_console(text, len); Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 08:58:24 +0000