summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2008-10-21powerpc/oprofile: Fix mutex locking for cell spu-oprofileCarl Love7-36/+279
The issue is the SPU code is not holding the kernel mutex lock while adding samples to the kernel buffer. This patch creates per SPU buffers to hold the data. Data is added to the buffers from in interrupt context. The data is periodically pushed to the kernel buffer via a new Oprofile function oprofile_put_buff(). The oprofile_put_buff() function is called via a work queue enabling the funtion to acquire the mutex lock. The existing user controls for adjusting the per CPU buffer size is used to control the size of the per SPU buffers. Similarly, overflows of the SPU buffers are reported by incrementing the per CPU buffer stats. This eliminates the need to have architecture specific controls for the per SPU buffers which is not acceptable to the OProfile user tool maintainer. The export of the oprofile add_event_entry() is removed as it is no longer needed given this patch. Note, this patch has not addressed the issue of indexing arrays by the spu number. This still needs to be fixed as the spu numbering is not guarenteed to be 0 to max_num_spus-1. Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Maynard Johnson <maynardj@us.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Acked-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-21powerpc: Unsigned speed cannot be negative in udbg_16559.croel kluin1-1/+1
"unsigned int" speed cannot be negative, it's thus pointless to test if it is. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-21powerpc/pseries: Validate PFN in pseries_remove_lmb()Nathan Fontenot1-0/+6
The pfn of the memory to be removed should be validated prior to attempting to remove the memory. In cases where the probe of a memory section fails during hotplug add, the pfn for the lmb may not be valid. Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-21powerpc/boot: Compare _start against ei.loadsize instead ei.memsizeSebastian Siewior2-10/+20
If the vmlinux binary in memory is larger than 4 MiB than it collides with the initial boot code which is linked at 4 MiB in case of cuBoot. If the the uncompressed image size (on disk size) is less than 4 MiB then it would fit. The difference between those two sizes is the bss section. In cuBoot we have the dtb embedded right after the data section so it is very likely that the reset of the bss section (in kernel's start up code) will overwrite the dtb blob. Therefore we reallocate the dtb. Something similar is allready done to the initrd. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-21Merge commit 'gcl/gcl-next'Benjamin Herrenschmidt3-35/+31
2008-10-21Merge commit 'jwb/jwb-next'Benjamin Herrenschmidt16-3/+2862
2008-10-21powerpc/spufs: Explain conditional decrement of aff_sched_countAndre Detsch1-0/+5
This patch adds a comment to clarify why atomic_dec_if_positive is being used to decrement gang's aff_sched_count on SPU context unbind. Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-10-21powerpc/spufs: Improve search of node for contexts with SPU affinityAndre Detsch1-6/+13
This patch improves redability of the code responsible for trying to find a node with enough SPUs not committed to other affinity gangs. An additional check is also added, to avoid taking into account gangs that have no SPU affinity. Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-10-21powerpc/spufs: Use kmalloc rather than kzalloc for switch log bufferJeremy Kerr1-1/+2
No need to zero the entire buffer, just the head and tail indices. Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-10-21powerpc/spufs: Don't spu_acquire_saved unnecessarily in regs readJeremy Kerr1-0/+5
With most file readers (eg cat, dd), reading a context's regs file will result in two reads: the first to read the data, and the second to return EOF. Because each read performs a spu_acquire_saved, we end up descheduling and re-scheduling the context twice. This change does a simple check to see if we'd return EOF before calling spu_acquire_saved(), saving the extra schedule operation. Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-10-21powerpc/spufs: Don't require full buffer in switch_log readJeremy Kerr1-19/+27
Currently, read() on the sputrace log will block until the read buffer is full. This makes it difficult to retrieve the end of the buffer, as the user will need to read with the right-sized buffer. In a similar method as 91553a1b5e0df006a3573a88d98ee7cd48a3818a, this change makes the switch_log return if there has already been data read. Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-10-21powerpc/spufs: Use state_mutex for switch_log locking, and prevent multiple ↵Jeremy Kerr3-56/+81
openers Currently, we use ctx->mapping_lock and ctx->switch_log->lock for the context switch log. The mapping lock only prevents concurrent open()s, so we require the switch_lock->lock for reads. Since writes to the switch log buffer occur on context switches, we're better off synchronising with the state_mutex, which is held during a switch. Since we're serialised througout the buffer reads and writes, we can use the state mutex to protect open and release too, and can now kfree() the log buffer on release. This allows us to perform the switch log notify without taking any extra locks. Because the buffer is only present while the file is open, we can use it to prevent multiple simultaneous openers. Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-10-21powerpc/spufs: sputrace: Don't block until the read buffer is fullJeremy Kerr1-0/+5
Currently, read() on the sputrace buffer will only return data when the user buffer is exhausted. This may mean that we never see the end of the event log, unless we read() with exactly the right-sized buffer. This change makes sputrace_read not block if we have data ready to return. Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-10-21powerpc/spufs: sputrace: Only enable logging on open(), prevent multiple openersJeremy Kerr1-3/+29
Currently, sputrace will start logging to the event buffer before the log buffer has been open()ed. This results in a heap of "lost samples" warnings if the sputrace file hasn't yet been opened. Since the buffer is reset on open() anyway, there's no need to enable logging when no-one has opened the log. Because open clears the log, make it return EBUSY for mutliple open calls. Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-10-20ibm_newemac: Fix new MAL feature handlingJosh Boyer2-2/+23
Support for new features needed by the PPC 405EZ boards introduced some errors in the MAL and EMAC feature handling. This broke 'allmodconfig' builds as CONFIG_PPC_DCR_NATIVE is not set for those. This patch fixes these errors by wrapping the code in the appropriate #ifdefs. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-17powerpc/4xx: Add PowerPC 4xx GPIO driverSteven A. Falco4-0/+234
This patch adds support for the GPIO functions of PPC40x and PPC44x SOCs. Signed-off-by: Steve Falco <sfalco@harris.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-17powerpc/40x: Add support for Netstal HCU4 boardNiklaus Giger5-0/+1167
Adds support for a HCU4 PPC405GPr based board from Netstal Maschinen AG. Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-17powerpc/40x: Add PowerPC 405EZ Acadia defconfigJosh Boyer1-0/+921
Add simple defconfig for the AMCC PowerPC 405EZ Acadia evaluation board Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-17powerpc/40x: Add cuboot wrapper for Acadia boardJosh Boyer2-1/+177
This adds a cuboot wrapper for the AMCC PowerPC 405EZ Acadia board. The clocking code is derived from U-Boot, originally written by Stefan Roese. Signed-off-by: Josh Boyer <jwboyer@linux.ibm.com>
2008-10-17powerpc/40x: Add PowerPC 40x simple platform supportJosh Boyer3-0/+103
This adds a common board file for almost all of the "simple" PowerPC 40x boards that exist today. This is intended to be a single place to add support for boards that do not differ in platform support from most of the evaluation boards that are used as reference platforms. Boards that have specific requirements or custom hardware setup should still have their own board.c file. The first board ported to this is the AMCC PowerPC 405EZ Acadia board. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-17powerpc/40x: Add AMCC PowerPC 405EZ to cputableJosh Boyer1-0/+13
This adds the AMCC PowerPC 405EZ chip to the cputable Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-17powerpc/40x: AMCC PowerPC 405EZ Acadia DTSJosh Boyer1-0/+224
Add the base DTS for the AMCC PowerPC 405EZ Acadia evalution board. In addition to some of the normal PPC 40x peripherals, the Acadia board has: - 64 MiB PSRAM - NOR and NAND flash - Two USB 1.1 host ports - Two CAN 2.0 ports - ADC and DAC connectors - LCD display This adds the basic platform support to build from. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-15Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds31-286/+869
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Kill unused <asm/debug.h> inclusions MIPS: IP32: Add platform device for CMOS RTC; remove dead code RTC: M48T35: new RTC driver MIPS: IP27: Switch over to RTC class driver MIPS: DS1286: New RTC driver MIPS: IP22/28: Switch over to RTC class driver MIPS: PCI: Scan busses when they are registered MIPS: WGT634U: Add reset button support MIPS: BCM47xx: Use the new SSB GPIO API MIPS: BCM47xx: Remove references to BCM947XX MIPS: WGT634U: Add machine detection message MIPS: Align .data.cacheline_aligned based on CONFIG_MIPS_L1_CACHE_SHIFT MIPS: show_cpuinfo prints the type of the calling CPU MIPS: Fix wrong branch target in new spin_lock code. MIPS: Have a heart for a lonely, lost header file ...
2008-10-15tty: make sure that proc_clear_tty stores the cpu flagsArjan van de Ven1-2/+3
proc_clear_tty() gets called with interrupts off (while holding the task list lock) from sys_setid. This means that it needs the _irqsave version of the locking primitives. Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com> Tested-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-15metronomefb: Fix warning when building 64bitAlan Cox1-1/+1
The metronome driver produces warnings when built on x86-64 as it assumes that size_t is an int. Use %Zd instead. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-15powerpc/mpc5200: Refactor FEC mdio read/write routinesWolfram Sang1-33/+22
Read & write functions now call a generic transfer function, so identical code in both routines could be eliminated. The result is easier to maintain and smaller in source and binary code. Also, fix some checkpatch warnings. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-10-15powerpc/mpc5200: Don't touch pipelining for MPC5200BWolfram Sang1-2/+5
MPC5200 needs to have pipelining disabled for ATA to work. MPC5200B does not. So, for the latter, don't touch the original setting from the bootloader. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-10-15powerpc/52xx: Make cuImage more robust in locating immr node.Grant Likely1-0/+4
Current device trees do not have the device_type = soc property set anymore. Fix up the cuImage bootwrapper fragment to still find the IMMR nodes. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-10-15xfs: fix remount rw with unrecognized optionsChristoph Hellwig1-1/+1
When we skip unrecognized options in xfs_fs_remount we should just break out of the switch and not return because otherwise we may skip clearing the xfs-internal read-only flag. This will only show up on some operations like touch because most read-only checks are done by the VFS which thinks this filesystem is r/w. Eventually we should replace the XFS read-only flag with a helper that always checks the VFS flag to make sure they can never get out of sync. Bug reported and fix verified by Marcel Beister on #xfs. Bug fix verified by updated xfstests/189. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Timothy Shimmin <tes@sgi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-15Merge branch 'build_fix' of ↵Linus Torvalds1-8/+6
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2 * 'build_fix' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: ocfs2: fix build error
2008-10-15Merge branch 'next' of ↵Linus Torvalds325-6682/+13655
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (158 commits) powerpc: Fix CHRP PCI config access for indirect_pci powerpc/chrp: Fix detection of Python PCI host bridge on IBM CHRPs powerpc: Fix 32-bit SMP boot on CHRP powerpc: Fix link errors on 32-bit machines using legacy DMA powerpc/pci: Improve detection of unassigned bridge resources hvc_console: Fix free_irq in spinlocked section powerpc: Get USE_STRICT_MM_TYPECHECKS working again powerpc: Reflect the used arguments in machine_init() prototype powerpc: Fix DMA offset for non-coherent DMA powerpc: fix fsl_upm nand driver modular build powerpc/83xx: add NAND support for the MPC8360E-RDK boards powerpc: FPGA support for GE Fanuc SBC610 i2c: MPC8349E-mITX Power Management and GPIO expander driver powerpc: reserve two DMA channels for audio in MPC8610 HPCD device tree powerpc: document the "fsl,ssi-dma-channel" compatible property powerpc: disable CHRP and PMAC support in various defconfigs OF: add fsl,mcu-mpc8349emitx to the exception list powerpc/83xx: add DS1374 RTC support for the MPC837xE-MDS boards powerpc: remove support for bootmem-allocated memory for the DIU driver powerpc: remove non-dependent load fsl_booke PTE_64BIT ...
2008-10-15MIPS: Kill unused <asm/debug.h> inclusionsShinya Kuribayashi7-8/+0
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: IP32: Add platform device for CMOS RTC; remove dead codeThomas Bogendoerfer2-5/+16
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15RTC: M48T35: new RTC driverThomas Bogendoerfer3-0/+244
This driver replaces the broken ip27-rtc driver in drivers/char and gives back RTC support for SGI IP27 machines. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: IP27: Switch over to RTC class driverThomas Bogendoerfer1-77/+22
This patchset removes some dead code and creates a platform device for the RTC class driver. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: DS1286: New RTC driverThomas Bogendoerfer3-0/+415
This driver replaces the broken DS1286 driver in drivers/char and gives back RTC support for SGI IP22 and IP28 machines. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: IP22/28: Switch over to RTC class driverThomas Bogendoerfer6-89/+15
This patchset removes some dead code and creates a platform device for the RTC class driver. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: PCI: Scan busses when they are registeredAurelien Jarno1-27/+53
The patch below changes register_pci_controller() such that controllers being added after pcibios_init() has run are be scanned immediately. This is needed for example by the BCM47xx PCI controller, which is located on the SSB bus, which is now initialized after the PCI subsystem. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: WGT634U: Add reset button supportAurelien Jarno1-0/+37
This patch adds support for the reset button of WGT634U machine, using GPIO interrupts. Based on a patch from Michel Lespinasse. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: BCM47xx: Use the new SSB GPIO APIAurelien Jarno4-74/+58
This patch simplifies the BCM47xx GPIO code by using the new SSB GPIO API, which does a lot things that were implemented directly in the BCM47xx code. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: BCM47xx: Remove references to BCM947XXAurelien Jarno1-3/+3
This patch removes the remaining reference to the BCM947xx development board codename. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: WGT634U: Add machine detection messageAurelien Jarno1-0/+3
This adds a printk message when a WGT634U machine is detected. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: Align .data.cacheline_aligned based on CONFIG_MIPS_L1_CACHE_SHIFTDavid Daney1-1/+1
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: show_cpuinfo prints the type of the calling CPUJohannes Dickgreber1-1/+1
It should print the type of the Nth processor. Signed-off-by: Johannes Dickgreber <tanzy@gmx.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: Fix wrong branch target in new spin_lock code.Johannes Dickgreber1-1/+1
Signed-off-by: Johannes Dickgreber <tanzy@gmx.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15MIPS: Have a heart for a lonely, lost header file ...Ralf Baechle1-0/+0
... and move it to where all its brothers and sisters reside. Requested by Shane McDonald <mcdonald.shane@gmail.com>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-14ocfs2: fix build errorMark Fasheh1-8/+6
I merged the latest ocfs2_read_blocks() changes in xattr.c wrong. This makes Ocfs2 compile again. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-15Merge commit 'origin'Benjamin Herrenschmidt5097-136896/+277160
Manual fixup of conflicts on: arch/powerpc/include/asm/dcr-regs.h drivers/net/ibm_newemac/core.h
2008-10-14Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds16-326/+918
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c-viapro: Add support for SMBus Process Call transactions i2c: Restore i2c_smbus_process_call function i2c: Do earlier driver model init i2c: Only build Tyan SMBus mux drivers on x86 i2c: Guard against oopses from bad init sequences i2c: Document the implementation details of the /dev interface i2c: Improve dev-interface documentation i2c-parport-light: Don't register a platform device resource hwmon: (dme1737) Convert to a new-style i2c driver hwmon: (dme1737) Be less i2c-centric i2c/tps65010: Vibrator hookup to gpiolib i2c-viapro: Add VX800/VX820 support i2c: Renesas Highlander FPGA SMBus support i2c-pca-isa: Don't grab arbitrary resources i2c/isp1301_omap: Convert to a new-style i2c driver, part 2 i2c/isp1301_omap: Convert to a new-style i2c driver, part 1
2008-10-14Merge branch 'for-linus' of ↵Linus Torvalds48-2949/+5503
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (55 commits) HID: build drivers for all quirky devices by default HID: add missing blacklist entry for Apple ATV ircontrol HID: add support for Bright ABNT2 brazilian device HID: Don't let Avermedia Radio FM800 be handled by usb hid drivers HID: fix numlock led on Dell device 0x413c/0x2105 HID: remove warn() macro from usb hid drivers HID: remove info() macro from usb HID drivers HID: add appletv IR receiver quirk HID: fix a lockup regression when using force feedback on a PID device HID: hiddev.h: Fix example code. HID: hiddev.h: Fix mixed space and tabs in example code. HID: convert to dev_* prints HID: remove hid-ff HID: move zeroplus FF processing HID: move thrustmaster FF processing HID: move pantherlord FF processing HID: fix incorrent length condition in hidraw_write() HID: fix tty<->hid deadlock HID: ignore iBuddy devices HID: report descriptor fix for remaining MacBook JIS keyboards ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-10 18:41:43 +0000