summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2013-10-18OMAPDSS: Fix de_level in videomode_to_omap_video_timings()Roel Kluin1-1/+1
In videomode_to_omap_video_timings, de_level is always set to HIGH regardless of what the vm->flags says. Fix this to set it to high or low according to vm->flags. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> [tomi.valkeinen@ti.com: rewrote the desc] Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-11video: xilinxfb: Simplify error pathMichal Simek1-18/+6
devm_iounmap is called automatically that's why remove it from the code dev_set_drvdata(dev, NULL) is called by generic code after device_release or on probe failure. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-11video: xilinxfb: Use devm_kzalloc instead of kzallocMichal Simek1-9/+2
Simplify driver probe and release function. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-11video: xilinxfb: Use standard variable name conventionMichal Simek1-9/+9
s/op/pdev/ in xilinxfb_of_probe(). No functional chagnes. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09hyperv-fb: add blanking supportGerd Hoffmann1-0/+5
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09hyperv-fb: add pci stubGerd Hoffmann1-1/+39
This patch adds a pci stub driver to hyper-fb. The hyperv framebuffer driver will bind to the pci device then, so linux kernel and userspace know there is a proper kernel driver for the device active. lspci shows this for example: [root@dhcp231 ~]# lspci -vs8 00:08.0 VGA compatible controller: Microsoft Corporation Hyper-V virtual VGA (prog-if 00 [VGA controller]) Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at f8000000 (32-bit, non-prefetchable) [size=64M] Expansion ROM at <unassigned> [disabled] Kernel driver in use: hyperv_fb Another effect is that the xorg vesa driver will not attach to the device and thus the Xorg server will automatically use the fbdev driver instead. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09OMAPDSS: HDMI: Correctly compare timingsRichard Röjfors1-1/+1
There is currently a copy and paste error where the hdmi vsync timings are not compared correctly, this patch fixes this. Signed-off-by: Richard Röjfors <richard.rojfors@gmail.com> [tomi.valkeinen@ti.com: fixed to apply on top of latest tree] Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09omapdss: HDMI: move common functions to a separate fileArchit Taneja6-435/+447
The OMAP4 HDMI encoder driver(hdmi4.c) contains timings tables, and helper functions which can be used as is by the OMAP5/DRA7x encoder driver. Move these to hdmi_common.c so that it's not replicated in the future. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09omapdss: OMAP4: HDMI: remove unnecessary edid macrosArchit Taneja1-8/+0
The hdmi4 driver has edid macros that aren't used at all. Remove them. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09omapdss: HDMI: Rename hdmi driver files to nicer namesArchit Taneja10-33/+25
Replace the ti_hdmi_4xxx* notation for OMAP4 HDMI driver with hdmi4. Rename the hdmi.c encoder driver to hdmi4.c. Rename ti_hdmi.h to hdmi.h Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09omapdss: HDMI: add HDMI wrapper IRQ flagsArchit Taneja2-3/+15
Add flags for the interrupts present in HDMI wrapper block, these will be used to configure HDMI_IRQENABLE_SET/CLEAR and HDMI_IRQSTATUS registers. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09omapdss: HDMI: Clean up the header filesArchit Taneja6-264/+171
Keep only OMAP4 HDMI core block related structs and enums in ti_hdmi_4xxx_ip.h, move the rest to ti_hdmi.h. This holds all library specific data which will be shared between OMAP4 and OMAP5/DRA7x HDMI encoder drivers. Move the duplicate register read/write/wait_for_bit_change functions in the hdmi library files to ti_hdmi.h Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09omapdss: HDMI: remove hdmi_ip_data structArchit Taneja2-58/+47
The struct hdmi_ip_data contains information related to HDMI wrapper, PLL, PHY and core sub-blocks. Now that each of these sub blocks has it's own struct, hdmi_ip_data serves no purpose. The mutex lock in the struct was also never used. Remove this struct to make things cleaner. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09omapdss: HDMI: Use OMAP4 HDMI core functions directly and remove hdmi_ip_opsArchit Taneja6-184/+162
After removing wrapper, pll and phy funcs from ti_hdmi_4xxx_ip.c, we are left with OMAP4 HDMI core functions. Use these directly in hdmi.c rather than using hdmi_ip_ops. Rename the core functions with a 'hdmi4' suffix. We used to have hdmi_ip_ops so that one could support HDMI within a TI SoC which had a non-DSS display subsytem. This however never got put into use, and hence these ops aren't useful any more. The DT/hwmod information for hdmi doesn't split the address space according to the required sub blocks. Keep the address offset and size information in the driver for now. This will be removed when the driver gets the information correctly from DT/hwmod. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09omapdss: HDMI: create a PHY libraryArchit Taneja6-135/+219
HDMI PHY is a block common to DSS in OMAP4, OMAP5 and DRA7x. Move the existing functions from ti_hdmi_4xxx_ip.c to a separate file. These funcs are called directly from the hdmi driver rather than hdmi_ip_ops function pointer calls. Add the PHY library function declarations to ti_hdmi.h. These will be shared amongst the omap4/5 hdmi platform drivers. Remove the PHY function pointer ops from the ti_hdmi_ip_ops struct. The DT/hwmod information for hdmi doesn't split the address space according to the required sub blocks. Keep the address offset and size information in the driver for now. This will be removed when the driver gets the information correctly from DT/hwmod. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09omapdss: HDMI: create a PLL libraryArchit Taneja6-203/+285
HDMI PLL is a block common to DSS in OMAP4, OMAP5 and DRA7x. Move the existing PLL functions from ti_hdmi_4xxx_ip.c and hdmi.c to a separate file. These funcs are called directly from the hdmi driver rather than hdmi_ip_ops function pointer calls. Add the PLL library function declarations to ti_hdmi.h. These will be shared amongst the omap4/5 hdmi platform drivers. Remove the PLL function pointer ops from the ti_hdmi_ip_ops struct. These will be shared amongst the omap4/5 hdmi platform drivers and other libraries. The DT/hwmod information for hdmi doesn't split the address space according to the required sub blocks. Keep the address offset and size information in the driver for now. This will be removed when the driver gets the information correctly from DT/hwmod. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09omapdss: HDMI: create a Wrapper libraryArchit Taneja7-380/+479
HDMI wrapper is a block common to DSS in OMAP4, OMAP5 and DRA7x. Move the existing functions from ti_hdmi_4xxx_ip.c to a separate file. These funcs are called directly from the hdmi driver rather than hdmi_ip_ops funtion pointer calls. Add new wrapper funcs which can be used by other hdmi libraries like core, pll and phy. Move some of the enums, structs and funcs related to the wrapper from ti_hdmi_4xxx_ip.h to ti_hdmi.h. These will be shared amongst the omap4/5 hdmi platform drivers and other libraries. The old hdmi_wp_init() is removed since it didn't do anything. Timing parameters like interlace, hsync_level and vsync_level weren't copied correctly before. Those are copied correctly now. The DT/hwmod information for hdmi doesn't split the address space according to the required sub blocks. Keep the address offset and size information in the driver for now. This will be removed when the driver gets the information correctly from DT/hwmod. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09simplefb: print some info about the registered fbTom Gundersen1-0/+8
This is similar to the output printed by efifb. Signed-off-by: Tom Gundersen <teg@jklm.no> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09video: wmt_ge_rops: Fix a trivial typoSachin Kamat1-1/+1
Add a missing closing brace for email address. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Alexey Charkov <alchark@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09video: wmt_ge_rops: Remove redundant of_match_ptrSachin Kamat1-1/+1
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Alexey Charkov <alchark@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09video: wm8505fb: Remove redundant of_match_ptrSachin Kamat1-1/+1
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Ed Spiridonov <edo.rus@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09video: ssd1307fb: Remove redundant of_match_ptrSachin Kamat1-1/+1
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09video: amba-clcd: Remove unnecessary amba_set_drvdata()Michal Simek1-2/+0
Driver core clears the driver data to NULL after device_release or on probe failure, so just remove it from here. Driver core change: "device-core: Ensure drvdata = NULL when no driver is bound" (sha1: 0998d0631001288a5974afc0b2a5f568bcdecb4d) Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09fbdev: sh_mobile_hdmi: Use devm_kzalloc()Sangjung Woo1-5/+2
Use devm_kzalloc() instead of kzalloc() in order to be free automatically. This makes cleanup paths more simple. Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30Video / au1100fb: Use module_platform_driver() to simplify codeHanjun Guo1-13/+1
Convert to module_platform_driver() to simplify code. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30Video / au1200fb: Use module_platform_driver() to simplify codeHanjun Guo1-15/+1
Convert to module_platform_driver() to simplify code. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30Video / bf54x-lq043fb: Use module_platform_driver() to simplify codeHanjun Guo1-13/+1
Convert to module_platform_driver() to simplify code. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30Video / broadsheetfb: Use module_platform_driver() to simplify codeHanjun Guo1-13/+1
Convert to module_platform_driver() to simplify code. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30Video / cobalt_lcdfb: Use module_platform_driver() to simplify codeHanjun Guo1-13/+1
Convert to module_platform_driver() to simplify code. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30Video / da8xx-fb: Use module_platform_driver() to simplify codeHanjun Guo1-13/+1
Convert to module_platform_driver() to simplify code. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30Video / jz4740_fb: Use module_platform_driver() to simplify codeHanjun Guo1-12/+1
Convert to module_platform_driver() to simplify code. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30Video / metronomefb: Use module_platform_driver() to simplify codeHanjun Guo1-13/+1
Convert to module_platform_driver() to simplify code. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30Video / bfin-t350mcqb-fb: Use module_platform_driver() to simplify codeHanjun Guo1-13/+1
Convert to module_platform_driver() to simplify code. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30Video / hecubafb: Use module_platform_driver() to simplify codeHanjun Guo1-13/+1
Convert to module_platform_driver() to simplify code. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27OMAPDSS: HDMI: OMAP4: Complete dumping of core registersRicardo Neri1-1/+46
Add missing register entries when dumping the core. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27OMAPDSS: HDMI: OMAP4: Complete register definitions for coreRicardo Neri1-1/+47
Add missing register definitions; mainly for colorspace conversion, video timing and interrupt handling. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27OMAPDSS: HDMI: OMAP4: Rename the HDMI_CORE_CTRL1 registerRicardo Neri2-13/+14
Rename the register to be aligned with the HDMI_CORE_SYS naming convention. Also, update the naming of the #defines used for its fields. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27OMAPDSS: HDMI: OMAP4: Complete dumping of DPLL registersRicardo Neri1-0/+2
Add the spread spectrum clock configuration registers to the DPLL dump. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27OMAPDSS: HDMI: OMAP4: Complete register definitions for DPLLRicardo Neri1-0/+2
Add missing register definitions for spread spectrum clocking. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27OMAPDSS: HDMI: OMAP4: Complete dumping of wrapper registersRicardo Neri1-1/+4
Add missing registers when dumping the HDMI wrapper. Also, order the dump by offset to improve readability. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27OMAPDSS: HDMI: OMAP4: Complete register definitions for wrapperRicardo Neri1-1/+3
Add definitions for missing registers in the HDMI wrapper. Also, order the registers by offset to improve readability. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27video: atmel_lcdfb: add device tree suportJean-Christophe PLAGNIOL-VILLARD3-32/+291
get display timings from device tree Use videomode helpers to get display timings and configurations from device tree Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27video: atmel_lcdfb: pass the pdata as paramsJean-Christophe PLAGNIOL-VILLARD6-7/+9
so we can use have list gpio as example (probe via DT) Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27video: atmel_lcdfb: introduce atmel_lcdfb_power_controlJean-Christophe PLAGNIOL-VILLARD1-11/+11
to simplify the check on the presence of the callback Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27video: atmel_lcdfb: fix platform data structJean-Christophe PLAGNIOL-VILLARD21-101/+109
Today we mix pdata and drivers data in the struct atmel_lcdfb_info Fix it and introduce a new struct atmel_lcdfb_pdata for platform data only Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26video: xilinxfb: Remove redundant dev_set_drvdataSachin Kamat1-2/+0
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26video: tcx: Remove redundant dev_set_drvdataSachin Kamat1-2/+0
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26video: sunxvr1000: Remove redundant dev_set_drvdataSachin Kamat1-2/+0
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26video: platinumfb: Remove redundant dev_set_drvdataSachin Kamat1-1/+0
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26video: p9100: Remove redundant dev_set_drvdataSachin Kamat1-2/+0
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-27 14:23:32 +0000