summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-09-05tipc: orphan sock in tipc_release()Cong Wang1-0/+1
Before we unlock the sock in tipc_release(), we have to detach sk->sk_socket from sk, otherwise a parallel tipc_sk_fill_sock_diag() could stil read it after we free this socket. Fixes: c30b70deb5f4 ("tipc: implement socket diagnostics for AF_TIPC") Reported-and-tested-by: syzbot+48804b87c16588ad491d@syzkaller.appspotmail.com Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-05net: qca_spi: Fix race condition in spi transfersStefan Wahren3-98/+93
With performance optimization the spi transfer and messages of basic register operations like qcaspi_read_register moved into the private driver structure. But they weren't protected against mutual access (e.g. between driver kthread and ethtool). So dumping the QCA7000 registers via ethtool during network traffic could make spi_sync hang forever, because the completion in spi_message is overwritten. So revert the optimization completely. Fixes: 291ab06ecf676 ("net: qualcomm: new Ethernet over SPI driver for QCA700") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-05be2net: Fix memory leak in be_cmd_get_profile_config()Petr Oros1-1/+1
DMA allocated memory is lost in be_cmd_get_profile_config() when we call it with non-NULL port_res parameter. Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-05mlxsw: spectrum_buffers: Set up a dedicated pool for BUM trafficPetr Machata1-8/+8
MC-aware mode was recently enabled by mlxsw on Spectrum switches in commit 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports"). Unfortunately, testing has shown that the fix is incomplete and in the presented form actually makes the problem even worse, because any amount of MC traffic causes UC disruption. The reason for this is that currently, mlxsw configures the MC-specific TCs (8..15) to map to pool 0. It also configures a maximum buffer size of 0, but for MC traffic that maximum is disregarded and not part of the quota. Therefore MC traffic is always admitted to the egress buffer. Fix the configuration by directing the MC TCs into pool 15, which is dedicated to MC traffic and recognized as such by the silicon. Fixes: 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds89-452/+941
Pull networking fixes from David Miller: 1) Must perform TXQ teardown before unregistering interfaces in mac80211, from Toke Høiland-Jørgensen. 2) Don't allow creating mac80211_hwsim with less than one channel, from Johannes Berg. 3) Division by zero in cfg80211, fix from Johannes Berg. 4) Fix endian issue in tipc, from Haiqing Bai. 5) BPF sockmap use-after-free fixes from Daniel Borkmann. 6) Spectre-v1 in mac80211_hwsim, from Jinbum Park. 7) Missing rhashtable_walk_exit() in tipc, from Cong Wang. 8) Revert kvzalloc() conversion of AF_PACKET, it breaks mmap() when kvzalloc() tries to use kmalloc() pages. From Eric Dumazet. 9) Fix deadlock in hv_netvsc, from Dexuan Cui. 10) Do not restart timewait timer on RST, from Florian Westphal. 11) Fix double lwstate refcount grab in ipv6, from Alexey Kodanev. 12) Unsolicit report count handling is off-by-one, fix from Hangbin Liu. 13) Sleep-in-atomic in cadence driver, from Jia-Ju Bai. 14) Respect ttl-inherit in ip6 tunnel driver, from Hangbin Liu. 15) Use-after-free in act_ife, fix from Cong Wang. 16) Missing hold to meta module in act_ife, from Vlad Buslov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (91 commits) net: phy: sfp: Handle unimplemented hwmon limits and alarms net: sched: action_ife: take reference to meta module act_ife: fix a potential use-after-free net/mlx5: Fix SQ offset in QPs with small RQ tipc: correct spelling errors for tipc_topsrv_queue_evt() comments tipc: correct spelling errors for struct tipc_bc_base's comment bnxt_en: Do not adjust max_cp_rings by the ones used by RDMA. bnxt_en: Clean up unused functions. bnxt_en: Fix firmware signaled resource change logic in open. sctp: not traverse asoc trans list if non-ipv6 trans exists for ipv6_flowlabel sctp: fix invalid reference to the index variable of the iterator net/ibm/emac: wrong emac_calc_base call was used by typo net: sched: null actions array pointer before releasing action vhost: fix VHOST_GET_BACKEND_FEATURES ioctl request definition r8169: add support for NCube 8168 network card ip6_tunnel: respect ttl inherit for ip6tnl mac80211: shorten the IBSS debug messages mac80211: don't Tx a deauth frame if the AP forbade Tx mac80211: Fix station bandwidth setting after channel switch mac80211: fix a race between restart and CSA flows ...
2018-09-04net: phy: sfp: Handle unimplemented hwmon limits and alarmsAndrew Lunn1-4/+16
Not all SFPs implement the registers containing sensor limits and alarms. Luckily, there is a bit indicating if they are implemented or not. Add checking for this bit, when deciding if the hwmon attributes should be visible. Fixes: 1323061a018a ("net: phy: sfp: Add HWMON support for module sensors") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-04net: sched: action_ife: take reference to meta moduleVlad Buslov1-1/+15
Recent refactoring of add_metainfo() caused use_all_metadata() to add metainfo to ife action metalist without taking reference to module. This causes warning in module_put called from ife action cleanup function. Implement add_metainfo_and_get_ops() function that returns with reference to module taken if metainfo was added successfully, and call it from use_all_metadata(), instead of calling __add_metainfo() directly. Example warning: [ 646.344393] WARNING: CPU: 1 PID: 2278 at kernel/module.c:1139 module_put+0x1cb/0x230 [ 646.352437] Modules linked in: act_meta_skbtcindex act_meta_mark act_meta_skbprio act_ife ife veth nfsv3 nfs fscache xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c tun ebtable_filter ebtables ip6table_filter ip6_tables bridge stp llc mlx5_ib ib_uverbs ib_core intel_rapl sb_edac x86_pkg_temp_thermal mlx5_core coretemp kvm_intel kvm nfsd igb irqbypass crct10dif_pclmul devlink crc32_pclmul mei_me joydev ses crc32c_intel enclosure auth_rpcgss i2c_algo_bit ioatdma ptp mei pps_core ghash_clmulni_intel iTCO_wdt iTCO_vendor_support pcspkr dca ipmi_ssif lpc_ich target_core_mod i2c_i801 ipmi_si ipmi_devintf pcc_cpufreq wmi ipmi_msghandler nfs_acl lockd acpi_pad acpi_power_meter grace sunrpc mpt3sas raid_class scsi_transport_sas [ 646.425631] CPU: 1 PID: 2278 Comm: tc Not tainted 4.19.0-rc1+ #799 [ 646.432187] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 646.440595] RIP: 0010:module_put+0x1cb/0x230 [ 646.445238] Code: f3 66 94 02 e8 26 ff fa ff 85 c0 74 11 0f b6 1d 51 30 94 02 80 fb 01 77 60 83 e3 01 74 13 65 ff 0d 3a 83 db 73 e9 2b ff ff ff <0f> 0b e9 00 ff ff ff e8 59 01 fb ff 85 c0 75 e4 48 c7 c2 20 62 6b [ 646.464997] RSP: 0018:ffff880354d37068 EFLAGS: 00010286 [ 646.470599] RAX: 0000000000000000 RBX: ffffffffc0a52518 RCX: ffffffff8c2668db [ 646.478118] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffffffffc0a52518 [ 646.485641] RBP: ffffffffc0a52180 R08: fffffbfff814a4a4 R09: fffffbfff814a4a3 [ 646.493164] R10: ffffffffc0a5251b R11: fffffbfff814a4a4 R12: 1ffff1006a9a6e0d [ 646.500687] R13: 00000000ffffffff R14: ffff880362bab890 R15: dead000000000100 [ 646.508213] FS: 00007f4164c99800(0000) GS:ffff88036fe40000(0000) knlGS:0000000000000000 [ 646.516961] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 646.523080] CR2: 00007f41638b8420 CR3: 0000000351df0004 CR4: 00000000001606e0 [ 646.530595] Call Trace: [ 646.533408] ? find_symbol_in_section+0x260/0x260 [ 646.538509] tcf_ife_cleanup+0x11b/0x200 [act_ife] [ 646.543695] tcf_action_cleanup+0x29/0xa0 [ 646.548078] __tcf_action_put+0x5a/0xb0 [ 646.552289] ? nla_put+0x65/0xe0 [ 646.555889] __tcf_idr_release+0x48/0x60 [ 646.560187] tcf_generic_walker+0x448/0x6b0 [ 646.564764] ? tcf_action_dump_1+0x450/0x450 [ 646.569411] ? __lock_is_held+0x84/0x110 [ 646.573720] ? tcf_ife_walker+0x10c/0x20f [act_ife] [ 646.578982] tca_action_gd+0x972/0xc40 [ 646.583129] ? tca_get_fill.constprop.17+0x250/0x250 [ 646.588471] ? mark_lock+0xcf/0x980 [ 646.592324] ? check_chain_key+0x140/0x1f0 [ 646.596832] ? debug_show_all_locks+0x240/0x240 [ 646.601839] ? memset+0x1f/0x40 [ 646.605350] ? nla_parse+0xca/0x1a0 [ 646.609217] tc_ctl_action+0x215/0x230 [ 646.613339] ? tcf_action_add+0x220/0x220 [ 646.617748] rtnetlink_rcv_msg+0x56a/0x6d0 [ 646.622227] ? rtnl_fdb_del+0x3f0/0x3f0 [ 646.626466] netlink_rcv_skb+0x18d/0x200 [ 646.630752] ? rtnl_fdb_del+0x3f0/0x3f0 [ 646.634959] ? netlink_ack+0x500/0x500 [ 646.639106] netlink_unicast+0x2d0/0x370 [ 646.643409] ? netlink_attachskb+0x340/0x340 [ 646.648050] ? _copy_from_iter_full+0xe9/0x3e0 [ 646.652870] ? import_iovec+0x11e/0x1c0 [ 646.657083] netlink_sendmsg+0x3b9/0x6a0 [ 646.661388] ? netlink_unicast+0x370/0x370 [ 646.665877] ? netlink_unicast+0x370/0x370 [ 646.670351] sock_sendmsg+0x6b/0x80 [ 646.674212] ___sys_sendmsg+0x4a1/0x520 [ 646.678443] ? copy_msghdr_from_user+0x210/0x210 [ 646.683463] ? lock_downgrade+0x320/0x320 [ 646.687849] ? debug_show_all_locks+0x240/0x240 [ 646.692760] ? do_raw_spin_unlock+0xa2/0x130 [ 646.697418] ? _raw_spin_unlock+0x24/0x30 [ 646.701798] ? __handle_mm_fault+0x1819/0x1c10 [ 646.706619] ? __pmd_alloc+0x320/0x320 [ 646.710738] ? debug_show_all_locks+0x240/0x240 [ 646.715649] ? restore_nameidata+0x7b/0xa0 [ 646.720117] ? check_chain_key+0x140/0x1f0 [ 646.724590] ? check_chain_key+0x140/0x1f0 [ 646.729070] ? __fget_light+0xbc/0xd0 [ 646.733121] ? __sys_sendmsg+0xd7/0x150 [ 646.737329] __sys_sendmsg+0xd7/0x150 [ 646.741359] ? __ia32_sys_shutdown+0x30/0x30 [ 646.746003] ? up_read+0x53/0x90 [ 646.749601] ? __do_page_fault+0x484/0x780 [ 646.754105] ? do_syscall_64+0x1e/0x2c0 [ 646.758320] do_syscall_64+0x72/0x2c0 [ 646.762353] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 646.767776] RIP: 0033:0x7f4163872150 [ 646.771713] Code: 8b 15 3c 7d 2b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb cd 66 0f 1f 44 00 00 83 3d b9 d5 2b 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be cd 00 00 48 89 04 24 [ 646.791474] RSP: 002b:00007ffdef7d6b58 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 646.799721] RAX: ffffffffffffffda RBX: 0000000000000024 RCX: 00007f4163872150 [ 646.807240] RDX: 0000000000000000 RSI: 00007ffdef7d6bd0 RDI: 0000000000000003 [ 646.814760] RBP: 000000005b8b9482 R08: 0000000000000001 R09: 0000000000000000 [ 646.822286] R10: 00000000000005e7 R11: 0000000000000246 R12: 00007ffdef7dad20 [ 646.829807] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000679bc0 [ 646.837360] irq event stamp: 6083 [ 646.841043] hardirqs last enabled at (6081): [<ffffffff8c220a7d>] __call_rcu+0x17d/0x500 [ 646.849882] hardirqs last disabled at (6083): [<ffffffff8c004f06>] trace_hardirqs_off_thunk+0x1a/0x1c [ 646.859775] softirqs last enabled at (5968): [<ffffffff8d4004a1>] __do_softirq+0x4a1/0x6ee [ 646.868784] softirqs last disabled at (6082): [<ffffffffc0a78759>] tcf_ife_cleanup+0x39/0x200 [act_ife] [ 646.878845] ---[ end trace b1b8c12ffe51e657 ]--- Fixes: 5ffe57da29b3 ("act_ife: fix a potential deadlock") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-04act_ife: fix a potential use-after-freeCong Wang1-1/+1
Immediately after module_put(), user could delete this module, so e->ops could be already freed before we call e->ops->release(). Fix this by moving module_put() after ops->release(). Fixes: ef6980b6becb ("introduce IFE action") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-04net/mlx5: Fix SQ offset in QPs with small RQTariq Toukan1-2/+3
Correct the formula for calculating the RQ page remainder, which should be in byte granularity. The result will be non-zero only for RQs smaller than PAGE_SIZE, as an RQ size is a power of 2. Divide this by the SQ stride (MLX5_SEND_WQE_BB) to get the SQ offset in strides granularity. Fixes: d7037ad73daa ("net/mlx5: Fix QP fragmented buffer allocation") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03Merge tag 'mac80211-for-davem-2018-09-03' of ↵David S. Miller15-187/+182
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Here are quite a large number of fixes, notably: * various A-MSDU building fixes (currently only affects mt76) * syzkaller & spectre fixes in hwsim * TXQ vs. teardown fix that was causing crashes * embed WMM info in reg rule, bad code here had been causing crashes * one compilation issue with fix from Arnd (rfkill-gpio includes) * fixes for a race and bad data during/after channel switch * nl80211: a validation fix, attribute type & unit fixes along with other small fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03tipc: correct spelling errors for tipc_topsrv_queue_evt() commentsZhenbo Gao1-2/+2
tipc_conn_queue_evt -> tipc_topsrv_queue_evt tipc_send_work -> tipc_conn_send_work tipc_send_to_sock -> tipc_conn_send_to_sock Signed-off-by: Zhenbo Gao <zhenbo.gao@windriver.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03tipc: correct spelling errors for struct tipc_bc_base's commentZhenbo Gao1-2/+2
Trivial fix for two spelling mistakes. Signed-off-by: Zhenbo Gao <zhenbo.gao@windriver.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03Merge branch 'bnxt_en-Bug-fixes'David S. Miller5-33/+20
Michael Chan says: ==================== bnxt_en: Bug fixes. This short series fixes resource related logic in the driver, mostly affecting the RDMA driver under corner cases. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03bnxt_en: Do not adjust max_cp_rings by the ones used by RDMA.Michael Chan4-12/+9
Currently, the driver adjusts the bp->hw_resc.max_cp_rings by the number of MSIX vectors used by RDMA. There is one code path in open that needs to check the true max_cp_rings including any used by RDMA. This code is now checking for the reduced max_cp_rings which will fail when the number of cp rings is very small. To fix this in a clean way, we don't adjust max_cp_rings anymore. Instead, we add a helper bnxt_get_max_func_cp_rings_for_en() to get the reduced max_cp_rings when appropriate. Fixes: ec86f14ea506 ("bnxt_en: Add ULP calls to stop and restart IRQs.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03bnxt_en: Clean up unused functions.Michael Chan4-18/+1
Remove unused bnxt_subtract_ulp_resources(). Change bnxt_get_max_func_irqs() to static since it is only locally used. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03bnxt_en: Fix firmware signaled resource change logic in open.Michael Chan1-3/+10
When the driver detects that resources have changed during open, it should reset the rx and tx rings to 0. This will properly setup the init sequence to initialize the default rings again. We also need to signal the RDMA driver to stop and clear its interrupts. We then call the RoCE driver to restart if a new set of default rings is successfully reserved. Fixes: 25e1acd6b92b ("bnxt_en: Notify firmware about IF state changes.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03Merge branch 'sctp-two-fixes-for-spp_ipv6_flowlabel-and-spp_dscp-sockopts'David S. Miller1-15/+19
Xin Long says: ==================== sctp: two fixes for spp_ipv6_flowlabel and spp_dscp sockopts This patchset fixes two problems in sctp_apply_peer_addr_params() when setting spp_ipv6_flowlabel or spp_dscp. ==================== Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03sctp: not traverse asoc trans list if non-ipv6 trans exists for ipv6_flowlabelXin Long1-4/+6
When users set params.spp_address and get a trans, ipv6_flowlabel flag should be applied into this trans. But even if this one is not an ipv6 trans, it should not go to apply it into all other transes of the asoc but simply ignore it. Fixes: 0b0dce7a36fb ("sctp: add spp_ipv6_flowlabel and spp_dscp for sctp_paddrparams") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03sctp: fix invalid reference to the index variable of the iteratorXin Long1-11/+13
Now in sctp_apply_peer_addr_params(), if SPP_IPV6_FLOWLABEL flag is set and trans is NULL, it would use trans as the index variable to traverse transport_addr_list, then trans is set as the last transport of it. Later, if SPP_DSCP flag is set, it would enter into the wrong branch as trans is actually an invalid reference. So fix it by using a new index variable to traverse transport_addr_list for both SPP_DSCP and SPP_IPV6_FLOWLABEL flags process. Fixes: 0b0dce7a36fb ("sctp: add spp_ipv6_flowlabel and spp_dscp for sctp_paddrparams") Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net/ibm/emac: wrong emac_calc_base call was used by typoIvan Mikhaylov1-3/+3
__emac_calc_base_mr1 was used instead of __emac4_calc_base_mr1 by copy-paste mistake for emac4syn. Fixes: 45d6e545505fd32edb812f085be7de45b6a5c0af ("net/ibm/emac: add 8192 rx/tx fifo size") Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net: sched: null actions array pointer before releasing actionVlad Buslov1-1/+1
Currently, tcf_action_delete() nulls actions array pointer after putting and deleting it. However, if tcf_idr_delete_index() returns an error, pointer to action is not set to null. That results it being released second time in error handling code of tca_action_gd(). Kasan error: [ 807.367755] ================================================================== [ 807.375844] BUG: KASAN: use-after-free in tc_setup_cb_call+0x14e/0x250 [ 807.382763] Read of size 8 at addr ffff88033e636000 by task tc/2732 [ 807.391289] CPU: 0 PID: 2732 Comm: tc Tainted: G W 4.19.0-rc1+ #799 [ 807.399542] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 807.407948] Call Trace: [ 807.410763] dump_stack+0x92/0xeb [ 807.414456] print_address_description+0x70/0x360 [ 807.419549] kasan_report+0x14d/0x300 [ 807.423582] ? tc_setup_cb_call+0x14e/0x250 [ 807.428150] tc_setup_cb_call+0x14e/0x250 [ 807.432539] ? nla_put+0x65/0xe0 [ 807.436146] fl_dump+0x394/0x3f0 [cls_flower] [ 807.440890] ? fl_tmplt_dump+0x140/0x140 [cls_flower] [ 807.446327] ? lock_downgrade+0x320/0x320 [ 807.450702] ? lock_acquire+0xe2/0x220 [ 807.454819] ? is_bpf_text_address+0x5/0x140 [ 807.459475] ? memcpy+0x34/0x50 [ 807.462980] ? nla_put+0x65/0xe0 [ 807.466582] tcf_fill_node+0x341/0x430 [ 807.470717] ? tcf_block_put+0xe0/0xe0 [ 807.474859] tcf_node_dump+0xdb/0xf0 [ 807.478821] fl_walk+0x8e/0x170 [cls_flower] [ 807.483474] tcf_chain_dump+0x35a/0x4d0 [ 807.487703] ? tfilter_notify+0x170/0x170 [ 807.492091] ? tcf_fill_node+0x430/0x430 [ 807.496411] tc_dump_tfilter+0x362/0x3f0 [ 807.500712] ? tc_del_tfilter+0x850/0x850 [ 807.505104] ? kasan_unpoison_shadow+0x30/0x40 [ 807.509940] ? __mutex_unlock_slowpath+0xcf/0x410 [ 807.515031] netlink_dump+0x263/0x4f0 [ 807.519077] __netlink_dump_start+0x2a0/0x300 [ 807.523817] ? tc_del_tfilter+0x850/0x850 [ 807.528198] rtnetlink_rcv_msg+0x46a/0x6d0 [ 807.532671] ? rtnl_fdb_del+0x3f0/0x3f0 [ 807.536878] ? tc_del_tfilter+0x850/0x850 [ 807.541280] netlink_rcv_skb+0x18d/0x200 [ 807.545570] ? rtnl_fdb_del+0x3f0/0x3f0 [ 807.549773] ? netlink_ack+0x500/0x500 [ 807.553913] netlink_unicast+0x2d0/0x370 [ 807.558212] ? netlink_attachskb+0x340/0x340 [ 807.562855] ? _copy_from_iter_full+0xe9/0x3e0 [ 807.567677] ? import_iovec+0x11e/0x1c0 [ 807.571890] netlink_sendmsg+0x3b9/0x6a0 [ 807.576192] ? netlink_unicast+0x370/0x370 [ 807.580684] ? netlink_unicast+0x370/0x370 [ 807.585154] sock_sendmsg+0x6b/0x80 [ 807.589015] ___sys_sendmsg+0x4a1/0x520 [ 807.593230] ? copy_msghdr_from_user+0x210/0x210 [ 807.598232] ? do_wp_page+0x174/0x880 [ 807.602276] ? __handle_mm_fault+0x749/0x1c10 [ 807.607021] ? __handle_mm_fault+0x1046/0x1c10 [ 807.611849] ? __pmd_alloc+0x320/0x320 [ 807.615973] ? check_chain_key+0x140/0x1f0 [ 807.620450] ? check_chain_key+0x140/0x1f0 [ 807.624929] ? __fget_light+0xbc/0xd0 [ 807.628970] ? __sys_sendmsg+0xd7/0x150 [ 807.633172] __sys_sendmsg+0xd7/0x150 [ 807.637201] ? __ia32_sys_shutdown+0x30/0x30 [ 807.641846] ? up_read+0x53/0x90 [ 807.645442] ? __do_page_fault+0x484/0x780 [ 807.649949] ? do_syscall_64+0x1e/0x2c0 [ 807.654164] do_syscall_64+0x72/0x2c0 [ 807.658198] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 807.663625] RIP: 0033:0x7f42e9870150 [ 807.667568] Code: 8b 15 3c 7d 2b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb cd 66 0f 1f 44 00 00 83 3d b9 d5 2b 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be cd 00 00 48 89 04 24 [ 807.687328] RSP: 002b:00007ffdbf595b58 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 807.695564] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f42e9870150 [ 807.703083] RDX: 0000000000000000 RSI: 00007ffdbf595b80 RDI: 0000000000000003 [ 807.710605] RBP: 00007ffdbf599d90 R08: 0000000000679bc0 R09: 000000000000000f [ 807.718127] R10: 00000000000005e7 R11: 0000000000000246 R12: 00007ffdbf599d88 [ 807.725651] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 807.735048] Allocated by task 2687: [ 807.738902] kasan_kmalloc+0xa0/0xd0 [ 807.742852] __kmalloc+0x118/0x2d0 [ 807.746615] tcf_idr_create+0x44/0x320 [ 807.750738] tcf_nat_init+0x41e/0x530 [act_nat] [ 807.755638] tcf_action_init_1+0x4e0/0x650 [ 807.760104] tcf_action_init+0x1ce/0x2d0 [ 807.764395] tcf_exts_validate+0x1d8/0x200 [ 807.768861] fl_change+0x55a/0x26b4 [cls_flower] [ 807.773845] tc_new_tfilter+0x748/0xa20 [ 807.778051] rtnetlink_rcv_msg+0x56a/0x6d0 [ 807.782517] netlink_rcv_skb+0x18d/0x200 [ 807.786804] netlink_unicast+0x2d0/0x370 [ 807.791095] netlink_sendmsg+0x3b9/0x6a0 [ 807.795387] sock_sendmsg+0x6b/0x80 [ 807.799240] ___sys_sendmsg+0x4a1/0x520 [ 807.803445] __sys_sendmsg+0xd7/0x150 [ 807.807473] do_syscall_64+0x72/0x2c0 [ 807.811506] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 807.818776] Freed by task 2728: [ 807.822283] __kasan_slab_free+0x122/0x180 [ 807.826752] kfree+0xf4/0x2f0 [ 807.830080] __tcf_action_put+0x5a/0xb0 [ 807.834281] tcf_action_put_many+0x46/0x70 [ 807.838747] tca_action_gd+0x232/0xc40 [ 807.842862] tc_ctl_action+0x215/0x230 [ 807.846977] rtnetlink_rcv_msg+0x56a/0x6d0 [ 807.851444] netlink_rcv_skb+0x18d/0x200 [ 807.855731] netlink_unicast+0x2d0/0x370 [ 807.860021] netlink_sendmsg+0x3b9/0x6a0 [ 807.864312] sock_sendmsg+0x6b/0x80 [ 807.868166] ___sys_sendmsg+0x4a1/0x520 [ 807.872372] __sys_sendmsg+0xd7/0x150 [ 807.876401] do_syscall_64+0x72/0x2c0 [ 807.880431] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 807.887704] The buggy address belongs to the object at ffff88033e636000 which belongs to the cache kmalloc-256 of size 256 [ 807.900909] The buggy address is located 0 bytes inside of 256-byte region [ffff88033e636000, ffff88033e636100) [ 807.913155] The buggy address belongs to the page: [ 807.918322] page:ffffea000cf98d80 count:1 mapcount:0 mapping:ffff88036f80ee00 index:0x0 compound_mapcount: 0 [ 807.928831] flags: 0x5fff8000008100(slab|head) [ 807.933647] raw: 005fff8000008100 ffffea000db44f00 0000000400000004 ffff88036f80ee00 [ 807.942050] raw: 0000000000000000 0000000080190019 00000001ffffffff 0000000000000000 [ 807.950456] page dumped because: kasan: bad access detected [ 807.958240] Memory state around the buggy address: [ 807.963405] ffff88033e635f00: fc fc fc fc fb fb fb fb fb fb fb fc fc fc fc fb [ 807.971288] ffff88033e635f80: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc [ 807.979166] >ffff88033e636000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 807.994882] ^ [ 807.998477] ffff88033e636080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 808.006352] ffff88033e636100: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 808.014230] ================================================================== [ 808.022108] Disabling lock debugging due to kernel taint Fixes: edfaf94fa705 ("net_sched: improve and refactor tcf_action_put_many()") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03vhost: fix VHOST_GET_BACKEND_FEATURES ioctl request definitionGleb Fotengauer-Malinovskiy1-1/+1
The _IOC_READ flag fits this ioctl request more because this request actually only writes to, but doesn't read from userspace. See NOTEs in include/uapi/asm-generic/ioctl.h for more information. Fixes: 429711aec282 ("vhost: switch to use new message format") Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03r8169: add support for NCube 8168 network cardAnthony Wong2-0/+3
This card identifies itself as: Ethernet controller [0200]: NCube Device [10ff:8168] (rev 06) Subsystem: TP-LINK Technologies Co., Ltd. Device [7470:3468] Adding a new entry to rtl8169_pci_tbl makes the card work. Link: http://launchpad.net/bugs/1788730 Signed-off-by: Anthony Wong <anthony.wong@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03ip6_tunnel: respect ttl inherit for ip6tnlHangbin Liu1-1/+9
man ip-tunnel ttl section says: 0 is a special value meaning that packets inherit the TTL value. IPv4 tunnel respect this in ip_tunnel_xmit(), but IPv6 tunnel has not implement it yet. To make IPv6 behave consistently with IP tunnel, add ipv6 tunnel inherit support. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03mac80211: shorten the IBSS debug messagesEmmanuel Grumbach1-11/+11
When tracing is enabled, all the debug messages are recorded and must not exceed MAX_MSG_LEN (100) columns. Longer debug messages grant the user with: WARNING: CPU: 3 PID: 32642 at /tmp/wifi-core-20180806094828/src/iwlwifi-stack-dev/net/mac80211/./trace_msg.h:32 trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211] Workqueue: phy1 ieee80211_iface_work [mac80211] RIP: 0010:trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211] Call Trace: __sdata_dbg+0xbd/0x120 [mac80211] ieee80211_ibss_rx_queued_mgmt+0x15f/0x510 [mac80211] ieee80211_iface_work+0x21d/0x320 [mac80211] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-03mac80211: don't Tx a deauth frame if the AP forbade TxEmmanuel Grumbach1-2/+15
If the driver fails to properly prepare for the channel switch, mac80211 will disconnect. If the CSA IE had mode set to 1, it means that the clients are not allowed to send any Tx on the current channel, and that includes the deauthentication frame. Make sure that we don't send the deauthentication frame in this case. In iwlwifi, this caused a failure to flush queues since the firmware already closed the queues after having parsed the CSA IE. Then mac80211 would wait until the deauthentication frame would go out (drv_flush(drop=false)) and that would never happen. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-03mac80211: Fix station bandwidth setting after channel switchIlan Peer1-0/+53
When performing a channel switch flow for a managed interface, the flow did not update the bandwidth of the AP station and the rate scale algorithm. In case of a channel width downgrade, this would result with the rate scale algorithm using a bandwidth that does not match the interface channel configuration. Fix this by updating the AP station bandwidth and rate scaling algorithm before the actual channel change in case of a bandwidth downgrade, or after the actual channel change in case of a bandwidth upgrade. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-03mac80211: fix a race between restart and CSA flowsEmmanuel Grumbach1-1/+20
We hit a problem with iwlwifi that was caused by a bug in mac80211. A bug in iwlwifi caused the firwmare to crash in certain cases in channel switch. Because of that bug, drv_pre_channel_switch would fail and trigger the restart flow. Now we had the hw restart worker which runs on the system's workqueue and the csa_connection_drop_work worker that runs on mac80211's workqueue that can run together. This is obviously problematic since the restart work wants to reconfigure the connection, while the csa_connection_drop_work worker does the exact opposite: it tries to disconnect. Fix this by cancelling the csa_connection_drop_work worker in the restart worker. Note that this can sound racy: we could have: driver iface_work CSA_work restart_work +++++++++++++++++++++++++++++++++++++++++++++ | <--drv_cs ---| <FW CRASH!> -CS FAILED--> | | | cancel_work(CSA) schedule | CSA work | | | Race between those 2 But this is not possible because we flush the workqueue in the restart worker before we cancel the CSA worker. That would be bullet proof if we could guarantee that we schedule the CSA worker only from the iface_work which runs on the workqueue (and not on the system's workqueue), but unfortunately we do have an instance in which we schedule the CSA work outside the context of the workqueue (ieee80211_chswitch_done). Note also that we should probably cancel other workers like beacon_connection_loss_work and possibly others for different types of interfaces, at the very least, IBSS should suffer from the exact same problem, but for now, do the minimum to fix the actual bug that was actually experienced and reproduced. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-03mac80211: fix WMM TXOP calculationDreyfuss, Haim1-2/+1
In commit 9236c4523e5b ("mac80211: limit wmm params to comply with ETSI requirements"), we have limited the WMM parameters to comply with 802.11 and ETSI standard. Mistakenly the TXOP value was caluclated wrong. Fix it by taking the minimum between 802.11 to ETSI to make sure we are not violating both. Fixes: e552af058148 ("mac80211: limit wmm params to comply with ETSI requirements") Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-03cfg80211: fix a type issue in ieee80211_chandef_to_operating_class()Dan Carpenter1-1/+1
The "chandef->center_freq1" variable is a u32 but "freq" is a u16 so we are truncating away the high bits. I noticed this bug because in commit 9cf0a0b4b64a ("cfg80211: Add support for 60GHz band channels 5 and 6") we made "freq <= 56160 + 2160 * 6" a valid requency when before it was only "freq <= 56160 + 2160 * 4" that was valid. It introduces a static checker warning: net/wireless/util.c:1571 ieee80211_chandef_to_operating_class() warn: always true condition '(freq <= 56160 + 2160 * 6) => (0-u16max <= 69120)' But really we probably shouldn't have been truncating the high bits away to begin with. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-03mac80211: fix an off-by-one issue in A-MSDU max_subframe computationLorenzo Bianconi1-1/+1
Initialize 'n' to 2 in order to take into account also the first packet in the estimation of max_subframe limit for a given A-MSDU since frag_tail pointer is NULL when ieee80211_amsdu_aggregate routine analyzes the second frame. Fixes: 6e0456b54545 ("mac80211: add A-MSDU tx support") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-02Merge tag 'dma-mapping-4.19-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds4-2/+13
Pull dma-mapping fixes from Christoph Hellwig: "A few fixes for the fallout of being a little more pedantic about dma masks" * tag 'dma-mapping-4.19-2' of git://git.infradead.org/users/hch/dma-mapping: of/platform: initialise AMBA default DMA masks sparc: set a default 32-bit dma mask for OF devices kernel/dma/direct: take DMA offset into account in dma_direct_supported
2018-09-02uapi: Fix linux/rds.h userspace compilation errors.Vinson Lee1-0/+1
Include linux/in6.h for struct in6_addr. /usr/include/linux/rds.h:156:18: error: field ‘laddr’ has incomplete type struct in6_addr laddr; ^~~~~ /usr/include/linux/rds.h:157:18: error: field ‘faddr’ has incomplete type struct in6_addr faddr; ^~~~~ /usr/include/linux/rds.h:178:18: error: field ‘laddr’ has incomplete type struct in6_addr laddr; ^~~~~ /usr/include/linux/rds.h:179:18: error: field ‘faddr’ has incomplete type struct in6_addr faddr; ^~~~~ /usr/include/linux/rds.h:198:18: error: field ‘bound_addr’ has incomplete type struct in6_addr bound_addr; ^~~~~~~~~~ /usr/include/linux/rds.h:199:18: error: field ‘connected_addr’ has incomplete type struct in6_addr connected_addr; ^~~~~~~~~~~~~~ /usr/include/linux/rds.h:219:18: error: field ‘local_addr’ has incomplete type struct in6_addr local_addr; ^~~~~~~~~~ /usr/include/linux/rds.h:221:18: error: field ‘peer_addr’ has incomplete type struct in6_addr peer_addr; ^~~~~~~~~ /usr/include/linux/rds.h:245:18: error: field ‘src_addr’ has incomplete type struct in6_addr src_addr; ^~~~~~~~ /usr/include/linux/rds.h:246:18: error: field ‘dst_addr’ has incomplete type struct in6_addr dst_addr; ^~~~~~~~ Fixes: b7ff8b1036f0 ("rds: Extend RDS API for IPv6 support") Signed-off-by: Vinson Lee <vlee@freedesktop.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net: cadence: Fix a sleep-in-atomic-context bug in macb_halt_tx()Jia-Ju Bai1-1/+1
The kernel module may sleep with holding a spinlock. The function call paths (from bottom to top) in Linux-4.16 are: [FUNC] usleep_range drivers/net/ethernet/cadence/macb_main.c, 648: usleep_range in macb_halt_tx drivers/net/ethernet/cadence/macb_main.c, 730: macb_halt_tx in macb_tx_error_task drivers/net/ethernet/cadence/macb_main.c, 721: _raw_spin_lock_irqsave in macb_tx_error_task To fix this bug, usleep_range() is replaced with udelay(). This bug is found by my static analysis tool DSAC. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller3-5/+15
Daniel Borkmann says: ==================== pull-request: bpf 2018-09-02 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix one remaining buggy offset override in sockmap's bpf_msg_pull_data() when linearizing multiple scatterlist elements, from Tushar. 2) Fix BPF sockmap's misuse of ULP when a collision with another ULP is found on map update where it would release existing ULP. syzbot found and triggered this couple of times now, fix from John. 3) Add missing xskmap type to bpftool so it will properly show the type on map dump, from Prashant. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02Linux 4.19-rc2v4.19-rc2Linus Torvalds1-1/+1
2018-09-02net/ipv6: Only update MTU metric if it setDavid Ahern1-1/+4
Jan reported a regression after an update to 4.18.5. In this case ipv6 default route is setup by systemd-networkd based on data from an RA. The RA contains an MTU of 1492 which is used when the route is first inserted but then systemd-networkd pushes down updates to the default route without the mtu set. Prior to the change to fib6_info, metrics such as MTU were held in the dst_entry and rt6i_pmtu in rt6_info contained an update to the mtu if any. ip6_mtu would look at rt6i_pmtu first and use it if set. If not, the value from the metrics is used if it is set and finally falling back to the idev value. After the fib6_info change metrics are contained in the fib6_info struct and there is no equivalent to rt6i_pmtu. To maintain consistency with the old behavior the new code should only reset the MTU in the metrics if the route update has it set. Fixes: d4ead6b34b67 ("net/ipv6: move metrics from dst to rt6_info") Reported-by: Jan Janssen <medhefgo@web.de> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net: ethernet: cpsw-phy-sel: prefer phandle for phy selTony Lindgren1-3/+6
The cpsw-phy-sel device is not a child of the cpsw interconnect target module. It lives in the system control module. Let's fix this issue by trying to use cpsw-phy-sel phandle first if it exists and if not fall back to current usage of trying to find the cpsw-phy-sel child. That way the phy sel driver can be a child of the system control module where it belongs in the device tree. Without this fix, we cannot have a proper interconnect target module hierarchy in device tree for things like genpd. Note that deferred probe is mostly not supported by cpsw and this patch does not attempt to fix that. In case deferred probe support is needed, this could be added to cpsw_slave_open() and phy_connect() so they start handling and returning errors. For documenting it, looks like the cpsw-phy-sel is used for all cpsw device tree nodes. It's missing the related binding documentation, so let's also update the binding documentation accordingly. Cc: devicetree@vger.kernel.org Cc: Andrew Lunn <andrew@lunn.ch> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02dt-bindings: net: cpsw: Document cpsw-phy-sel usage but prefer phandleTony Lindgren1-0/+6
The current cpsw usage for cpsw-phy-sel is undocumented but is used for all the boards using cpsw. And cpsw-phy-sel is not really a child of the cpsw device, it lives in the system control module instead. Let's document the existing usage, and improve it a bit where we prefer to use a phandle instead of a child device for it. That way we can properly describe the hardware in dts files for things like genpd. Cc: devicetree@vger.kernel.org Cc: Andrew Lunn <andrew@lunn.ch> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02Merge branch 'igmp-fix-two-incorrect-unsolicit-report-count-issues'David S. Miller1-7/+4
Hangbin Liu says: ==================== igmp: fix two incorrect unsolicit report count issues Just like the subject, fix two minor igmp unsolicit report count issues. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02igmp: fix incorrect unsolicit report count after link down and upHangbin Liu1-4/+2
After link down and up, i.e. when call ip_mc_up(), we doesn't init im->unsolicit_count. So after igmp_timer_expire(), we will not start timer again and only send one unsolicit report at last. Fix it by initializing im->unsolicit_count in igmp_group_added(), so we can respect igmp robustness value. Fixes: 24803f38a5c0b ("igmp: do not remove igmp souce list info when set link down") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02igmp: fix incorrect unsolicit report count when join groupHangbin Liu1-3/+2
We should not start timer if im->unsolicit_count equal to 0 after decrease. Or we will send one more unsolicit report message. i.e. 3 instead of 2 by default. Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02bpf: avoid misuse of psock when TCP_ULP_BPF collides with another ULPJohn Fastabend1-1/+11
Currently we check sk_user_data is non NULL to determine if the sk exists in a map. However, this is not sufficient to ensure the psock or the ULP ops are not in use by another user, such as kcm or TLS. To avoid this when adding a sock to a map also verify it is of the correct ULP type. Additionally, when releasing a psock verify that it is the TCP_ULP_BPF type before releasing the ULP. The error case where we abort an update due to ULP collision can cause this error path. For example, __sock_map_ctx_update_elem() [...] err = tcp_set_ulp_id(sock, TCP_ULP_BPF) <- collides with TLS if (err) <- so err out here goto out_free [...] out_free: smap_release_sock() <- calling tcp_cleanup_ulp releases the TLS ULP incorrectly. Fixes: 2f857d04601a ("bpf: sockmap, remove STRPARSER map_flags and add multi-map support") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-02tools/bpf: bpftool, add xskmap in map typesPrashant Bhole1-0/+1
When listed all maps, bpftool currently shows (null) for xskmap. Added xskmap type in map_type_name[] to show correct type. Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-02bpf: Fix bpf_msg_pull_data()Tushar Dave1-4/+3
Helper bpf_msg_pull_data() mistakenly reuses variable 'offset' while linearizing multiple scatterlist elements. Variable 'offset' is used to find first starting scatterlist element i.e. msg->data = sg_virt(&sg[first_sg]) + start - offset" Use different variable name while linearizing multiple scatterlist elements so that value contained in variable 'offset' won't get overwritten. Fixes: 015632bb30da ("bpf: sk_msg program helper bpf_sk_msg_pull_data") Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-02Merge tag 'devicetree-fixes-for-4.19' of ↵Linus Torvalds2-0/+80
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "A couple of new helper functions in preparation for some tree wide clean-ups. I'm sending these new helpers now for rc2 in order to simplify the dependencies on subsequent cleanups across the tree in 4.20" * tag 'devicetree-fixes-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: Add device_type access helper functions of: add node name compare helper functions of: add helper to lookup compatible child node
2018-09-02Merge tag 'armsoc-fixes' of ↵Linus Torvalds12-188/+213
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "First batch of fixes post-merge window: - A handful of devicetree changes for i.MX2{3,8} to change over to new panel bindings. The platforms were moved from legacy framebuffers to DRM and some development board panels hadn't yet been converted. - OMAP fixes related to ti-sysc driver conversion fallout, fixing some register offsets, no_console_suspend fixes, etc. - Droid4 changes to fix flaky eMMC probing and vibrator DTS mismerge. - Fixed 0755->0644 permissions on a newly added file. - Defconfig changes to make ARM Versatile more useful with QEMU (helps testing). - Enable defconfig options for new TI SoC platform that was merged this window (AM6)" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: defconfig: Enable TI's AM6 SoC platform ARM: defconfig: Update the ARM Versatile defconfig ARM: dts: omap4-droid4: Fix emmc errors seen on some devices ARM: dts: Fix file permission for am335x-osd3358-sm-red.dts ARM: imx_v6_v7_defconfig: Select CONFIG_DRM_PANEL_SEIKO_43WVF1G ARM: mxs_defconfig: Select CONFIG_DRM_PANEL_SEIKO_43WVF1G ARM: dts: imx23-evk: Convert to the new display bindings ARM: dts: imx23-evk: Move regulators outside simple-bus ARM: dts: imx28-evk: Convert to the new display bindings ARM: dts: imx28-evk: Move regulators outside simple-bus Revert "ARM: dts: imx7d: Invert legacy PCI irq mapping" arm: dts: am4372: setup rtc as system-power-controller ARM: dts: omap4-droid4: fix vibrations on Droid 4 bus: ti-sysc: Fix no_console_suspend handling bus: ti-sysc: Fix module register ioremap for larger offsets ARM: OMAP2+: Fix module address for modules using mpu_rt_idx ARM: OMAP2+: Fix null hwmod for ti-sysc debug
2018-09-02Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds21-50/+167
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Speculation: - Make the microcode check more robust - Make the L1TF memory limit depend on the internal cache physical address space and not on the CPUID advertised physical address space, which might be significantly smaller. This avoids disabling L1TF on machines which utilize the full physical address space. - Fix the GDT mapping for EFI calls on 32bit PTI - Fix the MCE nospec implementation to prevent #GP Fixes and robustness: - Use the proper operand order for LSL in the VDSO - Prevent NMI uaccess race against CR3 switching - Add a lockdep check to verify that text_mutex is held in text_poke() functions - Repair the fallout of giving native_restore_fl() a prototype - Prevent kernel memory dumps based on usermode RIP - Wipe KASAN shadow stack before rewinding the stack to prevent false positives - Move the AMS GOTO enforcement to the actual build stage to allow user API header extraction without a compiler - Fix a section mismatch introduced by the on demand VDSO mapping change Miscellaneous: - Trivial typo, GCC quirk removal and CC_SET/OUT() cleanups" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pti: Fix section mismatch warning/error x86/vdso: Fix lsl operand order x86/mce: Fix set_mce_nospec() to avoid #GP fault x86/efi: Load fixmap GDT in efi_call_phys_epilog() x86/nmi: Fix NMI uaccess race against CR3 switching x86: Allow generating user-space headers without a compiler x86/dumpstack: Don't dump kernel memory based on usermode RIP x86/asm: Use CC_SET()/CC_OUT() in __gen_sigismember() x86/alternatives: Lockdep-enforce text_mutex in text_poke*() x86/entry/64: Wipe KASAN stack shadow before rewind_stack_do_exit() x86/irqflags: Mark native_restore_fl extern inline x86/build: Remove jump label quirk for GCC older than 4.5.2 x86/Kconfig: Fix trivial typo x86/speculation/l1tf: Increase l1tf memory limit for Nehalem+ x86/spectre: Add missing family 6 check to microcode check
2018-09-02Merge branch 'smp-urgent-for-linus' of ↵Linus Torvalds1-22/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull CPU hotplug fix from Thomas Gleixner: "Remove the stale skip_onerr member from the hotplug states" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Remove skip_onerr field from cpuhp_step structure
2018-09-02Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds11-13/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core fixes from Thomas Gleixner: "A small set of updates for core code: - Prevent tracing in functions which are called from trace patching via stop_machine() to prevent executing half patched function trace entries. - Remove old GCC workarounds - Remove pointless includes of notifier.h" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Remove workaround for unreachable warnings from old GCC notifier: Remove notifier header file wherever not used watchdog: Mark watchdog touch functions as notrace
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-04 23:09:59 +0000