summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2013-03-18net: ep93xx_eth: Use module_platform_driver()Sachin Kamat1-12/+1
module_platform_driver macro removes some boilerplate and makes the code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-18net: dm9000: Use module_platform_driver()Sachin Kamat1-16/+1
module_platform_driver macro removes some boilerplate and makes the code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-18net: neterion: replace ip_fast_csum with csum_replace2Li RongQing1-4/+2
replace ip_fast_csum with csum_replace2 to save cpu cycles Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17tcp: Remove TCPCTChristoph Paasch18-841/+38
TCPCT uses option-number 253, reserved for experimental use and should not be used in production environments. Further, TCPCT does not fully implement RFC 6013. As a nice side-effect, removing TCPCT increases TCP's performance for very short flows: Doing an apache-benchmark with -c 100 -n 100000, sending HTTP-requests for files of 1KB size. before this patch: average (among 7 runs) of 20845.5 Requests/Second after: average (among 7 runs) of 21403.6 Requests/Second Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17drivers: net: irda: use resource_size() in au1k_ir.cSilviu-Mihai Popescu1-2/+3
This uses the resource_size() function instead of explicit computation. Signed-off-by: Silviu-Mihai Popescu <silviupopescu1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17sfc: make local functions staticstephen hemminger2-5/+5
Trivial sparse detected functions that should be static. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17net: fix some typos in netif featuresCong Wang1-2/+2
Cc: Pravin B Shelar <pshelar@nicira.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17Merge branch 'master' of ↵David S. Miller5-26/+19
git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch Conflicts: net/openvswitch/vport-internal_dev.c Jesse Gross says: ==================== A couple of minor enhancements for net-next/3.10. The largest is an extension to allow variable length metadata to be passed to userspace with packets. There is a merge conflict in net/openvswitch/vport-internal_dev.c: A existing commit modifies internal_dev_mac_addr() and a new commit deletes it. The new one is correct, so you can just remove that function. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17drivers:net: dma_alloc_coherent: use __GFP_ZERO instead of memset(, 0)Joe Perches38-168/+104
Reduce the number of calls required to alloc a zeroed block of memory. Trivially reduces overall object size. Other changes around these removals o Neaten call argument alignment o Remove an unnecessary OOM message after dma_alloc_coherent failure o Remove unnecessary gfp_t stack variable Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17netpoll: use DEFINE_STATIC_SRCU() to define netpoll_srcuLai Jiangshan1-2/+1
DEFINE_STATIC_SRCU() defines srcu struct and do init at build time. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17vxlan: generalize forwarding tablesDavid Stevens3-58/+210
This patch generalizes VXLAN forwarding table entries allowing an administrator to: 1) specify multiple destinations for a given MAC 2) specify alternate vni's in the VXLAN header 3) specify alternate destination UDP ports 4) use multicast MAC addresses as fdb lookup keys 5) specify multicast destinations 6) specify the outgoing interface for forwarded packets The combination allows configuration of more complex topologies using VXLAN encapsulation. Changes since v1: rebase to 3.9.0-rc2 Signed-Off-By: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17caif: remove caif_shmErwan Yvin5-909/+0
caif_shm is an old implementation caif_shm will be replaced by caif_virtio [ As explained by Linus Walleij: "U5500 used this, but was cancelled and the silicon did not reach anyone outside ST-Ericsson. Then for the next platforms, we have gone for the leaner & cleaner approach of using virtio, rpmesg and rproc." ] Signed-off-by: Erwan Yvin <erwan.yvin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sjur Brendeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15ipv4: replace ip_fast_csum with csum_replace2Li RongQing1-3/+2
replace ip_fast_csum with csum_replace2 to save cpu cycles Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15driver/qlogic: replace ip_fast_csum with csum_replace2Li RongQing2-6/+5
replace ip_fast_csum with csum_replace2 to save cpu cycles Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15Documentation: fix neigh/default/gc_thresh1 default value.Li RongQing1-1/+1
The default value is 128, not 256 #grep gc_thresh1 net/ -rI net/decnet/dn_neigh.c: .gc_thresh1 = 128, net/ipv6/ndisc.c: .gc_thresh1 = 128, net/ipv4/arp.c: .gc_thresh1 = 128, Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15drivers:net: Remove dma_alloc_coherent OOM messagesJoe Perches42-278/+122
I believe these error messages are already logged on allocation failure by warn_alloc_failed and so get a dump_stack on OOM. Remove the unnecessary additional error logging. Around these deletions: o Alignment neatening. o Remove unnecessary casts of dma_alloc_coherent. o Hoist assigns from ifs. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15be2net: Use new F/W mailbox cmd to manipulate interrupts.Somnath Kotur3-8/+50
This is needed as the earlier method of manipulating this register via PCI Config space is disallowed by certain Hypervisors. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15be2net: enable interrupts in be_probe() (RoCE and other ULPs need them)Somnath Kotur1-11/+10
As the NIC PCI function may be used by other protocols, the chip interrupts must be enabled in be_probe() itself rather than be_open(). Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15net: clean leftover of COMPAT_NET_DEV_OPS removalFernando Luis Vazquez Cao1-1/+0
COMPAT_NET_DEV_OPS was removed a while back and with it the definition of netdev_resync_ops() went away. Let's finish the clean-up. Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15VSOCK: Support VM sockets connected to the hypervisor.Reilly Grant2-3/+16
The resource ID used for VM socket control packets (0) is already used for the VMCI_GET_CONTEXT_ID hypercall so a new ID (15) must be used when the guest sends these datagrams to the hypervisor. The hypervisor context ID must also be removed from the internal blacklist. Signed-off-by: Reilly Grant <grantr@vmware.com> Acked-by: Andy King <acking@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15netxen: write IP address to firmware when using bondingnikolay@redhat.com3-78/+155
This patch allows LRO aggregation on bonded devices that contain an NX3031 device. It also adds a for_each_netdev_in_bond_rcu(bond, slave) macro which executes for each slave that has bond as master. V3: After testing and discussing this with Rajesh, I decided to keep the vlan ip cache and just rename it to ip_cache since it will store bond ip addresses too. A new master flag has been added to the ip cache to denote that the address has been added because of a master device. I've taken care of the enslave/release cases by checking for various combinations of events and flags (e.g. netxen has a master, it's a bond master and it's not marked as a slave means it is being enslaved and is dev_open()ed in bond_enslave). I've changed netxen_free_ip_list() to have a "master" parameter which causes all IP addresses marked as master to be deleted (used when a netxen is being released). I've made the patch use the new upper device API as well. The following cases were tested: - bond -> netxen - vlan -> netxen - vlan -> bond -> netxen V2: Remove local ip caching, retrieve addresses dynamically and restore them if necessary. Note: Tested with NX3031 adapter. Tested-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Andy Gospodarek <agospoda@redhat.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller19-65/+2259
Included changes: - introduction of the new Network Coding component. This new mechanism aims to increase throughput by fusing multiple packets in one transmission. - minor cleanups Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14csiostor: Cleanup chip specific operations.Arvind Bhushan6-512/+193
This patch removes chip specific operations from the common hardware paths, as well as the Makefile change to accomodate the new files. Signed-off-by: Arvind Bhushan <arvindb@chelsio.com> Signed-off-by: Naresh Kumar Inna <naresh@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14csiostor: Header file modifications for chip support and bug fixes.Arvind Bhushan5-18/+212
This patch defines the common operations to support multiple chips. It includes common header file modifications to support the current chips (T4 and T5). It also includes the following bug fixes: - reconfirms the rnode state after an implicit logo. - corrects the stats array size. - sets up and checks flags correctly when coming up as master and finding the card initialized Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Arvind Bhushan <arvindb@chelsio.com> Signed-off-by: Naresh Kumar Inna <naresh@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14csiostor: Add T5 adapter operations.Arvind Bhushan1-0/+397
This patch creates a new file for T5 adapter operations. Signed-off-by: Arvind Bhushan <arvindb@chelsio.com> Signed-off-by: Naresh Kumar Inna <naresh@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14csiostor: Segregate T4 adapter operations.Arvind Bhushan1-0/+403
This patch separates T4 adapter operations into a new file. Signed-off-by: Arvind Bhushan <arvindb@chelsio.com> Signed-off-by: Naresh Kumar Inna <naresh@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14RDMA/cxgb4: Fix onchip queue support for T5Vipul Pandya1-8/+5
T5 adapter does not support onchip queue memory. Present logic fails to allocate QP for T5 and returns an error. Also, if module parameter ocqp_support is zero then we are unable to allocate QP which should not be the case. Ideally if ocqp_support parameter is 0 or onchip queue support is disable then host QP should be allocated before returning an error. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14RDMA/cxgb4: Bump tcam_full stat and WR reply timeoutVipul Pandya2-2/+2
Always bump the tcam_full stat. Also, bump wr reply timeout to 30 seconds. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14RDMA/cxgb4: Map pbl buffers for dma if using DSGL.Vipul Pandya1-6/+23
Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14RDMA/cxgb4: Use DSGLs for fastreg and adapter memory writes for T5.Vipul Pandya5-36/+190
It enables direct DMA by HW to memory region PBL arrays and fast register PBL arrays from host memory, vs the T4 way of passing these arrays in the WR itself. The result is lower latency for memory registration, and larger PBL array support for fast register operations. This patch also updates ULP_TX_MEM_WRITE command fields for T5. Ordering bit of ULP_TX_MEM_WRITE is at bit position 22 in T5 and at 23 in T4. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14RDMA/cxgb4: Add module_params to enable DB FC & Coalescing on T5Vipul Pandya3-6/+30
Both DB Flow-Control and DB Coalescing are disabled by default on T5 Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14RDMA/cxgb4: Turn off db coalescing when RDMA QPs are in use.Vipul Pandya4-4/+42
Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14RDMA/cxgb4: Add Support for Chelsio T5 adapterVipul Pandya6-35/+77
Adds support for Chelsio T5 adapter. Enables T5's Write Combining feature. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14cxgb4vf: Add support for Chelsio T5 adapterSantosh Rastapur5-9/+73
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14cxgb4: Disable SR-IOV support for PF4-7 for T5Santosh Rastapur2-19/+10
All T5 adapters will only support VFs on PF0-3 despite the ability of the hardware to support them on PF4-7. This keeps our T4 and T5 adapters more similar which simplifies host driver software. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14cxgb4: Update driver version and descriptionSantosh Rastapur1-2/+2
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14cxgb4: Add T5 PCI idsSantosh Rastapur1-0/+38
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14cxgb4: Add T5 debugfs supportSantosh Rastapur3-43/+119
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14cxgb4: Enable doorbell drop recovery only for T4 adapterSantosh Rastapur1-16/+71
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14cxgb4: Add T5 write combining supportSantosh Rastapur3-5/+102
This patch implements a low latency Write Combining (aka Write Coalescing) work request path. PCIE maps User Space Doorbell BAR2 region writes to the new interface to SGE. SGE pulls a new message from PCIE new interface and if its a coalesced write work request then pushes it for processing. This patch copies coalesced work request to memory mapped BAR2 space. Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14cxgb4: Dump T5 registersSantosh Rastapur1-4/+448
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14cxgb4: Initialize T5Santosh Rastapur4-48/+227
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14cxgb4: Add macros, structures and inline functions for T5Santosh Rastapur3-2/+95
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14cxgb4: Add register definations for T5Santosh Rastapur1-0/+94
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-13batman-adv: network coding - receive coded packets and decode themMartin Hundebøll3-0/+246
When receiving a network coded packet, the decoding buffer is searched for a packet to use for decoding. The source, destination, and crc32 from the coded packet is used to identify the wanted packet. The decoded packet is passed to the usual unicast receiver function, as had it never been network coded. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-13batman-adv: network coding - save overheard and tx packets for decodingMartin Hundebøll6-3/+253
To be able to decode a network coded packet, a node must already know one of the two coded packets. This is done by buffering skbs before transmission and buffering packets sniffed with promiscuous mode from other hosts. Packets are kept in a buffer similar to the one with forward-skbs: A hash table, where each entry, which corresponds to a src-dst pair, has a linked list packets. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-13batman-adv: network coding - code and transmit packets if possibleMartin Hundebøll5-0/+466
Before adding forward-skbs to the coding buffer, the buffer is searched for a potential coding opportunity. If one is found, the two packets are network coded and transmitted right away. If not, the forward-skb is added to the buffer. Network coded packets are transmitted with information about the two receivers and the two coded packets. The first receiver is given by the MAC header, while the second is given in the payload/bat-header. The second receiver uses promiscuous mode to receive the packet and check the second destination. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-13batman-adv: network coding - buffer unicast packets before forwardMartin Hundebøll4-7/+557
Two be able to network code two packets, one packet must be buffered until the next is available. This is done in a "coding buffer", which is essentially a hash table with lists of packets. Each entry in the hash table corresponds to a specific src-dst pair, which has a linked list of packets that are buffered. This patch adds skbs to the buffer just before forwarding them. The buffer is traversed every 10 ms, where timed skbs are removed from the buffer and transmitted. To allow experiments with the network coding scheme, the timeout is tunable through a file in debugfs. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-13batman-adv: network coding - detect coding nodes and remove these after timeoutMartin Hundebøll7-0/+524
To use network coding efficiently, a relay must know when neighbor nodes are likely to have enough information to be able to decode a network coded packet. This is detected by using OGMs from batman-adv to discover when one neighbor is in range of another neighbor. The relay check the TLL to detect when an OGM is forwarded from one neighbor by another neighbor, and thereby knows that the two neighbors are in range and thus overhear packets sent by each other. This information is saved in the orig_node struct to be used when searching for coding opportunities. Two lists are added to the orig_node struct: One for neighbors that can hear the orig_node (outgoing nc_nodes) and one for neighbors that the orig_node can hear (incoming nc_nodes). Information about nc_nodes is kept for 10 seconds and is available through debugfs in batman_adv/nc_nodes to use when debugging network coding. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-13batman-adv: network coding - add the initial infrastructure codeMartin Hundebøll10-1/+184
Network coding exploits the 802.11 shared medium to allow multiple packets to be sent in a single transmission. In brief, a relay can XOR two packets, and send the coded packet to two destinations. The receivers can decode one of the original packets by XOR'ing the coded packet with the other original packet. This will lead to increased throughput in topologies where two packets cross one relay. In a simple topology with three nodes, it takes four transmissions without network coding to get one packet from Node A to Node B and one from Node B to Node A: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <--- p2 ---- Node R Node B 4. Node A Node R ---- p1 ---> Node B With network coding, the relay only needs one transmission, which saves us one slot of valuable airtime: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <- p1 x p2 - Node R - p1 x p2 -> Node B The same principle holds for a topology including five nodes. Here the packets from Node A and Node B are overheard by Node C and Node D, respectively. This allows Node R to send a network coded packet to save one transmission: Node A Node B | \ / | | p1 p2 | | \ / | p1 > Node R < p2 | | | / \ | | p1 x p2 p1 x p2 | v / \ v / \ Node C < > Node D More information is available on the open-mesh.org wiki[1]. This patch adds the initial code to support network coding in batman-adv. It sets up a worker thread to do house keeping and adds a sysfs file to enable/disable network coding. The feature is disabled by default, as it requires a wifi-driver with working promiscuous mode, and also because it adds a small delay at each hop. [1] http://www.open-mesh.org/projects/batman-adv/wiki/Catwoman Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 02:27:36 +0000