summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-11-28can: rcar: add SPDX identifiers to Kconfig and MakefileKuninori Morimoto2-0/+2
This patch adds SPDX-License-Identifier to Kconfig and Makefile. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-11-28can: rcar: use SPDX identifier for Renesas driversWolfram Sang2-10/+2
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-11-28can: sja1000: plx_pci: add support for ASEM CAN raw deviceFlavio Suligoi2-1/+65
This patch adds support for ASEM opto-isolated dual channels CAN raw device (http://www.asem.it) Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-11-28can: xilinx: add can 2.0 supportShubhrajyoti Datta1-1/+33
Add support for can 2.0. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-11-28dt-bindings: can: xilinx_can: add Xilinx CAN FD 2.0 bindingsShubhrajyoti Datta1-0/+1
Add compatible string and new attributes to support the Xilinx CAN FD 2.0. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-11-28can: xilinx: fix return type of ndo_start_xmit functionYueHaibing1-1/+1
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-11-28can: ucan: fix spelling mistake: "resumbmitting" -> "resubmitting"Colin Ian King1-1/+1
Trivial fix to spelling mistake in netdev_dbg error message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-11-27net/ipv4: Fix missing raw_init when CONFIG_PROC_FS is disabledDavid Ahern1-1/+1
Randy reported when CONFIG_PROC_FS is not enabled: ld: net/ipv4/af_inet.o: in function `inet_init': af_inet.c:(.init.text+0x42d): undefined reference to `raw_init' Fix by moving the endif up to the end of the proc entries Fixes: 6897445fb194c ("net: provide a sysctl raw_l3mdev_accept for raw socket lookup with VRFs") Reported-by: Randy Dunlap <rdunlap@infradead.org> Cc: Mike Manning <mmanning@vyatta.att-mail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27Merge branch 'bnx2x-Popoulate-firmware-versions-in-driver-info-query'David S. Miller2-1/+34
Sudarsana Reddy Kalluru says: ==================== bnx2x: Popoulate firmware versions in driver info query. The patch series populates MBI and storm firware versions in the ethtool driver info query. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27bnx2x: Add storm FW version to ethtool driver query output.Sudarsana Reddy Kalluru1-0/+6
The patch populates the Storm FW version in the ethtool driver query data. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27bnx2x: Add MBI version to ethtool driver query output.Sudarsana Reddy Kalluru2-1/+28
The patch populates the MBI version in the ethtool driver query data. Adding 'extended_dev_info_shared_cfg' structure describing the nvram structure, this is required to access the mbi version string. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27tcp: remove hdrlen argument from tcp_queue_rcv()Eric Dumazet1-7/+6
Only one caller needs to pull TCP headers, so lets move __skb_pull() to the caller side. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27net/ncsi: Add NCSI Mellanox OEM commandVijay Khemka4-2/+81
This patch adds OEM Mellanox commands and response handling. It also defines OEM Get MAC Address handler to get and configure the device. ncsi_oem_gma_handler_mlx: This handler send NCSI mellanox command for getting mac address. ncsi_rsp_handler_oem_mlx: This handles response received for all mellanox OEM commands. ncsi_rsp_handler_oem_mlx_gma: This handles get mac address response and set it to device. Signed-off-by: Vijay Khemka <vijaykhemka@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27r8169: remove unneeded mmiowb barriersHeiner Kallweit1-7/+1
writex() has implicit barriers, that's what makes it different from writex_relaxed(). Therefore these calls to mmiowb() can be removed. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27net: hns3: Config NIC port speed same as that of optical modulePeng Li3-60/+49
Port 0/1 of HiP08 supports 10G and 25G. This patch adds a change to configure NIC port speed same as that of optical module(SFP/QFSP). Driver gets the optical module speed and sets NIC port speed accordingly. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27Merge branch 'net-nsid-interpretation'David S. Miller2-26/+135
Nicolas Dichtel says: ==================== Ease to interpret net-nsid The goal of this series is to ease the interpretation of nsid received in netlink messages from other netns (when the user uses NETLINK_F_LISTEN_ALL_NSID). After this series, with a patched iproute2: $ ip netns add foo $ ip netns add bar $ touch /var/run/netns/init_net $ mount --bind /proc/1/ns/net /var/run/netns/init_net $ ip netns set init_net 11 $ ip netns set foo 12 $ ip netns set bar 13 $ ip netns init_net (id: 11) bar (id: 13) foo (id: 12) $ ip -n foo netns set init_net 21 $ ip -n foo netns set foo 22 $ ip -n foo netns set bar 23 $ ip -n foo netns init_net (id: 21) bar (id: 23) foo (id: 22) $ ip -n bar netns set init_net 31 $ ip -n bar netns set foo 32 $ ip -n bar netns set bar 33 $ ip -n bar netns init_net (id: 31) bar (id: 33) foo (id: 32) $ ip netns list-id target-nsid 12 nsid 21 current-nsid 11 (iproute2 netns name: init_net) nsid 22 current-nsid 12 (iproute2 netns name: foo) nsid 23 current-nsid 13 (iproute2 netns name: bar) $ ip -n bar netns list-id target-nsid 32 nsid 31 nsid 21 current-nsid 31 (iproute2 netns name: init_net) v3 -> v4: - patch 5/5: fix imbalance lock in error path v2 -> v3: - patch 5/5: account NETNSA_CURRENT_NSID in rtnl_net_get_size() v1 -> v2: - patch 1/5: remove net from struct rtnl_net_dump_cb - patch 2/5: new in this version - patch 3/5: use a bool to know if rtnl_get_net_ns_capable() was called - patch 5/5: use struct net_fill_args ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27netns: enable to dump full nsid translation tableNicolas Dichtel2-6/+27
Like the previous patch, the goal is to ease to convert nsids from one netns to another netns. A new attribute (NETNSA_CURRENT_NSID) is added to the kernel answer when NETNSA_TARGET_NSID is provided, thus the user can easily convert nsids. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27netns: enable to specify a nsid for a get requestNicolas Dichtel1-0/+5
Combined with NETNSA_TARGET_NSID, it enables to "translate" a nsid from one netns to a nsid of another netns. This is useful when using NETLINK_F_LISTEN_ALL_NSID because it helps the user to interpret a nsid received from an other netns. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27netns: add support of NETNSA_TARGET_NSIDNicolas Dichtel2-11/+76
Like it was done for link and address, add the ability to perform get/dump in another netns by specifying a target nsid attribute. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27netns: introduce 'struct net_fill_args'Nicolas Dichtel1-14/+34
This is a preparatory work. To avoid having to much arguments for the function rtnl_net_fill(), a new structure is defined. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27netns: remove net arg from rtnl_net_fill()Nicolas Dichtel1-6/+4
This argument is not used anymore. Fixes: cab3c8ec8d57 ("netns: always provide the id to rtnl_net_fill()") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27Merge branch 'qed-enhancements-series'David S. Miller7-51/+71
Sudarsana Reddy Kalluru says: ==================== qed* enhancements series The patch series add few enhancements to qed/qede drivers. Changes from previous versions: ------------------------------- v3: Revert v2 changes as the other paths (i.e. ptp) access the same data in atomic context. v2: Use __set_bit()/__clear_bit() where data access doesn't need to be atomic. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27qed: Add support for MBI upgrade over MFW.Sudarsana Reddy Kalluru4-34/+40
The patch adds driver support for MBI image update through MFW. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27qede: Update link status only when interface is ready.Sudarsana Reddy Kalluru2-2/+7
In the case of internal reload (e.g., mtu change), there could be a race between link-up notification from mfw and the driver unload processing. In such case kernel assumes the link is up and starts using the queues which leads to the server crash. Send link notification to the kernel only when driver has already requested MFW for the link. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27qede: Simplify the usage of qede-flags.Sudarsana Reddy Kalluru3-8/+11
The values represented by qede->flags is being used in mixed ways: 1. As 'value' at some places e.g., QEDE_FLAGS_IS_VF usage 2. As bit-mask(value) at some places e.g., QEDE_FLAGS_PTP_TX_IN_PRORGESS usage. This implementation pose problems in future when we want to add more flag values e.g., overlap of the values, overflow of 64-bit storage. Updated the implementation to go with approach (2) for qede->flags. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27qed: Display port_id in the UFP debug messages.Sudarsana Reddy Kalluru1-7/+13
MFW sends UFP notifications mostly during the device init phase and PFs might not be assigned with a name by this time. Hence capturing port-id in the debug messages would help in finding which PF the ufp notification was sent to. Also, fixed a minor scemantic issue in a debug print. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27Merge branch 'aquantia-usb'David S. Miller5-0/+1728
Igor Russkikh says: ==================== Add support for Aquantia AQtion USB to 5/2.5GbE devices This patchset introduces support for new multigig ethernet to USB dongle, developed jointly by Aquantia (Phy) and ASIX (USB MAC). The driver has similar structure with other ASIX MAC drivers (AX88179), but with a number of important differences: - Driver supports both direct Phy and custom firmware interface for Phy programming. This is due to different firmware modules available with this product. - Driver handles new 2.5G/5G link speed configuration and reporting. - Device support all speeds from 100M up to 5G. - Device supports MTU up to 16K. Device supports various standard networking features, like checksum offloads, vlan tagging/filtering, TSO. The code of this driver is based on original ASIX sources and was extended by Aquantia for 5G multigig support. Patchset v2 includes following changes: - Function variables declarions fixed to reverse xmass tree - Improve patch layout structure - Remove unnecessary curly braces in switch/case statements - Use 'packed' attribute for HW structures only - Use eth_mac_addr function in set_mac_addr callback - Remove unnecessary 'memset' calls. - Read MAC address from EEPROM function has now better name - Use driver_priv field to store context. It avoids ugly cast. - Set max_mtu field. Remove check for MTU size - Rewrite read/write functions. Add helpers for read/write 16/32 bit values - Use mask and shifts instead of bitfields to support BE platforms. - Use stack allocated buffer for configuring mcast filters - Use AUTONEG_ENABLE when go to suspend state - Pad out wol_cfg field from context structure. Use stack allocated instead - Remove driver version - Check field 'duplex' in set_link_ksetting callback as well - Use already created defines in usb matching macro - Rename phy_ops struct to phy_cfg - Use ether_addr_copy for copying mac address - Add fall-through comment in switch/case for avoid checkpatch warning - Remove match for CDC ether device - Add ASIX's HW id-s to match this driver - Add all HW id-s with which driver can work to blacklist of cdc_ether driver Patchset v3 includes following changes: - Use linkmode_copy instead of bitmap_copy - Remove Direct PHY access code since production HW will not have this mode anymore - Fix line over 80 symbols and alignments in cdc_ether patch - Add match for ECM configuration On start our HW reports both ECM and vendor configs. Linux prefers to use ECM driver and chooses active configuration which is for ecm driver (not for vendor specific). We need to match this configuration and forcibly switch configuration to vendor specific. Patchset v4 includes following changes: - Set gso_max_size. - Optimize accessing to descriptors - Use SKB_TRUESIZE macro. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27net: usb: aqc111: Extend cdc_ether blacklistDmitry Bezrukov1-0/+26
Added Aquantia and ASIX device IDs to prevent loading cdc_ether for these devices. Our firmware reports CDC configuration simultaneously with vendor specific. Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27net: usb: aqc111: Add ASIX's HW idsDmitry Bezrukov1-0/+40
It enables driver for ASIX products which are also based on aqc111/112U chips. Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27net: usb: aqc111: Add support for wake on LAN by MAGIC packetDmitry Bezrukov2-0/+192
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27net: usb: aqc111: Implement get/set_link_ksettings callbacksDmitry Bezrukov1-0/+124
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27net: usb: aqc111: Initialize ethtool_ops structureDmitry Bezrukov1-0/+28
Implement get_drvinfo, set/get_msglevel, get_link callbacks Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27net: usb: aqc111: Add RX VLAN filtering supportDmitry Bezrukov2-1/+90
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27net: usb: aqc111: Add support for VLAN_CTAG_TX/RX offloadDmitry Bezrukov2-1/+28
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27net: usb: aqc111: Implement set_rx_mode callbackDmitry Bezrukov2-5/+71
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27net: usb: aqc111: Add support for TSODmitry Bezrukov2-2/+12
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27net: usb: aqc111: Add support for enable/disable checksum offloadDmitry Bezrukov2-1/+45
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27net: usb: aqc111: Add support for changing MTUDmitry Bezrukov1-1/+59
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27net: usb: aqc111: Add checksum offload supportDmitry Bezrukov2-2/+52
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27net: usb: aqc111: Implement RX data pathDmitry Bezrukov2-0/+117
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27net: usb: aqc111: Implement TX data pathDmitry Bezrukov2-0/+80
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27net: usb: aqc111: Add support for getting and setting of MAC addressDmitry Bezrukov2-0/+48
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27net: usb: aqc111: Introduce link managementDmitry Bezrukov2-0/+248
Add full hardware initialization sequence and link configuration logic Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27net: usb: aqc111: Introduce PHY accessDmitry Bezrukov2-0/+98
Add helpers to write 32bit values. Implement PHY power up/down sequences. AQC111, PHY is being controlled via vendor command interface. Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27net: usb: aqc111: Various callbacks implementationDmitry Bezrukov2-0/+177
Reset, stop callbacks, driver unbind callback. More register defines required for these callbacks. Add helpers to read/write 16bit values Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27net: usb: aqc111: Add implementation of read and write commandsDmitry Bezrukov2-0/+110
Read/write command register defines and functions Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27net: usb: aqc111: Add bind and empty unbind callbacksDmitry Bezrukov1-0/+35
Initialize net_device_ops structure Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27net: usb: aqc111: Driver skeleton for Aquantia AQtion USB to 5GbEDmitry Bezrukov3-0/+61
Initialize usb_driver structure skeleton Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27add documents for snmp countersyupeng1-0/+202
Add explaination of below counters: TcpExtTCPRcvCoalesce TcpExtTCPAutoCorking TcpExtTCPOrigDataSent TCPSynRetrans TCPFastOpenActiveFail TcpExtListenOverflows TcpExtListenDrops TcpExtTCPHystartTrainDetect TcpExtTCPHystartTrainCwnd TcpExtTCPHystartDelayDetect TcpExtTCPHystartDelayCwnd Signed-off-by: yupeng <yupeng0921@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27Merge branch 'mlxsw-Prepare-for-VLAN-aware-bridge-w-VxLAN'David S. Miller5-10/+63
Ido Schimmel says: ==================== mlxsw: Prepare for VLAN-aware bridge w/VxLAN The driver is using 802.1Q filtering identifiers (FIDs) to represent the different VLANs in the VLAN-aware bridge (only one is supported). However, the device cannot assign a VNI to such FIDs, which prevents the driver from supporting the enslavement of VxLAN devices to the VLAN-aware bridge. This patchset works around this limitation by emulating 802.1Q FIDs using 802.1D FIDs, which can be assigned a VNI and so far have only been used in conjunction with VLAN-unaware bridges. The downside of this approach is that multiple {Port,VID}->FID entries are required, whereas a single VID->FID entry is required with "true" 802.1Q FIDs. First four patches introduce the new FID family of emulated 802.1Q FIDs and the associated type of router interfaces (RIFs). Last patch flips the driver to use this new FID family. The diff is relatively small because the internal implementation of each FID family is contained and hidden in spectrum_fid.c. Different internal users (e.g., bridge, router) are aware of the different FID types, but do not care about their internal implementation. This makes it trivial to swap the current implementation of 802.1Q FIDs with the new one, using 802.1D FIDs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-17 07:11:59 +0000