summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-01-28tcp: fix tcp_mark_head_lost to check skb len before fragmentingNeal Cardwell1-5/+5
This commit fixes a corner case in tcp_mark_head_lost() which was causing the WARN_ON(len > skb->len) in tcp_fragment() to fire. tcp_mark_head_lost() was assuming that if a packet has tcp_skb_pcount(skb) of N, then it's safe to fragment off a prefix of M*mss bytes, for any M < N. But with the tricky way TCP pcounts are maintained, this is not always true. For example, suppose the sender sends 4 1-byte packets and have the last 3 packet sacked. It will merge the last 3 packets in the write queue into an skb with pcount = 3 and len = 3 bytes. If another recovery happens after a sack reneging event, tcp_mark_head_lost() may attempt to split the skb assuming it has more than 2*MSS bytes. This sounds very counterintuitive, but as the commit description for the related commit c0638c247f55 ("tcp: don't fragment SACKed skbs in tcp_mark_head_lost()") notes, this is because tcp_shifted_skb() coalesces adjacent regions of SACKed skbs, and when doing this it preserves the sum of their packet counts in order to reflect the real-world dynamics on the wire. The c0638c247f55 commit tried to avoid problems by not fragmenting SACKed skbs, since SACKed skbs are where the non-proportionality between pcount and skb->len/mss is known to be possible. However, that commit did not handle the case where during a reneging event one of these weird SACKed skbs becomes an un-SACKed skb, which tcp_mark_head_lost() can then try to fragment. The fix is to simply mark the entire skb lost when this happens. This makes the recovery slightly more aggressive in such corner cases before we detect reordering. But once we detect reordering this code path is by-passed because FACK is disabled. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28inet: frag: Always orphan skbs inside ip_defrag()Joe Stringer2-2/+1
Later parts of the stack (including fragmentation) expect that there is never a socket attached to frag in a frag_list, however this invariant was not enforced on all defrag paths. This could lead to the BUG_ON(skb->sk) during ip_do_fragment(), as per the call stack at the end of this commit message. While the call could be added to openvswitch to fix this particular error, the head and tail of the frags list are already orphaned indirectly inside ip_defrag(), so it seems like the remaining fragments should all be orphaned in all circumstances. kernel BUG at net/ipv4/ip_output.c:586! [...] Call Trace: <IRQ> [<ffffffffa0205270>] ? do_output.isra.29+0x1b0/0x1b0 [openvswitch] [<ffffffffa02167a7>] ovs_fragment+0xcc/0x214 [openvswitch] [<ffffffff81667830>] ? dst_discard_out+0x20/0x20 [<ffffffff81667810>] ? dst_ifdown+0x80/0x80 [<ffffffffa0212072>] ? find_bucket.isra.2+0x62/0x70 [openvswitch] [<ffffffff810e0ba5>] ? mod_timer_pending+0x65/0x210 [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90 [<ffffffffa03205a2>] ? nf_conntrack_in+0x252/0x500 [nf_conntrack] [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70 [<ffffffffa02051a3>] do_output.isra.29+0xe3/0x1b0 [openvswitch] [<ffffffffa0206411>] do_execute_actions+0xe11/0x11f0 [openvswitch] [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70 [<ffffffffa0206822>] ovs_execute_actions+0x32/0xd0 [openvswitch] [<ffffffffa020b505>] ovs_dp_process_packet+0x85/0x140 [openvswitch] [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70 [<ffffffffa02068a2>] ovs_execute_actions+0xb2/0xd0 [openvswitch] [<ffffffffa020b505>] ovs_dp_process_packet+0x85/0x140 [openvswitch] [<ffffffffa0215019>] ? ovs_ct_get_labels+0x49/0x80 [openvswitch] [<ffffffffa0213a1d>] ovs_vport_receive+0x5d/0xa0 [openvswitch] [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90 [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90 [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90 [<ffffffffa0214895>] ? internal_dev_xmit+0x5/0x140 [openvswitch] [<ffffffffa02148fc>] internal_dev_xmit+0x6c/0x140 [openvswitch] [<ffffffffa0214895>] ? internal_dev_xmit+0x5/0x140 [openvswitch] [<ffffffff81660299>] dev_hard_start_xmit+0x2b9/0x5e0 [<ffffffff8165fc21>] ? netif_skb_features+0xd1/0x1f0 [<ffffffff81660f20>] __dev_queue_xmit+0x800/0x930 [<ffffffff81660770>] ? __dev_queue_xmit+0x50/0x930 [<ffffffff810b53f1>] ? mark_held_locks+0x71/0x90 [<ffffffff81669876>] ? neigh_resolve_output+0x106/0x220 [<ffffffff81661060>] dev_queue_xmit+0x10/0x20 [<ffffffff816698e8>] neigh_resolve_output+0x178/0x220 [<ffffffff816a8e6f>] ? ip_finish_output2+0x1ff/0x590 [<ffffffff816a8e6f>] ip_finish_output2+0x1ff/0x590 [<ffffffff816a8cee>] ? ip_finish_output2+0x7e/0x590 [<ffffffff816a9a31>] ip_do_fragment+0x831/0x8a0 [<ffffffff816a8c70>] ? ip_copy_metadata+0x1b0/0x1b0 [<ffffffff816a9ae3>] ip_fragment.constprop.49+0x43/0x80 [<ffffffff816a9c9c>] ip_finish_output+0x17c/0x340 [<ffffffff8169a6f4>] ? nf_hook_slow+0xe4/0x190 [<ffffffff816ab4c0>] ip_output+0x70/0x110 [<ffffffff816a9b20>] ? ip_fragment.constprop.49+0x80/0x80 [<ffffffff816aa9f9>] ip_local_out+0x39/0x70 [<ffffffff816abf89>] ip_send_skb+0x19/0x40 [<ffffffff816abfe3>] ip_push_pending_frames+0x33/0x40 [<ffffffff816df21a>] icmp_push_reply+0xea/0x120 [<ffffffff816df93d>] icmp_reply.constprop.23+0x1ed/0x230 [<ffffffff816df9ce>] icmp_echo.part.21+0x4e/0x50 [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70 [<ffffffff810d5f9e>] ? rcu_read_lock_held+0x5e/0x70 [<ffffffff816dfa06>] icmp_echo+0x36/0x70 [<ffffffff816e0d11>] icmp_rcv+0x271/0x450 [<ffffffff816a4ca7>] ip_local_deliver_finish+0x127/0x3a0 [<ffffffff816a4bc1>] ? ip_local_deliver_finish+0x41/0x3a0 [<ffffffff816a5160>] ip_local_deliver+0x60/0xd0 [<ffffffff816a4b80>] ? ip_rcv_finish+0x560/0x560 [<ffffffff816a46fd>] ip_rcv_finish+0xdd/0x560 [<ffffffff816a5453>] ip_rcv+0x283/0x3e0 [<ffffffff810b6302>] ? match_held_lock+0x192/0x200 [<ffffffff816a4620>] ? inet_del_offload+0x40/0x40 [<ffffffff8165d062>] __netif_receive_skb_core+0x392/0xae0 [<ffffffff8165e68e>] ? process_backlog+0x8e/0x230 [<ffffffff810b53f1>] ? mark_held_locks+0x71/0x90 [<ffffffff8165d7c8>] __netif_receive_skb+0x18/0x60 [<ffffffff8165e678>] process_backlog+0x78/0x230 [<ffffffff8165e6dd>] ? process_backlog+0xdd/0x230 [<ffffffff8165e355>] net_rx_action+0x155/0x400 [<ffffffff8106b48c>] __do_softirq+0xcc/0x420 [<ffffffff816a8e87>] ? ip_finish_output2+0x217/0x590 [<ffffffff8178e78c>] do_softirq_own_stack+0x1c/0x30 <EOI> [<ffffffff8106b88e>] do_softirq+0x4e/0x60 [<ffffffff8106b948>] __local_bh_enable_ip+0xa8/0xb0 [<ffffffff816a8eb0>] ip_finish_output2+0x240/0x590 [<ffffffff816a9a31>] ? ip_do_fragment+0x831/0x8a0 [<ffffffff816a9a31>] ip_do_fragment+0x831/0x8a0 [<ffffffff816a8c70>] ? ip_copy_metadata+0x1b0/0x1b0 [<ffffffff816a9ae3>] ip_fragment.constprop.49+0x43/0x80 [<ffffffff816a9c9c>] ip_finish_output+0x17c/0x340 [<ffffffff8169a6f4>] ? nf_hook_slow+0xe4/0x190 [<ffffffff816ab4c0>] ip_output+0x70/0x110 [<ffffffff816a9b20>] ? ip_fragment.constprop.49+0x80/0x80 [<ffffffff816aa9f9>] ip_local_out+0x39/0x70 [<ffffffff816abf89>] ip_send_skb+0x19/0x40 [<ffffffff816abfe3>] ip_push_pending_frames+0x33/0x40 [<ffffffff816d55d3>] raw_sendmsg+0x7d3/0xc30 [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90 [<ffffffff816e7557>] ? inet_sendmsg+0xc7/0x1d0 [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70 [<ffffffff816e759a>] inet_sendmsg+0x10a/0x1d0 [<ffffffff816e7495>] ? inet_sendmsg+0x5/0x1d0 [<ffffffff8163e398>] sock_sendmsg+0x38/0x50 [<ffffffff8163ec5f>] ___sys_sendmsg+0x25f/0x270 [<ffffffff811aadad>] ? handle_mm_fault+0x8dd/0x1320 [<ffffffff8178c147>] ? _raw_spin_unlock+0x27/0x40 [<ffffffff810529b2>] ? __do_page_fault+0x1e2/0x460 [<ffffffff81204886>] ? __fget_light+0x66/0x90 [<ffffffff8163f8e2>] __sys_sendmsg+0x42/0x80 [<ffffffff8163f932>] SyS_sendmsg+0x12/0x20 [<ffffffff8178cb17>] entry_SYSCALL_64_fastpath+0x12/0x6f Code: 00 00 44 89 e0 e9 7c fb ff ff 4c 89 ff e8 e7 e7 ff ff 41 8b 9d 80 00 00 00 2b 5d d4 89 d8 c1 f8 03 0f b7 c0 e9 33 ff ff f 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 RIP [<ffffffff816a9a92>] ip_do_fragment+0x892/0x8a0 RSP <ffff88006d603170> Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action") Signed-off-by: Joe Stringer <joe@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28Merge branch 'sctp-transport-races'David S. Miller5-30/+24
Xin Long says: ==================== fix the transport dead race check by using atomic_add_unless on refcnt sctp: fix the transport dead race check by using atomic_add_unless on refcnt sctp: hold transport before we access t->asoc in sctp proc sctp: remove the dead field of sctp_transport ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28sctp: remove the dead field of sctp_transportXin Long4-21/+2
After we use refcnt to check if transport is alive, the dead can be removed from sctp_transport. The traversal of transport_addr_list in procfs dump is using list_for_each_entry_rcu, no need to check if it has been freed. sctp_generate_t3_rtx_event and sctp_generate_heartbeat_event is protected by sock lock, it's not necessary to check dead, either. also, the timers are cancelled when sctp_transport_free() is called, that it doesn't wait for refcnt to reach 0 to cancel them. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28sctp: hold transport before we access t->asoc in sctp procXin Long1-0/+8
Previously, before rhashtable, /proc assoc listing was done by read-locking the entire hash entry and dumping all assocs at once, so we were sure that the assoc wasn't freed because it wouldn't be possible to remove it from the hash meanwhile. Now we use rhashtable to list transports, and dump entries one by one. That is, now we have to check if the assoc is still a good one, as the transport we got may be being freed. Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28sctp: fix the transport dead race check by using atomic_add_unless on refcntXin Long3-9/+14
Now when __sctp_lookup_association is running in BH, it will try to check if t->dead is set, but meanwhile other CPUs may be freeing this transport and this assoc and if it happens that __sctp_lookup_association checked t->dead a bit too early, it may think that the association is still good while it was already freed. So we fix this race by using atomic_add_unless in sctp_transport_hold. After we get one transport from hashtable, we will hold it only when this transport's refcnt is not 0, so that we can make sure t->asoc cannot be freed before we hold the asoc again. Note that sctp association is not freed using RCU so we can't use atomic_add_unless() with it as it may just be too late for that either. Fixes: 4f0087812648 ("sctp: apply rhashtable api to send/recv path") Reported-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28Merge branch 'mlxsw-fixes'David S. Miller4-40/+293
Jiri Pirko says: ==================== mlxsw: driver fixes Couple of various mlxsw driver fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: reg: Use correct offset in field definitonIdo Schimmel1-3/+3
The rx_lane, tx_lane and module fields in the PMLP register don't have an additional offset besides the base one (0x04), so set it to 0x00. Fixes: 4ec14b7634b2 ("mlxsw: Add interface to access registers and process events") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Compare local ports instead of pointersIdo Schimmel1-2/+4
When dumping the FDB we can't compare the actual pointers of the ports structs, as it's possible the struct represents a vPort instead of the underlying physical port. Solve this by comparing the local port number instead, as it's shared between the physical ports and all the vPorts on top of him. Fixes: 54a732018d8e ("mlxsw: spectrum: Adjust switchdev ops for VLAN devices") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Dump LAG FDB records only onceIdo Schimmel1-2/+10
LAG FDB records can only point to LAG devices or VLAN devices configured on top of them. Therefore, when dumping the FDB we shouldn't associate these records with the underlying physical ports. Fixes: 8a1ab5d76639 ("mlxsw: spectrum: Implement FDB add/remove/dump for LAG") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Use correct netdev when notifying bridgeIdo Schimmel1-2/+4
LAG FDB entries pointing to VLAN devices should be reported to the bridge with the matching VLAN device and not the underlying LAG device. Fixes: aac78a440887 ("mlxsw: spectrum: Adjust FDB notifications for VLAN devices") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Don't report VLAN for 802.1D FDB entriesIdo Schimmel1-15/+16
When dumping the hardware FDB we should report entries pointing to VLAN devices with VLAN 0, as packets coming into the bridge are untagged. Likewise, pass FDB_{ADD,DEL} notifications with VLAN 0 for these devices. Fixes: 54a732018d8e ("mlxsw: spectrum: Adjust switchdev ops for VLAN devices") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Notify bridge's FDB only based on learning_syncIdo Schimmel1-8/+6
When we disable learning on bridge port we should still update the software bridge's FDB when entry pointing to this bridge port is aged-out. We can otherwise have an inconsistency between software and hardware tables. Fixes: 8a1ab5d76639 ("mlxsw: spectrum: Implement FDB add/remove/dump for LAG") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Disable learning according to STP stateIdo Schimmel1-1/+1
When port is put into LISTENING state it shouldn't populate the FDB, so set the port's STP state in hardware to DISCARDING instead of LEARNING. It will therefore keep listening to BPDU packets, but discard other non-control packets and won't perform any learning. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Don't forward packets when STP state is DISABLEDIdo Schimmel1-1/+1
When STP state is set to DISABLED the port is assumed to be inactive, but currently we forward packets ingressing through it. Instead, set the port's STP state in hardware to DISCARDING, which means it doesn't forward packets or perform any learning, but it does trap control packets. However, these packets will be dropped by bridge code, which results in the expected behavior. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Flush FDB when leaving bridgeIdo Schimmel1-8/+129
As explained in previous commit, we should always take care of flushing the FDB in the driver and not rely on bridge code. We need to distinguish between two cases with regards to LAG: 1) Port is leaving LAG while LAG is bridged (or VLAN devices on top of it). In this case don't flush the FDB entries pointing to the LAG ID, as this will affect other ports still member in the LAG. Only flush the FDB when the last port in the LAG is leaving the bridge. 2) LAG device is leaving the bridge. In this case the CHANGEUPPER event is simply propagated to each member port, so make each port flush the FDB in its turn. Note that emptying a bridged LAG from ports creates an inconsistency between hardware and software. A user who later (< ageing_time) re-populates the LAG won't have any FDB entries pointing to the LAG ID in hardware, but they will be present in the software bridge's FDB. Currently there is no good solution to this problem, but this will be addressed by us in the future. In order to optimize the flushing process, flush by port or LAG ID if there are no VLAN interfaces on top of the port. Otherwise, flush using (Port / LAG ID, FID=VID} for each of the lower 4K FIDs. In the case of VLAN device simply flush using {Port / LAG ID, vFID} with the vFID to which the VLAN device is mapped to. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: reg: Add the Switch Filtering DB Flush registerIdo Schimmel1-0/+88
When removing a net device from a bridge we should flush the FDB entries associated with this net device. Up until now, we relied upon bridge code to do that for us, but it is possible for user to prevent hardware from syncing with the software bridge (learning_sync=0), so we need to flush overselves. Add the Switch Filtering DB Flush (SFDF) register that is used to flush FDB entries according to different parameters (per-port, per-FID etc). Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Handle port leaving LAG while bridgedIdo Schimmel3-3/+36
It is possible for a user to remove a port from a LAG device, while the LAG device or VLAN devices on top of it are bridged. In these cases, bridge's teardown sequence is never issued, so we need to take care of it ourselves. When LAG's unlinking event is received by port netdev: 1) Traverse its vPorts list and make those member in a bridge leave it. They will be deleted later by LAG code. 2) Make the port netdev itself leave its bridge if member in one. Fixes: 0d65fc13042f ("mlxsw: spectrum: Implement LAG port join/leave") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25Merge branch 'master' of ↵David S. Miller2-12/+7
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2016-01-25 This series contains updates to i40e only and so I won't continue receiving patches to fix the same issue (again). Arnd fixes the driver from causing the compiler whining about uninitialized variables, so initialize those variables. Eric fixes the build errors/warnings which were introduced by Anjali when she added geneve support to i40e. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25net: i40e: shut up uninitialized variable warningsArnd Bergmann1-2/+2
intel/i40e/i40e_txrx.c: In function 'i40e_xmit_frame_ring': intel/i40e/i40e_txrx.c:2367:20: error: 'oiph' may be used uninitialized in this function [-Werror=maybe-uninitialized] intel/i40e/i40e_txrx.c:2317:16: note: 'oiph' was declared here intel/i40e/i40e_txrx.c:2367:17: error: 'oudph' may be used uninitialized in this function [-Werror=maybe-uninitialized] intel/i40e/i40e_txrx.c:2316:17: note: 'oudph' was declared here Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-25i40e: fix build warningsEric Dumazet1-10/+5
Fixes following build warnings : drivers/net/ethernet/intel/i40e/i40e_main.c:7057:13: warning: 'i40e_sync_udp_filters_subtask' defined but not used [-Wunused-function] drivers/net/ethernet/intel/i40e/i40e_main.c:8524:13: warning: 'i40e_add_vxlan_port' defined but not used [-Wunused-function] drivers/net/ethernet/intel/i40e/i40e_main.c:8569:13: warning: 'i40e_del_vxlan_port' defined but not used [-Wunused-function] drivers/net/ethernet/intel/i40e/i40e_main.c:8604:13: warning: 'i40e_add_geneve_port' defined but not used [-Wunused-function] drivers/net/ethernet/intel/i40e/i40e_main.c:8651:13: warning: 'i40e_del_geneve_port' defined but not used [-Wunused-function] Fixes: 6a899024058d ("i40e: geneve tunnel offload support") Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-25hv_netvsc: Fix book keeping of skb during batching processHaiyang Zhang2-11/+23
Since eliminating send_completion_tid from struct hv_netvsc_packet, we haven't add proper book keeping for the skb of the batched packet. This patch fixes this issue and allows the previous skb is properly freed. Otherwise, a panic may happen. Thanks to Simon Xiao <sixiao@microsoft.com> for bisecting and analysis. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25hv_netvsc: use skb_get_hash() instead of a homegrown implementationVitaly Kuznetsov1-64/+3
Recent changes to 'struct flow_keys' (e.g commit d34af823ff40 ("net: Add VLAN ID to flow_keys")) introduced a performance regression in netvsc driver. Is problem is, however, not the above mentioned commit but the fact that netvsc_set_hash() function did some assumptions on the struct flow_keys data layout and this is wrong. Get rid of netvsc_set_hash() by switching to skb_get_hash(). This change will also imply switching to Jenkins hash from the currently used Toeplitz but it seems there is no good excuse for Toeplitz to stay. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25sit: set rtnl_link_ops before calling register_netdeviceThadeu Lima de Souza Cascardo1-2/+2
When creating a SIT tunnel with ip tunnel, rtnl_link_ops is not set before ipip6_tunnel_create is called. When register_netdevice is called, there is no linkinfo attribute in the NEWLINK message because of that. Setting rtnl_link_ops before calling register_netdevice fixes that. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25net: fec: use CONFIG_ARM instead of CONFIG_ARCH_MXC/SOC_IMX28Johannes Berg2-7/+4
As Arnd Bergmann points out, using CONFIG_ARCH_MXC and/or SOC_IMX28 is wrong if some other ARM platform uses this device - the operation of the driver would depend on an unrelated ARM platform that might or might not be set for multi-platform kernels. Prior to my previous patch, any other platforms using it would have been broken already due to having the cbd_datlen/cbd_sc fields in the wrong order, but byte ordering correctly, so no such platforms can exist and work today. In any case, it seems likely that only Freescale SoCs use this part, and those are little-endian on ARM, so CONFIG_ARM is safe for them. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25defxx: fix build warningSudip Mukherjee1-4/+4
We are getting many build warnings about: 'bar_start' may be used uninitialized and 'bar_len' may be used uninitialized They are not actually uninitialized as dfx_get_bars() will initialize them properly. But still lets have them initialized just to satisfy the compiler (gcc 4.8.2). Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Acked-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25net: macb: fix build warningSudip Mukherjee1-1/+1
We are getting build warning about: macb.c:2889:13: warning: 'tx_clk' may be used uninitialized in this function macb.c:2888:11: warning: 'hclk' may be used uninitialized in this function In reality they are not used uninitialized as clk_init() will initialize them, this patch will just silence the warning. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25net: fec: make driver endian-safeJohannes Berg3-72/+101
The driver treats the device descriptors as CPU-endian, which appears to be correct with the default endianness on both ARM (typically LE) and PowerPC (typically BE) SoCs, indicating that the hardware block is generated differently. Add endianness annotations and byteswaps as necessary. It's not clear that the ifdef there really is correct and shouldn't just be #ifdef CONFIG_ARM, but I also can't test on anything but the i.MX6 HummingBoard where this gets it working with a BE kernel. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25net: dsa: fix mv88e6xxx switchesRussell King1-1/+1
Since commit 76e398a62712 ("net: dsa: use switchdev obj for VLAN add/del ops"), the Marvell 88E6xxx switch has been unable to pass traffic between ports - any received traffic is discarded by the switch. Taking a port out of bridge mode and configuring a vlan on it also the port to start passing traffic. With the debugfs files re-instated to allow debug of this issue by comparing the register settings between the working and non-working case, the reason becomes clear: GLOBAL GLOBAL2 SERDES 0 1 2 3 4 5 6 - 7: 1111 707f 2001 2 2 2 2 2 0 2 + 7: 1111 707f 2001 1 1 1 1 1 0 1 Register 7 for the ports is the default vlan tag register, and in the non-working setup, it has been set to 2, despite vlan 2 not being configured. This causes the switch to drop all packets coming in to these ports. The working setup has the default vlan tag register set to 1, which is the default vlan when none is configured. Inspection of the code reveals why. The code prior to this commit was: - for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { ... - if (!err && vlan->flags & BRIDGE_VLAN_INFO_PVID) - err = ds->drv->port_pvid_set(ds, p->port, vid); but the new code is: + for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { ... + } ... + if (pvid) + err = _mv88e6xxx_port_pvid_set(ds, port, vid); This causes the new code to always set the default vlan to one higher than the old code. Fix this. Fixes: 76e398a62712 ("net: dsa: use switchdev obj for VLAN add/del ops") Cc: <stable@vger.kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-2582xx: FCC: Fixing a bug causing to FCC port lock-up (second try)Martin Roth1-1/+1
This is an additional patch to the one already submitted recently. The previous patch was not complete, and the FCC port lock-up scenario has been reproduced in lab. I had an opportunity to check the current patch in lab and the FCC port lock no longer freezes, while the previous patch still locks-up the FCC port. The current patch fixes a pointer arithmetic bug (second bug in the same line), which leads FCC port lock-up during underrun/collision handling. Within the tx_startup() function in mac-fcc.c, the address of last BD is not calculated correctly. As a result of wrong calculation of the last BD address, the next transmitted BD may be set to an area out of the transmit BD ring. This actually causes to port lock-up and it is not recoverable. Signed-off-by: Martin Roth <martin.roth@motorolasolutions.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25ipv4+ipv6: Make INET*_ESP select CRYPTO_ECHAINIVThomas Egerer2-0/+2
The ESP algorithms using CBC mode require echainiv. Hence INET*_ESP have to select CRYPTO_ECHAINIV in order to work properly. This solves the issues caused by a misconfiguration as described in [1]. The original approach, patching crypto/Kconfig was turned down by Herbert Xu [2]. [1] https://lists.strongswan.org/pipermail/users/2015-December/009074.html [2] http://marc.info/?l=linux-crypto-vger&m=145224655809562&w=2 Signed-off-by: Thomas Egerer <hakke_007@gmx.de> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-24sctp: allow setting SCTP_SACK_IMMEDIATELY by the applicationMarcelo Ricardo Leitner1-0/+2
This patch extends commit b93d6471748d ("sctp: implement the sender side for SACK-IMMEDIATELY extension") as it didn't white list SCTP_SACK_IMMEDIATELY on sctp_msghdr_parse(), causing it to be understood as an invalid flag and returning -EINVAL to the application. Note that the actual handling of the flag is already there in sctp_datamsg_from_user(). https://tools.ietf.org/html/rfc7053#section-7 Fixes: b93d6471748d ("sctp: implement the sender side for SACK-IMMEDIATELY extension") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-24net: simplify napi_synchronize() to avoid warningsArnd Bergmann1-6/+5
The napi_synchronize() function is defined twice: The definition for SMP builds waits for other CPUs to be done, while the uniprocessor variant just contains a barrier and ignores its argument. In the mvneta driver, this leads to a warning about an unused variable when we lookup the NAPI struct of another CPU and then don't use it: ethernet/marvell/mvneta.c: In function 'mvneta_percpu_notifier': ethernet/marvell/mvneta.c:2910:30: error: unused variable 'other_port' [-Werror=unused-variable] There are no other CPUs on a UP build, so that code never runs, but gcc does not know this. The nicest solution seems to be to turn the napi_synchronize() helper into an inline function for the UP case as well, as that leads gcc to not complain about the argument being unused. Once we do that, we can also combine the two cases into a single function definition and use if(IS_ENABLED()) rather than #ifdef to make it look a bit nicer. The warning first came up in linux-4.4, but I failed to catch it earlier. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: f86428854480 ("net: mvneta: Statically assign queues to CPUs") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-24pptp: fix illegal memory access caused by multiple bind()sHannes Frederic Sowa1-10/+24
Several times already this has been reported as kasan reports caused by syzkaller and trinity and people always looked at RCU races, but it is much more simple. :) In case we bind a pptp socket multiple times, we simply add it to the callid_sock list but don't remove the old binding. Thus the old socket stays in the bucket with unused call_id indexes and doesn't get cleaned up. This causes various forms of kasan reports which were hard to pinpoint. Simply don't allow multiple binds and correct error handling in pptp_bind. Also keep sk_state bits in place in pptp_connect. Fixes: 00959ade36acad ("PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)") Cc: Dmitry Kozlov <xeb@mail.ru> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Dave Jones <davej@codemonkey.org.uk> Reported-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-24drivers: net: xgene: fix extra IRQ issueIyappan Subramanian2-3/+10
For interrupt controller that doesn't support irq_disable and hardware with level interrupt, an extra interrupt may be pending. This patch fixes the issue by setting IRQ_DISABLE_UNLAZY flag for the interrupt line, as suggested by, 'commit e9849777d0e2 ("genirq: Add flag to force mask in disable_irq[_nosync]()")' Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Toan Le <toanle@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-24af_unix: fix struct pid memory leakEric Dumazet1-0/+1
Dmitry reported a struct pid leak detected by a syzkaller program. Bug happens in unix_stream_recvmsg() when we break the loop when a signal is pending, without properly releasing scm. Fixes: b3ca9b02b007 ("net: fix multithreaded signal handling in unix recv routines") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Rainer Weikusat <rweikusat@mobileactivedefense.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21net: sock: remove dead cgroup methods from struct protoJohannes Weiner1-12/+0
The cgroup methods are no longer used after baac50bbc3cd ("net: tcp_memcontrol: simplify linkage between socket and page counter"). The hunk to delete them was included in the original patch but must have gotten lost during conflict resolution on the way upstream. Fixes: baac50bbc3cd ("net: tcp_memcontrol: simplify linkage between socket and page counter") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21net: phy: smsc: Fix disabling energy detect modeTeresa Remmet1-10/+44
When the lan87xx_read_status function is getting called the energy detect mode is enabled again even if it has been disabled by device tree. Added private struct to check the energy detect status. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21Merge branch 'mvneta-multi-clk'David S. Miller2-15/+30
Jisheng Zhang says: ==================== net: mvneta: support more than one clk Some platforms may provide more than one clk for the mvneta IP, for example Marvell BG4CT provides "core" clk for the mac core, and "axi" clk for the AXI bus logic. This series tries to addess the "more than one clk" issue. Note: to support BG4CT, we have lots of refactor work to do, eg. BG4CT doesn't have mbus concept etc. Since v2: - Name the optional clock as "bus", which is a bit more flexible. Since v1: - Add Thomas Acks to patch1 and patch2. - make sure the headers are really sorted (some headers are still unsorted in v1). - disable axi clk before disabling core clk, Thank Thomas. - update dt binding as Thomas suggested. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21net: mvneta: update clocks property and document additional clock-namesJisheng Zhang1-1/+6
Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21net: mvneta: get optional bus clkJisheng Zhang1-0/+8
Some platforms may provide more than one clk for the mvneta IP, for example Marvell BG4CT provides one clk for the mac core, and one clk for the AXI bus logic. Obviously this bus clk also need to be enabled. This patch adds this optional "bus" clk support. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21net: mvneta: Try to get named core clock firstJisheng Zhang1-1/+3
Some platforms may provide more than one clk for the mvneta IP, for example Marvell BG4CT provides one clk for the mac core, and one clk for the AXI bus logic. To support for more than one clock, we'll need to distinguish between the clock by name. Change clock probing to first try to get "core" clock before falling back to unnamed clock. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21net: mvneta: sort the headers in alphabetic orderJisheng Zhang1-13/+13
Sorting the headers in alphabetic order will help to reduce the conflict when adding new headers in the future. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21net: mvneta: fix trivial cut-off issue in mvneta_ethtool_update_statsJisheng Zhang1-5/+4
When s->type is T_REG_64, the high 32bits are lost in val. This patch fixes this trivial issue. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Fixes: 9b0cdefa4cd5 ("net: mvneta: add ethtool statistics") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21net: hns: enet specifies a reference to dsafyankejian10-45/+42
This patch replace the assoication between dsaf and enet from string matching to object reference. It requires the DTS to be updated within BIOS. Thanks god it can be done for all released boards. Signed-off-by: Kejian Yan <yankejian@huawei.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21tcp: fix NULL deref in tcp_v4_send_ack()Eric Dumazet1-5/+8
Neal reported crashes with this stack trace : RIP: 0010:[<ffffffff8c57231b>] tcp_v4_send_ack+0x41/0x20f ... CR2: 0000000000000018 CR3: 000000044005c000 CR4: 00000000001427e0 ... [<ffffffff8c57258e>] tcp_v4_reqsk_send_ack+0xa5/0xb4 [<ffffffff8c1a7caa>] tcp_check_req+0x2ea/0x3e0 [<ffffffff8c19e420>] tcp_rcv_state_process+0x850/0x2500 [<ffffffff8c1a6d21>] tcp_v4_do_rcv+0x141/0x330 [<ffffffff8c56cdb2>] sk_backlog_rcv+0x21/0x30 [<ffffffff8c098bbd>] tcp_recvmsg+0x75d/0xf90 [<ffffffff8c0a8700>] inet_recvmsg+0x80/0xa0 [<ffffffff8c17623e>] sock_aio_read+0xee/0x110 [<ffffffff8c066fcf>] do_sync_read+0x6f/0xa0 [<ffffffff8c0673a1>] SyS_read+0x1e1/0x290 [<ffffffff8c5ca262>] system_call_fastpath+0x16/0x1b The problem here is the skb we provide to tcp_v4_send_ack() had to be parked in the backlog of a new TCP fastopen child because this child was owned by the user at the time an out of window packet arrived. Before queuing a packet, TCP has to set skb->dev to NULL as the device could disappear before packet is removed from the queue. Fix this issue by using the net pointer provided by the socket (being a timewait or a request socket). IPv6 is immune to the bug : tcp_v6_send_response() already gets the net pointer from the socket if provided. Fixes: 168a8f58059a ("tcp: TCP Fast Open Server - main code path") Reported-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jerry Chu <hkchu@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21tunnels: Allow IPv6 UDP checksums to be correctly controlled.Jesse Gross2-9/+18
When configuring checksums on UDP tunnels, the flags are different for IPv4 vs. IPv6 (and reversed). However, when lightweight tunnels are enabled the flags used are always the IPv4 versions, which are ignored in the IPv6 code paths. This uses the correct IPv6 flags, so checksums can be controlled appropriately. Fixes: a725e514 ("vxlan: metadata based tunneling for IPv6") Fixes: abe492b4 ("geneve: UDP checksum configuration via netlink") Signed-off-by: Jesse Gross <jesse@kernel.org> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21Merge branch 'fix-phy-ignore-interrupts'David S. Miller2-19/+29
Florian Fainelli says: ==================== net: phy: Finally fix PHY_IGNORE_INTERRUPTS This patch series finally fixes how PHY_IGNORE_INTERRUPTS are treated by avoiding to poll the PHY *and* getting notified from link state changes by the Ethernet MAC interrupt service routine. Tested with bcmgenet since this is the HW that I have access to. Targetting the "net" tree since these are bugfixes, but I would like Woojun and Andrew to take a look and test that on their respective HW setups as well. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21net: bcmgenet: Properly configure PHY to ignore interruptFlorian Fainelli1-1/+1
By the time we execute bcmgenet_mii_probe(), the MDIO bus structure has long been allocated and registered. Overirring the PHY interrupt using the MDIO bus structure has no chance to work anymore, because of_mdiobus_register() has call phy_device_create() for use, which copied the MDIO bus address's irq for the PHY into the PHY device "irq" member. Since we do have a proper reference to a PHY device in bcmgenet_mii_probe(), just assign the desired IRQ value here. Fixes: aa09677cba42 ("net: bcmgenet: add MDIO routines") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21net: phy: Fix phy_mac_interrupt()Florian Fainelli1-13/+18
Commit 5ea94e7686a3 ("phy: add phy_mac_interrupt()") to use with PHY_IGNORE_INTERRUPT added a cancel_work_sync() into phy_mac_interrupt() which is allowed to sleep, whereas phy_mac_interrupt() is expected to be callable from interrupt context. Now that we have fixed how the PHY state machine treats PHY_IGNORE_INTERRUPT with respect to state changes, we can just set the new link state, and queue the PHY state machine for execution so it is going to read the new link state. For that to work properly, we need to update phy_change() not to try to invoke any interrupt callbacks if we have configured the PHY device for PHY_IGNORE_INTERRUPT, because that PHY device and its driver are not required to implement those. Fixes: 5ea94e7686a3 ("phy: add phy_mac_interrupt() to use with PHY_IGNORE_INTERRUPT") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 17:22:08 +0000