Age | Commit message (Collapse) | Author | Files | Lines |
|
Frequency can be adjusted in DT it make sense to
print current used value on driver init.
Signed-off-by: Max Uvarov <muvarov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Polling 14 mdio devices on single mdio bus eats 30% of 1Ghz cpu time
due to busy loop in wait(). Add small delay to relax cpu.
Signed-off-by: Max Uvarov <muvarov@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Stephen Hemminger says:
====================
netvsc: minor fixes and improvements
These are non-critical bug fixes, related to functionality now in net-next.
1. delaying the automatic bring up of VF device to allow udev to change name.
2. performance improvement
3. handle MAC address change with VF; mostly propogate the error that VF gives.
4. minor cleanups
5. allow setting send/receive buffer size with ethtool.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add ethtool statistics for case where send chimmeny buffer is
exhausted and driver has to fall back to doing scatter/gather
send. Also, add statistic for case where ring buffer is full and
receive completions are delayed.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Control the size of the buffer areas via ethtool ring settings.
They aren't really traditional hardware rings, but host API breaks
receive and send buffer into chunks. The final size of the chunks are
controlled by the host.
The default value of send and receive buffer area for host DMA
is much larger than it needs to be. Experimentation shows that
4M receive and 1M send is sufficient.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function init_page_array is always called with a valid pointer
to RNDIS header. No check for NULL is needed.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Assignment to a typed pointer is sufficient in C.
No cast is needed.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix some minor indentation issues.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The send and receive buffers are both per-device (not per-channel).
The associated NUMA node is a property of the CPU which is per-channel
therefore it makes no sense to force the receive/send buffer to be
allocated on a particular node (since it is a shared resource).
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If setting new values fails, and the attempt to restore original
settings fails. Then log an error and leave device down.
This should never happen, but if it does don't go down in flames.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If VF is slaved to synthetic device, then any change to netvsc
MAC address should be propagated to the slave device.
If slave device doesn't support MAC address change then it
should also be an error to attempt to change synthetic NIC MAC
address.
It also fixes the error unwind in the original code.
If give a bad address, the old code would change the device
MAC address anyway.
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When hv_pkt_iter_next() returns NULL, it has already called
hv_pkt_iter_close(). Calling it twice can lead to extra host signal.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When VF device is discovered, delay bring it automatically up in
order to allow userspace to some simple changes (like renaming).
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
"ret" isn't necessarily initialized here.
Fixes: 9525ae83959b ("phylink: add phylink infrastructure")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no restriction on queue size alignment. Hence removing check for
valid queue size.
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When deleting a queue, clear its corresponding bit in the qmask, vfree its
memory, clear out the pointer that's pointing to it, and decrement the
queue count.
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <fmanlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jiri Pirko says:
====================
net: sched: let the offloader decide what to offload
Currently there is a Qdisc_class_ops->tcf_cl_offload callback
that is called to find out if cls would offload rule or not.
This is only supported by sch_ingress and sch_clsact.
So the Qdisc are to decide. However, the driver knows what is he
able to offload, so move the decision making to drivers completely.
Just pass classid there and provide set of helpers to allow
identification of qdisc.
As a side effect, this actually allows clsact egress rules
offload in mlxsw.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
cops->tcf_cl_offload is no longer needed, as the drivers check what they
can and cannot offload using the classid identify helpers. So remove this.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no longer need to use handle in drivers, so remove it from
tc_cls_common_offload struct.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of checking handle, which does not have the inner class
information and drivers wrongly assume clsact->egress as ingress, use
the newly introduced classid identification helpers.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Drivers need classid to decide they support this specific qdisc+class
or not. So propagate it down via the tc_cls_common_offload struct.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Offloading drivers need to understand what qdisc class a filter is added
to. Currently they only need to identify ingress, clsact->ingress and
clsact->egress. So provide these helpers.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add extack error messages for failure paths while creating/modifying
geneve devices. Once extack support is added to iproute2, more
meaningful and helpful error messages will be displayed making it easy
for users to discern what went wrong.
Before:
=======
$ ip link add gen1 address 0:1:2:3:4:5:6 type geneve id 200 \
remote 192.168.13.2
RTNETLINK answers: Invalid argument
After:
======
$ ip link add gen1 address 0:1:2:3:4:5:6 type geneve id 200 \
remote 192.168.13.2
Error: Provided link layer address is not Ethernet
Also, netdev_dbg() calls used to log errors associated with Netlink
request have been removed.
Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Xin Long says:
====================
sctp: remove typedefs from structures part 6
As we know, typedef is suggested not to use in kernel, even checkpatch.pl
also gives warnings about it. Now sctp is using it for many structures.
All this kind of typedef's using should be removed. This patchset is the
part 6 to remove all typedefs in include/net/sctp/structs.h, command.h
and sm.h.
Just as the part 1-5, No any code's logic would be changed in these patches,
only cleaning up.
Note that this is the last part for this typedef cleaning up. after this
patchset, no more inappropriate typedefs in sctp. It's also to tidy some
codes when removing them, like fixing many indents, reodering some local
params, especially in the last 2 patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are some bad indents of functions' defination in sm_make_chunk.c.
They have been there since beginning, it was probably caused by that
the typedef sctp_chunk_t was replaced with struct sctp_chunk.
So it's the best time to fix them in this patchset, it's also to fix
some bad indents in other functions' defination in sm_make_chunk.c.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is to remove the typedef sctp_disposition_t, and
replace with enum sctp_disposition in the places where it's
using this typedef.
It's also to fix the indent for many functions' defination.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is to remove the typedef sctp_sm_table_entry_t, and
replace with struct sctp_sm_table_entry in the places where it's
using this typedef.
It is also to fix some indents.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove this typedef including the struct, there is even no places
using it.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is to remove the typedef sctp_verb_t, and
replace with enum sctp_verb in the places where it's
using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is to remove the typedef sctp_arg_t, and
replace with union sctp_arg in the places where it's
using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is to remove the typedef sctp_cmd_seq_t, and
replace with struct sctp_cmd_seq in the places where it's
using this typedef.
Note that it doesn't fix many indents although it should,
as sctp_disposition_t's removal would mess them up again.
So better to fix them when removing sctp_disposition_t in
the later patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is to remove the typedef sctp_cmd_t, and
replace with enum sctp_cmd in the places where it's
using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is to remove the typedef sctp_socket_type_t, and
replace with enum sctp_socket_type in the places where it's
using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is to remove the typedef sctp_dbg_objcnt_entry_t, and
replace with struct sctp_dbg_objcnt_entry in the places where it's
using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is to remove the typedef sctp_cmsgs_t, and
replace with struct sctp_cmsgs in the places where it's
using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is to remove the typedef sctp_endpoint_type_t, and
replace with enum sctp_endpoint_type in the places where it's
using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is to remove the typedef sctp_sender_hb_info_t, and
replace with struct sctp_sender_hb_info in the places where it's
using this typedef.
It is also to use sizeof(variable) instead of sizeof(type).
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove this function typedef, there is even no places
using it.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Mainline had UFO fixes, but UFO is removed in net-next so we
take the HEAD hunks.
Minor context conflict in bcmsysport statistics bug fix.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Fix handling of initial STATE message in TIPC, from Jon Paul Maloy.
2) Fix stats handling in bcm_sysport_get_stats(), from Florian
Fainelli.
3) Reject 16777215 VNI value in geneve_validate(), from Girish
Moodalbail.
4) Fix initial IGMP sysctl setting regression, from Nikolay Borisov.
5) Once a UFO fragmented frame is treated as UFO, we should continue
doing so. Likewise once a frame has been segmented, we should
continue doing that and not try to convert it to a UFO frame. From
Willem de Bruijn.
6) Test the AF_PACKET RX/TX ring pg_vec state under the socket lock to
prevent races. From Willem de Bruijn.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
packet: fix tp_reserve race in packet_set_ring
udp: consistently apply ufo or fragmentation
net: sched: set xt_tgchk_param par.nft_compat as 0 in ipt_init_target
igmp: Fix regression caused by igmp sysctl namespace code.
geneve: maximum value of VNI cannot be used
net: systemport: Fix software statistics for SYSTEMPORT Lite
tipc: remove premature ESTABLISH FSM event at link synchronization
|
|
Updates to tp_reserve can race with reads of the field in
packet_set_ring. Avoid this by holding the socket lock during
updates in setsockopt PACKET_RESERVE.
This bug was discovered by syzkaller.
Fixes: 8913336a7e8d ("packet: add PACKET_RESERVE sockopt")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When iteratively building a UDP datagram with MSG_MORE and that
datagram exceeds MTU, consistently choose UFO or fragmentation.
Once skb_is_gso, always apply ufo. Conversely, once a datagram is
split across multiple skbs, do not consider ufo.
Sendpage already maintains the first invariant, only add the second.
IPv6 does not have a sendpage implementation to modify.
A gso skb must have a partial checksum, do not follow sk_no_check_tx
in udp_send_skb.
Found by syzkaller.
Fixes: e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Florian Westphal says:
====================
rtnetlink: fix initial rtnl pushdown fallout
This series fixes various bugs and splats reported since the
allow-handler-to-run-with-no-rtnl series went in.
Last patch adds a script that can be used to add further
tests in case more bugs are reported.
In case you prefer reverting the original series instead of
fixing fallout I can resend this patch on its own.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
add a simple script to exercise some rtnetlink call paths, so KASAN,
lockdep etc. can yell at developer before patches are sent upstream.
This can be extended to also cover bond, team, vrf and the like.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need to use PF_UNSPEC in case the requested family has no doit
callback, otherwise this now fails with EOPNOTSUPP instead of running the
unspec doit callback, as before.
Fixes: 6853dd488119 ("rtnetlink: protect handler table with rcu")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If using CONFIG_REFCOUNT_FULL=y we get following splat:
refcount_t: increment on 0; use-after-free.
WARNING: CPU: 0 PID: 304 at lib/refcount.c:152 refcount_inc+0x47/0x50
Call Trace:
rtnetlink_rcv_msg+0x191/0x260
...
This warning is harmless (0 is "no callback running", not "memory
was freed").
Use '1' as the new 'no handler is running' base instead of 0 to avoid
this.
Fixes: 019a316992ee ("rtnetlink: add reference counting to prevent module unload while dump is in progress")
Reported-by: Sabrina Dubroca <sdubroca@redhat.com>
Reported-by: kernel test robot <fengguang.wu@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
David Ahern reports following splat:
RTNL: assertion failed at net/core/dev.c (5717)
netdev_master_upper_dev_get+0x5f/0x70
if_nlmsg_size+0x158/0x240
rtnl_calcit.isra.26+0xa3/0xf0
rtnl_link_get_slave_info_data_size currently assumes RTNL protection, but
there appears to be no hard requirement for this, so use rcu instead.
At the time of this writing, there are three 'get_slave_size' callbacks
(now invoked under rcu): bond_get_slave_size, vrf_get_slave_size and
br_port_get_slave_size, all return constant only (i.e. they don't sleep).
Fixes: 6853dd488119 ("rtnetlink: protect handler table with rcu")
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Userspace sends RTM_GETLINK type, but the kernel substracts
RTM_BASE from this, i.e. 'type' doesn't contain RTM_GETLINK
anymore but instead RTM_GETLINK - RTM_BASE.
This caused the calcit callback to not be invoked when it
should have been (and vice versa).
While at it, also fix a off-by one when checking family index. vs
handler array size.
Fixes: e1fa6d216dd ("rtnetlink: call rtnl_calcit directly")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ido reports a rcu splat in __rtnl_register.
The splat is correct; as rtnl_register doesn't grab any logs
and doesn't use rcu locks either. It has always been like this.
handler families are not registered in parallel so there are no
races wrt. the kmalloc ordering.
The only reason to use rcu_dereference in the first place was to
avoid sparse from complaining about this.
Thus this switches to _raw() to not have rcu checks here.
The alternative is to add rtnl locking to register/unregister,
however, I don't see a compelling reason to do so as this has been
lockless for the past twenty years or so.
Fixes: 6853dd4881 ("rtnetlink: protect handler table with rcu")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull sparc updates from David Miller:
1) Recognize M8 cpus, just basic chip ID matching, from Allen Pais.
2) Prevent crashes when bringing up sunvdc virtual block devices in
some environments. From Jim Quigley.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sunvdc: prevent sunvdc panic when mpgroup disk added to guest domain
sparc64: Increase max_phys_bits to 51 and VA bits to 53 for M8.
sparc64: recognize and support sparc M8 cpu type
sparc64: properly name the cpu constants
|