summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2012-03-06ARM: kill off __mem_pciRob Herring16-72/+18
__mem_pci is only used to enable readl/writel and friends. Just condition this on readl being defined and remove all the __mem_pci defines. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Colin Cross <ccross@android.com> Cc: Olof Johansson <olof@lixom.net> Cc: Stephen Warren <swarren@nvidia.com>
2012-03-06ARM: remove bunch of now unused mach/io.h filesRob Herring42-997/+0
Now that many platforms don't need mach/io.h, remove the unused ones. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org>
2012-03-06ARM: make mach/io.h include optionalRob Herring2-0/+28
Add a kconfig option NEED_MACH_IO_H to conditionally include mach/io.h. Basing this on CONFIG_PCI and CONFIG_ISA doesn't quite work. Most ISA platforms don't need mach/io.h, but ebsa110 does. Most PCI platforms need mach/io.h for now, but ks8695 doesn't which means i/o accesses are broken. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Nicolas Pitre <nico@linaro.org>
2012-03-06ARM: clps711x: remove unneeded include of mach/io.hRob Herring1-1/+0
In preparation to remove mach/io.h, remove an unneeded include of it. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-03-06ARM: dove: add explicit include of dove.h to addr-map.cRob Herring1-0/+1
In preparation to remove mach/io.h, add explicit include of mach/dove.h Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Pitre <nico@linaro.org>
2012-03-06ARM: at91: add explicit include of hardware.h to uncompressorRob Herring1-0/+1
In preparation to remove mach/io.h, add explicit include of hardware.h. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-03-06ARM: ep93xx: clean-up mach/io.hRob Herring2-9/+9
Move ep93xx specifics in mach/io.h to ep93xx-regs.h. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com>
2012-03-06ARM: tegra: clean-up mach/io.hRob Herring4-49/+49
Move tegra specific mach/io.h parts into iomap.h. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Cc: Colin Cross <ccross@android.com> Cc: Olof Johansson <olof@lixom.net>
2012-03-06ARM: orion5x: clean-up mach/io.hRob Herring4-12/+11
Move orion5x specific mach/io.h parts into common.h. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Lennert Buytenhek <kernel@wantstofly.org> Acked-by: Nicolas Pitre <nico@linaro.org>
2012-03-06ARM: davinci: remove unneeded mach/io.h includeRob Herring1-1/+0
entry-macro.S doesn't actually need mach/io.h, so remove it. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2012-03-06[media] davinci: remove includes of mach/io.hRob Herring2-2/+0
Remove a few remaining includes of mach/io.h. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
2012-03-06ARM: OMAP: Remove remaining includes for mach/io.hTony Lindgren5-6/+0
These are no longer needed with the recent iomap.h changes. Reported-by: Rob Herring <robherring2@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-03-06ARM: msm: clean-up mach/io.hRob Herring5-7/+16
Move msm specifics in mach/io.h to respective msm_iomap-*.h headers. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org>
2012-03-06ARM: iop13xx: move io.h externs to pci.hRob Herring3-4/+8
These variables are just needed in pci.c and io.c, so move them out of io.h in preparation to remove io.h. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk>
2012-03-06ARM: remove compile time __arch_ioremap/__arch_iounmapRob Herring1-10/+5
Now that all custom ioremap/iounmap users are converted to runtime hook, remove the compile time defines. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Nicolas Pitre <nico@linaro.org>
2012-03-06ARM: ebsa110: use runtime ioremap hookRob Herring2-9/+15
Convert ebsa110 platforms to use run-time ioremap hook instead of the compile time hook. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk>
2012-03-06ARM: ixp4xx: use runtime ioremap hookRob Herring16-18/+54
Convert ixp4xx platforms to use run-time ioremap hook instead of the compile time hook. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Krzysztof Halasa <khc@pm.waw.pl>
2012-03-06ARM: iop13xx: use runtime ioremap hookRob Herring4-15/+12
Convert iop13xx platforms to use run-time ioremap hook instead of the compile time hook. The custom ioremap is still needed for 64-bit address handling. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk>
2012-03-06ARM: msm: use runtime ioremap hookRob Herring5-10/+21
Convert msm platforms to use run-time ioremap hook instead of the compile time hook. According to David Brown, only the msm7201 needed the ioremap hook. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Tested-by: David Brown <davidb@codeaurora.org> Acked-by: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org>
2012-03-06ARM: imx: convert to common runtime ioremap hookRob Herring3-22/+8
Convert i.MX platforms to use the common run-time ioremap hook instead of the imx specific hook. Also, move addr_in_module out of io.h. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Sascha Hauer <kernel@pengutronix.de>
2012-03-06ARM: provide runtime hook for ioremap/iounmapRob Herring2-4/+20
We have compile time over-ride of ioremap and iounmap, but an run-time override is needed for multi-platform builds. This adds an extra function pointer check, but ioremap is not peformance critical. The option for compile time selection remains. The caller variant is used here to provide correct caller information as ARM can only support level 0 for __builtin_return_address. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nicolas Pitre <nico@linaro.org>
2012-03-04usb: ohci-pxa27x: add explicit include of hardware.hRob Herring1-0/+1
ohci-pxa27x needs cpu_is_pxa3xx macro. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2012-03-04Merge remote-tracking branch 'arm-soc/at91/base2+cleanup' into cleanup-baseRob Herring88-3348/+2025
2012-02-29Merge branch 'cleanup' of ↵Arnd Bergmann99-280/+446
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into omap/cleanup * 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix L4_EMU_34XX_BASE error after iomap changes ARM: OMAP2+: Limit omap_read/write usage to legacy USB drivers ARM: OMAP: Remove plat/io.h by splitting it into mach/io.h and mach/hardware.h ARM: OMAP2+: Move most of plat/io.h into local iomap.h ARM: OMAP1: Move most of plat/io.h into local iomap.h ARM: OMAP1: Move 16xx GPIO system clock to platform init code ARM: OMAP: Move omap_init_consistent_dma_size() to local common.h ARM: OMAP2+: Move SDRC related functions from io.h into local common.h ARM: OMAP2+: Drop DISPC L3 firewall code ARM: OMAP2xxx: PM: remove obsolete timer disable code in the suspend path ARM: OMAP: McSPI: Remove unused flag from struct omap2_mcspi_device_config
2012-02-29Merge branch 'at91-3.4-base2+cleanup' of ↵Arnd Bergmann217-5606/+2873
git://github.com/at91linux/linux-at91 into at91/staging/base2+cleanup * 'at91-3.4-base2+cleanup' of git://github.com/at91linux/linux-at91: (20 commits) ARM: at91: properly sort dtb files in Makefile.boot ARM: at91: add at91sam9g25ek.dts in Makefile.boot ARM: at91/board-dt: drop default console Atmel: move console default platform_device to serial driver ARM: at91: merge SRAM Memory banks thanks to mirroring ARM: at91: finally drop at91_sys_read/write ARM: at91/rtc-at91sam9: pass the GPBR to use via resources ARM: at91:rtc/rtc-at91sam9: ioremap register bank ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use ARM: at91/PMC: make register base soc independent ARM: at91/PMC: move assignment out of printf ARM: at91/pm_slowclock: add runtime detection of memory contoller ARM: at91: make sdram/ddr register base soc independent ARM: at91: move at91rm9200 sdramc defines to at91rm9200_sdramc.h ARM: at91/pm_slowclock: function slow_clock() accepts parameters ARM: at91/pm_slowclock: rename register to named define ARM: at91/ST: remove not needed casts ARM: at91: make ST (System Timer) soc independent ARM: at91: make matrix register base soc independent ARM: at91/at91x40: remove use of at91_sys_read/write Based on top of the at91/9x5, rmk/for-armsoc, at91/device-board, at91/pm_cleanup and at91/base. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28ARM: OMAP2+: Fix L4_EMU_34XX_BASE error after iomap changesTony Lindgren1-0/+2
With the introduction of iomap changes platform init code fails for emu.c if CONFIG_OMAP3_EMU is selected: arch/arm/mach-omap2/emu.c:35:8: error: 'L4_EMU_34XX_BASE' undeclared here (not in a function) Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-28Merge branch 'iomap' into cleanupTony Lindgren93-270/+444
2012-02-24ARM: OMAP2+: Limit omap_read/write usage to legacy USB driversTony Lindgren4-50/+43
Drivers should no longer use omap_read/write functions but instead use ioremap + read/write functions. As some USB legacy code is still shared between omap1 and omap2420, let's limit the omap_read/write to plat/usb.h. Note that the long term fix is to update the drivers to use ioremap and read/write functions. That can now be done as a separate patch series that is limited to the USB drivers. Also make sure the legacy omap1-keypad.c driver builds if selected for 2420 based systems. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-24ARM: OMAP: Remove plat/io.h by splitting it into mach/io.h and mach/hardware.hTony Lindgren32-109/+184
This is needed to minimize io.h so the SoC specific io.h for ARMs can removed. Note that minimal driver changes for DSS and RNG are needed to include cpu.h for SoC detection macros. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-24ARM: OMAP2+: Move most of plat/io.h into local iomap.hTony Lindgren32-215/+264
There's no need to have these defines in plat/io.h. Note that we now need to ifdef omap_read/write calls as they will be available for omap1 only. While at it, clean up the includes to group them like they typically are grouped. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-24ARM: OMAP1: Move most of plat/io.h into local iomap.hTony Lindgren36-72/+152
There's no need to have these in plat/io.h. While at it, clean up the includes to group them like they typically are grouped. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-24ARM: OMAP1: Move 16xx GPIO system clock to platform init codeTony Lindgren2-7/+7
This way we can remove omap_read/write call from the GPIO driver and remove include to linux/io.h. Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-24ARM: OMAP: Move omap_init_consistent_dma_size() to local common.hTony Lindgren3-2/+3
We don't want to keep it in io.h as we want to remove io.h for omap2+ for the common zImage support. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-24ARM: OMAP2+: Move SDRC related functions from io.h into local common.hTony Lindgren2-4/+5
These should be local to omap2/3/4. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-24ARM: OMAP2+: Drop DISPC L3 firewall codeTony Lindgren1-5/+0
This is only needed when using SRAM for framebuffer, and the support for SRAM framebuffer is about to get removed. Otherwise we cannot move most of plat/io.h to be a local iomap.h for mach-omap2. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-24ARM: OMAP2xxx: PM: remove obsolete timer disable code in the suspend pathPaul Walmsley1-21/+1
Remove omap_{read,write}l() from the 24xx PM code. The clocksource code should now handle what this was supposed to do. Tested on N800 -- but it's hard to say whether this fixes anything. OMAP24xx static suspend path is currently broken, and this patch doesn't change that. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rob Herring <robherring2@gmail.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-24ARM: OMAP: McSPI: Remove unused flag from struct omap2_mcspi_device_configJarkko Nikula6-10/+0
Flag single_channel in struct omap2_mcspi_device_config is not used by drivers/spi/spi-omap2-mcspi.c so we may remove it from include/plat/mcspi.h and affected board files. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-23ARM: at91: properly sort dtb files in Makefile.bootJean-Christophe PLAGNIOL-VILLARD1-1/+6
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91: add at91sam9g25ek.dts in Makefile.bootNicolas Ferre1-0/+1
Reported-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91/board-dt: drop default consoleJean-Christophe PLAGNIOL-VILLARD2-9/+0
This default console mechanism is not used if the console is selected by command line (console= parameter). Dropping this will simplify the compilation of multiple SoC in the same kernel image. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23Atmel: move console default platform_device to serial driverJean-Christophe PLAGNIOL-VILLARD9-9/+2
This variable spread on every SoC that is using the atmel_serial.c driver can be included directly into the latter. This will allow to compile multiple soc in the same kernel. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: kernel@avr32linux.org
2012-02-23ARM: at91: merge SRAM Memory banks thanks to mirroringJean-Christophe PLAGNIOL-VILLARD2-8/+9
On at91sam9260 and at91sam9g20 the SRAM banks are mirrored. We can merge them together to be able to have bigger and continuous internal RAM. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91: finally drop at91_sys_read/writeJean-Christophe PLAGNIOL-VILLARD1-18/+0
Remove at91_sys_read/write() from io.h file. This function is not used anymore and was a stopper on the way to single zImage kernel for AT91. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91/rtc-at91sam9: pass the GPBR to use via resourcesJean-Christophe PLAGNIOL-VILLARD11-32/+114
The GPBR registers are used for storing RTC values. The GPBR registers to use are now provided using standard resource entry. The array is filled in SoC specific code. rtc-at91sam9 RTT as RTC driver is modified to retrieve this information. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> [nicolas.ferre@atmel.com: rework resources assignment] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Ryan Mallon <rmallon@gmail.com>
2012-02-23ARM: at91:rtc/rtc-at91sam9: ioremap register bankJean-Christophe PLAGNIOL-VILLARD1-3/+10
Instead of computing virtual address with AT91_VA_BASE_SYS, use the appropriate ioremap() call on the driver "memory" resource. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91/rtc-at91sam9: each SoC can select the RTT device to useJean-Christophe PLAGNIOL-VILLARD6-52/+75
For the RTT as RTC driver rtc-at91sam9, the platform_device structure is filled during SoC initialization. This will allow to convert this RTC driver as a standard platform driver. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91/PMC: make register base soc independentJean-Christophe PLAGNIOL-VILLARD14-95/+104
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Ryan Mallon <rmallon@gmail.com>
2012-02-23ARM: at91/PMC: move assignment out of printfNicolas Ferre1-5/+10
We move the assignment of values of register out of the seq_printf() calls: It is obviously more readable. Reported-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91/pm_slowclock: add runtime detection of memory contollerJean-Christophe PLAGNIOL-VILLARD3-22/+68
This will allow to have all SoC in one kernel image. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91: make sdram/ddr register base soc independentJean-Christophe PLAGNIOL-VILLARD34-89/+114
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 00:10:35 +0000