summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-02-25batman-adv: invalidate checksum on fragment reassemblyMatthias Schiffer1-1/+2
A more sophisticated implementation could try to combine fragment checksums when all fragments have CHECKSUM_COMPLETE and are split at even offsets. For now, we just set ip_summed to CHECKSUM_NONE to avoid "hw csum failure" warnings in the kernel log when fragmented frames are received. In consequence, skb_pull_rcsum() can be replaced with skb_pull(). Note that in usual setups, packets don't reach batman-adv with CHECKSUM_COMPLETE (I assume NICs bail out of checksumming when they see batadv's ethtype?), which is why the log messages do not occur on every system using batman-adv. I could reproduce this issue by stacking batman-adv on top of a VXLAN interface. Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge") Tested-by: Maximilian Wilhelm <max@sdn.clinic> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-25batman-adv: fix packet checksum in receive pathMatthias Schiffer1-7/+1
eth_type_trans() internally calls skb_pull(), which does not adjust the skb checksum; skb_postpull_rcsum() is necessary to avoid log spam of the form "bat0: hw csum failure" when packets with CHECKSUM_COMPLETE are received. Note that in usual setups, packets don't reach batman-adv with CHECKSUM_COMPLETE (I assume NICs bail out of checksumming when they see batadv's ethtype?), which is why the log messages do not occur on every system using batman-adv. I could reproduce this issue by stacking batman-adv on top of a VXLAN interface. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Tested-by: Maximilian Wilhelm <max@sdn.clinic> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-11Linux 4.16-rc1v4.16-rc1Linus Torvalds1-2/+2
2018-02-11unify {de,}mangle_poll(), get rid of kernel-side POLL...Al Viro8-142/+47
except, again, POLLFREE and POLL_BUSY_LOOP. With this, we finally get to the promised end result: - POLL{IN,OUT,...} are plain integers and *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds297-913/+913
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-11Merge branch 'work.poll2' of ↵Linus Torvalds8-40/+47
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more poll annotation updates from Al Viro: "This is preparation to solving the problems you've mentioned in the original poll series. After this series, the kernel is ready for running for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done as a for bulk search-and-replace. After that, the kernel is ready to apply the patch to unify {de,}mangle_poll(), and then get rid of kernel-side POLL... uses entirely, and we should be all done with that stuff. Basically, that's what you suggested wrt KPOLL..., except that we can use EPOLL... instead - they already are arch-independent (and equal to what is currently kernel-side POLL...). After the preparations (in this series) switch to returning EPOLL... from ->poll() instances is completely mechanical and kernel-side POLL... can go away. The last step (killing kernel-side POLL... and unifying {de,}mangle_poll() has to be done after the search-and-replace job, since we need userland-side POLL... for unified {de,}mangle_poll(), thus the cherry-pick at the last step. After that we will have: - POLL{IN,OUT,...} *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly)" * 'work.poll2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: annotate ep_scan_ready_list() ep_send_events_proc(): return result via esed->res preparation to switching ->poll() to returning EPOLL... add EPOLLNVAL, annotate EPOLL... and event_poll->event use linux/poll.h instead of asm/poll.h xen: fix poll misannotation smc: missing poll annotations
2018-02-11Merge tag 'xtensa-20180211' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds1-0/+2
Pull xtense fix from Max Filippov: "Build fix for xtensa architecture with KASAN enabled" * tag 'xtensa-20180211' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: fix build with KASAN
2018-02-11Merge tag 'nios2-v4.16-rc1' of ↵Linus Torvalds3-10/+8
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2 Pull nios2 update from Ley Foon Tan: - clean up old Kconfig options from defconfig - remove leading 0x and 0s from bindings notation in dts files * tag 'nios2-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: defconfig: Cleanup from old Kconfig options nios2: dts: Remove leading 0x and 0s from bindings notation
2018-02-11xtensa: fix build with KASANMax Filippov1-0/+2
The commit 917538e212a2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage") removed KASAN_SHADOW_SCALE_SHIFT definition from include/linux/kasan.h and added it to architecture-specific headers, except for xtensa. This broke the xtensa build with KASAN enabled. Define KASAN_SHADOW_SCALE_SHIFT in arch/xtensa/include/asm/kasan.h Reported by: kbuild test robot <fengguang.wu@intel.com> Fixes: 917538e212a2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage") Acked-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-02-11nios2: defconfig: Cleanup from old Kconfig optionsKrzysztof Kozlowski2-2/+0
Remove old, dead Kconfig option INET_LRO. It is gone since commit 7bbf3cae65b6 ("ipv4: Remove inet_lro library"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-02-11nios2: dts: Remove leading 0x and 0s from bindings notationMathieu Malaterre1-8/+8
Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} + For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation") Reported-by: David Daney <ddaney@caviumnetworks.com> Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Mathieu Malaterre <malat@debian.org> Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-02-10Merge tag 'pci-v4.16-fixes-1' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Fix a POWER9/powernv INTx regression from the merge window (Alexey Kardashevskiy)" * tag 'pci-v4.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: powerpc/pci: Fix broken INTx configuration via OF
2018-02-10Merge tag 'for-linus-20180210' of git://git.kernel.dk/linux-blockLinus Torvalds12-63/+212
Pull block fixes from Jens Axboe: "A few fixes to round off the merge window on the block side: - a set of bcache fixes by way of Michael Lyle, from the usual bcache suspects. - add a simple-to-hook-into function for bpf EIO error injection. - fix blk-wbt that mischarectized flushes as reads. Improve the logic so that flushes and writes are accounted as writes, and only reads as reads. From me. - fix requeue crash in BFQ, from Paolo" * tag 'for-linus-20180210' of git://git.kernel.dk/linux-block: block, bfq: add requeue-request hook bcache: fix for data collapse after re-attaching an attached device bcache: return attach error when no cache set exist bcache: set writeback_rate_update_seconds in range [1, 60] seconds bcache: fix for allocator and register thread race bcache: set error_limit correctly bcache: properly set task state in bch_writeback_thread() bcache: fix high CPU occupancy during journal bcache: add journal statistic block: Add should_fail_bio() for bpf error injection blk-wbt: account flush requests correctly
2018-02-10Merge tag 'platform-drivers-x86-v4.16-3' of git://github.com/dvhart/linux-pdx86Linus Torvalds2-11/+363
Pull x86 platform driver updates from Darren Hart: "Mellanox fixes and new system type support. Mostly data for new system types with a correction and an uninitialized variable fix" [ Pulling from github because git.infradead.org currently seems to be down for some reason, but Darren had a backup location - Linus ] * tag 'platform-drivers-x86-v4.16-3' of git://github.com/dvhart/linux-pdx86: platform/x86: mlx-platform: Add support for new 200G IB and Ethernet systems platform/x86: mlx-platform: Add support for new msn201x system type platform/x86: mlx-platform: Add support for new msn274x system type platform/x86: mlx-platform: Fix power cable setting for msn21xx family platform/x86: mlx-platform: Add define for the negative bus platform/x86: mlx-platform: Use defines for bus assignment platform/mellanox: mlxreg-hotplug: Fix uninitialized variable
2018-02-10Merge tag 'chrome-platform-for-linus-4.16' of ↵Linus Torvalds4-19/+57
git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform Pull chrome platform updates from Benson Leung: - move cros_ec_dev to drivers/mfd - other small maintenance fixes [ The cros_ec_dev movement came in earlier through the MFD tree - Linus ] * tag 'chrome-platform-for-linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: platform/chrome: Use proper protocol transfer function platform/chrome: cros_ec_lpc: Add support for Google Glimmer platform/chrome: cros_ec_lpc: Register the driver if ACPI entry is missing. platform/chrome: cros_ec_lpc: remove redundant pointer request cros_ec: fix nul-termination for firmware build info platform/chrome: chromeos_laptop: make chromeos_laptop const
2018-02-10Merge tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds123-1416/+6577
Pull KVM updates from Radim Krčmář: "ARM: - icache invalidation optimizations, improving VM startup time - support for forwarded level-triggered interrupts, improving performance for timers and passthrough platform devices - a small fix for power-management notifiers, and some cosmetic changes PPC: - add MMIO emulation for vector loads and stores - allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without requiring the complex thread synchronization of older CPU versions - improve the handling of escalation interrupts with the XIVE interrupt controller - support decrement register migration - various cleanups and bugfixes. s390: - Cornelia Huck passed maintainership to Janosch Frank - exitless interrupts for emulated devices - cleanup of cpuflag handling - kvm_stat counter improvements - VSIE improvements - mm cleanup x86: - hypervisor part of SEV - UMIP, RDPID, and MSR_SMI_COUNT emulation - paravirtualized TLB shootdown using the new KVM_VCPU_PREEMPTED bit - allow guests to see TOPOEXT, GFNI, VAES, VPCLMULQDQ, and more AVX512 features - show vcpu id in its anonymous inode name - many fixes and cleanups - per-VCPU MSR bitmaps (already merged through x86/pti branch) - stable KVM clock when nesting on Hyper-V (merged through x86/hyperv)" * tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (197 commits) KVM: PPC: Book3S: Add MMIO emulation for VMX instructions KVM: PPC: Book3S HV: Branch inside feature section KVM: PPC: Book3S HV: Make HPT resizing work on POWER9 KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code KVM: PPC: Book3S PR: Fix broken select due to misspelling KVM: x86: don't forget vcpu_put() in kvm_arch_vcpu_ioctl_set_sregs() KVM: PPC: Book3S PR: Fix svcpu copying with preemption enabled KVM: PPC: Book3S HV: Drop locks before reading guest memory kvm: x86: remove efer_reload entry in kvm_vcpu_stat KVM: x86: AMD Processor Topology Information x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested kvm: embed vcpu id to dentry of vcpu anon inode kvm: Map PFN-type memory regions as writable (if possible) x86/kvm: Make it compile on 32bit and with HYPYERVISOR_GUEST=n KVM: arm/arm64: Fixup userspace irqchip static key optimization KVM: arm/arm64: Fix userspace_irqchip_in_use counting KVM: arm/arm64: Fix incorrect timer_is_pending logic MAINTAINERS: update KVM/s390 maintainers MAINTAINERS: add Halil as additional vfio-ccw maintainer MAINTAINERS: add David as a reviewer for KVM/s390 ...
2018-02-10powerpc/pci: Fix broken INTx configuration via OFAlexey Kardashevskiy1-2/+3
59f47eff03a0 ("powerpc/pci: Use of_irq_parse_and_map_pci() helper") replaced of_irq_parse_pci() + irq_create_of_mapping() with of_irq_parse_and_map_pci(), but neglected to capture the virq returned by irq_create_of_mapping(), so virq remained zero, which caused INTx configuration to fail. Save the virq value returned by of_irq_parse_and_map_pci() and correct the virq declaration to match the of_irq_parse_and_map_pci() signature. Fixes: 59f47eff03a0 "powerpc/pci: Use of_irq_parse_and_map_pci() helper" Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-02-09Merge tag 'kbuild-v4.16-2' of ↵Linus Torvalds23-77/+121
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: "Makefile changes: - enable unused-variable warning that was wrongly disabled for clang Kconfig changes: - warn about blank 'help' and fix existing instances - fix 'choice' behavior to not write out invisible symbols - fix misc weirdness Coccinell changes: - fix false positive of free after managed memory alloc detection - improve performance of NULL dereference detection" * tag 'kbuild-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits) kconfig: remove const qualifier from sym_expand_string_value() kconfig: add xrealloc() helper kconfig: send error messages to stderr kconfig: echo stdin to stdout if either is redirected kconfig: remove check_stdin() kconfig: remove 'config*' pattern from .gitignnore kconfig: show '?' prompt even if no help text is available kconfig: do not write choice values when their dependency becomes n coccinelle: deref_null: avoid useless computation coccinelle: devm_free: reduce false positives kbuild: clang: disable unused variable warnings only when constant kconfig: Warn if help text is blank nios2: kconfig: Remove blank help text arm: vt8500: kconfig: Remove blank help text MIPS: kconfig: Remove blank help text MIPS: BCM63XX: kconfig: Remove blank help text lib/Kconfig.debug: Remove blank help text Staging: rtl8192e: kconfig: Remove blank help text Staging: rtl8192u: kconfig: Remove blank help text mmc: kconfig: Remove blank help text ...
2018-02-09mconsole_proc(): don't mess with file->f_posAl Viro1-1/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-09Merge branch 'for-linus' of ↵Linus Torvalds2-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs fixes from Al Viro. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: seq_file: fix incomplete reset on read from zero offset kernfs: fix regression in kernfs_fop_write caused by wrong type
2018-02-10kconfig: remove const qualifier from sym_expand_string_value()Masahiro Yamada3-4/+4
This function returns realloc'ed memory, so the returned pointer must be passed to free() when done. So, 'const' qualifier is odd. It is allowed to modify the expanded string. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-10kconfig: add xrealloc() helperMasahiro Yamada6-5/+16
We already have xmalloc(), xcalloc(). Add xrealloc() as well to save tedious error handling. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-09platform/x86: mlx-platform: Add support for new 200G IB and Ethernet systemsVadim Pasternak1-0/+142
It adds support for new Mellanox system types of basic classes qmb7, sn34, sn37, containing systems QMB700 (40x200GbE InfiniBand switch), SN3700 (32x200GbE and 16x400GbE Ethernet switch) and SN3410 (6x400GbE plus 48x50GbE Ethernet switch). These are the Top of the Rack systems, equipped with Mellanox COM-Express carrier board and switch board with Mellanox Quantum device, which supports InfiniBand switching with 40X200G ports and line rate of up to HDR speed or with Mellanox Spectrum-2 device, which supports Ethernet switching with 32X200G ports line rate of up to HDR speed. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-02-09platform/x86: mlx-platform: Add support for new msn201x system typeVadim Pasternak1-0/+59
It adds support for new Mellanox system types of basic half unit size class msn201x, containing system MSN2010 (18x10GbE plus 4x4x25GbE) half and its derivatives. This is the Top of the Rack system, equipped with Mellanox Small Form Factor carrier board and switch board with Mellanox Spectrum device, which supports Ethernet switching with 32X100G ports line rate of up to EDR speed. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-02-09platform/x86: mlx-platform: Add support for new msn274x system typeVadim Pasternak1-0/+124
It adds support for new Mellanox system types of basic class msn274x, containing system MSN2740 (32x100GbE Ethernet switch with cost reduction) and its derivatives. These are the Top of the Rack system, equipped with Mellanox Small Form Factor carrier board and switch board with Mellanox Spectrum device, which supports Ethernet switching with 32X100G ports line rate of up to EDR speed. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-02-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds113-395/+1253
Pull networking fixes from David Miller: 1) Make allocations less aggressive in x_tables, from Minchal Hocko. 2) Fix netfilter flowtable Kconfig deps, from Pablo Neira Ayuso. 3) Fix connection loss problems in rtlwifi, from Larry Finger. 4) Correct DRAM dump length for some chips in ath10k driver, from Yu Wang. 5) Fix ABORT handling in rxrpc, from David Howells. 6) Add SPDX tags to Sun networking drivers, from Shannon Nelson. 7) Some ipv6 onlink handling fixes, from David Ahern. 8) Netem packet scheduler interval calcualtion fix from Md. Islam. 9) Don't put crypto buffers on-stack in rxrpc, from David Howells. 10) Fix handling of error non-delivery status in netlink multicast delivery over multiple namespaces, from Nicolas Dichtel. 11) Missing xdp flush in tuntap driver, from Jason Wang. 12) Synchonize RDS protocol netns/module teardown with rds object management, from Sowini Varadhan. 13) Add nospec annotations to mpls, from Dan Williams. 14) Fix SKB truesize handling in TIPC, from Hoang Le. 15) Interrupt masking fixes in stammc from Niklas Cassel. 16) Don't allow ptr_ring objects to be sized outside of kmalloc's limits, from Jason Wang. 17) Don't allow SCTP chunks to be built which will have a length exceeding the chunk header's 16-bit length field, from Alexey Kodanev. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (82 commits) ibmvnic: Remove skb->protocol checks in ibmvnic_xmit bpf: fix rlimit in reuseport net selftest sctp: verify size of a new chunk in _sctp_make_chunk() s390/qeth: fix SETIP command handling s390/qeth: fix underestimated count of buffer elements ptr_ring: try vmalloc() when kmalloc() fails ptr_ring: fail early if queue occupies more than KMALLOC_MAX_SIZE net: stmmac: remove redundant enable of PMT irq net: stmmac: rename GMAC_INT_DEFAULT_MASK for dwmac4 net: stmmac: discard disabled flags in interrupt status register ibmvnic: Reset long term map ID counter tools/libbpf: handle issues with bpf ELF objects containing .eh_frames selftests/bpf: add selftest that use test_libbpf_open selftests/bpf: add test program for loading BPF ELF files tools/libbpf: improve the pr_debug statements to contain section numbers bpf: Sync kernel ABI header with tooling header for bpf_common.h net: phy: fix phy_start to consider PHY_IGNORE_INTERRUPT net: thunder: change q_len's type to handle max ring size tipc: fix skb truesize/datasize ratio control net/sched: cls_u32: fix cls_u32 on filter replace ...
2018-02-09Merge tag 'nfs-for-4.16-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds6-23/+36
Pull more NFS client updates from Trond Myklebust: "A few bugfixes and some small sunrpc latency/performance improvements before the merge window closes: Stable fixes: - fix an incorrect calculation of the RDMA send scatter gather element limit - fix an Oops when attempting to free resources after RDMA device removal Bugfixes: - SUNRPC: Ensure we always release the TCP socket in a timely fashion when the connection is shut down. - SUNRPC: Don't call __UDPX_INC_STATS() from a preemptible context Latency/Performance: - SUNRPC: Queue latency sensitive socket tasks to the less contended xprtiod queue - SUNRPC: Make the xprtiod workqueue unbounded. - SUNRPC: Make the rpciod workqueue unbounded" * tag 'nfs-for-4.16-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Don't call __UDPX_INC_STATS() from a preemptible context fix parallelism for rpc tasks Make the xprtiod workqueue unbounded. SUNRPC: Queue latency-sensitive socket tasks to xprtiod SUNRPC: Ensure we always close the socket after a connection shuts down xprtrdma: Fix BUG after a device removal xprtrdma: Fix calculation of ri_max_send_sges
2018-02-09Merge branch 'for-next' of ↵Linus Torvalds15-389/+798
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The highlights include: - numerous target-core-user improvements related to queue full and timeout handling. (MNC) - prevent target-core-user corruption when invalid data page is requested. (MNC) - add target-core device action configfs attributes to allow user-space to trigger events separate from existing attributes exposed to end-users. (MNC) - fix iscsi-target NULL pointer dereference 4.6+ regression in CHAP error path. (David Disseldorp) - avoid target-core backend UNMAP callbacks if range is zero. (Andrei Vagin) - fix a iscsi-target 4.14+ regression related multiple PDU logins, that was exposed due to removal of TCP prequeue support. (Florian Westphal + MNC) Also, there is a iser-target bug still being worked on for post -rc1 code to address a long standing issue resulting in persistent ib_post_send() failures, for RNICs with small max_send_sge" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (36 commits) iscsi-target: make sure to wake up sleeping login worker tcmu: Fix trailing semicolon tcmu: fix cmd user after free target: fix destroy device in target_configure_device tcmu: allow userspace to reset ring target core: add device action configfs files tcmu: fix error return code in tcmu_configure_device() target_core_user: add cmd id to broken ring message target: add SAM_STAT_BUSY sense reason tcmu: prevent corruption when invalid data page requested target: don't call an unmap callback if a range length is zero target/iscsi: avoid NULL dereference in CHAP auth error path cxgbit: call neigh_event_send() to update MAC address target: tcm_loop: Use seq_puts() in tcm_loop_show_info() target: tcm_loop: Delete an unnecessary return statement in tcm_loop_submission_work() target: tcm_loop: Delete two unnecessary variable initialisations in tcm_loop_issue_tmr() target: tcm_loop: Combine substrings for 26 messages target: tcm_loop: Improve a size determination in two functions target: tcm_loop: Delete an error message for a failed memory allocation in four functions sbp-target: Delete an error message for a failed memory allocation in three functions ...
2018-02-09Merge tag 'trace-v4.16-rc1' of ↵Linus Torvalds5-9/+54
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Al Viro discovered some breakage with the parsing of the set_ftrace_filter as well as the removing of function probes. This fixes the code with Al's suggestions. I also added a few selftests to test the broken cases such that they wont happen again" * tag 'trace-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: selftests/ftrace: Add more tests for removing of function probes selftests/ftrace: Add some missing glob checks selftests/ftrace: Have reset_ftrace_filter handle multiple instances selftests/ftrace: Have reset_ftrace_filter handle modules tracing: Fix parsing of globs with a wildcard at the beginning ftrace: Remove incorrect setting of glob search field
2018-02-09Merge tag '4.16-minor-rc-SMB3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds4-13/+130
Pull cifs fixes from Steve French: "There are a couple additional security fixes that are still being tested that are not in this set." * tag '4.16-minor-rc-SMB3-fixes' of git://git.samba.org/sfrench/cifs-2.6: Add missing structs and defines from recent SMB3.1.1 documentation address lock imbalance warnings in smbdirect.c cifs: silence compiler warnings showing up with gcc-8.0.0 Add some missing debug fields in server and tcon structs
2018-02-09Merge tag 'fbdev-v4.16-fix' of git://github.com/bzolnier/linuxLinus Torvalds4-0/+6
Pull fbdev fix from Bartlomiej Zolnierkiewicz: "Fix building of the omapfb driver (Tomi Valkeinen)" * tag 'fbdev-v4.16-fix' of git://github.com/bzolnier/linux: video: omapfb: fix missing #includes
2018-02-09Merge tag 'kvm-ppc-next-4.16-2' of ↵Radim Krčmář12-39/+251
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc Second PPC KVM update for 4.16 Seven fixes that are either trivial or that address bugs that people are actually hitting. The main ones are: - Drop spinlocks before reading guest memory - Fix a bug causing corruption of VCPU state in PR KVM with preemption enabled - Make HPT resizing work on POWER9 - Add MMIO emulation for vector loads and stores, because guests now use these instructions in memcpy and similar routines.
2018-02-09Merge branch 'msr-bitmaps' of git://git.kernel.org/pub/scm/virt/kvm/kvmRadim Krčmář1-143/+164
This topic branch allocates separate MSR bitmaps for each VCPU. This is required for the IBRS enablement to choose, on a per-VM basis, whether to intercept the SPEC_CTRL and PRED_CMD MSRs; the IBRS enablement comes in through the tip tree.
2018-02-09ibmvnic: Remove skb->protocol checks in ibmvnic_xmitJohn Allen1-4/+1
Having these checks in ibmvnic_xmit causes problems with VLAN tagging and balance-alb/tlb bonding modes. The restriction they imposed can be removed. Signed-off-by: John Allen <jallen@linux.vnet.ibm.com> Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-09bpf: fix rlimit in reuseport net selftestDaniel Borkmann1-1/+20
Fix two issues in the reuseport_bpf selftests that were reported by Linaro CI: [...] + ./reuseport_bpf ---- IPv4 UDP ---- Testing EBPF mod 10... Reprograming, testing mod 5... ./reuseport_bpf: ebpf error. log: 0: (bf) r6 = r1 1: (20) r0 = *(u32 *)skb[0] 2: (97) r0 %= 10 3: (95) exit processed 4 insns : Operation not permitted + echo FAIL [...] ---- IPv4 TCP ---- Testing EBPF mod 10... ./reuseport_bpf: failed to bind send socket: Address already in use + echo FAIL [...] For the former adjust rlimit since this was the cause of failure for loading the BPF prog, and for the latter add SO_REUSEADDR. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Link: https://bugs.linaro.org/show_bug.cgi?id=3502 Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-09sctp: verify size of a new chunk in _sctp_make_chunk()Alexey Kodanev1-1/+6
When SCTP makes INIT or INIT_ACK packet the total chunk length can exceed SCTP_MAX_CHUNK_LEN which leads to kernel panic when transmitting these packets, e.g. the crash on sending INIT_ACK: [ 597.804948] skbuff: skb_over_panic: text:00000000ffae06e4 len:120168 put:120156 head:000000007aa47635 data:00000000d991c2de tail:0x1d640 end:0xfec0 dev:<NULL> ... [ 597.976970] ------------[ cut here ]------------ [ 598.033408] kernel BUG at net/core/skbuff.c:104! [ 600.314841] Call Trace: [ 600.345829] <IRQ> [ 600.371639] ? sctp_packet_transmit+0x2095/0x26d0 [sctp] [ 600.436934] skb_put+0x16c/0x200 [ 600.477295] sctp_packet_transmit+0x2095/0x26d0 [sctp] [ 600.540630] ? sctp_packet_config+0x890/0x890 [sctp] [ 600.601781] ? __sctp_packet_append_chunk+0x3b4/0xd00 [sctp] [ 600.671356] ? sctp_cmp_addr_exact+0x3f/0x90 [sctp] [ 600.731482] sctp_outq_flush+0x663/0x30d0 [sctp] [ 600.788565] ? sctp_make_init+0xbf0/0xbf0 [sctp] [ 600.845555] ? sctp_check_transmitted+0x18f0/0x18f0 [sctp] [ 600.912945] ? sctp_outq_tail+0x631/0x9d0 [sctp] [ 600.969936] sctp_cmd_interpreter.isra.22+0x3be1/0x5cb0 [sctp] [ 601.041593] ? sctp_sf_do_5_1B_init+0x85f/0xc30 [sctp] [ 601.104837] ? sctp_generate_t1_cookie_event+0x20/0x20 [sctp] [ 601.175436] ? sctp_eat_data+0x1710/0x1710 [sctp] [ 601.233575] sctp_do_sm+0x182/0x560 [sctp] [ 601.284328] ? sctp_has_association+0x70/0x70 [sctp] [ 601.345586] ? sctp_rcv+0xef4/0x32f0 [sctp] [ 601.397478] ? sctp6_rcv+0xa/0x20 [sctp] ... Here the chunk size for INIT_ACK packet becomes too big, mostly because of the state cookie (INIT packet has large size with many address parameters), plus additional server parameters. Later this chunk causes the panic in skb_put_data(): skb_packet_transmit() sctp_packet_pack() skb_put_data(nskb, chunk->skb->data, chunk->skb->len); 'nskb' (head skb) was previously allocated with packet->size from u16 'chunk->chunk_hdr->length'. As suggested by Marcelo we should check the chunk's length in _sctp_make_chunk() before trying to allocate skb for it and discard a chunk if its size bigger than SCTP_MAX_CHUNK_LEN. Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leinter@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-09Merge branch 's390-qeth-fixes'David S. Miller2-7/+14
Julian Wiedmann says: ==================== s390/qeth: fixes 2018-02-09 please apply the following two qeth patches for 4.16 and stable. One restricts a command quirk to the intended commandd type, while the other fixes an off-by-one during data transmission that can cause qeth to build malformed buffer descriptors. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-09s390/qeth: fix SETIP command handlingJulian Wiedmann2-6/+13
send_control_data() applies some special handling to SETIP v4 IPA commands. But current code parses *all* command types for the SETIP command code. Limit the command code check to IPA commands. Fixes: 5b54e16f1a54 ("qeth: do not spin for SETIP ip assist command") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-09s390/qeth: fix underestimated count of buffer elementsUrsula Braun1-1/+1
For a memory range/skb where the last byte falls onto a page boundary (ie. 'end' is of the form xxx...xxx001), the PFN_UP() part of the calculation currently doesn't round up to the next PFN due to an off-by-one error. Thus qeth believes that the skb occupies one page less than it actually does, and may select a IO buffer that doesn't have enough spare buffer elements to fit all of the skb's data. HW detects this as a malformed buffer descriptor, and raises an exception which then triggers device recovery. Fixes: 2863c61334aa ("qeth: refactor calculation of SBALE count") Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-09ptr_ring: try vmalloc() when kmalloc() failsJason Wang1-5/+8
This patch switch to use kvmalloc_array() for using a vmalloc() fallback to help in case kmalloc() fails. Reported-by: syzbot+e4d4f9ddd4295539735d@syzkaller.appspotmail.com Fixes: 2e0ab8ca83c12 ("ptr_ring: array based FIFO for pointers") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-09ptr_ring: fail early if queue occupies more than KMALLOC_MAX_SIZEJason Wang1-0/+2
To avoid slab to warn about exceeded size, fail early if queue occupies more than KMALLOC_MAX_SIZE. Reported-by: syzbot+e4d4f9ddd4295539735d@syzkaller.appspotmail.com Fixes: 2e0ab8ca83c12 ("ptr_ring: array based FIFO for pointers") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-09Merge branch 'stmmac-irq-fixes-cleanups'David S. Miller3-9/+8
Niklas Cassel says: ==================== stmmac irq fixes/cleanups A couple of small stmmac irq fixes/cleanups. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-09net: stmmac: remove redundant enable of PMT irqNiklas Cassel2-4/+1
For dwmac4, GMAC_INT_DEFAULT_ENABLE already includes GMAC_INT_PMT_EN, so it is redundant to check if hw->pmt is set, and if so, setting the bit again. For dwmac1000, GMAC_INT_DEFAULT_MASK does not include GMAC_INT_DISABLE_PMT, so it is redundant to check if hw->pmt is set, and if so, clearing an already cleared bit. Improve code readability by removing this redundant code. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-09net: stmmac: rename GMAC_INT_DEFAULT_MASK for dwmac4Niklas Cassel2-3/+3
GMAC_INT_DEFAULT_MASK is written to the interrupt enable register. In previous versions of the IP (e.g. dwmac1000), this register was instead an interrupt mask register. To improve clarity and reflect reality, rename GMAC_INT_DEFAULT_MASK to GMAC_INT_DEFAULT_ENABLE. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-09net: stmmac: discard disabled flags in interrupt status registerNiklas Cassel1-2/+4
The interrupt status register in both dwmac1000 and dwmac4 ignores interrupt enable (for dwmac4) / interrupt mask (for dwmac1000). Therefore, if we want to check only the bits that can actually trigger an irq, we have to filter the interrupt status register manually. Commit 0a764db10337 ("stmmac: Discard masked flags in interrupt status register") fixed this for dwmac1000. Fix the same issue for dwmac4. Just like commit 0a764db10337 ("stmmac: Discard masked flags in interrupt status register"), this makes sure that we do not get spurious link up/link down prints. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-09ibmvnic: Reset long term map ID counterThomas Falcon1-0/+1
When allocating RX or TX buffer pools, the driver needs to provide a unique mapping ID to firmware for each pool. This value is assigned using a counter which is incremented after a new pool is created. The ID can be an integer ranging from 1-255. When migrating to a device that requests a different number of queues, this value was not being reset properly. As a result, after enough migrations, the counter exceeded the upper bound and pool creation failed. This is fixed by resetting the counter to one in this case. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller18-111/+557
Daniel Borkmann says: ==================== pull-request: bpf 2018-02-09 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Two fixes for BPF sockmap in order to break up circular map references from programs attached to sockmap, and detaching related sockets in case of socket close() event. For the latter we get rid of the smap_state_change() and plug into ULP infrastructure, which will later also be used for additional features anyway such as TX hooks. For the second issue, dependency chain is broken up via map release callback to free parse/verdict programs, all from John. 2) Fix a libbpf relocation issue that was found while implementing XDP support for Suricata project. Issue was that when clang was invoked with default target instead of bpf target, then various other e.g. debugging relevant sections are added to the ELF file that contained relocation entries pointing to non-BPF related sections which libbpf trips over instead of skipping them. Test cases for libbpf are added as well, from Jesper. 3) Various misc fixes for bpftool and one for libbpf: a small addition to libbpf to make sure it recognizes all standard section prefixes. Then, the Makefile in bpftool/Documentation is improved to explicitly check for rst2man being installed on the system as we otherwise risk installing empty man pages; the man page for bpftool-map is corrected and a set of missing bash completions added in order to avoid shipping bpftool where the completions are only partially working, from Quentin. 4) Fix applying the relocation to immediate load instructions in the nfp JIT which were missing a shift, from Jakub. 5) Two fixes for the BPF kernel selftests: handle CONFIG_BPF_JIT_ALWAYS_ON=y gracefully in test_bpf.ko module and mark them as FLAG_EXPECTED_FAIL in this case; and explicitly delete the veth devices in the two tests test_xdp_{meta,redirect}.sh before dismantling the netnses as when selftests are run in batch mode, then workqueue to handle destruction might not have finished yet and thus veth creation in next test under same dev name would fail, from Yonghong. 6) Fix test_kmod.sh to check the test_bpf.ko module path before performing an insmod, and fallback to modprobe. Especially the latter is useful when having a device under test that has the modules installed instead, from Naresh. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-09Merge tag 'for-linus-4.16-rc1-tag' of ↵Linus Torvalds5-25/+49
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Only five small fixes for issues when running under Xen" * tag 'for-linus-4.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Fix {set,clear}_foreign_p2m_mapping on autotranslating guests pvcalls-back: do not return error on inet_accept EAGAIN xen-netfront: Fix race between device setup and open xen/grant-table: Use put_page instead of free_page x86/xen: init %gs very early to avoid page faults with stack protector
2018-02-09Merge branch 'for-linus' of ↵Linus Torvalds35-133/+725
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: "The main thing in this merge is the defense for the Spectre vulnerabilities. But there are other updates as well, the changes in more detail: - An s390 specific implementation of the array_index_mask_nospec function to the defense against spectre v1 - Two patches to utilize the new PPA-12/PPA-13 instructions to run the kernel and/or user space with reduced branch predicton. - The s390 variant of the 'retpoline' spectre v2 defense called 'expoline'. There is no return instruction for s390, instead an indirect branch is used for function return The s390 defense mechanism for indirect branches works by using an execute-type instruction with the indirect branch as the target of the execute. In effect that turns off the prediction for the indirect branch. - Scrub registers in entry.S that contain user controlled values to prevent the speculative use of these values. - Re-add the second parameter for the s390 specific runtime instrumentation system call and move the header file to uapi. The second parameter will continue to do nothing but older kernel versions only accepted valid real-time signal numbers. The details will be documented in the man-page for the system call. - Corrections and improvements for the s390 specific documentation - Add a line to /proc/sysinfo to display the CPU model dependent license-internal-code identifier - A header file include fix for eadm. - An error message fix in the kprobes code. - The removal of an outdated ARCH_xxx select statement" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/kconfig: Remove ARCH_WANTS_PROT_NUMA_PROT_NONE select s390: introduce execute-trampolines for branches s390: run user space and KVM guests with modified branch prediction s390: add options to change branch prediction behaviour for the kernel s390/alternative: use a copy of the facility bit mask s390: add optimized array_index_mask_nospec s390: scrub registers on kernel entry and KVM exit s390/cio: fix kernel-doc usage s390/runtime_instrumentation: re-add signum system call parameter s390/cpum_cf: correct counter number of LAST_HOST_TRANSLATIONS s390/kprobes: Fix %p uses in error messages s390/runtime instrumentation: provide uapi header file s390/sysinfo: add and display licensed internal code identifier s390/docs: reword airq section s390/docs: mention subchannel types s390/cmf: fix kerneldoc s390/eadm: fix CONFIG_BLOCK include dependency
2018-02-09Merge tag 'acpi-part2-4.16-rc1' of ↵Linus Torvalds247-288/+366
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "These are mostly fixes and cleanups, a few new quirks, a couple of updates related to the handling of ACPI tables and ACPICA copyrights refreshment. Specifics: - Update the ACPICA kernel code to upstream revision 20180105 including: * Assorted fixes (Jung-uk Kim) * Support for X32 ABI compilation (Anuj Mittal) * Update of ACPICA copyrights to 2018 (Bob Moore) - Prepare for future modifications to avoid executing the _STA control method too early (Hans de Goede) - Make the processor performance control library code ignore _PPC notifications if they cannot be handled and fix up the C1 idle state definition when it is used as a fallback state (Chen Yu, Yazen Ghannam) - Make it possible to use the SPCR table on x86 and to replace the original IORT table with a new one from initrd (Prarit Bhargava, Shunyong Yang) - Add battery-related quirks for Asus UX360UA and UX410UAK and add quirks for table parsing on Dell XPS 9570 and Precision M5530 (Kai Heng Feng) - Address static checker warnings in the CPPC code (Gustavo Silva) - Avoid printing a raw pointer to the kernel log in the smart battery driver (Greg Kroah-Hartman)" * tag 'acpi-part2-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: sbshc: remove raw pointer from printk() message ACPI: SPCR: Make SPCR available to x86 ACPI / CPPC: Use 64-bit arithmetic instead of 32-bit ACPI / tables: Add IORT to injectable table list ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530 ACPICA: Update version to 20180105 ACPICA: All acpica: Update copyrights to 2018 ACPI / processor: Set default C1 idle state description ACPI / battery: Add quirk for Asus UX360UA and UX410UAK ACPI: processor_perflib: Do not send _PPC change notification if not ready ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs ACPI / bus: Do not call _STA on battery devices with unmet dependencies PCI: acpiphp_ibm: prepare for acpi_get_object_info() no longer returning status ACPI: export acpi_bus_get_status_handle() ACPICA: Add a missing pair of parentheses ACPICA: Prefer ACPI_TO_POINTER() over ACPI_ADD_PTR() ACPICA: Avoid NULL pointer arithmetic ACPICA: Linux: add support for X32 ABI compilation ACPI / video: Use true for boolean value
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 10:51:51 +0000