summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-01-03net: mvneta: ensure PM paths take the rtnl lockRussell King1-0/+4
The netdev core always ensures that the rtnl lock is held while calling the ndo_open() and ndo_stop() methods. However, the suspend/resume paths do not hold the rtnl lock. phylink will expect the rtnl lock to be held when the MAC driver calls it, so we end up with kernel warnings. Take the lock to ensure that these functions are called in a consistent manner. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03Merge branch 'net-Renesas-kill-redundant-checks'David S. Miller2-4/+2
Sergei Shtylyov says: ==================== Kill redundant checks in the Renesas Ethernet drivers Here's a set of 2 patches against DaveM's 'net-next.git' repo removing redundant checks in the driver probe() methods. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03sh_eth: kill redundant check in the probe() methodSergei Shtylyov1-2/+1
Browsing thru the driver disassembly, I noticed that gcc was able to figure out that the 'ndev' pointer is always non-NULL when calling free_netdev() on the probe() method's error path and thus skip that redundant NULL check... gcc is smart, be like gcc! :-) Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03ravb: kill redundant check in the probe() methodSergei Shtylyov1-2/+1
Browsing thru the driver disassembly, I noticed that gcc was able to figure out that the 'ndev' pointer is always non-NULL when calling free_netdev() on the probe() method's error path and thus skip that redundant NULL check... gcc is smart, be like gcc! :-) Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02liquidio: Use zeroing memory allocator than allocator/memsetHimanshu Jha1-5/+2
Use vzalloc for allocating zeroed memory and remove unnecessary memset function. Done using Coccinelle. Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci 0-day tested with no failures. Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02ethernet/broadcom: Use zeroing memory allocator than allocator/memsetHimanshu Jha2-7/+4
Use dma_zalloc_coherent for allocating zeroed memory and remove unnecessary memset function. Done using Coccinelle. Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci 0-day tested with no failures. Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02qed: Use zeroing memory allocator than allocator/memsetHimanshu Jha2-9/+6
Use dma_zalloc_coherent and vzalloc for allocating zeroed memory and remove unnecessary memset function. Done using Coccinelle. Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci 0-day tested with no failures. Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Acked-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02Merge branch 'net-stmmac-Couple-of-debug-prints-improvements'David S. Miller4-6/+5
Florian Fainelli says: ==================== net: stmmac: Couple of debug prints improvements While working on a particular problem, I had to turn on debug prints and found them to be useful, but could deserve some improvements in order to help debug situations. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: stmmac: Allow debug prints of frame_len/COEFlorian Fainelli1-3/+2
There is no reason not to allow printing the frame_len/COE value and put that under a check for ETH_FRAME_LEN, drop it so we can see what the descriptor reports. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: stmmac: Pad ring number with zeroes in display_ring()Florian Fainelli3-3/+3
Make the printing of the ring number consistent and properly aligned by padding the ring number with up to 3 zeroes, which covers the maximum ring size. This makes it a lot easier to see outliers in debug prints. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: dsa: Fix dsa_legacy_register() return valueFlorian Fainelli1-1/+1
We need to make the dsa_legacy_register() stub return 0 in order for dsa_init_module() to successfully register and continue registering the ETH_P_XDSA packet handler. Fixes: 2a93c1a3651f ("net: dsa: Allow compiling out legacy support") Reported-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02Merge branch 'further-sfp-phylink-updates'David S. Miller4-62/+114
Russell King says: ==================== further sfp/phylink updates This series: - cleans up printing of module information - improves the transceiver capability decoding, getting rid of the guessing by connector type, improves direct-attach cable support and adds support for 1G Base-PX and Base-BX10 modules. - cleans up phylink_sfp_module_insert() ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02phylink: remove 'mode' variable from phylink_sfp_module_insert()Russell King1-7/+8
'mode' is actually constant through phylink_sfp_module_insert(), so remove it and replace it with the enumerated constant. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02sfp: improve support for direct-attach copper cablesRussell King2-8/+79
Improve the support for direct-attach copper so that we avoid kernel warning messages, and report the appropriate PORT_DA type to userspace. Direct Attach cables can use a number of protocols depending on their range of speeds. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02sfp: add support for 1000Base-PX and 1000Base-BX10Russell King1-0/+21
Add support for decoding the transceiver information for 1000Base-PX and 1000Base-BX10. These use 1000BASE-X protocol. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02sfp: don't guess support from connector typeRussell King1-29/+0
Don't try to guess the support mask from the connector type - this is mostly irrelevant to the speeds that the transceiver supports. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02sfp: use precision to print non-null terminated stringsRussell King1-18/+6
Rather than memcpy()'ing the strings and null terminate them, printf allows non-NULL terminated strings provided the precision is not more than the size of the buffer. Use this form to print the basic module information rather than copying and terminating the strings. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02Merge branch 'marvell10g-phy-updates'David S. Miller4-41/+148
Russell King says: ==================== marvell10g updates This series: - adds MDI/MDIX reporting - adds support for 10/100Mbps half-duplex link modes - adds a comment describing the setup on VF610 ZII boards (where the phy interface mode doesn't change.) - cleans up the phy interace mode switching ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: phy: marvell10g: add support for half duplex 100M and 10MRussell King1-25/+12
Add support for half-duplex 100M and 10M copper connections by parsing the advertisment results rather than trying to decode the negotiated speed from one of the PHYs "vendor" registers. This allows us to decode the duplex as well, which means we can support half-duplex mode for the slower speeds. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: phy: add helper to convert negotiation result to phy settingsRussell King2-0/+45
Add a helper to convert the result of the autonegotiation advertisment into the PHYs speed and duplex settings. If the result is full duplex, also extract the pause mode settings from the link partner advertisment. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: phy: marvell10g: clean up interface mode switchingRussell King1-16/+20
Centralise the PHY interface mode switching, rather than having it in two places. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: phy: marvell10g: add MDI swap reportingRussell King3-0/+65
Add reporting of the MDI swap to the Marvell 10G PHY driver by providing a generic implementation for the standard 10GBASE-T pair swap register and polarity register. We also support reading the MDI swap status for 1G and below from a PCS register. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: phy: marvell10g: update header commentsRussell King1-1/+7
Update header comments to indicate the newly found behaviour with XAUI interfaces. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: hns: add ACPI mode support for ethtool -pJian Shen2-2/+57
The locate operation interface of fiber port can only work with DT mode. Add a new interface to control the locate led for ACPI mode. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Tested-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02cxgb4: Check alignment constraint for T6Ganesh Goudar1-5/+12
Update the check for setting IPV4 filters and align filter_id to multiple of 2, only for IPv6 filters in case of T6. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02Merge branch 'ena-next'David S. Miller5-8/+81
Netanel Belgazal says: ==================== update ENA driver to version 1.5.0 This patchset contains two changes: * Add a robust mechanism for detection of stuck Rx/Tx rings due to missed or misrouted MSI-X * Increase the driver version to 1.5.0 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: ena: increase ena driver version to 1.5.0Netanel Belgazal1-1/+1
Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: ena: add detection and recovery mechanism for handling missed/misrouted ↵Netanel Belgazal5-7/+80
MSI-X A mechanism for detection of stuck Rx/Tx rings due to missed or misrouted interrupts. Check if there are unhandled completion descriptors before the first MSI-X interrupt arrived. The check is per queue and per interrupt vector. Once such condition is detected, driver and device reset is scheduled. Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02Merge branch 'tcp-sctp-dccp-Replace-jprobe-usage-with-trace-events'David S. Miller16-800/+303
Masami Hiramatsu says: ==================== net: tcp: sctp: dccp: Replace jprobe usage with trace events This series is v7 of the replacement of jprobe usage with trace events. This version fixes net/dccp/trace.h to avoid sparse warning. Since the TP_STORE_ADDR_PORTS macro can be shared with trace/events/tcp.h, it also introduce a new common header file and move the definition of that macro. Previous version is here; https://lkml.org/lkml/2017/12/28/7 Changes from v6: [5/6]: Avoid preprocessor directives in tracepoint macro args ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: dccp: Remove dccpprobe moduleMasami Hiramatsu3-222/+0
Remove DCCP probe module since jprobe has been deprecated. That function is now replaced by dccp/dccp_probe trace-event. You can use it via ftrace or perftools. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: dccp: Add DCCP sendmsg trace eventMasami Hiramatsu5-38/+137
Add DCCP sendmsg trace event (dccp/dccp_probe) for replacing dccpprobe. User can trace this event via ftrace or perftools. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: sctp: Remove debug SCTP probe moduleMasami Hiramatsu3-259/+0
Remove SCTP probe module since jprobe has been deprecated. That function is now replaced by sctp/sctp_probe and sctp/sctp_probe_path trace-events. You can use it via ftrace or perftools. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: sctp: Add SCTP ACK tracking trace eventMasami Hiramatsu2-0/+104
Add SCTP ACK tracking trace event to trace the changes of SCTP association state in response to incoming packets. It is used for debugging SCTP congestion control algorithms, and will replace sctp_probe module. Note that this event a bit tricky. Since this consists of 2 events (sctp_probe and sctp_probe_path) so you have to enable both events as below. # cd /sys/kernel/debug/tracing # echo 1 > events/sctp/sctp_probe/enable # echo 1 > events/sctp/sctp_probe_path/enable Or, you can enable all the events under sctp. # echo 1 > events/sctp/enable Since sctp_probe_path event is always invoked from sctp_probe event, you can not see any output if you only enable sctp_probe_path. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: tcp: Remove TCP probe moduleMasami Hiramatsu3-319/+0
Remove TCP probe module since jprobe has been deprecated. That function is now replaced by tcp/tcp_probe trace-event. You can use it via ftrace or perftools. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: tcp: Add trace events for TCP congestion window tracingMasami Hiramatsu2-0/+100
This adds an event to trace TCP stat variables with slightly intrusive trace-event. This uses ftrace/perf event log buffer to trace those state, no needs to prepare own ring-buffer, nor custom user apps. User can use ftrace to trace this event as below; # cd /sys/kernel/debug/tracing # echo 1 > events/tcp/tcp_probe/enable (run workloads) # cat trace Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02Merge branch 'qed-Advance-to-FW-8.33.1.0'David S. Miller63-8496/+10241
Tomer Tayar says: ==================== qed*: Advance to FW 8.33.1.0 This series advances all qed* drivers to use firmware 8.33.1.0 which brings new capabilities and initial support of new HW. The changes are mostly in qed, and include changes in the FW interface files, as well as updating the FW initialization and debug collection code. The protocol drivers have minor functional changes for this firmware. Patch 1 Rearranges and refactors the FW interface files in preparation of the new FW (no functional change). Patch 2 Prepares the code for support of new HW (no functional change). Patch 3 Actual utilization of the new FW. Patch 4 Advances drivers' version. v3->v4: Fix a compilation issue which was reported by krobot (dependency on CRC8). v2->v3: Resend the series with a fixed title in the cover letter. v1->v2: - Break the previous single patch into several patches. - Fix compilation issues which were reported by krobot. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02qed*: Advance drivers' version to 8.33.0.20Tomer Tayar4-15/+15
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com> Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02qed*: Utilize FW 8.33.1.0Tomer Tayar45-1679/+2977
Advance the qed* drivers to use firmware 8.33.1.0: Modify core driver (qed) to utilize the new FW and initialize the device with it. This is the lion's share of the patch, and includes changes to FW interface files, device initialization flows, FW interaction flows, and debug collection flows. Modify Ethernet driver (qede) to make use of new FW in fastpath. Modify RoCE/iWARP driver (qedr) to make use of new FW in fastpath. Modify FCoE driver (qedf) to make use of new FW in fastpath. Modify iSCSI driver (qedi) to make use of new FW in fastpath. Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Bason <Yuval.Bason@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Manish Chopra <Manish.Chopra@cavium.com> Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com> Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02qed*: HSI renaming for different types of HWTomer Tayar28-4393/+4399
This patch renames defines and structures in the FW HSI files to allow a distinction between different types of HW. Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com> Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02qed*: Refactoring and rearranging FW API with no functional impactTomer Tayar20-5916/+6357
This patch refactors and reorders the FW API files in preparation of upgrading the code to support new FW. - Make use of the BIT macro in appropriate places. - Whitespace changes to align values and code blocks. - Comments are updated (spelling mistakes, removed if not clear). - Group together code blocks which are related or deal with similar matters. Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02inet_diag: Add equal-operator for portsKristian Evensen2-0/+10
inet_diag currently provides less/greater than or equal operators for comparing ports when filtering sockets. An equal comparison can be performed by combining the two existing operators, or a user can for example request a port range and then do the final filtering in userspace. However, these approaches both have drawbacks. Implementing equal using LE/GE causes the size and complexity of a filter to grow quickly as the number of ports increase, while it on busy machines would be great if the kernel only returns information about relevant sockets. This patch introduces source and destination port equal operators. INET_DIAG_BC_S_EQ is used to match a source port, INET_DIAG_BC_D_EQ a destination port, and usage is the same as for the existing port operators. I.e., the port to match is stored in the no-member of the next inet_diag_bc_op-struct in the filter. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02Merge branch 's390-next'David S. Miller5-101/+179
Julian Wiedmann says: ==================== s390/qeth: updates 2017-12-27 please apply some post-christmas leftovers for 4.16. Two patches to improve IP address management on L3, and two that add support to auto-config the transport mode on z/VM VNICs. Note that one patch in the series touches arch/s390 (acked by Martin). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02s390/qeth: support early setup for z/VM NICsJulian Wiedmann1-9/+77
The transport mode that a z/VM NIC is configured in, must match the hypervisor-internal network which the NIC is coupled to. To get this right automatically, have qeth issue a diag26c hypervisor call that provides all sorts of information for a specific VNIC. With z/VM update VM65918, this also includes the VNIC's required transport mode. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02s390/diag: add diag26c support for VNIC infoJulian Wiedmann1-1/+43
With subcode 0x24, diag26c returns all sorts of VNIC-related information. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02s390/qeth: use common helper to display rxip/vipaJulian Wiedmann1-66/+24
By parameterising the address type, we need just one helper that walks the IP table and builds up the response string. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02s390/qeth: improve error reporting on IP add/removalJulian Wiedmann3-25/+35
When adding & removing IP entries for rxip/vipa/ipato/hsuid, forward any resulting errors back to the sysfs-level caller. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02openvswitch: drop unneeded newlineJulia Lawall1-2/+2
OVS_NLERR prints a newline at the end of the message string, so the message string does not need to include a newline explicitly. Done using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: dccp: drop unneeded newlineJulia Lawall1-1/+1
DCCP_CRIT prints some other text and then a newline after the message string, so the message string does not need to include a newline explicitly. Done using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: sched: fix skb leak in dev_requeue_skb()Wei Yongjun1-8/+21
When dev_requeue_skb() is called with bulked skb list, only the first skb of the list will be requeued to qdisc layer, and leak the others without free them. TCP is broken due to skb leak since no free skb will be considered as still in the host queue and never be retransmitted. This happend when dev_requeue_skb() called from qdisc_restart(). qdisc_restart |-- dequeue_skb |-- sch_direct_xmit() |-- dev_requeue_skb() <-- skb may bluked Fix dev_requeue_skb() to requeue the full bluked list. Also change to use __skb_queue_tail() in __dev_requeue_skb() to avoid skb out of order. Fixes: a53851e2c321 ("net: sched: explicit locking in gso_cpu fallback") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02cxgb4: use CLIP with LIP6 on T6 for TCAM filtersGanesh Goudar1-1/+11
On T6, LIP compression is always enabled for IPv6 and uncompressed IPv6 for LIP is not supported. So, for IPv6 TCAM filters on T6, add LIP6 to CLIP on filter creation, and release the same on filter deletion. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 12:15:57 +0000