summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-07-09KVM: arm/arm64: Stop using the kernel's {pmd,pud,pgd}_populate helpersMarc Zyngier3-4/+32
The {pmd,pud,pgd}_populate accessors usage have always been a bit weird in KVM. We don't have a struct mm to pass (and neither does the kernel most of the time, but still...), and the 32bit code has all kind of cache maintenance that doesn't make sense on ARMv7+ when MP extensions are mandatory (which is the case when the VEs are present). Let's bite the bullet and provide our own implementations. The only bit of architectural code left has to do with building the table entry itself (arm64 having up to 52bit PA, arm lacking PUD level). Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-07-09KVM: arm/arm64: Consolidate page-table accessorsMarc Zyngier3-15/+12
The arm and arm64 KVM page tables accessors are pointlessly different between the two architectures, and likely both wrong one way or another: arm64 lacks a dsb(), and arm doesn't use WRITE_ONCE. Let's unify them. Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-07-09arm64: KVM: Avoid marking pages as XN in Stage-2 if CTR_EL0.DIC is setMarc Zyngier1-2/+12
On systems where CTR_EL0.DIC is set, we don't need to perform icache invalidation to guarantee that we'll fetch the right instruction stream. This also means that taking a permission fault to invalidate the icache is an unnecessary overhead. On such systems, we can safely leave the page as being executable. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-07-09arm64: KVM: Handle Set/Way CMOs as NOPs if FWB is presentMarc Zyngier1-1/+10
Set/Way handling is one of the ugliest corners of KVM. We shouldn't have to handle that, but better safe than sorry. Thankfully, FWB fixes this for us by not requiering any maintenance (the guest is forced to use cacheable memory, no matter what it says, and the whole system is garanteed to be cache coherent), which means we don't have to emulate S/W CMOs, and don't have to track VM ops either. We still have to trap S/W though, if only to prevent the guest from doing something bad. Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-07-09arm64: KVM: Add support for Stage-2 control of memory types and cacheabilityMarc Zyngier9-9/+70
Up to ARMv8.3, the combinaison of Stage-1 and Stage-2 attributes results in the strongest attribute of the two stages. This means that the hypervisor has to perform quite a lot of cache maintenance just in case the guest has some non-cacheable mappings around. ARMv8.4 solves this problem by offering a different mode (FWB) where Stage-2 has total control over the memory attribute (this is limited to systems where both I/O and instruction fetches are coherent with the dcache). This is achieved by having a different set of memory attributes in the page tables, and a new bit set in HCR_EL2. On such a system, we can then safely sidestep any form of dcache management. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-07-08Linux 4.18-rc4v4.18-rc4Linus Torvalds1-1/+1
2018-07-08Merge tag 'armsoc-fixes' of ↵Linus Torvalds8-7/+16
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A small collection of fixes, sort of the usual at this point, all for i.MX or OMAP: - Enable ULPI drivers on i.MX to avoid a hang - Pinctrl fix for touchscreen on i.MX51 ZII RDU1 - Fixes for ethernet clock references on am3517 - mmc0 write protect detection fix for am335x - kzalloc->kcalloc conversion in an OMAP driver - USB metastability fix for USB on dra7 - Fix touchscreen wakeup on am437x" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: imx_v4_v5_defconfig: Select ULPI support ARM: imx_v6_v7_defconfig: Select ULPI support ARM: dts: omap3: Fix am3517 mdio and emac clock references ARM: dts: am335x-bone-common: Fix mmc0 Write Protect bus: ti-sysc: Use 2-factor allocator arguments ARM: dts: dra7: Disable metastability workaround for USB2 ARM: dts: imx51-zii-rdu1: fix touchscreen pinctrl ARM: dts: am437x: make edt-ft5x06 a wakeup source
2018-07-08Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds2-4/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/pti updates from Thomas Gleixner: "Two small fixes correcting the handling of SSB mitigations on AMD processors" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/bugs: Fix the AMD SSBD usage of the SPEC_CTRL MSR x86/bugs: Update when to check for the LS_CFG SSBD mitigation
2018-07-08Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds10-11/+129
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: - Prevent an out-of-bounds access in mtrr_write() - Break a circular dependency in the new hyperv IPI acceleration code - Address the build breakage related to inline functions by enforcing gnu_inline and explicitly bringing native_save_fl() out of line, which also adds a set of _ARM_ARG macros which provide 32/64bit safety. - Initialize the shadow CR4 per cpu variable before using it. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mtrr: Don't copy out-of-bounds data in mtrr_write x86/hyper-v: Fix the circular dependency in IPI enlightenment x86/paravirt: Make native_save_fl() extern inline x86/asm: Add _ASM_ARG* constants for argument registers to <asm/asm.h> compiler-gcc.h: Add __attribute__((gnu_inline)) to all inline declarations x86/mm/32: Initialize the CR4 shadow before __flush_tlb_all()
2018-07-08Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds8-75/+99
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: - The hopefully final fix for the reported race problems in kthread_parkme(). The previous attempt still left a hole and was partially wrong. - Plug a race in the remote tick mechanism which triggers a warning about updates not being done correctly. That's a false positive if the race condition is hit as the remote CPU is idle. Plug it by checking the condition again when holding run queue lock. - Fix a bug in the utilization estimation of a run queue which causes the estimation to be 0 when a run queue is throttled. - Advance the global expiration of the period timer when the timer is restarted after a idle period. Otherwise the expiry time is stale and the timer fires prematurely. - Cure the drift between the bandwidth timer and the runqueue accounting, which leads to bogus throttling of runqueues - Place the call to cpufreq_update_util() correctly so the function will observe the correct number of running RT tasks and not a stale one. * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kthread, sched/core: Fix kthread_parkme() (again...) sched/util_est: Fix util_est_dequeue() for throttled cfs_rq sched/fair: Advance global expiration when period timer is restarted sched/fair: Fix bandwidth timer clock drift condition sched/rt: Fix call to cpufreq_update_util() sched/nohz: Skip remote tick on idle task entirely
2018-07-08Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds1-13/+28
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Thomas Gleixner: "A single fix for objtool to address a bug in handling the cold subfunction detection for aliased functions which was added recently. The bug causes objtool to enter an infinite loop" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Support GCC 8 '-fnoreorder-functions'
2018-07-08Merge branch 'linus' of ↵Linus Torvalds7-2/+10
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - add missing RETs in x86 aegis/morus - fix build error in arm speck * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: x86 - Add missing RETs crypto: arm/speck - fix building in Thumb2 mode
2018-07-08Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds11-96/+155
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 bugfixes from Ted Ts'o: "Bug fixes for ext4; most of which relate to vulnerabilities where a maliciously crafted file system image can result in a kernel OOPS or hang. At least one fix addresses an inline data bug could be triggered by userspace without the need of a crafted file system (although it does require that the inline data feature be enabled)" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: check superblock mapped prior to committing ext4: add more mount time checks of the superblock ext4: add more inode number paranoia checks ext4: avoid running out of journal credits when appending to an inline file jbd2: don't mark block as modified if the handle is out of credits ext4: never move the system.data xattr out of the inode body ext4: clear i_data in ext4_inode_info when removing inline data ext4: include the illegal physical block in the bad map ext4_error msg ext4: verify the depth of extent tree in ext4_find_extent() ext4: only look at the bg_flags field if it is valid ext4: make sure bitmaps and the inode table don't overlap with bg descriptors ext4: always check block group bounds in ext4_init_block_bitmap() ext4: always verify the magic number in xattr blocks ext4: add corruption check in ext4_xattr_set_entry() ext4: add warn_on_error mount option
2018-07-08Merge tag 'pci-v4.18-fixes-2' of ↵Linus Torvalds10-12/+41
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Fix a use-after-free in the endpoint code (Dan Carpenter) - Stop defaulting CONFIG_PCIE_DW_PLAT_HOST to yes (Geert Uytterhoeven) - Fix an nfp regression caused by a change in how we limit the number of VFs we can enable (Jakub Kicinski) - Fix failure path cleanup issues in the new R-Car gen3 PHY support (Marek Vasut) - Fix leaks of OF nodes in faraday, xilinx-nwl, xilinx (Nicholas Mc Guire) * tag 'pci-v4.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: nfp: stop limiting VFs to 0 PCI/IOV: Reset total_VFs limit after detaching PF driver PCI: faraday: Add missing of_node_put() PCI: xilinx-nwl: Add missing of_node_put() PCI: xilinx: Add missing of_node_put() PCI: endpoint: Use after free in pci_epf_unregister_driver() PCI: controller: dwc: Do not let PCIE_DW_PLAT_HOST default to yes PCI: rcar: Clean up PHY init on failure PCI: rcar: Shut the PHY down in failpath
2018-07-07Merge tag '4.18-rc3-smb3fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds14-54/+132
Pull cifs fixes from Steve French: "Five smb3/cifs fixes for stable (including for some leaks and memory overwrites) and also a few fixes for recent regressions in packet signing. Additional testing at the recent SMB3 test event, and some good work by Paulo and others spotted the issues fixed here. In addition to my xfstest runs on these, Aurelien and Stefano did additional test runs to verify this set" * tag '4.18-rc3-smb3fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix stack out-of-bounds in smb{2,3}_create_lease_buf() cifs: Fix infinite loop when using hard mount option cifs: Fix slab-out-of-bounds in send_set_info() on SMB2 ACE setting cifs: Fix memory leak in smb2_set_ea() cifs: fix SMB1 breakage cifs: Fix validation of signed data in smb2 cifs: Fix validation of signed data in smb3+ cifs: Fix use after free of a mid_q_entry
2018-07-07Merge tag 'dma-mapping-4.18-3' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds2-17/+46
Pull dma-mapping fix from Christoph Hellwig: "Revert an incorrect dma-mapping commit for 4.18-rc" * tag 'dma-mapping-4.18-3' of git://git.infradead.org/users/hch/dma-mapping: Revert "iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up intel_{alloc,free}_coherent()"
2018-07-07Merge tag 'dmaengine-fix-4.18-rc4' of ↵Linus Torvalds4-4/+8
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "We have few odd driver fixes and one email update change for you this time: - Driver fixes for k3dma (off by one), pl330 (burst residue granularity) and omap-dma (incorrect residue_granularity) - Sinan's email update" * tag 'dmaengine-fix-4.18-rc4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: k3dma: Off by one in k3_of_dma_simple_xlate() dmaengine: pl330: report BURST residue granularity MAINTAINERS: Update email-id of Sinan Kaya dmaengine: ti: omap-dma: Fix OMAP1510 incorrect residue_granularity
2018-07-07Merge tag 'for-linus-4.18-2' of git://github.com/cminyard/linux-ipmiLinus Torvalds2-23/+14
Pull IPMI fixes from Corey Minyard: "A couple of small fixes: one to the BMC side of things that fixes an interrupt issue, and one oops fix if init fails in a certain way on the client driver" * tag 'for-linus-4.18-2' of git://github.com/cminyard/linux-ipmi: ipmi: kcs_bmc: fix IRQ exception if the channel is not open ipmi: Cleanup oops on initialization failure
2018-07-07Merge tag 'arm64-fixes' of ↵Linus Torvalds1-5/+3
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 LDFLAGS clean-up from Catalin Marinas: - use aarch64elf instead of aarch64linux - move endianness options to LDFLAGS instead from LD - remove no-op '-p' linker flag * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: remove no-op -p linker flag arm64: add endianness option to LDFLAGS instead of LD arm64: Use aarch64elf and aarch64elfb emulation mode variants
2018-07-07x86/mtrr: Don't copy out-of-bounds data in mtrr_writeJann Horn1-1/+2
Don't access the provided buffer out of bounds - this can cause a kernel out-of-bounds read when invoked through sys_splice() or other things that use kernel_write()/__kernel_write(). Fixes: 7f8ec5a4f01a ("x86/mtrr: Convert to use strncpy_from_user() helper") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180706215003.156702-1-jannh@google.com
2018-07-06Merge tag 'scsi-fixes' of ↵Linus Torvalds3-15/+57
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is two minor bug fixes (aacraid, target) and a fix for a potential exploit in the way sg handles teardown" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sg: mitigate read/write abuse scsi: aacraid: Fix PD performance regression over incorrect qd being set scsi: target: Fix truncated PR-in ReadKeys response
2018-07-06Merge tag 'for-linus-20180706' of git://git.kernel.dk/linux-blockLinus Torvalds2-1/+2
Pull block fixes from Jens Axboe: "Two minor fixes for this series: - add LOOP_SET_BLOCK_SIZE as compat ioctl (Evan Green) - drbd use-after-free fix (Lars Ellenberg)" * tag 'for-linus-20180706' of git://git.kernel.dk/linux-block: loop: Add LOOP_SET_BLOCK_SIZE in compat ioctl drbd: fix access after free
2018-07-06Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds5-48/+37
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "The usual collection of driver fixlets: - build cleanup/fix for the sunxi makefile that tried to save size but failed and prevented dead code elimination from working - two Davinci clk driver fixes for a typo causing build failures in different configurations and an error check that checks the wrong variable. - undo the DT ABI breaking imx6ul binding header shuffle that got merged this cycle" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: dt-bindings: clock: imx6ul: Do not change the clock definition order clk: davinci: fix a typo (which leads to build failures) clk: davinci: cfgchip: testing the wrong variable clk: sunxi-ng: replace lib-y with obj-y
2018-07-06Merge tag 'vfio-v4.18-rc4' of git://github.com/awilliam/linux-vfioLinus Torvalds3-22/+25
Pull VFIO fixes from Alex Williamson: - Make vfio-pci IGD extensions optional via Kconfig (Alex Williamson) - Remove unused and soon to be removed map_atomic callback from mbochs sample driver, add unmap callback to avoid dmabuf leaks (Gerd Hoffmann) - Fix usage of get_user_pages_longterm() (Jason Gunthorpe) - Fix sample mbochs driver vm_operations_struct.fault return type (Souptick Joarder) * tag 'vfio-v4.18-rc4' of git://github.com/awilliam/linux-vfio: sample/vfio-mdev: Change return type to vm_fault_t vfio: Use get_user_pages_longterm correctly sample/mdev/mbochs: add mbochs_kunmap_dmabuf sample/mdev/mbochs: remove mbochs_kmap_atomic_dmabuf vfio/pci: Make IGD support a configurable option
2018-07-06Merge branch 'for-linus' of ↵Linus Torvalds8-13/+27
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "A few more changes for v4.18: - wire up the two new system calls io_pgetevents and rseq - fix a register corruption in the expolines code for machines without EXRL - drastically reduce the memory utilization of the dasd driver - fix reference counting for KVM page table pages" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: wire up rseq system call s390: wire up io_pgetevents system call s390/mm: fix refcount usage for 4K pgste s390/dasd: reduce the default queue depth and nr of hardware queues s390: Correct register corruption in critical section cleanup
2018-07-06x86/hyper-v: Fix the circular dependency in IPI enlightenmentK. Y. Srinivasan3-2/+13
The IPI hypercalls depend on being able to map the Linux notion of CPU ID to the hypervisor's notion of the CPU ID. The array hv_vp_index[] provides this mapping. Code for populating this array depends on the IPI functionality. Break this circular dependency. [ tglx: Use a proper define instead of '-1' with a u32 variable as pointed out by Vitaly ] Fixes: 68bb7bfb7985 ("X86/Hyper-V: Enable IPI enlightenments") Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Kelley <mikelley@microsoft.com> Cc: gregkh@linuxfoundation.org Cc: devel@linuxdriverproject.org Cc: olaf@aepfle.de Cc: apw@canonical.com Cc: jasowang@redhat.com Cc: hpa@zytor.com Cc: sthemmin@microsoft.com Cc: Michael.H.Kelley@microsoft.com Cc: vkuznets@redhat.com Link: https://lkml.kernel.org/r/20180703230155.15160-1-kys@linuxonhyperv.com
2018-07-05Merge tag 'drm-fixes-2018-07-06' of git://anongit.freedesktop.org/drm/drmLinus Torvalds34-242/+583
Pull drm fixes from Dave Airlie: "This is the drm fixes for rc4. It's a bit larger than I'd like but the exynos cleanups are pretty mechanical, and I'd rather have them in sooner rather than later so we can avoid too much conflicts around them. The non-mechanincal exynos changes are mostly fixes for new feature recently introduced. Apart from the exynos updates, we have: i915: - GVT and GGTT mapping fixes amdgpu: - fix HDMI2.0 4K@60 Hz regression - Hotplug fixes for dual-GPU laptops to make power management better - misc vega12 bios fixes, a race fix and some typos. sii8620 bridge: - small fixes around mode setting core: - use kvzalloc to allocate blob property memory" * tag 'drm-fixes-2018-07-06' of git://anongit.freedesktop.org/drm/drm: (34 commits) drm/amd/display: add a check for display depth validity drm/amd/display: adding ycbcr420 pixel encoding for hdmi drm/udl: fix display corruption of the last line drm/bridge/sii8620: Fix link mode selection drm/bridge/sii8620: Fix display of packed pixel modes drm/bridge/sii8620: Send AVI infoframe in all MHL versions drm/amdgpu: fix user fence write race condition drm/i915: Try GGTT mmapping whole object as partial drm/amdgpu/pm: fix display count in non-DC path drm/amdgpu: fix swapped emit_ib_size in vce3 drm: Use kvzalloc for allocating blob property memory drm/i915/gvt: changed DDI mode emulation type drm/i915/gvt: fix a bug of partially write ggtt enties drm/exynos: Replace drm_dev_unref with drm_dev_put drm/exynos: Replace drm_gem_object_unreference_unlocked with put function drm/exynos: Replace drm_framebuffer_{un/reference} with put,get functions drm/exynos: ipp: use correct enum type drm/exynos: decon5433: Fix WINCONx reset value drm/exynos: decon5433: Fix per-plane global alpha for XRGB modes drm/exynos: fimc: Use real buffer width for configuring the hardware ...
2018-07-05Merge tag 'trace-v4.18-rc3' of ↵Linus Torvalds7-19/+17
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes and cleanups from Steven Rostedt: "While cleaning out my INBOX, I found a few patches that were lost in the noise. These are minor bug fixes and clean ups. Those include: - avoid a string overflow - code that didn't match the comment (but should) - a small code optimization (use of a conditional) - quiet printf warnings - nuke unused code - fix function graph interrupt annotation" * tag 'trace-v4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix missing return symbol in function_graph output ftrace: Nuke clear_ftrace_function tracing: Use __printf markup to silence compiler tracing: Optimize trace_buffer_iter() logic tracing: Make create_filter() code match the comments tracing: Avoid string overflow
2018-07-06Merge tag 'exynos-drm-fixes-for-v4.18-rc4' of ↵Dave Airlie11-102/+149
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Fixups - Fix several problems to IPPv2 merged to mainline recentely. . An align problem of width size that IPP driver incorrectly calculated the real buffer size. . Horizontal and vertical flip problem. . Per-plane global alpha for XRGB modes. . Incorrect variant of the YUV modes. - Fix plane overlapping problem. . The stange order of overlapping planes on XRGB modes by setting global alpha value to maximum value. Cleanup - Rename a enum type, drm_ipp_size_id, to one specific to Exynos, drm_exynos_ipp_limit_type. - Replace {un/reference} with {put,get} functions. . it replaces several reference/unreference functions with Linux kernel nameing standard. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1530512041-21392-1-git-send-email-inki.dae@samsung.com
2018-07-06Merge branch 'drm-fixes-4.18' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie14-86/+284
into drm-fixes - Fix an HDMI 2.0 4k@60 regression - Hotplug fixes for PX/HG laptops - Fixes for vbios changes in vega12 - Fix a race in the user fence code - Fix a couple of misc typos Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180705155206.2752-1-alexander.deucher@amd.com
2018-07-06Merge tag 'drm-intel-fixes-2018-07-05' of ↵Dave Airlie5-15/+81
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes A couple of GVT fixes, and a GGTT mmapping fix. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/8736wxq35t.fsf@intel.com
2018-07-06Merge tag 'drm-misc-fixes-2018-07-05' of ↵Dave Airlie2-34/+58
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for v4.18-rc4: - A few small fixes for the sii8620 bridge. - Allocate blob property memory using kvzalloc instead of kmalloc. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/4267636e-bb7c-8f69-eeff-12e045b3e7e1@linux.intel.com
2018-07-05Merge tag 'omap-for-v4.18/fixes-signed' of ↵Olof Johansson5-6/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omap for v4.18-rc cycle Few dts fixes for regressions for various SoCs and devices for touchscreen wake, dra7 USB quirk, pinmux for beaglebone mmc, and emac clock. Also included is a change for ti-sysc to use kcalloc that Kees wanted to get into v4.18 as that's the last one he wanted to fix for improved defense against allocation overflows. * tag 'omap-for-v4.18/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap3: Fix am3517 mdio and emac clock references ARM: dts: am335x-bone-common: Fix mmc0 Write Protect bus: ti-sysc: Use 2-factor allocator arguments ARM: dts: dra7: Disable metastability workaround for USB2 ARM: dts: am437x: make edt-ft5x06 a wakeup source Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-05Fix up non-directory creation in SGID directoriesLinus Torvalds1-0/+6
sgid directories have special semantics, making newly created files in the directory belong to the group of the directory, and newly created subdirectories will also become sgid. This is historically used for group-shared directories. But group directories writable by non-group members should not imply that such non-group members can magically join the group, so make sure to clear the sgid bit on non-directories for non-members (but remember that sgid without group execute means "mandatory locking", just to confuse things even more). Reported-by: Jann Horn <jannh@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-05Revert "iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up ↵Christoph Hellwig2-17/+46
intel_{alloc,free}_coherent()" This commit may cause a less than required dma mask to be used for some allocations, which apparently leads to module load failures for iwlwifi sometimes. This reverts commit d657c5c73ca987214a6f9436e435b34fc60f332a. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Fabio Coatti <fabio.coatti@gmail.com> Tested-by: Fabio Coatti <fabio.coatti@gmail.com>
2018-07-05cifs: Fix stack out-of-bounds in smb{2,3}_create_lease_buf()Stefano Brivio5-21/+14
smb{2,3}_create_lease_buf() store a lease key in the lease context for later usage on a lease break. In most paths, the key is currently sourced from data that happens to be on the stack near local variables for oplock in SMB2_open() callers, e.g. from open_shroot(), whereas smb2_open_file() properly allocates space on its stack for it. The address of those local variables holding the oplock is then passed to create_lease_buf handlers via SMB2_open(), and 16 bytes near oplock are used. This causes a stack out-of-bounds access as reported by KASAN on SMB2.1 and SMB3 mounts (first out-of-bounds access is shown here): [ 111.528823] BUG: KASAN: stack-out-of-bounds in smb3_create_lease_buf+0x399/0x3b0 [cifs] [ 111.530815] Read of size 8 at addr ffff88010829f249 by task mount.cifs/985 [ 111.532838] CPU: 3 PID: 985 Comm: mount.cifs Not tainted 4.18.0-rc3+ #91 [ 111.534656] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 111.536838] Call Trace: [ 111.537528] dump_stack+0xc2/0x16b [ 111.540890] print_address_description+0x6a/0x270 [ 111.542185] kasan_report+0x258/0x380 [ 111.544701] smb3_create_lease_buf+0x399/0x3b0 [cifs] [ 111.546134] SMB2_open+0x1ef8/0x4b70 [cifs] [ 111.575883] open_shroot+0x339/0x550 [cifs] [ 111.591969] smb3_qfs_tcon+0x32c/0x1e60 [cifs] [ 111.617405] cifs_mount+0x4f3/0x2fc0 [cifs] [ 111.674332] cifs_smb3_do_mount+0x263/0xf10 [cifs] [ 111.677915] mount_fs+0x55/0x2b0 [ 111.679504] vfs_kern_mount.part.22+0xaa/0x430 [ 111.684511] do_mount+0xc40/0x2660 [ 111.698301] ksys_mount+0x80/0xd0 [ 111.701541] do_syscall_64+0x14e/0x4b0 [ 111.711807] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 111.713665] RIP: 0033:0x7f372385b5fa [ 111.715311] Code: 48 8b 0d 99 78 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 66 78 2c 00 f7 d8 64 89 01 48 [ 111.720330] RSP: 002b:00007ffff27049d8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 111.722601] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f372385b5fa [ 111.724842] RDX: 000055c2ecdc73b2 RSI: 000055c2ecdc73f9 RDI: 00007ffff270580f [ 111.727083] RBP: 00007ffff2705804 R08: 000055c2ee976060 R09: 0000000000001000 [ 111.729319] R10: 0000000000000000 R11: 0000000000000206 R12: 00007f3723f4d000 [ 111.731615] R13: 000055c2ee976060 R14: 00007f3723f4f90f R15: 0000000000000000 [ 111.735448] The buggy address belongs to the page: [ 111.737420] page:ffffea000420a7c0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 111.739890] flags: 0x17ffffc0000000() [ 111.741750] raw: 0017ffffc0000000 0000000000000000 dead000000000200 0000000000000000 [ 111.744216] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 111.746679] page dumped because: kasan: bad access detected [ 111.750482] Memory state around the buggy address: [ 111.752562] ffff88010829f100: 00 f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 00 [ 111.754991] ffff88010829f180: 00 00 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 [ 111.757401] >ffff88010829f200: 00 00 00 00 00 f1 f1 f1 f1 01 f2 f2 f2 f2 f2 f2 [ 111.759801] ^ [ 111.762034] ffff88010829f280: f2 02 f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 [ 111.764486] ffff88010829f300: f2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 111.766913] ================================================================== Lease keys are however already generated and stored in fid data on open and create paths: pass them down to the lease context creation handlers and use them. Suggested-by: Aurélien Aptel <aaptel@suse.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Fixes: b8c32dbb0deb ("CIFS: Request SMB2.1 leases") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-07-05cifs: Fix infinite loop when using hard mount optionPaulo Alcantara2-8/+20
For every request we send, whether it is SMB1 or SMB2+, we attempt to reconnect tcon (cifs_reconnect_tcon or smb2_reconnect) before carrying out the request. So, while server->tcpStatus != CifsNeedReconnect, we wait for the reconnection to succeed on wait_event_interruptible_timeout(). If it returns, that means that either the condition was evaluated to true, or timeout elapsed, or it was interrupted by a signal. Since we're not handling the case where the process woke up due to a received signal (-ERESTARTSYS), the next call to wait_event_interruptible_timeout() will _always_ fail and we end up looping forever inside either cifs_reconnect_tcon() or smb2_reconnect(). Here's an example of how to trigger that: $ mount.cifs //foo/share /mnt/test -o username=foo,password=foo,vers=1.0,hard (break connection to server before executing bellow cmd) $ stat -f /mnt/test & sleep 140 [1] 2511 $ ps -aux -q 2511 USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 2511 0.0 0.0 12892 1008 pts/0 S 12:24 0:00 stat -f /mnt/test $ kill -9 2511 (wait for a while; process is stuck in the kernel) $ ps -aux -q 2511 USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 2511 83.2 0.0 12892 1008 pts/0 R 12:24 30:01 stat -f /mnt/test By using 'hard' mount point means that cifs.ko will keep retrying indefinitely, however we must allow the process to be killed otherwise it would hang the system. Signed-off-by: Paulo Alcantara <palcantara@suse.de> Cc: stable@vger.kernel.org Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-07-05cifs: Fix slab-out-of-bounds in send_set_info() on SMB2 ACE settingStefano Brivio1-2/+5
A "small" CIFS buffer is not big enough in general to hold a setacl request for SMB2, and we end up overflowing the buffer in send_set_info(). For instance: # mount.cifs //127.0.0.1/test /mnt/test -o username=test,password=test,nounix,cifsacl # touch /mnt/test/acltest # getcifsacl /mnt/test/acltest REVISION:0x1 CONTROL:0x9004 OWNER:S-1-5-21-2926364953-924364008-418108241-1000 GROUP:S-1-22-2-1001 ACL:S-1-5-21-2926364953-924364008-418108241-1000:ALLOWED/0x0/0x1e01ff ACL:S-1-22-2-1001:ALLOWED/0x0/R ACL:S-1-22-2-1001:ALLOWED/0x0/R ACL:S-1-5-21-2926364953-924364008-418108241-1000:ALLOWED/0x0/0x1e01ff ACL:S-1-1-0:ALLOWED/0x0/R # setcifsacl -a "ACL:S-1-22-2-1004:ALLOWED/0x0/R" /mnt/test/acltest this setacl will cause the following KASAN splat: [ 330.777927] BUG: KASAN: slab-out-of-bounds in send_set_info+0x4dd/0xc20 [cifs] [ 330.779696] Write of size 696 at addr ffff88010d5e2860 by task setcifsacl/1012 [ 330.781882] CPU: 1 PID: 1012 Comm: setcifsacl Not tainted 4.18.0-rc2+ #2 [ 330.783140] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 330.784395] Call Trace: [ 330.784789] dump_stack+0xc2/0x16b [ 330.786777] print_address_description+0x6a/0x270 [ 330.787520] kasan_report+0x258/0x380 [ 330.788845] memcpy+0x34/0x50 [ 330.789369] send_set_info+0x4dd/0xc20 [cifs] [ 330.799511] SMB2_set_acl+0x76/0xa0 [cifs] [ 330.801395] set_smb2_acl+0x7ac/0xf30 [cifs] [ 330.830888] cifs_xattr_set+0x963/0xe40 [cifs] [ 330.840367] __vfs_setxattr+0x84/0xb0 [ 330.842060] __vfs_setxattr_noperm+0xe6/0x370 [ 330.843848] vfs_setxattr+0xc2/0xd0 [ 330.845519] setxattr+0x258/0x320 [ 330.859211] path_setxattr+0x15b/0x1b0 [ 330.864392] __x64_sys_setxattr+0xc0/0x160 [ 330.866133] do_syscall_64+0x14e/0x4b0 [ 330.876631] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 330.878503] RIP: 0033:0x7ff2e507db0a [ 330.880151] Code: 48 8b 0d 89 93 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 bc 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 56 93 2c 00 f7 d8 64 89 01 48 [ 330.885358] RSP: 002b:00007ffdc4903c18 EFLAGS: 00000246 ORIG_RAX: 00000000000000bc [ 330.887733] RAX: ffffffffffffffda RBX: 000055d1170de140 RCX: 00007ff2e507db0a [ 330.890067] RDX: 000055d1170de7d0 RSI: 000055d115b39184 RDI: 00007ffdc4904818 [ 330.892410] RBP: 0000000000000001 R08: 0000000000000000 R09: 000055d1170de7e4 [ 330.894785] R10: 00000000000002b8 R11: 0000000000000246 R12: 0000000000000007 [ 330.897148] R13: 000055d1170de0c0 R14: 0000000000000008 R15: 000055d1170de550 [ 330.901057] Allocated by task 1012: [ 330.902888] kasan_kmalloc+0xa0/0xd0 [ 330.904714] kmem_cache_alloc+0xc8/0x1d0 [ 330.906615] mempool_alloc+0x11e/0x380 [ 330.908496] cifs_small_buf_get+0x35/0x60 [cifs] [ 330.910510] smb2_plain_req_init+0x4a/0xd60 [cifs] [ 330.912551] send_set_info+0x198/0xc20 [cifs] [ 330.914535] SMB2_set_acl+0x76/0xa0 [cifs] [ 330.916465] set_smb2_acl+0x7ac/0xf30 [cifs] [ 330.918453] cifs_xattr_set+0x963/0xe40 [cifs] [ 330.920426] __vfs_setxattr+0x84/0xb0 [ 330.922284] __vfs_setxattr_noperm+0xe6/0x370 [ 330.924213] vfs_setxattr+0xc2/0xd0 [ 330.926008] setxattr+0x258/0x320 [ 330.927762] path_setxattr+0x15b/0x1b0 [ 330.929592] __x64_sys_setxattr+0xc0/0x160 [ 330.931459] do_syscall_64+0x14e/0x4b0 [ 330.933314] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 330.936843] Freed by task 0: [ 330.938588] (stack is not available) [ 330.941886] The buggy address belongs to the object at ffff88010d5e2800 which belongs to the cache cifs_small_rq of size 448 [ 330.946362] The buggy address is located 96 bytes inside of 448-byte region [ffff88010d5e2800, ffff88010d5e29c0) [ 330.950722] The buggy address belongs to the page: [ 330.952789] page:ffffea0004357880 count:1 mapcount:0 mapping:ffff880108fdca80 index:0x0 compound_mapcount: 0 [ 330.955665] flags: 0x17ffffc0008100(slab|head) [ 330.957760] raw: 0017ffffc0008100 dead000000000100 dead000000000200 ffff880108fdca80 [ 330.960356] raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 [ 330.963005] page dumped because: kasan: bad access detected [ 330.967039] Memory state around the buggy address: [ 330.969255] ffff88010d5e2880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 330.971833] ffff88010d5e2900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 330.974397] >ffff88010d5e2980: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc [ 330.976956] ^ [ 330.979226] ffff88010d5e2a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 330.981755] ffff88010d5e2a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 330.984225] ================================================================== Fix this by allocating a regular CIFS buffer in smb2_plain_req_init() if the request command is SMB2_SET_INFO. Reported-by: Jianhong Yin <jiyin@redhat.com> Fixes: 366ed846df60 ("cifs: Use smb 2 - 3 and cifsacl mount options setacl function") CC: Stable <stable@vger.kernel.org> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-and-tested-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-07-05cifs: Fix memory leak in smb2_set_ea()Paulo Alcantara1-0/+2
This patch fixes a memory leak when doing a setxattr(2) in SMB2+. Signed-off-by: Paulo Alcantara <palcantara@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2018-07-05cifs: fix SMB1 breakageRonnie Sahlberg5-11/+13
SMB1 mounting broke in commit 35e2cc1ba755 ("cifs: Use correct packet length in SMB2_TRANSFORM header") Fix it and also rename smb2_rqst_len to smb_rqst_len to make it less unobvious that the function is also called from CIFS/SMB1 Good job by Paulo reviewing and cleaning up Ronnie's original patch. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Paulo Alcantara <palcantara@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-07-05cifs: Fix validation of signed data in smb2Paulo Alcantara1-4/+24
Fixes: c713c8770fa5 ("cifs: push rfc1002 generation down the stack") We failed to validate signed data returned by the server because __cifs_calc_signature() now expects to sign the actual data in iov but we were also passing down the rfc1002 length. Fix smb3_calc_signature() to calculate signature of rfc1002 length prior to passing only the actual data iov[1-N] to __cifs_calc_signature(). In addition, there are a few cases where no rfc1002 length is passed so we make sure there's one (iov_len == 4). Signed-off-by: Paulo Alcantara <palcantara@suse.de> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-07-05cifs: Fix validation of signed data in smb3+Paulo Alcantara1-6/+25
Fixes: c713c8770fa5 ("cifs: push rfc1002 generation down the stack") We failed to validate signed data returned by the server because __cifs_calc_signature() now expects to sign the actual data in iov but we were also passing down the rfc1002 length. Fix smb3_calc_signature() to calculate signature of rfc1002 length prior to passing only the actual data iov[1-N] to __cifs_calc_signature(). In addition, there are a few cases where no rfc1002 length is passed so we make sure there's one (iov_len == 4). Signed-off-by: Paulo Alcantara <palcantara@suse.de> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-07-05cifs: Fix use after free of a mid_q_entryLars Persson7-2/+29
With protocol version 2.0 mounts we have seen crashes with corrupt mid entries. Either the server->pending_mid_q list becomes corrupt with a cyclic reference in one element or a mid object fetched by the demultiplexer thread becomes overwritten during use. Code review identified a race between the demultiplexer thread and the request issuing thread. The demultiplexer thread seems to be written with the assumption that it is the sole user of the mid object until it calls the mid callback which either wakes the issuer task or deletes the mid. This assumption is not true because the issuer task can be woken up earlier by a signal. If the demultiplexer thread has proceeded as far as setting the mid_state to MID_RESPONSE_RECEIVED then the issuer thread will happily end up calling cifs_delete_mid while the demultiplexer thread still is using the mid object. Inserting a delay in the cifs demultiplexer thread widens the race window and makes reproduction of the race very easy: if (server->large_buf) buf = server->bigbuf; + usleep_range(500, 4000); server->lstrp = jiffies; To resolve this I think the proper solution involves putting a reference count on the mid object. This patch makes sure that the demultiplexer thread holds a reference until it has finished processing the transaction. Cc: stable@vger.kernel.org Signed-off-by: Lars Persson <larper@axis.com> Acked-by: Paulo Alcantara <palcantara@suse.de> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-07-05autofs: rename 'autofs' module back to 'autofs4'Linus Torvalds2-3/+3
It turns out that systemd has a bug: it wants to load the autofs module early because of some initialization ordering with udev, and it doesn't do that correctly. Everywhere else it does the proper "look up module name" that does the proper alias resolution, but in that early code, it just uses a hardcoded "autofs4" for the module name. The result of that is that as of commit a2225d931f75 ("autofs: remove left-over autofs4 stubs"), you get systemd[1]: Failed to insert module 'autofs4': No such file or directory in the system logs, and a lack of module loading. All this despite the fact that we had very clearly marked 'autofs4' as an alias for this module. What's so ridiculous about this is that literally everything else does the module alias handling correctly, including really old versions of systemd (that just used 'modprobe' to do this), and even all the other systemd module loading code. Only that special systemd early module load code is broken, hardcoding the module names for not just 'autofs4', but also "ipv6", "unix", "ip_tables" and "virtio_rng". Very annoying. Instead of creating an _additional_ separate compatibility 'autofs4' module, just rely on the fact that everybody else gets this right, and just call the module 'autofs4' for compatibility reasons, with 'autofs' as the alias name. That will allow the systemd people to fix their bugs, adding the proper alias handling, and maybe even fix the name of the module to be just "autofs" (so that they can _test_ the alias handling). And eventually, we can revert this silly compatibility hack. See also https://github.com/systemd/systemd/issues/9501 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=902946 for the systemd bug reports upstream and in the Debian bug tracker respectively. Fixes: a2225d931f75 ("autofs: remove left-over autofs4 stubs") Reported-by: Ben Hutchings <ben@decadent.org.uk> Reported-by: Michael Biebl <biebl@debian.org> Cc: Ian Kent <raven@themaw.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-05arm64: remove no-op -p linker flagGreg Hackmann1-1/+1
Linking the ARM64 defconfig kernel with LLVM lld fails with the error: ld.lld: error: unknown argument: -p Makefile:1015: recipe for target 'vmlinux' failed Without this flag, the ARM64 defconfig kernel successfully links with lld and boots on Dragonboard 410c. After digging through binutils source and changelogs, it turns out that -p is only relevant to ancient binutils installations targeting 32-bit ARM. binutils accepts -p for AArch64 too, but it's always been undocumented and silently ignored. A comment in ld/emultempl/aarch64elf.em explains that it's "Only here for backwards compatibility". Since this flag is a no-op on ARM64, we can safely drop it. Acked-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-07-05Merge tag 'acpi-4.18-rc4' of ↵Linus Torvalds3-9/+16
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix a recent ACPICA regression, fix a battery driver regression introduced during the 4.17 cycle and fix up the recently added support for the PPTT ACPI table. Specifics: - Revert part of a recent ACPICA regression fix that added leading newlines to ACPICA error messages and made the kernel log look broken (Rafael Wysocki). - Fix an ACPI battery driver regression introduced during the 4.17 cycle due to incorrect error handling that made Thinkpad 13 laptops crash on boot (Jouke Witteveen). - Fix up the recently added PPTT ACPI table support by covering the case when a PPTT structure represents a processors group correctly (Sudeep Holla)" * tag 'acpi-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / battery: Safe unregistering of hooks ACPI / PPTT: use ACPI ID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set ACPICA: Drop leading newlines from error messages
2018-07-05Merge tag 'pm-4.18-rc4' of ↵Linus Torvalds2-7/+21
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a PCI power management regression introduced during the 4.17 cycle and fix up the recently added support for devices in multiple power domains. Specifics: - Resume parallel PCI (non-PCIe) bridges on suspend-to-RAM (ACP S3) to avoid confusing the platform firmware which started to happen after a core power management regression fix that went in during the 4.17 cycle (Rafael Wysocki). - Fix up the recently added support for devices in multiple power domains by avoiding to power up the entire domain unnecessarily when attaching a device to it (Ulf Hansson)" * tag 'pm-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / Domains: Don't power on at attach for the multi PM domain case PCI / ACPI / PM: Resume bridges w/o drivers on suspend-to-RAM
2018-07-05Merge tag 'riscv-for-linus-4.18-rc4' of ↵Linus Torvalds7-25/+24
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V fixes from Palmer Dabbelt: "This contains a handful of fixes for the RISC-V port: - A fix to R_RISCV_ADD32/R_RISCV_SUB32 relocations that allows modules that use these to load correctly. - The removal of of_platform_populate(), which is obselete. - The removal of irq-riscv-intc.h, which is obselete. - A fix to PTRACE_SETREGSET. - Fixes that allow the RV32I kernel to build (at least for Zong, I've got another patch on the mailing list that's necessary on my setup :)). I've just given these a defconfig build test" * tag 'riscv-for-linus-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: RISC-V: Fix PTRACE_SETREGSET bug. RISC-V: Don't include irq-riscv-intc.h riscv: remove unnecessary of_platform_populate call RISC-V: fix R_RISCV_ADD32/R_RISCV_SUB32 relocations RISC-V: Change variable type for 32-bit compatible RISC-V: Add definiion of extract symbol's index and type for 32-bit RISC-V: Select GENERIC_UCMPDI2 on RV32I RISC-V: Add conditional macro for zone of DMA32
2018-07-05Merge branch 'for-linus' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu fix from Greg Ungerer: "A single fix for breakage introduced in this merge window" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: fix "bad page state" oops on ColdFire boot
2018-07-05drm/amd/display: add a check for display depth validityMikita Lipski1-0/+42
[why] HDMI 2.0 fails to validate 4K@60 timing with 10 bpc [how] Adding a helper function that would verify if the display depth assigned would pass a bandwidth validation. Drop the display depth by one level till calculated pixel clk is lower than maximum TMDS clk. Bugzilla: https://bugs.freedesktop.org/106959 Tested-by: Mike Lothian <mike@fireburn.co.uk> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 14:27:12 +0000