summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-07-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller18-94/+480
Alexei Starovoitov says: ==================== pull-request: bpf 2019-07-25 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) fix segfault in libbpf, from Andrii. 2) fix gso_segs access, from Eric. 3) tls/sockmap fixes, from Jakub and John. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-25ipip: validate header length in ipip_tunnel_xmitHaishuang Yan1-0/+3
We need the same checks introduced by commit cb9f1b783850 ("ip: validate header length on virtual device xmit") for ipip tunnel. Fixes: cb9f1b783850b ("ip: validate header length on virtual device xmit") Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-25selftests/net: add missing gitignores (ipv6_flowlabel)Jakub Kicinski1-2/+2
ipv6_flowlabel and ipv6_flowlabel_mgr are missing from gitignore. Quentin points out that the original commit 3fb321fde22d ("selftests/net: ipv6 flowlabel") did add ignore entries, they are just missing the "ipv6_" prefix. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-25bnx2x: Disable multi-cos feature.Sudarsana Reddy Kalluru1-2/+1
Commit 3968d38917eb ("bnx2x: Fix Multi-Cos.") which enabled multi-cos feature after prolonged time in driver added some regression causing numerous issues (sudden reboots, tx timeout etc.) reported by customers. We plan to backout this commit and submit proper fix once we have root cause of issues reported with this feature enabled. Fixes: 3968d38917eb ("bnx2x: Fix Multi-Cos.") Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-25fsl/fman: Remove comment referring to non-existent functionChris Packham1-3/+0
fm_set_max_frm() existed in the Freescale SDK as a callback for an early_param. When this code was ported to the upstream kernel the early_param was converted to a module_param making the reference to the function incorrect. The rest of the comment already does a good job of explaining the parameter so removing the reference to the non-existent function seems like the best thing to do. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-25st_nci_hci_connectivity_event_received: null check the allocationNavid Emamdoost1-0/+2
devm_kzalloc may fail and return NULL. So the null check is needed. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-25st21nfca_connectivity_event_received: null check the allocationNavid Emamdoost1-0/+2
devm_kzalloc may fail and return null. So the null check is needed. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-25tun: mark small packets as owned by the tap sockAlexis Bauvin1-3/+6
- v1 -> v2: Move skb_set_owner_w to __tun_build_skb to reduce patch size Small packets going out of a tap device go through an optimized code path that uses build_skb() rather than sock_alloc_send_pskb(). The latter calls skb_set_owner_w(), but the small packet code path does not. The net effect is that small packets are not owned by the userland application's socket (e.g. QEMU), while large packets are. This can be seen with a TCP session, where packets are not owned when the window size is small enough (around PAGE_SIZE), while they are once the window grows (note that this requires the host to support virtio tso for the guest to offload segmentation). All this leads to inconsistent behaviour in the kernel, especially on netfilter modules that uses sk->socket (e.g. xt_owner). Fixes: 66ccbc9c87c2 ("tap: use build_skb() for small packet") Signed-off-by: Alexis Bauvin <abauvin@scaleway.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-25Merge branch 'dim-fixes'David S. Miller7-63/+63
Leon Romanovsky says: ==================== DIM fixes for 5.3 Those two fixes for recently merged DIM patches, both exposed through RDMa DIM usage. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-25lib/dim: Fix -Wunused-const-variable warningsLeon Romanovsky2-56/+56
DIM causes to the following warnings during kernel compilation which indicates that tx_profile and rx_profile are supposed to be declared in *.c and not in *.h files. In file included from ./include/rdma/ib_verbs.h:64, from ./include/linux/mlx5/device.h:37, from ./include/linux/mlx5/driver.h:51, from ./include/linux/mlx5/vport.h:36, from drivers/infiniband/hw/mlx5/ib_virt.c:34: ./include/linux/dim.h:326:1: warning: _tx_profile_ defined but not used [-Wunused-const-variable=] 326 | tx_profile[DIM_CQ_PERIOD_NUM_MODES][NET_DIM_PARAMS_NUM_PROFILES] = { | ^~~~~~~~~~ ./include/linux/dim.h:320:1: warning: _rx_profile_ defined but not used [-Wunused-const-variable=] 320 | rx_profile[DIM_CQ_PERIOD_NUM_MODES][NET_DIM_PARAMS_NUM_PROFILES] = { | ^~~~~~~~~~ Fixes: 4f75da3666c0 ("linux/dim: Move implementation to .c files") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-25linux/dim: Fix overflow in dim calculationYamin Friedman5-7/+7
While using net_dim, a dim_sample was used without ever initializing the comps value. Added use of DIV_ROUND_DOWN_ULL() to prevent potential overflow, it should not be a problem to save the final result in an int because after the division by epms the value should not be larger than a few thousand. [ 1040.127124] UBSAN: Undefined behaviour in lib/dim/dim.c:78:23 [ 1040.130118] signed integer overflow: [ 1040.131643] 134718714 * 100 cannot be represented in type 'int' Fixes: 398c2b05bbee ("linux/dim: Add completions count to dim_sample") Signed-off-by: Yamin Friedman <yaminf@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-25ife: error out when nla attributes are emptyCong Wang1-0/+5
act_ife at least requires TCA_IFE_PARMS, so we have to bail out when there is no attribute passed in. Reported-by: syzbot+fbb5b288c9cb6a2eeac4@syzkaller.appspotmail.com Fixes: ef6980b6becb ("introduce IFE action") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-25libbpf: silence GCC8 warning about string truncationAndrii Nakryiko1-2/+2
Despite a proper NULL-termination after strncpy(..., ..., IFNAMSIZ - 1), GCC8 still complains about *expected* string truncation: xsk.c:330:2: error: 'strncpy' output may be truncated copying 15 bytes from a string of length 15 [-Werror=stringop-truncation] strncpy(ifr.ifr_name, xsk->ifname, IFNAMSIZ - 1); This patch gets rid of the issue altogether by using memcpy instead. There is no performance regression, as strncpy will still copy and fill all of the bytes anyway. v1->v2: - rebase against bpf tree. Cc: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-24netrom: hold sock when setting skb->destructorCong Wang1-0/+1
sock_efree() releases the sock refcnt, if we don't hold this refcnt when setting skb->destructor to it, the refcnt would not be balanced. This leads to several bug reports from syzbot. I have checked other users of sock_efree(), all of them hold the sock refcnt. Fixes: c8c8218ec5af ("netrom: fix a memory leak in nr_rx_frame()") Reported-and-tested-by: <syzbot+622bdabb128acc33427d@syzkaller.appspotmail.com> Reported-and-tested-by: <syzbot+6eaef7158b19e3fec3a0@syzkaller.appspotmail.com> Reported-and-tested-by: <syzbot+9399c158fcc09b21d0d2@syzkaller.appspotmail.com> Reported-and-tested-by: <syzbot+a34e5f3d0300163f0c87@syzkaller.appspotmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-24ovs: datapath: hide clang frame-overflow warningsArnd Bergmann1-7/+8
Some functions in the datapath code are factored out so that each one has a stack frame smaller than 1024 bytes with gcc. However, when compiling with clang, the functions are inlined more aggressively and combined again so we get net/openvswitch/datapath.c:1124:12: error: stack frame size of 1528 bytes in function 'ovs_flow_cmd_set' [-Werror,-Wframe-larger-than=] Marking both get_flow_actions() and ovs_nla_init_match_and_action() as 'noinline_for_stack' gives us the same behavior that we see with gcc, and no warning. Note that this does not mean we actually use less stack, as the functions call each other, and we still get three copies of the large 'struct sw_flow_key' type on the stack. The comment tells us that this was previously considered safe, presumably since the netlink parsing functions are called with a known backchain that does not also use a lot of stack space. Fixes: 9cc9a5cb176c ("datapath: Avoid using stack larger than 1024.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-24net/tls: add myself as a co-maintainerJakub Kicinski1-0/+1
I've been spending quite a bit of time fixing and preventing bit rot in the core TLS code. TLS seems to only be growing in importance, I'd like to help ensuring the quality of our implementation. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-24net: phy: mscc: initialize stats arrayAndreas Schwab1-8/+8
The memory allocated for the stats array may contain arbitrary data. Fixes: e4f9ba642f0b ("net: phy: mscc: add support for VSC8514 PHY.") Fixes: 00d70d8e0e78 ("net: phy: mscc: add support for VSC8574 PHY") Fixes: a5afc1678044 ("net: phy: mscc: add support for VSC8584 PHY") Fixes: f76178dc5218 ("net: phy: mscc: add ethtool statistics counters") Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-24net: phylink: don't start and stop SGMII PHYs in SFP modules twiceArseny Solokha1-4/+4
SFP modules connected using the SGMII interface have their own PHYs which are handled by the struct phylink's phydev field. On the other hand, for the modules connected using 1000Base-X interface that field is not set. Since commit ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices and sfp cages") phylink_start() ends up setting the phydev field using the sfp-bus infrastructure, which eventually calls phy_start() on it, and then calling phy_start() again on the same phydev from phylink_start() itself. Similar call sequence holds for phylink_stop(), only in the reverse order. This results in WARNs during network interface bringup and shutdown when a copper SFP module is connected, as phy_start() and phy_stop() are called twice in a row for the same phy_device: % ip link set up dev eth0 ------------[ cut here ]------------ called from state UP WARNING: CPU: 1 PID: 155 at drivers/net/phy/phy.c:895 phy_start+0x74/0xc0 Modules linked in: CPU: 1 PID: 155 Comm: backend Not tainted 5.2.0+ #1 NIP: c0227bf0 LR: c0227bf0 CTR: c004d224 REGS: df547720 TRAP: 0700 Not tainted (5.2.0+) MSR: 00029000 <CE,EE,ME> CR: 24002822 XER: 00000000 GPR00: c0227bf0 df5477d8 df5d7080 00000014 df9d2370 df9d5ac4 1f4eb000 00000001 GPR08: c061fe58 00000000 00000000 df5477d8 0000003c 100c8768 00000000 00000000 GPR16: df486a00 c046f1c8 c046eea0 00000000 c046e904 c0239604 db68449c 00000000 GPR24: e9083204 00000000 00000001 db684460 e9083404 00000000 db6dce00 db6dcc00 NIP [c0227bf0] phy_start+0x74/0xc0 LR [c0227bf0] phy_start+0x74/0xc0 Call Trace: [df5477d8] [c0227bf0] phy_start+0x74/0xc0 (unreliable) [df5477e8] [c023cad0] startup_gfar+0x398/0x3f4 [df547828] [c023cf08] gfar_enet_open+0x364/0x374 [df547898] [c029d870] __dev_open+0xe4/0x140 [df5478c8] [c029db70] __dev_change_flags+0xf0/0x188 [df5478f8] [c029dc28] dev_change_flags+0x20/0x54 [df547918] [c02ae304] do_setlink+0x310/0x818 [df547a08] [c02b1eb8] __rtnl_newlink+0x384/0x6b0 [df547c28] [c02b222c] rtnl_newlink+0x48/0x68 [df547c48] [c02ad7c8] rtnetlink_rcv_msg+0x240/0x27c [df547c98] [c02cc068] netlink_rcv_skb+0x8c/0xf0 [df547cd8] [c02cba3c] netlink_unicast+0x114/0x19c [df547d08] [c02cbd74] netlink_sendmsg+0x2b0/0x2c0 [df547d58] [c027b668] sock_sendmsg_nosec+0x20/0x40 [df547d68] [c027d080] ___sys_sendmsg+0x17c/0x1dc [df547e98] [c027df7c] __sys_sendmsg+0x68/0x84 [df547ef8] [c027e430] sys_socketcall+0x1a0/0x204 [df547f38] [c000d1d8] ret_from_syscall+0x0/0x38 --- interrupt: c01 at 0xfd4e030 LR = 0xfd4e010 Instruction dump: 813f0188 38800000 2b890005 419d0014 3d40c046 5529103a 394aa208 7c8a482e 3c60c046 3863a1b8 4cc63182 4be009a1 <0fe00000> 48000030 3c60c046 3863a1d0 ---[ end trace d4c095aeaf6ea998 ]--- and % ip link set down dev eth0 ------------[ cut here ]------------ called from state HALTED WARNING: CPU: 1 PID: 184 at drivers/net/phy/phy.c:858 phy_stop+0x3c/0x88 <...> Call Trace: [df581788] [c0228450] phy_stop+0x3c/0x88 (unreliable) [df581798] [c022d548] sfp_sm_phy_detach+0x1c/0x44 [df5817a8] [c022e8cc] sfp_sm_event+0x4b0/0x87c [df581848] [c022f04c] sfp_upstream_stop+0x34/0x44 [df581858] [c0225608] phylink_stop+0x7c/0xe4 [df581868] [c023c57c] stop_gfar+0x7c/0x94 [df581888] [c023c5b8] gfar_close+0x24/0x94 [df5818a8] [c0298688] __dev_close_many+0xdc/0xf8 [df5818c8] [c029db58] __dev_change_flags+0xd8/0x188 [df5818f8] [c029dc28] dev_change_flags+0x20/0x54 [df581918] [c02ae304] do_setlink+0x310/0x818 [df581a08] [c02b1eb8] __rtnl_newlink+0x384/0x6b0 [df581c28] [c02b222c] rtnl_newlink+0x48/0x68 [df581c48] [c02ad7c8] rtnetlink_rcv_msg+0x240/0x27c [df581c98] [c02cc068] netlink_rcv_skb+0x8c/0xf0 [df581cd8] [c02cba3c] netlink_unicast+0x114/0x19c [df581d08] [c02cbd74] netlink_sendmsg+0x2b0/0x2c0 [df581d58] [c027b668] sock_sendmsg_nosec+0x20/0x40 [df581d68] [c027d080] ___sys_sendmsg+0x17c/0x1dc [df581e98] [c027df7c] __sys_sendmsg+0x68/0x84 [df581ef8] [c027e430] sys_socketcall+0x1a0/0x204 [df581f38] [c000d1d8] ret_from_syscall+0x0/0x38 <...> ---[ end trace d4c095aeaf6ea999 ]--- SFP modules with the 1000Base-X interface are not affected. Place explicit calls to phy_start() and phy_stop() before enabling or after disabling an attached SFP module, where phydev is not yet set (or is already unset), so they will be made only from the inside of sfp-bus, if needed. Fixes: 217962615662 ("net: phy: warn if phy_start is called from invalid state") Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-24Merge tag 'linux-can-fixes-for-5.3-20190724' of ↵David S. Miller6-57/+98
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2019-07-24 this is a pull reqeust of 7 patches for net/master. The first patch is by Rasmus Villemoes add a missing netif_carrier_off() to register_candev() so that generic netdev trigger based LEDs are initially off. Nikita Yushchenko's patch for the rcar_canfd driver fixes a possible IRQ storm on high load. The patch by Weitao Hou for the mcp251x driver add missing error checking to the work queue allocation. Both Wen Yang's and Joakim Zhang's patch for the flexcan driver fix a problem with the stop-mode. Stephane Grosjean contributes a patch for the peak_usb driver to fix a potential double kfree_skb(). The last patch is by YueHaibing and fixes the error path in can-gw's cgw_module_init() function. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-24ip6_gre: reload ipv6h in prepare_ip6gre_xmit_ipv6Haishuang Yan1-1/+2
Since ip6_tnl_parse_tlv_enc_lim() can call pskb_may_pull() which may change skb->data, so we need to re-load ipv6h at the right place. Fixes: 898b29798e36 ("ip6_gre: Refactor ip6gre xmit codes") Cc: William Tu <u9012063@gmail.com> Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-24net/ipv4: cleanup error condition testingPavel Machek1-1/+1
Cleanup testing for error condition. Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-24can: gw: Fix error path of cgw_module_initYueHaibing1-15/+33
This patch add error path for cgw_module_init to avoid possible crash if some error occurs. Fixes: c1aabdf379bc ("can-gw: add netlink based CAN routing") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-07-24can: peak_usb: fix potential double kfree_skb()Stephane Grosjean1-4/+4
When closing the CAN device while tx skbs are inflight, echo skb could be released twice. By calling close_candev() before unlinking all pending tx urbs, then the internal echo_skb[] array is fully and correctly cleared before the USB write callback and, therefore, can_get_echo_skb() are called, for each aborted URB. Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core") Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-07-24can: flexcan: fix stop mode acknowledgmentJoakim Zhang1-4/+27
To enter stop mode, the CPU should manually assert a global Stop Mode request and check the acknowledgment asserted by FlexCAN. The CPU must only consider the FlexCAN in stop mode when both request and acknowledgment conditions are satisfied. Fixes: de3578c198c6 ("can: flexcan: add self wakeup support") Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Cc: linux-stable <stable@vger.kernel.org> # >= v5.0 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-07-24can: flexcan: fix an use-after-free in flexcan_setup_stop_mode()Wen Yang1-3/+5
The gpr_np variable is still being used in dev_dbg() after the of_node_put() call, which may result in use-after-free. Fixes: de3578c198c6 ("can: flexcan: add self wakeup support") Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: linux-stable <stable@vger.kernel.org> # >= v5.0 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-07-24can: mcp251x: add error check when wq alloc failedWeitao Hou1-27/+22
add error check when workqueue alloc failed, and remove redundant code to make it clear. Fixes: e0000163e30e ("can: Driver for the Microchip MCP251x SPI CAN controllers") Signed-off-by: Weitao Hou <houweitaoo@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Tested-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-07-24can: rcar_canfd: fix possible IRQ storm on high loadNikita Yushchenko1-4/+5
We have observed rcar_canfd driver entering IRQ storm under high load, with following scenario: - rcar_canfd_global_interrupt() in entered due to Rx available, - napi_schedule_prep() is called, and sets NAPIF_STATE_SCHED in state - Rx fifo interrupts are masked, - rcar_canfd_global_interrupt() is entered again, this time due to error interrupt (e.g. due to overflow), - since scheduled napi poller has not yet executed, condition for calling napi_schedule_prep() from rcar_canfd_global_interrupt() remains true, thus napi_schedule_prep() gets called and sets NAPIF_STATE_MISSED flag in state, - later, napi poller function rcar_canfd_rx_poll() gets executed, and calls napi_complete_done(), - due to NAPIF_STATE_MISSED flag in state, this call does not clear NAPIF_STATE_SCHED flag from state, - on return from napi_complete_done(), rcar_canfd_rx_poll() unmasks Rx interrutps, - Rx interrupt happens, rcar_canfd_global_interrupt() gets called and calls napi_schedule_prep(), - since NAPIF_STATE_SCHED is set in state at this time, this call returns false, - due to that false return, rcar_canfd_global_interrupt() returns without masking Rx interrupt - and this results into IRQ storm: unmasked Rx interrupt happens again and again is misprocessed in the same way. This patch fixes that scenario by unmasking Rx interrupts only when napi_complete_done() returns true, which means it has cleared NAPIF_STATE_SCHED in state. Fixes: dd3bd23eb438 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-07-24can: dev: call netif_carrier_off() in register_candev()Rasmus Villemoes1-0/+2
CONFIG_CAN_LEDS is deprecated. When trying to use the generic netdev trigger as suggested, there's a small inconsistency with the link property: The LED is on initially, stays on when the device is brought up, and then turns off (as expected) when the device is brought down. Make sure the LED always reflects the state of the CAN device. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-07-23libbpf: fix using uninitialized ioctl resultsIlya Maximets1-4/+3
'channels.max_combined' initialized only on ioctl success and errno is only valid on ioctl failure. The code doesn't produce any runtime issues, but makes memory sanitizers angry: Conditional jump or move depends on uninitialised value(s) at 0x55C056F: xsk_get_max_queues (xsk.c:336) by 0x55C05B2: xsk_create_bpf_maps (xsk.c:354) by 0x55C089F: xsk_setup_xdp_prog (xsk.c:447) by 0x55C0E57: xsk_socket__create (xsk.c:601) Uninitialised value was created by a stack allocation at 0x55C04CD: xsk_get_max_queues (xsk.c:318) Additionally fixed warning on uninitialized bytes in ioctl arguments: Syscall param ioctl(SIOCETHTOOL) points to uninitialised byte(s) at 0x648D45B: ioctl (in /usr/lib64/libc-2.28.so) by 0x55C0546: xsk_get_max_queues (xsk.c:330) by 0x55C05B2: xsk_create_bpf_maps (xsk.c:354) by 0x55C089F: xsk_setup_xdp_prog (xsk.c:447) by 0x55C0E57: xsk_socket__create (xsk.c:601) Address 0x1ffefff378 is on thread 1's stack in frame #1, created by xsk_get_max_queues (xsk.c:318) Uninitialised value was created by a stack allocation at 0x55C04CD: xsk_get_max_queues (xsk.c:318) CC: Magnus Karlsson <magnus.karlsson@intel.com> Fixes: 1cad07884239 ("libbpf: add support for using AF_XDP sockets") Signed-off-by: Ilya Maximets <i.maximets@samsung.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-23Merge branch 'fix-gso_segs'Alexei Starovoitov2-3/+14
Eric Dumazet says: ==================== First patch changes the kernel, second patch adds a new test. Note that other patches might be needed to take care of similar issues in sock_ops_convert_ctx_access() and SOCK_OPS_GET_FIELD() ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-23selftests/bpf: add another gso_segs accessEric Dumazet1-0/+11
Use BPF_REG_1 for source and destination of gso_segs read, to exercise "bpf: fix access to skb_shared_info->gso_segs" fix. Signed-off-by: Eric Dumazet <edumazet@google.com> Suggested-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-23bpf: fix access to skb_shared_info->gso_segsEric Dumazet1-3/+3
It is possible we reach bpf_convert_ctx_access() with si->dst_reg == si->src_reg Therefore, we need to load BPF_REG_AX before eventually mangling si->src_reg. syzbot generated this x86 code : 3: 55 push %rbp 4: 48 89 e5 mov %rsp,%rbp 7: 48 81 ec 00 00 00 00 sub $0x0,%rsp // Might be avoided ? e: 53 push %rbx f: 41 55 push %r13 11: 41 56 push %r14 13: 41 57 push %r15 15: 6a 00 pushq $0x0 17: 31 c0 xor %eax,%eax 19: 48 8b bf c0 00 00 00 mov 0xc0(%rdi),%rdi 20: 44 8b 97 bc 00 00 00 mov 0xbc(%rdi),%r10d 27: 4c 01 d7 add %r10,%rdi 2a: 48 0f b7 7f 06 movzwq 0x6(%rdi),%rdi // Crash 2f: 5b pop %rbx 30: 41 5f pop %r15 32: 41 5e pop %r14 34: 41 5d pop %r13 36: 5b pop %rbx 37: c9 leaveq 38: c3 retq Fixes: d9ff286a0f59 ("bpf: allow BPF programs access skb_shared_info->gso_segs field") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-23net: thunderx: Use fwnode_get_mac_address()Andy Shevchenko1-12/+6
Replace the custom implementation with fwnode_get_mac_address, which works on both DT and ACPI platforms. While here, replace memcpy() by ether_addr_copy(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23bpf: fix narrower loads on s390Ilya Leoshkevich2-2/+15
The very first check in test_pkt_md_access is failing on s390, which happens because loading a part of a struct __sk_buff field produces an incorrect result. The preprocessed code of the check is: { __u8 tmp = *((volatile __u8 *)&skb->len + ((sizeof(skb->len) - sizeof(__u8)) / sizeof(__u8))); if (tmp != ((*(volatile __u32 *)&skb->len) & 0xFF)) return 2; }; clang generates the following code for it: 0: 71 21 00 03 00 00 00 00 r2 = *(u8 *)(r1 + 3) 1: 61 31 00 00 00 00 00 00 r3 = *(u32 *)(r1 + 0) 2: 57 30 00 00 00 00 00 ff r3 &= 255 3: 5d 23 00 1d 00 00 00 00 if r2 != r3 goto +29 <LBB0_10> Finally, verifier transforms it to: 0: (61) r2 = *(u32 *)(r1 +104) 1: (bc) w2 = w2 2: (74) w2 >>= 24 3: (bc) w2 = w2 4: (54) w2 &= 255 5: (bc) w2 = w2 The problem is that when verifier emits the code to replace a partial load of a struct __sk_buff field (*(u8 *)(r1 + 3)) with a full load of struct sk_buff field (*(u32 *)(r1 + 104)), an optional shift and a bitwise AND, it assumes that the machine is little endian and incorrectly decides to use a shift. Adjust shift count calculation to account for endianness. Fixes: 31fd85816dbe ("bpf: permits narrower load from bpf program context fields") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-23sky2: Disable MSI on ASUS P6TTakashi Iwai1-0/+7
The onboard sky2 NIC on ASUS P6T WS PRO doesn't work after PM resume due to the infamous IRQ problem. Disabling MSI works around it, so let's add it to the blacklist. Unfortunately the BIOS on the machine doesn't fill the standard DMI_SYS_* entry, so we pick up DMI_BOARD_* entries instead. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1142496 Reported-and-tested-by: Marcus Seyfarth <m.seyfarth@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23net: dsa: sja1105: sja1105_main: Add of_node_put()Nishka Dasgupta1-0/+3
Each iteration of for_each_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23net: dsa: mv88e6xxx: chip: Add of_node_put() before returnNishka Dasgupta1-0/+1
Each iteration of for_each_available_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23Merge branch 'selftests-forwarding-GRE-multipath-fixes'David S. Miller1-12/+16
Ido Schimmel says: ==================== selftests: forwarding: GRE multipath fixes Patch #1 ensures IPv4 forwarding is enabled during the test. Patch #2 fixes the flower filters used to measure the distribution of the traffic between the two nexthops, so that the test will pass regardless if traffic is offloaded or not. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23selftests: forwarding: gre_multipath: Fix flower filtersIdo Schimmel1-12/+12
The TC filters used in the test do not work with veth devices because the outer Ethertype is 802.1Q and not IPv4. The test passes with mlxsw netdevs since the hardware always looks at "The first Ethertype that does not point to either: VLAN, CNTAG or configurable Ethertype". Fix this by matching on the VLAN ID instead, but on the ingress side. The reason why this is not performed at egress is explained in the commit cited below. Fixes: 541ad323db3a ("selftests: forwarding: gre_multipath: Update next-hop statistics match criteria") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Stephen Suryaputra <ssuryaextr@gmail.com> Tested-by: Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23selftests: forwarding: gre_multipath: Enable IPv4 forwardingIdo Schimmel1-0/+4
The test did not enable IPv4 forwarding during its setup phase, which causes the test to fail on machines where IPv4 forwarding is disabled. Fixes: 54818c4c4b93 ("selftests: forwarding: Test multipath tunneling") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Stephen Suryaputra <ssuryaextr@gmail.com> Tested-by: Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22Revert "net: hns: fix LED configuration for marvell phy"David S. Miller1-22/+1
This reverts commit f4e5f775db5a4631300dccd0de5eafb50a77c131. Andrew Lunn says this should be handled another way. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: stmmac: Do not cut down 1G modesJose Abreu1-8/+3
Some glue logic drivers support 1G without having GMAC/GMAC4/XGMAC. Let's allow this speed by default. Reported-by: Ondrej Jirman <megi@xff.cz> Tested-by: Ondrej Jirman <megi@xff.cz> Fixes: 5b0d7d7da64b ("net: stmmac: Add the missing speeds that XGMAC supports") Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22Merge branch 'stmmac-fixes'David S. Miller1-11/+10
Jose Abreu says: ==================== net: stmmac: Two fixes Two fixes targeting -net. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: stmmac: Use kcalloc() instead of kmalloc_array()Jose Abreu1-9/+8
We need the memory to be zeroed upon allocation so use kcalloc() instead. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: stmmac: RX Descriptors need to be clean before setting buffersJose Abreu1-2/+2
RX Descriptors are being cleaned after setting the buffers which may lead to buffer addresses being wiped out. Fix this by clearing earlier the RX Descriptors. Fixes: 2af6106ae949 ("net: stmmac: Introducing support for Page Pool") Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: hns: fix LED configuration for marvell phyYonglong Liu1-1/+22
Since commit(net: phy: marvell: change default m88e1510 LED configuration), the active LED of Hip07 devices is always off, because Hip07 just use 2 LEDs. This patch adds a phy_register_fixup_for_uid() for m88e1510 to correct the LED configuration. Fixes: 077772468ec1 ("net: phy: marvell: change default m88e1510 LED configuration") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Reviewed-by: linyunsheng <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: mvpp2: Don't check for 3 consecutive Idle frames for 10G linksMaxime Chevallier1-3/+3
PPv2's XLGMAC can wait for 3 idle frames before triggering a link up event. This can cause the link to be stuck low when there's traffic on the interface, so disable this feature. Fixes: 4bb043262878 ("net: mvpp2: phylink support") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22bonding: Force slave speed check after link state recovery for 802.3adThomas Falcon1-0/+9
The following scenario was encountered during testing of logical partition mobility on pseries partitions with bonded ibmvnic adapters in LACP mode. 1. Driver receives a signal that the device has been swapped, and it needs to reset to initialize the new device. 2. Driver reports loss of carrier and begins initialization. 3. Bonding driver receives NETDEV_CHANGE notifier and checks the slave's current speed and duplex settings. Because these are unknown at the time, the bond sets its link state to BOND_LINK_FAIL and handles the speed update, clearing AD_PORT_LACP_ENABLE. 4. Driver finishes recovery and reports that the carrier is on. 5. Bond receives a new notification and checks the speed again. The speeds are valid but miimon has not altered the link state yet. AD_PORT_LACP_ENABLE remains off. Because the slave's link state is still BOND_LINK_FAIL, no further port checks are made when it recovers. Though the slave devices are operational and have valid speed and duplex settings, the bond will not send LACPDU's. The simplest fix I can see is to force another speed check in bond_miimon_commit. This way the bond will update AD_PORT_LACP_ENABLE if needed when transitioning from BOND_LINK_FAIL to BOND_LINK_UP. CC: Jarod Wilson <jarod@redhat.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull preemption Kconfig fix from Thomas Gleixner: "The PREEMPT_RT stub config renamed PREEMPT to PREEMPT_LL and defined PREEMPT outside of the menu and made it selectable by both PREEMPT_LL and PREEMPT_RT. Stupid me missed that 114 defconfigs select CONFIG_PREEMPT which obviously can't work anymore. oldconfig builds are affected as well, but it's more obvious as the user gets asked. [old]defconfig silently fixes it up and selects PREEMPT_NONE. Unbreak it by undoing the rename and adding a intermediate config symbol which is selected by both PREEMPT and PREEMPT_RT. That requires to chase down a few #ifdefs, but it's better than tweaking 114 defconfigs and annoying users" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt, Kconfig: Unbreak def/oldconfig with CONFIG_PREEMPT=y
2019-07-22Merge tag 'for-linus-20190722' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd polling fix from Christian Brauner: "A fix for pidfd polling. It ensures that the task's exit state is visible to all waiters" * tag 'for-linus-20190722' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: pidfd: fix a poll race when setting exit_state
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-05 06:36:41 +0000