summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-01-07phy: Centralize setting driver module ownerAndrew Lunn27-121/+12
Rather than have each driver set the driver owner field, do it once in the core code. This will also help with later changes, when the device structure will move. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Move PHY PM operations into phy_deviceAndrew Lunn3-74/+121
The MDIO PM operations are really PHY device PM operations. So move them into phy_device. This will be needed when we support devices on the mdio bus which are not PHYs. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07dsa: Register netdev before phyAndrew Lunn1-7/+7
When the phy is connected, an info message is printed. If the netdev it is attached to has not been registered yet, the name 'uninitialised' in the output. By registering the netdev first, then connecting they phy, we can avoid this. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy_device: Move phy attributes into phy_deviceAndrew Lunn2-42/+44
The mdio_bus exports three attributes: - PHY ID is the unique 32-bits identifier for a MDIO device implementing standard MII registers MII_PHYSID1/2, which is not guaranteed to be the case for non-standard compliant devices (e.g: Ethernet switches) - PHY interface describes the data-path of the PHY/MDIO device, which is not strictly a PHY thing, but is required and needed for PHY devices to function, a MDIO device could be a control device exclusively - PHY has fixups describes what the PHY driver may have done, so completely PHY specific These are all phy attributes, not generic mdio attributes. So move the attributes into the phy device code. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add API for {un}registering an mdio device to a bus.Andrew Lunn17-49/+98
Rather than have drivers directly manipulate the mii_bus structure, provide and API for registering and unregistering devices on an MDIO bus, and performing lookups. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07of: phy: Only register a phy device for physAndrew Lunn1-7/+34
We will soon support devices other than phys on the mdio bus. Look at a child's compatibility string to determine if it is a phy, before registering a phy device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add an mdio_device structureAndrew Lunn35-151/+165
Not all devices attached to an MDIO bus are phys. So add an mdio_device structure to represent the generic parts of an mdio device, and place this structure into the phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio: Move allocation of interrupts into coreAndrew Lunn54-396/+48
Have mdio_alloc() create the array of interrupt numbers, and initialize it to POLLING. This is what most MDIO drivers want, so allowing code to be removed from the drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: mdio-octeon: Use devm_mdiobus_alloc_size()Andrew Lunn1-7/+5
Rather than use devm_kzalloc(), use the mdio helper function. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Centralise print about attached phyAndrew Lunn25-82/+64
Many Ethernet drivers contain the same netdev_info() print statement about the attached phy. Move it into the phy device code. Additionally add a varargs function which can be used to append additional information. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: phy_{read|write}_mmd_indirect: get addr from phydevAndrew Lunn5-37/+25
The address of the device can be determined from the phydev structure, rather than passing it as a parameter. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07net: dnet: Use phy_find_first() helperAndrew Lunn1-7/+1
Replace the open coded search for the first phy with a call to the existing helper function. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: add phydev_name() wrapperAndrew Lunn26-39/+44
Add a phydev_name() function, to help with moving some structure members from phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add phydev_err() and phydev_dbg() macrosAndrew Lunn5-13/+23
In preparation for moving some of the phy_device structure members, add macros for printing errors and debug information. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Use phy_read() instead of mdiobus_read()Andrew Lunn1-68/+36
Since we have a phydev, make use of it and the phy_read() function. This will help with later refactoring. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio: Move mdiobus_read/write operatings into mdio.hAndrew Lunn2-5/+7
These are logically MDIO operations, not phy operations, so move them into the mdio header. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Consistently use addr for address on an MII busAndrew Lunn1-2/+2
Within phy.h, an address on an MII bus has been called both addr and phy_id. phy_id is particularly confusion, since it also means the ID found in register 3, if the device on the bus is a phy. Consistently use addr. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller32-134/+173
2016-01-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds24-117/+150
Pull networking fixes from David Miller: "As usual, there are a couple straggler bug fixes: 1) qlcnic_alloc_mbx_args() error returns are not checked in qlcnic driver. Fix from Insu Yun. 2) SKB refcounting bug in connector, from Florian Westphal. 3) vrf_get_saddr() has to propagate fib_lookup() errors to it's callers, from David Ahern. 4) Fix AF_UNIX splice/bind deadlock, from Rainer Weikusat. 5) qdisc_rcu_free() fails to free the per-cpu qstats. Fix from John Fastabend. 6) vmxnet3 driver passes wrong page to dma_map_page(), fix from Shrikrishna Khare. 7) Don't allow zero cwnd in tcp_cwnd_reduction(), from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: tcp: fix zero cwnd in tcp_cwnd_reduction Driver: Vmxnet3: Fix regression caused by 5738a09 net: qmi_wwan: Add WeTelecom-WPD600N mkiss: fix scribble on freed memory net: possible use after free in dst_release net: sched: fix missing free per cpu on qstats ARM: net: bpf: fix zero right shift 6pack: fix free memory scribbles net: filter: make JITs zero A for SKF_AD_ALU_XOR_X bridge: Only call /sbin/bridge-stp for the initial network namespace af_unix: Fix splice-bind deadlock net: Propagate lookup failure in l3mdev_get_saddr to caller r8152: add reset_resume function connector: bump skb->users before callback invocation cxgb4: correctly handling failed allocation qlcnic: correctly handle qlcnic_alloc_mbx_args
2016-01-06tcp: fix zero cwnd in tcp_cwnd_reductionYuchung Cheng1-0/+3
Patch 3759824da87b ("tcp: PRR uses CRB mode by default and SS mode conditionally") introduced a bug that cwnd may become 0 when both inflight and sndcnt are 0 (cwnd = inflight + sndcnt). This may lead to a div-by-zero if the connection starts another cwnd reduction phase by setting tp->prior_cwnd to the current cwnd (0) in tcp_init_cwnd_reduction(). To prevent this we skip PRR operation when nothing is acked or sacked. Then cwnd must be positive in all cases as long as ssthresh is positive: 1) The proportional reduction mode inflight > ssthresh > 0 2) The reduction bound mode a) inflight == ssthresh > 0 b) inflight < ssthresh sndcnt > 0 since newly_acked_sacked > 0 and inflight < ssthresh Therefore in all cases inflight and sndcnt can not both be 0. We check invalid tp->prior_cwnd to avoid potential div0 bugs. In reality this bug is triggered only with a sequence of less common events. For example, the connection is terminating an ECN-triggered cwnd reduction with an inflight 0, then it receives reordered/old ACKs or DSACKs from prior transmission (which acks nothing). Or the connection is in fast recovery stage that marks everything lost, but fails to retransmit due to local issues, then receives data packets from other end which acks nothing. Fixes: 3759824da87b ("tcp: PRR uses CRB mode by default and SS mode conditionally") Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06net: Add eth_platform_get_mac_address() helper.David S. Miller3-0/+41
A repeating pattern in drivers has become to use OF node information and, if not found, platform specific host information to extract the ethernet address for a given device. Currently this is done with a call to of_get_mac_address() and then some ifdef'd stuff for SPARC. Consolidate this into a portable routine, and provide the arch_get_platform_mac_address() weak function hook for all architectures to implement if they want. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06Driver: Vmxnet3: Fix regression caused by 5738a09Shrikrishna Khare2-6/+6
Reported-by: Bingkuo Liu <bingkuol@vmware.com> Signed-off-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06net: move ndo_features_check() close to ndo_start_xmit()Eric Dumazet1-11/+11
TX fast path uses ndo_start_xmit(), ndo_features_check() and ndo_select_queue(). Move ndo_features_check() close to ndo_start_xmit() to increase data locality. All "struct net_device_ops" should now be using C99 initializers. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06net: qmi_wwan: Add WeTelecom-WPD600NKristian Evensen1-0/+1
The WeTelecom-WPD600N is an LTE module that, in addition to supporting most "normal" bands, also supports LTE over 450MHz. Manual testing showed that only interface number three replies to QMI messages. Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06fsl/fman: double free on probe failureDan Carpenter1-1/+0
"priv" is allocated with devm_kzalloc() so freeing it here with kfree() will lead to a double free. Fixes: 3933961682a3 ('fsl/fman: Add FMan MAC driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06fsl/fman: fix the pause_time testDan Carpenter1-1/+1
pause_time is unsigned so it can't be less than zero. The bug means that we allow invalid pause-times. Fixes: 57ba4c9b56d8 ('fsl/fman: Add FMan MAC support') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06mlxsw: core: remove an unnecessary conditionDan Carpenter1-1/+1
We checked "err" on the lines before so we know it's zero here. These cause a static checker warning because checking known things can indicate a bug. Maybe there is a missing assignment or we are checking the wrong variable. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06mkiss: fix scribble on freed memoryAlan1-0/+5
commit d79f16c046086f4fe0d42184a458e187464eb83e fixed a user triggerable scribble on free memory but added a new one which allows the user to scribble even more and user controlled data into freed space. As with 6pack we need to halt the queue before we free the buffers, because the transmit logic is not protected by the semaphore. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06ethernet/atheros/alx: sanitize buffer sizing and paddingJarod Wilson3-12/+14
This is based on the work done by Przemek Rudy in bug 70761 at bugzilla.kernel.org, but with some work done to disentagle and clarify things a bit. Similar to Przemek's work and other drivers, we're adding a padding of 16 here, but we're also disentangling mtu size calculations from max buffer size calculations a bit, and adding ETH_HLEN to the value written into ALX_MTU. Hopefully, with a bit more consistency and clarity, things behave better here. Sadly, I can only test in my alx-driven E2200, which worked just fine before this patch. In comment #58 of bug 70761, Eugene A. Shatokhin reports that this patch does help considerably for a ROSA Linux user of his with an AR8162 network adapter when patched into a 4.1.x-based kernel, with several days of normal operation where wired network previously wasn't usable without setting MTU to 9000 as a work-around. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70761 CC: "Eugene A. Shatokhin" <eugene.shatokhin@rosalab.ru> CC: Przemek Rudy <prudy1@o2.pl> CC: Jay Cliburn <jcliburn@gmail.com> CC: Chris Snook <chris.snook@gmail.com> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06net: possible use after free in dst_releaseFrancesco Ruggeri1-1/+2
dst_release should not access dst->flags after decrementing __refcnt to 0. The dst_entry may be in dst_busy_list and dst_gc_task may dst_destroy it before dst_release gets a chance to access dst->flags. Fixes: d69bbf88c8d0 ("net: fix a race in dst_release()") Fixes: 27b75c95f10d ("net: avoid RCU for NOCACHE dst") Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06Merge branch 'mlxsw-vlan_filtering-offload'David S. Miller6-8/+82
Jiri Pirko says: ==================== mlxsw: add offload support for vlan_filtering option Elad says: This patch adds SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING port attribute. When a bridge is offloaded to hardware, the hardware can learn if the bridge is .1Q bridge (VLAN-aware) or not VLAN aware bridge. In order to toggle the mode a user can use sysfs: $ echo 1 > /sys/devices/virtual/net/br0/bridge/vlan_filtering or via iproute2: $ ip link set dev br0 type bridge vlan_filtering 1 --- v1->v2: small fix in patch #1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06mlxsw: Remember untagged VLANsElad Raz3-1/+17
When a vlan is been configured, remeber the untagged mode of the vlan. When displaying the list of configured VLANs, show the untagged attribute. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06mlxsw: Disable vlan_filtering for non .1D bridgeElad Raz1-0/+21
When a port is bridged, the bridge must be vlan aware bridge (.1Q) or the bridging should be on top of VLAN interfaces (.1D bridge). Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06mlxsw: Renaming local variable names for consistencyElad Raz1-3/+3
Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06mlxsw: Fixing vlans init rangeElad Raz1-1/+2
Initialize VLANs 0..4095 (Remove init for VID 4096). Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06bridge: add vlan filtering change for new bridged deviceElad Raz1-0/+11
Notifying hardware about newly bridged port vlan-aware changes. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06bridge: add vlan filtering change notificationElad Raz1-2/+16
Notifying hardware about bridge vlan-aware changes. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06switchdev: add bridge vlan_filtering attributeElad Raz1-0/+2
Adding vlan_filtering attribute to allow hardware vendor to support vlan-aware bridges. Vlan_filtering is a per-bridge attribute. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06bridge: Propagate vlan add failure to userElad Raz1-1/+10
Disallow adding interfaces to a bridge when vlan filtering operation failed. Send the failure code to the user. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06net: sched: fix missing free per cpu on qstatsJohn Fastabend1-1/+3
When a qdisc is using per cpu stats (currently just the ingress qdisc) only the bstats are being freed. This also free's the qstats. Fixes: b0ab6f92752b9f9d8 ("net: sched: enable per cpu qstats") Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06ARM: net: bpf: fix zero right shiftRabin Vincent1-1/+2
The LSR instruction cannot be used to perform a zero right shift since a 0 as the immediate value (imm5) in the LSR instruction encoding means that a shift of 32 is perfomed. See DecodeIMMShift() in the ARM ARM. Make the JIT skip generation of the LSR if a zero-shift is requested. This was found using american fuzzy lop. Signed-off-by: Rabin Vincent <rabin@rab.in> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06soreuseport: change consume_skb to kfree_skb in error caseCraig Gallek1-1/+1
Fixes: 538950a1b752 ("soreuseport: setsockopt SO_ATTACH_REUSEPORT_[CE]BPF") Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Craig Gallek <kraig@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06soreuseport: pass skb to secondary UDP socket lookupCraig Gallek3-8/+59
This socket-lookup path did not pass along the skb in question in my original BPF-based socket selection patch. The skb in the udpN_lib_lookup2 path can be used for BPF-based socket selection just like it is in the 'traditional' udpN_lib_lookup path. udpN_lib_lookup2 kicks in when there are greater than 10 sockets in the same hlist slot. Coincidentally, I chose 10 sockets per reuseport group in my functional test, so the lookup2 path was not excersised. This adds an additional set of tests with 20 sockets. Fixes: 538950a1b752 ("soreuseport: setsockopt SO_ATTACH_REUSEPORT_[CE]BPF") Fixes: 3ca8e4029969 ("soreuseport: BPF selection functional test") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Craig Gallek <kraig@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-066pack: fix free memory scribblesOne Thousand Gnomes1-0/+6
commit acf673a3187edf72068ee2f92f4dc47d66baed47 fixed a user triggerable free memory scribble but in doing so replaced it with a different one that allows the user to control the data and scribble even more. sixpack_close is called by the tty layer in tty context. The tty context is protected by sp_get() and sp_put(). However network layer activity via sp_xmit() is not protected this way. We must therefore stop the queue otherwise the user gets to dump a buffer mostly of their choice into freed kernel pages. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06mlxsw: pci: Adjust value of CPU egress traffic classIdo Schimmel1-1/+1
During initialization, when creating the send descriptor queues (SDQs), we specify the CPU egress traffic class of each SDQ. The maximum number of classes of this type is different in the two ASICs supported by this PCI driver. New firmware versions check this value is set correctly, which causes errors on the Spectrum ASIC, as its max exposed egress traffic class is lower than 7. Solve this by setting this field to 3, which is an acceptable value for both ASICs. Note that we currently do not expose the QoS capabilities of the ASICs, so setting this to an hardcoded value is OK for now. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06net: filter: make JITs zero A for SKF_AD_ALU_XOR_XRabin Vincent5-56/+25
The SKF_AD_ALU_XOR_X ancillary is not like the other ancillary data instructions since it XORs A with X while all the others replace A with some loaded value. All the BPF JITs fail to clear A if this is used as the first instruction in a filter. This was found using american fuzzy lop. Add a helper to determine if A needs to be cleared given the first instruction in a filter, and use this in the JITs. Except for ARM, the rest have only been compile-tested. Fixes: 3480593131e0 ("net: filter: get rid of BPF_S_* enum") Signed-off-by: Rabin Vincent <rabin@rab.in> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06Merge tag 'wireless-drivers-next-for-davem-2016-01-05' of ↵David S. Miller184-1884/+3889
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== brcfmac * fix IBSS which got broken over time * new USB id for bcm43242 dongle * arp offload configuration through inet notifier ath9k * add random number generator support (CONFIG_ATH9K_HWRNG) iwlwifi * Make scan parameters low latency aware * Fix in the NL80211_FEATURE_FULL_AP_CLIENT_STATE state case * Fix enable injection mode (Chaya Rachel) * Various cleanups (Dan / Julia / myself) * Allow to stay more time on popular channels (David Spinadel) * Bug fixes for D0i3 (Eliad / Luca) * Fixes for GO uAPSD (myself) * Start of TSO support (myself) * Rate control bug fixes (Eyal / Gregory) * Start the work on 9000 devices (Johannes / Sara / Oren) * Start the work on a new Tx queue allocation model (Liad) * Debug infrastructure enhancements (Golan) mwifiex * add a debugfs file for chip reset * advertise SMS4 cipher suite * increase ap and station interface limit to 3 * enable MSI support on newer pcie devices (8897 onwards) rtlwifi * fix lots of module parameter usage ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06net: hns: avoid uninitialized variable warning:Arnd Bergmann1-25/+22
gcc fails to see that the use of the 'last_offset' variable in hns_nic_reuse_page() is used correctly and issues a bogus warning: drivers/net/ethernet/hisilicon/hns/hns_enet.c: In function 'hns_nic_reuse_page': drivers/net/ethernet/hisilicon/hns/hns_enet.c:541:6: warning: 'last_offset' may be used uninitialized in this function [-Wmaybe-uninitialized] This simplifies the function to make it more obvious what is going on to both readers and compilers, which makes the warning go away. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05inet: kill unused skb_free opFlorian Westphal5-13/+1
The only user was removed in commit 029f7f3b8701cc7a ("netfilter: ipv6: nf_defrag: avoid/free clone operations"). Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05bridge: Only call /sbin/bridge-stp for the initial network namespaceHannes Frederic Sowa1-1/+4
[I stole this patch from Eric Biederman. He wrote:] > There is no defined mechanism to pass network namespace information > into /sbin/bridge-stp therefore don't even try to invoke it except > for bridge devices in the initial network namespace. > > It is possible for unprivileged users to cause /sbin/bridge-stp to be > invoked for any network device name which if /sbin/bridge-stp does not > guard against unreasonable arguments or being invoked twice on the > same network device could cause problems. [Hannes: changed patch using netns_eq] Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-24 17:16:36 +0000