summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2013-07-03fork: reorder permissions when violating number of processes limitsEric Paris1-2/+2
When a task is attempting to violate the RLIMIT_NPROC limit we have a check to see if the task is sufficiently priviledged. The check first looks at CAP_SYS_ADMIN, then CAP_SYS_RESOURCE, then if the task is uid=0. A result is that tasks which are allowed by the uid=0 check are first checked against the security subsystem. This results in the security subsystem auditting a denial for sys_admin and sys_resource and then the task passing the uid=0 check. This patch rearranges the code to first check uid=0, since if we pass that we shouldn't hit the security system at all. We then check sys_resource, since it is the smallest capability which will solve the problem. Lastly we check the fallback everything cap_sysadmin. We don't want to give this capability many places since it is so powerful. This will eliminate many of the false positive/needless denial messages we get when a root task tries to violate the nproc limit. (note that kthreads count against root, so on a sufficiently large machine we can actually get past the default limits before any userspace tasks are launched.) Signed-off-by: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03fs/proc/kcore.c: using strlcpy() instead of strncpy()Zhao Hongjiang1-1/+1
For NUL terminated string, set '\0' at the end. Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03fs/proc/uptime.c:uptime_proc_show(): use get_monotonic_boottime()Oleg Nesterov1-2/+1
Change uptime_proc_show() to use get_monotonic_boottime() instead of do_posix_clock_monotonic_gettime() + monotonic_to_bootbased(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Tomas Janousek <tjanouse@redhat.com> Cc: Tomas Smetana <tsmetana@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03exit.c: unexport __set_special_pids()Oleg Nesterov3-14/+12
Move __set_special_pids() from exit.c to sys.c close to its single caller and make it static. And rename it to set_special_pids(), another helper with this name has gone away. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03fs/exec.c:de_thread(): use change_pid() rather than detach_pid/attach_pidOleg Nesterov1-2/+1
de_thread() can use change_pid() instead of detach + attach. This looks better and this ensures that, say, next_thread() can never see a task with ->pid == NULL. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Sergey Dyasly <dserrg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03coredump: '% at the end' shouldn't bypass core_uses_pid logicOleg Nesterov1-5/+7
"goto end" should not bypass the "Backward compatibility with core_uses_pid" code, move this label up. While at it, - It is ugly to copy '|' into cn->corename and then inc the pointer for argv_split(). Change format_corename() to increment pat_ptr instead. - Remove the dead "if (*pat_ptr == 0)" in format_corename(), we already checked it is not zero. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Colin Walters <walters@verbum.org> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Lennart Poettering <mzxreary@0pointer.de> Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03coredump: kill call_count, add core_name_sizeOleg Nesterov1-9/+10
Imho, "atomic_t call_count" is ugly and should die. It buys nothing and in fact it can grow more than necessary, expand doesn't check if it was already incremented by another task. Kill it, and introduce "static int core_name_size" updated by expand_corename(). This is obviously racy too but harmless, and core_name_size never grows for no reason. We do not bother to to calculate the "right" new size, we simply do kmalloc(size_we_need) and use ksize() to rely on kmalloc_index's decision. Finally change format_corename() to use expand_corename(), krealloc(NULL) is fine. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Colin Walters <walters@verbum.org> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Lennart Poettering <mzxreary@0pointer.de> Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03coredump: kill cn_escape(), introduce cn_esc_printf()Oleg Nesterov1-23/+21
The usage of cn_escape() looks really annoying, imho this sequence needs a wrapper. And it is buggy. If cn_printf() does expand_corename() cn_escape() writes to the freed memory. Introduce cn_esc_printf() which hopefully does this all right. It records the index before cn_vprintf(), not "char *" which is no longer valid (in general) after krealloc(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Colin Walters <walters@verbum.org> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Lennart Poettering <mzxreary@0pointer.de> Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03coredump: cn_vprintf() has no reason to call vsnprintf() twiceOleg Nesterov1-18/+12
cn_vprintf() looks really overcomplicated and sub-optimal. We do not need vsnprintf(NULL) to calculate the size we need, we can simply try to print into the current buffer and expand/retry only if necessary. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Colin Walters <walters@verbum.org> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Lennart Poettering <mzxreary@0pointer.de> Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03coredump: introduce cn_vprintf()Oleg Nesterov1-7/+13
Turn cn_printf(...) into cn_vprintf(va_list args), reintroduce cn_printf() as a trivial wrapper. This simplifies the next change and cn_vprintf() will have more callers. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Colin Walters <walters@verbum.org> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Lennart Poettering <mzxreary@0pointer.de> Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03coredump: format_corename() can leak cn->corenameOleg Nesterov1-11/+7
do_coredump() assumes that format_corename() can only fail if expand_corename() fails and frees cn->corename. This is not true, for example cn_print_exe_file() can fail and in this case nobody frees cn->corename. Change do_coredump() to always do kfree(cn->corename) after it calls format_corename() (NULL is fine), change expand_corename() to do nothing if kmalloc() fails. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Colin Walters <walters@verbum.org> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Lennart Poettering <mzxreary@0pointer.de> Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03usermodehelper: kill the sub_info->path[0] checkOleg Nesterov1-8/+3
call_usermodehelper_exec() does nothing but returns success if path[0] == 0. The only user which needs this strange feature is request_module(), it can check modprobe_path[0] itself like other users do if they want to detect the "disabled by admin" case. Kill it. Not only it looks strange, it can confuse other callers. And this allows us to revert 264b83c0 ("usermodehelper: check subprocess_info->path != NULL"), do_execve(NULL) is safe. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03signals: eventpoll: do not use sigprocmask()Oleg Nesterov1-6/+6
sigprocmask() should die. None of the current callers actually need this strange interface. Change fs/eventpoll.c to use set_current_blocked(). This also means we should not worry about SIGKILL/SIGSTOP. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eric Wong <normalperson@yhbt.net> Cc: Jason Baron <jbaron@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ptrace: add ability to get/set signal-blocked maskAndrey Vagin2-2/+45
crtools uses a parasite code for dumping processes. The parasite code is injected into a process with help PTRACE_SEIZE. Currently crtools blocks signals from a parasite code. If a process has pending signals, crtools wait while a process handles these signals. This method is not suitable for stopped tasks. A stopped task can have a few pending signals, when we will try to execute a parasite code, we will need to drop SIGSTOP, but all other signals must remain pending, because a state of processes must not be changed during checkpointing. This patch adds two ptrace commands to set/get signal-blocked mask. I think gdb can use this commands too. [akpm@linux-foundation.org: be consistent with brace layout] Signed-off-by: Andrey Vagin <avagin@openvz.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03x86: kill TIF_DEBUGOleg Nesterov1-3/+1
Because it is not used. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03docbook: add futexes to kernel-locking docbookRandy Dunlap1-1/+6
Add Fast User Mutexes (futexes) to kernel-locking docbook. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03Documentation/CodingStyle: allow multiple return statements per functionDan Carpenter1-1/+2
A surprising number of newbies interpret this section to mean that only one return statement is allowed per function. Part of the problem is that the "one return statement per function" rule is an actual style guideline that people are used to from other projects. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Eduardo Valentin <eduardo.valentin@ti.com> Cc: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03fs/fat: use fat_msg() to replace printk() in __fat_fs_error()Gu Zheng1-3/+2
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03] nilfs2: use atomic64_t type for inodes_count and blocks_count fields in ↵Vyacheslav Dubeyko6-14/+16
nilfs_root struct The cp_inodes_count and cp_blocks_count are represented as __le64 type in on-disk structure (struct nilfs_checkpoint). But analogous fields in in-core structure (struct nilfs_root) are represented by atomic_t type. This patch replaces atomic_t on atomic64_t type in representation of inodes_count and blocks_count fields in struct nilfs_root. Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by: Joern Engel <joern@logfs.org> Cc: Clemens Eisserer <linuxhippy@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03nilfs2: implement calculation of free inodes countVyacheslav Dubeyko5-2/+112
Currently, NILFS2 returns 0 as free inodes count (f_ffree) and current used inodes count as total file nodes in file system (f_files): df -i Filesystem Inodes IUsed IFree IUse% Mounted on /dev/loop0 2 2 0 100% /mnt/nilfs2 This patch implements real calculation of free inodes count. First of all, it is calculated total file nodes in file system as (desc_blocks_count * groups_per_desc_block * entries_per_group). Then, it is calculated free inodes count as difference the total file nodes and used inodes count. As a result, we have such output for NILFS2: df -i Filesystem Inodes IUsed IFree IUse% Mounted on /dev/loop0 4194304 2114701 2079603 51% /mnt/nilfs2 Reported-by: Clemens Eisserer <linuxhippy@gmail.com> Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Joern Engel <joern@logfs.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-sirfsoc.c: add rtc drivers for CSR SiRFprimaII and SiRFatlasVIXianglong Du5-2/+485
On CSR SiRFprimaII/atlasVI, there is a programmable 16-bit divider (RTC_DIV) that divides the input 32.768KHz clock to the frequency that users need (E.g. 1 Hz). The divided real-time clock will be used to drive a 32-bit counter (RTC_COUNTER) that provides users with the actual time. In each cycle of the divided real-time clock, there is a Hertz interrupt generated to the RISC. Users can also configure an alarm (RTC_ALARM). When RTC_COUNTER matches the alarm, there will be an alarm interrupt generated to the RISC. The system RTC can generate an alarm wake-up signal to notify the power controller to wake up from power saving mode. Signed-off-by: Xianglong Du <Xianglong.Du@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-ds1216.c: use module_platform_driver_probe()Fabio Porcedda1-12/+1
Use module_platform_driver_probe() macro which makes the code smaller and simpler. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03rtc: omap: restore back (hard-code) wakeup supportHebbar Gururaja1-0/+2
rtc-omap driver modules is used both by OMAP1/2, Davinci SoC platforms. However, rtc wake support on OMAP1 is broken. Hence the device_init_wakeup() was removed from rtc-omap driver and moved to platform board files that supported it (DA850/OMAP-L138). [1] However, recently [2] it was suggested that driver should always do a device_init_wakeup(dev, true). Platforms that don't want/need wakeup support can disable it from userspace via: echo disabled > /sys/devices/.../power/wakeup Also, with the new DT boot-up, board file doesn't exist and hence there is no way to have device wakeup support rtc. The fix for above issues, is to hard code device_init_wakeup() inside driver and let platforms that don't need this, handle it through the sysfs power entry. [1] https://patchwork.kernel.org/patch/136731/ [2] http://www.mail-archive.com/davinci-linux-open-source@linux. davincidsp.com/msg26077.html Signed-off-by: Hebbar Gururaja <gururaja.hebbar@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03rtc: add NXP PCF2127 support (i2c)Renaud Cerrato3-0/+251
Added support for NXP PCF2127 RTC (i2c). [akpm@linux-foundation.org: fix typo, fix warnings] Signed-off-by: Renaud Cerrato <r.cerrato@til-technologies.fr> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-palmas.c: init wakeup before device registerWei Ni1-1/+1
Enable dev as wakeup device before calling rtc_device_register(), so that it can create the "wakealarm" sysfs. Signed-off-by: Wei Ni <wni@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/class: convert from Legacy pm ops to dev_pm_opsShuah Khan1-6/+6
Convert drivers/rtc/class to use dev_pm_ops for power management and remove Legacy PM ops hooks. With this change, rtc class registers suspend/resume callbacks via class->pm (dev_pm_ops) instead of Legacy class->suspend/resume. When __device_suspend() runs call-backs, it will find class->pm ops for the rtc class. Signed-off-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Shuah Khan <shuahkhan@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-pcf2123.c: replace strict_strtoul() with kstrtoul()Jingoo Han1-5/+10
The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/interface.c: return -EBUSY, not -EACCES when device is busyChris Brand1-4/+4
If rtc->irq_task is non-NULL and task is NULL, they always rtc_irq_set_freq(), whenever err is set to -EBUSY it will then immediately be set to -EACCES, misleading the caller as to the underlying problem. Signed-off-by: Chris Brand <chris.brand@broadcom.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-twl.c: cleanup with module_platform_driver() conversionPeter Ujfalusi1-11/+1
Use module_platform_driver() to register the platform driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-twl.c: fix rtc_reg_map initializationPeter Ujfalusi1-5/+6
Initialize the rtc_reg_map in platform_driver's probe function instead at module_init time. This way we can make sure that the twl-core has been already probed and initialized (twl_priv->twl_id is valid) since the platform device for the RTC driver will be created by the twl-core after it finished its init. Reported-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-cmos.c: work around bios clearing rtc controlDerek Basehore1-13/+22
The bios may clear the rtc control register when resuming the system. Since the cmos interrupt handler may now be run before the rtc_cmos is resumed, this can cause the interrupt handler to ignore an alarm since the alarm bit is not set in the rtc control register. To work around this, check if the rtc_cmos is suspended and use the stored value for the rtc control register. Signed-off-by: Derek Basehore <dbasehore@chromium.org> Reviewed-by: Sameer Nanda <snanda@chromium.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-twl.c: ensure IRQ is wakeup enabledKevin Hilman1-2/+14
Currently, the RTC IRQ is never wakeup-enabled so is not capable of bringing the system out of suspend. On OMAP platforms, we have gotten by without this because the TWL RTC is on an I2C-connected chip which is capable of waking up the OMAP via the IO ring when the OMAP is in low-power states. However, if the OMAP suspends without hitting the low-power states (and the IO ring is not enabled), RTC wakeups will not work because the IRQ is not wakeup enabled. To fix, ensure the RTC IRQ is wakeup enabled whenever the RTC alarm is set. Signed-off-by: Kevin Hilman <khilman@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-pcf8583.c: use PTR_RET()Sachin Kamat1-4/+2
Use of PTR_RET() simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-pcf8563.c: use PTR_RET()Sachin Kamat1-4/+2
Use of PTR_RET() simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-m48t35.c: use PTR_RET()Sachin Kamat1-4/+2
Use of PTR_RET() simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-isl12022.c: use PTR_RET()Sachin Kamat1-4/+2
Use of PTR_RET() simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Roman Fietze <roman.fietze@telemotive.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-da9052.c: use PTR_RET()Sachin Kamat1-4/+2
Use of PTR_RET() simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-mpc5121.c: use platform_{get,set}_drvdata()Jingoo Han1-2/+2
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-ds1302.c: handle write protectionSergey Yanovich1-0/+7
This chip has a control register and can prevent altering saved clock. Without this patch we could have: (arm)root@pac14:~# date Tue May 21 03:08:27 MSK 2013 (arm)root@pac14:~# /etc/init.d/hwclock.sh show Tue May 21 11:13:58 2013 -0.067322 seconds (arm)root@pac14:~# /etc/init.d/hwclock.sh stop [info] Saving the system clock. [info] Hardware Clock updated to Tue May 21 03:09:01 MSK 2013. (arm)root@pac14:~# /etc/init.d/hwclock.sh show Tue May 21 11:14:15 2013 -0.624272 seconds The patch enables write access to rtc before the driver tries to write time and re-disables when time data is written. Signed-off-by: Sergey Yanovich <ynvich@gmail.com> Acked-by: Marc Zyngier <maz@misterjones.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sachin Kamat <sachin.kamat@linaro.org> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-ab8500.c: add second resolution to rtc driverAlexandre Torgue1-1/+62
Android expects the RTC to have second resolution. On ab8540 cut2 RTC block has a new register which allows setting seconds for wakeup alarms. Existing registers (minutes hi, mid and low) have seen their offsets changed. Here is the new mapping: * AlarmSec (A) 0x22 * AlarmMinLow (M) from 0x8 to 0x23 * AlarmMinMid (M) from 0x9 to 0x24 * AlarmMinHigh (M) from 0xA to 0x25 Signed-off-by: Julien Delacou <julien.delacou@stericsson.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-wm831x.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-tps80031.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-sun4v.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-starfire.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-snvs.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-rx8581.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Martyn Welch <martyn.welch@ge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-rs5c348.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-rx4581.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Torben Hohn <torbenh@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-rv3029c2.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Gregory Hermant <gregory.hermant@calao-systems.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-rs5c313.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 12:26:37 +0000