summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2011-09-20powerpc: Use for_each_node_by_type instead of open coding itAnton Blanchard3-8/+7
Use for_each_node_by_type instead of open coding it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/numa: Remove double of_node_put in hot_add_node_scn_to_nidAnton Blanchard1-1/+2
During memory hotplug testing, I got the following warning: ERROR: Bad of_node_put() on /memory@0 of_node_release kref_put of_node_put of_find_node_by_type hot_add_node_scn_to_nid hot_add_scn_to_nid memory_add_physaddr_to_nid ... of_find_node_by_type() loop does the of_node_put for us so we only need the handle the case where we terminate the loop early. As suggested by Stephen Rothwell we can do the of_node_put unconditionally outside of the loop since of_node_put handles a NULL argument fine. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: stable@kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/numa: Remove duplicate RECLAIM_DISTANCE definitionAnton Blanchard1-10/+0
We have two identical definitions of RECLAIM_DISTANCE, looks like the patch got applied twice. Remove one. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/numa: Disable NEWIDLE balancing at node levelAnton Blanchard1-1/+1
On big POWER7 boxes we see large amounts of CPU time in system processes like workqueue and watchdog kernel threads. We currently rebalance the entire machine each time a task goes idle and this is very expensive on large machines. Disable newidle balancing at the node level and rely on the scheduler tick to rebalance across nodes. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/numa: Increase SD_NODES_PER_DOMAIN to 32.Anton Blanchard1-0/+6
The largest POWER7 boxes have 32 nodes. SD_NODES_PER_DOMAIN groups nodes into chunks of 16 and adds a global balancing domain (SD_ALLNODES) above it. If we bump SD_NODES_PER_DOMAIN to 32, then we avoid this extra level of balancing on our largest boxes. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20sched: Allow SD_NODES_PER_DOMAIN to be overriddenAnton Blanchard2-2/+4
We want to override the default value of SD_NODES_PER_DOMAIN on ppc64, so move it into linux/topology.h. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/numa: Enable SD_WAKE_AFFINE in node definitionAnton Blanchard1-1/+1
When chasing a performance issue on ppc64, I noticed tasks communicating via a pipe would often end up on different nodes. It turns out SD_WAKE_AFFINE is not set in our node defition. Commit 9fcd18c9e63e (sched: re-tune balancing) enabled SD_WAKE_AFFINE in the node definition for x86 and we need a similar change for ppc64. I used lmbench lat_ctx and perf bench pipe to verify this fix. Each benchmark was run 10 times and the average taken. lmbench lat_ctx: before: 66565 ops/sec after: 204700 ops/sec 3.1x faster perf bench pipe: before: 5.6570 usecs after: 1.3470 usecs 4.2x faster Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20Merge remote-tracking branch 'origin/master' into nextBenjamin Herrenschmidt331-2345/+3499
(Merge in order to get the PCIe mps/mrss code fixes)
2011-09-19Merge branch 'irq-fixes-for-linus' of git://tesla.tglx.de/git/linux-2.6-tipLinus Torvalds2-2/+2
* 'irq-fixes-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip: x86, iommu: Mark DMAR IRQ as non-threaded genirq: Make irq_shutdown() symmetric vs. irq_startup again
2011-09-19Merge branch 'for-linus' of git://github.com/chrismason/linuxLinus Torvalds3-11/+30
* 'for-linus' of git://github.com/chrismason/linux: Btrfs: only clear the need lookup flag after the dentry is setup BTRFS: Fix lseek return value for error Btrfs: don't change inode flag of the dest clone file Btrfs: don't make a file partly checksummed through file clone Btrfs: fix pages truncation in btrfs_ioctl_clone() btrfs: fix d_off in the first dirent
2011-09-19USB: xHCI: prevent infinite loop when processing MSE eventAndiry Xu1-0/+19
When a xHC host is unable to handle isochronous transfer in the interval, it reports a Missed Service Error event and skips some tds. Currently xhci driver handles MSE event in the following ways: 1. When encounter a MSE event, set ep->skip flag, update event ring dequeue pointer and return. 2. When encounter the next event on this ep, the driver will run the do-while loop, fetch td from ep's td_list to find the td corresponding to this event. All tds missed are marked as short transfer(-EXDEV). The do-while loop will end in two ways: 1. If the td pointed by the event trb is found; 2. If the ep ring's td_list is empty. However, if a buggy HW reports some unpredicted event (for example, an overrun event following a MSE event while the ep ring is actually not empty), the driver will never find the td, and it will loop until the td_list is empty. Unfortunately, the spinlock is dropped when give back a urb in the do-while loop. During the spinlock released period, the class driver may still submit urbs and add tds to the td_list. This may cause disaster, since the td_list will never be empty and the loop never ends, and the system hangs. To fix this, count the number of TDs on the ep ring before skipping TDs, and quit the loop when skipped that number of tds. This guarantees the do-while loop will end after certain number of cycles, and driver will not be trapped in an infinite loop. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-19USB: xhci: Set change bit when warm reset change is set.Greg KH1-1/+1
Sometimes, when a USB 3.0 device is disconnected, the Intel Panther Point xHCI host controller will report a link state change with the state set to "SS.Inactive". This causes the xHCI host controller to issue a warm port reset, which doesn't finish before the USB core times out while waiting for it to complete. When the warm port reset does complete, and the xHC gives back a port status change event, the xHCI driver kicks khubd. However, it fails to set the bit indicating there is a change event for that port because the logic in xhci-hub.c doesn't check for the warm port reset bit. After that, the warm port status change bit is never cleared by the USB core, and the xHC stops reporting port status change bits. (The xHCI spec says it shouldn't report more port events until all change bits are cleared.) This means any port changes when a new device is connected will never be reported, and the port will seem "dead" until the xHCI driver is unloaded and reloaded, or the computer is rebooted. Fix this by making the xHCI driver set the port change bit when a warm port reset change bit is set. A better solution would be to make the USB core handle warm port reset in differently, merging the current code with the standard port reset code that does an incremental backoff on the timeout, and tries to complete the port reset two more times before giving up. That more complicated fix will be merged next window, and this fix will be backported to stable. This should be backported to kernels as old as 3.0, since that was the first kernel with commit a11496ebf375 ("xHCI: warm reset support"). Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-19staging: fix comedi build when ISA_DMA_API is enabled but COMEDI_PCI is not ↵Randy Dunlap1-1/+3
enabled Fix build when CONFIG_ISA_DMA_API is enabled but CONFIG_COMEDI_PCI[_DRIVERS] is not enabled. Fixes these build errors: drivers/staging/comedi/drivers/ni_labpc.c: In function 'labpc_ai_cmd': drivers/staging/comedi/drivers/ni_labpc.c:1351: error: implicit declaration of function 'labpc_suggest_transfer_size' drivers/staging/comedi/drivers/ni_labpc.c: At top level: drivers/staging/comedi/drivers/ni_labpc.c:1802: error: conflicting types for 'labpc_suggest_transfer_size' drivers/staging/comedi/drivers/ni_labpc.c:1351: note: previous implicit declaration of 'labpc_suggest_transfer_size' was here Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-19Make taskstats round statistics down to nearest 1k bytes/eventsLinus Torvalds1-7/+8
Even with just the interface limited to admin, there really is little to reason to give byte-per-byte counts for taskstats. So round it down to something less intrusive. Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-19Make TASKSTATS require root accessLinus Torvalds1-0/+1
Ok, this isn't optimal, since it means that 'iotop' needs admin capabilities, and we may have to work on this some more. But at the same time it is very much not acceptable to let anybody just read anybody elses IO statistics quite at this level. Use of the GENL_ADMIN_PERM suggested by Johannes Berg as an alternative to checking the capabilities by hand. Reported-by: Vasiliy Kulikov <segoon@openwall.com> Cc: Johannes Berg <johannes.berg@intel.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-20powerpc/ps3: Add gelic udbg driverHector Martin8-0/+306
Add a new udbg driver for the PS3 gelic Ehthernet device. This driver shares only a few stucture and constant definitions with the gelic Ethernet device driver, so is implemented as a stand-alone driver with no dependencies on the gelic Ethernet device driver. Signed-off-by: Hector Martin <hector@marcansoft.com> Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/eeh: Fix /proc/ppc64/eeh creationThadeu Lima de Souza Cascardo1-1/+1
Since commit 188917e183cf9ad0374b571006d0fc6d48a7f447, /proc/ppc64 is a symlink to /proc/powerpc/. That means that creating /proc/ppc64/eeh will end up with a unaccessible file, that is not listed under /proc/powerpc/ and, then, not listed under /proc/ppc64/. Creating /proc/powerpc/eeh fixes that problem and maintain the compatibility intended with the ppc64 symlink. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: <stable@kernel.org> [3.x]
2011-09-20powerpc/xics: Add __init to marker icp_native_init()Arnaud Lacombe1-1/+1
This should fix the following warning: LD arch/powerpc/sysdev/xics/built-in.o WARNING: arch/powerpc/sysdev/xics/built-in.o(.text+0x1310): Section mismatch in reference from the function .icp_native_init() to the function .init.text:.icp_native_init_one_node() The function .icp_native_init() references the function __init .icp_native_init_one_node(). This is often because .icp_native_init lacks a __init annotation or the annotation of .icp_native_init_one_node is wrong. icp_native_init() is only referenced in `arch/powerpc/sysdev/xics/xics-common.c' by xics_init() which is itself marked with __init. = not built-tested = Reported-by: Timur Tabi <timur@freescale.com> Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/pseries: Avoid spurious error during hotplug CPU addAnton Blanchard1-0/+4
During hotplug CPU add we get the following error: Unexpected Error (0) returned from configure-connector ibm,configure-connector returns 0 for configuration complete, so catch this and avoid the error. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: <stable@kernel.org>
2011-09-20powerpc/mm: Fix the call trace when resumed from hibernationTang Yuantian1-1/+1
In SMP mode, the kernel would produce call trace when resumed from hibernation. The reason is when the function destroy_context is called to drop the resuming mm context, the mm->context.active is 1 which is wrong and should be zero. We pass the current->active_mm as previous mm context to function switch_mmu_context to decrease the context.active by 1. In UP mode, there is no effect. Signed-off-by: Tang Yuantian <b29983@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/4xx/pci: Add __init annotations for *init_port_hw() functions.Tony Breeds1-6/+6
The various port_init_hw methods of ppc4xx_pciex_hwops should have been marked __init and when I added ppc4xx_pciex_port_reset_sdr(), which is __init. This added many section mismatch warnings like: WARNING: arch/powerpc/sysdev/built-in.o(.text+0x5c68): Section mismatch in reference from the function ppc440spe_pciex_init_port_hw() to the function .init.text:ppc4xx_pciex_port_reset_sdr() The function ppc440spe_pciex_init_port_hw() references the function __init ppc4xx_pciex_port_reset_sdr(). This is often because ppc440spe_pciex_init_port_hw lacks a __init annotation or the annotation of ppc4xx_pciex_port_reset_sdr is wrong. Trivial patch to silence those warnings. Reported-By: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Yours Tony Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/wsp: Add MSI support for PCI on PowerENMichael Ellerman5-0/+175
Based on a patch by Michael Ellerman <michael@ellerman.id.au> Patch was simply forward ported upstream. Jimi Xenidis <jimix@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/wsp: Add PCIe Root support to PowerEN/WSPBenjamin Herrenschmidt6-0/+1412
Based on a patch by Benjamin Herrenschmidt <benh@kernel.crashing.org> Modernized and slightly modified to not record erros into the nvram log since we do not have that device driver just yet. Jimi Xenidis <jimix@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/wsp: Fix Wire Speed Processor platform configsJimi Xenidis1-4/+4
Some config selections were applied to the platform (reference board) when they actuall apply to the chip. Signed-off-by: Jimi Xenidis <jimix@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20pseries/iommu: Add missing kfreeJulia Lawall1-2/+5
At this point, window has not been stored anywhere, so it has to be freed before leaving the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ local idexpression x; statement S,S1; expression E; identifier fl; expression *ptr != NULL; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...kfree(x)...+> } when any when != true x == NULL x->fl ...> ( if (x == NULL) S1 | if (...) { ... when != x when forall ( return \(0\|<+...x...+>\|ptr\); | * return ...; ) } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/32: Pass device tree address as u64 to machine_initScott Wood6-56/+39
u64 is used rather than phys_addr_t to keep things simple, as this is called from assembly code. Update callers to pass a 64-bit address in r3/r4. Other unused register assignments that were once parameters to machine_init are dropped. For FSL BookE, look up the physical address of the device tree from the effective address passed in r3 by the loader. This is required for situations where memory does not start at zero (due to AMP or IOMMU-less virtualization), and thus the IMA doesn't start at zero, and thus the device tree effective address does not equal the physical address. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/nvram: Add compression to fit more oops output into NVRAMJim Keniston3-9/+169
Capture more than twice as much text from the printk buffer, and compress it to fit it in the lnx,oops-log NVRAM partition. You can view the compressed text using the new (as of July 20) --unzip option of the nvram command in the powerpc-utils package. [BenH: Added select of ZLIB_DEFLATE] Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc: Fix build dependencies for epapr.c which needs libfdt.hMatthew McClintock1-1/+1
Currently, the build can (very rarely) fail to build because libfdt.h has not been created or is in the process of being copied. Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/mpic: Add support for discontiguous coresTimur Tabi2-11/+15
There is one place in the MPIC driver that assumes that the cores are numbered from 0 to n-1. However, this is not true if the CPUs are not numbered sequentially. This can happen on a eight-core SOC where cores two and three are removed in the device tree. So instead of blindly looping, we iterate over the discovered CPUs and use the SMP ID as the index. This means that we no longer ask the MPIC how many CPUs there are, so we also delete mpic->num_cpus. We also catch if the number of CPUs in the SOC exceeds the number that the MPIC supports. This should never happen, of course, but it's good to be sure. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc: Hugetlb for BookEBecky Bruce20-106/+766
Enable hugepages on Freescale BookE processors. This allows the kernel to use huge TLB entries to map pages, which can greatly reduce the number of TLB misses and the amount of TLB thrashing experienced by applications with large memory footprints. Care should be taken when using this on FSL processors, as the number of large TLB entries supported by the core is low (16-64) on current processors. The supported set of hugepage sizes include 4m, 16m, 64m, 256m, and 1g. Page sizes larger than the max zone size are called "gigantic" pages and must be allocated on the command line (and cannot be deallocated). This is currently only fully implemented for Freescale 32-bit BookE processors, but there is some infrastructure in the code for 64-bit BooKE. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20serial/8250: Move UPIO_TSI to powerpcArnd Bergmann2-23/+25
This iotype is only used by the legacy_serial code in powerpc, so the code should live there, rather than be compiled in for every 8250 driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: linux-serial@vger.kernel.org Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc: Tidy up dma_map_ops after adding new hookMilton Miller4-29/+29
The new get_required_mask hook name is longer than many of but not all of the prior ops. Tidy the struct initializers to align the equal signs using the local whitespace. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Cc: benh@kernel.crashing.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc: Use the newly added get_required_mask dma_map_ops hookMilton Miller10-34/+68
Now that the generic code has dma_map_ops set, instead of having a messy ifdef & if block in the base dma_get_required_mask hook push the computation into the dma ops. If the ops fails to set the get_required_mask hook default to the width of dma_addr_t. This also corrects ibmbus ibmebus_dma_supported to require a 64 bit mask. I doubt anything is checking or setting the dma mask on that bus. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Cc: benh@kernel.crashing.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20dma-mapping: Add get_required_mask if arch overrides defaultMilton Miller1-0/+3
If an architecture sets ARCH_HAS_DMA_GET_REQUIRED_MASK and has settable dma_map_ops, the required mask may change by the ops implementation. For example, a system that always has an mmu inline may only require 32 bits while a swiotlb would desire bits to cover all of memory. Therefore add the field if the architecture does not use the generic definition of dma_get_required_mask. The first use will by by powerpc. Note that this does add some dependency on the order in which files are visible here. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2011-09-19Merge branch 'slab/urgent' of git://github.com/penberg/linuxLinus Torvalds1-1/+1
* 'slab/urgent' of git://github.com/penberg/linux: slub: add slab with one free object to partial list tail
2011-09-19Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds10-42/+51
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms: Make GPU/CPU page size handling consistent in blit code (v2) drm/radeon/kms: fix typo in r100_blit_copy drm/radeon: Unreference GEM object outside of spinlock in page flip error path. drm/radeon: Don't read from CP ring write pointer registers. drm/ttm: request zeroed system memory pages for new TT buffer objects
2011-09-19Merge git://github.com/davem330/netLinus Torvalds2-2/+19
* git://github.com/davem330/net: tcp: fix validation of D-SACK tcp: fix build error if !CONFIG_SYN_COOKIES
2011-09-18tcp: fix validation of D-SACKZheng Yan1-1/+1
D-SACK is allowed to reside below snd_una. But the corresponding check in tcp_is_sackblock_valid() is the exact opposite. It looks like a typo. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-18tcp: fix build error if !CONFIG_SYN_COOKIESEric Dumazet1-1/+18
commit 946cedccbd7387 (tcp: Change possible SYN flooding messages) added a build error if CONFIG_SYN_COOKIES=n Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-18Merge branch 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6Linus Torvalds6-5/+15
* 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6: mfd: Fix omap-usb-host build failure mfd: Make omap-usb-host TLL mode work again mfd: Set MAX8997 irq pointer mfd: Fix initialisation of tps65910 interrupts mfd: Check for twl4030-madc NULL pointer mfd: Copy the device pointer to the twl4030-madc structure mfd: Rename wm8350 static gpio_set_debounce() mfd: Fix value of WM8994_CONFIGURE_GPIO
2011-09-18drm/radeon/kms: Make GPU/CPU page size handling consistent in blit code (v2)Alex Deucher7-24/+34
The BO blit code inconsistenly handled the page size. This wasn't an issue on system with 4k pages since the GPU's page size is 4k as well. Switch the driver blit callbacks to take num pages in GPU page units. Fixes lemote mipsel systems using AMD rs780/rs880 chipsets. v2: incorporate suggestions from Michel. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-18drm/radeon/kms: fix typo in r100_blit_copyAlex Deucher1-2/+2
cur_pages is the number of pages per loop iteration. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-18Merge git://github.com/davem330/netLinus Torvalds68-507/+826
* git://github.com/davem330/net: (62 commits) ipv6: don't use inetpeer to store metrics for routes. can: ti_hecc: include linux/io.h IRDA: Fix global type conflicts in net/irda/irsysctl.c v2 net: Handle different key sizes between address families in flow cache net: Align AF-specific flowi structs to long ipv4: Fix fib_info->fib_metrics leak caif: fix a potential NULL dereference sctp: deal with multiple COOKIE_ECHO chunks ibmveth: Fix checksum offload failure handling ibmveth: Checksum offload is always disabled ibmveth: Fix issue with DMA mapping failure ibmveth: Fix DMA unmap error pch_gbe: support ML7831 IOH pch_gbe: added the process of FIFO over run error pch_gbe: fixed the issue which receives an unnecessary packet. sfc: Use 64-bit writes for TX push where possible Revert "sfc: Use write-combining to reduce TX latency" and follow-ups bnx2x: Fix ethtool advertisement bnx2x: Fix 578xx link LED bnx2x: Fix XMAC loopback test ...
2011-09-18Btrfs: only clear the need lookup flag after the dentry is setupJosef Bacik1-2/+11
We can race with readdir and the RCU path walking stuff. This is because we clear the need lookup flag before actually instantiating the inode. This will lead the RCU path walk stuff to find a dentry it thinks is valid without a d_inode attached. So instead unhash the dentry when we first start the lookup, and then clear the flag after we've instantiated the dentry so we're garunteed to either try the slow lookup, or have the d_inode set properly. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-18BTRFS: Fix lseek return value for errorJeff Liu1-2/+7
The recent reworking of btrfs' lseek lead to incorrect values being returned. This adds checks for seeking beyond EOF in SEEK_HOLE and makes sure the error values come back correct. Andi Kleen also sent in similar patches. Signed-off-by: Jie Liu <jeff.liu@oracle.com> Reported-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-18Merge branch 'btrfs-3.0' into for-linusChris Mason2-7/+12
2011-09-18Btrfs: don't change inode flag of the dest clone fileLi Zefan1-1/+0
The dst file will have the same inode flags with dst file after file clone, and I think it's unexpected. For example, the dst file will suddenly become immutable after getting some share of data with src file, if the src is immutable. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-18Btrfs: don't make a file partly checksummed through file cloneLi Zefan1-0/+5
To reproduce the bug: # mount /dev/sda7 /mnt # dd if=/dev/zero of=/mnt/src bs=4K count=1 # umount /mnt # mount -o nodatasum /dev/sda7 /mnt # dd if=/dev/zero of=/mnt/dst bs=4K count=1 # clone_range -s 4K -l 4K /mnt/src /mnt/dst # echo 3 > /proc/sys/vm/drop_caches # cat /mnt/dst # dmesg ... btrfs no csum found for inode 258 start 0 btrfs csum failed ino 258 off 0 csum 2566472073 private 0 It's because part of the file is checksummed and the other part is not, and then btrfs will complain checksum is not found when we read the file. Disallow file clone if src and dst file have different checksum flag, so we ensure a file is completely checksummed or unchecksummed. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-18Btrfs: fix pages truncation in btrfs_ioctl_clone()Li Zefan1-4/+4
It's a bug in commit f81c9cdc567cd3160ff9e64868d9a1a7ee226480 (Btrfs: truncate pages from clone ioctl target range) We should pass the dest range to the truncate function, but not the src range. Also move the function before locking extent state. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-18btrfs: fix d_off in the first direntHidetoshi Seto1-2/+3
Since the d_off in the first dirent for "." (that originates from the 4th argument "offset" of filldir() for the 2nd dirent for "..") is wrongly assigned in btrfs_real_readdir(), telldir returns same offset for different locations. | # mkfs.btrfs /dev/sdb1 | # mount /dev/sdb1 fs0 | # cd fs0 | # touch file0 file1 | # ../test | telldir: 0 | readdir: d_off = 2, d_name = "." | telldir: 2 | readdir: d_off = 2, d_name = ".." | telldir: 2 | readdir: d_off = 3, d_name = "file0" | telldir: 3 | readdir: d_off = 2147483647, d_name = "file1" | telldir: 2147483647 To fix this problem, pass filp->f_pos (which is loff_t) instead. | # ../test | telldir: 0 | readdir: d_off = 1, d_name = "." | telldir: 1 | readdir: d_off = 2, d_name = ".." | telldir: 2 | readdir: d_off = 3, d_name = "file0" : At the moment the "offset" for "." is unused because there is no preceding dirent, however it is better to pass filp->f_pos to follow grammatical usage. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-12 12:57:21 +0000