summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2012-09-26mm, slob: fix build breakage in __kmalloc_node_track_callerDavid Rientjes1-1/+1
On Sat, 8 Sep 2012, Ezequiel Garcia wrote: > @@ -454,15 +455,35 @@ void *__kmalloc_node(size_t size, gfp_t gfp, int node) > gfp |= __GFP_COMP; > ret = slob_new_pages(gfp, order, node); > > - trace_kmalloc_node(_RET_IP_, ret, > + trace_kmalloc_node(caller, ret, > size, PAGE_SIZE << order, gfp, node); > } > > kmemleak_alloc(ret, size, 1, gfp); > return ret; > } > + > +void *__kmalloc_node(size_t size, gfp_t gfp, int node) > +{ > + return __do_kmalloc_node(size, gfp, node, _RET_IP_); > +} > EXPORT_SYMBOL(__kmalloc_node); > > +#ifdef CONFIG_TRACING > +void *__kmalloc_track_caller(size_t size, gfp_t gfp, unsigned long caller) > +{ > + return __do_kmalloc_node(size, gfp, NUMA_NO_NODE, caller); > +} > + > +#ifdef CONFIG_NUMA > +void *__kmalloc_node_track_caller(size_t size, gfp_t gfpflags, > + int node, unsigned long caller) > +{ > + return __do_kmalloc_node(size, gfp, node, caller); > +} > +#endif This breaks Pekka's slab/next tree with this: mm/slob.c: In function '__kmalloc_node_track_caller': mm/slob.c:488: error: 'gfp' undeclared (first use in this function) mm/slob.c:488: error: (Each undeclared identifier is reported only once mm/slob.c:488: error: for each function it appears in.) mm, slob: fix build breakage in __kmalloc_node_track_caller "mm, slob: Add support for kmalloc_track_caller()" breaks the build because gfp is undeclared. Fix it. Acked-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-09-25mm/slab: Fix kmem_cache_alloc_node_trace() declarationEzequiel Garcia1-4/+4
The bug was introduced in commit 4052147c0afa ("mm, slab: Match SLAB and SLUB kmem_cache_alloc_xxx_trace() prototype"). Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-09-25mm/slab: Fix typo _RET_IP -> _RET_IP_Ezequiel Garcia1-1/+1
The bug was introduced by commit 7c0cb9c64f83 ("mm, slab: Replace 'caller' type, void* -> unsigned long"). Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-09-25mm, slub: Rename slab_alloc() -> slab_alloc_node() to match SLABEzequiel Garcia1-9/+15
This patch does not fix anything, and its only goal is to enable us to obtain some common code between SLAB and SLUB. Neither behavior nor produced code is affected. Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-09-25mm, slab: Rename __cache_alloc() -> slab_alloc()Ezequiel Garcia1-7/+7
This patch does not fix anything and its only goal is to produce common code between SLAB and SLUB. Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-09-25mm, slab: Match SLAB and SLUB kmem_cache_alloc_xxx_trace() prototypeEzequiel Garcia2-9/+8
This long (seemingly unnecessary) patch does not fix anything and its only goal is to produce common code between SLAB and SLUB. Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-09-25mm, slab: Replace 'caller' type, void* -> unsigned longEzequiel Garcia1-26/+24
This allows to use _RET_IP_ instead of builtin_address(0), thus achiveing implementation consistency in all three allocators. Though maybe a nitpick, the real goal behind this patch is to be able to obtain common code between SLAB and SLUB. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-09-25mm, slob: Add support for kmalloc_track_caller()Ezequiel Garcia2-5/+28
Currently slob falls back to regular kmalloc for this case. With this patch kmalloc_track_caller() is correctly implemented, thus tracing the specified caller. This is important to trace accurately allocations performed by krealloc, kstrdup, kmemdup, etc. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-09-25mm, slab: Remove silly function slab_buffer_size()Ezequiel Garcia2-15/+2
This function is seldom used, and can be simply replaced with cachep->size. Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-09-25mm, slob: Use NUMA_NO_NODE instead of -1Ezequiel Garcia2-5/+7
Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-09-19mm, sl[au]b: Taint kernel when we detect a corrupted slabDave Jones2-0/+3
It doesn't seem worth adding a new taint flag for this, so just re-use the one from 'bad page' Acked-by: Christoph Lameter <cl@linux.com> # SLUB Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-09-11slab: fix the DEADLOCK issue on l3 alien lockMichael Wang1-3/+3
DEADLOCK will be report while running a kernel with NUMA and LOCKDEP enabled, the process of this fake report is: kmem_cache_free() //free obj in cachep -> cache_free_alien() //acquire cachep's l3 alien lock -> __drain_alien_cache() -> free_block() -> slab_destroy() -> kmem_cache_free() //free slab in cachep->slabp_cache -> cache_free_alien() //acquire cachep->slabp_cache's l3 alien lock Since the cachep and cachep->slabp_cache's l3 alien are in the same lock class, fake report generated. This should not happen since we already have init_lock_keys() which will reassign the lock class for both l3 list and l3 alien. However, init_lock_keys() was invoked at a wrong position which is before we invoke enable_cpucache() on each cache. Since until set slab_state to be FULL, we won't invoke enable_cpucache() on caches to build their l3 alien while creating them, so although we invoked init_lock_keys(), the l3 alien lock class won't change since we don't have them until invoked enable_cpucache() later. This patch will invoke init_lock_keys() after we done enable_cpucache() instead of before to avoid the fake DEADLOCK report. Michael traced the problem back to a commit in release 3.0.0: commit 30765b92ada267c5395fc788623cb15233276f5c Author: Peter Zijlstra <peterz@infradead.org> Date: Thu Jul 28 23:22:56 2011 +0200 slab, lockdep: Annotate the locks before using them Fernando found we hit the regular OFF_SLAB 'recursion' before we annotate the locks, cure this. The relevant portion of the stack-trace: > [ 0.000000] [<c085e24f>] rt_spin_lock+0x50/0x56 > [ 0.000000] [<c04fb406>] __cache_free+0x43/0xc3 > [ 0.000000] [<c04fb23f>] kmem_cache_free+0x6c/0xdc > [ 0.000000] [<c04fb2fe>] slab_destroy+0x4f/0x53 > [ 0.000000] [<c04fb396>] free_block+0x94/0xc1 > [ 0.000000] [<c04fc551>] do_tune_cpucache+0x10b/0x2bb > [ 0.000000] [<c04fc8dc>] enable_cpucache+0x7b/0xa7 > [ 0.000000] [<c0bd9d3c>] kmem_cache_init_late+0x1f/0x61 > [ 0.000000] [<c0bba687>] start_kernel+0x24c/0x363 > [ 0.000000] [<c0bba0ba>] i386_start_kernel+0xa9/0xaf Reported-by: Fernando Lopez-Lezcano <nando@ccrma.Stanford.EDU> Acked-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1311888176.2617.379.camel@laptop Signed-off-by: Ingo Molnar <mingo@elte.hu> The commit moved init_lock_keys() before we build up the alien, so we failed to reclass it. Cc: <stable@vger.kernel.org> # 3.0+ Acked-by: Christoph Lameter <cl@linux.com> Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-09-04mm: Use __do_krealloc to do the krealloc jobEzequiel Garcia1-14/+21
Without this patch we can get (many) kmem trace events with call site at krealloc(). This happens because krealloc is calling __krealloc, which performs the allocation through kmalloc_track_caller. Since neither krealloc nor __krealloc are marked inline explicitly, the caller can be traced as being krealloc, which clearly is not the intended behavior. This patch allows to get the real caller of krealloc, by creating an always inlined function __do_krealloc, thus tracing the call site accurately. Acked-by: Christoph Lameter <cl@linux.com> Cc: Glauber Costa <glommer@parallels.com> Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-08-17mm, slab: remove page_get_cacheDavid Rientjes1-6/+0
page_get_cache() isn't called from anything, so remove it. Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-08-17mm, slab: remove dflagsDavid Rientjes1-1/+0
cachep->dflags is never referenced, so remove it. Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-08-16mm/slab: restructure kmem_cache_create() debug checksShuah Khan1-49/+48
kmem_cache_create() does cache integrity checks when CONFIG_DEBUG_VM is defined. These checks interspersed with the regular code path has lead to compile time warnings when compiled without CONFIG_DEBUG_VM defined. Restructuring the code to move the integrity checks in to a new function would eliminate the current compile warning problem and also will allow for future changes to the debug only code to evolve without introducing new warnings in the regular path. This restructuring work is based on the discussion in the following thread: https://lkml.org/lkml/2012/7/13/424 [akpm@linux-foundation.org: fix build, cleanup] Signed-off-by: Shuah Khan <shuah.khan@hp.com> Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-08-16Revert "mm/slab_common.c: cleanup"Pekka Enberg1-5/+10
This reverts commit 455ce9eb1cfa083da0def023094190aeb133855a. Andrew sent a better version. Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-08-16slub: reduce failure of this_cpu_cmpxchg in put_cpu_partial() after unfreezingJoonsoo Kim1-0/+1
In current implementation, after unfreezing, we doesn't touch oldpage, so it remain 'NOT NULL'. When we call this_cpu_cmpxchg() with this old oldpage, this_cpu_cmpxchg() is mostly be failed. We can change value of oldpage to NULL after unfreezing, because unfreeze_partial() ensure that all the cpu partial slabs is removed from cpu partial list. In this time, we could expect that this_cpu_cmpxchg is mostly succeed. Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Joonsoo Kim <js1304@gmail.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-08-16slub: Take node lock during object free checksChristoph Lameter1-12/+18
Only applies to scenarios where debugging is on: Validation of slabs can currently occur while debugging information is updated from the fast paths of the allocator. This results in various races where we get false reports about slab metadata not being in order. This patch makes the fast paths take the node lock so that serialization with slab validation will occur. Causes additional slowdown in debug scenarios. Reported-by: Waiman Long <Waiman.Long@hp.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-08-16mm/slab_common.c: cleanupAndrew Morton1-10/+5
Eliminate an ifdef and a label by moving all the CONFIG_DEBUG_VM checking inside the locked region. Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-08-16slab: do not call compound_head() in page_get_cache()Michel Lespinasse1-1/+0
page_get_cache() does not need to call compound_head(), as its unique caller virt_to_slab() already makes sure to return a head page. Additionally, removing the compound_head() call makes page_get_cache() consistent with page_get_slab(). Signed-off-by: Michel Lespinasse <walken@google.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@kernel.org> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-08-16slub: use free_page instead of put_page for freeing kmalloc allocationGlauber Costa1-1/+1
When freeing objects, the slub allocator will most of the time free empty pages by calling __free_pages(). But high-order kmalloc will be diposed by means of put_page() instead. It makes no sense to call put_page() in kernel pages that are provided by the object allocators, so we shouldn't be doing this ourselves. Aside from the consistency change, we don't change the flow too much. put_page()'s would call its dtor function, which is __free_pages. We also already do all of the Compound page tests ourselves, and the Mlock test we lose don't really matter. Signed-off-by: Glauber Costa <glommer@parallels.com> Acked-by: Christoph Lameter <cl@linux.com> CC: David Rientjes <rientjes@google.com> CC: Pekka Enberg <penberg@kernel.org> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-08-02Linux 3.6-rc1v3.6-rc1Linus Torvalds1-2/+2
2012-08-02Merge branch 'for-linus-3.6' of git://dev.laptop.org/users/dilinger/linux-olpcLinus Torvalds13-164/+451
Pull OLPC platform updates from Andres Salomon: "These move the OLPC Embedded Controller driver out of arch/x86/platform and into drivers/platform/olpc. OLPC machines are now ARM-based (which means lots of x86 and ARM changes), but are typically pretty self-contained.. so it makes more sense to go through a separate OLPC tree after getting the appropriate review/ACKs." * 'for-linus-3.6' of git://dev.laptop.org/users/dilinger/linux-olpc: x86: OLPC: move s/r-related EC cmds to EC driver Platform: OLPC: move global variables into priv struct Platform: OLPC: move debugfs support from x86 EC driver x86: OLPC: switch over to using new EC driver on x86 Platform: OLPC: add a suspended flag to the EC driver Platform: OLPC: turn EC driver into a platform_driver Platform: OLPC: allow EC cmd to be overridden, and create a workqueue to call it drivers: OLPC: update various drivers to include olpc-ec.h Platform: OLPC: add a stub to drivers/platform/ for the OLPC EC driver
2012-08-02Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds43-569/+1387
Pull arm-soc Marvell Orion device-tree updates from Olof Johansson: "This contains a set of device-tree conversions for Marvell Orion platforms that were staged early but took a few tries to get the branch into a format where it was suitable for us to pick up. Given that most people working on these platforms are hobbyists with limited time, we were a bit more flexible with merging it even though it came in late." * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: Kirkwood: Replace mrvl with marvell ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT. ARM: Kirkwood: Describe Dreamplug LEDs in DT. ARM: Kirkwood: Describe iConnects LEDs in DT. ARM: Kirkwood: Describe iConnects temperature sensor in DT. ARM: Kirkwood: Describe IB62x0 LEDs in DT. ARM: Kirkwood: Describe IB62x0 gpio-keys in DT. ARM: Kirkwood: Describe DNS32? gpio-keys in DT. ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings ARM: Kirkwood: Describe DNS325 temperature sensor in DT. ARM: Kirkwood: Use DT to configure SATA device. ARM: kirkwood: use devicetree for SPI on dreamplug ARM: kirkwood: Add LS-XHL and LS-CHLv2 support ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net ARM: Kirkwood: Add basic device tree support for QNAP TS219. ATA: sata_mv: Add device tree support ARM: Orion: DTify the watchdog timer. ARM: Orion: Add arch support needed for I2C via DT. ARM: kirkwood: use devicetree for orion-spi ... Conflicts: drivers/watchdog/orion_wdt.c
2012-08-02Merge tag 'pm2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds3-47/+103
Pull arm-soc cpuidle enablement for OMAP from Olof Johansson: "Coupled cpuidle was meant to merge for 3.5 through Len Brown's tree, but didn't go in because the pull request ended up rejected. So it just got merged, and we got this staged branch that enables the coupled cpuidle code on OMAP. With a stable git workflow from the other maintainer we could have staged this earlier, but that wasn't the case so we have had to merge it late. The alternative is to hold it off until 3.7 but given that the code is well-isolated to OMAP and they are eager to see it go in, I didn't push back hard in that direction." * tag 'pm2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: OMAP4: CPUidle: Open broadcast clock-event device. ARM: OMAP4: CPUidle: add synchronization for coupled idle states ARM: OMAP4: CPUidle: Use coupled cpuidle states to implement SMP cpuidle. ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus
2012-08-02Merge tag 'fixes-for-linus' of ↵Linus Torvalds4-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A few fixes for merge window fallout, and a bugfix for timer resume on PRIMA2." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: mmp: add missing irqs.h arm: mvebu: fix typo in .dtsi comment for Armada XP SoCs ARM: PRIMA2: delete redundant codes to restore LATCHED when timer resumes ARM: mxc: Include missing irqs.h header
2012-08-02Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds29-47/+419
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (24 commits) sh: explicitly include sh_dma.h in setup-sh7722.c sh: ecovec: care CN5 VBUS if USB host mode sh: sh7724: fixup renesas_usbhs clock settings sh: intc: initial irqdomain support. sh: pfc: Fix up init ordering mess. serial: sh-sci: fix compilation breakage, when DMA is enabled dmaengine: shdma: restore partial transfer calculation sh: modify the sh_dmae_slave_config for RSPI in setup-sh7757 sh: Fix up recursive fault in oops with unset TTB. sh: pfc: Build fix for pinctrl_remove_gpio_range() changes. sh: select the fixed regulator driver on several boards sh: ecovec: switch MMC power control to regulators sh: add fixed voltage regulators to se7724 sh: add fixed voltage regulators to sdk7786 sh: add fixed voltage regulators to rsk sh: add fixed voltage regulators to migor sh: add fixed voltage regulators to kfr2r09 sh: add fixed voltage regulators to ap325rxa sh: add fixed voltage regulators to sh7757lcr sh: add fixed voltage regulators to sh2007 ...
2012-08-02Merge tag 'md-3.6' of git://neil.brown.name/mdLinus Torvalds5-22/+150
Pull additional md update from NeilBrown: "This contains a few patches that depend on plugging changes in the block layer so needed to wait for those. It also contains a Kconfig fix for the new RAID10 support in dm-raid." * tag 'md-3.6' of git://neil.brown.name/md: md/dm-raid: DM_RAID should select MD_RAID10 md/raid1: submit IO from originating thread instead of md thread. raid5: raid5d handle stripe in batch way raid5: make_request use batch stripe release
2012-08-02Merge branch 'for-linus' of ↵Linus Torvalds5-67/+43
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull two ceph fixes from Sage Weil: "The first patch fixes up the old crufty open intent code to use the atomic_open stuff properly, and the second fixes a possible null deref and memory leak with the crypto keys." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: fix crypto key null deref, memory leak ceph: simplify+fix atomic_open
2012-08-02Merge tag 'ecryptfs-3.6-rc1-fixes' of ↵Linus Torvalds7-316/+158
git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull ecryptfs fixes from Tyler Hicks: - Fixes a bug when the lower filesystem mount options include 'acl', but the eCryptfs mount options do not - Cleanups in the messaging code - Better handling of empty files in the lower filesystem to improve usability. Failed file creations are now cleaned up and empty lower files are converted into eCryptfs during open(). - The write-through cache changes are being reverted due to bugs that are not easy to fix. Stability outweighs the performance enhancements here. - Improvement to the mount code to catch unsupported ciphers specified in the mount options * tag 'ecryptfs-3.6-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: check for eCryptfs cipher support at mount eCryptfs: Revert to a writethrough cache model eCryptfs: Initialize empty lower files when opening them eCryptfs: Unlink lower inode when ecryptfs_create() fails eCryptfs: Make all miscdev functions use daemon ptr in file private_data eCryptfs: Remove unused messaging declarations and function eCryptfs: Copy up POSIX ACL and read-only flags from lower mount
2012-08-02Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds8-158/+270
Pull CIFS update from Steve French: "Adds SMB2 rmdir/mkdir capability to the SMB2/SMB2.1 support in cifs. I am holding up a few more days on merging the remainder of the SMB2/SMB2.1 enablement although it is nearing review completion, in order to address some review comments from Jeff Layton on a few of the subsequent SMB2 patches, and also to debug an unrelated cifs problem that Pavel discovered." * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Add SMB2 support for rmdir CIFS: Move rmdir code to ops struct CIFS: Add SMB2 support for mkdir operation CIFS: Separate protocol specific part from mkdir CIFS: Simplify cifs_mkdir call
2012-08-02mm: remove node_start_pfn checking in new WARN_ON for nowLinus Torvalds1-1/+1
Borislav Petkov reports that the new warning added in commit 88fdf75d1bb5 ("mm: warn if pg_data_t isn't initialized with zero") triggers for him, and it is the node_start_pfn field that has already been initialized once. The call trace looks like this: x86_64_start_kernel -> x86_64_start_reservations -> start_kernel -> setup_arch -> paging_init -> zone_sizes_init -> free_area_init_nodes -> free_area_init_node and (with the warning replaced by debug output), Borislav sees On node 0 totalpages: 4193848 DMA zone: 64 pages used for memmap DMA zone: 6 pages reserved DMA zone: 3890 pages, LIFO batch:0 DMA32 zone: 16320 pages used for memmap DMA32 zone: 798464 pages, LIFO batch:31 Normal zone: 52736 pages used for memmap Normal zone: 3322368 pages, LIFO batch:31 free_area_init_node: pgdat->node_start_pfn: 4423680 <---- On node 1 totalpages: 4194304 Normal zone: 65536 pages used for memmap Normal zone: 4128768 pages, LIFO batch:31 free_area_init_node: pgdat->node_start_pfn: 8617984 <---- On node 2 totalpages: 4194304 Normal zone: 65536 pages used for memmap Normal zone: 4128768 pages, LIFO batch:31 free_area_init_node: pgdat->node_start_pfn: 12812288 <---- On node 3 totalpages: 4194304 Normal zone: 65536 pages used for memmap Normal zone: 4128768 pages, LIFO batch:31 so remove the bogus warning for now to avoid annoying people. Minchan Kim is looking at it. Reported-by: Borislav Petkov <bp@amd64.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-02ARM: mmp: add missing irqs.hHaojian Zhuang1-0/+1
arch/arm/mach-mmp/gplugd.c:195:13: error: ‘MMP_NR_IRQS’ undeclared here (not in a function) make[1]: *** [arch/arm/mach-mmp/gplugd.o] Error 1 Include <mach/irqs.h> to fix this issue. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-08-02arm: mvebu: fix typo in .dtsi comment for Armada XP SoCsThomas Petazzoni1-1/+1
The comment was wrongly referring to Armada 370 while the file is related to Armada XP. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-08-02ARM: PRIMA2: delete redundant codes to restore LATCHED when timer resumesBarry Song1-3/+3
The only way to write LATCHED registers to write LATCH_BIT to LATCH register, that will latch COUNTER into LATCHED.e.g. writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); Writing values to LATCHED registers directly is useless at all. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-08-02libceph: fix crypto key null deref, memory leakSylvain Munaut2-1/+3
Avoid crashing if the crypto key payload was NULL, as when it was not correctly allocated and initialized. Also, avoid leaking it. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2012-08-02ceph: simplify+fix atomic_openSage Weil3-66/+40
The initial ->atomic_open op was carried over from the old intent code, which was incomplete and didn't really work. Replace it with a fresh method. In particular: * always attempt to do an atomic open+lookup, both for the create case and for lookups of existing files. * fix symlink handling by returning 1 to the VFS so that we can follow the link to its destination. This fixes a longstanding ceph bug (#2392). Signed-off-by: Sage Weil <sage@inktank.com>
2012-08-02sh: explicitly include sh_dma.h in setup-sh7722.cGuennadi Liakhovetski1-0/+1
setup-sh7722.c defines several objects, whose types are defined in sh_dma.h, so, it has to be included explicitly. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-08-01Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds14-72/+108
Pull MIPS updates from Ralf Baechle: "The lion share of this pull request are fixes for clk-related breakage caused by other changes during this merge window. For some platforms the fix was as simple as selecting HAVE_CLK, for others like the Loongson 2 significant restructuring was required. The remainder are changes required to get the Lantiq code to work again." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Loongson 2: Sort out clock managment. MIPS: Loongson 1: more clk support and add select HAVE_CLK MIPS: txx9: Fix redefinition of clk_* by adding select HAVE_CLK MIPS: BCM63xx: Fix redefinition of clk_* by adding select HAVE_CLK MIPS: AR7: Fix redefinition of clk_* by adding select HAVE_CLK MIPS: Lantiq: Platform specific CLK fixup MIPS: Lantiq: Add device_tree_init function MIPS: Lantiq: Fix interface clock and PCI control register offset
2012-08-01Merge branch 'for-linus-3.6-rc1' of ↵Linus Torvalds23-302/+206
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML fixes from Richard Weinberger: "This patch set contains mostly fixes and cleanups. The UML tty driver uses now tty_port and is no longer broken like hell :-)" * 'for-linus-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Add arch/x86/um to MAINTAINERS um: pass siginfo to guest process um: fix ubd_file_size for read-only files um: pull interrupt_end() into userspace() um: split syscall_trace(), pass pt_regs to it um: switch UPT_SET_RETURN_VALUE and regs_return_value to pt_regs um: set BLK_CGROUP=y in defconfig um: remove count_lock um: fully use tty_port um: Remove dead code um: remove line_ioctl() TTY: um/line, use tty from tty_port TTY: um/line, add tty_port
2012-08-01Merge branch 'dmaengine' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds28-1415/+2124
Pull ARM DMA engine updates from Russell King: "This looks scary at first glance, but what it is is: - a rework of the sa11x0 DMA engine driver merged during the previous cycle, to extract a common set of helper functions for DMA engine implementations. - conversion of amba-pl08x.c to use these helper functions. - addition of OMAP DMA engine driver (using these helper functions), and conversion of some of the OMAP DMA users to use DMA engine. Nothing in the helper functions is ARM specific, so I hope that other implementations can consolidate some of their code by making use of these helpers. This has been sitting in linux-next most of the merge cycle, and has been tested by several OMAP folk. I've tested it on sa11x0 platforms, and given it my best shot on my broken platforms which have the amba-pl08x controller. The last point is the addition to feature-removal-schedule.txt, which will have a merge conflict. Between myself and TI, we're planning to remove the old TI DMA implementation next year." Fix up trivial add/add conflicts in Documentation/feature-removal-schedule.txt and drivers/dma/{Kconfig,Makefile} * 'dmaengine' of git://git.linaro.org/people/rmk/linux-arm: (53 commits) ARM: 7481/1: OMAP2+: omap2plus_defconfig: enable OMAP DMA engine ARM: 7464/1: mmc: omap_hsmmc: ensure probe returns error if DMA channel request fails Add feature removal of old OMAP private DMA implementation mtd: omap2: remove private DMA API implementation mtd: omap2: add DMA engine support spi: omap2-mcspi: remove private DMA API implementation spi: omap2-mcspi: add DMA engine support ARM: omap: remove mmc platform data dma_mask and initialization mmc: omap: remove private DMA API implementation mmc: omap: add DMA engine support mmc: omap_hsmmc: remove private DMA API implementation mmc: omap_hsmmc: add DMA engine support dmaengine: omap: add support for cyclic DMA dmaengine: omap: add support for setting fi dmaengine: omap: add support for returning residue in tx_state method dmaengine: add OMAP DMA engine driver dmaengine: sa11x0-dma: add cyclic DMA support dmaengine: sa11x0-dma: fix DMA residue support dmaengine: PL08x: ensure all descriptors are freed when channel is released dmaengine: PL08x: get rid of write only pool_ctr and free_txd locking ...
2012-08-01Merge branch 'audit' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds5-85/+58
Pull ARM audit/signal updates from Russell King: "ARM audit/signal handling updates from Al and Will. This improves on the work Viro did last merge window, and sorts out some of the issues found with that work." * 'audit' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7475/1: sys_trace: allow all syscall arguments to be updated via ptrace ARM: 7474/1: get rid of TIF_SYSCALL_RESTARTSYS ARM: 7473/1: deal with handlerless restarts without leaving the kernel ARM: 7472/1: pull all work_pending logics into C function ARM: 7471/1: Revert "7442/1: Revert "remove unused restart trampoline"" ARM: 7470/1: Revert "7443/1: Revert "new way of handling ERESTART_RESTARTBLOCK""
2012-08-01Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds13-194/+139
Pull ARM fixes from Russell King: "This fixes various issues found during July" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7479/1: mm: avoid NULL dereference when flushing gate_vma with VIVT caches ARM: Fix undefined instruction exception handling ARM: 7480/1: only call smp_send_stop() on SMP ARM: 7478/1: errata: extend workaround for erratum #720789 ARM: 7477/1: vfp: Always save VFP state in vfp_pm_suspend on UP ARM: 7476/1: vfp: only clear vfp state for current cpu in vfp_pm_suspend ARM: 7468/1: ftrace: Trace function entry before updating index ARM: 7467/1: mutex: use generic xchg-based implementation for ARMv6+ ARM: 7466/1: disable interrupt before spinning endlessly ARM: 7465/1: Handle >4GB memory sizes in device tree and mem=size@start option
2012-08-02um: Add arch/x86/um to MAINTAINERSRichard Weinberger1-0/+1
Signed-off-by: Richard Weinberger <richard@nod.at>
2012-08-02um: pass siginfo to guest processMartin Pärtel10-34/+71
UML guest processes now get correct siginfo_t for SIGTRAP, SIGFPE, SIGILL and SIGBUS. Specifically, si_addr and si_code are now correct where previously they were si_addr = NULL and si_code = 128. Signed-off-by: Martin Pärtel <martin.partel@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-08-02um: fix ubd_file_size for read-only filesMartin Pärtel1-1/+1
Made ubd_file_size not request write access. Fixes use of read-only images. Signed-off-by: Martin Pärtel <martin.partel@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-08-02md/dm-raid: DM_RAID should select MD_RAID10NeilBrown1-2/+3
Now that DM_RAID supports raid10, it needs to select that code to ensure it is included. Cc: Jonathan Brassow <jbrassow@redhat.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-08-02md/raid1: submit IO from originating thread instead of md thread.NeilBrown2-4/+55
queuing writes to the md thread means that all requests go through the one processor which may not be able to keep up with very high request rates. So use the plugging infrastructure to submit all requests on unplug. If a 'schedule' is needed, we fall back on the old approach of handing the requests to the thread for it to handle. Signed-off-by: NeilBrown <neilb@suse.de>
2012-08-02raid5: raid5d handle stripe in batch wayShaohua Li1-13/+32
Let raid5d handle stripe in batch way to reduce conf->device_lock locking. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 05:43:50 +0000