summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-08-15mailbox: Add support for i.MX messaging unitOleksij Rempel3-0/+366
The i.MX Messaging Unit is a two side block which allows applications implement communication over this sides. The MU includes the following features: - Messaging control by interrupts or by polling - Four general-purpose interrupt requests reflected to the other side - Three general-purpose flags reflected to the other side - Four receive registers with maskable interrupt - Four transmit registers with maskable interrupt Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-15dt-bindings: mailbox: imx-mu: add generic MU channel supportOleksij Rempel1-3/+23
Each MU has four pairs of rx/tx data register with four rx/tx interrupts which can also be used as a separate channel. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-15dt-bindings: arm: fsl: add mu binding docDong Aisheng1-0/+34
The Messaging Unit module enables two processors within the SoC to communicate and coordinate by passing messages (e.g. data, status and control) through the MU interface. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-15mailbox: add MODULE_LICENSE() for mtk-cmdq-mailbox.cRandy Dunlap1-0/+2
Fix missing MODULE_LICENSE() in mtk-cmdq-mailbox.c: WARNING: modpost: missing MODULE_LICENSE() in drivers/mailbox/mtk-cmdq-mailbox.o Fixes: 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: <linux-mediatek@lists.infradead.org> Cc: CK Hu <ck.hu@mediatek.com> Cc: Houlong Wei <houlong.wei@mediatek.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox: mediatek: Add Mediatek CMDQ driverHoulong Wei4-0/+658
This patch is first version of Mediatek Command Queue(CMDQ) driver. The CMDQ is used to help write registers with critical time limitation, such as updating display configuration during the vblank. It controls Global Command Engine (GCE) hardware to achieve this requirement. Currently, CMDQ only supports display related hardwares, but we expect it can be extended to other hardwares for future requirements. Signed-off-by: Houlong Wei <houlong.wei@mediatek.com> Signed-off-by: HS Liao <hs.liao@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03dt-bindings: soc: Add documentation for the MediaTek GCE unitHoulong Wei2-0/+101
This adds documentation for the MediaTek Global Command Engine (GCE) unit found in MT8173 SoCs. Signed-off-by: Houlong Wei <houlong.wei@mediatek.com> Signed-off-by: HS Liao <hs.liao@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox: ti-msgmgr: Add support for Secure ProxyNishanth Menon1-28/+205
Secure Proxy is another communication scheme in Texas Instrument's devices intended to provide an unique communication path from various processors in the System on Chip(SoC) to a central System Controller. Secure proxy is, in effect, an evolution of current generation Message Manager hardware block found in K2G devices. However the following changes have taken place: Secure Proxy instance exposes "threads" or "proxies" which is primary representation of "a" communication channel. Each thread is preconfigured by System controller configuration based on SoC usage requirements. Secure proxy by itself represents a single "queue" of communication but allows the proxies to be independently operated. Each Secure proxy thread can uniquely have their own error and threshold interrupts allowing for more fine control of IRQ handling. Provide the driver support for Secure Proxy and thread instances. NOTE: Secure proxy configuration is only done by System Controller, hence these are assumed to be pre-configured instances. See AM65x Technical Reference Manual (SPRUID7, April 2018) for further details: http://www.ti.com/lit/pdf/spruid7 Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03dt-bindings: mailbox: Add support for secure proxy threadsNishanth Menon1-0/+50
Secure Proxy is another communication scheme in Texas Instrument's devices intended to provide an unique communication path from various processors in the System on Chip(SoC) to a central System Controller. Secure proxy is, in effect, an evolution of current generation Message Manager hardware block found in K2G devices. However the following changes have taken place: Secure Proxy instance exposes "threads" or "proxies" which is primary representation of "a" communication channel. Each thread is preconfigured by System controller configuration based on SoC usage requirements. Secure proxy by itself represents a single "queue" of communication but allows the proxies to be independently operated. Each Secure proxy thread can uniquely have their own error and threshold interrupts allowing for more fine control of IRQ handling. Provide an hardware description of the same for device tree representation. See AM65x Technical Reference Manual (SPRUID7, April 2018) for further details: http://www.ti.com/lit/pdf/spruid7 Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox: ti-msgmgr: Move the memory region name to descriptorNishanth Menon1-2/+8
For newer generation of the hardware, the naming of the region is decided at integration level and there could be additional regions as well. Hence move the region naming to be described from compatible descriptor. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox: ti-msgmgr: Change message count mask to be descriptor basedNishanth Menon1-7/+18
Change mask used to extract the message count to be descriptor based. This is to support changes for count location for various SoC solutions. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox: ti-msgmgr: Allocate Rx channel resources only on requestNishanth Menon1-30/+61
In a much bigger system SoCs, the number of Rx channels can be many and mostly unused based on the system of choice, and not all Rx channels need IRQs and allocating all memory at probe will be inefficient. Some SoCs could have total threads in the 100s and usage would be just 1 Rx thread. Thus, request and map the IRQs and allocate memory only when needed. Since these channels are requested by client drivers on need, our utilization will be optimal. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox: ti-msgmgr: Get rid of unused structure membersNishanth Menon1-6/+0
Though q_proxies and q_slices do describe the hardware configuration, they are not necessary for operation given that the values are always default. Hence drop the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox/omap: use of_device_get_match_data() to get match dataSuman Anna1-7/+14
The OMAP Mailbox driver is directly using an integer value as match data for distinguishing the interrupt register layout between OMAP2 and OMAP4+ SoCs. Introduce a dedicated structure for storing this match data, and simplify the probe function by using the of_device_get_match_data() function. This allows the driver to scale for 64-bit platforms by eliminating the unnecessary type-casting between a u32 and a void pointer types. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox/omap: switch to SPDX license identifierSuman Anna2-13/+2
Use the appropriate SPDX license identifier in the OMAP Mailbox driver source files and drop the previous boilerplate license text. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox: xgene-slimpro: Fix potential NULL pointer dereferenceGustavo A. R. Silva1-3/+3
There is a potential execution path in which function platform_get_resource() returns NULL. If this happens, we will end up having a NULL pointer dereference. Fix this by replacing devm_ioremap with devm_ioremap_resource, which has the NULL check and the memory region request. This code was detected with the help of Coccinelle. Cc: stable@vger.kernel.org Fixes: f700e84f417b ("mailbox: Add support for APM X-Gene platform mailbox driver") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-02Merge tag 'media/v4.18-3' of ↵Linus Torvalds4-9/+16
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - a deadlock regression at vsp1 driver - some Remote Controller fixes related to the new BPF filter logic added on it for Kernel 4.18. * tag 'media/v4.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: v4l: vsp1: Fix deadlock in VSPDL DRM pipelines media: rc: read out of bounds if bpf reports high protocol number media: bpf: ensure bpf program is freed on detach media: rc: be less noisy when driver misbehaves
2018-08-02Merge tag 'arc-4.18-final' of ↵Linus Torvalds8-8/+85
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: "Another batch of fixes for ARC, this time mainly DMA API rework wreckage: - Fix software managed DMA wreckage after rework in 4.17 [Euginey] * missing cache flush * SMP_CACHE_BYTES vs cache_line_size - Fix allmodconfig build errors [Randy] - Maintainer update for Mellanox (EZChip) NPS platform" * tag 'arc-4.18-final' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: arc: fix type warnings in arc/mm/cache.c arc: fix build errors in arc/include/asm/delay.h arc: [plat-eznps] fix printk warning in arc/plat-eznps/mtm.c arc: [plat-eznps] fix data type errors in platform headers ARC: [plat-eznps] Add missing struct nps_host_reg_aux_dpc ARC: add SMP_CACHE_BYTES value validate ARC: dma [non-IOC] setup SMP_CACHE_BYTES and cache_line_size ARC: dma [non IOC]: fix arc_dma_sync_single_for_(device|cpu) ARC: Add Ofer Levi as plat-eznps maintainer
2018-08-02Merge branch 'akpm' (patches from Andrew)Linus Torvalds4-5/+33
Merge misc fixes from Andrew Morton: "3 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: userfaultfd: remove uffd flags from vma->vm_flags if UFFD_EVENT_FORK fails ipc/shm.c add ->pagesize function to shm_vm_ops memcg: remove memcg_cgroup::id from IDR on mem_cgroup_css_alloc() failure
2018-08-02userfaultfd: remove uffd flags from vma->vm_flags if UFFD_EVENT_FORK failsMike Rapoport1-1/+3
The fix in commit 0cbb4b4f4c44 ("userfaultfd: clear the vma->vm_userfaultfd_ctx if UFFD_EVENT_FORK fails") cleared the vma->vm_userfaultfd_ctx but kept userfaultfd flags in vma->vm_flags that were copied from the parent process VMA. As the result, there is an inconsistency between the values of vma->vm_userfaultfd_ctx.ctx and vma->vm_flags which triggers BUG_ON in userfaultfd_release(). Clearing the uffd flags from vma->vm_flags in case of UFFD_EVENT_FORK failure resolves the issue. Link: http://lkml.kernel.org/r/1532931975-25473-1-git-send-email-rppt@linux.vnet.ibm.com Fixes: 0cbb4b4f4c44 ("userfaultfd: clear the vma->vm_userfaultfd_ctx if UFFD_EVENT_FORK fails") Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Reported-by: syzbot+121be635a7a35ddb7dcb@syzkaller.appspotmail.com Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-02ipc/shm.c add ->pagesize function to shm_vm_opsJane Chu2-0/+19
Commit 05ea88608d4e ("mm, hugetlbfs: introduce ->pagesize() to vm_operations_struct") adds a new ->pagesize() function to hugetlb_vm_ops, intended to cover all hugetlbfs backed files. With System V shared memory model, if "huge page" is specified, the "shared memory" is backed by hugetlbfs files, but the mappings initiated via shmget/shmat have their original vm_ops overwritten with shm_vm_ops, so we need to add a ->pagesize function to shm_vm_ops. Otherwise, vma_kernel_pagesize() returns PAGE_SIZE given a hugetlbfs backed vma, result in below BUG: fs/hugetlbfs/inode.c 443 if (unlikely(page_mapped(page))) { 444 BUG_ON(truncate_op); resulting in hugetlbfs: oracle (4592): Using mlock ulimits for SHM_HUGETLB is deprecated ------------[ cut here ]------------ kernel BUG at fs/hugetlbfs/inode.c:444! Modules linked in: nfsv3 rpcsec_gss_krb5 nfsv4 ... CPU: 35 PID: 5583 Comm: oracle_5583_sbt Not tainted 4.14.35-1829.el7uek.x86_64 #2 RIP: 0010:remove_inode_hugepages+0x3db/0x3e2 .... Call Trace: hugetlbfs_evict_inode+0x1e/0x3e evict+0xdb/0x1af iput+0x1a2/0x1f7 dentry_unlink_inode+0xc6/0xf0 __dentry_kill+0xd8/0x18d dput+0x1b5/0x1ed __fput+0x18b/0x216 ____fput+0xe/0x10 task_work_run+0x90/0xa7 exit_to_usermode_loop+0xdd/0x116 do_syscall_64+0x187/0x1ae entry_SYSCALL_64_after_hwframe+0x150/0x0 [jane.chu@oracle.com: relocate comment] Link: http://lkml.kernel.org/r/20180731044831.26036-1-jane.chu@oracle.com Link: http://lkml.kernel.org/r/20180727211727.5020-1-jane.chu@oracle.com Fixes: 05ea88608d4e13 ("mm, hugetlbfs: introduce ->pagesize() to vm_operations_struct") Signed-off-by: Jane Chu <jane.chu@oracle.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-02memcg: remove memcg_cgroup::id from IDR on mem_cgroup_css_alloc() failureKirill Tkhai1-4/+11
In case of memcg_online_kmem() failure, memcg_cgroup::id remains hashed in mem_cgroup_idr even after memcg memory is freed. This leads to leak of ID in mem_cgroup_idr. This patch adds removal into mem_cgroup_css_alloc(), which fixes the problem. For better readability, it adds a generic helper which is used in mem_cgroup_alloc() and mem_cgroup_id_put_many() as well. Link: http://lkml.kernel.org/r/152354470916.22460.14397070748001974638.stgit@localhost.localdomain Fixes 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure after many small jobs") Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-02Merge tag 'pci-v4.18-fixes-5' of ↵Linus Torvalds10-13/+28
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Fix integer overflow in new mobiveil driver (Dan Carpenter) - Fix race during NVMe removal/rescan (Hari Vyas) * tag 'pci-v4.18-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Fix is_added/is_busmaster race condition PCI: mobiveil: Avoid integer overflow in IB_WIN_SIZE
2018-08-02Merge tag 'arm64-fixes' of ↵Linus Torvalds1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 regression fix from Will Deacon: "Ard found a nasty arm64 regression in 4.18 where the AES ghash/gcm code doesn't notify the kernel about its use of the vector registers, therefore potentially corrupting live user state. The fix is straightforward and Herbert agreed for it to go via arm64" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: crypto/arm64: aes-ce-gcm - add missing kernel_neon_begin/end pair
2018-08-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds19-30/+184
Pull networking fixes from David Miller: "Fixes keep trickling in: 1) Various IP fragmentation memory limit hardening changes from Eric Dumazet. 2) Revert ipv6 metrics leak change, it causes more problems than it fixes for now. 3) Fix WoL regression in stmmac driver, from Jose Abreu. 4) Netlink socket spectre v1 gadget fix, from Jeremy Cline" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: Revert "net/ipv6: fix metrics leak" rxrpc: Fix user call ID check in rxrpc_service_prealloc_one net: dsa: Do not suspend/resume closed slave_dev netlink: Fix spectre v1 gadget in netlink_create() Documentation: dpaa2: Use correct heading adornment net: stmmac: Fix WoL for PCI-based setups bonding: avoid lockdep confusion in bond_get_stats() enic: do not call enic_change_mtu in enic_probe ipv4: frags: handle possible skb truesize change inet: frag: enforce memory limits earlier net/mlx5e: IPoIB, Set the netdevice sw mtu in ipoib enhanced flow net/mlx5e: Fix null pointer access when setting MTU of vport representor net/mlx5e: Set port trust mode to PCP as default net/mlx5e: E-Switch, Initialize eswitch only if eswitch manager net: dsa: mv88e6xxx: Fix SERDES support on 88E6141/6341 brcmfmac: fix regression in parsing NVRAM for multiple devices iwlwifi: add more card IDs for 9000 series
2018-08-02Squashfs: Compute expected length from inode size rather than block lengthPhillip Lougher4-23/+24
Previously in squashfs_readpage() when copying data into the page cache, it used the length of the datablock read from the filesystem (after decompression). However, if the filesystem has been corrupted this data block may be short, which will leave pages unfilled. The fix for this is to compute the expected number of bytes to copy from the inode size, and use this to detect if the block is short. Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk> Tested-by: Willy Tarreau <w@1wt.eu> Cc: Анатолий Тросиненко <anatoly.trosinenko@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-02squashfs: more metadata hardeningLinus Torvalds3-6/+13
The squashfs fragment reading code doesn't actually verify that the fragment is inside the fragment table. The end result _is_ verified to be inside the image when actually reading the fragment data, but before that is done, we may end up taking a page fault because the fragment table itself might not even exist. Another report from Anatoly and his endless squashfs image fuzzing. Reported-by: Анатолий Тросиненко <anatoly.trosinenko@gmail.com> Acked-by:: Phillip Lougher <phillip.lougher@gmail.com>, Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-01Revert "net/ipv6: fix metrics leak"David S. Miller1-14/+4
This reverts commit df18b50448fab1dff093731dfd0e25e77e1afcd1. This change causes other problems and use-after-free situations as found by syzbot. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-1/+3
Pull ARM fix from Russell King: "Just a single fix this time around for recent binutils causing build problems when generating Thumb-2 code" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8781/1: Fix Thumb-2 syscall return for binutils 2.29+
2018-08-01mm: do not initialize TLB stack vma's with vma_init()Linus Torvalds5-17/+12
Commit 2c4541e24c55 ("mm: use vma_init() to initialize VMAs on stack and data segments") tried to initialize various left-over ad-hoc vma's "properly", but actually made things worse for the temporary vma's used for TLB flushing. vma_init() doesn't actually initialize all of the vma, just a few fields, so doing something like - struct vm_area_struct vma = { .vm_mm = tlb->mm, }; + struct vm_area_struct vma; + + vma_init(&vma, tlb->mm); was actually very bad: instead of having a nicely initialized vma with every field but "vm_mm" zeroed, you'd have an entirely uninitialized vma with only a couple of fields initialized. And they weren't even fields that the code in question mostly cared about. The flush_tlb_range() function takes a "struct vma" rather than a "struct mm_struct", because a few architectures actually care about what kind of range it is - being able to only do an ITLB flush if it's a range that doesn't have data accesses enabled, for example. And all the normal users already have the vma for doing the range invalidation. But a few people want to call flush_tlb_range() with a range they just made up, so they also end up using a made-up vma. x86 just has a special "flush_tlb_mm_range()" function for this, but other architectures (arm and ia64) do the "use fake vma" thing instead, and thus got caught up in the vma_init() changes. At the same time, the TLB flushing code really doesn't care about most other fields in the vma, so vma_init() is just unnecessary and pointless. This fixes things by having an explicit "this is just an initializer for the TLB flush" initializer macro, which is used by the arm/arm64/ia64 people who mis-use this interface with just a dummy vma. Fixes: 2c4541e24c55 ("mm: use vma_init() to initialize VMAs on stack and data segments") Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-01mm: delete historical BUG from zap_pmd_range()Hugh Dickins1-4/+2
Delete the old VM_BUG_ON_VMA() from zap_pmd_range(), which asserted that mmap_sem must be held when splitting an "anonymous" vma there. Whether that's still strictly true nowadays is not entirely clear, but the danger of sometimes crashing on the BUG is now fairly clear. Even with the new stricter rules for anonymous vma marking, the condition it checks for can possible trigger. Commit 44960f2a7b63 ("staging: ashmem: Fix SIGBUS crash when traversing mmaped ashmem pages") is good, and originally I thought it was safe from that VM_BUG_ON_VMA(), because the /dev/ashmem fd exposed to the user is disconnected from the vm_file in the vma, and madvise(,,MADV_REMOVE) insists on VM_SHARED. But after I read John's earlier mail, drawing attention to the vfs_fallocate() in there: I may be wrong, and I don't know if Android has THP in the config anyway, but it looks to me like an unmap_mapping_range() from ashmem's vfs_fallocate() could hit precisely the VM_BUG_ON_VMA(), once it's vma_is_anonymous(). Signed-off-by: Hugh Dickins <hughd@google.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-01rxrpc: Fix user call ID check in rxrpc_service_prealloc_oneYueHaibing1-2/+2
There just check the user call ID isn't already in use, hence should compare user_call_ID with xcall->user_call_ID, which is current node's user_call_ID. Fixes: 540b1c48c37a ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg") Suggested-by: David Howells <dhowells@redhat.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01Merge tag 'mmc-v4.18-rc5' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fix from Ulf Hansson: "MMC host: mxcmmc: Fix build error for powerpc" * tag 'mmc-v4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: mxcmmc: Fix missing parentheses and brace
2018-08-01Merge tag 'pm-urgent-4.18' of ↵Linus Torvalds3-67/+74
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix the scope of a recent intel_pstate driver optimization used incorrectly on some systems due to processor identification ambiguity and fix a few issues in the turbostat utility, including three recent regressions. Specifics: - Use ACPI FADT preferred PM Profile to distinguish Skylake desktop processors from some server ones with the same model number in order to limit the scope of the recent IO-wait boost optimization to servers, as intended (Srinivas Pandruvada). - Fix several issues in the turbostat utility: * Fix the -S option on 1-CPU systems (Len Brown). * Fix computations using incorrect processor core counts (Artem Bityutskiy). * Fix the x2apic debug message (Len Brown). * Fix logical node enumeration to allow for non-sequential physical nodes (Prarit Bhargava). * Fix reported family on modern AMD processors (Calvin Walton). * Clarify the RAPL column information in the man page (Len Brown)" * tag 'pm-urgent-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Limit the scope of HWP dynamic boost platforms tools/power turbostat: version 18.07.27 tools/power turbostat: Read extended processor family from CPUID tools/power turbostat: Fix logical node enumeration to allow for non-sequential physical nodes tools/power turbostat: fix x2apic debug message output file tools/power turbostat: fix bogus summary values tools/power turbostat: fix -S on UP systems tools/power turbostat: Update turbostat(8) RAPL throttling column description
2018-08-01squashfs metadata 2: electric boogalooLinus Torvalds3-14/+20
Anatoly continues to find issues with fuzzed squashfs images. This time, corrupt, missing, or undersized data for the page filling wasn't checked for, because the squashfs_{copy,read}_cache() functions did the squashfs_copy_data() call without checking the resulting data size. Which could result in the page cache pages being incompletely filled in, and no error indication to the user space reading garbage data. So make a helper function for the "fill in pages" case, because the exact same incomplete sequence existed in two places. [ I should have made a squashfs branch for these things, but I didn't intend to start doing them in the first place. My historical connection through cramfs is why I got into looking at these issues at all, and every time I (continue to) think it's a one-off. Because _this_ time is always the last time. Right? - Linus ] Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Tested-by: Willy Tarreau <w@1wt.eu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Phillip Lougher <phillip@squashfs.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-01staging: ashmem: Fix SIGBUS crash when traversing mmaped ashmem pagesJohn Stultz1-0/+2
Amit Pundir and Youling in parallel reported crashes with recent mainline kernels running Android: F DEBUG : *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** F DEBUG : Build fingerprint: 'Android/db410c32_only/db410c32_only:Q/OC-MR1/102:userdebug/test-key F DEBUG : Revision: '0' F DEBUG : ABI: 'arm' F DEBUG : pid: 2261, tid: 2261, name: zygote >>> zygote <<< F DEBUG : signal 7 (SIGBUS), code 2 (BUS_ADRERR), fault addr 0xec00008 ... <snip> ... F DEBUG : backtrace: F DEBUG : #00 pc 00001c04 /system/lib/libc.so (memset+48) F DEBUG : #01 pc 0010c513 /system/lib/libart.so (create_mspace_with_base+82) F DEBUG : #02 pc 0015c601 /system/lib/libart.so (art::gc::space::DlMallocSpace::CreateMspace(void*, unsigned int, unsigned int)+40) F DEBUG : #03 pc 0015c3ed /system/lib/libart.so (art::gc::space::DlMallocSpace::CreateFromMemMap(art::MemMap*, std::__1::basic_string<char, std::__ 1::char_traits<char>, std::__1::allocator<char>> const&, unsigned int, unsigned int, unsigned int, unsigned int, bool)+36) ... This was bisected back to commit bfd40eaff5ab ("mm: fix vma_is_anonymous() false-positives"). create_mspace_with_base() in the trace above, utilizes ashmem, and with ashmem, for shared mappings we use shmem_zero_setup(), which sets the vma->vm_ops to &shmem_vm_ops. But for private ashmem mappings nothing sets the vma->vm_ops. Looking at the problematic patch, it seems to add a requirement that one call vma_set_anonymous() on a vma, otherwise the dummy_vm_ops will be used. Using the dummy_vm_ops seem to triggger SIGBUS when traversing unmapped pages. Thus, this patch adds a call to vma_set_anonymous() for ashmem private mappings and seems to avoid the reported problem. Fixes: bfd40eaff5ab ("mm: fix vma_is_anonymous() false-positives") Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Colin Cross <ccross@google.com> Cc: Matthew Wilcox <willy@infradead.org> Reported-by: Amit Pundir <amit.pundir@linaro.org> Reported-by: Youling 257 <youling257@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-01ia64: mark special ia64 memory areas anonymousLinus Torvalds1-0/+2
Commit bfd40eaff5ab ("mm: fix vma_is_anonymous() false-positives") made newly allocated vma's have a dummy vm_ops field so that they wouldn't be mistaken for anonymous mappings, and if you wanted an anonymous vma you had to explicitly say so by calling "vma_set_anonymous()" on it. However, it missed the two special vmas that ia64 processes have: the register backing store and the NaT page. So they wouldn't actually act like anonymous ranges, and page faults on them caused a SIGBUS rather than the creation of a new anon page in them. That obviously will make any ia64 binary very unhappy indeed, and the boot fails early. Fixes: bfd40eaff5ab ("mm: fix vma_is_anonymous() false-positives") Reported-by: Tony Luck <tony.luck@intel.com> Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-01net: dsa: Do not suspend/resume closed slave_devFlorian Fainelli1-0/+6
If a DSA slave network device was previously disabled, there is no need to suspend or resume it. Fixes: 2446254915a7 ("net: dsa: allow switch drivers to implement suspend/resume hooks") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01netlink: Fix spectre v1 gadget in netlink_create()Jeremy Cline1-0/+2
'protocol' is a user-controlled value, so sanitize it after the bounds check to avoid using it for speculative out-of-bounds access to arrays indexed by it. This addresses the following accesses detected with the help of smatch: * net/netlink/af_netlink.c:654 __netlink_create() warn: potential spectre issue 'nlk_cb_mutex_keys' [w] * net/netlink/af_netlink.c:654 __netlink_create() warn: potential spectre issue 'nlk_cb_mutex_key_strings' [w] * net/netlink/af_netlink.c:685 netlink_create() warn: potential spectre issue 'nl_table' [w] (local cap) Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jeremy Cline <jcline@redhat.com> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01Documentation: dpaa2: Use correct heading adornmentIoana Ciornei1-0/+1
Add overline heading adornment to document title in order to comply with kernel doc requirements. Fixes: 60b9131 staging: fsl-mc: Convert documentation to rst format Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01net: stmmac: Fix WoL for PCI-based setupsJose Abreu1-2/+38
WoL won't work in PCI-based setups because we are not saving the PCI EP state before entering suspend state and not allowing D3 wake. Fix this by using a wrapper around stmmac_{suspend/resume} which correctly sets the PCI EP state. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01bonding: avoid lockdep confusion in bond_get_stats()Eric Dumazet1-2/+12
syzbot found that the following sequence produces a LOCKDEP splat [1] ip link add bond10 type bond ip link add bond11 type bond ip link set bond11 master bond10 To fix this, we can use the already provided nest_level. This patch also provides correct nesting for dev->addr_list_lock [1] WARNING: possible recursive locking detected 4.18.0-rc6+ #167 Not tainted -------------------------------------------- syz-executor751/4439 is trying to acquire lock: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline] (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426 but task is already holding lock: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline] (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&bond->stats_lock)->rlock); lock(&(&bond->stats_lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by syz-executor751/4439: #0: (____ptrval____) (rtnl_mutex){+.+.}, at: rtnl_lock+0x17/0x20 net/core/rtnetlink.c:77 #1: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline] #1: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426 #2: (____ptrval____) (rcu_read_lock){....}, at: bond_get_stats+0x0/0x560 include/linux/compiler.h:215 stack backtrace: CPU: 0 PID: 4439 Comm: syz-executor751 Not tainted 4.18.0-rc6+ #167 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 print_deadlock_bug kernel/locking/lockdep.c:1765 [inline] check_deadlock kernel/locking/lockdep.c:1809 [inline] validate_chain kernel/locking/lockdep.c:2405 [inline] __lock_acquire.cold.64+0x1fb/0x486 kernel/locking/lockdep.c:3435 lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x2a/0x40 kernel/locking/spinlock.c:144 spin_lock include/linux/spinlock.h:310 [inline] bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426 dev_get_stats+0x10f/0x470 net/core/dev.c:8316 bond_get_stats+0x232/0x560 drivers/net/bonding/bond_main.c:3432 dev_get_stats+0x10f/0x470 net/core/dev.c:8316 rtnl_fill_stats+0x4d/0xac0 net/core/rtnetlink.c:1169 rtnl_fill_ifinfo+0x1aa6/0x3fb0 net/core/rtnetlink.c:1611 rtmsg_ifinfo_build_skb+0xc8/0x190 net/core/rtnetlink.c:3268 rtmsg_ifinfo_event.part.30+0x45/0xe0 net/core/rtnetlink.c:3300 rtmsg_ifinfo_event net/core/rtnetlink.c:3297 [inline] rtnetlink_event+0x144/0x170 net/core/rtnetlink.c:4716 notifier_call_chain+0x180/0x390 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1735 call_netdevice_notifiers net/core/dev.c:1753 [inline] netdev_features_change net/core/dev.c:1321 [inline] netdev_change_features+0xb3/0x110 net/core/dev.c:7759 bond_compute_features.isra.47+0x585/0xa50 drivers/net/bonding/bond_main.c:1120 bond_enslave+0x1b25/0x5da0 drivers/net/bonding/bond_main.c:1755 bond_do_ioctl+0x7cb/0xae0 drivers/net/bonding/bond_main.c:3528 dev_ifsioc+0x43c/0xb30 net/core/dev_ioctl.c:327 dev_ioctl+0x1b5/0xcc0 net/core/dev_ioctl.c:493 sock_do_ioctl+0x1d3/0x3e0 net/socket.c:992 sock_ioctl+0x30d/0x680 net/socket.c:1093 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:500 [inline] do_vfs_ioctl+0x1de/0x1720 fs/ioctl.c:684 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701 __do_sys_ioctl fs/ioctl.c:708 [inline] __se_sys_ioctl fs/ioctl.c:706 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x440859 Code: e8 2c af 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc51a92878 EFLAGS: 00000213 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000440859 RDX: 0000000020000040 RSI: 0000000000008990 RDI: 0000000000000003 RBP: 0000000000000000 R08: 00000000004002c8 R09: 00000000004002c8 R10: 00000000022d5880 R11: 0000000000000213 R12: 0000000000007390 R13: 0000000000401db0 R14: 0000000000000000 R15: 0000000000000000 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01Merge branch 'pm-tools'Rafael J. Wysocki2-65/+59
Merge turbostat utility fixes for final 4.18: - Fix the -S option on 1-CPU systems. - Fix computations using incorrect processor core counts. - Fix the x2apic debug message. - Fix logical node enumeration to allow for non-sequential physical nodes. - Fix reported family on modern AMD processors. - Clarify the RAPL column information in the man page. * pm-tools: tools/power turbostat: version 18.07.27 tools/power turbostat: Read extended processor family from CPUID tools/power turbostat: Fix logical node enumeration to allow for non-sequential physical nodes tools/power turbostat: fix x2apic debug message output file tools/power turbostat: fix bogus summary values tools/power turbostat: fix -S on UP systems tools/power turbostat: Update turbostat(8) RAPL throttling column description
2018-07-31enic: do not call enic_change_mtu in enic_probeGovindarajulu Varadarajan1-1/+1
In commit ab123fe071c9 ("enic: handle mtu change for vf properly") ASSERT_RTNL() is added to _enic_change_mtu() to prevent it from being called without rtnl held. enic_probe() calls enic_change_mtu() without rtnl held. At this point netdev is not registered yet. Remove call to enic_change_mtu and assign the mtu to netdev->mtu. Fixes: ab123fe071c9 ("enic: handle mtu change for vf properly") Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-31ipv4: frags: handle possible skb truesize changeEric Dumazet1-0/+5
ip_frag_queue() might call pskb_pull() on one skb that is already in the fragment queue. We need to take care of possible truesize change, or we might have an imbalance of the netns frags memory usage. IPv6 is immune to this bug, because RFC5722, Section 4, amended by Errata ID 3089 states : When reassembling an IPv6 datagram, if one or more its constituent fragments is determined to be an overlapping fragment, the entire datagram (and any constituent fragments) MUST be silently discarded. Fixes: 158f323b9868 ("net: adjust skb->truesize in pskb_expand_head()") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-31inet: frag: enforce memory limits earlierEric Dumazet1-3/+3
We currently check current frags memory usage only when a new frag queue is created. This allows attackers to first consume the memory budget (default : 4 MB) creating thousands of frag queues, then sending tiny skbs to exceed high_thresh limit by 2 to 3 order of magnitude. Note that before commit 648700f76b03 ("inet: frags: use rhashtables for reassembly units"), work queue could be starved under DOS, getting no cpu cycles. After commit 648700f76b03, only the per frag queue timer can eventually remove an incomplete frag queue and its skbs. Fixes: b13d3cbfb8e8 ("inet: frag: move eviction of queues to work queue") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jann Horn <jannh@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Peter Oskolkov <posk@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-31Merge tag 'mlx5-fixes-2018-07-31' of ↵David S. Miller4-3/+10
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2018-07-31 The following series includes four mlx5 fixes. Please pull and let me know if there's any problem. For -stable v4.14 net/mlx5e: E-Switch, Initialize eswitch only if eswitch manager For -stable v4.16 net/mlx5e: Set port trust mode to PCP as default For -stable v4.17 net/mlx5e: IPoIB, Set the netdevice sw mtu in ipoib enhanced flow ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-31Merge tag 'audit-pr-20180731' of ↵Linus Torvalds1-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit fix from Paul Moore: "A single small audit fix to guard against memory allocation failures when logging information about a kernel module load. It's small, easy to understand, and self-contained; while nothing is zero risk, this should be pretty low" * tag 'audit-pr-20180731' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: fix potential null dereference 'context->module.name'
2018-07-31net/mlx5e: IPoIB, Set the netdevice sw mtu in ipoib enhanced flowFeras Daoud1-0/+4
After introduction of the cited commit, mlx5e_build_nic_params receives the netdevice mtu in order to set the sw_mtu of mlx5e_params. For enhanced IPoIB, the netdevice mtu is not set in this stage, therefore, the initial sw_mtu equals zero. As a result, the hw_mtu of the receive queue will be calculated incorrectly causing traffic issues. To fix this issue, query for port mtu before building the nic params. Fixes: 472a1e44b349 ("net/mlx5e: Save MTU in channels params") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-07-31net/mlx5e: Fix null pointer access when setting MTU of vport representorAdi Nissim1-1/+2
MTU helper function is used by both conventional mlx5e instances (PF/VF) and the eswitch representors. The representor shouldn't change the nic vport context MTU, the VF is responsible for that. Therefore set_mtu_cb has a null value when changing the representor MTU. Fixes: 250a42b6a764 ("net/mlx5e: Support configurable MTU for vport representors") Signed-off-by: Adi Nissim <adin@mellanox.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-07-31net/mlx5e: Set port trust mode to PCP as defaultOr Gerlitz1-0/+2
The hairpin offload code has dependency on the trust mode being PCP. Hence we should set PCP as the default for handling cases where we are disallowed to read the trust mode from the FW, or failed to initialize it. Fixes: 106be53b6b0a ('net/mlx5e: Set per priority hairpin pairs') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 00:06:46 +0000