summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2013-07-03rapidio: documentation updateAlexandre Bounine2-13/+86
Update RapidIO documentation files to reflect modularization changes. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@Prodrive.nl> Cc: Micha Nelissen <micha.nelissen@Prodrive.nl> Cc: Stef van Os <stef.van.os@Prodrive.nl> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03rapidio: add udev notificationAlexandre Bounine7-17/+74
Add RapidIO-specific modalias generation to enable udev notifications about RapidIO-specific events. The RapidIO modalias string format is shown below: "rapidio:vNNNNdNNNNavNNNNadNNNN" Where: v - Device Vendor ID (16 bit), d - Device ID (16 bit), av - Assembly Vendor ID (16 bit), ad - Assembly ID (16 bit), as they are reported in corresponding Capability Registers (CARs) of each RapidIO device. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@Prodrive.nl> Cc: Micha Nelissen <micha.nelissen@Prodrive.nl> Cc: Stef van Os <stef.van.os@Prodrive.nl> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03rapidio: add modular build option for the subsystem coreAlexandre Bounine3-16/+19
Add a configuration option to build RapidIO subsystem core code as a loadable kernel module. Currently this option is available only for x86-based platforms, with the additional patch for PowerPC planned to be provided later. This patch replaces kernel command line parameter "riohdid=" with its module-specific analog "rapidio.hdid=". Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@Prodrive.nl> Cc: Micha Nelissen <micha.nelissen@Prodrive.nl> Cc: Stef van Os <stef.van.os@Prodrive.nl> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03rapidio/tsi721: convert to modular mport driverAlexandre Bounine4-10/+9
This patch adds an option to build device driver for Tsi721 PCIe-to-SRIO bridge device as a kernel module. Currently this module cannot be unloaded because the existing RapidIO subsystem code does not support dynamic removal of local RapidIO controllers (TODO). Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@Prodrive.nl> Cc: Micha Nelissen <micha.nelissen@Prodrive.nl> Cc: Stef van Os <stef.van.os@Prodrive.nl> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03rapidio: update enumerator registration mechanismAlexandre Bounine5-48/+164
Update enumeration/discovery method registration mechanism to allow loading enumeration/discovery methods before all mports are registered. Existing statically linked RapidIO subsystem expects that all available RapidIO mport devices are initialized and registered before the enumeration/discovery method is registered. Switching to loadable mport device drivers creates situation when mport device driver can be loaded after enumeration/discovery method is attached (e.g., loadable mport driver in a system with statically linked RapidIO core and enumerator). This also will happen in a system with hot-pluggable RapidIO controllers. To remove the dependency on the initialization/registration order this patch introduces enumeration/discovery registration mechanism that supports arbitrary registration order of mports and enumerator/discovery methods. The following registration rules are implemented: - only one enumeration/discovery method can be registered for given mport ID (including RIO_MPORT_ANY); - when new enumeration/discovery methods tries to attach to the registered mport device, method with matching mport ID will replace a default method previously registered for given mport (if any); - enumeration/discovery method with target ID=RIO_MPORT_ANY will be attached only to mports that do not have another enumerator attached to them; - when new mport device is registered with RapidIO subsystem, registration routine searches for the enumeration/discovery method with the best matching mport ID; Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@Prodrive.nl> Cc: Micha Nelissen <micha.nelissen@Prodrive.nl> Cc: Stef van Os <stef.van.os@Prodrive.nl> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03rapidio/rionet: rework driver initialization and removalAlexandre Bounine1-25/+78
Rework probe/remove routines to prevent rionet driver from monopolizing target RapidIO devices. Fix conflict with modular RapidIO switch drivers. Using one of RapidIO messaging channels rionet driver provides a service layer common to all endpoint devices in a system's RapidIO network. These devices may also require their own specific device driver which will be blocked from attaching to the target device by rionet (or block rionet if loaded earlier). To avoid conflict with device-specific drivers, the rionet driver is reworked to be registered as a subsystem interface on the RapidIO bus. The reworked rio_remove_dev() and rionet_exit() routines also include handling of individual rionet peer device removal which was not supported before. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andre van Herk <andre.van.herk@Prodrive.nl> Cc: Micha Nelissen <micha.nelissen@Prodrive.nl> Cc: Stef van Os <stef.van.os@Prodrive.nl> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03rapidio: convert switch drivers to modulesAlexandre Bounine12-345/+568
Rework RapidIO switch drivers to add an option to build them as loadable kernel modules. This patch removes RapidIO-specific vmlinux section and converts switch drivers to be compatible with LDM driver registration method. To simplify registration of device-specific callback routines this patch introduces rio_switch_ops data structure. The sw_sysfs() callback is removed from the list of device-specific operations because under the new structure its functions can be handled by switch driver's probe() and remove() routines. If a specific switch device driver is not loaded the RapidIO subsystem core will use default standard-based operations to configure a switch. Because the current implementation of RapidIO enumeration/discovery method relies on availability of device-specific operations for error management, switch device drivers must be loaded before the RapidIO enumeration/discovery starts. This patch also moves several common routines from enumeration/discovery module into the RapidIO core code to make switch-specific operations accessible to all components of RapidIO subsystem. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@Prodrive.nl> Cc: Micha Nelissen <micha.nelissen@Prodrive.nl> Cc: Stef van Os <stef.van.os@Prodrive.nl> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rapidio/rio-scan.c: make functions staticWu Fengguang1-2/+2
sparse warnings: drivers/rapidio/rio-scan.c:1143:5: sparse: symbol 'rio_enum_mport' was not declared. Should it be static? drivers/rapidio/rio-scan.c:1246:5: sparse: symbol 'rio_disc_mport' was not declared. Should it be static? Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Cc: "Bounine, Alexandre" <Alexandre.Bounine@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03rapidio/switches: remove tsi500 driverAlexandre Bounine3-86/+0
Remove the driver for Tsi500 Parallel RapidIO switch because this device has not been available for several years. Since the first introduction of Tsi500, the parallel RapidIO interface was replaced by the serial RapidIO (sRIO) and therefore there is no value in keeping this driver. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03idr: print a stack dump after ida_remove warningJean Delvare1-5/+2
We print a dump stack after idr_remove warning. This is useful to find the faulty piece of code. Let's do the same for ida_remove, as it would be equally useful there. [akpm@linux-foundation.org: convert the open-coded printk+dump_stack into WARN()] Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Tejun Heo <tj@kernel.org> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03s390: remove setting for saved_max_pfnZhang Yanfei1-4/+0
The only user of saved_max_pfn in s390 is read_oldmem interface but we have removed that interface, so saved_max_pfn is now unneeded in s390, and we needn't set it anymore. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Hansen <dave@sr71.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ia64: remove setting for saved_max_pfnZhang Yanfei1-5/+0
The only user of saved_max_pfn in ia64 is read_oldmem interface but we have removed that interface, so saved_max_pfn is now unneeded in ia64, and we needn't set it anymore. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Hansen <dave@sr71.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03powerpc: Remove savemaxmem parameter setupZhang Yanfei1-10/+0
saved_max_pfn is used to know the amount of memory that the previous kernel used. And for powerpc, we set saved_max_pfn by passing the kernel commandline parameter "savemaxmem=". The only user of saved_max_pfn in powerpc is read_oldmem interface. Since we have removed read_oldmem, we don't need this parameter anymore. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Dave Hansen <dave@sr71.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03mips: remove savemaxmem parameter setupZhang Yanfei1-10/+0
saved_max_pfn is used to know the amount of memory that the previous kernel used. And for powerpc, we set saved_max_pfn by passing the kernel commandline parameter "savemaxmem=". The only user of saved_max_pfn in mips is read_oldmem interface. Since we have removed read_oldmem, so we don't need this parameter anymore. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Hansen <dave@sr71.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03Documentation/kdump/kdump.txt: remove /dev/oldmem descriptionZhang Yanfei1-25/+6
Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Hansen <dave@sr71.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03/dev/oldmem: Remove the interfaceZhang Yanfei2-49/+1
/dev/oldmem provides the interface for us to access the "old memory" in the dump-capture kernel. Unfortunately, no one actually uses this interface. And this interface could actually cause some real problems if used on ia64 where the cached/uncached accesses are mixed. See the discussion from the link: https://lkml.org/lkml/2013/4/12/386. So Eric suggested that we should remove /dev/oldmem as an unused piece of code. [akpm@linux-foundation.org: mention /dev/oldmem obsolescence in devices.txt] Suggested-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Dave Hansen <dave@sr71.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03fs/exec.c:de_thread: mt-exec should update ->real_start_timeOleg Nesterov1-0/+1
924b42d5 ("Use boot based time for process start time and boot time in /proc") updated copy_process/do_task_stat but forgot about de_thread(). This breaks "ps axOT" if a sub-thread execs. Note: I think that task->start_time should die. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Tomas Janousek <tjanouse@redhat.com> Cc: Tomas Smetana <tsmetana@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03fs/exec.c: do_execve_common(): use current_user()Oleg Nesterov1-2/+1
Trivial cleanup. do_execve_common() can use current_user() and avoid the unnecessary "struct cred *cred" var. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03kernel/fork.c:copy_process(): consolidate the lockless CLONE_THREAD checksOleg Nesterov1-17/+16
copy_process() does a lot of "chaotic" initializations and checks CLONE_THREAD twice before it takes tasklist. In particular it sets "p->group_leader = p" and then changes it again under tasklist if !thread_group_leader(p). This looks a bit confusing, lets create a single "if (CLONE_THREAD)" block which initializes ->exit_signal, ->group_leader, and ->tgid. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Sergey Dyasly <dserrg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03kernel/fork.c:copy_process(): don't add the uninitialized child to ↵Oleg Nesterov3-15/+19
thread/task/pid lists copy_process() adds the new child to thread_group/init_task.tasks list and then does attach_pid(child, PIDTYPE_PID). This means that the lockless next_thread() or next_task() can see this thread with the wrong pid. Say, "ls /proc/pid/task" can list the same inode twice. We could move attach_pid(child, PIDTYPE_PID) up, but in this case find_task_by_vpid() can find the new thread before it was fully initialized. And this is already true for PIDTYPE_PGID/PIDTYPE_SID, With this patch copy_process() initializes child->pids[*].pid first, then calls attach_pid() to insert the task into the pid->tasks list. attach_pid() no longer need the "struct pid*" argument, it is always called after pid_link->pid was already set. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Sergey Dyasly <dserrg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03kernel/fork.c:copy_process(): unify CLONE_THREAD-or-thread_group_leader codeOleg Nesterov1-8/+7
Cleanup and preparation for the next changes. Move the "if (clone_flags & CLONE_THREAD)" code down under "if (likely(p->pid))" and turn it into into the "else" branch. This makes the process/thread initialization more symmetrical and removes one check. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Sergey Dyasly <dserrg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03fork: reorder permissions when violating number of processes limitsEric Paris1-2/+2
When a task is attempting to violate the RLIMIT_NPROC limit we have a check to see if the task is sufficiently priviledged. The check first looks at CAP_SYS_ADMIN, then CAP_SYS_RESOURCE, then if the task is uid=0. A result is that tasks which are allowed by the uid=0 check are first checked against the security subsystem. This results in the security subsystem auditting a denial for sys_admin and sys_resource and then the task passing the uid=0 check. This patch rearranges the code to first check uid=0, since if we pass that we shouldn't hit the security system at all. We then check sys_resource, since it is the smallest capability which will solve the problem. Lastly we check the fallback everything cap_sysadmin. We don't want to give this capability many places since it is so powerful. This will eliminate many of the false positive/needless denial messages we get when a root task tries to violate the nproc limit. (note that kthreads count against root, so on a sufficiently large machine we can actually get past the default limits before any userspace tasks are launched.) Signed-off-by: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03fs/proc/kcore.c: using strlcpy() instead of strncpy()Zhao Hongjiang1-1/+1
For NUL terminated string, set '\0' at the end. Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03fs/proc/uptime.c:uptime_proc_show(): use get_monotonic_boottime()Oleg Nesterov1-2/+1
Change uptime_proc_show() to use get_monotonic_boottime() instead of do_posix_clock_monotonic_gettime() + monotonic_to_bootbased(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Tomas Janousek <tjanouse@redhat.com> Cc: Tomas Smetana <tsmetana@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03exit.c: unexport __set_special_pids()Oleg Nesterov3-14/+12
Move __set_special_pids() from exit.c to sys.c close to its single caller and make it static. And rename it to set_special_pids(), another helper with this name has gone away. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03fs/exec.c:de_thread(): use change_pid() rather than detach_pid/attach_pidOleg Nesterov1-2/+1
de_thread() can use change_pid() instead of detach + attach. This looks better and this ensures that, say, next_thread() can never see a task with ->pid == NULL. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Sergey Dyasly <dserrg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03coredump: '% at the end' shouldn't bypass core_uses_pid logicOleg Nesterov1-5/+7
"goto end" should not bypass the "Backward compatibility with core_uses_pid" code, move this label up. While at it, - It is ugly to copy '|' into cn->corename and then inc the pointer for argv_split(). Change format_corename() to increment pat_ptr instead. - Remove the dead "if (*pat_ptr == 0)" in format_corename(), we already checked it is not zero. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Colin Walters <walters@verbum.org> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Lennart Poettering <mzxreary@0pointer.de> Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03coredump: kill call_count, add core_name_sizeOleg Nesterov1-9/+10
Imho, "atomic_t call_count" is ugly and should die. It buys nothing and in fact it can grow more than necessary, expand doesn't check if it was already incremented by another task. Kill it, and introduce "static int core_name_size" updated by expand_corename(). This is obviously racy too but harmless, and core_name_size never grows for no reason. We do not bother to to calculate the "right" new size, we simply do kmalloc(size_we_need) and use ksize() to rely on kmalloc_index's decision. Finally change format_corename() to use expand_corename(), krealloc(NULL) is fine. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Colin Walters <walters@verbum.org> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Lennart Poettering <mzxreary@0pointer.de> Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03coredump: kill cn_escape(), introduce cn_esc_printf()Oleg Nesterov1-23/+21
The usage of cn_escape() looks really annoying, imho this sequence needs a wrapper. And it is buggy. If cn_printf() does expand_corename() cn_escape() writes to the freed memory. Introduce cn_esc_printf() which hopefully does this all right. It records the index before cn_vprintf(), not "char *" which is no longer valid (in general) after krealloc(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Colin Walters <walters@verbum.org> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Lennart Poettering <mzxreary@0pointer.de> Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03coredump: cn_vprintf() has no reason to call vsnprintf() twiceOleg Nesterov1-18/+12
cn_vprintf() looks really overcomplicated and sub-optimal. We do not need vsnprintf(NULL) to calculate the size we need, we can simply try to print into the current buffer and expand/retry only if necessary. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Colin Walters <walters@verbum.org> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Lennart Poettering <mzxreary@0pointer.de> Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03coredump: introduce cn_vprintf()Oleg Nesterov1-7/+13
Turn cn_printf(...) into cn_vprintf(va_list args), reintroduce cn_printf() as a trivial wrapper. This simplifies the next change and cn_vprintf() will have more callers. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Colin Walters <walters@verbum.org> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Lennart Poettering <mzxreary@0pointer.de> Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03coredump: format_corename() can leak cn->corenameOleg Nesterov1-11/+7
do_coredump() assumes that format_corename() can only fail if expand_corename() fails and frees cn->corename. This is not true, for example cn_print_exe_file() can fail and in this case nobody frees cn->corename. Change do_coredump() to always do kfree(cn->corename) after it calls format_corename() (NULL is fine), change expand_corename() to do nothing if kmalloc() fails. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Colin Walters <walters@verbum.org> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Lennart Poettering <mzxreary@0pointer.de> Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03usermodehelper: kill the sub_info->path[0] checkOleg Nesterov1-8/+3
call_usermodehelper_exec() does nothing but returns success if path[0] == 0. The only user which needs this strange feature is request_module(), it can check modprobe_path[0] itself like other users do if they want to detect the "disabled by admin" case. Kill it. Not only it looks strange, it can confuse other callers. And this allows us to revert 264b83c0 ("usermodehelper: check subprocess_info->path != NULL"), do_execve(NULL) is safe. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03signals: eventpoll: do not use sigprocmask()Oleg Nesterov1-6/+6
sigprocmask() should die. None of the current callers actually need this strange interface. Change fs/eventpoll.c to use set_current_blocked(). This also means we should not worry about SIGKILL/SIGSTOP. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eric Wong <normalperson@yhbt.net> Cc: Jason Baron <jbaron@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ptrace: add ability to get/set signal-blocked maskAndrey Vagin2-2/+45
crtools uses a parasite code for dumping processes. The parasite code is injected into a process with help PTRACE_SEIZE. Currently crtools blocks signals from a parasite code. If a process has pending signals, crtools wait while a process handles these signals. This method is not suitable for stopped tasks. A stopped task can have a few pending signals, when we will try to execute a parasite code, we will need to drop SIGSTOP, but all other signals must remain pending, because a state of processes must not be changed during checkpointing. This patch adds two ptrace commands to set/get signal-blocked mask. I think gdb can use this commands too. [akpm@linux-foundation.org: be consistent with brace layout] Signed-off-by: Andrey Vagin <avagin@openvz.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03x86: kill TIF_DEBUGOleg Nesterov1-3/+1
Because it is not used. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03docbook: add futexes to kernel-locking docbookRandy Dunlap1-1/+6
Add Fast User Mutexes (futexes) to kernel-locking docbook. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03Documentation/CodingStyle: allow multiple return statements per functionDan Carpenter1-1/+2
A surprising number of newbies interpret this section to mean that only one return statement is allowed per function. Part of the problem is that the "one return statement per function" rule is an actual style guideline that people are used to from other projects. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Eduardo Valentin <eduardo.valentin@ti.com> Cc: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03fs/fat: use fat_msg() to replace printk() in __fat_fs_error()Gu Zheng1-3/+2
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03] nilfs2: use atomic64_t type for inodes_count and blocks_count fields in ↵Vyacheslav Dubeyko6-14/+16
nilfs_root struct The cp_inodes_count and cp_blocks_count are represented as __le64 type in on-disk structure (struct nilfs_checkpoint). But analogous fields in in-core structure (struct nilfs_root) are represented by atomic_t type. This patch replaces atomic_t on atomic64_t type in representation of inodes_count and blocks_count fields in struct nilfs_root. Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by: Joern Engel <joern@logfs.org> Cc: Clemens Eisserer <linuxhippy@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03nilfs2: implement calculation of free inodes countVyacheslav Dubeyko5-2/+112
Currently, NILFS2 returns 0 as free inodes count (f_ffree) and current used inodes count as total file nodes in file system (f_files): df -i Filesystem Inodes IUsed IFree IUse% Mounted on /dev/loop0 2 2 0 100% /mnt/nilfs2 This patch implements real calculation of free inodes count. First of all, it is calculated total file nodes in file system as (desc_blocks_count * groups_per_desc_block * entries_per_group). Then, it is calculated free inodes count as difference the total file nodes and used inodes count. As a result, we have such output for NILFS2: df -i Filesystem Inodes IUsed IFree IUse% Mounted on /dev/loop0 4194304 2114701 2079603 51% /mnt/nilfs2 Reported-by: Clemens Eisserer <linuxhippy@gmail.com> Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Joern Engel <joern@logfs.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-sirfsoc.c: add rtc drivers for CSR SiRFprimaII and SiRFatlasVIXianglong Du5-2/+485
On CSR SiRFprimaII/atlasVI, there is a programmable 16-bit divider (RTC_DIV) that divides the input 32.768KHz clock to the frequency that users need (E.g. 1 Hz). The divided real-time clock will be used to drive a 32-bit counter (RTC_COUNTER) that provides users with the actual time. In each cycle of the divided real-time clock, there is a Hertz interrupt generated to the RISC. Users can also configure an alarm (RTC_ALARM). When RTC_COUNTER matches the alarm, there will be an alarm interrupt generated to the RISC. The system RTC can generate an alarm wake-up signal to notify the power controller to wake up from power saving mode. Signed-off-by: Xianglong Du <Xianglong.Du@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-ds1216.c: use module_platform_driver_probe()Fabio Porcedda1-12/+1
Use module_platform_driver_probe() macro which makes the code smaller and simpler. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03rtc: omap: restore back (hard-code) wakeup supportHebbar Gururaja1-0/+2
rtc-omap driver modules is used both by OMAP1/2, Davinci SoC platforms. However, rtc wake support on OMAP1 is broken. Hence the device_init_wakeup() was removed from rtc-omap driver and moved to platform board files that supported it (DA850/OMAP-L138). [1] However, recently [2] it was suggested that driver should always do a device_init_wakeup(dev, true). Platforms that don't want/need wakeup support can disable it from userspace via: echo disabled > /sys/devices/.../power/wakeup Also, with the new DT boot-up, board file doesn't exist and hence there is no way to have device wakeup support rtc. The fix for above issues, is to hard code device_init_wakeup() inside driver and let platforms that don't need this, handle it through the sysfs power entry. [1] https://patchwork.kernel.org/patch/136731/ [2] http://www.mail-archive.com/davinci-linux-open-source@linux. davincidsp.com/msg26077.html Signed-off-by: Hebbar Gururaja <gururaja.hebbar@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03rtc: add NXP PCF2127 support (i2c)Renaud Cerrato3-0/+251
Added support for NXP PCF2127 RTC (i2c). [akpm@linux-foundation.org: fix typo, fix warnings] Signed-off-by: Renaud Cerrato <r.cerrato@til-technologies.fr> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-palmas.c: init wakeup before device registerWei Ni1-1/+1
Enable dev as wakeup device before calling rtc_device_register(), so that it can create the "wakealarm" sysfs. Signed-off-by: Wei Ni <wni@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/class: convert from Legacy pm ops to dev_pm_opsShuah Khan1-6/+6
Convert drivers/rtc/class to use dev_pm_ops for power management and remove Legacy PM ops hooks. With this change, rtc class registers suspend/resume callbacks via class->pm (dev_pm_ops) instead of Legacy class->suspend/resume. When __device_suspend() runs call-backs, it will find class->pm ops for the rtc class. Signed-off-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Shuah Khan <shuahkhan@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-pcf2123.c: replace strict_strtoul() with kstrtoul()Jingoo Han1-5/+10
The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/interface.c: return -EBUSY, not -EACCES when device is busyChris Brand1-4/+4
If rtc->irq_task is non-NULL and task is NULL, they always rtc_irq_set_freq(), whenever err is set to -EBUSY it will then immediately be set to -EACCES, misleading the caller as to the underlying problem. Signed-off-by: Chris Brand <chris.brand@broadcom.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-twl.c: cleanup with module_platform_driver() conversionPeter Ujfalusi1-11/+1
Use module_platform_driver() to register the platform driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 09:19:05 +0000