summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2013-11-26clksrc: delete nomadik MTU non-DT boot pathLinus Walleij2-27/+5
Both platforms using the MTU (Nomadik and Ux500) have now been converted to use device tree exclusively, thus let us delete this platform data header and make this driver a fully self-contained DT-only driver. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Lee Jones <lee.jones@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: decomission the non-DT MTU init sequenceLinus Walleij1-26/+2
The MTU is now only initialized using the native clocksource device tree matching. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26dma: ste_dma40: Parse flags property for new 'high priority channel' requestLee Jones1-0/+4
This is used for MSP (audio) devices which is about to be fully DT:ed. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26dma: ste_dma40: Expand DT binding to accept 'high-priority channel' flagLee Jones1-0/+3
This is used for MSP (audio) devices which is about to be fully DT:ed. Cc: devicetree@vger.kernel.org Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: Remove checking for DT during timer initLee Jones1-20/+8
Decomission the non-DT boot path as we are now DT only Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: Clean-up legacy extern prototypeLee Jones1-3/+0
Decomission io_mapping() and device init calls from non-DT boot path. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: Remove unused call to register AMBA devicesLee Jones3-30/+1
Decomission the AMBA device register functions. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: Clean-up non-DT IRQ initialisationLee Jones1-16/+6
Decommission the non-DT boot path. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26pinctrl: nomadik: decomission non-DT boot pathLinus Walleij1-58/+22
After the patches deleting the last board registering this pin controller as a platform device has been deleted, proceed to remove the non-DT boot patch and depend on OF being available and the device to be coming up by a DT node. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26pinctrl: nomadik: move platform data handling into driverLinus Walleij3-245/+227
This decomissions the platform data header (which is no longer in use after the systems using this driver were switched to a pure device-tree config path) and merges the result into the driver file or local driver header. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: get rid of unused headerLinus Walleij1-1/+0
This removes the unused inclusion of <linux/platform_data/pinctrl-nomadik.h> which is the last user in the entire kernel of this platform data header. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: delete Nomadik pinctrl AUXDATALinus Walleij1-4/+0
This deletes the AUXDATA hammering down the Nomadik pin controller name to "pinctrl-db8500". We have removed all dependencies on this name. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: delete remnant pin config macrosLinus Walleij1-23/+0
This deletes a few final pin configuration macros from the ux500. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: move snowball pin configs to device treeLinus Walleij2-19/+59
Move the few remaining snowball pin configurations to the device tree, reference these as hogs to the pin controller until there are real devices that can make use of them. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: move snowball LED pin control to device treeLinus Walleij2-2/+11
This moves the Snowball LED pin config to the device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: convert Snowball SPI pin referenceLinus Walleij2-5/+28
The SPI0 block is not at all connected to the AB8500 on the Snowball: it is connected to the external header. These pins on the header may also be used for GPIO, but let's assume that SPI is a probable usecase on the Snowball and mux in the SPI block and use these for SPI. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: move snowball ethernet config to device treeLinus Walleij2-4/+25
This transfers the muxing and biasing of the ethernet-related pins on the snowball over to the device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: move HREFv60plus pin configs to device treeLinus Walleij2-55/+153
Move the few remaining HREFv60 pin configurations to the device tree, reference these as hogs to the pin controller until there are real devices that can make use of them. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: move final HREFv60 LCD pins to device treeLinus Walleij2-7/+17
Put two extra configs into the device tree to handle the default configuration of the display reset signals on the HREFv60plus, move this over from the board file to the device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: move the HREFv60plus IPGPIO pins to device treeLinus Walleij2-16/+31
Move the control of muxing and enabling the IPGPIO (image processor GPIO) from the static set-up to the device tree. Use a hog as we have no device for the flash controller yet. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: move the WLAN GPIO pin setup to the device treeLinus Walleij2-75/+19
This moves some of the pin setup related to the CW1200 WLAN module over to the device tree. As the driver is not yet activated for the CW1200 WLAN we do not assign this pinctrl state to any device node yet. Get rid of the cmdline argument passing of a certain U9500 platform variant, as this is not supported by the kernel or any device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: move GPIO key configuration to device treeLinus Walleij6-25/+84
This moves over the configuration of the GPIO keys (used for proximity sensor and Hall effect sensor) from the static pin configuration file to the device tree. As part of the exercise, implement the GPIO keys properly in a per-UIB file as this setup actually differs with each UIB. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: move old HREF ipgpio to the device treeLinus Walleij2-24/+16
The old HREFs (MOP500) were controlling an image-processor GPIO (IPGPIO) by using hogs. Do the same thing with device tree and get rid of the mop500_pins setting. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: drop STM pinmap settingsLinus Walleij1-200/+0
The pin mappings for the STM (System Trace Macrocell) are not really used by anything: we have no driver for is and the settings are not connected to any device. We can recreate the different mux outputs in the device tree the day we need them. Drop these for now. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: move SKE pin config to device treeLinus Walleij3-87/+97
This moves the SKE keypad pin control table out of the board file and into the device tree. This was previously set to be active on all MOP500 and HREF boards but after reading the schematic this seems incorrect: the HREFv60 and later uses one of these for MC5 and no reference designs have the SKE connected to any hardware so just leave the pins alone in the power-on state. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: move MCDE pin config to device treeLinus Walleij4-19/+39
This moves the MCDE pin control table out of the board file and into the device tree. Some pins and configs have been marked as used by sub-devices or slaves to the MCDE, such as I2C device 0-070 which is the HDMI interface circuit AV8100, but the pins rather belong to the MCDE SOC block as they come out of the main ASIC. The touch screen GPIO is not related to MCDE so this gets deleted and need to be tied to the respective touch screen (I2C) device once that device is added instead. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: create MCDE node to collect resourcesLinus Walleij1-0/+17
As we need to connect resources such as pin mappings and clocks when deleting board files, we create a MCDE node even though there is no driver for it. As it is only using standard bindings right now, this does not matter much. When a proper driver is written for the MCDE, it can augment this node with custom properties. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: move SPI pin config to device treeLinus Walleij4-19/+114
This moves the SPI pin control table out of the board file and into the device tree. Move the specific setting for SSP0 on the HREFprev60 into the prev60-specific DTS file. The SPI2 configuration is not really connected to any device, as it will conflict with GPIO218 which is used on all HREFs. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: move MUSB pin config to device treeLinus Walleij5-25/+79
This moves the MUSB pin control table out of the board file and into the device tree. Tie the config to the on-chip MUSB device rather than the ab8500-usb device which is off-chip. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: move GPIO217/218 config to device treeLinus Walleij4-7/+28
This moves the input-pulled-up setting for GPIO217 as used on the HREFs prior to v60 from the boardfile to the device tree. GPIO218 is only used with the TVK UIB so move it to that .dtsi file. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: move MSP pin control to the device treeLinus Walleij4-30/+91
This moves the static, device-tied pin control configuration out of the board file board-mop500-pins.c and into the device tree. Add nodes for MSP0 and MSP2 on the HREF and Snowball so we can reference the pins properly. Cc: Lee Jones <lee.jones@linaro.org> Cc: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: move MMC/SD/SDIO pin control to the device treeLinus Walleij7-107/+314
This moves the static, device-tied pin control configuration out of the board file board-mop500-pins.c and into the device tree. Add entries for SDI1 and SDI2 on the Snowball so that the WLAN pins on SDI1 can be used further on, and the unused pins on SDI2 can be put to sleep. Cc: Lee Jones <lee.jones@linaro.org> Cc: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: move I2C pin control to the device treeLinus Walleij4-22/+150
This moves the static, device-tied pin control configuration out of the board file board-mop500-pins.c and into the device tree. Define possible states also for I2C4 even if it's not used by any board file at this time. Cc: Lee Jones <lee.jones@linaro.org> Cc: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: move UART pin control to the device treeLinus Walleij4-52/+134
This moves the static, device-tied pin control configuration out of the board file board-mop500-pins.c and into the device tree. We create a new .dtsi-file to be shared between all the MOP500-related boards, that include all HREF variants and the Snowball board. Assign pin states for HREF and Snowball boards alike. Cc: Lee Jones <lee.jones@linaro.org> Cc: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: Add DMA config bindings for MSP devicesLee Jones1-0/+15
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: Consolidate [A|D]B8500 platform dataLee Jones9-120/+17
Move the platform data from all these files into one, delete empty files and remove all references to them. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: Remove legacy ATAG SSP supportLee Jones2-31/+0
This hasn't been used since we converted the platform to DT only. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ux500: adjust the TC3589x devices to the bindingLinus Walleij2-10/+37
The TC3589x devices appearing in the ST Ericsson device trees are adjusted to use the new binding so this is in a good shape, and we add the keypad on the TVK1281618 UIB so this is working again. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-22Linux 3.13-rc1v3.13-rc1Linus Torvalds1-2/+2
2013-11-22Merge tag 'ecryptfs-3.13-rc1-quiet-checkers' of ↵Linus Torvalds1-6/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull minor eCryptfs fix from Tyler Hicks: "Quiet static checkers by removing unneeded conditionals" * tag 'ecryptfs-3.13-rc1-quiet-checkers' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: file->private_data is always valid
2013-11-22Merge tag 'sound-fix2-3.13-rc1' of ↵Linus Torvalds9-47/+161
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull second set of sound fixes from Takashi Iwai: "A collection of small fixes in HD-audio quirks and runtime PM, ASoC rcar, abs8500 and other codecs. Most of commits are for stable kernels, too" * tag 'sound-fix2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Set current_headset_type to ALC_HEADSET_TYPE_ENUM (janitorial) ALSA: hda - Provide missing pin configs for VAIO with ALC260 ALSA: hda - Add headset quirk for Dell Inspiron 3135 ALSA: hda - Fix the headphone jack detection on Sony VAIO TX ALSA: hda - Fix missing bass speaker on ASUS N550 ALSA: hda - Fix unbalanced runtime PM notification at resume ASoC: arizona: Set FLL to free-run before disabling ALSA: hda - A casual Dell Headset quirk ASoC: rcar: fixup dma_async_issue_pending() timing ASoC: rcar: off by one in rsnd_scu_set_route() ASoC: wm5110: Add post SYSCLK register patch for rev D chip ASoC: ab8500: Revert to using custom I/O functions ALSA: hda - Also enable mute/micmute LED control for "Lenovo dock" fixup ALSA: firewire-lib: include sound/asound.h to refer to snd_pcm_format_t ALSA: hda - Select FW_LOADER from CONFIG_SND_HDA_CODEC_CA0132_DSP ALSA: hda - Enable mute/mic-mute LEDs for more Thinkpads with Realtek codec ASoC: rcar: fixup mod access before checking
2013-11-22Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds54-324/+1057
Pull DRM fixes from Dave Airlie: "I was going to leave this until post -rc1 but sysfs fixes broke hotplug in userspace, so I had to fix it harder, otherwise a set of pulls from intel, radeon and vmware, The vmware/ttm changes are bit larger but since its early and they are unlikely to break anything else I put them in, it lets vmware work with dri3" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (36 commits) drm/sysfs: fix hotplug regression since lifetime changes drm/exynos: g2d: fix memory leak to userptr drm/i915: Fix gen3 self-refresh watermarks drm/ttm: Remove set_need_resched from the ttm fault handler drm/ttm: Don't move non-existing data drm/radeon: hook up backlight functions for CI and KV family. drm/i915: Replicate BIOS eDP bpp clamping hack for hsw drm/i915: Do not enable package C8 on unsupported hardware drm/i915: Hold pc8 lock around toggling pc8.gpu_idle drm/i915: encoder->get_config is no longer optional drm/i915/tv: add ->get_config callback drm/radeon/cik: Add macrotile mode array query drm/radeon/cik: Return backend map information to userspace drm/vmwgfx: Make vmwgfx dma buffers prime aware drm/vmwgfx: Make surfaces prime-aware drm/vmwgfx: Hook up the prime ioctls drm/ttm: Add a minimal prime implementation for ttm base objects drm/vmwgfx: Fix false lockdep warning drm/ttm: Allow execbuf util reserves without ticket drm/i915: restore the early forcewake cleanup ...
2013-11-22Merge tag 'pci-v3.13-fixes-1' of ↵Linus Torvalds65-521/+518
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Miscellaneous - Remove duplicate disable from pcie_portdrv_remove() (Yinghai Lu) - Fix whitespace, capitalization, and spelling errors (Bjorn Helgaas)" * tag 'pci-v3.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Remove duplicate pci_disable_device() from pcie_portdrv_remove() PCI: Fix whitespace, capitalization, and spelling errors
2013-11-22Merge branch 'for-next' of ↵Linus Torvalds53-789/+1009
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "Things have been quiet this round with mostly bugfixes, percpu conversions, and other minor iscsi-target conformance testing changes. The highlights include: - Add demo_mode_discovery attribute for iscsi-target (Thomas) - Convert tcm_fc(FCoE) to use percpu-ida pre-allocation - Add send completion interrupt coalescing for ib_isert - Convert target-core to use percpu-refcounting for se_lun - Fix mutex_trylock usage bug in iscsit_increment_maxcmdsn - tcm_loop updates (Hannes) - target-core ALUA cleanups + prep for v3.14 SCSI Referrals support (Hannes) v3.14 is currently shaping to be a busy development cycle in target land, with initial support for T10 Referrals and T10 DIF currently on the roadmap" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (40 commits) iscsi-target: chap auth shouldn't match username with trailing garbage iscsi-target: fix extract_param to handle buffer length corner case iscsi-target: Expose default_erl as TPG attribute target_core_configfs: split up ALUA supported states target_core_alua: Make supported states configurable target_core_alua: Store supported ALUA states target_core_alua: Rename ALUA_ACCESS_STATE_OPTIMIZED target_core_alua: spellcheck target core: rename (ex,im)plict -> (ex,im)plicit percpu-refcount: Add percpu-refcount.o to obj-y iscsi-target: Do not reject non-immediate CmdSNs exceeding MaxCmdSN iscsi-target: Convert iscsi_session statistics to atomic_long_t target: Convert se_device statistics to atomic_long_t target: Fix delayed Task Aborted Status (TAS) handling bug iscsi-target: Reject unsupported multi PDU text command sequence ib_isert: Avoid duplicate iscsit_increment_maxcmdsn call iscsi-target: Fix mutex_trylock usage in iscsit_increment_maxcmdsn target: Core does not need blkdev.h target: Pass through I/O topology for block backstores iser-target: Avoid using FRMR for single dma entry requests ...
2013-11-22Merge tag 'hwmon-for-linus' of ↵Linus Torvalds5-13/+88
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - acpi_power_meter: Fix return value check from call to acpi_bus_get_device - nct6775: Fix/improve NCT6791 support - lm75: Add support for GMT G751 * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (acpi_power_meter) Fix acpi_bus_get_device() return value check hwmon: (nct6775) NCT6791 supports weight control only for CPUFAN hwmon: (nct6775) Monitor additional temperature registers hwmon: (lm75) Add support for GMT G751 chip
2013-11-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds72-316/+504
Pull networking fixes from David Miller: 1) Fix memory leaks and other issues in mwifiex driver, from Amitkumar Karwar. 2) skb_segment() can choke on packets using frag lists, fix from Herbert Xu with help from Eric Dumazet and others. 3) IPv4 output cached route instantiation properly handles races involving two threads trying to install the same route, but we forgot to propagate this logic to input routes as well. Fix from Alexei Starovoitov. 4) Put protections in place to make sure that recvmsg() paths never accidently copy uninitialized memory back into userspace and also make sure that we never try to use more that sockaddr_storage for building the on-kernel-stack copy of a sockaddr. Fixes from Hannes Frederic Sowa. 5) R8152 driver transmit flow bug fixes from Hayes Wang. 6) Fix some minor fallouts from genetlink changes, from Johannes Berg and Michael Opdenacker. 7) AF_PACKET sendmsg path can race with netdevice unregister notifier, fix by using RCU to make sure the network device doesn't go away from under us. Fix from Daniel Borkmann. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) gso: handle new frag_list of frags GRO packets genetlink: fix genl_set_err() group ID genetlink: fix genlmsg_multicast() bug packet: fix use after free race in send path when dev is released xen-netback: stop the VIF thread before unbinding IRQs wimax: remove dead code net/phy: Add the autocross feature for forced links on VSC82x4 net/phy: Add VSC8662 support net/phy: Add VSC8574 support net/phy: Add VSC8234 support net: add BUG_ON if kernel advertises msg_namelen > sizeof(struct sockaddr_storage) net: rework recvmsg handler msg_name and msg_namelen logic bridge: flush br's address entry in fdb when remove the net: core: Always propagate flag changes to interfaces ipv4: fix race in concurrent ip_route_input_slow() r8152: fix incorrect type in assignment r8152: support stopping/waking tx queue r8152: modify the tx flow r8152: fix tx/rx memory overflow netfilter: ebt_ip6: fix source and destination matching ...
2013-11-22Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds8-14/+39
Pull ARM fixes from Russell King: "Some small fixes for this merge window, most of them quite self explanatory - the biggest thing here is a fix for the ARMv7 LPAE suspend/resume support" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7894/1: kconfig: select GENERIC_CLOCKEVENTS if HAVE_ARM_ARCH_TIMER ARM: 7893/1: bitops: only emit .arch_extension mp if CONFIG_SMP ARM: 7892/1: Fix warning for V7M builds ARM: 7888/1: seccomp: not compatible with ARM OABI ARM: 7886/1: make OABI default to off ARM: 7885/1: Save/Restore 64-bit TTBR registers on LPAE suspend/resume ARM: 7884/1: mm: Fix ECC mem policy printk ARM: 7883/1: fix mov to mvn conversion in case of 64 bit phys_addr_t and BE ARM: 7882/1: mm: fix __phys_to_virt to work with 64 bit phys_addr_t in BE case ARM: 7881/1: __fixup_smp read of SCU config should do byteswap in BE case ARM: Fix nommu.c build warning
2013-11-22Merge branch 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds3-9/+32
Pull KVM fixes from Gleb Natapov. * 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: kvm_clear_guest_page(): fix empty_zero_page usage kvm: mmu: delay mmu audit activation arm/arm64: KVM: Fix hyp mappings of vmalloc regions
2013-11-22Merge git://git.kvack.org/~bcrl/aio-nextLinus Torvalds1-83/+51
Pull aio fixes from Benjamin LaHaise. * git://git.kvack.org/~bcrl/aio-next: aio: nullify aio->ring_pages after freeing it aio: prevent double free in ioctx_alloc aio: Fix a trinity splat
2013-11-22Merge branch 'for-3.13' of git://linux-nfs.org/~bfields/linuxLinus Torvalds2-75/+101
Pull nfsd bugfixes from Bruce Fields: "A couple nfsd bugfixes" * 'for-3.13' of git://linux-nfs.org/~bfields/linux: nfsd4: fix xdr decoding of large non-write compounds nfsd: make sure to balance get/put_write_access nfsd: split up nfsd_setattr
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 23:00:44 +0000