summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2006-03-20[PATCH] USB: CREDITS: Add credits about the ZC0301 and ET61X[12]51 USB driversLuca Risolia1-0/+2
This patch adds credits about the ZC0301 and ET61X[12]51 USB drivers which have been included in the mainline kernel recently. Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: ZC0301 driver updatesLuca Risolia4-29/+37
"Cosmetic" driver updates for the ZC0301 driver: - Fix stream_interrupt() (and work around a possible kernel bug); - Fix vidioc_enum_input() and split vidioc_gs_input() in two parts; - Use wait_event_interruptible_timeout() instead of wait_event_interruptible() when waiting for video frames; - replace erroneous wake_up_interruptible(&wait_stream) with wake_up(&wait_stream); - Cosmetic cleanups in the documentation. Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: Fix warning in drivers/usb/media/ov511.cMatthew Martin1-1/+1
Gcc 4.0.2 had the warning: drivers/usb/media/ov511.c: In function 'show_exposure': drivers/usb/media/ov511.c:5642: warning: 'exp' may be used uninitialized in this function Here is the patch to fix that warning. Signed-off-by: Matthew Martin <lihnucks@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: ethernet gadget driver section fixupsAras Vaichas1-11/+27
This patch allows you to set the iSerialNumber field in the usb_device_descriptor structure for your USB ethernet gadget. It also changes the parameters shown through sysfs so they're no longer declared as __initdata, preventing potential oopses. That's most useful for the Ethernet addresses, which may in some cases be random "locally administered" addresses. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: gadget driver section fixupsDavid Brownell5-12/+15
This adds __init section annotations to gadget driver bind() routines to remove calls from .text into .init sections (for endpoint autoconfig). Likewise it adds __exit section annotations to their unbind() routines. The specification of the gadget driver register/unregister functions is updated to explicitly allow use of those sections. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] usbcore: fix compile error with CONFIG_USB_SUSPEND=nAlan Stern1-1/+1
This patch (as647) fixes a small error introduced by a recent change to the USB core suspend/resume code. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB core and HCDs: don't put_device while atomicAlan Stern7-14/+5
This patch (as640) removes several put_device and the corresponding get_device calls from the USB core and HCDs. Some of the puts were done in atomic contexts, and none of them are needed since the core now guarantees that every endpoint will be disabled and every URB completed before a USB device is released. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] uhci-hcd: fix mistaken usage of list_prepare_entryAlan Stern1-1/+1
A recent update to the uhci-hcd driver invoked the list_prepare_entry macro incorrectly. This patch (as646) corrects it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] UHCI: Don't log short transfersAlan Stern1-1/+1
Even when the URB_SHORT_NOT_OK flag is set, a short transfer shouldn't generate a debugging log message. Especially not one with the confusing claim that the transfer "failed with status 0". This patch (as627) fixes that behavior in uhci-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] UHCI: improve debugging codeAlan Stern4-39/+70
This patch (as626) makes some improvements to the debugging code in uhci-hcd. The main change is that now the code won't get compiled if CONFIG_USB_DEBUG isn't set. But there are other changes too, like adding a missing .owner field and printing a debugging dump if the controller dies. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] UHCI: remove main list of URBsAlan Stern4-370/+279
As part of reorienting uhci-hcd away from URBs and toward endpoint queues, this patch (as625) eliminates the driver's main list of URBs. The list wsa used mainly in checking for URB completions; now the driver goes through the list of active endpoints and checks the members of the queues. As a side effect, I had to remove the code that looks for FSBR timeouts. For now, FSBR will remain on so long as any URBs on a full-speed control or bulk queue request it, even if the queue isn't advancing. A later patch can add more intelligent handling. This isn't a huge drawback; it's pretty rare for an URB to get stuck for more than a fraction of a second. (And it will help the people trying to use those insane HP USB devices.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] UHCI: use dummy TDsAlan Stern3-61/+83
This patch (as624) fixes a hardware race in uhci-hcd by adding a dummy TD to the end of each endpoint's queue. Without the dummy the host controller will effectively turn off the queue when it reaches the end, which happens asynchronously. This leads to a potential problem when new transfer descriptors are added to the end of the queue; they may never get used. With a dummy TD present the controller never turns off the queue; instead it just stops at the dummy and leaves the queue on but inactive. When new TDs are added to the end of the queue, the first new one gets written over the dummy. Thus there's never any question about whether the queue is running or needs to be restarted. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] UHCI: use one QH per endpoint, not per URBAlan Stern4-862/+685
This patch (as623) changes the uhci-hcd driver to make it use one QH per device endpoint, instead of a QH per URB as it does now. Numerous areas of the code are affected by this. For example, the distinction between "queued" URBs and non-"queued" URBs no longer exists; all URBs belong to a queue and some just happen to be at the queue's head. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: Fix masking bug initialization of Freescale EHCI controllerKumar Gala1-2/+1
In setting up the of PHY we masked off too many bits, instead just initialize PORTSC for the type of PHY we are using. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: Zero driver: Removed duplicated codeFranck Bui-Huu1-6/+0
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: Pegasus: Linksys USBVPN1 support + cleanupMalte Doersam2-12/+15
This patch adds a second linksys vendor-id (077b) and the product id of the pegasus based adapter USBVPN1 http://www1.linksys.com/Products/product.asp?prid=3D543&scid=3D30 Furthermore it replaces all LINKSYS_GPIO_RESET with DEFAULT_GPIO_RESET as both are declared like this: #define DEFAULT_GPIO_RESET 0x24 #define LINKSYS_GPIO_RESET 0x24 This is misleading and confusing. The check is now done via the VENDOR_ID in pegasus.c: if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS Signed-off-by: Malte Doersam <mdoersam@arcor.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] usbhid: add error handlingAlan Stern2-21/+142
This patch (as628c) adds error handling to the USB HID core. When an error is reported for an interrupt URB, the driver will do delayed retries, at increasing intervals, for up to one second. If that doesn't work, it will try to reset the device. Testing by users has shown that both the retries and the resets end up getting used. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: remove usbcore-specific wakeup flagsDavid Brownell4-27/+48
This makes usbcore use the driver model wakeup flags for host controllers and for their root hubs. Since previous patches have removed all users of the HCD flags they replace, this converts the last users of those flags. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: ohci uses driver model wakeup flagsDavid Brownell3-30/+46
This makes OHCI use the driver model wakeup control bits for its root hub (e.g. disable on amd756, because of chip erratum) and for the controller itself. It no longer uses the hcd glue bits with those roles, and depends on the previous patch making the root hub available earlier. Note that on most platforms (boot code properly setting the RWC bit) this gives a partial workaround for the way PCI isn't currently flagging devices that support PME# signals. (Because of odd PCI init sequencing on PPC.) That's because many OHCI controllers support "legacy PCI PM" ... without involving any PCI PM capability. USB wakeup from STR, if it works on your system, may still involve tweaking things by hand in /proc/acpi/wakeup. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: usbcore sets up root hubs earlierDavid Brownell1-49/+55
Make the HCD initialization sequence more sane ... notably, setting up root hubs before HCDs are asked to do their one-time init. Among other things, that lets the HCDs do custom root hub init along with all the other one-time initialization done in the (now misnamed) reset() method. This also copies the controller wakeup flags into the root hub; it's done a bit later than would be ideal, but that'll be necessary until the PCI code initializes them correctly. (The PCI patch breaks on PPC due to how it sequences PCI initialization.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] recognize three more usb peripheral controllersDavid Brownell2-2/+36
This adds declarations for three USB peripheral controllers: - Two high speed USB cores that can be licensed from Mentor Graphics to be integrated into silicon: * "musbhsfc" is for peripherals only, as found in for example the IBM/AMCC 44EP processors. * "musbhdrc" is OTG-capable (dual role), and is found in various products including OMAP 2430 and the new DaVinci SOCs. The "musbh" standing for "Mentor USB Highspeed", the rest standing for "Function Controller" or "Dual Role Controller" (OTG-capable). - The full speed controller on the FreeScale MPC8272. Adding these definitions just allows gadget driver code to handle any controller-specific logic; controller drivers are quite separate. Signed-off-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: minor gadget/rndis tweakDavid Brownell1-1/+2
Resove a minor FIXME: don't change MTU while RNDIS link is active, the other end won't expect such things... Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: add support for AT91 gadgetDavid Brownell4-0/+1972
This adds support for the USB peripheral controller on AT91 (rm9200, eventually also sam9261 or uClinux) platforms. More SOC support for Linux-USB ... an uncomplicated pure PIO driver. It'd be worth using this as a model, if you're starting a driver for some other peripheral controller. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: add support for OCHI on AT91rm9200Andrew Victor4-0/+313
This adds support for OHCI on AT91rm9200 based boards. Possibly of interest here is the way this uses <linux/clk.h> to gate clocks on/off during system pm state transitions. That's typical for non-PCI systems. Some can go further; Mini-A host side connectors enable ID-pin sensing. From: Andrew Victor <andrew@sanpeople.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: EHCI unlink tweaksDavid Brownell1-2/+4
This patch modifies the behavior of the EHCI driver in an unlink path that seems to be causing various issues on some systems. Those problems have included issues with disconnection, driver unbinding, and similar cases where urb unlinking would just not work right. This patch should help avoid those problems by not turning off the async (control/bulk) schedule until it's not expecting an "async advance" IRQ, which comes from the processing passing the schedule head. Whether the driver attempts to do such things is dependent on system timings, so many folk would never have seen these problems. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: OHCI for AU1200Jordan Crouse2-16/+88
ALCHEMY: Add OHCI support for AU1200 Updated by moving the OHCI support out of the EHCI patch. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: EHCI for AU1200Jordan Crouse7-8/+319
ALCHEMY: Add EHCI support for AU1200 Updated by removing the OHCI support Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: EHCI and Freescale 83xx quirkKumar Gala3-1/+33
On the MPC834x processors the multiport host (MPH) EHCI controller has an erratum in which the port number in the queue head expects to be 0..N-1 instead of 1..N. If we are on one of these chips we subtract one from the port number before putting it into the queue head. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: EHCI for Freescale 83xxRandy Vinson6-2/+430
Adding a Host Mode USB driver for the Freescale 83xx. This driver supports both the Dual-Role (DR) controller and the Multi-Port-Host (MPH) controller present in the Freescale MPC8349. It has been tested with the MPC8349CDS reference system. This driver depends on platform support code for setting up the pins on the device package in a manner appropriate for the board in use. Note that this patch requires selecting the EHCI controller option under the USB Host menu. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: EHCI full speed ISO bugfixesClemens Ladisch1-5/+6
This patch replaces the split ISO raw_mask calculation code in the iso_stream_init() function that computed incorrect numbers of high speed transactions for both input and output transfers. In the output case, it added a superfluous start-split transaction for all maxmimum packet sizes that are a multiple of 188. In the input case, it forgot to add complete-split transactions for all microframes covered by the full speed transaction, and the additional complete-split transaction needed for the case when full speed data starts arriving near the end of a microframe. These changes don't affect the lack of full speed bandwidth, but at least it removes the MMF errors that the HC raised with some input streams. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: EHCI and NF2 quirkDavid Brownell3-2/+30
This teaches the EHCI driver about a quirk seen in older NForce2 chips, adding a workaround to ignore selective suspend requests. Bus-wide (so-called "global") suspend still works, as does USB wakeup of a root hub that's globally suspended. There's still a hole in this support though. Strictly speaking, this should _fail_ selective suspend requests, rather than ignoring them, since doing it this way means that devices which should be able to issue remote wakeup are not going to be able to do that. For now, we'll just live with that problem ... since usbcore expects to do selective suspend on the way towards a full bus suspend, and usbcore needs to be able to do full bus suspend. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: convert a bunch of USB semaphores to mutexesArjan van de Ven34-372/+389
the patch below converts a bunch of semaphores-used-as-mutex in the USB code to mutexes Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: remove LINUX_VERSION_CODE macro usagePekka Enberg3-14/+1
This patch removes unnecessary LINUX_VERSION_CODE macro usage from drivers/usb/. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: drivers/usb/core/message.c: make usb_get_string() staticAdrian Bunk2-5/+2
After the removal of usb-midi.c, there's no longer any external user of usb_get_string(). Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: remove OBSOLETE_OSS_USB_DRIVER driversAdrian Bunk7-6347/+0
This patch removes the obsolete USB_MIDI and USB_AUDIO drivers. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] ub: use kzallocPete Zaitcev1-8/+4
Switch from kmalloc+memset to kzalloc. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: kzalloc in sisusbvgaOliver Neukum1-3/+2
this does two things: - use kzalloc where appropriate - correct error return codes in ioctl Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: kzalloc in usbledOliver Neukum1-2/+1
another one for kzalloc. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: kzalloc in PhidgetServoOliver Neukum1-2/+1
another for kzalloc. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: kzalloc in PhidgetInterfaceKitOliver Neukum1-6/+3
another for kzalloc. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: kzalloc in ldusbOliver Neukum1-2/+1
another one for kzalloc Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: kzalloc in idmouseOliver Neukum1-2/+1
another for kzalloc. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: kzalloc in cythermOliver Neukum1-2/+1
another one for kzalloc. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: kzalloc in usbvideoOliver Neukum1-2/+1
another for kzalloc. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: kzalloc in w9968cfOliver Neukum1-9/+4
another one for kzalloc. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: kzalloc in dabusbOliver Neukum1-3/+2
kzalloc in dabusb. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: kzalloc for hidOliver Neukum4-23/+10
this uses kzalloc in hid. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: kzalloc for storageOliver Neukum5-13/+7
another one for kzalloc. This covers the storage subdirectory. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: mdc800.c to kzallocOliver Neukum1-3/+1
one more conversion to kzalloc. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: optimise devio.c usbdev_read fixAndrew Morton1-4/+4
drivers/usb/core/devio.c: In function `usbdev_read': drivers/usb/core/devio.c:140: error: invalid type argument of `->' drivers/usb/core/devio.c:141: error: invalid type argument of `->' drivers/usb/core/devio.c:142: error: invalid type argument of `->' drivers/usb/core/devio.c:143: error: invalid type argument of `->' Cc: Oliver Neukum <oliver@neukum.org> Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 21:01:28 +0000