summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2013-09-28IPv6 NAT: Do not drop DNATed 6to4/6rd packetsCatalin\(ux\) M. BOIE3-15/+100
When a router is doing DNAT for 6to4/6rd packets the latest anti-spoofing commit 218774dc ("ipv6: add anti-spoofing checks for 6to4 and 6rd") will drop them because the IPv6 address embedded does not match the IPv4 destination. This patch will allow them to pass by testing if we have an address that matches on 6to4/6rd interface. I have been hit by this problem using Fedora and IPV6TO4_IPV4ADDR. Also, log the dropped packets (with rate limit). Signed-off-by: Catalin(ux) M. BOIE <catab@embedromix.ro> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28USBNET: fix handling padding packetMing Lei2-6/+22
Commit 638c5115a7949(USBNET: support DMA SG) introduces DMA SG if the usb host controller is capable of building packet from discontinuous buffers, but missed handling padding packet when building DMA SG. This patch attachs the pre-allocated padding packet at the end of the sg list, so padding packet can be sent to device if drivers require that. Reported-by: David Laight <David.Laight@aculab.com> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27qlcnic: Fix register device in FAILED state for 82xx.Sucheta Chakraborty3-2/+57
o Commit 7e2cf4feba058476324dc545e3d1b316998c91e6 ("qlcnic: change driver hardware interface mechanism") has overwritten commit b43e5ee76a4320c070cf0fe65cf4927198fbb4d1 ("qlcnic: Register device in FAILED state") Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27be2net: Fix to display the VLAN priority for a VFAjit Khaparde1-2/+2
VLAN priority is not being displayed for a VF currently when user executes "ip link show" command. This patch fixes it. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27be2net: Fix to configure VLAN priority for a VF interface.Ajit Khaparde1-10/+11
Thix fix allows the VLAN priority to be configured for a VF interface via the "ip link set DEVICE vf NUM" path. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27be2net: Fix to allow VLAN configuration on VF interfaces.Ajit Khaparde1-9/+0
Now the VF interfaces have privilege to add VLANs. Allow VLANs to be configured on these interfaces. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27be2net: Fix number of VLANs supported in UMC mode for BE3-R.Ajit Khaparde2-0/+3
In BE3-R, when UMC is enabled, the number of VLANs that can be added to the interface is reduced to 15. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27be2net: Fix VLAN promiscuous mode programmingAjit Khaparde4-6/+40
When the interface runs out of the allocated entries in VLAN table, we program the interface in VLAN promiscuous mode. Use OPCODE_COMMON_NTWK_RX_FILTER to set VLAN Promiscuous mode instead of OPCODE_COMMON_NTWK_VLAN_CONFIG. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27be2net: Fix the size of be_nic_res_desc structureAjit Khaparde1-1/+1
Size of be_nic_res_desc structure is incorrect. Fix it. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27be2net: Fix to prevent Tx stall on SH-R when packet size < 32Ajit Khaparde1-3/+3
Tx on SH-R can lockup if the packet size is less than 32 bytes. Pad such packets to a safer 36-byte size. Patch uses the Lancer-R workaround - which checks for packet <= 32-bytes Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27Merge branch 'for-davem' of ↵David S. Miller27-147/+128
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== Regarding the Bluetooth bits, Gustavo says: "First Bluetooth fixes to 3.12, it includes: * 3 patches to add device id for 3 new hardwares. * 2 patches from Johan to fix the rfkill behaviour during setup stage * a small clean up in the rfcomm TTY code that fixes a potential racy condition (by Gianluca Anzolin) * 2 fixes to proper set encryption key size and security level in the peripheral role of Bluetooth LE devices. (by Andre Guedes) * a fix for dealing devices where pairing is not necessary, we were keeping the Bluetooth ACL connection alive for too much time. (by Syam Sidhardhan)" Also, I fixed-up an curly-brace indentation problem in the Bluetooth code while merging. On top of that... Alexey Khoroshilov brings a p54usb fix to avoid a resource leak when request_firmware_nowait fails. Amitkumar Karwar fixes a firmware hang caused by too much header data being appended for USB devices using the mwifiex driver. Arend van Spriel provides three fixes: a brcmfmac fix to relocate some driver code outside of an .init section; a scheduling while atomic fix for bcma; and, another scheduling while atomic fix for brcmsmac. Bing Zhao offers a pair of mwifiex fixes: a code change to avoid firmware timeouts on USB; and a fix for a NULL pointer dereference. Christian Lamparter adds a device ID to p54usb. Felix Fietkau implements a quartet of small ath9k fixes, including a locking fix, a list management fix, a fix to properly mark a stale buffer, and an aggregate buffering fix. Larry Finger champions a data alignment fix to make rtlwifi work better with ARM builds. Solomon Peachy reverts an earlier interrupt handling fix for cw1200 and replaces it with a new threaded oneshot irq handler implementation. Sujith Manoharan fixes an ath9k regression by reverting an earlier patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27Merge branch 'master' of ↵David S. Miller4-85/+89
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to igb and i40e. Todd provides a fix for 82580 devices in igb, where the ethtool loopback test was missing 82580 copper devices. Jesse provides five fixes/cleanups to i40e based on feedback from Joe Perches and the community. v2: fixed up patch 5 in the series based on feedback from Joe Perches and David Miller ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27Merge branch 'master' of ↵John W. Linville27-147/+128
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem Also fixed-up a badly indented closing brace... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-27i40e: clean up coccicheck reported errorsJesse Brandeburg2-5/+4
coccicheck shows: drivers/net/ethernet/intel/i40e/i40e_adminq.c:704:2-8: Replace memcpy with struct assignment drivers/net/ethernet/intel/i40e/i40e_adminq.c:763:1-7: Replace memcpy with struct assignment drivers/net/ethernet/intel/i40e/i40e_adminq.c:810:2-8: Replace memcpy with struct assignment drivers/net/ethernet/intel/i40e/i40e_common.c:510:2-8: Replace memcpy with struct assignment Fix each of them with a *a = *b; Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-09-27i40e: better return valuesJesse Brandeburg1-16/+21
As mentioned by Joe Perches, clean up return values in some functions making sure to have consistent return types, not mixing types. A couple of Joe's comments suggested returning void, but since the functions in question are ndo defined, the return values are fixed. So make a comment in the header that notes this is a function called by net_device_ops. v2: fix post increment bug in return CC: Joe Perches <joe@perches.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-09-27i40e: convert ret to aq_retJesse Brandeburg1-55/+52
When calling admin queue functions the driver should use aq_ret variable to help make clear that the return value is not a regular return variable. This allows for clean up of the return types that were previously converted to int. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-09-27i40e: small clean ups from reviewJesse Brandeburg1-3/+3
As mentioned by Joe Perches clean up a loop flow. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Joe Perches <joe@perches.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-09-27i40e: use common failure flowJesse Brandeburg1-6/+6
As mentioned by Joe Perches, we should be using foo = alloc(...) if (!foo) return -ENOMEM; return 0; Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Joe Perches <joe@perches.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-09-27igb: Fix ethtool loopback test for 82580 copperTodd Fujinaka1-0/+3
Add back 82580 loopback tests to ethtool. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-09-27Merge branch 'fixes-for-3.12' of git://gitorious.org/linux-can/linux-canDavid S. Miller1-4/+11
2013-09-26via-rhine: fix VLAN priority field (PCP, IEEE 802.1p)Roger Luethi1-2/+7
Outgoing packets sent by via-rhine have their VLAN PCP field off by one (when hardware acceleration is enabled). The TX descriptor expects only VID and PCP (without a CFI/DEI bit). Peter Boström noticed and reported the bug. Signed-off-by: Roger Luethi <rl@hellgate.ch> Cc: Peter Boström <peter.bostrom@netrounds.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-26brcmsmac: call bcma_core_pci_power_save() from non-atomic contextArend van Spriel1-0/+4
This patch adds explicit call to bcma_core_pci_power_save() from a non-atomic context resolving 'scheduling while atomic' issue. [ 13.224317] BUG: scheduling while atomic: dhcpcd/1800/0x00000202 [ 13.224322] Modules linked in: brcmsmac nouveau coretemp kvm_intel kvm cordic brcmutil bcma dell_wmi atl1c ttm mxm_wmi wmi [ 13.224354] CPU: 0 PID: 1800 Comm: dhcpcd Tainted: G W 3.11.0-wl #1 [ 13.224359] Hardware name: Alienware M11x R2/M11x R2, BIOS A04 11/23/2010 [ 13.224363] ffff880177c12c40 ffff880170fd1968 ffffffff8169af5b 0000000000000007 [ 13.224374] ffff880170fd1ad0 ffff880170fd1978 ffffffff81697ee2 ffff880170fd19f8 [ 13.224383] ffffffff816a19f5 00000000000f4240 000000000000d080 ffff880170fd1fd8 [ 13.224391] Call Trace: [ 13.224399] [<ffffffff8169af5b>] dump_stack+0x4f/0x84 [ 13.224403] [<ffffffff81697ee2>] __schedule_bug+0x43/0x51 [ 13.224409] [<ffffffff816a19f5>] __schedule+0x6e5/0x810 [ 13.224412] [<ffffffff816a1c34>] schedule+0x24/0x70 [ 13.224416] [<ffffffff816a04fc>] schedule_hrtimeout_range_clock+0x10c/0x150 [ 13.224420] [<ffffffff810684e0>] ? update_rmtp+0x60/0x60 [ 13.224424] [<ffffffff8106915f>] ? hrtimer_start_range_ns+0xf/0x20 [ 13.224429] [<ffffffff816a054e>] schedule_hrtimeout_range+0xe/0x10 [ 13.224432] [<ffffffff8104f6fb>] usleep_range+0x3b/0x40 [ 13.224437] [<ffffffffa003733a>] bcma_pcie_mdio_read.isra.5+0x8a/0x100 [bcma] [ 13.224442] [<ffffffffa00374a5>] bcma_pcie_mdio_writeread.isra.6.constprop.13+0x25/0x30 [bcma] [ 13.224448] [<ffffffffa00374f9>] bcma_core_pci_power_save+0x49/0x80 [bcma] [ 13.224452] [<ffffffffa003765d>] bcma_core_pci_up+0x2d/0x60 [bcma] [ 13.224460] [<ffffffffa03dc17c>] brcms_c_up+0xfc/0x430 [brcmsmac] [ 13.224467] [<ffffffffa03d1a7d>] brcms_up+0x1d/0x20 [brcmsmac] [ 13.224473] [<ffffffffa03d2498>] brcms_ops_start+0x298/0x340 [brcmsmac] [ 13.224478] [<ffffffff81600a12>] ? cfg80211_netdev_notifier_call+0xd2/0x5f0 [ 13.224483] [<ffffffff815fa53d>] ? packet_notifier+0xad/0x1d0 [ 13.224487] [<ffffffff81656e75>] ieee80211_do_open+0x325/0xf80 [ 13.224491] [<ffffffff8106ac09>] ? __raw_notifier_call_chain+0x9/0x10 [ 13.224495] [<ffffffff81657b41>] ieee80211_open+0x71/0x80 [ 13.224498] [<ffffffff81526267>] __dev_open+0x87/0xe0 [ 13.224502] [<ffffffff8152650c>] __dev_change_flags+0x9c/0x180 [ 13.224505] [<ffffffff815266a3>] dev_change_flags+0x23/0x70 [ 13.224509] [<ffffffff8158cd68>] devinet_ioctl+0x5b8/0x6a0 [ 13.224512] [<ffffffff8158d5c5>] inet_ioctl+0x75/0x90 [ 13.224516] [<ffffffff8150b38b>] sock_do_ioctl+0x2b/0x70 [ 13.224519] [<ffffffff8150b681>] sock_ioctl+0x71/0x2a0 [ 13.224523] [<ffffffff8114ed47>] do_vfs_ioctl+0x87/0x520 [ 13.224528] [<ffffffff8113f159>] ? ____fput+0x9/0x10 [ 13.224533] [<ffffffff8106228c>] ? task_work_run+0x9c/0xd0 [ 13.224537] [<ffffffff8114f271>] SyS_ioctl+0x91/0xb0 [ 13.224541] [<ffffffff816aa252>] system_call_fastpath+0x16/0x1b Cc: <stable@vger.kernel.org> # 3.11.x Cc: Tod Jackson <tod.jackson@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26bcma: make bcma_core_pci_{up,down}() callable from atomic contextArend van Spriel2-23/+27
This patch removes the bcma_core_pci_power_save() call from the bcma_core_pci_{up,down}() functions as it tries to schedule thus requiring to call them from non-atomic context. The function bcma_core_pci_power_save() is now exported so the calling module can explicitly use it in non-atomic context. This fixes the 'scheduling while atomic' issue reported by Tod Jackson and Joe Perches. [ 13.210710] BUG: scheduling while atomic: dhcpcd/1800/0x00000202 [ 13.210718] Modules linked in: brcmsmac nouveau coretemp kvm_intel kvm cordic brcmutil bcma dell_wmi atl1c ttm mxm_wmi wmi [ 13.210756] CPU: 2 PID: 1800 Comm: dhcpcd Not tainted 3.11.0-wl #1 [ 13.210762] Hardware name: Alienware M11x R2/M11x R2, BIOS A04 11/23/2010 [ 13.210767] ffff880177c92c40 ffff880170fd1948 ffffffff8169af5b 0000000000000007 [ 13.210777] ffff880170fd1ab0 ffff880170fd1958 ffffffff81697ee2 ffff880170fd19d8 [ 13.210785] ffffffff816a19f5 00000000000f4240 000000000000d080 ffff880170fd1fd8 [ 13.210794] Call Trace: [ 13.210813] [<ffffffff8169af5b>] dump_stack+0x4f/0x84 [ 13.210826] [<ffffffff81697ee2>] __schedule_bug+0x43/0x51 [ 13.210837] [<ffffffff816a19f5>] __schedule+0x6e5/0x810 [ 13.210845] [<ffffffff816a1c34>] schedule+0x24/0x70 [ 13.210855] [<ffffffff816a04fc>] schedule_hrtimeout_range_clock+0x10c/0x150 [ 13.210867] [<ffffffff810684e0>] ? update_rmtp+0x60/0x60 [ 13.210877] [<ffffffff8106915f>] ? hrtimer_start_range_ns+0xf/0x20 [ 13.210887] [<ffffffff816a054e>] schedule_hrtimeout_range+0xe/0x10 [ 13.210897] [<ffffffff8104f6fb>] usleep_range+0x3b/0x40 [ 13.210910] [<ffffffffa00371af>] bcma_pcie_mdio_set_phy.isra.3+0x4f/0x80 [bcma] [ 13.210921] [<ffffffffa003729f>] bcma_pcie_mdio_write.isra.4+0xbf/0xd0 [bcma] [ 13.210932] [<ffffffffa0037498>] bcma_pcie_mdio_writeread.isra.6.constprop.13+0x18/0x30 [bcma] [ 13.210942] [<ffffffffa00374ee>] bcma_core_pci_power_save+0x3e/0x80 [bcma] [ 13.210953] [<ffffffffa003765d>] bcma_core_pci_up+0x2d/0x60 [bcma] [ 13.210975] [<ffffffffa03dc17c>] brcms_c_up+0xfc/0x430 [brcmsmac] [ 13.210989] [<ffffffffa03d1a7d>] brcms_up+0x1d/0x20 [brcmsmac] [ 13.211003] [<ffffffffa03d2498>] brcms_ops_start+0x298/0x340 [brcmsmac] [ 13.211020] [<ffffffff81600a12>] ? cfg80211_netdev_notifier_call+0xd2/0x5f0 [ 13.211030] [<ffffffff815fa53d>] ? packet_notifier+0xad/0x1d0 [ 13.211064] [<ffffffff81656e75>] ieee80211_do_open+0x325/0xf80 [ 13.211076] [<ffffffff8106ac09>] ? __raw_notifier_call_chain+0x9/0x10 [ 13.211086] [<ffffffff81657b41>] ieee80211_open+0x71/0x80 [ 13.211101] [<ffffffff81526267>] __dev_open+0x87/0xe0 [ 13.211109] [<ffffffff8152650c>] __dev_change_flags+0x9c/0x180 [ 13.211117] [<ffffffff815266a3>] dev_change_flags+0x23/0x70 [ 13.211127] [<ffffffff8158cd68>] devinet_ioctl+0x5b8/0x6a0 [ 13.211136] [<ffffffff8158d5c5>] inet_ioctl+0x75/0x90 [ 13.211147] [<ffffffff8150b38b>] sock_do_ioctl+0x2b/0x70 [ 13.211155] [<ffffffff8150b681>] sock_ioctl+0x71/0x2a0 [ 13.211169] [<ffffffff8114ed47>] do_vfs_ioctl+0x87/0x520 [ 13.211180] [<ffffffff8113f159>] ? ____fput+0x9/0x10 [ 13.211198] [<ffffffff8106228c>] ? task_work_run+0x9c/0xd0 [ 13.211202] [<ffffffff8114f271>] SyS_ioctl+0x91/0xb0 [ 13.211208] [<ffffffff816aa252>] system_call_fastpath+0x16/0x1b [ 13.211217] NOHZ: local_softirq_pending 202 The issue was introduced in v3.11 kernel by following commit: commit aa51e598d04c6acf5477934cd6383f5a17ce9029 Author: Hauke Mehrtens <hauke@hauke-m.de> Date: Sat Aug 24 00:32:31 2013 +0200 brcmsmac: use bcma PCIe up and down functions replace the calls to bcma_core_pci_extend_L1timer() by calls to the newly introduced bcma_core_pci_ip() and bcma_core_pci_down() Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> This fix has been discussed with Hauke Mehrtens [1] selection option 3) and is intended for v3.12. Ref: [1] http://mid.gmane.org/5239B12D.3040206@hauke-m.de Cc: <stable@vger.kernel.org> # 3.11.x Cc: Tod Jackson <tod.jackson@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26brcmfmac: obtain platform data upon module initializationArend van Spriel4-23/+24
The driver uses platform_driver_probe() to obtain platform data if any. However, that function is placed in the .init section so it must be called upon driver module initialization. The problem was reported by Fenguang Wu resulting in a kernel oops because the .init section was already freed. [ 48.966342] Switched to clocksource tsc [ 48.970002] kernel tried to execute NX-protected page - exploit attempt? (uid: 0) [ 48.970851] BUG: unable to handle kernel paging request at ffffffff82196446 [ 48.970957] IP: [<ffffffff82196446>] classes_init+0x26/0x26 [ 48.970957] PGD 1e76067 PUD 1e77063 PMD f388063 PTE 8000000002196163 [ 48.970957] Oops: 0011 [#1] [ 48.970957] CPU: 0 PID: 17 Comm: kworker/0:1 Not tainted 3.11.0-rc7-00444-gc52dd7f #23 [ 48.970957] Workqueue: events brcmf_driver_init [ 48.970957] task: ffff8800001d2000 ti: ffff8800001d4000 task.ti: ffff8800001d4000 [ 48.970957] RIP: 0010:[<ffffffff82196446>] [<ffffffff82196446>] classes_init+0x26/0x26 [ 48.970957] RSP: 0000:ffff8800001d5d40 EFLAGS: 00000286 [ 48.970957] RAX: 0000000000000001 RBX: ffffffff820c5620 RCX: 0000000000000000 [ 48.970957] RDX: 0000000000000001 RSI: ffffffff816f7380 RDI: ffffffff820c56c0 [ 48.970957] RBP: ffff8800001d5d50 R08: ffff8800001d2508 R09: 0000000000000002 [ 48.970957] R10: 0000000000000000 R11: 0001f7ce298c5620 R12: ffff8800001c76b0 [ 48.970957] R13: ffffffff81e91d40 R14: 0000000000000000 R15: ffff88000e0ce300 [ 48.970957] FS: 0000000000000000(0000) GS:ffffffff81e84000(0000) knlGS:0000000000000000 [ 48.970957] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 48.970957] CR2: ffffffff82196446 CR3: 0000000001e75000 CR4: 00000000000006b0 [ 48.970957] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 48.970957] DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 [ 48.970957] Stack: [ 48.970957] ffffffff816f7df8 ffffffff820c5620 ffff8800001d5d60 ffffffff816eeec9 [ 48.970957] ffff8800001d5de0 ffffffff81073dc5 ffffffff81073d68 ffff8800001d5db8 [ 48.970957] 0000000000000086 ffffffff820c5620 ffffffff824f7fd0 0000000000000000 [ 48.970957] Call Trace: [ 48.970957] [<ffffffff816f7df8>] ? brcmf_sdio_init+0x18/0x70 [ 48.970957] [<ffffffff816eeec9>] brcmf_driver_init+0x9/0x10 [ 48.970957] [<ffffffff81073dc5>] process_one_work+0x1d5/0x480 [ 48.970957] [<ffffffff81073d68>] ? process_one_work+0x178/0x480 [ 48.970957] [<ffffffff81074188>] worker_thread+0x118/0x3a0 [ 48.970957] [<ffffffff81074070>] ? process_one_work+0x480/0x480 [ 48.970957] [<ffffffff8107aa17>] kthread+0xe7/0xf0 [ 48.970957] [<ffffffff810829f7>] ? finish_task_switch.constprop.57+0x37/0xd0 [ 48.970957] [<ffffffff8107a930>] ? __kthread_parkme+0x80/0x80 [ 48.970957] [<ffffffff81a6923a>] ret_from_fork+0x7a/0xb0 [ 48.970957] [<ffffffff8107a930>] ? __kthread_parkme+0x80/0x80 [ 48.970957] Code: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc <cc> cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc [ 48.970957] RIP [<ffffffff82196446>] classes_init+0x26/0x26 [ 48.970957] RSP <ffff8800001d5d40> [ 48.970957] CR2: ffffffff82196446 [ 48.970957] ---[ end trace 62980817cd525f14 ]--- Cc: <stable@vger.kernel.org> # 3.10.x, 3.11.x Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26mwifiex: fix NULL pointer dereference in usb suspend handlerBing Zhao1-7/+0
Bug 60815 - Interface hangs in mwifiex_usb https://bugzilla.kernel.org/show_bug.cgi?id=60815 [ 2.883807] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 [ 2.883813] IP: [<ffffffff815a65e0>] pfifo_fast_enqueue+0x90/0x90 [ 2.883834] CPU: 1 PID: 3220 Comm: kworker/u8:90 Not tainted 3.11.1-monotone-l0 #6 [ 2.883834] Hardware name: Microsoft Corporation Surface with Windows 8 Pro/Surface with Windows 8 Pro, BIOS 1.03.0450 03/29/2013 On Surface Pro, suspend to ram gives a NULL pointer dereference in pfifo_fast_enqueue(). The stack trace reveals that the offending call is clearing carrier in mwifiex_usb suspend handler. Since commit 1499d9f "mwifiex: don't drop carrier flag over suspend" has removed the carrier flag handling over suspend/resume in SDIO and PCIe drivers, I'm removing it in USB driver too. This also fixes the bug for Surface Pro. Cc: <stable@vger.kernel.org> # 3.5+ Tested-by: Dmitry Khromov <icechrome@gmail.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26mwifiex: fix hang issue for USB chipsetsAmitkumar Karwar3-4/+4
Bug 60815 - Interface hangs in mwifiex_usb https://bugzilla.kernel.org/show_bug.cgi?id=60815 We have 4 bytes of interface header for packets delivered to SDIO and PCIe, but not for USB interface. In Tx AMSDU case, currently 4 bytes of garbage data is unnecessarily appended for USB packets. This sometimes leads to a firmware hang, because it may not interpret the data packet correctly. Problem is fixed by removing this redundant headroom for USB. Cc: <stable@vger.kernel.org> # 3.5+ Tested-by: Dmitry Khromov <icechrome@gmail.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26p54usb: add USB ID for Corega WLUSB2GTST USB adapterChristian Lamparter1-0/+1
Added USB ID for Corega WLUSB2GTST USB adapter. Cc: <stable@vger.kernel.org> Reported-by: Joerg Kalisch <the_force@gmx.de> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26cw1200: Use a threaded oneshot irq handler for cw1200_spiSolomon Peachy1-3/+4
This supercedes the older patch ("cw1200: Don't perform SPI transfers in interrupt context") that badly attempted to fix this problem. This is a far simpler solution, which has the added benefit of actually working. Signed-off-by: Solomon Peachy <pizza@shaftnet.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26Revert "cw1200: Don't perform SPI transfers in interrupt context"Solomon Peachy4-33/+4
This reverts commit aec8e88c947b7017e2b4bbcb68a4bfc4a1f8ad35. This solution turned out to cause interrupt delivery problems, and rather than trying to fix this approach, it has been scrapped in favor of an alternative (and far simpler) implementation. Signed-off-by: Solomon Peachy <pizza@shaftnet.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26mwifiex: fix PCIe hs_cfg cancel cmd timeoutBing Zhao1-3/+2
For pcie8897, the hs_cfg cancel command (0xe5) times out when host comes out of suspend. This is caused by an incompleted host sleep handshake between driver and firmware. Like SDIO interface, PCIe also needs to go through firmware power save events to complete the handshake for host sleep configuration. Only USB interface doesn't require power save events for hs_cfg. Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26rtlwifi: Align private space in rtl_priv structLarry Finger1-1/+1
The private array at the end of the rtl_priv struct is not aligned. On ARM architecture, this causes an alignment trap and is fixed by aligning that array with __align(sizeof(void *)). That should properly align that space according to the requirements of all architectures. Reported-by: Jason Andrews <jasona@cadence.com> Tested-by: Jason Andrews <jasona@cadence.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: add txq locking for ath_tx_aggr_startFelix Fietkau1-0/+6
Prevents race conditions when un-aggregated frames are pending in the driver. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26p54usb: fix leak at failure path in p54u_load_firmware()Alexey Khoroshilov1-0/+1
If request_firmware_nowait() fails in p54u_load_firmware(), p54u_load_firmware_cb is not called and no one decrements usb_dev refcnt. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: don't use BAW tracking on PS responses for non-AMPDU packetsFelix Fietkau1-2/+4
When .release_buffered_frames was implemented, only A-MPDU packets were buffered internally. Now that this has changed, the BUF_AMPDU flag needs to be checked before calling ath_tx_addto_baw Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: Fix regression in LNA diversitySujith Manoharan1-7/+0
The commit "ath9k: Optimize LNA check" tried to use the "rs_firstaggr" flag to optimize the LNA combining algorithm when processing subframes in an A-MPDU. This doesn't appear to work well in practice, so revert it and use the old method of relying on "rs_moreaggr". Cc: stable@vger.kernel.org # 3.11 Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: do not link bf_next across multiple A-MPDUsFelix Fietkau1-1/+3
This might trip up tx completion processing, although the condition that triggers this should not (yet) occur in practice. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: fix stale flag handling on buffer cloneFelix Fietkau1-0/+1
Fixes a regression from commit "ath9k: shrink a few data structures by reordering fields" When cloning a buffer, the stale flag (part of bf_state now) needs to be reset after copying the state to prevent tx processing hangs. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26Merge branch 'master' of ↵John W. Linville7-40/+42
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
2013-09-24ipv6: udp packets following an UFO enqueued packet need also be handled by UFOHannes Frederic Sowa1-31/+22
In the following scenario the socket is corked: If the first UDP packet is larger then the mtu we try to append it to the write queue via ip6_ufo_append_data. A following packet, which is smaller than the mtu would be appended to the already queued up gso-skb via plain ip6_append_data. This causes random memory corruptions. In ip6_ufo_append_data we also have to be careful to not queue up the same skb multiple times. So setup the gso frame only when no first skb is available. This also fixes a shortcoming where we add the current packet's length to cork->length but return early because of a packet > mtu with dontfrag set (instead of sutracting it again). Found with trinity. Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-24qlge: call ql_core_dump() only if dump memory was allocated.malahal@us.ibm.com2-3/+3
Also changed a log message to indicate that memory was not allocated instead of memory not available! Signed-off-by: Malahal Naineni <malahal@us.ibm.com> Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-24skge: fix invalid value passed to pci_unmap_sigleMikulas Patocka1-3/+6
In my patch c194992cbe71c20bb3623a566af8d11b0bfaa721 ("skge: fix broken driver") I didn't fix the skge bug correctly. The value of the new mapping (not old) was passed to pci_unmap_single. If we enable CONFIG_DMA_API_DEBUG, it results in this warning: WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:986 check_sync+0x4c4/0x580() skge 0000:02:07.0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000023a0096c0] [size=1536 bytes] This patch makes the skge driver pass the correct value to pci_unmap_single and fixes the warning. It copies the old descriptor to on-stack variable "ee" and unmaps it if mapping of the new descriptor succeeded. This patch should be backported to 3.11-stable. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-24net: raw: do not report ICMP redirects to user spaceDuan Jiong2-2/+6
Redirect isn't an error condition, it should leave the error handler without touching the socket. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-24net: udp: do not report ICMP redirects to user spaceDuan Jiong2-2/+4
Redirect isn't an error condition, it should leave the error handler without touching the socket. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-23mrp: add periodictimer to allow retries when packets get lostNoel Burton-Krahn2-0/+28
MRP doesn't implement the periodictimer in 802.1Q, so it never retries if packets get lost. I ran into this problem when MRP sent a MVRP JoinIn before the interface was fully up. The JoinIn was lost, MRP didn't retry, and MVRP registration failed. Tested against Juniper QFabric switches Signed-off-by: Noel Burton-Krahn <noel@burton-krahn.com> Acked-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-23net/lapb: re-send packets on timeoutjosselin.costanzi@mobile-devices.fr1-0/+1
Actually re-send packets when the T1 timer runs out. This fixes a bug where packets are waiting on the write queue until disconnection when no other traffic is outstanding. Signed-off-by: Josselin Costanzi <josselin.costanzi@mobile-devices.fr> Signed-off-by: Maxime Jayat <maxime.jayat@mobile-devices.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-23Bluetooth: btusb: Add support for Belkin F8065bfKen O'Brien1-0/+3
Add generic rule on encountering Belkin bluetooth usb device F8065bf. Relevant section from /sys/kernel/debug/usb/devices: T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=050d ProdID=065a Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=0002723E2D29 C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms Signed-off-by: Ken O'Brien <kernel@kenobrien.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-23Merge branch 'bnx2x'David S. Miller4-38/+44
Yuval Mintz says: ==================== This patch contains various bug fixes, half of which are SR-IOV related (some fixing issues in the recently added VF RSS support), while the other fix a wide assortments of issues in the driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-23bnx2x: handle known but unsupported VF messagesAriel Elior1-26/+24
Commit b9871bcf "bnx2x: VF RSS support - PF side" has deprecated one of the previous existing messages. If an old VF driver were to send this message to the PF then the PF will not reply and leave the mailbox in an unsteady state (and cause a timeout on the VF side). Wait until firmware ack is written before unlocking channel Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-23bnx2x: prevent masked MCP parities from appearingYuval Mintz1-0/+8
During flows which mask block attentions (e.g., register dump) all parities are masked. However, unlike other blocks the MCP's attention is not masked inside the block but rather the indication to the driver. If another attention (e.g., link change) will occour while there's an MCP parity, the driver will ignore the fact that the parity is masked and erroneously report a parity. This patch forces the driver to read the MCP masking while checking for parities. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-23bnx2x: prevent masking error from cnicYuval Mintz1-2/+1
During error flows while loading cnic the return value was incorrectly replaced by that of bnx2x_set_real_num_queues(); If that function was to finish successfully then the cnic would have mistakenly thought the load ended successfully, causing issues (& panics) later on. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 08:32:07 +0000