summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2011-01-19Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds6-29/+32
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Unify "numa=" command line option handling Revert "x86: Make relocatable kernel work with new binutils"
2011-01-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds41-258/+512
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (41 commits) sctp: user perfect name for Delayed SACK Timer option net: fix can_checksum_protocol() arguments swap Revert "netlink: test for all flags of the NLM_F_DUMP composite" gianfar: Fix misleading indentation in startup_gfar() net/irda/sh_irda: return to RX mode when TX error net offloading: Do not mask out NETIF_F_HW_VLAN_TX for vlan. USB CDC NCM: tx_fixup() race condition fix ns83820: Avoid bad pointer deref in ns83820_init_one(). ipv6: Silence privacy extensions initialization bnx2x: Update bnx2x version to 1.62.00-4 bnx2x: Fix AER setting for BCM57712 bnx2x: Fix BCM84823 LED behavior bnx2x: Mark full duplex on some external PHYs bnx2x: Fix BCM8073/BCM8727 microcode loading bnx2x: LED fix for BCM8727 over BCM57712 bnx2x: Common init will be executed only once after POR bnx2x: Swap BCM8073 PHY polarity if required iwlwifi: fix valid chain reading from EEPROM ath5k: fix locking in tx_complete_poll_work ath9k_hw: do PA offset calibration only on longcal interval ...
2011-01-19sctp: user perfect name for Delayed SACK Timer optionShan Wei2-2/+3
The option name of Delayed SACK Timer should be SCTP_DELAYED_SACK, not SCTP_DELAYED_ACK. Left SCTP_DELAYED_ACK be concomitant with SCTP_DELAYED_SACK, for making compatibility with existing applications. Reference: 8.1.19. Get or Set Delayed SACK Timer (SCTP_DELAYED_SACK) (http://tools.ietf.org/html/draft-ietf-tsvwg-sctpsocket-25) Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Acked-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-19net: fix can_checksum_protocol() arguments swapEric Dumazet1-1/+1
commit 0363466866d901fbc (net offloading: Convert checksums to use centrally computed features.) mistakenly swapped can_checksum_protocol() arguments. This broke IPv6 on bnx2 for instance, on NIC without TCPv6 checksum offloads. Reported-by: Hans de Bruin <jmdebruin@xmsnet.nl> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-19Revert "netlink: test for all flags of the NLM_F_DUMP composite"David S. Miller5-6/+6
This reverts commit 0ab03c2b1478f2438d2c80204f7fef65b1bca9cf. It breaks several things including the avahi daemon. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-19x86: Unify "numa=" command line option handlingJan Beulich5-20/+30
In order to be able to suppress the use of SRAT tables that 32-bit Linux can't deal with (in one case known to lead to a non-bootable system, unless disabling ACPI altogether), move the "numa=" option handling to common code. Signed-off-by: Jan Beulich <jbeulich@novell.com> Reviewed-by: Thomas Renninger <trenn@suse.de> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Renninger <trenn@suse.de> LKML-Reference: <4D36B581020000780002D0FF@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-19Revert "x86: Make relocatable kernel work with new binutils"Ingo Molnar1-9/+2
This reverts commit 86b1e8dd83cb ("x86: Make relocatable kernel work with new binutils"). Markus Trippelsdorf reported a boot failure caused by this patch. The real solution to the original patch will likely involve an arch-generic solution to define an overlaid jiffies_64 and jiffies variables. Until that's done and tested on all architectures revert this commit to solve the regression. Reported-and-bisected-by: Markus Trippelsdorf <markus@trippelsdorf.de> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: "Lu, Hongjiu" <hongjiu.lu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org>, Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <4D36A759.60704@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-18gianfar: Fix misleading indentation in startup_gfar()Anton Vorontsov1-1/+1
Just stumbled upon the issue while looking for another bug. The code looks correct, the indentation is not. Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18net/irda/sh_irda: return to RX mode when TX errorKuninori Morimoto1-2/+12
sh_irda can not use RX/TX in same time, but this driver didn't return to RX mode when TX error occurred. This patch care xmit error case to solve this issue. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18net offloading: Do not mask out NETIF_F_HW_VLAN_TX for vlan.Jesse Gross1-2/+2
In netif_skb_features() we return only the features that are valid for vlans if we have a vlan packet. However, we should not mask out NETIF_F_HW_VLAN_TX since it enables transmission of vlan tags and is obviously valid. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18USB CDC NCM: tx_fixup() race condition fixAlexey Orishko1-7/+12
- tx_fixup() can be called from either timer callback or from xmit() in usbnet, so spinlock is added to avoid concurrency-related problem. - minor correction due to checkpatch warning for some line over 80 chars after previous patch was applied. Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18ns83820: Avoid bad pointer deref in ns83820_init_one().Jesper Juhl1-3/+2
In drivers/net/ns83820.c::ns83820_init_one() we dynamically allocate memory via alloc_etherdev(). We then call PRIV() on the returned storage which is 'return netdev_priv()'. netdev_priv() takes the pointer it is passed and adds 'ALIGN(sizeof(struct net_device), NETDEV_ALIGN)' to it and returns it. Then we test the resulting pointer for NULL, which it is unlikely to be at this point, and later dereference it. This will go bad if alloc_etherdev() actually returned NULL. This patch reworks the code slightly so that we test for a NULL pointer (and return -ENOMEM) directly after calling alloc_etherdev(). Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18ipv6: Silence privacy extensions initializationRomain Francoise1-3/+0
When a network namespace is created (via CLONE_NEWNET), the loopback interface is automatically added to the new namespace, triggering a printk in ipv6_add_dev() if CONFIG_IPV6_PRIVACY is set. This is problematic for applications which use CLONE_NEWNET as part of a sandbox, like Chromium's suid sandbox or recent versions of vsftpd. On a busy machine, it can lead to thousands of useless "lo: Disabled Privacy Extensions" messages appearing in dmesg. It's easy enough to check the status of privacy extensions via the use_tempaddr sysctl, so just removing the printk seems like the most sensible solution. Signed-off-by: Romain Francoise <romain@orebokech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18bnx2x: Update bnx2x version to 1.62.00-4Yaniv Rosner1-2/+2
Update bnx2x version to 1.62.00-4 Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18bnx2x: Fix AER setting for BCM57712Yaniv Rosner1-1/+1
Fix AER settings for BCM57712 to allow accessing all device addresses range in CL45 MDC/MDIO Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18bnx2x: Fix BCM84823 LED behaviorYaniv Rosner2-1/+21
Fix BCM84823 LED behavior which may show on some systems Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18bnx2x: Mark full duplex on some external PHYsYaniv Rosner1-1/+8
Device may show incorrect duplex mode for devices with external PHY Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18bnx2x: Fix BCM8073/BCM8727 microcode loadingYaniv Rosner1-30/+43
Improve microcode loading verification before proceeding to next stage Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18bnx2x: LED fix for BCM8727 over BCM57712Yaniv Rosner1-1/+17
LED on BCM57712+BCM8727 systems requires different settings Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18bnx2x: Common init will be executed only once after PORYaniv Rosner1-0/+11
Common init used to be called by the driver when the first port comes up, mainly to reset and reload external PHY microcode. However, in case management driver is active on the other port, traffic would halted. So limit the common init to be done only once after POR. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18bnx2x: Swap BCM8073 PHY polarity if requiredYaniv Rosner2-0/+46
Enable controlling BCM8073 PN polarity swap through nvm configuration, which is required in certain systems Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18Linux 2.6.38-rc1v2.6.38-rc1Linus Torvalds1-2/+2
2011-01-18Merge branch 'hwmon-for-linus' of ↵Linus Torvalds3-4/+28
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (lm93) Add support for LM94
2011-01-18Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds1-11/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Validate cpu early in perf_event_alloc() perf: Find_get_context: fix the per-cpu-counter check perf: Fix contexted inheritance
2011-01-18Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds2-7/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Clear irqstack thread_info x86: Make relocatable kernel work with new binutils
2011-01-18Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds58-129/+3408
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (26 commits) MIPS: Malta: enable Cirrus FB console MIPS: add CONFIG_VIRTUALIZATION for virtio support MIPS: Implement __read_mostly MIPS: ath79: add common WMAC device for AR913X based boards MIPS: ath79: Add initial support for the Atheros AP81 reference board MIPS: ath79: add common SPI controller device SPI: Add SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCs MIPS: ath79: add common GPIO buttons device MIPS: ath79: add common watchdog device MIPS: ath79: add common GPIO LEDs device MIPS: ath79: add initial support for the Atheros PB44 reference board MIPS: ath79: utilize the MIPS multi-machine support MIPS: ath79: add GPIOLIB support MIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCs MIPS: jump label: Add MIPS support. MIPS: Use WARN() in uasm for better diagnostics. MIPS: Optimize TLB handlers for Octeon CPUs MIPS: Add LDX and LWX instructions to uasm. MIPS: Use BBIT instructions in TLB handlers MIPS: Declare uasm bbit0 and bbit1 functions. ...
2011-01-18Merge branch 'master' of ↵David S. Miller12-24/+36
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-01-18hwmon: (lm93) Add support for LM94Guenter Roeck3-4/+28
This patch adds basic support for LM94 to the LM93 driver. LM94 specific sensors and features are not supported. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2011-01-18iwlwifi: fix valid chain reading from EEPROMWey-Yi Guy1-1/+1
When read valid tx/rx chains from EEPROM, there is a bug to use the tx chain value for both tx and rx, the result of this cause low receive throughput on 1x2 devices becuase rx will only utilize single chain instead of two chains Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-18ath5k: fix locking in tx_complete_poll_workBob Copeland1-0/+4
ath5k_reset must be called with sc->lock. Since the tx queue watchdog runs in a workqueue and accesses sc, it's appropriate to just take the lock over the whole function. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-18perf: Validate cpu early in perf_event_alloc()Oleg Nesterov1-4/+6
Starting from perf_event_alloc()->perf_init_event(), the kernel assumes that event->cpu is either -1 or the valid CPU number. Change perf_event_alloc() to validate this argument early. This also means we can remove the similar check in find_get_context(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Roland McGrath <roland@redhat.com> Cc: gregkh@suse.de Cc: stable@kernel.org LKML-Reference: <20110118161032.GC693@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-18perf: Find_get_context: fix the per-cpu-counter checkOleg Nesterov1-1/+1
If task == NULL, find_get_context() should always check that cpu is correct. Afaics, the bug was introduced by 38a81da2 "perf events: Clean up pid passing", but even before that commit "&& cpu != -1" was not exactly right, -ESRCH from find_task_by_vpid() is not accurate. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Roland McGrath <roland@redhat.com> Cc: gregkh@suse.de Cc: stable@kernel.org LKML-Reference: <20110118161008.GB693@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-18MIPS: Malta: enable Cirrus FB consoleAurelien Jarno1-0/+3
While most users of a physical Malta board are using the serial port as the console, a lot of QEMU users would prefer to interact with a graphical console. Enable the Cirrus FB support in the Malta default configuration to make that possible. Note that the default console will still be the serial port, users have to pass "console=tty0" to the kernel to use the Cirrus FB. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2001/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: add CONFIG_VIRTUALIZATION for virtio supportAurelien Jarno1-0/+16
Add CONFIG_VIRTUALIZATION to the MIPS architecture and include the the virtio code there. Used to enable the virtio drivers under QEMU. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2002/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Implement __read_mostlyDavid Daney2-1/+3
Just do what everyone else is doing by placing __read_mostly things in the .data.read_mostly section. mips_io_port_base can not be read-only (const) and writable (__read_mostly) at the same time. One of them has to go, so I chose to eliminate the __read_mostly. It will still get stuck in a portion of memory that is not adjacent to things that are written, and thus not be on a dirty cache line, for whatever that is worth. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1702/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: add common WMAC device for AR913X based boardsGabor Juhos6-0/+92
Add common platform_device and helper code to make the registration of the built-in wireless MAC easier on the Atheros AR9130/AR9132 based boards. Also register the WMAC device on the AR81 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Imre Kaloz <kaloz@openwrt.org>, Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1962/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: Add initial support for the Atheros AP81 reference boardGabor Juhos4-0/+104
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1952/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: add common SPI controller deviceGabor Juhos6-0/+84
Several boards are using the built-in SPI controller of the AR71XX/AR724X/AR913X SoCs. This patch adds common platform_device and helper code to register it. Additionally, the patch registers the SPI bus on the PB44 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1956/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18SPI: Add SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCsGabor Juhos4-0/+324
The Atheros AR71XX/AR724X/AR913X SoCs have a built-in SPI controller. This patch implements a driver for that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: spi-devel-general@lists.sourceforge.net Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: linux-mips@linux-mips.org Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1960/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: add common GPIO buttons deviceGabor Juhos5-0/+113
Almost all boards have one or more push buttons connected to GPIO lines. This patch adds common code to register a platform_device for them. The patch also adds support for the buttons on the PB44 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1954/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: add common watchdog deviceGabor Juhos3-0/+12
All supported SoCs have a built-in hardware watchdog driver. This patch registers a platform_device for that to make it usable. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1955/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: add common GPIO LEDs deviceGabor Juhos5-0/+100
Almost all boards have one or more LEDs connected to GPIO lines. This patch adds common code to register a platform_device for them. The patch also adds support for the LEDs on the PB44 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1953/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: add initial support for the Atheros PB44 reference boardGabor Juhos4-0/+73
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1950/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: utilize the MIPS multi-machine supportGabor Juhos3-0/+37
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1949/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: add GPIOLIB supportGabor Juhos7-2/+252
This patch implements generic GPIO routines for the built-in GPIO controllers of the Atheros AR71XX/AR724X/AR913X SoCs. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1948/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCsGabor Juhos20-0/+1365
This patch adds initial support for various Atheros SoCs based on the MIPS 24Kc core. The following models are supported at the moment: - AR7130 - AR7141 - AR7161 - AR9130 - AR9132 - AR7240 - AR7241 - AR7242 The current patch contains minimal support only, but the resulting kernel can boot into user-space with using of an initramfs image on various boards which are using these SoCs. Support for more built-in devices and individual boards will be implemented in further patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1947/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: jump label: Add MIPS support.David Daney5-0/+110
In order not to be left behind, we add jump label support for MIPS. Tested on 64-bit big endian (Octeon), and 32-bit little endian (malta/qemu). Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Baron <jbaron@redhat.com> Patchwork: https://patchwork.linux-mips.org/patch/1923/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Use WARN() in uasm for better diagnostics.David Daney1-24/+16
On the off chance that uasm ever warns about overflow, there is no way to know what the offending instruction is. Change the printks to WARNs, so we can get a nice stack trace. It has the added benefit of being much more noticeable than the short single line warning message, so is less likely to be ignored. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1905/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Optimize TLB handlers for Octeon CPUsDavid Daney1-51/+310
Octeon can use scratch registers in the TLB handlers. Octeon II can use LDX instructions. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1904/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Add LDX and LWX instructions to uasm.David Daney3-1/+24
Needed by Octeon II optimized TLB handlers. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Pachwork: https://patchwork.linux-mips.org/patch/1903/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>