summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2014-01-31ALSA: hda/hdmi - allow PIN_OUT to be dynamically enabledStephen Warren1-4/+36
Commit 384a48d71520 "ALSA: hda: HDMI: Support codecs with fewer cvts than pins" dynamically enabled each pin widget's PIN_OUT only when the pin was actively in use. This was required on certain NVIDIA CODECs for correct operation. Specifically, if multiple pin widgets each had their mux input select the same audio converter widget and each pin widget had PIN_OUT enabled, then only one of the pin widgets would actually receive the audio, and often not the one the user wanted! However, this apparently broke some Intel systems, and commit 6169b673618b "ALSA: hda - Always turn on pins for HDMI/DP" reverted the dynamic setting of PIN_OUT. This in turn broke the afore-mentioned NVIDIA CODECs. This change supports either dynamic or static handling of PIN_OUT, selected by a flag set up during CODEC initialization. This flag is enabled for all recent NVIDIA GPUs. Reported-by: Uosis <uosisl@gmail.com> Cc: <stable@vger.kernel.org> # v3.13 Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-30ALSA: hda - add headset mic detect quirks for another Dell laptopHui Wang1-0/+1
When we plug a 3-ring headset on the Dell machine (Vendor ID: 0x10ec0255, Subsystem ID: 0x1028064d), the headset mic can't be detected, after apply this patch, the headset mic can work well. BugLink: https://bugs.launchpad.net/bugs/1260303 Cc: David Henningsson <david.henningsson@canonical.com> Tested-by: Doro Wu <fan-cheng.wu@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-30Merge branch 'xonar-dg' of git://git.alsa-project.org/alsa-kprivate into ↵Takashi Iwai9-501/+713
for-next This completes the hardware support for the Asus Xonar DG/DGX cards, and makes them actually usable. This is v4 of Roman's patch set with some small formatting changes.
2014-01-29ALSA: oxygen: Xonar DG(X): cleanup and minor changesRoman Volkov3-33/+11
Remove old SPI control functions, change anti-pop init sequence, remove some garbage from structures. The 'Apply' functions must be called at the mixer initialization, otherwise mixer settings sometimes will not be applied at startup. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: Xonar DG(X): modify high-pass filter controlRoman Volkov1-2/+6
Change the 'put' function of the high-pass filter control to use the new SPI functions. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: Xonar DG(X): modify input select functionsRoman Volkov2-25/+30
First of all, we should not touch the GPIOs. They are not for selecting the capture source, but they seems just enable the whole audio input curcuit. The 'put' function calls the 'apply' functions to change register values. Change the order of capture sources. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: Xonar DG(X): modify capture volume functionsRoman Volkov2-8/+26
Modify the input_vol_* functions to use the new SPI routines, There is a new applying function that will be called when the capture source changed. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: Xonar DG(X): use headphone volume controlRoman Volkov1-32/+83
I tried both variants: volume control and impedance selector. In the first case one minus is that we can't change the volume of multichannel output without additional software volume control. However, I am using this variant for the last three months and this seems good. All multichannel speaker systems have internal amplifier with the volume control included, but not all headphones have this regulator. In the second case, my software volume control does not save the value after reboot. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: Xonar DG(X): modify playback output selectRoman Volkov3-33/+47
Change the order of elements in the output select control. This will reduce the number of relay switches. Change 'put' function to call the oxygen_update_dac_routing() function. Otherwise multichannel playback does not work. Also there is a new function to apply settings, this prevents from duplicating the code. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: Xonar DG(X): capture from I2S channel 1, not 2Roman Volkov1-1/+1
Actually CS4245 connected to the I2S channel 1 for capture, not channel 2. Otherwise capturing and playback does not work for CS4245. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: Xonar DG(X): move the mixer code into another fileRoman Volkov4-364/+411
Moving the mixer code away makes things easier. The mixer will control the driver, so the functions of the driver need to be non-static. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: modify CS4245 register dumping functionRoman Volkov1-3/+4
Change the function to read the data from the new shadow buffer. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: modify adjust_dg_dac_routing functionRoman Volkov2-24/+22
When selecting the audio output destinations (headphones, FP headphones, multichannel output), the channel routing should be changed depending on what destination selected. Also unnecessary I2S channels are digitally muted. This function called when the user selects the destination in the ALSA mixer. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: Xonar DG(X): modify DAC/ADC parameters functionRoman Volkov1-20/+38
When selecting the audio sample rate for CS4245, the MCLK divider should also be changed. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: Xonar DG(X): modify initialization functionsRoman Volkov2-65/+42
Change CS4245 initialization: different sequence and GPIO values, according to datasheets and reverse-engineering information. Change cleanup/resume/suspend functions, since they use initialization. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: Xonar DG(X): add new CS4245 SPI functionsRoman Volkov3-4/+73
Add the new SPI write and read functions. The SPI read function is used for creating initial registers dump and may be used for debugging purposes. SPI operations are cached, so there is a new function to manage the cache (shadow). I have to remove the shift from the CS4245_SPI_* constants, since when we are performing the reading, we need to shift by 8 instead of 16. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: additional definitions for the Xonar DG/DGX cardRoman Volkov2-14/+23
Add additional constants to the xonar_dg.h file: capture and playback sources. Move GPIO_* constants and the dg struct to the header file from the xonar_dg.c file. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: change description of the xonar_dg.c fileRoman Volkov1-5/+13
Add some additional information in comments and my copyright. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: export oxygen_update_dac_routing symbolRoman Volkov1-0/+1
When the user switches the output from stereo to multichannel or vice versa, the driver needs to update the channel routing. Instead of creating additional subroutines, I better export existing oxygen_update_dac_routing symbol from the oxygen mixer and call this function. It calls model.adjust_dac_routing() and my function does the work. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: add mute mask for the OXYGEN_PLAY_ROUTING registerRoman Volkov1-0/+1
The Xonar DG/DGX driver needs this mask to mute unnecessary channels. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: modify the SPI writing functionRoman Volkov2-12/+7
Modify the oxygen_write_spi() function to use the newly introduced oxygen_wait_spi() function. Change return value from void to int, so it can return error codes. Older drivers just ignore that return value, new drivers can check this value. We need to wait AFTER initiating the SPI transaction, otherwise read operation will not work. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: add the separate SPI waiting functionRoman Volkov1-0/+18
The oxygen_wait_spi() function now performs waiting when the SPI bus completes a transaction. Introduce the timeout error checking and increase timeout to 200 from 40. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: hda - Add parameter for dumping processing coefficientsDavid Henningsson2-2/+33
Processing coefficients are often a vital part of the codec's configuration, so dumping them can be important. However, because they are undocumented and secret, we do not want to enable this for all codecs by default. Therefore instead add this as a debugging parameter. I have prepared for codecs that want to enable this by default by the extra dump_coef bitfield, but unsure if we want to do that as long as the (unlikely, but still) race remains. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-29Merge tag 'asoc-v3.14-rc1' of ↵Takashi Iwai93-296/+525
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.14 A few fixes, all in drivers. Nothing stands out particularly, the biggest set of fixes is some build coverage issues from Sachin.
2014-01-27Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/fsl', ↵Mark Brown296-10957/+12107
'asoc/fix/omap', 'asoc/fix/samsung', 'asoc/fix/simple', 'asoc/fix/tlv320aic32x4' and 'asoc/fix/wm5100' into asoc-linus
2014-01-27ASoC: tlv320aic32x4: Fix MICPGA input configurationMarkus Pargmann2-4/+8
Currently the Negative Terminal Input Routing Configuration is only set when there is a special routing configuration. If we don't use one of the inputs IN1 or IN2 as negative terminal input, the PGA and recording does not work. This patch adds a route from CM1L/CM1R to the PGA as negative input by default. With this configuration the PGA can amplify all input signals and line-in/mic works again. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-27ASoC: tlv320aic32x4: Fix mono playbackMarkus Pargmann2-7/+12
Playback of a mono stream should output the same stream on both channels. At the moment only the left analog signal is valid, the right one is just noise. This patch maps the left digital channel onto both DACs when receiving a mono stream. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-25ALSA: hda - Fix silent output on MacBook Air 1,1Adrien Vergé1-1/+18
Similarly to other Apple products, MBA 1,1 needs a specific quirk. Pin 0x18 must be set to VREF_50 to have sound output. This was no longer done since commit 1a97b7f, resulting in a mute built-in speaker. This patch corrects the regression by creating a fixup for the MBA 1,1. Fixes: 1a97b7f22774 ("ALSA: hda/realtek - Remove the last static quirks for ALC882") Cc: <stable@vger.kernel.org> [v3.4+] Tested-by: Adrien Vergé <adrienverge@gmail.com> Signed-off-by: Adrien Vergé <adrienverge@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-24ASoC: samsung: Remove dma.h inclusionSachin Kamat1-2/+0
mach/dma.h is not referenced by this file. Remove it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-24ASoC: samsung: Add NULL check in i2s.cSachin Kamat1-1/+2
'res' could be NULL from one of the operations above (line 1243). Thus check 'res' for NULL before releasing the region to avoid null pointer dereference. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-24ASoC: Samsung: Fix build error due to missing dependencySachin Kamat1-1/+1
Depend on MFD_ARIZONA to avoid the following build errors: sound/soc/codecs/arizona.c:218: undefined reference to `arizona_request_irq' sound/soc/codecs/arizona.c:226: undefined reference to `arizona_request_irq' sound/soc/codecs/arizona.c:1719: undefined reference to `arizona_request_irq' Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23ASoC: simple-card: fix simple card widgets routing property name usageXiubo Li1-1/+1
Fix the usage of simple card widgets routing property, and make it the same with simple card routing property name. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23ASoC: samsung: Fix Kconfig dependencySachin Kamat1-1/+1
Select S3C24XX_DMA instead of S3C2410_DMA to avoid following dependency issues and build errors: warning: (CPU_S3C2410 && CPU_S3C2442 && SND_SOC_SAMSUNG && SND_S3C24XX_I2S && SND_S3C2412_SOC_I2S && SND_SOC_SAMSUNG_SMDK2443_WM9710 && SND_SOC_SAMSUNG_LN2440SBC_ALC650) selects S3C2410_DMA which has unmet direct dependencies (ARCH_S3C24XX && S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)) warning: (CPU_S3C2410 && CPU_S3C2442 && SND_SOC_SAMSUNG && SND_S3C24XX_I2S && SND_S3C2412_SOC_I2S && SND_SOC_SAMSUNG_SMDK2443_WM9710 && SND_SOC_SAMSUNG_LN2440SBC_ALC650) selects S3C2410_DMA which has unmet direct dependencies (ARCH_S3C24XX && S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)) arch/arm/mach-s3c24xx/built-in.o: In function `s3c2410_dma_add': arch/arm/mach-s3c24xx/dma-s3c2410.c:134: undefined reference to `s3c2410_dma_init' arch/arm/mach-s3c24xx/dma-s3c2410.c:135: undefined reference to `s3c24xx_dma_order_set' arch/arm/mach-s3c24xx/dma-s3c2410.c:136: undefined reference to `s3c24xx_dma_init_map' arch/arm/plat-samsung/include/plat/dma-ops.h:60: undefined reference to `s3c_dma_get_ops' sound/soc/samsung/s3c24xx-i2s.c:293: undefined reference to `s3c2410_dma_ctrl' arch/arm/plat-samsung/include/plat/dma-ops.h:60: undefined reference to `s3c_dma_get_ops' arch/arm/plat-samsung/include/plat/dma-ops.h:60: undefined reference to `s3c_dma_get_ops' sound/built-in.o: In function `s3c2412_i2s_trigger': sound/soc/samsung/s3c-i2s-v2.c:432: undefined reference to `s3c2410_dma_ctrl' Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23ASoC: wm5100: Export wm5100_detectSachin Kamat1-0/+2
Export the symbol so that it is accessible to modules. Fixes the following error: ERROR: "wm5100_detect" [sound/soc/samsung/snd-soc-lowland.ko] undefined! Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23ALSA: Refactor slot assignment codeTakashi Iwai1-27/+30
There are two loops that are almost identical but only with different checks. Refactor them with a simple helper, and give a bit more comments what's doing there. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-23ALSA: bits vs bytes bug in snd_card_create()Dan Carpenter1-2/+2
The test here is intended intended to prevent shift wrapping bugs when we do "1U << idx2". We should consider the number of bits in a u32 instead of the number of bytes. [fix another chunk similarly by tiwai] Fixes: 7bb2491b35a2 ('ALSA: Add kconfig to specify the max card numbers') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-22ASoC: samsung: smdk_wm8994: Fix build errorSachin Kamat1-3/+1
Fixes the following build error and warning when OF is not defined: sound/soc/samsung/smdk_wm8994.c:191:23: error: ‘samsung_wm8994_of_match’ undeclared (first use in this function) sound/soc/samsung/smdk_wm8994.c:47:32: warning: ‘smdk_board_data’ defined but not used [-Wunused-variable] of_match_ptr() is used so that samsung_wm8994_of_match gets dropped (as unused) by the compiler when OF is not defined. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-22ASoC: Samsung: s3c-i2s-v2: Fix build errorSachin Kamat1-3/+3
Fixes the following error introduced by commit eca3b01d0885 ("ASoC: switch over to use snd_soc_register_component() on s3c i2s"): sound/soc/samsung/s3c-i2s-v2.c:732:32: error: ‘drv’ undeclared (first use in this function) Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-22ASoC: samsung: Fix build regressions due to gpio re-orgSachin Kamat6-0/+8
Recent changes through commits c67d0f29262b ("ARM: s3c24xx: get rid of custom <mach/gpio.h>"), b0161caa72b6 ("ARM: S3C[24|64]xx: move includes back under <mach/> scope"), 364374121b78 ("ARM: s3c24xx: explicit dependency on <plat/gpio-cfg.h>") and 41c3548e6da6 ("ARM: s3c64xx: get rid of custom <mach/gpio.h>") caused build regressions due to broken dependencies. Fix the following errors by including the necessary header files explicitly: sound/soc/samsung/h1940_uda1380.c:56:3: error: implicit declaration of function ‘S3C2410_GPG’ sound/soc/samsung/h1940_uda1380.c:149:18: error: ‘S3C_GPIO_END’ undeclared (first use in this function) sound/soc/samsung/h1940_uda1380.c:234:21: error: ‘S3C_GPIO_END’ undeclared (first use in this function) sound/soc/samsung/h1940_uda1380.c:270:12: error: ‘S3C_GPIO_END’ undeclared (first use in this function) sound/soc/samsung/neo1973_wm8753.c:239:2: error: implicit declaration of function ‘S3C2410_GPJ’ sound/soc/samsung/rx1950_uda1380.c:67:3: error: implicit declaration of function ‘S3C2410_GPG’ sound/soc/samsung/s3c2412-i2s.c:86:2: error: implicit declaration of function ‘s3c_gpio_cfgall_range’ sound/soc/samsung/s3c2412-i2s.c:86:2: error: implicit declaration of function ‘S3C2410_GPE’ sound/soc/samsung/s3c2412-i2s.c:86:2: error: implicit declaration of function ‘S3C_GPIO_SFN’ sound/soc/samsung/s3c2412-i2s.c:87:10: error: ‘S3C_GPIO_PULL_NONE’ undeclared sound/soc/samsung/s3c24xx-i2s.c:394:2: error: implicit declaration of function ‘s3c_gpio_cfgall_range’ sound/soc/samsung/s3c24xx-i2s.c:394:2: error: implicit declaration of function ‘S3C2410_GPE’ sound/soc/samsung/s3c24xx-i2s.c:394:2: error: implicit declaration of function ‘S3C_GPIO_SFN’ sound/soc/samsung/s3c24xx-i2s.c:395:10: error: ‘S3C_GPIO_PULL_NONE’ undeclared sound/soc/samsung/smartq_wm8987.c:112:3: error: implicit declaration of function ‘S3C64XX_GPL’ Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-22ALSA: hda - Apply +5dB output amp on ASUS Zenbook UX31ATakashi Iwai1-1/+13
ASUS Zenbook UX31A has yet another problem -- softer output level than others. According to the measurement, the peak output difference between 31A and 31E is 5dB. As ALC269VB has a COEF for the class-D pre-amp, let's apply it for +5dB. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-22ALSA: cs46xx: Fix memory leak at destructorTakashi Iwai1-0/+1
The release of module object itself was forgotten. Spotted by COVERIY CID 1162828. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-21ASoC: fsl_ssi: Do not print 'baud clock' error message all the timeFabio Estevam1-1/+1
Currently everytime we get the following message on boot: fsl-ssi-dai 202c000.ssi: could not get baud clock: -2 This is not really useful information to get on every boot, so make it a debug message instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-21ASoC: fsl_ssi: We do support master mode nowFabio Estevam1-6/+1
Since commit aafa85e71a (ASoC: fsl_ssi: Add DAI master mode support for SSI on i.MX series) master mode is supported, so update the comments and code to reflect that. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-21ASoC: wm5110: Extend SYSCLK patch file for rev DCharles Keepax1-0/+48
Latest evaluation of the the device has given some patch file additions for improved performance. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-01-21ASoC: omap: Make RX51 depend on GPIOLIB due to jack usageMark Brown1-0/+1
Since the GPIO jacks are only supported if gpiolib is built and fail to compile otherwise add a build depedency. This is unlikely to have any practical impact outside of coverage testing. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
2014-01-20Merge tag 'asoc-v3.14-3' of ↵Takashi Iwai6-26/+347
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Last updates for the merge window A couple more fixes plus some extensions to DPCM for use with compressed audio from Liam which arrived just after my previous pull request.
2014-01-20Merge remote-tracking branch 'asoc/topic/compress' into asoc-nextMark Brown4-18/+335
2014-01-20Merge remote-tracking branch 'asoc/topic/dma' into asoc-nextMark Brown1-3/+6
2014-01-20Merge remote-tracking branch 'asoc/topic/dapm' into asoc-nextMark Brown1-5/+6
2014-01-20Merge branch 'for-next' into for-linusTakashi Iwai282-10902/+11719
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-01 03:49:37 +0000