summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2020-04-02Merge branch 'remotes/lorenzo/pci/endpoint'Bjorn Helgaas17-308/+1655
- Use notification chain instead of EPF linkup ops for EPC events (Kishon Vijay Abraham I) - Protect concurrent allocation in endpoint outbound address region (Kishon Vijay Abraham I) - Protect concurrent access to pci_epf_ops (Kishon Vijay Abraham I) - Assign function number for each PF in endpoint core (Kishon Vijay Abraham I) - Refactor endpoint mode core initialization (Vidya Sagar) - Add API to notify when core initialization completes (Vidya Sagar) - Add test framework support to defer core initialization (Vidya Sagar) - Update Tegra SoC ABI header to support uninitialization of UPHY PLL when in endpoint mode without reference clock (Vidya Sagar) - Add DT and driver support for Tegra194 PCIe endpoint nodes (Vidya Sagar) - Add endpoint test support for DMA data transfer (Kishon Vijay Abraham I) - Print throughput information in endpoint test (Kishon Vijay Abraham I) - Use streaming DMA APIs for endpoint test buffer allocation (Kishon Vijay Abraham I) - Add endpoint test command line option for DMA (Kishon Vijay Abraham I) - When stopping a controller via configfs, clear endpoint "start" entry to prevent WARN_ON (Kunihiko Hayashi) - Update endpoint ->set_msix() to pay attention to MSI-X BAR Indicator and offset when finding MSI-X tables (Kishon Vijay Abraham I) - MSI-X tables are in local memory, not in the PCI address space. Update pcie-designware-ep to account for this (Kishon Vijay Abraham I) - Allow AM654 PCIe Endpoint to raise MSI-X interrupts (Kishon Vijay Abraham I) - Avoid using module parameter to determine irqtype for endpoint test (Kishon Vijay Abraham I) - Add ioctl to clear IRQ for endpoint test (Kishon Vijay Abraham I) - Add endpoint test 'e' option to clear IRQ (Kishon Vijay Abraham I) - Bump limit on number of endpoint test devices from 10 to 10,000 (Kishon Vijay Abraham I) - Use full pci-endpoint-test name in request_irq() for easier profiling (Kishon Vijay Abraham I) - Reduce log level of -EPROBE_DEFER error messages to debug (Thierry Reding) * remotes/lorenzo/pci/endpoint: misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS PCI: tegra: Print -EPROBE_DEFER error message at debug level misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq() misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices tools: PCI: Add 'e' to clear IRQ misc: pci_endpoint_test: Add ioctl to clear IRQ misc: pci_endpoint_test: Avoid using module parameter to determine irqtype PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments misc: pci_endpoint_test: Add support to get DMA option from userspace tools: PCI: Add 'd' command line option to support DMA misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation PCI: endpoint: functions/pci-epf-test: Print throughput information PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data PCI: endpoint: Fix clearing start entry in configfs PCI: tegra: Add support for PCIe endpoint mode in Tegra194 dt-bindings: PCI: tegra: Add DT support for PCIe EP nodes in Tegra194 soc/tegra: bpmp: Update ABI header PCI: pci-epf-test: Add support to defer core initialization PCI: dwc: Add API to notify core initialization completion PCI: endpoint: Add notification for core init completion PCI: dwc: Refactor core initialization code for EP mode PCI: endpoint: Add core init notifying feature PCI: endpoint: Assign function number for each PF in EPC core PCI: endpoint: Protect concurrent access to pci_epf_ops with mutex PCI: endpoint: Fix for concurrent memory allocation in OB address region PCI: endpoint: Replace spinlock with mutex PCI: endpoint: Use notification chain mechanism to notify EPC events to EPF
2020-04-02Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas1-36/+195
- Fix dra7xx issue with missing an MSI if new events pended during IRQ handler (Vignesh Raghavendra) * remotes/lorenzo/pci/dwc: PCI: dwc: pci-dra7xx: Fix MSI IRQ handling
2020-04-02Merge branch 'remotes/lorenzo/pci/dt'Bjorn Helgaas8-94/+225
- Add common schema for PCI endpoint controllers (Kishon Vijay Abraham I) - Add host and endpoint schemas for Cadence PCIe core (Kishon Vijay Abraham I) - Convert Cadence platform bindings to DT schema (Kishon Vijay Abraham I) * remotes/lorenzo/pci/dt: dt-bindings: PCI: Convert PCIe Host/Endpoint in Cadence platform to DT schema dt-bindings: PCI: cadence: Add PCIe RC/EP DT schema for Cadence PCIe dt-bindings: PCI: Add PCI Endpoint Controller Schema
2020-04-02Merge branch 'remotes/lorenzo/pci/amlogic'Bjorn Helgaas8-112/+527
- Add Amlogic AXG MIPI/PCIe PHY driver and related DT bindings (Remi Pommarel) - Use shared PHY driver for Amlogic AXG and G12A platforms (Remi Pommarel) * remotes/lorenzo/pci/amlogic: PCI: amlogic: Use AXG PCIE phy: amlogic: Add Amlogic AXG PCIE PHY Driver phy: amlogic: Add Amlogic AXG MIPI/PCIE analog PHY Driver dt-bindings: PCI: meson: Update PCIE bindings documentation dt-bindings: Add AXG shared MIPI/PCIE analog PHY bindings dt-bindings: Add AXG PCIE PHY bindings
2020-04-02Merge branch 'pci/virtualization'Bjorn Helgaas2-0/+31
- Add ACS quirks for Zhaoxin Root Ports, Downstream Ports, and multi-function devices (Raymond Pang) * pci/virtualization: PCI: Add ACS quirk for Zhaoxin Root/Downstream Ports PCI: Add ACS quirk for Zhaoxin multi-function devices PCI: Add Zhaoxin Vendor ID
2020-04-02Merge branch 'pci/resource'Bjorn Helgaas7-88/+95
- Use ioremap(), not phys_to_virt() for platform ROM, to fix video ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski) - Add support for root bus sizing so we don't have to assume host bridge windows are known a priori (Ivan Kokshaysky) - Fix alpha Nautilus PCI setup, which has been broken since we started enforcing window limits in resource allocation (Ivan Kokshaysky) * pci/resource: alpha: Fix nautilus PCI setup PCI: Add support for root bus sizing PCI: Use ioremap(), not phys_to_virt() for platform ROM
2020-04-02Merge branch 'pci/p2pdma'Bjorn Helgaas1-0/+3
- Add Intel Sky Lake-E Root Ports B, C, D to P2PDMA whitelist (Andrew Maier) * pci/p2pdma: PCI/P2PDMA: Add Intel Sky Lake-E Root Ports B, C, D to the whitelist
2020-04-02Merge branch 'pci/misc'Bjorn Helgaas3-3/+16
- Move _HPX type array from stack to static data (Colin Ian King) - Avoid an ASMedia XHCI USB PME# defect; apparently it doesn't assert PME# when USB3.0 devices are hotplugged in D0 (Kai-Heng Feng) - Revert sysfs "rescan" file renames that broke an application (Kelsey Skunberg) * pci/misc: PCI: sysfs: Revert "rescan" file renames PCI: Avoid ASMedia XHCI USB PME# from D0 defect PCI/ACPI: Move pcie_to_hpx3_type[] from stack to static data
2020-04-02Merge branch 'pci/interrupts'Bjorn Helgaas3-7/+229
- Extend boot interrupt quirk to cover several Xeon chipsets (Sean V Kelley) - Add documentation about boot interrupts (Sean V Kelley) * pci/interrupts: Documentation: PCI: Add background on Boot Interrupts PCI: Add boot interrupt quirk mechanism for Xeon chipsets
2020-04-02Merge branch 'pci/hotplug'Bjorn Helgaas3-15/+81
- Disable in-band presence detection when possible (Alexandru Gagniuc) - Poll for presence detect if in-band presence detection is disabled (Alexandru Gagniuc) - Add DMI table of systems that don't support in-band presence detection (Stuart Hayes) - Fix indefinite pciehp wait caused by race in handling sysfs requests (Lukas Wunner) - Fix pciehp MSI interrupt race that caused us to miss interrupts (Stuart Hayes) * pci/hotplug: PCI: pciehp: Fix MSI interrupt race PCI: pciehp: Fix indefinite wait on sysfs requests PCI: pciehp: Add DMI table for in-band presence detection disabled PCI: pciehp: Wait for PDS if in-band presence is disabled PCI: pciehp: Disable in-band presence detect when possible
2020-04-02Merge branch 'pci/enumeration'Bjorn Helgaas7-86/+67
- Add PCIe 32 GT/s speed decoding for sysfs "max_link_speed" and dmesg notes about available bandwidth (Yicong Yang) - Simplify and unify PCI bus/link speed reporting (Yicong Yang) * pci/enumeration: PCI: Add PCIE_LNKCAP2_SLS2SPEED() macro PCI: Use pci_speed_string() for all PCI/PCI-X/PCIe strings PCI: Add pci_speed_string() PCI: Add 32 GT/s decoding in some macros
2020-04-02Merge branch 'pci/edr'Bjorn Helgaas21-208/+409
- Update error status after reset_link() so we don't report "recovery failed" when it in fact succeeded (Kuppuswamy Sathyanarayanan) - Move DPC data into struct pci_dev instead of allocating a separate struct dpc_dev (Bjorn Helgaas) - Remove AER/DPC service dependency to simplify error recovery (Kuppuswamy Sathyanarayanan) - Return error recovery status for future use by EDR, which needs to tell firmware whether recovery was successful (Kuppuswamy Sathyanarayanan) - Cache DPC capability info in core since it's needed by EDR as well as DPC driver (Kuppuswamy Sathyanarayanan) - Add pci_aer_raw_clear_status() to allow EDR recovery path to clear AER status even when OS doesn't own the AER capability (Kuppuswamy Sathyanarayanan) - Add Error Disconnect Recover (EDR) support, so firmware can use ACPI notification to tell the OS that devices have been disconnected, e.g., via DPC, and that OS should attempt recovery (Kuppuswamy Sathyanarayanan) - Rename AER error status clearing interfaces to be more consistent (Kuppuswamy Sathyanarayanan) * pci/edr: PCI/AER: Rationalize error status register clearing PCI/DPC: Add Error Disconnect Recover (EDR) support PCI/DPC: Expose dpc_process_error(), dpc_reset_link() for use by EDR PCI/AER: Add pci_aer_raw_clear_status() to unconditionally clear Error Status PCI/DPC: Cache DPC capabilities in pci_init_capabilities() PCI/ERR: Return status of pcie_do_recovery() PCI/ERR: Remove service dependency in pcie_do_recovery() PCI/DPC: Move DPC data into struct pci_dev PCI/ERR: Update error status after reset_link() PCI/ERR: Combine pci_channel_io_frozen cases
2020-04-02Merge branch 'pci/aspm'Bjorn Helgaas1-3/+3
- Clear the correct bits when enabling ASPM L1 substates (Yicong Yang) - Reduce severity of ASPM common clock config message (Chris Packham) * pci/aspm: PCI/ASPM: Reduce severity of common clock config message PCI/ASPM: Clear the correct bits when enabling L1 substates
2020-04-02misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUSLad Prabhakar1-1/+0
PCI_ENDPOINT_TEST_STATUS is already defined in pci_endpoint_test.c along with the status bits, drop the duplicate definition. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-04-02PCI: tegra: Print -EPROBE_DEFER error message at debug levelThierry Reding1-7/+35
Probe deferral is an expected error condition that will usually be recovered from. Print such error messages at debug level to make them available for diagnostic purposes when building with debugging enabled and hide them otherwise to not spam the kernel log with them. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Vidya Sagar <vidyas@nvidia.com> Tested-by: Vidya Sagar <vidyas@nvidia.com>
2020-04-02misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq()Kishon Vijay Abraham I1-6/+19
Use full pci-endpoint-test name in request_irq(), so that it's easy to profile the device that actually raised the interrupt. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-04-02misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devicesKishon Vijay Abraham I1-1/+1
Adding more than 10 pci-endpoint-test devices results in "kobject_add_internal failed for pci-endpoint-test.1 with -EEXIST, don't try to register things with the same name in the same directory". This is because commit 2c156ac71c6b ("misc: Add host side PCI driver for PCI test function device") limited the length of the "name" to 20 characters. Change the length of the name to 24 in order to support upto 10000 pci-endpoint-test devices. Fixes: 2c156ac71c6b ("misc: Add host side PCI driver for PCI test function device") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # v4.14+
2020-04-02tools: PCI: Add 'e' to clear IRQKishon Vijay Abraham I1-1/+15
Add a new command line option 'e' to invoke "PCITEST_CLEAR_IRQ" ioctl. This can be used to clear the irqs set using the 'i' option. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-04-02misc: pci_endpoint_test: Add ioctl to clear IRQKishon Vijay Abraham I2-0/+11
Add ioctl to clear IRQ which can be used to free the allocated IRQ vectors and free the requested IRQ. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-04-02misc: pci_endpoint_test: Avoid using module parameter to determine irqtypeKishon Vijay Abraham I1-3/+9
commit e03327122e2c ("pci_endpoint_test: Add 2 ioctl commands") uses module parameter 'irqtype' in pci_endpoint_test_set_irq() to check if IRQ vectors of a particular type (MSI or MSI-X or LEGACY) is already allocated. However with multi-function devices, 'irqtype' will not correctly reflect the IRQ type of the PCI device. Fix it here by adding 'irqtype' for each PCI device to show the IRQ type of a particular PCI device. Fixes: e03327122e2c ("pci_endpoint_test: Add 2 ioctl commands") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # v4.19+
2020-04-02PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interruptKishon Vijay Abraham I1-1/+4
AM654 PCIe EP controller has MSI-X capability register and has the ability to raise MSI-X interrupt. Add support in pci-keystone.c for PCIe endpoint controller in AM654 to raise MSI-X interrupts. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-04-02PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table addressKishon Vijay Abraham I4-29/+35
commit beb4641a787d ("PCI: dwc: Add MSI-X callbacks handler"), in order to raise MSI-X interrupt, obtained MSIX table address from Base Address Register (BAR). However BAR only holds PCI address programmed by the host whereas the MSI-X table should be in the local memory. Store the MSI-X table address (virtual address) as part of ->set_bar() callback and use that to get the message address and message data here. Fixes: beb4641a787d ("PCI: dwc: Add MSI-X callbacks handler") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-04-02PCI: endpoint: Fix ->set_msix() to take BIR and offset as argumentsKishon Vijay Abraham I4-12/+48
commit 8963106eabdc ("PCI: endpoint: Add MSI-X interfaces") while adding support to raise MSI-X interrupts from endpoint didn't include BAR Indicator register (BIR) configuration and MSI-X table offset as arguments in pci_epc_set_msix(). This would result in endpoint controller register using random BAR indicator register, the memory for which might not be allocated by the endpoint function driver. Add BAR indicator register and MSI-X table offset as arguments in pci_epc_set_msix() and allocate space for MSI-X table and pending bit array (PBA) in pci-epf-test endpoint function driver. Fixes: 8963106eabdc ("PCI: endpoint: Add MSI-X interfaces") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-04-02misc: pci_endpoint_test: Add support to get DMA option from userspaceKishon Vijay Abraham I1-3/+62
'pcitest' utility now uses '-d' option to allow the user to test DMA. Add support to parse option to use DMA from userspace application. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Alan Mikhak <alan.mikhak@sifive.com>
2020-04-02tools: PCI: Add 'd' command line option to support DMAKishon Vijay Abraham I2-4/+26
Add a new command line option 'd' to use DMA for data transfers. It should be used with read, write or copy commands. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Alan Mikhak <alan.mikhak@sifive.com>
2020-04-02misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocationKishon Vijay Abraham I1-21/+79
Use streaming DMA APIs (dma_map_single/dma_unmap_single) for buffers transmitted/received by the endpoint device instead of allocating a coherent memory. Also add default_data to set the alignment to 4KB since dma_map_single might not return a 4KB aligned address. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Alan Mikhak <alan.mikhak@sifive.com>
2020-04-02PCI: endpoint: functions/pci-epf-test: Print throughput informationKishon Vijay Abraham I1-0/+48
Print throughput information in KB/s after every completed transfer, including information on whether DMA is used or not. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Alan Mikhak <alan.mikhak@sifive.com>
2020-04-02PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer dataKishon Vijay Abraham I1-3/+202
Use dmaengine API and add support for transferring data using DMA. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Alan Mikhak <alan.mikhak@sifive.com>
2020-03-31PCI: pciehp: Fix MSI interrupt raceStuart Hayes1-6/+20
Without this commit, a PCIe hotplug port can stop generating interrupts on hotplug events, so device adds and removals will not be seen: The pciehp interrupt handler pciehp_isr() reads the Slot Status register and then writes back to it to clear the bits that caused the interrupt. If a different interrupt event bit gets set between the read and the write, pciehp_isr() returns without having cleared all of the interrupt event bits. If this happens when the MSI isn't masked (which by default it isn't in handle_edge_irq(), and which it will never be when MSI per-vector masking is not supported), we won't get any more hotplug interrupts from that device. That is expected behavior, according to the PCIe Base Spec r5.0, section 6.7.3.4, "Software Notification of Hot-Plug Events". Because the Presence Detect Changed and Data Link Layer State Changed event bits can both get set at nearly the same time when a device is added or removed, this is more likely to happen than it might seem. The issue was found (and can be reproduced rather easily) by connecting and disconnecting an NVMe storage device on at least one system model where the NVMe devices were being connected to an AMD PCIe port (PCI device 0x1022/0x1483). Fix the issue by modifying pciehp_isr() to loop back and re-read the Slot Status register immediately after writing to it, until it sees that all of the event status bits have been cleared. [lukas: drop loop count limitation, write "events" instead of "status", don't loop back in INTx and poll modes, tweak code comment & commit msg] Link: https://lore.kernel.org/r/78b4ced5072bfe6e369d20e8b47c279b8c7af12e.1582121613.git.lukas@wunner.de Tested-by: Stuart Hayes <stuart.w.hayes@gmail.com> Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Joerg Roedel <jroedel@suse.de>
2020-03-31PCI: pciehp: Fix indefinite wait on sysfs requestsLukas Wunner1-7/+7
David Hoyer reports that powering pciehp slots up or down via sysfs may hang: The call to wait_event() in pciehp_sysfs_enable_slot() and _disable_slot() does not return because ctrl->ist_running remains true. This flag, which was introduced by commit 157c1062fcd8 ("PCI: pciehp: Avoid returning prematurely from sysfs requests"), signifies that the IRQ thread pciehp_ist() is running. It is set to true at the top of pciehp_ist() and reset to false at the end. However there are two additional return statements in pciehp_ist() before which the commit neglected to reset the flag to false and wake up waiters for the flag. That omission opens up the following race when powering up the slot: * pciehp_ist() runs because a PCI_EXP_SLTSTA_PDC event was requested by pciehp_sysfs_enable_slot() * pciehp_ist() turns on slot power via the following call stack: pciehp_handle_presence_or_link_change() -> pciehp_enable_slot() -> __pciehp_enable_slot() -> board_added() -> pciehp_power_on_slot() * after slot power is turned on, the link comes up, resulting in a PCI_EXP_SLTSTA_DLLSC event * the IRQ handler pciehp_isr() stores the event in ctrl->pending_events and returns IRQ_WAKE_THREAD * the IRQ thread is already woken (it's bringing up the slot), but the genirq code remembers to re-run the IRQ thread after it has finished (such that it can deal with the new event) by setting IRQTF_RUNTHREAD via __handle_irq_event_percpu() -> __irq_wake_thread() * the IRQ thread removes PCI_EXP_SLTSTA_DLLSC from ctrl->pending_events via board_added() -> pciehp_check_link_status() in order to deal with presence and link flaps per commit 6c35a1ac3da6 ("PCI: pciehp: Tolerate initially unstable link") * after pciehp_ist() has successfully brought up the slot, it resets ctrl->ist_running to false and wakes up the sysfs requester * the genirq code re-runs pciehp_ist(), which sets ctrl->ist_running to true but then returns with IRQ_NONE because ctrl->pending_events is empty * pciehp_sysfs_enable_slot() is finally woken but notices that ctrl->ist_running is true, hence continues waiting The only way to get the hung task going again is to trigger a hotplug event which brings down the slot, e.g. by yanking out the card. The same race exists when powering down the slot because remove_board() likewise clears link or presence changes in ctrl->pending_events per commit 3943af9d01e9 ("PCI: pciehp: Ignore Link State Changes after powering off a slot") and thereby may cause a re-run of pciehp_ist() which returns with IRQ_NONE without resetting ctrl->ist_running to false. Fix by adding a goto label before the teardown steps at the end of pciehp_ist() and jumping to that label from the two return statements which currently neglect to reset the ctrl->ist_running flag. Fixes: 157c1062fcd8 ("PCI: pciehp: Avoid returning prematurely from sysfs requests") Link: https://lore.kernel.org/r/cca1effa488065cb055120aa01b65719094bdcb5.1584530321.git.lukas@wunner.de Reported-by: David Hoyer <David.Hoyer@netapp.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Cc: stable@vger.kernel.org # v4.19+
2020-03-31PCI: endpoint: Fix clearing start entry in configfsKunihiko Hayashi1-0/+1
After an endpoint is started through configfs, if 0 is written to the configfs entry 'start', the controller stops but the epc_group->start value remains 1. A subsequent unlinking of the function from the controller would trigger a spurious WARN_ON_ONCE() in pci_epc_epf_unlink() despite right behavior. Fix it by setting epc_group->start = 0 when a controller is stopped using configfs. Fixes: d74679911610 ("PCI: endpoint: Introduce configfs entry for configuring EP functions") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Cc: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-31PCI: tegra: Add support for PCIe endpoint mode in Tegra194Vidya Sagar3-18/+695
Add support for the endpoint mode of Synopsys DesignWare core based dual mode PCIe controllers present in Tegra194 SoC. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
2020-03-30PCI: sysfs: Revert "rescan" file renamesKelsey Skunberg1-2/+4
We changed these sysfs filenames: .../pci_bus/<domain:bus>/rescan -> .../pci_bus/<domain:bus>/bus_rescan .../<domain:bus:dev.fn>/rescan -> .../<domain:bus:dev.fn>/dev_rescan and Ruslan reported [1] that this broke a userspace application. Revert these name changes so both files are named "rescan" again. Note that we have to use __ATTR() to assign custom C symbols, i.e., "struct device_attribute <symbol>". [1] https://lore.kernel.org/r/CAB=otbSYozS-ZfxB0nCiNnxcbqxwrHOSYxJJtDKa63KzXbXgpw@mail.gmail.com [bhelgaas: commit log, use __ATTR() both places so we don't have to rename the attributes] Fixes: 8bdfa145f582 ("PCI: sysfs: Define device attributes with DEVICE_ATTR*()") Fixes: 4e2b79436e4f ("PCI: sysfs: Change DEVICE_ATTR() to DEVICE_ATTR_WO()") Link: https://lore.kernel.org/r/20200325151708.32612-1-skunberg.kelsey@gmail.com Signed-off-by: Kelsey Skunberg <kelsey.skunberg@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org # v5.4+
2020-03-30alpha: Fix nautilus PCI setupIvan Kokshaysky1-32/+20
Example (hopefully reasonable) of the new "size_windows" flag usage. Fixes accidental breakage caused by f75b99d5a77d ("PCI: Enforce bus address limits in resource allocation"). Fixes: f75b99d5a77d ("PCI: Enforce bus address limits in resource allocation") Link: https://lore.kernel.org/r/20200318005029.GA8326@mail.rc.ru Tested-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-30PCI: Add support for root bus sizingIvan Kokshaysky2-12/+23
In certain cases we should be able to enumerate IO and MEM ranges of all PCI devices installed in the system, and then set respective host bridge apertures basing on calculated size and alignment. Particularly when firmware is broken and fails to assign bridge windows properly, like on Alpha UP1500 platform. Actually, almost everything is already in place, and required changes are minimal: - add "size_windows" flag to struct pci_host_bridge: when set, it instructs __pci_bus_size_bridges() to continue with the root bus; - in the __pci_bus_size_bridges() path: add checks for bus->self, as it can legitimately be null for the root bus. Link: https://lore.kernel.org/r/20200314194355.GA12510@mail.rc.ru Tested-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-30PCI: Use ioremap(), not phys_to_virt() for platform ROMMikel Rychliski5-44/+52
On some EFI systems, the video BIOS is provided by the EFI firmware. The boot stub code stores the physical address of the ROM image in pdev->rom. Currently we attempt to access this pointer using phys_to_virt(), which doesn't work with CONFIG_HIGHMEM. On these systems, attempting to load the radeon module on a x86_32 kernel can result in the following: BUG: unable to handle page fault for address: 3e8ed03c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP CPU: 0 PID: 317 Comm: systemd-udevd Not tainted 5.6.0-rc3-next-20200228 #2 Hardware name: Apple Computer, Inc. MacPro1,1/Mac-F4208DC8, BIOS MP11.88Z.005C.B08.0707021221 07/02/07 EIP: radeon_get_bios+0x5ed/0xe50 [radeon] Code: 00 00 84 c0 0f 85 12 fd ff ff c7 87 64 01 00 00 00 00 00 00 8b 47 08 8b 55 b0 e8 1e 83 e1 d6 85 c0 74 1a 8b 55 c0 85 d2 74 13 <80> 38 55 75 0e 80 78 01 aa 0f 84 a4 03 00 00 8d 74 26 00 68 dc 06 EAX: 3e8ed03c EBX: 00000000 ECX: 3e8ed03c EDX: 00010000 ESI: 00040000 EDI: eec04000 EBP: eef3fc60 ESP: eef3fbe0 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010206 CR0: 80050033 CR2: 3e8ed03c CR3: 2ec77000 CR4: 000006d0 Call Trace: r520_init+0x26/0x240 [radeon] radeon_device_init+0x533/0xa50 [radeon] radeon_driver_load_kms+0x80/0x220 [radeon] drm_dev_register+0xa7/0x180 [drm] radeon_pci_probe+0x10f/0x1a0 [radeon] pci_device_probe+0xd4/0x140 Fix the issue by updating all drivers which can access a platform provided ROM. Instead of calling the helper function pci_platform_rom() which uses phys_to_virt(), call ioremap() directly on the pdev->rom. radeon_read_platform_bios() previously directly accessed an __iomem pointer. Avoid this by calling memcpy_fromio() instead of kmemdup(). pci_platform_rom() now has no remaining callers, so remove it. Link: https://lore.kernel.org/r/20200319021623.5426-1-mikel@mikelr.com Signed-off-by: Mikel Rychliski <mikel@mikelr.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-28PCI: Add ACS quirk for Zhaoxin Root/Downstream PortsRaymond Pang1-0/+25
Many Zhaoxin Root Ports and Switch Downstream Ports do provide ACS-like capability but have no ACS Capability Structure. Peer-to-Peer transactions could be blocked between these ports, so add quirk so devices behind them could be assigned to different IOMMU group. Link: https://lore.kernel.org/r/20200327091148.5190-4-RaymondPang-oc@zhaoxin.com Signed-off-by: Raymond Pang <RaymondPang-oc@zhaoxin.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI: Add ACS quirk for Zhaoxin multi-function devicesRaymond Pang1-0/+4
Some Zhaoxin endpoints are implemented as multi-function devices without an ACS capability, but they actually don't support peer-to-peer transactions. Add ACS quirks to declare DMA isolation. Link: https://lore.kernel.org/r/20200327091148.5190-3-RaymondPang-oc@zhaoxin.com Signed-off-by: Raymond Pang <RaymondPang-oc@zhaoxin.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI: Add Zhaoxin Vendor IDRaymond Pang1-0/+2
Add Zhaoxin Vendor ID to pci_ids.h Link: https://lore.kernel.org/r/20200327091148.5190-2-RaymondPang-oc@zhaoxin.com Signed-off-by: Raymond Pang <RaymondPang-oc@zhaoxin.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/ASPM: Reduce severity of common clock config messageChris Packham1-1/+1
When the UEFI/BIOS or bootloader has not initialised a PCIe device we would get the following message: kern.warning: pci 0000:00:01.0: ASPM: current common clock configuration is broken, reconfiguring "warning" and "broken" are slightly misleading. On an embedded system it is quite possible for the bootloader to avoid configuring PCIe devices if they are not needed. Downgrade the message to pci_info() and change "broken" to "inconsistent" since we fix up the inconsistency in the code immediately following the message (and emit an error if that fails). Link: https://lore.kernel.org/r/20200323035530.11569-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/AER: Rationalize error status register clearingKuppuswamy Sathyanarayanan10-22/+19
The AER interfaces to clear error status registers were a confusing mess: - pci_cleanup_aer_uncorrect_error_status() cleared non-fatal errors from the Uncorrectable Error Status register. - pci_aer_clear_fatal_status() cleared fatal errors from the Uncorrectable Error Status register. - pci_cleanup_aer_error_status_regs() cleared the Root Error Status register (for Root Ports), the Uncorrectable Error Status register, and the Correctable Error Status register. Rename them to make them consistent: From To ---------------------------------------- ------------------------------- pci_cleanup_aer_uncorrect_error_status() pci_aer_clear_nonfatal_status() pci_aer_clear_fatal_status() pci_aer_clear_fatal_status() pci_cleanup_aer_error_status_regs() pci_aer_clear_status() Since pci_cleanup_aer_error_status_regs() (renamed to pci_aer_clear_status()) is only used within drivers/pci/, move the declaration from <linux/aer.h> to drivers/pci/pci.h. [bhelgaas: commit log, add renames] Link: https://lore.kernel.org/r/d1310a75dc3d28f7e8da4e99c45fbd3e60fe238e.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/DPC: Add Error Disconnect Recover (EDR) supportKuppuswamy Sathyanarayanan9-2/+281
Error Disconnect Recover (EDR) is a feature that allows ACPI firmware to notify OSPM that a device has been disconnected due to an error condition (ACPI v6.3, sec 5.6.6). OSPM advertises its support for EDR on PCI devices via _OSC (see [1], sec 4.5.1, table 4-4). The OSPM EDR notify handler should invalidate software state associated with disconnected devices and may attempt to recover them. OSPM communicates the status of recovery to the firmware via _OST (sec 6.3.5.2). For PCIe, firmware may use Downstream Port Containment (DPC) to support EDR. Per [1], sec 4.5.1, table 4-6, even if firmware has retained control of DPC, OSPM may read/write DPC control and status registers during the EDR notification processing window, i.e., from the time it receives an EDR notification until it clears the DPC Trigger Status. Note that per [1], sec 4.5.1 and 4.5.2.4, 1. If the OS supports EDR, it should advertise that to firmware by setting OSC_PCI_EDR_SUPPORT in _OSC Support. 2. If the OS sets OSC_PCI_EXPRESS_DPC_CONTROL in _OSC Control to request control of the DPC capability, it must also set OSC_PCI_EDR_SUPPORT in _OSC Support. Add an EDR notify handler to attempt recovery. [1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/12888 [bhelgaas: squash add/enable patches into one] Link: https://lore.kernel.org/r/90f91fe6d25c13f9d2255d2ce97ca15be307e1bb.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org>
2020-03-28PCI/DPC: Expose dpc_process_error(), dpc_reset_link() for use by EDRKuppuswamy Sathyanarayanan2-3/+11
If firmware controls DPC, it is generally responsible for managing the DPC capability and events, and the OS should not access the DPC capability. However, if firmware controls DPC and both the OS and the platform support Error Disconnect Recover (EDR) notifications, the OS EDR notify handler is responsible for recovery, and the notify handler may read/write the DPC capability until it clears the DPC Trigger Status bit. See [1], sec 4.5.1, table 4-6. Expose some DPC error handling functions so they can be used by the EDR notify handler. [1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/12888 Link: https://lore.kernel.org/r/e9000bb15b3a4293e81d98bb29ead7c84a6393c9.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/AER: Add pci_aer_raw_clear_status() to unconditionally clear Error StatusKuppuswamy Sathyanarayanan2-4/+20
Per the SFI _OSC and DPC Updates ECN [1] implementation note flowchart, the OS seems to be expected to clear AER status even if it doesn't have ownership of the AER capability. Unlike the DPC capability, where a DPC ECN [2] specifies a window when the OS is allowed to access DPC registers even if it doesn't have ownership, there is no clear model for AER. Add pci_aer_raw_clear_status() to clear the AER error status registers unconditionally. This is intended for use only by the EDR path (see [2]). [1] System Firmware Intermediary (SFI) _OSC and DPC Updates ECN, Feb 24, 2020, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/14076 [2] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/12888 [bhelgaas: changelog] Link: https://lore.kernel.org/r/c19ad28f3633cce67448609e89a75635da0da07d.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/DPC: Cache DPC capabilities in pci_init_capabilities()Kuppuswamy Sathyanarayanan3-12/+24
Since Error Disconnect Recover needs to use DPC error handling routines even if the OS doesn't have control of DPC, move the initalization and caching of DPC capabilities from the DPC driver to pci_init_capabilities(). Link: https://lore.kernel.org/r/5888380657c8b9551675b5dbd48e370e4fd2703d.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/ERR: Return status of pcie_do_recovery()Kuppuswamy Sathyanarayanan2-6/+9
As per the DPC Enhancements ECN [1], sec 4.5.1, table 4-4, if the OS supports Error Disconnect Recover (EDR), it must invalidate the software state associated with child devices of the port without attempting to access the child device hardware. In addition, if the OS supports DPC, it must attempt to recover the child devices if the port implements the DPC Capability. If the OS continues operation, the OS must inform the firmware of the status of the recovery operation via the _OST method. Return the result of pcie_do_recovery() so we can report it to firmware via _OST. [1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/12888 Link: https://lore.kernel.org/r/eb60ec89448769349c6722954ffbf2de163155b5.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/ERR: Remove service dependency in pcie_do_recovery()Kuppuswamy Sathyanarayanan7-96/+18
Previously we passed the PCIe service type parameter to pcie_do_recovery(), where reset_link() looked up the underlying pci_port_service_driver and its .reset_link() function pointer. Instead of using this roundabout way, we can just pass the driver-specific .reset_link() callback function when calling pcie_do_recovery() function. This allows us to call pcie_do_recovery() from code that is not a PCIe port service driver, e.g., Error Disconnect Recover (EDR) support. Remove pcie_port_find_service() and pcie_port_service_driver.reset_link since they are now unused. Link: https://lore.kernel.org/r/60e02b87b526cdf2930400059d98704bf0a147d1.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/DPC: Move DPC data into struct pci_devBjorn Helgaas2-72/+36
We only need 25 bits of data for DPC, so I don't think it's worth the complexity of allocating and keeping track of the struct dpc_dev separately from the pci_dev. Move that data into the struct pci_dev. Link: https://lore.kernel.org/r/98323eaa18080adbe5bb30846862f09f8722d4b3.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/ERR: Update error status after reset_link()Kuppuswamy Sathyanarayanan1-1/+2
Commit bdb5ac85777d ("PCI/ERR: Handle fatal error recovery") uses reset_link() to recover from fatal errors. But during fatal error recovery, if the initial value of error status is PCI_ERS_RESULT_DISCONNECT or PCI_ERS_RESULT_NO_AER_DRIVER then even after successful recovery (using reset_link()) pcie_do_recovery() will report the recovery result as failure. Update the status of error after reset_link(). You can reproduce this issue by triggering a SW DPC using "DPC Software Trigger" bit in "DPC Control Register". You should see recovery failed dmesg log as below: pcieport 0000:00:16.0: DPC: containment event, status:0x1f27 source:0x0000 pcieport 0000:00:16.0: DPC: software trigger detected pci 0000:04:00.0: AER: can't recover (no error_detected callback) pcieport 0000:00:16.0: AER: device recovery failed Fixes: bdb5ac85777d ("PCI/ERR: Handle fatal error recovery") Link: https://lore.kernel.org/r/a255fcb3a3fdebcd90f84e08b555f1786eb8eba2.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com [bhelgaas: split pci_channel_io_frozen simplification to separate patch] Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com> Cc: Ashok Raj <ashok.raj@intel.com>
2020-03-28PCI/ERR: Combine pci_channel_io_frozen casesKuppuswamy Sathyanarayanan1-6/+5
pcie_do_recovery() had two "if (state == pci_channel_io_frozen)" cases right after each other. Combine them to make this easier to read. No functional change intended. Link: https://lore.kernel.org/r/20200317170654.GA23125@infradead.org [bhelgaas: split from https://lore.kernel.org/r/a255fcb3a3fdebcd90f84e08b555f1786eb8eba2.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com] Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 22:36:47 +0000