summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2015-04-10KVM: use slowpath for cross page cached accessesRadim Krčmář1-2/+2
kvm_write_guest_cached() does not mark all written pages as dirty and code comments in kvm_gfn_to_hva_cache_init() talk about NULL memslot with cross page accesses. Fix all the easy way. The check is '<= 1' to have the same result for 'len = 0' cache anywhere in the page. (nr_pages_needed is 0 on page boundary.) Fixes: 8f964525a121 ("KVM: Allow cross page reads and writes from cached translations.") Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Message-Id: <20150408121648.GA3519@potion.brq.redhat.com> Reviewed-by: Wanpeng Li <wanpeng.li@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08kvm: mmu: lazy collapse small sptes into large sptesWanpeng Li3-0/+92
Dirty logging tracks sptes in 4k granularity, meaning that large sptes have to be split. If live migration is successful, the guest in the source machine will be destroyed and large sptes will be created in the destination. However, the guest continues to run in the source machine (for example if live migration fails), small sptes will remain around and cause bad performance. This patch introduce lazy collapsing of small sptes into large sptes. The rmap will be scanned in ioctl context when dirty logging is stopped, dropping those sptes which can be collapsed into a single large-page spte. Later page faults will create the large-page sptes. Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com> Message-Id: <1428046825-6905-1-git-send-email-wanpeng.li@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: x86: Clear CR2 on VCPU resetNadav Amit1-0/+2
CR2 is not cleared as it should after reset. See Intel SDM table named "IA-32 Processor States Following Power-up, Reset, or INIT". Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Message-Id: <1427933438-12782-5-git-send-email-namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: x86: DR0-DR3 are not clear on resetNadav Amit2-0/+15
DR0-DR3 are not cleared as they should during reset and when they are set from userspace. It appears to be caused by c77fb5fe6f03 ("KVM: x86: Allow the guest to run with dirty debug registers"). Force their reload on these situations. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Message-Id: <1427933438-12782-4-git-send-email-namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: x86: BSP in MSR_IA32_APICBASE is writableNadav Amit5-6/+9
After reset, the CPU can change the BSP, which will be used upon INIT. Reset should return the BSP which QEMU asked for, and therefore handled accordingly. To quote: "If the MP protocol has completed and a BSP is chosen, subsequent INITs (either to a specific processor or system wide) do not cause the MP protocol to be repeated." [Intel SDM 8.4.2: MP Initialization Protocol Requirements and Restrictions] Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Message-Id: <1427933438-12782-3-git-send-email-namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: x86: simplify kvm_apic_mapRadim Krčmář3-68/+28
recalculate_apic_map() uses two passes over all VCPUs. This is a relic from time when we selected a global mode in the first pass and set up the optimized table in the second pass (to have a consistent mode). Recent changes made mixed mode unoptimized and we can do it in one pass. Format of logical MDA is a function of the mode, so we encode it in apic_logical_id() and drop obsoleted variables from the struct. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Message-Id: <1423766494-26150-5-git-send-email-rkrcmar@redhat.com> [Add lid_bits temporary in apic_logical_id. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: x86: avoid logical_map when it is invalidRadim Krčmář2-1/+35
We want to support mixed modes and the easiest solution is to avoid optimizing those weird and unlikely scenarios. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Message-Id: <1423766494-26150-4-git-send-email-rkrcmar@redhat.com> [Add comment above KVM_APIC_MODE_* defines. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: x86: fix mixed APIC mode broadcastRadim Krčmář2-6/+5
Broadcast allowed only one global APIC mode, but mixed modes are theoretically possible. x2APIC IPI doesn't mean 0xff as broadcast, the rest does. x2APIC broadcasts are accepted by xAPIC. If we take SDM to be logical, even addreses beginning with 0xff should be accepted, but real hardware disagrees. This patch aims for simple code by considering most of real behavior as undefined. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Message-Id: <1423766494-26150-3-git-send-email-rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: x86: use MDA for interrupt matchingRadim Krčmář1-7/+33
In mixed modes, we musn't deliver xAPIC IPIs like x2APIC and vice versa. Instead of preserving the information in apic_send_ipi(), we regain it by converting all destinations into correct MDA in the slow path. This allows easier reasoning about subsequent matching. Our kvm_apic_broadcast() had an interesting design decision: it didn't consider IOxAPIC 0xff as broadcast in x2APIC mode ... everything worked because IOxAPIC can't set that in physical mode and logical mode considered it as a message for first 8 VCPUs. This patch interprets IOxAPIC 0xff as x2APIC broadcast. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Message-Id: <1423766494-26150-2-git-send-email-rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08kvm/ppc/mpic: drop unused IRQ_testbitArseny Solokha1-5/+0
Drop unused static procedure which doesn't have callers within its translation unit. It had been already removed independently in QEMU[1] from the OpenPIC implementation borrowed from the kernel. [1] https://lists.gnu.org/archive/html/qemu-devel/2014-06/msg01812.html Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Cc: Alexander Graf <agraf@suse.de> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1424768706-23150-3-git-send-email-asolokha@kb.kras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: nVMX: remove unnecessary double caching of MAXPHYADDREugene Korenevsky1-8/+6
After speed-up of cpuid_maxphyaddr() it can be called frequently: instead of heavyweight enumeration of CPUID entries it returns a cached pre-computed value. It is also inlined now. So caching its result became unnecessary and can be removed. Signed-off-by: Eugene Korenevsky <ekorenevsky@gmail.com> Message-Id: <20150329205644.GA1258@gnote> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: nVMX: checks for address bits beyond MAXPHYADDR on VM-entryEugene Korenevsky1-6/+7
On each VM-entry CPU should check the following VMCS fields for zero bits beyond physical address width: - APIC-access address - virtual-APIC address - posted-interrupt descriptor address This patch adds these checks required by Intel SDM. Signed-off-by: Eugene Korenevsky <ekorenevsky@gmail.com> Message-Id: <20150329205627.GA1244@gnote> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: x86: cache maxphyaddr CPUID leaf in struct kvm_vcpuEugene Korenevsky4-16/+29
cpuid_maxphyaddr(), which performs lot of memory accesses is called extensively across KVM, especially in nVMX code. This patch adds a cached value of maxphyaddr to vcpu.arch to reduce the pressure onto CPU cache and simplify the code of cpuid_maxphyaddr() callers. The cached value is initialized in kvm_arch_vcpu_init() and reloaded every time CPUID is updated by usermode. It is obvious that these reloads occur infrequently. Signed-off-by: Eugene Korenevsky <ekorenevsky@gmail.com> Message-Id: <20150329205612.GA1223@gnote> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: vmx: pass error code with internal error #2Radim Krčmář1-1/+2
Exposing the on-stack error code with internal error is cheap and potentially useful. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Message-Id: <1428001865-32280-1-git-send-email-rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08x86: vdso: fix pvclock races with task migrationRadim Krčmář1-8/+12
If we were migrated right after __getcpu, but before reading the migration_count, we wouldn't notice that we read TSC of a different VCPU, nor that KVM's bug made pvti invalid, as only migration_count on source VCPU is increased. Change vdso instead of updating migration_count on destination. Cc: stable@vger.kernel.org Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Fixes: 0a4e6be9ca17 ("x86: kvm: Revert "remove sched notifier for cross-cpu migrations"") Message-Id: <1428000263-11892-1-git-send-email-rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: remove kvm_read_hva and kvm_read_hva_atomicPaolo Bonzini1-12/+2
The corresponding write functions just use __copy_to_user. Do the same on the read side. This reverts what's left of commit 86ab8cffb498 (KVM: introduce gfn_to_hva_read/kvm_read_hva/kvm_read_hva_atomic, 2012-08-21) Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1427976500-28533-1-git-send-email-pbonzini@redhat.com>
2015-04-08KVM: x86: optimize delivery of TSC deadline timer interruptPaolo Bonzini1-6/+7
The newly-added tracepoint shows the following results on the tscdeadline_latency test: qemu-kvm-8387 [002] 6425.558974: kvm_vcpu_wakeup: poll time 10407 ns qemu-kvm-8387 [002] 6425.558984: kvm_vcpu_wakeup: poll time 0 ns qemu-kvm-8387 [002] 6425.561242: kvm_vcpu_wakeup: poll time 10477 ns qemu-kvm-8387 [002] 6425.561251: kvm_vcpu_wakeup: poll time 0 ns and so on. This is because we need to go through kvm_vcpu_block again after the timer IRQ is injected. Avoid it by polling once before entering kvm_vcpu_block. On my machine (Xeon E5 Sandy Bridge) this removes about 500 cycles (7%) from the latency of the TSC deadline timer. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08KVM: x86: extract blocking logic from __vcpu_runPaolo Bonzini1-28/+34
Rename the old __vcpu_run to vcpu_run, and extract part of it to a new function vcpu_block. The next patch will add a new condition in vcpu_block, avoid extra indentation. Reviewed-by: David Matlack <dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-08kvm: x86: fix x86 eflags fixed bitWanpeng Li1-3/+3
Guest can't be booted w/ ept=0, there is a message dumped as below: If you're running a guest on an Intel machine without unrestricted mode support, the failure can be most likely due to the guest entering an invalid state for Intel VT. For example, the guest maybe running in big real mode which is not supported on less recent Intel processors. EAX=00000011 EBX=f000d2f6 ECX=00006cac EDX=000f8956 ESI=bffbdf62 EDI=00000000 EBP=00006c68 ESP=00006c68 EIP=0000d187 EFL=00000004 [-----P-] CPL=0 II=0 A20=1 SMM=0 HLT=0 ES =e000 000e0000 ffffffff 00809300 DPL=0 DS16 [-WA] CS =f000 000f0000 ffffffff 00809b00 DPL=0 CS16 [-RA] SS =0000 00000000 ffffffff 00809300 DPL=0 DS16 [-WA] DS =0000 00000000 ffffffff 00809300 DPL=0 DS16 [-WA] FS =0000 00000000 ffffffff 00809300 DPL=0 DS16 [-WA] GS =0000 00000000 ffffffff 00809300 DPL=0 DS16 [-WA] LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy GDT= 000f6a80 00000037 IDT= 000f6abe 00000000 CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000 DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000 DR6=00000000ffff0ff0 DR7=0000000000000400 EFER=0000000000000000 Code=01 1e b8 6a 2e 0f 01 16 74 6a 0f 20 c0 66 83 c8 01 0f 22 c0 <66> ea 8f d1 0f 00 08 00 b8 10 00 00 00 8e d8 8e c0 8e d0 8e e0 8e e8 89 c8 ff e2 89 c1 b8X X86 eflags bit 1 is fixed set, which means that 1 << 1 is set instead of 1, this patch fix it. Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com> Message-Id: <1428473294-6633-1-git-send-email-wanpeng.li@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-07Merge tag 'kvm-s390-next-20150331' of ↵Paolo Bonzini9-402/+906
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD Features and fixes for 4.1 (kvm/next) 1. Assorted changes 1.1 allow more feature bits for the guest 1.2 Store breaking event address on program interrupts 2. Interrupt handling rework 2.1 Fix copy_to_user while holding a spinlock (cc stable) 2.2 Rework floating interrupts to follow the priorities 2.3 Allow to inject all local interrupts via new ioctl 2.4 allow to get/set the full local irq state, e.g. for migration and introspection
2015-04-07Merge tag 'kvm-arm-for-4.1' of ↵Paolo Bonzini47-703/+1012
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into 'kvm-next' KVM/ARM changes for v4.1: - fixes for live migration - irqfd support - kvm-io-bus & vgic rework to enable ioeventfd - page ageing for stage-2 translation - various cleanups
2015-04-07Merge tag 'kvm-arm-fixes-4.0-rc5' of ↵Paolo Bonzini8-75/+105
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into 'kvm-next' Fixes for KVM/ARM for 4.0-rc5. Fixes page refcounting issues in our Stage-2 page table management code, fixes a missing unlock in a gicv3 error path, and fixes a race that can cause lost interrupts if signals are pending just prior to entering the guest.
2015-03-31KVM: s390: migrate vcpu interrupt stateJens Freimann5-0/+252
This patch adds support to migrate vcpu interrupts. Two new vcpu ioctls are added which get/set the complete status of pending interrupts in one go. The ioctls are marked as available with the new capability KVM_CAP_S390_IRQ_STATE. We can not use a ONEREG, as the number of pending local interrupts is not constant and depends on the number of CPUs. To retrieve the interrupt state we add an ioctl KVM_S390_GET_IRQ_STATE. Its input parameter is a pointer to a struct kvm_s390_irq_state which has a buffer and length. For all currently pending interrupts, we copy a struct kvm_s390_irq into the buffer and pass it to userspace. To store interrupt state into a buffer provided by userspace, we add an ioctl KVM_S390_SET_IRQ_STATE. It passes a struct kvm_s390_irq_state into the kernel and injects all interrupts contained in the buffer. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-31KVM: s390: refactor vcpu injection functionJens Freimann1-3/+12
Let's provide a version of kvm_s390_inject_vcpu() that does not acquire the local-interrupt lock and skips waking up the vcpu. To be used in a later patch for vcpu-local interrupt migration, where we are already holding the lock. Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-31KVM: s390: add ioctl to inject local interruptsJens Freimann4-1/+70
We have introduced struct kvm_s390_irq a while ago which allows to inject all kinds of interrupts as defined in the Principles of Operation. Add ioctl to inject interrupts with the extended struct kvm_s390_irq Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-31KVM: s390: cpu timer irq priorityDavid Hildenbrand1-7/+27
We now have a mechanism for delivering interrupts according to their priority. Let's inject them using our new infrastructure (instead of letting only hardware handle them), so we can be sure that the irq priorities are satisfied. For s390, the cpu timer and the clock comparator are to be checked for common code kvm_cpu_has_pending_timer(), although the cpu timer is only stepped when the guest is being executed. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-31KVM: s390: deliver floating interrupts in order of priorityJens Freimann5-367/+510
This patch makes interrupt handling compliant to the z/Architecture Principles of Operation with regard to interrupt priorities. Add a bitmap for pending floating interrupts. Each bit relates to a interrupt type and its list. A turned on bit indicates that a list contains items (interrupts) which need to be delivered. When delivering interrupts on a cpu we can merge the existing bitmap for cpu-local interrupts and floating interrupts and have a single mechanism for delivery. Currently we have one list for all kinds of floating interrupts and a corresponding spin lock. This patch adds a separate list per interrupt type. An exception to this are service signal and machine check interrupts, as there can be only one pending interrupt at a time. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-31KVM: s390: fix get_all_floating_irqsJens Freimann2-26/+35
This fixes a bug introduced with commit c05c4186bbe4 ("KVM: s390: add floating irq controller"). get_all_floating_irqs() does copy_to_user() while holding a spin lock. Let's fix this by filling a temporary buffer first and copy it to userspace after giving up the lock. Cc: <stable@vger.kernel.org> # 3.18+: 69a8d4562638 KVM: s390: no need to hold... Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-31x86: Use bool function return values of true/false not 1/0Joe Perches3-38/+38
Use the normal return values for bool functions Signed-off-by: Joe Perches <joe@perches.com> Message-Id: <9f593eb2f43b456851cd73f7ed09654ca58fb570.1427759009.git.joe@perches.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-31KVM: s390: enable more features that need no hypervisor changesChristian Borntraeger1-2/+2
After some review about what these facilities do, the following facilities will work under KVM and can, therefore, be reported to the guest if the cpu model and the host cpu provide this bit. There are plans underway to make the whole bit thing more readable, but its not yet finished. So here are some last bit changes and we enhance the KVM mask with: 9 The sense-running-status facility is installed in the z/Architecture architectural mode. ---> handled by SIE or KVM 10 The conditional-SSKE facility is installed in the z/Architecture architectural mode. ---> handled by SIE. KVM will retry SIE 13 The IPTE-range facility is installed in the z/Architecture architectural mode. ---> handled by SIE. KVM will retry SIE 36 The enhanced-monitor facility is installed in the z/Architecture architectural mode. ---> handled by SIE 47 The CMPSC-enhancement facility is installed in the z/Architecture architectural mode. ---> handled by SIE 48 The decimal-floating-point zoned-conversion facility is installed in the z/Architecture architectural mode. ---> handled by SIE 49 The execution-hint, load-and-trap, miscellaneous- instruction-extensions and processor-assist ---> handled by SIE 51 The local-TLB-clearing facility is installed in the z/Architecture architectural mode. ---> handled by SIE 52 The interlocked-access facility 2 is installed. ---> handled by SIE 53 The load/store-on-condition facility 2 and load-and- zero-rightmost-byte facility are installed in the z/Architecture architectural mode. ---> handled by SIE 57 The message-security-assist-extension-5 facility is installed in the z/Architecture architectural mode. ---> handled by SIE 66 The reset-reference-bits-multiple facility is installed in the z/Architecture architectural mode. ---> handled by SIE. KVM will retry SIE 80 The decimal-floating-point packed-conversion facility is installed in the z/Architecture architectural mode. ---> handled by SIE Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Tested-by: Michael Mueller <mimu@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-31KVM: s390: store the breaking-event address on pgm interruptsDavid Hildenbrand1-0/+2
If the PER-3 facility is installed, the breaking-event address is to be stored in the low core. There is no facility bit for PER-3 in stfl(e) and Linux always uses the value at address 272 no matter if PER-3 is available or not. We can't hide its existence from the guest. All program interrupts injected via the SIE automatically store this information if the PER-3 facility is available in the hypervisor. Also the itdb contains the address automatically. As there is no switch to turn this mechanism off, let's simply make it consistent and also store the breaking event address in case of manual program interrupt injection. Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-30KVM: arm/arm64: enable KVM_CAP_IOEVENTFDNikolay Nikolaev1-0/+1
As the infrastructure for eventfd has now been merged, report the ioeventfd capability as being supported. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> [maz: grouped the case entry with the others, fixed commit log] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-03-30KVM: arm/arm64: rework MMIO abort handling to use KVM MMIO busAndre Przywara8-221/+55
Currently we have struct kvm_exit_mmio for encapsulating MMIO abort data to be passed on from syndrome decoding all the way down to the VGIC register handlers. Now as we switch the MMIO handling to be routed through the KVM MMIO bus, it does not make sense anymore to use that structure already from the beginning. So we keep the data in local variables until we put them into the kvm_io_bus framework. Then we fill kvm_exit_mmio in the VGIC only, making it a VGIC private structure. On that way we replace the data buffer in that structure with a pointer pointing to a single location in a local variable, so we get rid of some copying on the way. With all of the virtual GIC emulation code now being registered with the kvm_io_bus, we can remove all of the old MMIO handling code and its dispatching functionality. I didn't bother to rename kvm_exit_mmio (to vgic_mmio or something), because that touches a lot of code lines without any good reason. This is based on an original patch by Nikolay. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Cc: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-03-30KVM: arm/arm64: prepare GICv3 emulation to use kvm_io_bus MMIO handlingAndre Przywara2-1/+39
Using the framework provided by the recent vgic.c changes, we register a kvm_io_bus device on mapping the virtual GICv3 resources. The distributor mapping is pretty straight forward, but the redistributors need some more love, since they need to be tagged with the respective redistributor (read: VCPU) they are connected with. We use the kvm_io_bus framework to register one devices per VCPU. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-03-30KVM: arm/arm64: merge GICv3 RD_base and SGI_base register framesAndre Przywara1-91/+83
Currently we handle the redistributor registers in two separate MMIO regions, one for the overall behaviour and SPIs and one for the SGIs/PPIs. That latter forces the creation of _two_ KVM I/O bus devices for each redistributor. Since the spec mandates those two pages to be contigious, we could as well merge them and save the churn with the second KVM I/O bus device. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-03-30KVM: remove useless check of "ret" variable prior to returning the same valueEugene Korenevsky1-3/+1
A trivial code cleanup. This `if` is redundant. Signed-off-by: Eugene Korenevsky <ekorenevsky@gmail.com> Message-Id: <20150328222717.GA6508@gnote> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-30KVM: x86: Remove redundant definitionsNadav Amit3-15/+12
Some constants are redfined in emulate.c. Avoid it. s/SELECTOR_RPL_MASK/SEGMENT_RPL_MASK s/SELECTOR_TI_MASK/SEGMENT_TI_MASK No functional change. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Message-Id: <1427635984-8113-3-git-send-email-namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-30KVM: x86: removing redundant eflags bits definitionsNadav Amit2-61/+46
The eflags are redefined (using other defines) in emulate.c. Use the definition from processor-flags.h as some mess already started. No functional change. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Message-Id: <1427635984-8113-2-git-send-email-namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-30KVM: x86: BSF and BSR emulation change register unnecassarilyNadav Amit1-1/+18
If the source of BSF and BSR is zero, the destination register should not change. That is how real hardware behaves. If we set the destination even with the same value that we had before, we may clear bits [63:32] unnecassarily. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Message-Id: <1427719163-5429-4-git-send-email-namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-30KVM: x86: POPA emulation may not clear bits [63:32]Nadav Amit1-16/+23
POPA should assign the values to the registers as usual registers are assigned. In other words, 32-bits register assignments should clear bits [63:32] of the register. Split the code of register assignments that will be used by future changes as well. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Message-Id: <1427719163-5429-3-git-send-email-namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-30KVM: x86: CMOV emulation on legacy mode is wrongNadav Amit1-2/+1
On legacy mode CMOV emulation should still clear bits [63:32] even if the assignment is not done. The previous fix 140bad89fd ("KVM: x86: emulation of dword cmov on long-mode should clear [63:32]") was incomplete. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Message-Id: <1427719163-5429-2-git-send-email-namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-30kvm: x86: i8259: return initialized data on invalid-size readPetr Matousek1-0/+1
If data is read from PIC with invalid access size, the return data stays uninitialized even though success is returned. Fix this by always initializing the data. Signed-off-by: Petr Matousek <pmatouse@redhat.com> Reported-by: Nadav Amit <nadav.amit@gmail.com> Message-Id: <20150311111609.GG8544@dhcp-25-225.brq.redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-30Merge tag 'kvm_mips_20150327' of ↵Paolo Bonzini23-366/+1877
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/kvm-mips into kvm-next MIPS KVM Guest FPU & SIMD (MSA) Support Add guest FPU and MIPS SIMD Architecture (MSA) support to MIPS KVM, by enabling the host FPU/MSA while in guest mode. This adds two new KVM capabilities, KVM_CAP_MIPS_FPU & KVM_CAP_MIPS_MSA, and supports the 3 FP register modes (FR=0, FR=1, FRE=1), and 128-bit MSA vector registers, with lazy FPU/MSA context save and restore. Some required MIPS FP/MSA fixes are merged in from a branch in the MIPS tree first.
2015-03-27MIPS: KVM: Wire up MSA capabilityJames Hogan3-0/+31
Now that the code is in place for KVM to support MIPS SIMD Architecutre (MSA) in MIPS guests, wire up the new KVM_CAP_MIPS_MSA capability. For backwards compatibility, the capability must be explicitly enabled in order to detect or make use of MSA from the guest. The capability is not supported if the hardware supports MSA vector partitioning, since the extra support cannot be tested yet and it extends the state that the userland program would have to save. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: linux-api@vger.kernel.org Cc: linux-doc@vger.kernel.org
2015-03-27MIPS: KVM: Expose MSA registersJames Hogan3-3/+86
Add KVM register numbers for the MIPS SIMD Architecture (MSA) registers, and implement access to them with the KVM_GET_ONE_REG / KVM_SET_ONE_REG ioctls when the MSA capability is enabled (exposed in a later patch) and present in the guest according to its Config3.MSAP bit. The MSA vector registers use the same register numbers as the FPU registers except with a different size (128bits). Since MSA depends on Status.FR=1, these registers are inaccessible when Status.FR=0. These registers are returned as a single native endian 128bit value, rather than least significant half first with each 64-bit half native endian as the kernel uses internally. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: linux-api@vger.kernel.org Cc: linux-doc@vger.kernel.org
2015-03-27MIPS: KVM: Add MSA exception handlingJames Hogan5-2/+140
Add guest exception handling for MIPS SIMD Architecture (MSA) floating point exceptions and MSA disabled exceptions. MSA floating point exceptions from the guest need passing to the guest kernel, so for these a guest MSAFPE is emulated. MSA disabled exceptions are normally handled by passing a reserved instruction exception to the guest (because no guest MSA was supported), but the hypervisor can now handle them if the guest has MSA by passing an MSA disabled exception to the guest, or if the guest has MSA enabled by transparently restoring the guest MSA context and enabling MSA and the FPU. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-27MIPS: KVM: Emulate MSA bits in COP0 interfaceJames Hogan1-2/+35
Emulate MSA related parts of COP0 interface so that the guest will be able to enable/disable MSA (Config5.MSAEn) once the MSA capability has been wired up. As with the FPU (Status.CU1) setting Config5.MSAEn has no immediate effect if the MSA state isn't live, as MSA state is restored lazily on first use. Changes after the MSA state has been restored take immediate effect, so that the guest can start getting MSA disabled exceptions right away for guest MSA operations. The MSA state is saved lazily too, as MSA may get re-enabled in the near future anyway. A special case is also added for when Status.CU1 is set while FR=0 and the MSA state is live. In this case we are at risk of getting reserved instruction exceptions if we try and save the MSA state, so we lose the MSA state sooner while MSA is still usable. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-27MIPS: KVM: Add base guest MSA supportJames Hogan6-19/+323
Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-27MIPS: KVM: Wire up FPU capabilityJames Hogan3-0/+51
Now that the code is in place for KVM to support FPU in MIPS KVM guests, wire up the new KVM_CAP_MIPS_FPU capability. For backwards compatibility, the capability must be explicitly enabled in order to detect or make use of the FPU from the guest. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: linux-api@vger.kernel.org Cc: linux-doc@vger.kernel.org
2015-03-27MIPS: KVM: Expose FPU registersJames Hogan3-11/+114
Add KVM register numbers for the MIPS FPU registers, and implement access to them with the KVM_GET_ONE_REG / KVM_SET_ONE_REG ioctls when the FPU capability is enabled (exposed in a later patch) and present in the guest according to its Config1.FP bit. The registers are accessible in the current mode of the guest, with each sized access showing what the guest would see with an equivalent access, and like the architecture they may become UNPREDICTABLE if the FR mode is changed. When FR=0, odd doubles are inaccessible as they do not exist in that mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: linux-api@vger.kernel.org Cc: linux-doc@vger.kernel.org
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-19 16:03:00 +0000