summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2021-12-20staging: greybus: fix stack size warning with UBSANArnd Bergmann1-47/+45
clang warns about excessive stack usage in this driver when UBSAN is enabled: drivers/staging/greybus/audio_topology.c:977:12: error: stack frame size of 1836 bytes in function 'gbaudio_tplg_create_widget' [-Werror,-Wframe-larger-than=] Rework this code to no longer use compound literals for initializing the structure in each case, but instead keep the common bits in a preallocated constant array and copy them as needed. Link: https://github.com/ClangBuiltLinux/linux/issues/1535 Link: https://lore.kernel.org/r/20210103223541.2790855-1-arnd@kernel.org/ Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> [nathan: Address review comments from v1] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20211209195141.1165233-1-nathan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20staging: r8188: move the steps into Hal8188EPwrSeq.cMartin Kaiser2-58/+33
Move the power transition steps into Hal8188EPwrSeq.c where the arrays are defined. There's no point in having defines for sequences of steps in the include file. All of these sequences are used only once (apart from the end sequence). Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211219183926.4746-10-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20staging: r8188: reformat the power transition stepsMartin Kaiser1-46/+38
Clean up the definitions of the power transition steps and address some checkpatch warnings. Reduce the line lengths where possible. Add spaces between elements. Rewrite comments that are in contradiction with the definition they describe. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211219183926.4746-9-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20staging: r8188: remove unused power commandMartin Kaiser1-5/+0
None of the remaining power transition steps used PWR_CMD_READ. It can be removed. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211219183926.4746-8-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20staging: r8188: remove base address from power transitionsMartin Kaiser2-44/+33
Remove the base entry from the power transition steps. This field is not used. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211219183926.4746-7-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20staging: r8188: remove interface mask from power transitionsMartin Kaiser4-92/+76
For the r8188 driver, we always have a usb interface. We can remove the power transition steps that are not applicable for a usb interface. We can then remove the interface mask itself. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211219183926.4746-6-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20staging: r8188: remove fab mask from power transitionsMartin Kaiser4-55/+43
Remove the fab mask from the steps of the power transitions. The fab mask is not used, all values are allowed for all steps. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211219183926.4746-5-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20staging: r8188: remove cut mask from power transitionsMartin Kaiser4-58/+42
Remove the power cut mask from the steps of the power transitions. The power cut mask is not used, all values are allowed for all steps. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211219183926.4746-4-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20staging: r8188: remove sizes from power transition arraysMartin Kaiser2-12/+6
There's no need to set the array size explicitly if an array is initialized with a constant value. Remove the array sizes and related definitions for the power transition arrays. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211219183926.4746-3-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20staging: r8188: remove unused power transitionsMartin Kaiser2-128/+4
The r8188 driver defines a number of transitions between different power states. Remove the transitions which are not used by the rest of the code. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211219183926.4746-2-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20staging: r8188: ODM_BB_RA_MASK is always setMartin Kaiser3-6/+1
Remove the ODM_BB_RA_MASK capability. It is always set for this driver. Like for ODM_BB_DIG before, we can be sure that ODM_BB_RA_MASK was never checked before it was set. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211218120423.29906-10-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20staging: r8188: ODM_BB_DIG is always setMartin Kaiser3-5/+2
Remove the ODM_BB_DIG capability. It is always set for this driver. (ODM_BB_DIG was set in Update_ODM_ComInfo_88E and checked in odm_DIG, which was always called after the capability was set.) Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211218120423.29906-9-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20staging: r8188: remove unused odm capabilitiesMartin Kaiser2-10/+1
Remove odm capabilities which are either unused or set but never checked. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211218120423.29906-8-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20staging: r8188: Bssid in struct fast_ant_train is set but not usedMartin Kaiser2-5/+1
Bssid in struct fast_ant_train is set but not used. Remove it. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211218120423.29906-7-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20staging: r8188: antSumRSSI is set but not usedMartin Kaiser3-5/+2
antSumRSSI in struct fast_ant_train is set but not used. Remove it. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211218120423.29906-6-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20staging: r8188: antRSSIcnt is set but not usedMartin Kaiser3-3/+0
antRSSIcnt in struct fast_ant_train is set but not used. Remove it. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211218120423.29906-5-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20staging: r8188: antAveRSSI is set but not usedMartin Kaiser2-2/+0
antAveRSSI in struct fast_ant_train is set but not used. Remove it. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211218120423.29906-4-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20staging: r8188: remove the dummy ioctl handlerMartin Kaiser1-17/+0
The r8188 driver installs a dummy handler for some unused ioctls. All that the dummy handler does is return -1. Remove the dummy handler and let the wext core handle unused ioctls. This way, user space gets a consistent errno for an unused wext ioctl, regardless of which driver is used for the interface. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211218120423.29906-3-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20staging: r8188: make rx signal strength function staticMartin Kaiser1-3/+2
The _linked_rx_signal_strength_display function is used only in rtw_mlme_ext.c. Make the function static and remove the prototype. While at it, fix a typo in the function name. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211218120423.29906-2-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20staging: r8188eu: clean up rtl8188e_sreset_linked_status_checkMartin Kaiser1-9/+8
Clean up the rtl8188e_sreset_linked_status_check, which has just been moved to rtw_mlme_ext. Don't initialise variables to 0 if the first access sets a new value. Check the value of fw_status only once. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211212185833.22000-4-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20staging: r8188eu: move linked status check from hal to rtw_mlme_extMartin Kaiser6-41/+18
Move rtl8188e_sreset_linked_status_check from the hal layer into rtw_mlme_ext.c. Like the xmit status check, this is a simple function that's only called from one place. With this function gone, hal/rtl8188e_sreset.c and include/rtl8188e_sreset.h are now empty and can be removed. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211212185833.22000-3-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20staging: r8188eu: move xmit status check from hal to rtw_cmdMartin Kaiser3-13/+12
Move rtl8188e_sreset_xmit_status_check from the hal layer into rtw_cmd.c. As this driver supports only the 8188 chipset, there's no need to go through the hal layer for simple operations that have only one caller. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211212185833.22000-2-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20staging: rtl8723bs: fix typo in a commentJason Wang1-1/+1
The double `for' in the comment in line 2203 is repeated. Remove one of them from the comment. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Link: https://lore.kernel.org/r/20211211091632.264035-1-wangborong@cdjrlc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20staging: rtl8192u: remove some repeated words in some commentsJason Wang1-2/+2
The double `new' in the comment in line 1349 and `to' in the comment in line 2030 are repeated. Remove the repeated words from these comments. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Link: https://lore.kernel.org/r/20211211091422.260442-1-wangborong@cdjrlc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-09staging: rtl8712: Fix alignment checks with flipped conditionNgo Tak Fong1-15/+13
Fixed two CHECKs of Alignment should match open parenthesis and flipped a condition to pull the code in one tab. Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ngo Tak Fong <simon.fodin@gmail.com> Link: https://lore.kernel.org/r/20211207212223.GA70594@simon-desktop Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-09staging: r8188eu: remove LedPin from struct struct LED_871xMartin Kaiser3-17/+3
We only support a single LED. LedPin in struct struct LED_871x is always LED_PIN_LED0. There's no need to store this info or to pass it to functions as a parameter. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211207210537.23382-4-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-09staging: r8188eu: remove code to set led1 registersMartin Kaiser2-26/+7
This driver uses only led0. Remove the register settings to switch led1 on and off. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211207210537.23382-3-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-09staging: r8188eu: remove SwLed1Martin Kaiser2-4/+0
The r8188eu driver does not use SwLed1. Calls from other layers to modify the led state end up in SwLedControlMode1, where SwLed0 is hard-coded. This patch removes the code to initialise and deinitialise SwLed1 and the SwLed1 struct itself. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211207210537.23382-2-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-09staging: r8188eu: convert type of HalData in struct adapterMichael Straube16-120/+89
adapter->HalData is used in the GET_HAL_DATA macro all across the driver code but nobody checks if its allocation in rtl188eu_alloc_haldata() was successful or not. To avoid errors when the allocation fails convert the type of field HalData from void pointer to struct hal_data_8188eu. Remove GET_HAL_DATA, rtl8188eu_alloc_haldata(), rtl8188e_free_hal_data(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20211207140405.8673-1-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-07staging: r8188eu: convert/remove DBG_88E calls in core/rtw_cmd.cPhillip Potter1-8/+4
Convert two DBG_88E calls within core/rtw_cmd.c to netdev_dbg calls, and remove three commented DBG_88E calls. Considering the original driver author commented them, it seems better to delete these three than convert. Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Link: https://lore.kernel.org/r/20211206234952.1238-3-phil@philpotter.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-07staging: r8188eu: convert DBG_88E calls in core/rtw_security.cPhillip Potter1-8/+14
Convert all DBG_88E calls in core/rtw_security.c to netdev_dbg calls. These calls seem to contain useful information/assertions and so are probably worth keeping. In doing this conversion, also convert static aes_decipher to take a struct adapter * parameter, as per the convention elsewhere in the driver currently. This allows us to pass this through and access its pnetdev member for the netdev_dbg call in the function. Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Link: https://lore.kernel.org/r/20211206234952.1238-2-phil@philpotter.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-07staging: r8188eu: remove unused macro IS_FW_81xxCMichael Straube1-2/+0
The macro IS_FW_81xxC is not used. Remove it. Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20211205171342.20551-11-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-07staging: r8188eu: bWIFI_Display is set but never usedMichael Straube4-9/+0
bWIFI_Display in odm_dm_struct is set but never used. Remove it. Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20211205171342.20551-10-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-07staging: r8188eu: bWIFI_Direct is set but never usedMichael Straube5-12/+0
bWIFI_Direct in odm_dm_struct is set but never used. Remove it. Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20211205171342.20551-9-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-07staging: r8188eu: remove duplicate definesMichael Straube2-11/+1
The following constants are defined in three different header files. IQK_MAC_REG_NUM IQK_ADDA_REG_NUM IQK_BB_REG_NUM HP_THERMAL_NUM Keep them in odm.h and remove them from Hal8188EPhyCfg.h and rtl8188e_dm.h. Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20211205171342.20551-8-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-07staging: r8188eu: remove macro PHY_QueryBBRegMichael Straube5-13/+10
The macro PHY_QueryBBReg just re-defines rtl8188e_PHY_QueryBBReg(). Call rtl8188e_PHY_QueryBBReg() directly and remove the macro. Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20211205171342.20551-7-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-07staging: r8188eu: remove macro PHY_SetBBRegMichael Straube5-28/+26
The macro PHY_SetBBReg just re-defines rtl8188e_PHY_SetBBReg(). Call rtl8188e_PHY_SetBBReg() directly and remove the macro. Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20211205171342.20551-6-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-07staging: r8188eu: remove macro PHY_QueryRFRegMichael Straube4-8/+6
The macro PHY_QueryRFReg just re-defines rtl8188e_PHY_QueryRFReg(). Call rtl8188e_PHY_QueryRFReg() directly and remove the macro. Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20211205171342.20551-5-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-07staging: r8188eu: remove macro PHY_SetRFRegMichael Straube5-7/+5
The macro PHY_SetRFReg just re-defines rtl8188e_PHY_SetRFReg(). Call rtl8188e_PHY_SetRFReg() directly and remove the macro. Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20211205171342.20551-4-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-07staging: r8188eu: struct odm_mac_status_info is not usedMichael Straube1-4/+0
The structure odm_mac_status_info is not used. Remove it. Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20211205171342.20551-3-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-07staging: r8188eu: remove RF_PATH_{C,D}Michael Straube3-27/+1
pHalData->PHYRegDef[RF_PATH_C] and pHalData->PHYRegDef[RF_PATH_D] are initialized but not used. Remove them and remove RF_PATH_C and RF_PATH_D from the rf_radio_path enum. Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20211205171342.20551-2-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-07staging: r8188eu: AntCombination is always 2Martin Kaiser1-33/+8
AntCombination is initialized with 2 and never changed. Remove resulting dead code. Acked-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211205151251.6861-11-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-07staging: r8188eu: remove unused defineMartin Kaiser1-2/+0
Remove the _IOCTL_LINUX_C_ define, which is not used. Acked-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211205151251.6861-10-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-07staging: r8188eu: remove two write-only wifi direct variablesMartin Kaiser2-15/+0
Remove two variables related to wifidirect which are set but not used. Acked-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211205151251.6861-9-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-07staging: r8188eu: remove empty HAL_INIT_PROFILE_TAG macroMartin Kaiser1-24/+0
Remove the HAL_INIT_PROFILE_TAG macro, which is empty. Acked-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211205151251.6861-8-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-07staging: r8188eu: hal data's interfaceIndex is never readMartin Kaiser2-5/+0
interfaceIndex in struct hal_data_8188e is set but not used. It can be removed. Acked-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211205151251.6861-7-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-07staging: r8188eu: remove unused macros from drv_types.hMartin Kaiser1-6/+0
Remove some unused macros from drv_types.h. Acked-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211205151251.6861-6-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-07staging: r8188eu: bHWPowerdown is set but not usedMartin Kaiser2-9/+2
bHWPowerdown in struct pwrctrl_priv is set but never read. Remove it. Acked-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211205151251.6861-5-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-07staging: r8188eu: remove two unused macrosMartin Kaiser1-18/+0
Remove two unused macros that increment and decrement a "mutex counter". Acked-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211205151251.6861-4-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-07staging: r8188eu: remove a bunch of unused led definesMartin Kaiser1-32/+0
Remove a couple of unused defines from rtw_led.h. Acked-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20211205151251.6861-3-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-30 23:06:22 +0000