summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2020-08-25netlink: remove duplicated nla_need_padding_for_64bit() checkMiaohe Lin1-2/+1
The need for padding 64bit is implicitly checked by nla_align_64bit(), so remove this explicit one. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25net: gain ipv4 mtu when mtu is not lockedMiaohe Lin1-1/+2
When mtu is locked, we should not obtain ipv4 mtu as we return immediately in this case and leave acquired ipv4 mtu unused. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24Merge tag 'batadv-next-for-davem-20200824' of ↵David S. Miller14-31/+15
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - Drop unused function batadv_hardif_remove_interfaces(), by Sven Eckelmann - delete duplicated words, by Randy Dunlap - Drop (even more) repeated words in comments, by Sven Eckelmann - Migrate to linux/prandom.h, by Sven Eckelmann ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24Merge branch 'Add-PTP-support-for-Octeontx2'David S. Miller20-10/+1031
Subbaraya Sundeep says: ==================== Add PTP support for Octeontx2 This patchset adds PTP support for Octeontx2 platform. PTP is an independent coprocessor block from which CGX block fetches timestamp and prepends it to the packet before sending to NIX block. Patches are as follows: Patch 1: Patch to enable/disable packet timstamping in CGX upon mailbox request. It also adjusts packet parser (NPC) for the 8 bytes timestamp appearing before the packet. Patch 2: Patch adding PTP pci driver which configures the PTP block and hooks up to RVU AF driver. It also exposes a mailbox call to adjust PTP hardware clock. Patch 3: Patch adding PTP clock driver for PF netdev. v8: Added missing header file reported by kernel test robot in patch 2 v7: As per Jesse Brandeburg comments: Simplified functions in patch 1 Replaced magic numbers with macros Added Copyrights Added code comments wherever required Modified commit description of patch 2 v6: Resent after net-next is open v5: As suggested by David separated the fix (adding rtnl lock/unlock) and submitted to net. https://www.spinics.net/lists/netdev/msg669617.html v4: Added rtnl_lock/unlock in otx2_reset to protect against network stack ndo_open and close calls Added NULL check after ptp_clock_register in otx2_ptp.c v3: Fixed sparse error in otx2_txrx.c Removed static inlines in otx2_txrx.c v2: Fixed kernel build robot reported error by adding timecounter.h to otx2_common.h ==================== Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24octeontx2-pf: Add support for PTP clockAleksey Makarov9-6/+532
This patch adds PTP clock and uses it in Octeontx2 network device. PTP clock uses mailbox calls to access the hardware counter on the RVU side. Co-developed-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Aleksey Makarov <amakarov@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24octeontx2-af: Add support for Marvell PTP coprocessorAleksey Makarov6-4/+348
Precision Timestamping block found on Octeontx2 platform is an independent coprocessor and has internal PTP hardware clock. Once configured PTP runs independently and when a packet arrives CGX hardware block gets the current timestamp from PTP block and forwards the packet to NIX by prepending timestamp to the packet. This patch adds the pci driver for PTP block. The driver gets registered by AF driver and does initial configuration and exposes a mailbox function to read and adjust PTP hardware clock. The mailbox function is called by AF consumers like netdev drivers or userspace drivers. Since PTP being a single block in platform this driver helps in accessing PTP block by any AF consumer. Co-developed-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Aleksey Makarov <amakarov@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24octeontx2-af: Support to enable/disable HW timestampingZyta Szpak7-0/+151
Four new mbox messages ids and handler are added in order to enable or disable timestamping procedure on tx and rx side. Additionally when PTP is enabled, the packet parser must skip over 8 bytes and start analyzing packet data there. To make NPC profiles work seemlesly PTR_ADVANCE of IKPU is set so that parsing can be done as before when all data pointers are shifted by 8 bytes automatically. Co-developed-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Zyta Szpak <zyta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: Use helper macro RT_TOS() in __icmp_send()Miaohe Lin1-2/+2
Use helper macro RT_TOS() to get tos in __icmp_send(). Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: Avoid access icmp_err_convert when icmp code is ICMP_FRAG_NEEDEDMiaohe Lin1-2/+3
There is no need to fetch errno and fatal info from icmp_err_convert when icmp code is ICMP_FRAG_NEEDED. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24Merge branch 'qed-introduce-devlink-health-support'David S. Miller10-160/+375
Igor Russkikh says: ==================== qed: introduce devlink health support This is a followup implementation after series https://patchwork.ozlabs.org/project/netdev/cover/20200514095727.1361-1-irusskikh@marvell.com/ This is an implementation of devlink health infrastructure. With this we are now able to report HW errors to devlink, and it'll take its own actions depending on user configuration to capture and store the dump at the bad moment, and to request the driver to recover the device. So far we do not differentiate global device failures or specific PCI function failures. This means that some errors specific to one physical function will affect an entire device. This is not yet fully designed and verified, will followup in future. Solution was verified with artificial HW errors generated, existing tools for dump analysis could be used. v7: comments from Jesse and Jakub - p2: extra edev check - p9: removed extra indents v6: patch 4: changing serial to board.serial and fw to fw.app v5: improved patch 4 description v4: - commit message and other fixes after Jiri's comments - removed one patch (will send to net) v3: fix uninit var usage in patch 11 v2: fix #include issue from kbuild test robot. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24qede: make driver reliable on unload after failuresIgor Russkikh1-2/+6
In case recovery was not successful, netdev still should be present. But we should clear cdev if something bad happens on recovery. We also check cdev for null on dev close. That could be a case if recovery was not successful. Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24qed: align adjacent indentIgor Russkikh1-36/+33
Remove extra indent on some of adjacent declarations. Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24qed: implement devlink dumpIgor Russkikh1-0/+43
Gather and push out full device dump to devlink. Device dump is the same as with `ethtool -d`, but now its generated exactly at the moment bad thing happens. Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24qed*: make use of devlink recovery infrastructureIgor Russkikh4-11/+16
Remove forcible recovery trigger and put it as a normal devlink callback. This allows user to enable/disable it via devlink health set pci/0000:03:00.0 reporter fw_fatal auto_recover false Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24qed: use devlink logic to report errorsIgor Russkikh6-0/+29
Use devlink_health_report to push error indications. We implement this in qede via callback function to make it possible to reuse the same for other drivers sitting on top of qed in future. Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24qed: health reporter init deinit seqIgor Russkikh3-0/+38
Here we declare health reporter ops (empty for now) and register these in qed probe and remove callbacks. This way we get devlink attached to all kind of qed* PCI device entities: networking or storage offload entity. Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24qed: implement devlink info requestIgor Russkikh4-1/+60
Here we return existing fw & mfw versions, we also fetch device's serial number: ~$ sudo ~/iproute2/devlink/devlink dev info pci/0000:01:00.1: driver qed board.serial_number REE1915E44552 versions: running: fw.app 8.42.2.0 stored: fw.mgmt 8.52.10.0 MFW and FW are different firmwares on device. Management is a firmware responsible for link configuration and various control plane features. Its permanent and resides in NVM. Running FW (or fastpath FW) is an embedded microprogram implementing all the packet processing, offloads, etc. This FW is being loaded on each start by the driver from FW binary blob. The base device specific structure (qed_dev_info) was not directly available to the base driver before. Thus, here we create and store a private copy of this structure in qed_dev root object to access the data. Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24qed: fix kconfig help entriesIgor Russkikh1-2/+3
This patch replaces stubs in kconfig help entries with an actual description. Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24qed/qede: make devlink survive recoveryIgor Russkikh7-35/+48
Devlink instance lifecycle was linked to qed_dev object, that caused devlink to be recreated on each recovery. Changing it by making higher level driver (qede) responsible for its life. This way devlink now survives recoveries. qede now stores devlink structure pointer as a part of its device object, devlink private data contains a linkage structure, qed_devlink. Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24qed: move out devlink logic into a new fileIgor Russkikh4-101/+127
We are extending devlink infrastructure, thus move the existing stuff into a new file qed_devlink.c Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24chelsio: switch from 'pci_' to 'dma_' APIChristophe JAILLET2-35/+39
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'free_rx_resources()' and 'alloc_tx_resources()' (sge.c) GFP_KERNEL can be used because it is already used in these functions. Moreover, they can only be called from a .ndo_open function. So it is guarded by the 'rtnl_lock()', which is a mutex. While at it, a pr_err message in 'init_one()' has been updated accordingly (s/consistent/coherent). @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24Merge branch 'mlxsw-Misc-updates'David S. Miller7-110/+28
Ido Schimmel says: ==================== mlxsw: Misc updates This patch set includes various updates for mlxsw. Patches #1-#4 adjust the default burst size of packet trap policers to conform to Spectrum-{2,3} requirements. The corresponding selftest is also adjusted so that it could reliably pass on these platforms. Patch #5 adjusts a selftest so that it could pass with both old and new versions of mausezahn. Patch #6 significantly reduces the runtime of tc-police scale test by changing the preference and masks of the used tc filters. Patch #7 prevents the driver from trying to set invalid ethtool link modes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24mlxsw: spectrum_ethtool: Remove internal speeds from PTYS registerDanielle Ratson3-68/+1
The PTYS register is used to report and configure the port type and speed. Currently, internal bits in the register are used the same way other bits are used. Using the internal bits can cause bad parameter firmware errors. For example, trying to write to internal bit 25 returns: EMAD reg access failed (tid=53e2bffa00004310,reg_id=5004(ptys),type=write,status=7(bad parameter)) Remove the internal bits from the PTYS register, so that it is no longer possible to pass them to firmware. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24selftests: mlxsw: Reduce runtime of tc-police scale testIdo Schimmel1-2/+10
Currently, the test takes about 626 seconds to complete because of an inefficient use of the device's TCAM. Reduce the runtime to 202 seconds by inserting all the flower filters with the same preference and mask, but with a different key. In particular, this reduces the deletion of the qdisc (which triggers the deletion of all the filters) from 66 seconds to 0.2 seconds. This prevents various netlink requests from user space applications (e.g., systemd-networkd) from timing-out because RTNL is not held for too long anymore. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24selftests: forwarding: Fix mausezahn delay parameter in mirror_test()Danielle Ratson1-1/+1
Currently, mausezahn delay parameter in mirror_test() is specified with 'ms' units. mausezahn versions before 0.6.5 interpret 'ms' as seconds and therefore the tests that use mirror_test() take a very long time to complete. Resolve this by specifying 'msec' units. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24selftests: mlxsw: Increase burst size for burst testIdo Schimmel1-25/+2
The current combination of rate and burst size does not adhere to Spectrum-{2,3} limitation which states that the minimum burst size should be 40% of the rate. Increase the burst size in order to honor above mentioned limitation and avoid intermittent failures of this test case on Spectrum-{2,3}. Remove the first sub-test case as the variation in number of received packets is simply too large to reliably test it. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24selftests: mlxsw: Increase burst size for rate testIdo Schimmel1-1/+1
The current combination of rate and burst size does not adhere to Spectrum-{2,3} limitation which states that the minimum burst size should be 40% of the rate. Increase the burst size in order to honor above mentioned limitation and avoid intermittent failures of this test case on Spectrum-{2,3}. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24selftests: mlxsw: Decrease required rate accuracyIdo Schimmel1-2/+2
On Spectrum-{2,3} the required accuracy is +/-10%. Align the test to this requirement so that it can reliably pass on these platforms. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24mlxsw: spectrum_trap: Adjust default policer burst size for Spectrum-{2, 3}Ido Schimmel1-11/+11
On the Spectrum-{2,3} ASICs the minimum burst size of the packet trap policers needs to be 40% of the configured rate. Otherwise, intermittent drops are observed even when the incoming packet rate is slightly lower than the configured policer rate. Adjust the burst size of the registered packet trap policers so that they do not violate above mentioned limitation. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: atheros: switch from 'pci_' to 'dma_' APIChristophe JAILLET4-77/+88
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'atl1e_setup_ring_resources()' (atl1e_main.c), 'atl1_setup_ring_resources()' (atl1.c) and 'atl2_setup_ring_resources()' (atl2.c) GFP_KERNEL can be used because it can be called from a .ndo_open. 'atl1_setup_ring_resources()' (atl1.c) can also be called from a '.set_ringparam' (see struct ethtool_ops) where sleep is also allowed. Both cases are protected by 'rtnl_lock()' which is a mutex. So these function can sleep. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24starfire: switch from 'pci_' to 'dma_' APIChristophe JAILLET1-35/+42
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'netdev_open()', GFP_ATOMIC must be used because it can be called from a .ndo_tx_timeout function. So this function can be called with the 'netif_tx_lock' acquired. The call chain is: --> tx_timeout (.ndo_tx_timeout function) --> netdev_open @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24typhoon: switch from 'pci_' to 'dma_' APIChristophe JAILLET1-31/+30
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'typhoon_init_one()' GFP_KERNEL can be used because it is a probe function and no lock is acquired. When memory is allocated in 'typhoon_download_firmware()', GFP_ATOMIC must be used because it can be called from a .ndo_tx_timeout function. So this function can be called with the 'netif_tx_lock' acquired. The call chain is: --> typhoon_tx_timeout (.ndo_tx_timeout function) --> typhoon_start_runtime --> typhoon_download_firmware While at is, update some comments accordingly. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: David Dillow <dave@thedillows.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: dccp: delete repeated wordsRandy Dunlap3-3/+3
Drop duplicated words in /net/dccp/. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Cc: dccp@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: netlink: delete repeated wordsRandy Dunlap2-5/+5
Drop duplicated words in net/netlink/. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: ipv4: delete repeated wordsRandy Dunlap5-6/+6
Drop duplicate words in comments in net/ipv4/. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24Merge branch 'net-sctp-delete-duplicated-words-plus-other-fixes'David S. Miller7-14/+14
Randy Dunlap says: ==================== net: sctp: delete duplicated words + other fixes Drop or fix repeated words in net/sctp/. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: sctp: ulpqueue.c: delete duplicated wordRandy Dunlap1-1/+1
Drop the repeated word "an". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: linux-sctp@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: sctp: sm_make_chunk.c: delete duplicated words + fix typoRandy Dunlap1-3/+3
Drop the repeated words "for", "that", and "a". Change "his" to "this". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: linux-sctp@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: sctp: protocol.c: delete duplicated words + punctuationRandy Dunlap1-4/+4
Drop the repeated words "of" and "that". Add some punctuation for readability. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: linux-sctp@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: sctp: chunk.c: delete duplicated wordRandy Dunlap1-1/+1
Drop the repeated word "the". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: linux-sctp@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: sctp: bind_addr.c: delete duplicated wordRandy Dunlap1-1/+1
Drop the repeated word "of". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: linux-sctp@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: sctp: auth.c: delete duplicated wordsRandy Dunlap1-2/+2
Drop the repeated word "the" and "now". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: linux-sctp@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: sctp: associola.c: delete duplicated wordsRandy Dunlap1-2/+2
Drop the repeated word "the" in two places. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: linux-sctp@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24io_uring: ignore POLLIN for recvmsg on MSG_ERRQUEUELuke Hsiao1-0/+6
Currently, io_uring's recvmsg subscribes to both POLLERR and POLLIN. In the context of TCP tx zero-copy, this is inefficient since we are only reading the error queue and not using recvmsg to read POLLIN responses. This patch was tested by using a simple sending program to call recvmsg using io_uring with MSG_ERRQUEUE set and verifying with printks that the POLLIN is correctly unset when the msg flags are MSG_ERRQUEUE. Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Luke Hsiao <lukehsiao@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24io_uring: allow tcp ancillary data for __sys_recvmsg_sock()Luke Hsiao4-3/+10
For TCP tx zero-copy, the kernel notifies the process of completions by queuing completion notifications on the socket error queue. This patch allows reading these notifications via recvmsg to support TCP tx zero-copy. Ancillary data was originally disallowed due to privilege escalation via io_uring's offloading of sendmsg() onto a kernel thread with kernel credentials (https://crbug.com/project-zero/1975). So, we must ensure that the socket type is one where the ancillary data types that are delivered on recvmsg are plain data (no file descriptors or values that are translated based on the identity of the calling process). This was tested by using io_uring to call recvmsg on the MSG_ERRQUEUE with tx zero-copy enabled. Before this patch, we received -EINVALID from this specific code path. After this patch, we could read tcp tx zero-copy completion notifications from the MSG_ERRQUEUE. Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Arjun Roy <arjunroy@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jann Horn <jannh@google.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Luke Hsiao <lukehsiao@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24Merge branch 'devlink-fixes-for-port-and-reporter-field-access'David S. Miller1-4/+7
Parav Pandit says: ==================== devlink fixes for port and reporter field access These series contains two small fixes of devlink. Patch-1 initializes port reporter fields early enough to avoid access before initialized error. Patch-2 protects port list lock during traversal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24devlink: Protect devlink port list traversalParav Pandit1-0/+3
Cited patch in fixes tag misses to protect port list traversal while traversing per port reporter list. Protect it using devlink instance lock. Fixes: f4f541660121 ("devlink: Implement devlink health reporters on per-port basis") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24devlink: Fix per port reporter fields initializationParav Pandit1-4/+4
Cited patch in fixes tag initializes reporters_list and reporters_lock of a devlink port after devlink port is added to the list. Once port is added to the list, devlink_nl_cmd_health_reporter_get_dumpit() can access the uninitialized mutex and reporters list head. Fix it by initializing port reporters field before adding port to the list. Fixes: f4f541660121 ("devlink: Implement devlink health reporters on per-port basis") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24ibmvnic: Fix use-after-free of VNIC login response bufferThomas Falcon2-22/+25
The login response buffer is freed after it is received and parsed, but other functions in the driver still attempt to read it, such as when the device is opened, causing the Oops below. Store relevant information in the driver's private data structures and use those instead. BUG: Kernel NULL pointer dereference on read at 0x00000010 Faulting instruction address: 0xc00800000050a900 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables ibmvnic ibmveth crc32c_vpmsum autofs4 CPU: 7 PID: 759 Comm: NetworkManager Not tainted 5.9.0-rc1-00124-gd0a84e1f38d9 #14 NIP: c00800000050a900 LR: c00800000050a8f0 CTR: 00000000005b1904 REGS: c0000001ed746d20 TRAP: 0300 Not tainted (5.9.0-rc1-00124-gd0a84e1f38d9) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24428484 XER: 00000001 CFAR: c0000000000101b0 DAR: 0000000000000010 DSISR: 40000000 IRQMASK: 0 GPR00: c00800000050a8f0 c0000001ed746fb0 c008000000518e00 0000000000000000 GPR04: 00000000000000c0 0000000000000080 0003c366c60c4501 0000000000000352 GPR08: 000000000001f400 0000000000000010 0000000000000000 0000000000000000 GPR12: 0001cf0000000019 c00000001ec97680 00000001003dfd40 0000010008dbb22c GPR16: 0000000000000000 0000000000000000 0000000000000000 c000000000edb6c8 GPR20: c000000004e73e00 c000000004fd2448 c000000004e6d700 c000000004fd2448 GPR24: c000000004fd2400 c000000004a0cd20 c0000001ed961860 c0080000005029d8 GPR28: 0000000000000000 0000000000000003 c000000004a0c000 0000000000000000 NIP [c00800000050a900] init_resources+0x338/0xa00 [ibmvnic] LR [c00800000050a8f0] init_resources+0x328/0xa00 [ibmvnic] Call Trace: [c0000001ed746fb0] [c00800000050a8f0] init_resources+0x328/0xa00 [ibmvnic] (unreliable) [c0000001ed747090] [c00800000050b024] ibmvnic_open+0x5c/0x100 [ibmvnic] [c0000001ed747110] [c000000000bdcc0c] __dev_open+0x17c/0x250 [c0000001ed7471b0] [c000000000bdd1ec] __dev_change_flags+0x1dc/0x270 [c0000001ed747260] [c000000000bdd2bc] dev_change_flags+0x3c/0x90 [c0000001ed7472a0] [c000000000bf24b8] do_setlink+0x3b8/0x1280 [c0000001ed747450] [c000000000bf8cc8] __rtnl_newlink+0x5a8/0x980 [c0000001ed7478b0] [c000000000bf9110] rtnl_newlink+0x70/0xb0 [c0000001ed7478f0] [c000000000bf07c4] rtnetlink_rcv_msg+0x364/0x460 [c0000001ed747990] [c000000000c68b94] netlink_rcv_skb+0x84/0x1a0 [c0000001ed747a00] [c000000000bef758] rtnetlink_rcv+0x28/0x40 [c0000001ed747a20] [c000000000c68188] netlink_unicast+0x218/0x310 [c0000001ed747a80] [c000000000c6848c] netlink_sendmsg+0x20c/0x4e0 [c0000001ed747b20] [c000000000b9dc88] ____sys_sendmsg+0x158/0x360 [c0000001ed747bb0] [c000000000ba1c88] ___sys_sendmsg+0x98/0xf0 [c0000001ed747d10] [c000000000ba1db8] __sys_sendmsg+0x78/0x100 [c0000001ed747dc0] [c000000000033820] system_call_exception+0x160/0x280 [c0000001ed747e20] [c00000000000d740] system_call_common+0xf0/0x27c Instruction dump: 3be00000 38810068 b1410076 3941006a 93e10072 fbea0000 b1210068 4bff9915 eb9e0ca0 eabe0900 393c0010 3ab50048 <7fa04c2c> 7fba07b4 7b431764 7b4917a0 ---[ end trace fbc5949a28e103bd ]--- Fixes: f3ae59c0c015 ("ibmvnic: store RX and TX subCRQ handle array in ibmvnic_adapter struct") Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24ipvlan: advertise link netns via netlinkTaehee Yoo1-0/+8
Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Test commands: ip netns add nst ip link add dummy0 type dummy ip link add ipvlan0 link dummy0 type ipvlan ip link set ipvlan0 netns nst ip netns exec nst ip link show ipvlan0 Result: ---Before--- 6: ipvlan0@if5: <BROADCAST,MULTICAST> ... link/ether 82:3a:78:ab:60:50 brd ff:ff:ff:ff:ff:ff ---After--- 12: ipvlan0@if11: <BROADCAST,MULTICAST> ... link/ether 42:b1:ad:57:4e:27 brd ff:ff:ff:ff:ff:ff link-netnsid 0 ~~~~~~~~~~~~~~ Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-16 08:50:59 +0000