summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2011-05-24libceph: handle new osdmap down/state change encodingSage Weil1-3/+8
Old incrementals encode a 0 value (nearly always) when an osd goes down. Change that to allow any state bit(s) to be flipped. Special case 0 to mean flip the CEPH_OSD_UP bit to mimic the old behavior. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-24rbd: handle online resize of underlying rbd imageSage Weil1-0/+3
If we get a notification that the image header has changed, check for a change in the image size. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-24ceph: avoid inode lookup on nfs fh reconnectSage Weil1-2/+6
If we get the inode from the MDS, we have a reference in req; don't do a fresh lookup. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-24ceph: use LOOKUPINO to make unconnected nfs fh more reliableSage Weil2-2/+18
If we are unable to locate an inode by ino, ask the MDS using the new LOOKUPINO command. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-24rbd: use snprintf for disk->disk_nameSage Weil1-1/+2
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-24rbd: cleanup: make kfree match kmallocSage Weil1-7/+7
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19rbd: warn on update_snaps failure on notifySage Weil1-1/+6
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19ceph: check return value for start_request in writepagesSage Weil2-2/+9
Since we pass the nofail arg, we should never get an error; BUG if we do. (And fix the function to not return an error if __map_request fails.) Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19ceph: remove useless checkSage Weil1-2/+0
rc is only ever 0 or negative in this method. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19libceph: add missing breaks in addr_set_portSage Weil1-0/+2
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19libceph: fix TAG_WAIT caseSage Weil1-1/+3
If we get a WAIT as a client something went wrong; error out. And don't fall through to an unrelated case. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19ceph: fix broken comparison in readdir loopSage Weil1-1/+1
Both off and fi->offset are unsigned, so the difference is always >= 0. Compare them directly instead of the sign of the difference. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19libceph: fix osdmap timestamp assignmentSage Weil1-1/+1
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19ceph: fix rare potential cap leakSage Weil1-1/+2
If we grab new_cap, retake the lock, and find we already have a cap now for the given mds, release new_cap. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19libceph: use snprintf for unknown addrsSage Weil1-1/+2
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19libceph: use snprintf for formatting object nameSage Weil1-1/+1
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19ceph: use snprintf for dirstat contentSage Weil1-2/+3
We allocate a buffer for rstats if the dirstat option is enabled. Use snprintf. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19libceph: fix uninitialized value when no get_authorizer method is setSage Weil1-5/+6
If there is no get_authorizer method we set the out_kvec to a bogus pointer. The length is also zero in that case, so it doesn't much matter, but it's better not to add the empty item in the first place. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19libceph: remove unused variableSage Weil1-2/+0
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19libceph: handle connection reopen race with callbacksSage Weil1-13/+51
If a connection is closed and/or reopened (ceph_con_close, ceph_con_open) it can race with a callback. con_work does various state checks for closed or reopened sockets at the beginning, but drops con->mutex before making callbacks. We need to check for state bit changes after retaking the lock to ensure we restart con_work and execute those CLOSED/OPENING tests or else we may end up operating under stale assumptions. In Jim's case, this was causing 'bad tag' errors. There are four cases where we re-take the con->mutex inside con_work: catch them all and return EAGAIN from try_{read,write} so that we can restart con_work. Reported-by: Jim Schutt <jaschut@sandia.gov> Tested-by: Jim Schutt <jaschut@sandia.gov> Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19ceph: take reference on mds request r_unsafe_dirSage Weil1-0/+4
We put ourselves on an inode list for the parent directory of metadata operations so that an fsync on the directory will wait for metadata updates to commit to disk. We weren't holding a reference to that directory, however, and under certain workloads (fsstress in this case) the directory can go away. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-18Linux 2.6.39v2.6.39Linus Torvalds1-1/+1
2011-05-18Merge branch 'fixes' of ↵Linus Torvalds7-27/+96
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: configfs: Fix race between configfs_readdir() and configfs_d_iput() configfs: Don't try to d_delete() negative dentries. ocfs2/dlm: Target node death during resource migration leads to thread spin ocfs2: Skip mount recovery for hard-ro mounts ocfs2/cluster: Heartbeat mismatch message improved ocfs2/cluster: Increase the live threshold for global heartbeat ocfs2/dlm: Use negotiated o2dlm protocol version ocfs2: skip existing hole when removing the last extent_rec in punching-hole codes. ocfs2: Initialize data_ac (might be used uninitialized)
2011-05-18Merge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds22-46/+108
* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6: drivercore: revert addition of of_match to struct device of: fix race when matching drivers
2011-05-18Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds4-8/+6
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: MIPS: Kludge IP27 build for 2.6.39. MIPS: AR7: Fix GPIO register size for Titan variant. MIPS: Fix duplicate invocation of notify_die. MIPS: RB532: Fix iomap resource size miscalculation.
2011-05-18drivercore: revert addition of of_match to struct deviceGrant Likely22-50/+108
Commit b826291c, "drivercore/dt: add a match table pointer to struct device" added an of_match pointer to struct device to cache the of_match_table entry discovered at driver match time. This was unsafe because matching is not an atomic operation with probing a driver. If two or more drivers are attempted to be matched to a driver at the same time, then the cached matching entry pointer could get overwritten. This patch reverts the of_match cache pointer and reworks all users to call of_match_device() directly instead. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-18of: fix race when matching driversMilton Miller1-2/+6
If two drivers are probing devices at the same time, both will write their match table result to the dev->of_match cache at the same time. Only write the result if the device matches. In a thread titled "SBus devices sometimes detected, sometimes not", Meelis reported his SBus hme was not detected about 50% of the time. From the debug suggested by Grant it was obvious another driver matched some devices between the call to match the hme and the hme discovery failling. Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Milton Miller <miltonm@bga.com> [grant.likely: modified to only call of_match_device() once] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-18Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds25-43/+62
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: don't delay blk_run_queue_async scsi: remove performance regression due to async queue run blk-throttle: Use task_subsys_state() to determine a task's blkio_cgroup block: rescan partitions on invalidated devices on -ENOMEDIA too cdrom: always check_disk_change() on open block: unexport DISK_EVENT_MEDIA_CHANGE for legacy/fringe drivers
2011-05-18MIPS: Kludge IP27 build for 2.6.39.Ralf Baechle1-0/+2
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-18MIPS: AR7: Fix GPIO register size for Titan variant.Florian Fainelli1-3/+1
The 'size' variable contains the correct register size for both AR7 and Titan, but we never used it to ioremap the correct register size. This problem only shows up on Titan. [ralf@linux-mips.org: Fixed the fix. The original patch as in patchwork recognizes the problem correctly then fails to fix it ...] Reported-by: Alexander Clouter <alex@digriz.org.uk> Signed-off-by: Florian Fainelli <florian@openwrt.org> Patchwork: https://patchwork.linux-mips.org/patch/2380/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-18MIPS: Fix duplicate invocation of notify_die.Ralf Baechle1-4/+2
Initial patch by Yury Polyanskiy <ypolyans@princeton.edu>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2373/
2011-05-18MIPS: RB532: Fix iomap resource size miscalculation.Ralf Baechle1-1/+1
This is the MIPS portion of Joe Perches <joe@perches.com>'s https://patchwork.linux-mips.org/patch/2172/ which seems to have been lost in time and space. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-18configfs: Fix race between configfs_readdir() and configfs_d_iput()Joel Becker1-5/+28
configfs_readdir() will use the existing inode numbers of inodes in the dcache, but it makes them up for attribute files that aren't currently instantiated. There is a race where a closing attribute file can be tearing down at the same time as configfs_readdir() is trying to get its inode number. We want to get the inode number of open attribute files, because they should match while instantiated. We can't lock down the transition where dentry->d_inode is set to NULL, so we just check for NULL there. We can, however, ensure that an inode we find isn't iput() in configfs_d_iput() until after we've accessed it. Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-05-18configfs: Don't try to d_delete() negative dentries.Joel Becker1-2/+4
When configfs is faking mkdir() on its subsystem or default group objects, it starts by adding a negative dentry. It then tries to instantiate the group. If that should fail, it must clean up after itself. I was using d_delete() here, but configfs_attach_group() promises to return an empty dentry on error. d_delete() explodes with the entry dentry. Let's try d_drop() instead. The unhashing is what we want for our dentry. Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-05-18block: don't delay blk_run_queue_asyncShaohua Li1-1/+3
Let's check a scenario: 1. blk_delay_queue(q, SCSI_QUEUE_DELAY); 2. blk_run_queue_async(); the second one will became a noop, because q->delay_work already has WORK_STRUCT_PENDING_BIT set, so the delayed work will still run after SCSI_QUEUE_DELAY. But blk_run_queue_async actually hopes the delayed work runs immediately. Fix this by doing a cancel on potentially pending delayed work before queuing an immediate run of the workqueue. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-18Merge branch 'v4l_for_linus' of ↵Linus Torvalds4-15/+54
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: [media] V4L: soc-camera: regression fix: calculate .sizeimage in soc_camera.c [media] v4l2-subdev: fix broken subdev control enumeration [media] Fix cx88 remote control input [media] v4l: Release module if subdev registration fails
2011-05-18Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds9-46/+147
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, AMD: Fix ARAT feature setting again Revert "x86, AMD: Fix APIC timer erratum 400 affecting K8 Rev.A-E processors" x86, apic: Fix spurious error interrupts triggering on all non-boot APs x86, mce, AMD: Fix leaving freed data in a list x86: Fix UV BAU for non-consecutive nasids x86, UV: Fix NMI handler for UV platforms
2011-05-18Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds7-56/+119
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf evlist: Fix per thread mmap setup perf tools: Honour the cpu list parameter when also monitoring a thread list kprobes, x86: Disable irqs during optimized callback
2011-05-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds2-8/+11
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: fix cifsConvertToUCS() for the mapchars case cifs: add fallback in is_path_accessible for old servers
2011-05-18procfs: add stub for proc_mkdir_mode()Randy Dunlap1-0/+2
Provide a stub for proc_mkdir_mode() when CONFIG_PROC_FS is not enabled, just like the stub for proc_mkdir(). Fixes this linux-next build error: drivers/net/wireless/airo.c:4504: error: implicit declaration of function 'proc_mkdir_mode' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-18um: fix abortRichard Weinberger1-1/+22
os_dump_core() uses abort() to terminate UML in case of an fatal error. glibc's abort() calls raise(SIGABRT) which makes use of tgkill(). tgkill() has no effect within UML's kernel threads because they are not pthreads. As fallback abort() executes an invalid instruction to terminate the process. Therefore UML gets killed by SIGSEGV and leaves a ugly log entry in the host's kernel ring buffer. To get rid of this we use our own abort routine. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-18memcg: fix zone congestionKAMEZAWA Hiroyuki1-1/+1
ZONE_CONGESTED should be a state of global memory reclaim. If not, a busy memcg sets this and give unnecessary throttoling in wait_iff_congested() against memory recalim in other contexts. This makes system performance bad. I'll think about "memcg is congested!" flag is required or not, later. But this fix is required first. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: Ying Han <yinghan@google.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Johannes Weiner <jweiner@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-18drivers/leds/leds-lm3530.c: add MODULE_DEVICE_TABLEAxel Lin1-0/+1
Adding the necessary MODULE_DEVICE_TABLE() information allows the driver to be automatically loaded by udev. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-18rapidio: fix default routing initializationAlexandre Bounine3-0/+21
Fix switch initialization to ensure that all switches have default routing disabled. This guarantees that no unexpected RapidIO packets arrive to the default port set by reset and there is no default routing destination until it is properly configured by software. This update also unifies handling of unmapped destinations by tsi57x, IDT Gen1 and IDT Gen2 switches. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: <stable@kernel.org> [2.6.37+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-17cifs: fix cifsConvertToUCS() for the mapchars caseJeff Layton1-8/+6
As Metze pointed out, commit 84cdf74e broke mapchars option: Commit "cifs: fix unaligned accesses in cifsConvertToUCS" (84cdf74e8096a10dd6acbb870dd404b92f07a756) does multiple steps in just one commit (moving the function and changing it without testing). put_unaligned_le16(temp, &target[j]); is never called for any codepoint the goes via the 'default' switch statement. As a result we put just zero (or maybe uninitialized) bytes into the target buffer. His proposed patch looks correct, but doesn't apply to the current head of the tree. This patch should also fix it. Cc: <stable@kernel.org> # .38.x: 581ade4: cifs: clean up various nits in unicode routines (try #2) Reported-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-17cifs: add fallback in is_path_accessible for old serversJeff Layton1-0/+5
The is_path_accessible check uses a QPathInfo call, which isn't supported by ancient win9x era servers. Fall back to an older SMBQueryInfo call if it fails with the magic error codes. Cc: stable@kernel.org Reported-and-Tested-by: Sandro Bonazzola <sandro.bonazzola@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-17Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds13-29/+53
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tick: Clear broadcast active bit when switching to oneshot rtc: mc13xxx: Don't call rtc_device_register while holding lock rtc: rp5c01: Initialize drvdata before registering device rtc: pcap: Initialize drvdata before registering device rtc: msm6242: Initialize drvdata before registering device rtc: max8998: Initialize drvdata before registering device rtc: max8925: Initialize drvdata before registering device rtc: m41t80: Initialize clientdata before registering device rtc: ds1286: Initialize drvdata before registering device rtc: ep93xx: Initialize drvdata before registering device rtc: davinci: Initialize drvdata before registering device rtc: mxc: Initialize drvdata before registering device clocksource: Install completely before selecting
2011-05-17x86, AMD: Fix ARAT feature setting againBorislav Petkov1-1/+1
Trying to enable the local APIC timer on early K8 revisions uncovers a number of other issues with it, in conjunction with the C1E enter path on AMD. Fixing those causes much more churn and troubles than the benefit of using that timer brings so don't enable it on K8 at all, falling back to the original functionality the kernel had wrt to that. Reported-and-bisected-by: Nick Bowler <nbowler@elliptictech.com> Cc: Boris Ostrovsky <Boris.Ostrovsky@amd.com> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Hans Rosenfeld <hans.rosenfeld@amd.com> Cc: Nick Bowler <nbowler@elliptictech.com> Cc: Joerg-Volker-Peetz <jvpeetz@web.de> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Link: http://lkml.kernel.org/r/1305636919-31165-3-git-send-email-bp@amd64.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-17Revert "x86, AMD: Fix APIC timer erratum 400 affecting K8 Rev.A-E processors"Borislav Petkov1-1/+1
This reverts commit e20a2d205c05cef6b5783df339a7d54adeb50962, as it crashes certain boxes with specific AMD CPU models. Moving the lower endpoint of the Erratum 400 check to accomodate earlier K8 revisions (A-E) opens a can of worms which is simply not worth to fix properly by tweaking the errata checking framework: * missing IntPenging MSR on revisions < CG cause #GP: http://marc.info/?l=linux-kernel&m=130541471818831 * makes earlier revisions use the LAPIC timer instead of the C1E idle routine which switches to HPET, thus not waking up in deeper C-states: http://lkml.org/lkml/2011/4/24/20 Therefore, leave the original boundary starting with K8-revF. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-17scsi: remove performance regression due to async queue runJens Axboe3-4/+19
Commit c21e6beb removed our queue request_fn re-enter protection, and defaulted to always running the queues from kblockd to be safe. This was a known potential slow down, but should be safe. Unfortunately this is causing big performance regressions for some, so we need to improve this logic. Looking into the details of the re-enter, the real issue is on requeue of requests. Requeue of requests upon seeing a BUSY condition from the device ends up re-running the queue, causing traces like this: scsi_request_fn() scsi_dispatch_cmd() scsi_queue_insert() __scsi_queue_insert() scsi_run_queue() scsi_request_fn() ... potentially causing the issue we want to avoid. So special case the requeue re-run of the queue, but improve it to offload the entire run of local queue and starved queue from a single workqueue callback. This is a lot better than potentially kicking off a workqueue run for each device seen. This also fixes the issue of the local device going into recursion, since the above mentioned commit never moved that queue run out of line. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 22:11:31 +0000