summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-04-24ipv4/fib: don't warn when primary address is missing if in_dev is deadPaolo Abeni1-1/+5
After commit fbd40ea0180a ("ipv4: Don't do expensive useless work during inetdev destroy.") when deleting an interface, fib_del_ifaddr() can be executed without any primary address present on the dead interface. The above is safe, but triggers some "bug: prim == NULL" warnings. This commit avoids warning if the in_dev is dead Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24Merge branch 'mlx5-fixes'David S. Miller11-67/+157
Saeed Mahameed says: ==================== mlx5 driver updates and fixes Changes from V0: - Dropped: ("net/mlx5e: Reset link modes upon setting speed to zero") - Fixed compilation issue introduced to mlx5_ib driver. - Rebased to df637193906a ('Revert "Prevent NUll pointer dereference with two PHYs on cpsw"') This series has few bug fixes for mlx5 core and ethernet driver. Eli fixed a wrong static local variable declaration in flow steering API. Majd added the support of ConnectX-5 PF and VF and added the support for kernel shutdown pci callback for more robust reboot procedures. Maor fixed a soft lockup in flow steering. Rana fixed a wrog speed define in mlx5 EN driver. I also had the chance to introduce some bug fixes in mlx5 EN mtu reporting and handling. For -stable: net/mlx5_core: Fix soft lockup in steering error flow net/mlx5e: Device's mtu field is u16 and not int net/mlx5e: Fix minimum MTU net/mlx5e: Use vport MTU rather than physical port MTU ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24net/mlx5: Add pci shutdown callbackMajd Dibbiny3-9/+36
This patch introduces kexec support for mlx5. When switching kernels, kexec() calls shutdown, which unloads the driver and cleans its resources. In addition, remove unregister netdev from shutdown flow. This will allow a clean shutdown, even if some netdev clients did not release their reference from this netdev. Releasing The HW resources only is enough as the kernel is shutting down Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Haggai Abramovsky <hagaya@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24net/mlx5_core: Remove static from local variableEli Cohen1-1/+1
The static is not required and breaks re-entrancy if it will be required. Fixes: 2530236303d9 ("net/mlx5_core: Flow steering tree initialization") Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24net/mlx5e: Use vport MTU rather than physical port MTUSaeed Mahameed3-9/+77
Set and report vport MTU rather than physical MTU, Driver will set both vport and physical port mtu and will rely on the query of vport mtu. SRIOV VFs have to report their MTU to their vport manager (PF), and this will allow them to work with any MTU they need without failing the request. Also for some cases where the PF is not a port owner, PF can work with MTU less than the physical port mtu if set physical port mtu didn't take effect. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24net/mlx5e: Fix minimum MTUSaeed Mahameed1-3/+8
Minimum MTU that can be set in Connectx4 device is 68. This fixes the case where a user wants to set invalid MTU, the driver will fail to satisfy this request and the interface will stay down. It is better to report an error and continue working with old mtu. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24net/mlx5e: Device's mtu field is u16 and not intSaeed Mahameed4-12/+12
For set/query MTU port firmware commands the MTU field is 16 bits, here I changed all the "int mtu" parameters of the functions wrapping those firmware commands to be u16. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24net/mlx5_core: Add ConnectX-5 to list of supported devicesMajd Dibbiny1-0/+2
Add the upcoming ConnectX-5 devices (PF and VF) to the list of supported devices by the mlx5 driver. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24net/mlx5e: Fix MLX5E_100BASE_T defineRana Shahout2-5/+5
Bit 25 of eth_proto_capability in PTYS register is 1000Base-TT and not 100Base-T. Fixes: f62b8bb8f2d3 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Rana Shahout <ranas@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24net/mlx5_core: Fix soft lockup in steering error flowMaor Gottlieb1-29/+17
In the error flow of adding flow rule to auto-grouped flow table, we call to tree_remove_node. tree_remove_node locks the node's parent, however the node's parent is already locked by mlx5_add_flow_rule and this causes a deadlock. After this patch, if we failed to add the flow rule, we unlock the flow table before calling to tree_remove_node. fixes: f0d22d187473 ('net/mlx5_core: Introduce flow steering autogrouped flow table') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reported-by: Amir Vadai <amir@vadai.me> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24qlcnic: Update version to 5.3.64Manish Chopra1-2/+2
Just updating the version as many fixes got accumulated over 5.3.63 Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24net: stmmac: socfpga: Remove re-registration of reset controllerMarek Vasut1-34/+16
Both socfpga_dwmac_parse_data() in dwmac-socfpga.c and stmmac_dvr_probe() in stmmac_main.c functions call devm_reset_control_get() to register an reset controller for the stmmac. This results in an attempt to register two reset controllers for the same non-shared reset line. The first attempt to register the reset controller works fine. The second attempt fails with warning from the reset controller core, see below. The warning is produced because the reset line is non-shared and thus it is allowed to have only up-to one reset controller associated with that reset line, not two or more. The solution has multiple parts. First, the original socfpga_dwmac_init() is tweaked to use reset controller pointer from the stmmac_priv (private data of the stmmac core) instead of the local instance, which was used before. The local re-registration of the reset controller is removed. Next, the socfpga_dwmac_init() is moved after stmmac_dvr_probe() in the probe function. This order is legal according to Altera and it makes the code much easier, since there is no need to temporarily register and unregister the reset controller ; the reset controller is already registered by the stmmac_dvr_probe(). Finally, plat_dat->exit and socfpga_dwmac_exit() is no longer necessary, since the functionality is already performed by the stmmac core. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/reset/core.c:187 __of_reset_control_get+0x218/0x270 Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc4-next-20160419-00015-gabb2477-dirty #4 Hardware name: Altera SOCFPGA [<c010f290>] (unwind_backtrace) from [<c010b82c>] (show_stack+0x10/0x14) [<c010b82c>] (show_stack) from [<c0373da4>] (dump_stack+0x94/0xa8) [<c0373da4>] (dump_stack) from [<c011bcc0>] (__warn+0xec/0x104) [<c011bcc0>] (__warn) from [<c011bd88>] (warn_slowpath_null+0x20/0x28) [<c011bd88>] (warn_slowpath_null) from [<c03a6eb4>] (__of_reset_control_get+0x218/0x270) [<c03a6eb4>] (__of_reset_control_get) from [<c03a701c>] (__devm_reset_control_get+0x54/0x90) [<c03a701c>] (__devm_reset_control_get) from [<c041fa30>] (stmmac_dvr_probe+0x1b4/0x8e8) [<c041fa30>] (stmmac_dvr_probe) from [<c04298c8>] (socfpga_dwmac_probe+0x1b8/0x28c) [<c04298c8>] (socfpga_dwmac_probe) from [<c03d6ffc>] (platform_drv_probe+0x4c/0xb0) [<c03d6ffc>] (platform_drv_probe) from [<c03d54ec>] (driver_probe_device+0x224/0x2bc) [<c03d54ec>] (driver_probe_device) from [<c03d5630>] (__driver_attach+0xac/0xb0) [<c03d5630>] (__driver_attach) from [<c03d382c>] (bus_for_each_dev+0x6c/0xa0) [<c03d382c>] (bus_for_each_dev) from [<c03d4ad4>] (bus_add_driver+0x1a4/0x21c) [<c03d4ad4>] (bus_add_driver) from [<c03d60ac>] (driver_register+0x78/0xf8) [<c03d60ac>] (driver_register) from [<c0101760>] (do_one_initcall+0x40/0x170) [<c0101760>] (do_one_initcall) from [<c0800e38>] (kernel_init_freeable+0x1dc/0x27c) [<c0800e38>] (kernel_init_freeable) from [<c05d1bd4>] (kernel_init+0x8/0x114) [<c05d1bd4>] (kernel_init) from [<c01076f8>] (ret_from_fork+0x14/0x3c) ---[ end trace 059d2fbe87608fa9 ]--- Signed-off-by: Marek Vasut <marex@denx.de> Cc: Matthew Gerlach <mgerlach@opensource.altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: David S. Miller <davem@davemloft.net> Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24Merge branch 'macsec-fixes'David S. Miller2-25/+44
Sabrina Dubroca says: ==================== macsec: a few fixes Some small fixes for the macsec driver: - possible NULL pointer dereferences - netlink dumps fixes: RTNL locking, consistent dumps - a reference counting bug - wrong name for uapi constant - a few memory leaks Patches 1 to 5 are the same as in v1, patches 6 to 9 are new. Patch 6 fixes the memleak that Lance spotted in v1. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24macsec: fix netlink attribute validationSabrina Dubroca1-2/+2
macsec_validate_attr should check IFLA_MACSEC_REPLAY_PROTECT (not IFLA_MACSEC_PROTECT) to verify that the replay protection and replay window arguments are correct. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24macsec: add missing macsec prefix in uapiSabrina Dubroca2-7/+9
I accidentally forgot some MACSEC_ prefixes in if_macsec.h. Fixes: dece8d2b78d1 ("uapi: add MACsec bits") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24macsec: fix SA leak if initialization failsSabrina Dubroca1-0/+2
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: Lance Richardson <lrichard@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24macsec: fix memory leaks around rx_handler (un)registrationSabrina Dubroca1-2/+6
We leak a struct macsec_rxh_data when we unregister the rx_handler in macsec_dellink. We also leak a struct macsec_rxh_data in register_macsec_dev if we fail to register the rx_handler. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24macsec: add consistency check to netlink dumpsSabrina Dubroca1-0/+11
Use genl_dump_check_consistent in dump_secy. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24macsec: fix rx_sa refcounting with decrypt callbackSabrina Dubroca1-7/+9
The decrypt callback macsec_decrypt_done needs a reference on the rx_sa and releases it before returning, but macsec_handle_frame already put that reference after macsec_decrypt returned NULL. Set rx_sa to NULL when the decrypt callback runs so that macsec_handle_frame knows it must not release the reference. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24macsec: don't put a NULL rxsaSabrina Dubroca1-1/+2
The "deliver:" path of macsec_handle_frame can be called with rx_sa == NULL. Check rx_sa != NULL before calling macsec_rxsa_put(). Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24macsec: take rtnl lock before for_each_netdevSabrina Dubroca1-5/+2
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24macsec: add missing NULL check after kmallocSabrina Dubroca1-2/+2
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24Merge branch 'bridge-mdb-fixes'David S. Miller5-50/+96
Jiri Pirko says: ==================== bridge: mdb: Couple of fixes Elad says: This patchset fixes two problems reported by Nikolay Aleksandrov. The first problem is that the MDB offload flag might be accesed without helding the multicast_lock. The second problem is that the switchdev mdb offload is deferred and the offload bit was marked regardless if the operation succeeded or not. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24bridge: mdb: Marking port-group as offloadedElad Raz3-32/+71
There is a race-condition when updating the mdb offload flag without using the mulicast_lock. This reverts commit 9e8430f8d60d98 ("bridge: mdb: Passing the port-group pointer to br_mdb module"). This patch marks offloaded MDB entry as "offload" by changing the port- group flags and marks it as MDB_PG_FLAGS_OFFLOAD. When switchdev PORT_MDB succeeded and adds a multicast group, a completion callback is been invoked "br_mdb_complete". The completion function locks the multicast_lock and finds the right net_bridge_port_group and marks it as offloaded. Fixes: 9e8430f8d60d98 ("bridge: mdb: Passing the port-group pointer to br_mdb module") Reported-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24bridge: mdb: Common function for mdb entry translationElad Raz1-18/+15
There is duplicate code that translates br_mdb_entry to br_ip let's wrap it in a common function. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24switchdev: Adding complete operation to deferred switchdev opsElad Raz2-0/+10
When using switchdev deferred operation (SWITCHDEV_F_DEFER), the operation is executed in different context and the application doesn't have any way to get the operation real status. Adding a completion callback fixes that. This patch adds fields to switchdev_attr and switchdev_obj "complete_priv" field which is used by the "complete" callback. Application can set a complete function which will be called once the operation executed. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24MAINTAINERS: net: add entry for TI Ethernet Switch driversGrygorii Strashko1-0/+9
Add record for TI Ethernet Switch Driver CPSW/CPDMA/MDIO HW (am33/am43/am57/dr7/davinci) to ensure that related patches will go through dedicated linux-omap list. Also add Mugunthan as maintainer and myself as the reviewer. Cc: "David S. Miller" <davem@davemloft.net> Cc: Tony Lindgren <tony@atomide.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21Merge tag 'rtc-4.6-3' of ↵Linus Torvalds2-6/+7
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fixes from Alexandre Belloni: "A few fixes for the RTC subsystem. The documentation fix already missed 4.5 so I think it is worth taking it now: A documentation fix for s3c and two fixes for the ds1307" * tag 'rtc-4.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: ds1307: Use irq when available for wakeup-source device rtc: ds1307: ds3231 temperature s16 overflow rtc: s3c: Document in binding that only s3c6410 needs a src clk
2016-04-21Merge tag 'pm+acpi-4.6-rc5' of ↵Linus Torvalds2-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Two fixes for issues introduced recently, one for an intel_pstate driver problem uncovered by the recent switch over from using timers and the other one for a potential cpufreq core problem related to system suspend/resume. Specifics: - Fix an intel_pstate driver problem causing CPUs to get stuck in the highest P-state when completely idle uncovered by the recent switch over from using timers (Rafael Wysocki). - Avoid attempts to get the current CPU frequency when all devices (like I2C controllers that may be nedded for that purpose) have been suspended during system suspend/resume (Rafael Wysocki)" * tag 'pm+acpi-4.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Abort cpufreq_update_current_freq() for cpufreq_suspended set intel_pstate: Avoid getting stuck in high P-states when idle
2016-04-21rtc: ds1307: Use irq when available for wakeup-source deviceNishanth Menon1-1/+1
With commit 8bc2a40730ec ("rtc: ds1307: add support for the DT property 'wakeup-source'") we lost the ability for rtc irq functionality for devices that are actually hooked on a real IRQ line and have capability to wakeup as well. This is not an expected behavior. So, instead of just not requesting IRQ, skip the IRQ requirement only if interrupts are not defined for the device. Fixes: 8bc2a40730ec ("rtc: ds1307: add support for the DT property 'wakeup-source'") Reported-by: Tony Lindgren <tony@atomide.com> Cc: Michael Lange <linuxstuff@milaw.biz> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-04-21rtc: ds1307: ds3231 temperature s16 overflowZhuang Yuyao1-2/+2
while retrieving temperature from ds3231, the result may be overflow since s16 is too small for a multiplication with 250. ie. if temp_buf[0] == 0x2d, the result (s16 temp) will be negative. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Tested-by: Michael Tatarinov <kukabu@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds84-529/+1009
Pull networking fixes from David Miller: 1) Fix memory leak in iwlwifi, from Matti Gottlieb. 2) Add missing registration of netfilter arp_tables into initial namespace, from Florian Westphal. 3) Fix potential NULL deref in DecNET routing code. 4) Restrict NETLINK_URELEASE to truly bound sockets only, from Dmitry Ivanov. 5) Fix dst ref counting in VRF, from David Ahern. 6) Fix TSO segmenting limits in i40e driver, from Alexander Duyck. 7) Fix heap leak in PACKET_DIAG_MCLIST, from Mathias Krause. 8) Ravalidate IPV6 datagram socket cached routes properly, particularly with UDP, from Martin KaFai Lau. 9) Fix endian bug in RDS dp_ack_seq handling, from Qing Huang. 10) Fix stats typing in bcmgenet driver, from Eric Dumazet. 11) Openvswitch needs to orphan SKBs before ipv6 fragmentation handing, from Joe Stringer. 12) SPI device reference leak in spi_ks8895 PHY driver, from Mark Brown. 13) atl2 doesn't actually support scatter-gather, so don't advertise the feature. From Ben Hucthings. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits) openvswitch: use flow protocol when recalculating ipv6 checksums Driver: Vmxnet3: set CHECKSUM_UNNECESSARY for IPv6 packets atl2: Disable unimplemented scatter/gather feature net/mlx4_en: Split SW RX dropped counter per RX ring net/mlx4_core: Don't allow to VF change global pause settings net/mlx4_core: Avoid repeated calls to pci enable/disable net/mlx4_core: Implement pci_resume callback net: phy: spi_ks8895: Don't leak references to SPI devices net: ethernet: davinci_emac: Fix platform_data overwrite net: ethernet: davinci_emac: Fix Unbalanced pm_runtime_enable qede: Fix single MTU sized packet from firmware GRO flow qede: Fix setting Skb network header qede: Fix various memory allocation error flows for fastpath tcp: Merge tx_flags and tskey in tcp_shifted_skb tcp: Merge tx_flags and tskey in tcp_collapse_retrans drivers: net: cpsw: fix wrong regs access in cpsw_ndo_open tcp: Fix SOF_TIMESTAMPING_TX_ACK when handling dup acks openvswitch: Orphan skbs before IPv6 defrag Revert "Prevent NUll pointer dereference with two PHYs on cpsw" VSOCK: Only check error on skb_recv_datagram when skb is NULL ...
2016-04-21openvswitch: use flow protocol when recalculating ipv6 checksumsSimon Horman1-2/+2
When using masked actions the ipv6_proto field of an action to set IPv6 fields may be zero rather than the prevailing protocol which will result in skipping checksum recalculation. This patch resolves the problem by relying on the protocol in the flow key rather than that in the set field action. Fixes: 83d2b9ba1abc ("net: openvswitch: Support masked set actions.") Cc: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21Driver: Vmxnet3: set CHECKSUM_UNNECESSARY for IPv6 packetsShrikrishna Khare2-6/+10
For IPv6, if the device indicates that the checksum is correct, set CHECKSUM_UNNECESSARY. Reported-by: Subbarao Narahari <snarahari@vmware.com> Signed-off-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: Jin Heo <heoj@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21atl2: Disable unimplemented scatter/gather featureBen Hutchings1-1/+1
atl2 includes NETIF_F_SG in hw_features even though it has no support for non-linear skbs. This bug was originally harmless since the driver does not claim to implement checksum offload and that used to be a requirement for SG. Now that SG and checksum offload are independent features, if you explicitly enable SG *and* use one of the rare protocols that can use SG without checkusm offload, this potentially leaks sensitive information (before you notice that it just isn't working). Therefore this obscure bug has been designated CVE-2016-2117. Reported-by: Justin Yackoski <jyackoski@crypto-nite.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Fixes: ec5f06156423 ("net: Kill link between CSUM and SG features.") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21Merge branch 'mlx4-fixes'David S. Miller8-22/+89
Or Gerlitz says: ==================== Mellaox 40G driver fixes for 4.6-rc With the fix for ARM bug being under the works, these are few other fixes for mlx4 we have ready to go. Eran addressed the problematic/wrong reporting of dropped packets, Daniel fixed some matters related to PPC EEH's and Jenny's patch makes sure VFs can't change the port's pause settings. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net/mlx4_en: Split SW RX dropped counter per RX ringEran Ben Elisha4-3/+10
Count SW packet drops per RX ring instead of a global counter. This will allow monitoring the number of rx drops per ring. In addition, SW rx_dropped counter was overwritten by HW rx_dropped counter, sum both of them instead to show the accurate value. Fixes: a3333b35da16 ('net/mlx4_en: Moderate ethtool callback to [...] ') Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reported-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net/mlx4_core: Don't allow to VF change global pause settingsEugenia Emantayev2-0/+15
Currently changing global pause settings is done via SET_PORT command with input modifier GENERAL. This command is allowed for each VF since MTU setting is done via the same command. Change the above to the following scheme: before passing the request to the FW, the PF will check whether it was issued by a slave. If yes, don't change global pause and warn, otherwise change to the requested value and store for further reference. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net/mlx4_core: Avoid repeated calls to pci enable/disableDaniel Jurgens2-5/+41
Maintain the PCI status and provide wrappers for enabling and disabling the PCI device. Performing the actions more than once without doing its opposite results in warning logs. This occurred when EEH hotplugged the device causing a warning for disabling an already disabled device. Fixes: 2ba5fbd62b25 ('net/mlx4_core: Handle AER flow properly') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net/mlx4_core: Implement pci_resume callbackDaniel Jurgens1-15/+24
Move resume related activities to a new pci_resume function instead of performing them in mlx4_pci_slot_reset. This change is needed to avoid a hotplug during EEH recovery due to commit f2da4ccf8bd4 ("powerpc/eeh: More relaxed hotplug criterion"). Fixes: 2ba5fbd62b25 ('net/mlx4_core: Handle AER flow properly') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net: phy: spi_ks8895: Don't leak references to SPI devicesMark Brown1-1/+1
The ks8895 driver is using spi_dev_get() apparently just to take a copy of the SPI device used to instantiate it but never calls spi_dev_put() to free it. Since the device is guaranteed to exist between probe() and remove() there should be no need for the driver to take an extra reference to it so fix the leak by just using a straight assignment. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net: ethernet: davinci_emac: Fix platform_data overwriteNeil Armstrong1-2/+0
When the DaVinci emac driver is removed and re-probed, the actual pdev->dev.platform_data is populated with an unwanted valid pointer saved by the previous davinci_emac_of_get_pdata() call, causing a kernel crash when calling priv->int_disable() in emac_int_disable(). Unable to handle kernel paging request at virtual address c8622a80 ... [<c0426fb4>] (emac_int_disable) from [<c0427700>] (emac_dev_open+0x290/0x5f8) [<c0427700>] (emac_dev_open) from [<c04c00ec>] (__dev_open+0xb8/0x120) [<c04c00ec>] (__dev_open) from [<c04c0370>] (__dev_change_flags+0x88/0x14c) [<c04c0370>] (__dev_change_flags) from [<c04c044c>] (dev_change_flags+0x18/0x48) [<c04c044c>] (dev_change_flags) from [<c052bafc>] (devinet_ioctl+0x6b4/0x7ac) [<c052bafc>] (devinet_ioctl) from [<c04a1428>] (sock_ioctl+0x1d8/0x2c0) [<c04a1428>] (sock_ioctl) from [<c014f054>] (do_vfs_ioctl+0x41c/0x600) [<c014f054>] (do_vfs_ioctl) from [<c014f2a4>] (SyS_ioctl+0x6c/0x7c) [<c014f2a4>] (SyS_ioctl) from [<c000ff60>] (ret_fast_syscall+0x0/0x1c) Fixes: 42f59967a091 ("net: ethernet: davinci_emac: add OF support") Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net: ethernet: davinci_emac: Fix Unbalanced pm_runtime_enableNeil Armstrong1-0/+1
In order to avoid an Unbalanced pm_runtime_enable in the DaVinci emac driver when the device is removed and re-probed, and a pm_runtime_disable() call in davinci_emac_remove(). Actually, using unbind/bind on a TI DM8168 SoC gives : $ echo 4a120000.ethernet > /sys/bus/platform/drivers/davinci_emac/unbind net eth1: DaVinci EMAC: davinci_emac_remove() $ echo 4a120000.ethernet > /sys/bus/platform/drivers/davinci_emac/bind davinci_emac 4a120000.ethernet: Unbalanced pm_runtime_enable Cc: Brian Hutchinson <b.hutchman@gmail.com> Fixes: 3ba97381343b ("net: ethernet: davinci_emac: add pm_runtime support") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21Merge branch 'pm-cpufreq-fixes'Rafael J. Wysocki2-0/+7
* pm-cpufreq-fixes: cpufreq: Abort cpufreq_update_current_freq() for cpufreq_suspended set intel_pstate: Avoid getting stuck in high P-states when idle
2016-04-21Merge branch 'qed-fixes'David S. Miller1-57/+100
Manish Chopra says: ==================== qede: Bug fixes This series fixes - * various memory allocation failure flows for fastpath * issues with respect to driver GRO packets handling V1->V2 * Send series against net instead of net-next. Please consider applying this series to "net" ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21qede: Fix single MTU sized packet from firmware GRO flowManish Chopra1-0/+13
In firmware assisted GRO flow there could be a single MTU sized segment arriving due to firmware aggregation timeout/last segment in an aggregation flow, which is not expected to be an actual gro packet. So If a skb has zero frags from the GRO flow then simply push it in the stack as non gso skb. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21qede: Fix setting Skb network headerManish Chopra1-2/+2
Skb's network header needs to be set before extracting IPv4/IPv6 headers from it. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21qede: Fix various memory allocation error flows for fastpathManish Chopra1-55/+85
This patch handles memory allocation failures for fastpath gracefully in the driver. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21Merge branch 'tcp-coalesce-merge-timestamps'David S. Miller3-0/+19
Martin KaFai Lau says: ==================== tcp: Merge timestamp info when coalescing skbs This series is separated from the RFC series related to tcp_sendmsg(MSG_EOR) and it is targeting for the net branch. This patchset is focusing on fixing cases where TCP timestamp could be lost after coalescing skbs. A BPF prog is used to kprobe to sock_queue_err_skb() and print out the value of serr->ee.ee_data. The BPF prog (run-able from bcc) is attached here: BPF prog used for testing: ~~~~~ from __future__ import print_function from bcc import BPF bpf_text = """ int trace_err_skb(struct pt_regs *ctx) { struct sk_buff *skb = (struct sk_buff *)ctx->si; struct sock *sk = (struct sock *)ctx->di; struct sock_exterr_skb *serr; u32 ee_data = 0; if (!sk || !skb) return 0; serr = SKB_EXT_ERR(skb); bpf_probe_read(&ee_data, sizeof(ee_data), &serr->ee.ee_data); bpf_trace_printk("ee_data:%u\\n", ee_data); return 0; }; """ b = BPF(text=bpf_text) b.attach_kprobe(event="sock_queue_err_skb", fn_name="trace_err_skb") print("Attached to kprobe") b.trace_print() ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21tcp: Merge tx_flags and tskey in tcp_shifted_skbMartin KaFai Lau3-2/+5
After receiving sacks, tcp_shifted_skb() will collapse skbs if possible. tx_flags and tskey also have to be merged. This patch reuses the tcp_skb_collapse_tstamp() to handle them. BPF Output Before: ~~~~~ <no-output-due-to-missing-tstamp-event> BPF Output After: ~~~~~ <...>-2024 [007] d.s. 88.644374: : ee_data:14599 Packetdrill Script: ~~~~~ +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10` +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1` +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7> 0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0 0.200 write(4, ..., 1460) = 1460 +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0 0.200 write(4, ..., 13140) = 13140 0.200 > P. 1:1461(1460) ack 1 0.200 > . 1461:8761(7300) ack 1 0.200 > P. 8761:14601(5840) ack 1 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:14601,nop,nop> 0.300 > P. 1:1461(1460) ack 1 0.400 < . 1:1(0) ack 14601 win 257 0.400 close(4) = 0 0.400 > F. 14601:14601(0) ack 1 0.500 < F. 1:1(0) ack 14602 win 257 0.500 > . 14602:14602(0) ack 2 Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Tested-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 11:16:14 +0000