summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-05-14cifs:smbd When reconnecting to server, call smbd_destroy() after all MIDs ↵Long Li1-17/+20
have been called commit 214bab448476 ("cifs: Call MID callback before destroying transport") assumes that the MID callback should not take srv_mutex, this may not always be true. SMB Direct requires the MID callback completed before calling transport so all pending memory registration can be freed. So restore the original calling sequence so TCP transport will use the same code, but moving smbd_destroy() after all MID has been called. fixes: 214bab448476 ("cifs: Call MID callback before destroying transport") Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-05-12cifs: use the right include for signal_pending()Ronnie Sahlberg1-1/+1
This header is actually where signal_pending is defined although either would work. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-05-09smb3: trivial cleanup to smb2ops.cSteve French1-1/+1
Minor cleanup - e.g. missing \n at end of debug statement. Reported-by: Christoph Probst <kernel@probst.it> Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-05-09cifs: cleanup smb2ops.c and normalize stringsChristoph Probst1-22/+22
Fix checkpatch warnings/errors in smb2ops.c except "LONG_LINE". Add missing linebreaks, indentings, __func__. Remove void-returns, unneeded braces. Address warnings spotted by checkpatch. Add SPDX License Header. Add missing "\n" and capitalize first letter in some cifs_dbg() strings. Signed-off-by: Christoph Probst <kernel@probst.it> Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-05-09smb3: display session id in debug dataSteve French1-0/+2
Displaying the session id in /proc/fs/cifs/DebugData is needed in order to correlate Linux client information with network and server traces for many common support scenarios. Turned out to be very important for debugging. Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-05-08Merge tag '5.2-smb3' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds21-2184/+2582
Pull cifs fixes from Steve French: "CIFS/SMB3 changes: - three fixes for stable - add fiemap support - improve zero-range support - various RDMA (smb direct fixes) I have an additional set of fixes (for improved handling of sparse files, mode bits, POSIX extensions) that are still being tested that are not included in this pull request but I expect to send in the next week" * tag '5.2-smb3' of git://git.samba.org/sfrench/cifs-2.6: (29 commits) cifs: update module internal version number SMB3: Clean up query symlink when reparse point cifs: fix strcat buffer overflow and reduce raciness in smb21_set_oplock_level() Negotiate and save preferred compression algorithms cifs: rename and clarify CIFS_ASYNC_OP and CIFS_NO_RESP cifs: fix credits leak for SMB1 oplock breaks smb3: Add protocol structs for change notify support cifs: fix smb3_zero_range for Azure cifs: zero-range does not require the file is sparse Add new flag on SMB3.1.1 read cifs: add fiemap support SMB3: Add defines for new negotiate contexts cifs: fix bi-directional fsctl passthrough calls cifs: smbd: take an array of reqeusts when sending upper layer data SMB3: Add handling for different FSCTL access flags cifs: Add support for FSCTL passthrough that write data to the server cifs: remove superfluous inode_lock in cifs_{strict_}fsync cifs: Call MID callback before destroying transport cifs: smbd: Retry on memory registration failure cifs: smbd: Indicate to retry on transport sending failure ...
2019-05-08Merge tag 'docs-5.2' of git://git.lwn.net/linuxLinus Torvalds99-1396/+6606
Pull documentation updates from Jonathan Corbet: "A reasonably busy cycle for docs, including: - Lots of work on the Chinese and Italian translations - Some license-rules clarifications from Christoph - Various build-script fixes - A new document on memory models - RST conversion of the live-patching docs - The usual collection of typo fixes and corrections" * tag 'docs-5.2' of git://git.lwn.net/linux: (140 commits) docs/livepatch: Unify style of livepatch documentation in the ReST format docs: livepatch: convert docs to ReST and rename to *.rst scripts/documentation-file-ref-check: detect broken :doc:`foo` scripts/documentation-file-ref-check: don't parse Next/ dir LICENSES: Rename other to deprecated LICENSES: Clearly mark dual license only licenses docs: Don't reference the ZLib license in license-rules.rst docs/vm: Minor editorial changes in the THP and hugetlbfs docs/vm: add documentation of memory models doc:it_IT: translation alignment doc: fix typo in PGP guide dontdiff: update with Kconfig build artifacts docs/zh_CN: fix typos in 1.Intro.rst file docs/zh_CN: redirect CoC docs to Chinese version doc: mm: migration doesn't use FOLL_SPLIT anymore docs: doc-guide: remove the extension from .rst files doc: kselftest: Fix KBUILD_OUTPUT usage instructions docs: trace: fix some Sphinx warnings docs: speculation.txt: mark example blocks as such docs: ntb.txt: add blank lines to clean up some Sphinx warnings ...
2019-05-08Merge tag 'kbuild-v5.2' of ↵Linus Torvalds25-124/+128
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - allow users to invoke 'make' out of the source tree - refactor scripts/mkmakefile - deprecate KBUILD_SRC, which was used to track the source tree location for O= build. - fix recordmcount.pl in case objdump output is localized - turn unresolved symbols in external modules to errors from warnings by default; pass KBUILD_MODPOST_WARN=1 to get them back to warnings - generate modules.builtin.modinfo to collect .modinfo data from built-in modules - misc Makefile cleanups * tag 'kbuild-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits) .gitignore: add more all*.config patterns moduleparam: Save information about built-in modules in separate file Remove MODULE_ALIAS() calls that take undefined macro .gitignore: add leading and trailing slashes to generated directories scripts/tags.sh: fix direct execution of scripts/tags.sh scripts: override locale from environment when running recordmcount.pl samples: kobject: allow CONFIG_SAMPLE_KOBJECT to become y samples: seccomp: turn CONFIG_SAMPLE_SECCOMP into a bool option kbuild: move Documentation to vmlinux-alldirs kbuild: move samples/ to KBUILD_VMLINUX_OBJS modpost: make KBUILD_MODPOST_WARN also configurable for external modules kbuild: check arch/$(SRCARCH)/include/generated before out-of-tree build kbuild: remove unneeded dependency for include/config/kernel.release memory: squash drivers/memory/Makefile.asm-offsets kbuild: use $(srctree) instead of KBUILD_SRC to check out-of-tree build kbuild: mkmakefile: generate a simple wrapper of top Makefile kbuild: mkmakefile: do not check the generated Makefile marker kbuild: allow Kbuild to start from any directory kbuild: pass $(MAKECMDGOALS) to sub-make as is kbuild: fix warning "overriding recipe for target 'Makefile'" ...
2019-05-08Merge tag 'nolibc-5.2-rc1' of ↵Linus Torvalds1-0/+194
git://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/nolibc Pull RISC-V nolibc header update from Willy Tarreau: "This single commit adds support for the RISCV architecture to the nolibc header file. Currently the file is only used by rcutorture but Pranith Kumar who contributed it would like to have this work merged. I only did some trivial tests to verify that it does not break x86, which I consider sufficient since all the code is cleanly enclosed inside a single #if/endif block" * tag 'nolibc-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/nolibc: tool headers nolibc: add RISCV support
2019-05-08Merge tag 'csky-for-linus-5.2-rc1' of git://github.com/c-sky/csky-linuxLinus Torvalds34-502/+890
Pull arch/csky updates from Guo Ren: - Fixup vdsp&fpu issues in kernel - Add dynamic function tracer - Use in_syscall & forget_syscall instead of r11_sig - Reconstruct signal processing - Support dynamic start physical address - Fixup wrong update_mmu_cache implementation - Support vmlinux bootup with MMU off - Use va_pa_offset instead of phys_offset - Fixup syscall_trace return processing flow - Add perf callchain support - Add perf_arch_fetch_caller_regs support - Add page fault perf event support - Add support for perf registers sampling * tag 'csky-for-linus-5.2-rc1' of git://github.com/c-sky/csky-linux: csky/syscall_trace: Fixup return processing flow csky: Fixup compile warning csky: Add support for perf registers sampling csky: add page fault perf event support csky: Use va_pa_offset instead of phys_offset csky: Support vmlinux bootup with MMU off csky: Add perf_arch_fetch_caller_regs support csky: Fixup wrong update_mmu_cache implementation csky: Support dynamic start physical address csky: Reconstruct signal processing csky: Use in_syscall & forget_syscall instead of r11_sig csky: Add non-uapi asm/ptrace.h namespace csky: mm/fault.c: Remove duplicate header csky: remove redundant generic-y csky: Update syscall_trace_enter/exit implementation csky: Add perf callchain support csky/ftrace: Add dynamic function tracer (include graph tracer) csky: Fixup vdsp&fpu issues in kernel
2019-05-08Merge tag 'media/v5.1-2' of ↵Linus Torvalds324-13909/+7625
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - remove the deprecated Zoran driver from staging - new I2C driver: ST MIPID02 CSI-2 camera bridge - new platform driver: Amlogic Meson AO CEC G12A Controller - add support for USB audio via the media controller - au0828 driver is now supported via the media controller on both on media and on usbaudio - new kernel test for the media device allocator - add support for stateless decoder at vicodec driver - lots of other driver improvements fixes and cleanups * tag 'media/v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (218 commits) media: dt-bindings: aspeed-video: Add missing memory-region property media: platform: Aspeed: Make reserved memory optional media: platform: Aspeed: Remove use of reset line media: stm32-dcmi: return appropriate error codes during probe media: vsp1: Add support for missing 16-bit RGB555 formats media: vsp1: Add support for missing 16-bit RGB444 formats media: vsp1: Add support for missing 32-bit RGB formats media: v4l: Add definitions for missing 16-bit RGB555 formats media: v4l: Add definitions for missing 16-bit RGB4444 formats media: v4l: Add definitions for missing 32-bit RGB formats media: zoran: remove deprecated driver media: MAINTAINERS: Update AO CEC with ao-cec-g12a driver media: platform: meson: Add Amlogic Meson G12A AO CEC Controller driver media: dt-bindings: media: meson-ao-cec: Add G12A AO-CEC-B Compatible media: cros-ec-cec: decrement HDMI device refcount media: seco-cec: decrement HDMI device refcount media: tegra_cec: use new cec_notifier_parse_hdmi_phandle helper media: stih_cec: use new cec_notifier_parse_hdmi_phandle helper media: s5p_cec: use new cec_notifier_parse_hdmi_phandle helper media: meson: ao-cec: use new cec_notifier_parse_hdmi_phandle helper ...
2019-05-08Merge tag 'for-linus-5.2' of git://github.com/cminyard/linux-ipmiLinus Torvalds11-27/+35
Pull IPMI updates from Corey Minyard: "Some minor cleanups for the IPMI driver" * tag 'for-linus-5.2' of git://github.com/cminyard/linux-ipmi: ipmi: Remove warning if no slave address is present ipmi:ssif: Only unregister the platform driver if it was registered ipmi:ssif: compare block number correctly for multi-part return messages ipmi: Add the i2c-addr property for SSIF interfaces char/ipmi: fix spelling mistake "receieved_messages" -> "received_messages" ipmi: avoid atomic_inc in exit function ipmi: Remove file from ipmi_file_private ipmi_si: remove an unused variable in try_smi_init() ipmi: Make ipmi_interfaces_srcu variable static
2019-05-08Merge tag 'pinctrl-v5.2-1' of ↵Linus Torvalds88-3012/+8120
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "It is pretty calm and chill in pin control for the moment. Just incremental development. There is an odd patch to the Super-H architecture, it's coming from the maintainers so should be fine. Summary: New drivers: - Bitmain BM1880 pin controller - Mediatek MT8516 - Cirrus Logich Lochnagar PMIC pins Updates: - Incremental development on Renesas SH-PFC - Incremental development on Intel pin controller and some particular updates for Cedarfork. - Pin configuration support in Allwinner SunXi drivers - Suspend/resume support in the NXP/Freescale i.MX8MQ driver - Support for more packaging of the ST Micro STM32" * tag 'pinctrl-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits) pinctrl: mcp23s08: Do not complain about unsupported params pinctrl: Rework Kconfig dependency for BM1880 pinctrl driver MAINTAINERS: Add entry for BM1880 pinctrl pinctrl: Add pinctrl support for BM1880 SoC dt-bindings: pinctrl: Add BM1880 pinctrl binding pinctrl: stm32: check irq controller availability at probe pinctrl: mediatek: Add MT8516 Pinctrl driver pinctrl: zte: fix leaked of_node references pinctrl: intel: Increase readability of intel_gpio_update_pad_mode() pinctrl: intel: Retain HOSTSW_OWN for requested gpio pin pinctrl: pistachio: fix leaked of_node references pinctrl: sunxi: Support I/O bias voltage setting on H6 pinctrl: sunxi: Prepare for alternative bias voltage setting methods pinctrl: st: fix leaked of_node references pinctrl: samsung: fix leaked of_node references pinctrl: stm32: align stm32mp157 pin names pinctrl: stm32: add package information for stm32mp157c pinctrl: stm32: introduce package support dt-bindings: pinctrl: stm32: add new entry for package information pinctrl: imx8mq: Add suspend/resume ops ...
2019-05-08Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds158-6428/+7540
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: qla2xxx, qedf, smartpqi, hpsa, lpfc, ufs, mpt3sas, ibmvfc and hisi_sas. Plus number of minor changes, spelling fixes and other trivia" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (298 commits) scsi: qla2xxx: Avoid that lockdep complains about unsafe locking in tcm_qla2xxx_close_session() scsi: qla2xxx: Avoid that qlt_send_resp_ctio() corrupts memory scsi: qla2xxx: Fix hardirq-unsafe locking scsi: qla2xxx: Complain loudly about reference count underflow scsi: qla2xxx: Use __le64 instead of uint32_t[2] for sending DMA addresses to firmware scsi: qla2xxx: Introduce the dsd32 and dsd64 data structures scsi: qla2xxx: Check the size of firmware data structures at compile time scsi: qla2xxx: Pass little-endian values to the firmware scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands scsi: qla2xxx: Use an on-stack completion in qla24xx_control_vp() scsi: qla2xxx: Make qla24xx_async_abort_cmd() static scsi: qla2xxx: Remove unnecessary locking from the target code scsi: qla2xxx: Remove qla_tgt_cmd.released scsi: qla2xxx: Complain if a command is released that is owned by the firmware scsi: qla2xxx: target: Fix offline port handling and host reset handling scsi: qla2xxx: Fix abort handling in tcm_qla2xxx_write_pending() scsi: qla2xxx: Fix error handling in qlt_alloc_qfull_cmd() scsi: qla2xxx: Simplify qlt_send_term_imm_notif() scsi: qla2xxx: Fix use-after-free issues in qla2xxx_qpair_sp_free_dma() scsi: qla2xxx: Fix a qla24xx_enable_msix() error path ...
2019-05-08Merge tag 'tty-5.2-rc1' of ↵Linus Torvalds60-911/+3679
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the "big" set of tty/serial driver patches for 5.2-rc1. It's really pretty small, not much happening in this portion of the kernel at the moment. When the "highlight" is the movement of the documentation from .txt to .rst files, it's a good merge window. There's a number of small fixes and updates over the various serial drivers, and a new "tty null" driver for those embedded systems that like to make things even smaller and not break things. All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (45 commits) tty: serial: add driver for the SiFive UART dt-bindings: serial: add documentation for the SiFive UART driver serial: uartps: Add support for cts-override dt-bindings: xilinx-uartps: Add support for cts-override serial: milbeaut_usio: Fix error handling in probe and remove tty: rocket: deprecate the rp_ioctl tty: rocket: Remove RCPK_GET_STRUCT ioctl tty: update obsolete termios comment tty: serial_core: fix error code returned by uart_register_driver() serial: 8250-mtk: modify baudrate setting serial: 8250-mtk: add follow control docs: serial: convert docs to ReST and rename to *.rst serial: 8250_exar: Adjust IOT2000 matching TTY: serial_core, add ->install serial: Fix using plain integer instead of Null pointer tty:serial_core: Spelling mistake tty: Add NULL TTY driver tty: vt: keyboard: Allow Unicode compose base char Revert "tty: fix NULL pointer issue when tty_port ops is not set" serial: Add Milbeaut serial control ...
2019-05-08Merge tag 'usb-5.2-rc1' of ↵Linus Torvalds206-3332/+12187
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver patches for 5.2-rc1 There is the usual set of: - USB gadget updates - PHY driver updates and additions - USB serial driver updates and fixes - typec updates and new chips supported - mtu3 driver updates - xhci driver updates - other tiny driver updates Nothing really interesting, just constant forward progress. All of these have been in linux-next for a while with no reported issues. The usb-gadget and usb-serial trees were merged a bit "late", but both of them had been in linux-next before they got merged here last Friday" * tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (206 commits) USB: serial: f81232: implement break control USB: serial: f81232: add high baud rate support USB: serial: f81232: clear overrun flag USB: serial: f81232: fix interrupt worker not stop usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA usb: dwc3: Fix default lpm_nyet_threshold value usb: dwc3: debug: Print GET_STATUS(device) tracepoint usb: dwc3: Do core validation early on probe usb: dwc3: gadget: Set lpm_capable usb: gadget: atmel: tie wake lock to running clock usb: gadget: atmel: support USB suspend usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask dwc2: gadget: Fix completed transfer size calculation in DDMA usb: dwc2: Set lpm mode parameters depend on HW configuration usb: dwc2: Fix channel disable flow usb: dwc2: Set actual frame number for completed ISOC transfer usb: gadget: do not use __constant_cpu_to_le16 usb: dwc2: gadget: Increase descriptors count for ISOC's usb: introduce usb_ep_type_string() function usb: dwc3: move synchronize_irq() out of the spinlock protected block ...
2019-05-08tool headers nolibc: add RISCV supportPranith Kumar1-0/+194
This adds support for the RISCV architecture (32 and 64 bit) to the nolibc header file. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> [willy: minimal rewording of the commit message] Signed-off-by: Willy Tarreau <w@1wt.eu>
2019-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1636-26976/+126809
Pull networking updates from David Miller: "Highlights: 1) Support AES128-CCM ciphers in kTLS, from Vakul Garg. 2) Add fib_sync_mem to control the amount of dirty memory we allow to queue up between synchronize RCU calls, from David Ahern. 3) Make flow classifier more lockless, from Vlad Buslov. 4) Add PHY downshift support to aquantia driver, from Heiner Kallweit. 5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces contention on SLAB spinlocks in heavy RPC workloads. 6) Partial GSO offload support in XFRM, from Boris Pismenny. 7) Add fast link down support to ethtool, from Heiner Kallweit. 8) Use siphash for IP ID generator, from Eric Dumazet. 9) Pull nexthops even further out from ipv4/ipv6 routes and FIB entries, from David Ahern. 10) Move skb->xmit_more into a per-cpu variable, from Florian Westphal. 11) Improve eBPF verifier speed and increase maximum program size, from Alexei Starovoitov. 12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit spinlocks. From Neil Brown. 13) Allow tunneling with GUE encap in ipvs, from Jacky Hu. 14) Improve link partner cap detection in generic PHY code, from Heiner Kallweit. 15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan Maguire. 16) Remove SKB list implementation assumptions in SCTP, your's truly. 17) Various cleanups, optimizations, and simplifications in r8169 driver. From Heiner Kallweit. 18) Add memory accounting on TX and RX path of SCTP, from Xin Long. 19) Switch PHY drivers over to use dynamic featue detection, from Heiner Kallweit. 20) Support flow steering without masking in dpaa2-eth, from Ioana Ciocoi. 21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri Pirko. 22) Increase the strict parsing of current and future netlink attributes, also export such policies to userspace. From Johannes Berg. 23) Allow DSA tag drivers to be modular, from Andrew Lunn. 24) Remove legacy DSA probing support, also from Andrew Lunn. 25) Allow ll_temac driver to be used on non-x86 platforms, from Esben Haabendal. 26) Add a generic tracepoint for TX queue timeouts to ease debugging, from Cong Wang. 27) More indirect call optimizations, from Paolo Abeni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits) cxgb4: Fix error path in cxgb4_init_module net: phy: improve pause mode reporting in phy_print_status dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings net: macb: Change interrupt and napi enable order in open net: ll_temac: Improve error message on error IRQ net/sched: remove block pointer from common offload structure net: ethernet: support of_get_mac_address new ERR_PTR error net: usb: smsc: fix warning reported by kbuild test robot staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check net: dsa: support of_get_mac_address new ERR_PTR error net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats vrf: sit mtu should not be updated when vrf netdev is the link net: dsa: Fix error cleanup path in dsa_init_module l2tp: Fix possible NULL pointer dereference taprio: add null check on sched_nest to avoid potential null pointer dereference net: mvpp2: cls: fix less than zero check on a u32 variable net_sched: sch_fq: handle non connected flows net_sched: sch_fq: do not assume EDT packets are ordered net: hns3: use devm_kcalloc when allocating desc_cb net: hns3: some cleanup for struct hns3_enet_ring ...
2019-05-07Merge tag 'devicetree-for-5.2' of ↵Linus Torvalds28-196/+341
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: - Fix possible memory leak in reserved-memory failure case - Support for DMA parent bus which are not a parent node - Clang -Wunsequenced fix - Remove some unnecessary prints on memory alloc failures - Various printk msg and comment fixes - Update DT schema tools repository location - Convert simple-framebuffer binding to DT schema - Bindings for isl68137 and ir38064 trivial devices - New documentation on binding do's and don't's for binding writers to ignore * tag 'devicetree-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (22 commits) of: unittest: Remove error printing on OOM of: irq: Remove WARN_ON() for kzalloc() failure dt-bindings: pinctrl: fix bias-pull,up typo dt-bindings: Update schema project location to devicetree.org github group of: fix clang -Wunsequenced for be32_to_cpu() of/device.c: fix the wrong comments dt-bindings: Add isl68137 as a trivial device dt-bindings: Add ir38064 as a trivial device of: del redundant type conversion dt-bindings: mfd: axp20x: Add fallback for axp805 of: Improve of_phandle_iterator_next() error message dt-bindings: connector: Spelling mistake dt-bindings: Add schemas for simple-framebuffer of: address: Add support for the parent DMA bus of: address: Retrieve a parent through a callback in __of_translate_address dt-bindings: bus: Add binding for the Allwinner MBUS controller dt-bindings: interconnect: Add a dma interconnect name of: use correct function prototype for of_overlay_fdt_apply() of: reserved_mem: fix reserve memory leak of: property: Document that of_graph_get_endpoint_by_regs needs of_node_put ...
2019-05-07Merge tag 'random_for_linus' of ↵Linus Torvalds4-78/+156
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull randomness updates from Ted Ts'o: - initialize the random driver earler - fix CRNG initialization when we trust the CPU's RNG on NUMA systems - other miscellaneous cleanups and fixes. * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: add a spinlock_t to struct batched_entropy random: document get_random_int() family random: fix CRNG initialization when random.trust_cpu=1 random: move rand_initialize() earlier random: only read from /dev/random after its pool has received 128 bits drivers/char/random.c: make primary_crng static drivers/char/random.c: remove unused stuct poolinfo::poolbits drivers/char/random.c: constify poolinfo_table
2019-05-07Merge tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscryptLinus Torvalds18-144/+294
Pull fscrypt updates from Ted Ts'o: "Clean up fscrypt's dcache revalidation support, and other miscellaneous cleanups" * tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: fscrypt: cache decrypted symlink target in ->i_link vfs: use READ_ONCE() to access ->i_link fscrypt: fix race where ->lookup() marks plaintext dentry as ciphertext fscrypt: only set dentry_operations on ciphertext dentries fs, fscrypt: clear DCACHE_ENCRYPTED_NAME when unaliasing directory fscrypt: fix race allowing rename() and link() of ciphertext dentries fscrypt: clean up and improve dentry revalidation fscrypt: use READ_ONCE() to access ->i_crypt_info fscrypt: remove WARN_ON_ONCE() when decryption fails fscrypt: drop inode argument from fscrypt_get_ctx()
2019-05-07cifs: update module internal version numberSteve French1-1/+1
To 2.20 Signed-off-by: Steve French <stfrench@microsoft.com>
2019-05-07SMB3: Clean up query symlink when reparse pointRonnie Sahlberg4-17/+118
Two of the common symlink formats use reparse points (unlike mfsymlinks and also unlike the SMB1 posix extensions). This is the first part of the fixes to allow these reparse points (NFS style and Windows symlinks) to be resolved properly as symlinks by the client. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-05-07cifs: fix strcat buffer overflow and reduce raciness in smb21_set_oplock_level()Christoph Probst1-6/+8
Change strcat to strncpy in the "None" case to fix a buffer overflow when cinode->oplock is reset to 0 by another thread accessing the same cinode. It is never valid to append "None" to any other message. Consolidate multiple writes to cinode->oplock to reduce raciness. Signed-off-by: Christoph Probst <kernel@probst.it> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org>
2019-05-07Negotiate and save preferred compression algorithmsSteve French4-7/+61
New negotiate context (3) allows the server and client to negotiate which compression algorithms to use. Add support for this and save it off in the server structure. Also now displayed in /proc/fs/cifs/DebugData (see below example to Windows 10) where compression algoirthm "LZ77" was negotiated: Servers: Number of credits: 326 Dialect 0x311 COMPRESS_LZ77 signed 1) Name: 192.168.92.17 Uses: 1 Capability: 0x300067 Session Status: 1 TCP status: 1 Instance: 1 See MS-XCA and MS-SMB2 2.2.3.1 for more details. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2019-05-07cifs: rename and clarify CIFS_ASYNC_OP and CIFS_NO_RESPRonnie Sahlberg4-107/+14
The flags were named confusingly. CIFS_ASYNC_OP now just means that we will not block waiting for credits to become available so we thus rename this to be CIFS_NON_BLOCKING. Change CIFS_NO_RESP to CIFS_NO_RSP_BUF to clarify that we will actually get a response from the server but we will not get/do not want a response buffer. Delete CIFSSMBNotify. This is an SMB1 function that is not used. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-05-07cifs: fix credits leak for SMB1 oplock breaksRonnie Sahlberg3-6/+7
For SMB1 oplock breaks we would grab one credit while sending the PDU but we would never relese the credit back since we will never receive a response to this from the server. Eventuallt this would lead to a hang once all credits are leaked. Fix this by defining a new flag CIFS_NO_SRV_RSP which indicates that there is no server response to this command and thus we need to add any credits back immediately after sending the PDU. CC: Stable <stable@vger.kernel.org> #v5.0+ Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-05-07smb3: Add protocol structs for change notify supportSteve French1-0/+36
Add the SMB3 protocol flag definitions and structs for change notify. Future patches will add the hooks to allow it to be invoked from the client. See MS-FSCC 2.6 and MS-SMB2 2.2.35 Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2019-05-07cifs: fix smb3_zero_range for AzureRonnie Sahlberg1-47/+7
For zero-range that also extend the file we were sending this as a compound of two different operations; a fsctl to set-zero-data for the range and then an additional set-info to extend the file size. This does not work for Azure since it does not support this fsctl which leads to fallocate(FALLOC_FL_ZERO_RANGE) failing but still changing the file size. To fix this we un-compound this and send these two operations as separate commands, firsat one command to set-zero-data for the range and it this was successful we proceed to send a set-info to update the file size. This fixes xfstest generic/469 for Azure servers. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-05-07cifs: zero-range does not require the file is sparseRonnie Sahlberg1-12/+0
Remove the conditional to fail zero-range if the file is not flagged as sparse. You can still zero out a range in SMB2 even for non-sparse files. Tested with stock windows16 server. Fixes 5 xfstests (033, 149, 155, 180, 349) Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-05-07Add new flag on SMB3.1.1 readSteve French1-0/+1
For compressed read support. See MS-SMB2 3.1.4.4 Signed-off-by: Steve French <stfrench@microsoft.com>
2019-05-07cifs: add fiemap supportRonnie Sahlberg8-2/+132
Useful for improved copy performance as well as for applications which query allocated ranges of sparse files. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-05-07SMB3: Add defines for new negotiate contextsSteve French2-4/+27
See the latest MS-SMB2 protocol specification updates. These will be needed for implementing compression support on the wire for example. Signed-off-by: Steve French <stfrench@microsoft.com>
2019-05-07cifs: fix bi-directional fsctl passthrough callsRonnie Sahlberg1-1/+8
SMB2 Ioctl responses from servers may respond with both the request blob from the client followed by the actual reply blob for ioctls that are bi-directional. In that case we can not assume that the reply blob comes immediately after the ioctl response structure. This fixes FSCTLs such as SMB2:FSCTL_QUERY_ALLOCATED_RANGES Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-05-07cifs: smbd: take an array of reqeusts when sending upper layer dataLong Li3-30/+32
To support compounding, __smb_send_rqst() now sends an array of requests to the transport layer. Change smbd_send() to take an array of requests, and send them in as few packets as possible. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org>
2019-05-07SMB3: Add handling for different FSCTL access flagsSteve French1-1/+9
DesiredAccess field in SMB3 open request needs to be set differently for READ vs. WRITE ioctls (not just ones that request both). Originally noticed by Pavel Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2019-05-07cifs: Add support for FSCTL passthrough that write data to the serverRonnie Sahlberg2-2/+42
Add support to pass a blob to the server in FSCTL passthrough. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-05-07cifs: remove superfluous inode_lock in cifs_{strict_}fsyncJeff Layton1-5/+0
Originally, filemap_write_and_wait took the i_mutex internally, but commit 02c24a82187d pushed the mutex acquisition into the individual fsync routines, leaving it up to the subsystem maintainers to remove it if it wasn't needed. For cifs, I see no reason to take the inode_lock here. All of the operations inside that lock are protected in other ways. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-05-07cifs: Call MID callback before destroying transportLong Li1-17/+19
When transport is being destroyed, it's possible that some processes may hold memory registrations that need to be deregistred. Call them first so nobody is using transport resources, and it can be destroyed. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-05-07cifs: smbd: Retry on memory registration failureLong Li1-2/+2
Memory registration failure doesn't mean this I/O has failed, it means the transport is hitting I/O error or needs reconnect. This error is not from the server. Indicate this error to upper layer, and let upper layer decide how to reconnect and proceed with this I/O. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-05-07cifs: smbd: Indicate to retry on transport sending failureLong Li1-2/+3
Failure to send a packet doesn't mean it's a permanent failure, it can't be returned to user process. This I/O should be retried or failed based on server packet response and transport health. This logic is handled by the upper layer. Give this decision to upper layer. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-05-07cifs: smbd: Return EINTR when interruptedLong Li1-1/+1
When packets are waiting for outbound I/O and interrupted, return the proper error code to user process. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-05-07cifs: smbd: Don't destroy transport on RDMA disconnectLong Li3-127/+10
Now upper layer is handling the transport shutdown and reconnect, remove the code that handling transport shutdown on RDMA disconnect. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-05-07smbd: Make upper layer decide when to destroy the transportLong Li3-27/+101
On transport recoonect, upper layer CIFS code destroys the current transport and then recoonect. This code path is not used by SMBD, in that SMBD destroys its transport on RDMA disconnect notification independent of CIFS upper layer behavior. This approach adds some costs to SMBD layer to handle transport shutdown and restart, and to deal with several racing conditions on reconnecting transport. Re-work this code path by introducing a new smbd_destroy. This function is called form upper layer to ask SMBD to destroy the transport. SMBD will no longer need to destroy the transport by itself while worrying about data transfer is in progress. The upper layer guarantees the transport is locked. change log: v2: fix build errors when CONFIG_CIFS_SMB_DIRECT is not configured Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-05-07SMB3: update comment to clarify enumerating snapshotsSteve French1-0/+8
Trivial update to comment suggested by Pavel. Signed-off-by: Steve French <stfrench@microsoft.com>
2019-05-07CIFS: check CIFS_MOUNT_NO_DFS when trying to reuse existing sbAurelien Aptel1-1/+10
if we mount A then mount A again with nodfs, we shouldn't reuse the superblock. document the purpose of the defines as well. there are most likely more flags that needs to be added to this mask, in fact the logic to find them should be which flag should be *ignored* when trying to reuse an existing sb. Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-05-07CIFS: Show locallease in /proc/mounts for cifs shares mounted with ↵Kenneth D'souza1-0/+2
locallease feature. Missing parameter that should be displayed in the mount list Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Kenneth D'souza <kdsouza@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-05-07cifs: Fix DFS cache refresher for DFS linksPaulo Alcantara (SUSE)4-25/+151
As per MS-DFSC, when a DFS cache entry is expired and it is a DFS link, then a new DFS referral must be sent to root server in order to refresh the expired entry. This patch ensures that all new DFS referrals for refreshing the cache are sent to DFS root. Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-05-07cifs: don't use __constant_cpu_to_le32()Sergey Senozhatsky1-1740/+1740
A trivial patch. cpu_to_le32() is capable enough to detect __builtin_constant_p() and to use an appropriate compile time ___constant_swahb32() function. So we can use cpu_to_le32() instead of __constant_cpu_to_le32(). Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-05-07SMB3: Track total time spent on roundtrips for each SMB3 commandSteve French3-6/+44
Also track minimum and maximum time by command in /proc/fs/cifs/Stats Signed-off-by: Steve French <stfrench@microsoft.com>