Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"Waiman's fix for a cgroup2 cpuset bug where it could miss nodes which
were hot-added"
* 'for-5.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Remove cpus_allowed/mems_allowed setup in cpuset_init_smp()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fs fixes from Jan Kara:
"Three fixes that I'd still like to get to 5.18:
- add a missing sanity check in the fanotify FAN_RENAME feature
(added in 5.17, let's fix it before it gets wider usage in
userspace)
- udf fix for recently introduced filesystem corruption issue
- writeback fix for a race in inode list handling that can lead to
delayed writeback and possible dirty throttling stalls"
* tag 'fixes_for_v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Avoid using stale lengthOfImpUse
writeback: Avoid skipping inode writeback
fanotify: do not allow setting dirent events in mask of non-dir
|
|
Pull virtio fix from Michael Tsirkin:
"A last minute fixup of the transitional ID numbers.
Important to get these right - if users start to depend on the wrong
ones they are very hard to fix"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio: fix virtio transitional ids
|
|
udf_write_fi() uses lengthOfImpUse of the entry it is writing to.
However this field has not yet been initialized so it either contains
completely bogus value or value from last directory entry at that place.
In either case this is wrong and can lead to filesystem corruption or
kernel crashes.
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
CC: stable@vger.kernel.org
Fixes: 979a6e28dd96 ("udf: Get rid of 0-length arrays in struct fileIdentDesc")
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
This commit fixes the transitional PCI device ID.
Fixes: d61914ea6ada ("virtio: update virtio id table, add transitional ids")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Link: https://lore.kernel.org/r/20220510102723.87666-1-mie@igel.co.jp
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
We have run into an issue that a task gets stuck in
balance_dirty_pages_ratelimited() when perform I/O stress testing.
The reason we observed is that an I_DIRTY_PAGES inode with lots
of dirty pages is in b_dirty_time list and standard background
writeback cannot writeback the inode.
After studing the relevant code, the following scenario may lead
to the issue:
task1 task2
----- -----
fuse_flush
write_inode_now //in b_dirty_time
writeback_single_inode
__writeback_single_inode
fuse_write_end
filemap_dirty_folio
__xa_set_mark:PAGECACHE_TAG_DIRTY
lock inode->i_lock
if mapping tagged PAGECACHE_TAG_DIRTY
inode->i_state |= I_DIRTY_PAGES
unlock inode->i_lock
__mark_inode_dirty:I_DIRTY_PAGES
lock inode->i_lock
-was dirty,inode stays in
-b_dirty_time
unlock inode->i_lock
if(!(inode->i_state & I_DIRTY_All))
-not true,so nothing done
This patch moves the dirty inode to b_dirty list when the inode
currently is not queued in b_io or b_more_io list at the end of
writeback_single_inode.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
CC: stable@vger.kernel.org
Fixes: 0ae45f63d4ef ("vfs: add support for a lazytime mount option")
Signed-off-by: Jing Xia <jing.xia@unisoc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220510023514.27399-1-jing.xia@unisoc.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- thinkpad_acpi AMD suspend/resume + fan detection fixes
- two other small fixes
- one hardware-id addition
* tag 'platform-drivers-x86-v5.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/surface: aggregator: Fix initialization order when compiling as builtin module
platform/surface: gpe: Add support for Surface Pro 8
platform/x86/intel: Fix 'rmmod pmt_telemetry' panic
platform/x86: thinkpad_acpi: Correct dual fan probe
platform/x86: thinkpad_acpi: Add a s2idle resume quirk for a number of laptops
platform/x86: thinkpad_acpi: Convert btusb DMI list to quirks
|
|
Dirent events (create/delete/move) are only reported on watched
directory inodes, but in fanotify as well as in legacy inotify, it was
always allowed to set them on non-dir inode, which does not result in
any meaningful outcome.
Until kernel v5.17, dirent events in fanotify also differed from events
"on child" (e.g. FAN_OPEN) in the information provided in the event.
For example, FAN_OPEN could be set in the mask of a non-dir or the mask
of its parent and event would report the fid of the child regardless of
the marked object.
By contrast, FAN_DELETE is not reported if the child is marked and the
child fid was not reported in the events.
Since kernel v5.17, with fanotify group flag FAN_REPORT_TARGET_FID, the
fid of the child is reported with dirent events, like events "on child",
which may create confusion for users expecting the same behavior as
events "on child" when setting events in the mask on a child.
The desired semantics of setting dirent events in the mask of a child
are not clear, so for now, deny this action for a group initialized
with flag FAN_REPORT_TARGET_FID and for the new event FAN_RENAME.
We may relax this restriction in the future if we decide on the
semantics and implement them.
Fixes: d61fd650e9d2 ("fanotify: introduce group flag FAN_REPORT_TARGET_FID")
Fixes: 8cc3b1ccd930 ("fanotify: wire up FAN_RENAME event")
Link: https://lore.kernel.org/linux-fsdevel/20220505133057.zm5t6vumc4xdcnsg@quack3.lan/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220507080028.219826-1-amir73il@gmail.com
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"Some reverts of existing patches, which were necessary because of boot
issues due to wrong CPU clock handling and cache issues which led to
userspace segfaults with 32bit kernels. Dave has a whole bunch of
upcoming cache fixes which I then plan to push in the next merge
window.
Other than that just small updates and fixes, e.g. defconfig updates,
spelling fixes, a clocksource fix, boot topology fixes and a fix for
/proc/cpuinfo output to satisfy lscpu"
* tag 'for-5.18/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
Revert "parisc: Increase parisc_cache_flush_threshold setting"
parisc: Mark cr16 clock unstable on all SMP machines
parisc: Fix typos in comments
parisc: Change MAX_ADDRESS to become unsigned long long
parisc: Merge model and model name into one line in /proc/cpuinfo
parisc: Re-enable GENERIC_CPU_DEVICES for !SMP
parisc: Update 32- and 64-bit defconfigs
parisc: Only list existing CPUs in cpu_possible_mask
Revert "parisc: Fix patch code locking and flushing"
Revert "parisc: Mark sched_clock unstable only if clocks are not syncronized"
Revert "parisc: Mark cr16 CPU clocksource unstable on all SMP machines"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix the DWARF CFI in our VDSO time functions, allowing gdb to
backtrace through them correctly.
- Fix a buffer overflow in the papr_scm driver, only triggerable by
hypervisor input.
- A fix in the recently added QoS handling for VAS (used for
communicating with coprocessors).
Thanks to Alan Modra, Haren Myneni, Kajol Jain, and Segher Boessenkool.
* tag 'powerpc-5.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/papr_scm: Fix buffer overflow issue with CONFIG_FORTIFY_SOURCE
powerpc/vdso: Fix incorrect CFI in gettimeofday.S
powerpc/pseries/vas: Use QoS credits from the userspace
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A fix and an email address update:
- Prevent FPU state corruption.
The condition in irq_fpu_usable() grants FPU usage when the FPU is
not used in the kernel. That's just wrong as it does not take the
fpregs_lock()'ed regions into account. If FPU usage happens within
such a region from interrupt context, then the FPU state gets
corrupted.
That's a long standing bug, which got unearthed by the recent
changes to the random code.
- Josh wants to use his kernel.org email address"
* tag 'x86-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Prevent FPU state corruption
MAINTAINERS: Update Josh Poimboeuf's email address
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A fix and an email address update:
- Mark the NMI safe time accessors notrace to prevent tracer
recursion when they are selected as trace clocks.
- John Stultz has a new email address"
* tag 'timers-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Mark NMI safe time accessors as notrace
MAINTAINERS: Update email address for John Stultz
|
|
This reverts commit a58e9d0984e8dad53f17ec73ae3c1cc7f8d88151.
Triggers segfaults with 32-bit kernels on PA8500 machines.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A fix for the threaded interrupt core.
A quick sequence of request/free_irq() can result in a hang because
the interrupt thread did not reach the thread function and got stopped
in the kthread core already. That leaves a state active counter
arround which makes a invocation of synchronized_irq() on that
interrupt hang forever.
Ensure that the thread reached the thread function in request_irq() to
prevent that"
* tag 'irq-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Synchronize interrupt thread startup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixlet from Thomas Gleixner:
"Just a email address update for MAINTAINERS and mailmap"
* tag 'locking-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: MAINTAINERS, .mailmap: Update André's email address
|
|
The cr16 interval timers are not synchronized across CPUs, even with just
one dual-core CPU. This becomes visible if the machines have a longer
uptime.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Dave noticed that for the 32-bit kernel MAX_ADDRESS should be a ULL,
otherwise this define would become 0:
MAX_ADDRESS (1UL << MAX_ADDRBITS)
It has no real effect on the kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: John David Anglin <dave.anglin@bell.net>
|
|
The Linux tool "lscpu" shows the double amount of CPUs if we have
"model" and "model name" in two different lines in /proc/cpuinfo.
This change combines the model and the model name into one line.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
|
|
In commit 62773112acc5 ("parisc: Switch from GENERIC_CPU_DEVICES to
GENERIC_ARCH_TOPOLOGY") GENERIC_CPU_DEVICES was unconditionally turned
off, but this triggers a warning in topology_add_dev(). Turning it back
on for the !SMP case avoids this warning.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 62773112acc5 ("parisc: Switch from GENERIC_CPU_DEVICES to GENERIC_ARCH_TOPOLOGY")
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Enable CONFIG_CGROUPS=y on 32-bit defconfig for systemd-support, and
enable CONFIG_NAMESPACES and CONFIG_USER_NS.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The inventory knows which CPUs are in the system, so this bitmask should
be in cpu_possible_mask instead of the bitmask based on CONFIG_NR_CPUS.
Reset the cpu_possible_mask before scanning the system for CPUs, and
mark each existing CPU as possible during initialization of that CPU.
This avoids those warnings later on too:
register_cpu_capacity_sysctl: too early to get CPU4 device!
Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: John David Anglin <dave.anglin@bell.net>
|
|
This reverts commit a9fe7fa7d874a536e0540469f314772c054a0323.
Leads to segfaults on 32bit kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
This reverts commit d97180ad68bdb7ee10f327205a649bc2f558741d.
It triggers RCU stalls at boot with a 32-bit kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v5.15+
|
|
This reverts commit afdb4a5b1d340e4afffc65daa21cc71890d7d589.
It triggers RCU stalls at boot with a 32-bit kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v5.16+
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull PASID fix from Thomas Gleixner:
"A single bugfix for the PASID management code, which freed the PASID
too early. The PASID needs to be tied to the mm lifetime, not to the
address space lifetime"
* tag 'core-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
mm: Fix PASID use-after-free issue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This became slightly larger as I've been off in the last weeks.
The majority of changes here is about ASoC, fixes for dmaengine
and for addressing issues reported by CI, as well as other
device-specific small fixes.
Also, fixes for FireWire core stack and the usual HD-audio quirks
are included"
* tag 'sound-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ASoC: SOF: Fix NULL pointer exception in sof_pci_probe callback
ASoC: ops: Validate input values in snd_soc_put_volsw_range()
ASoC: dmaengine: Restore NULL prepare_slave_config() callback
ASoC: atmel: mchp-pdmc: set prepare_slave_config
ASoC: max98090: Generate notifications on changes for custom control
ASoC: max98090: Reject invalid values in custom control put()
ALSA: fireworks: fix wrong return count shorter than expected by 4 bytes
ALSA: hda/realtek: Add quirk for Yoga Duet 7 13ITL6 speakers
firewire: core: extend card->lock in fw_core_handle_bus_reset
firewire: remove check of list iterator against head past the loop body
firewire: fix potential uaf in outbound_phy_packet_callback()
ASoC: rt9120: Correct the reg 0x09 size to one byte
ALSA: hda/realtek: Enable mute/micmute LEDs support for HP Laptops
ALSA: hda/realtek: Fix mute led issue on thinkpad with cs35l41 s-codec
ASoC: meson: axg-card: Fix nonatomic links
ASoC: meson: axg-tdm-interface: Fix formatters in trigger"
ASoC: soc-ops: fix error handling
ASoC: meson: Fix event generation for G12A tohdmi mux
ASoC: meson: Fix event generation for AUI CODEC mux
ASoC: meson: Fix event generation for AUI ACODEC mux
...
|
|
The last two users were floppy.c and ataflop.c respectively, it was
verified that no other drivers makes use of this, so let's remove it.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Minh Yuan <yuanmingbuaa@gmail.com>
Cc: Denis Efremov <efremov@linux.com>,
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the last driver making use of fd_request->error_count, which is
easy to get wrong as was shown in floppy.c. We don't need to keep it
there, it can be moved to the atari_floppy_struct instead, so let's do
this.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Minh Yuan <yuanmingbuaa@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Interrupt handler bad_flp_intr() may cause a UAF on the recently freed
request just to increment the error count. There's no point keeping
that one in the request anyway, and since the interrupt handler uses a
static pointer to the error which cannot be kept in sync with the
pending request, better make it use a static error counter that's reset
for each new request. This reset now happens when entering
redo_fd_request() for a new request via set_next_request().
One initial concern about a single error counter was that errors on one
floppy drive could be reported on another one, but this problem is not
real given that the driver uses a single drive at a time, as that
PC-compatible controllers also have this limitation by using shared
signals. As such the error count is always for the "current" drive.
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Tested-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.18
A larger collection of fixes than I'd like, mainly because mixer-test
is making it's way into the CI systems and turning up issues on a wider
range of systems. The most substantial thing though is a revert and an
alternative fix for a dmaengine issue where the fix caused disruption
for some other configurations, the core fix is backed out an a driver
specific thing done instead.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix the bounds check for the 'gpio-reserved-ranges' device property
in gpiolib-of
- drop the assignment of the pwm base number in gpio-mvebu (this was
missed by the patch doing it globally for all pwm drivers)
- fix the fwnode assignment (use own fwnode, not the parent's one) for
the GPIO irqchip in gpio-visconti
- update the irq_stat field before checking the trigger field in
gpio-pca953x
- update GPIO entry in MAINTAINERS
* tag 'gpio-fixes-for-v5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: pca953x: fix irq_stat not updated when irq is disabled (irq_mask not set)
gpio: visconti: Fix fwnode of GPIO IRQ
MAINTAINERS: update the GPIO git tree entry
gpio: mvebu: drop pwm base assignment
gpiolib: of: fix bounds check for 'gpio-reserved-ranges'
|
|
Pull block fixes from Jens Axboe:
"A single revert for a change that isn't needed in 5.18, and a small
series for s390/dasd"
* tag 'block-5.18-2022-05-06' of git://git.kernel.dk/linux-block:
s390/dasd: Use kzalloc instead of kmalloc/memset
s390/dasd: Fix read inconsistency for ESE DASD devices
s390/dasd: Fix read for ESE with blksize < 4k
s390/dasd: prevent double format of tracks for ESE devices
s390/dasd: fix data corruption for ESE devices
Revert "block: release rq qos structures for queue without disk"
|
|
Pull io_uring fix from Jens Axboe:
"Just a single file assignment fix this week"
* tag 'io_uring-5.18-2022-05-06' of git://git.kernel.dk/linux-block:
io_uring: assign non-fixed early for async work
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Regression fixes in zone activation:
- move a loop invariant out of the loop to avoid checking space
status
- properly handle unlimited activation
Other fixes:
- for subpage, force the free space v2 mount to avoid a warning and
make it easy to switch a filesystem on different page size systems
- export sysfs status of exclusive operation 'balance paused', so the
user space tools can recognize it and allow adding a device with
paused balance
- fix assertion failure when logging directory key range item"
* tag 'for-5.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: sysfs: export the balance paused state of exclusive operation
btrfs: fix assertion failure when logging directory key range item
btrfs: zoned: activate block group properly on unlimited active zone device
btrfs: zoned: move non-changing condition check out of the loop
btrfs: force v2 space cache usage for subpage mount
|
|
Pull NFS client fixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- Fix a socket leak when setting up an AF_LOCAL RPC client
- Ensure that knfsd connects to the gss-proxy daemon on setup
Bugfixes:
- Fix a refcount leak when migrating a task off an offlined transport
- Don't gratuitously invalidate inode attributes on delegation return
- Don't leak sockets in xs_local_connect()
- Ensure timely close of disconnected AF_LOCAL sockets"
* tag 'nfs-for-5.18-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
Revert "SUNRPC: attempt AF_LOCAL connect on setup"
SUNRPC: Ensure gss-proxy connects on setup
SUNRPC: Ensure timely close of disconnected AF_LOCAL sockets
SUNRPC: Don't leak sockets in xs_local_connect()
NFSv4: Don't invalidate inode attributes on delegation return
SUNRPC release the transport of a relocated task with an assigned transport
|
|
Pull kvm fixes from Paolo Bonzini:
"x86:
- Account for family 17h event renumberings in AMD PMU emulation
- Remove CPUID leaf 0xA on AMD processors
- Fix lockdep issue with locking all vCPUs
- Fix loss of A/D bits in SPTEs
- Fix syzkaller issue with invalid guest state"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: Exit to userspace if vCPU has injected exception and invalid state
KVM: SEV: Mark nested locking of vcpu->lock
kvm: x86/cpuid: Only provide CPUID leaf 0xA if host has architectural PMU
KVM: x86/svm: Account for family 17h event renumberings in amd_pmc_perf_hw_id
KVM: x86/mmu: Use atomic XCHG to write TDP MMU SPTEs with volatile bits
KVM: x86/mmu: Move shadow-present check out of spte_has_volatile_bits()
KVM: x86/mmu: Don't treat fully writable SPTEs as volatile (modulo A/D)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
- A fix to relocate the DTB early in boot, in cases where the
bootloader doesn't put the DTB in a region that will end up
mapped by the kernel.
This manifests as a crash early in boot on a handful of
configurations.
* tag 'riscv-for-linus-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: relocate DTB if it's outside memory region
|
|
Exit to userspace with an emulation error if KVM encounters an injected
exception with invalid guest state, in addition to the existing check of
bailing if there's a pending exception (KVM doesn't support emulating
exceptions except when emulating real mode via vm86).
In theory, KVM should never get to such a situation as KVM is supposed to
exit to userspace before injecting an exception with invalid guest state.
But in practice, userspace can intervene and manually inject an exception
and/or stuff registers to force invalid guest state while a previously
injected exception is awaiting reinjection.
Fixes: fc4fad79fc3d ("KVM: VMX: Reject KVM_RUN if emulation is required with pending exception")
Reported-by: syzbot+cfafed3bb76d3e37581b@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220502221850.131873-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
svm_vm_migrate_from() uses sev_lock_vcpus_for_migration() to lock all
source and target vcpu->locks. Unfortunately there is an 8 subclass
limit, so a new subclass cannot be used for each vCPU. Instead maintain
ownership of the first vcpu's mutex.dep_map using a role specific
subclass: source vs target. Release the other vcpu's mutex.dep_maps.
Fixes: b56639318bb2b ("KVM: SEV: Add support for SEV intra host migration")
Reported-by: John Sperbeck<jsperbeck@google.com>
Suggested-by: David Rientjes <rientjes@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Peter Gonda <pgonda@google.com>
Message-Id: <20220502165807.529624-1-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull rdma fixes from Jason Gunthorpe:
"A few recent regressions in rxe's multicast code, and some old driver
bugs:
- Error case unwind bug in rxe for rkeys
- Dot not call netdev functions under a spinlock in rxe multicast
code
- Use the proper BH lock type in rxe multicast code
- Fix idrma deadlock and crash
- Add a missing flush to drain irdma QPs when in error
- Fix high userspace latency in irdma during destroy due to
synchronize_rcu()
- Rare race in siw MPA processing"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/rxe: Change mcg_lock to a _bh lock
RDMA/rxe: Do not call dev_mc_add/del() under a spinlock
RDMA/siw: Fix a condition race issue in MPA request processing
RDMA/irdma: Fix possible crash due to NULL netdev in notifier
RDMA/irdma: Reduce iWARP QP destroy time
RDMA/irdma: Flush iWARP QP if modified to ERR from RTR state
RDMA/rxe: Recheck the MR in when generating a READ reply
RDMA/irdma: Fix deadlock in irdma_cleanup_cm_core()
RDMA/rxe: Fix "Replace mr by rkey in responder resources"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull mmc fixes from Ulf Hansson:
"MMC core:
- Fix initialization for eMMC's HS200/HS400 mode
MMC host:
- sdhci-msm: Reset GCC_SDCC_BCR register to prevent timeout issues
- sunxi-mmc: Fix DMA descriptors allocated above 32 bits"
* tag 'mmc-v5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-msm: Reset GCC_SDCC_BCR register for SDHC
mmc: sunxi-mmc: Fix DMA descriptors allocated above 32 bits
mmc: core: Set HS clock speed before sending HS CMD13
|
|
Pull drm fixes from Dave Airlie:
"A pretty quiet week, one fbdev, msm, kconfig, and two amdgpu fixes,
about what I'd expect for rc6.
fbdev:
- hotunplugging fix
amdgpu:
- Fix a xen dom0 regression on APUs
- Fix a potential array overflow if a receiver were to send an
erroneous audio channel count
msm:
- lockdep fix.
it6505:
- kconfig fix"
* tag 'drm-fixes-2022-05-06' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Avoid reading audio pattern past AUDIO_CHANNELS_COUNT
drm/amdgpu: do not use passthrough mode in Xen dom0
drm/bridge: ite-it6505: add missing Kconfig option select
fbdev: Make fb_release() return -ENODEV if fbdev was unregistered
drm/msm/dp: remove fail safe mode related code
|
|
When one port's input state get inverted (eg. from low to hight) after
pca953x_irq_setup but before setting irq_mask (by some other driver such as
"gpio-keys"), the next inversion of this port (eg. from hight to low) will not
be triggered any more (because irq_stat is not updated at the first time). Issue
should be fixed after this commit.
Fixes: 89ea8bbe9c3e ("gpio: pca953x.c: add interrupt handling capability")
Signed-off-by: Puyou Lu <puyou.lu@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
builtin module
When building the Surface Aggregator Module (SAM) core, registry, and
other SAM client drivers as builtin modules (=y), proper initialization
order is not guaranteed. Due to this, client driver registration
(triggered by device registration in the registry) races against bus
initialization in the core.
If any attempt is made at registering the device driver before the bus
has been initialized (i.e. if bus initialization fails this race) driver
registration will fail with a message similar to:
Driver surface_battery was unable to register with bus_type surface_aggregator because the bus was not initialized
Switch from module_init() to subsys_initcall() to resolve this issue.
Note that the serdev subsystem uses postcore_initcall() so we are still
able to safely register the serdev device driver for the core.
Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem")
Reported-by: Blaž Hrastnik <blaz@mxxn.io>
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220429195738.535751-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The new Surface Pro 8 uses GPEs for lid events as well. Add an entry for
that so that the lid can be used to wake the device. Note that this is a
device with a keyboard type-cover, where this acts as the "lid".
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220429180049.1282447-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
'rmmod pmt_telemetry' panics with:
BUG: kernel NULL pointer dereference, address: 0000000000000040
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 4 PID: 1697 Comm: rmmod Tainted: G S W -------- --- 5.18.0-rc4 #3
Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR5 RVP, BIOS ADLPFWI1.R00.3056.B00.2201310233 01/31/2022
RIP: 0010:device_del+0x1b/0x3d0
Code: e8 1a d9 e9 ff e9 58 ff ff ff 48 8b 08 eb dc 0f 1f 44 00 00 41 56 41 55 41 54 55 48 8d af 80 00 00 00 53 48 89 fb 48 83 ec 18 <4c> 8b 67 40 48 89 ef 65 48 8b 04 25 28 00 00 00 48 89 44 24 10 31
RSP: 0018:ffffb520415cfd60 EFLAGS: 00010286
RAX: 0000000000000070 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000080 R08: ffffffffffffffff R09: ffffb520415cfd78
R10: 0000000000000002 R11: ffffb520415cfd78 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f7e198e5740(0000) GS:ffff905c9f700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000040 CR3: 000000010782a005 CR4: 0000000000770ee0
PKRU: 55555554
Call Trace:
<TASK>
? __xa_erase+0x53/0xb0
device_unregister+0x13/0x50
intel_pmt_dev_destroy+0x34/0x60 [pmt_class]
pmt_telem_remove+0x40/0x50 [pmt_telemetry]
auxiliary_bus_remove+0x18/0x30
device_release_driver_internal+0xc1/0x150
driver_detach+0x44/0x90
bus_remove_driver+0x74/0xd0
auxiliary_driver_unregister+0x12/0x20
pmt_telem_exit+0xc/0xe4a [pmt_telemetry]
__x64_sys_delete_module+0x13a/0x250
? syscall_trace_enter.isra.19+0x11e/0x1a0
do_syscall_64+0x58/0x80
? syscall_exit_to_user_mode+0x12/0x30
? do_syscall_64+0x67/0x80
? syscall_exit_to_user_mode+0x12/0x30
? do_syscall_64+0x67/0x80
? syscall_exit_to_user_mode+0x12/0x30
? do_syscall_64+0x67/0x80
? exc_page_fault+0x64/0x140
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f7e1803a05b
Code: 73 01 c3 48 8b 0d 2d 4e 38 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d fd 4d 38 00 f7 d8 64 89 01 48
The probe function, pmt_telem_probe(), adds an entry for devices even if
they have not been initialized. This results in the array of initialized
devices containing both initialized and uninitialized entries. This
causes a panic in the remove function, pmt_telem_remove() which expects
the array to only contain initialized entries.
Only use an entry when a device is initialized.
Cc: "David E. Box" <david.e.box@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: David Arcari <darcari@redhat.com>
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220429122322.2550003-1-prarit@redhat.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
There was an issue with the dual fan probe whereby the probe was
failing as it assuming that second_fan support was not available.
Corrected the logic so the probe works correctly. Cleaned up so
quirks only used if 2nd fan not detected.
Tested on X1 Carbon 10 (2 fans), X1 Carbon 9 (2 fans) and T490 (1 fan)
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220502191200.63470-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Lenovo laptops that contain NVME SSDs across a variety of generations have
trouble resuming from suspend to idle when the IOMMU translation layer is
active for the NVME storage device.
This generally manifests as a large resume delay or page faults. These
delays and page faults occur as a result of a Lenovo BIOS specific SMI
that runs during the D3->D0 transition on NVME devices.
This SMI occurs because of a flag that is set during resume by Lenovo
firmware:
```
OperationRegion (PM80, SystemMemory, 0xFED80380, 0x10)
Field (PM80, AnyAcc, NoLock, Preserve)
{
SI3R, 1
}
Method (_ON, 0, NotSerialized) // _ON_: Power On
{
TPST (0x60D0)
If ((DAS3 == 0x00))
{
If (SI3R)
{
TPST (0x60E0)
M020 (NBRI, 0x00, 0x00, 0x04, (NCMD | 0x06))
M020 (NBRI, 0x00, 0x00, 0x10, NBAR)
APMC = HDSI /* \HDSI */
SLPS = 0x01
SI3R = 0x00
TPST (0x60E1)
}
D0NV = 0x01
}
}
```
Create a quirk that will run early in the resume process to prevent this
SMI from running. As any of these machines are fixed, they can be peeled
back from this quirk or narrowed down to individual firmware versions.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1910
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1689
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mark Pearson <markpearson@lenvo.com>
Link: https://lore.kernel.org/r/20220429030501.1909-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|