summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2021-11-05ALSA: memalloc: Catch call with NULL snd_dma_buffer pointerTakashi Iwai1-0/+2
Although we've covered all calls with NULL dma buffer pointer, so far, there may be still some else in the wild. For catching such a case more easily, add a WARN_ON_ONCE() in snd_dma_get_ops(). Fixes: 37af81c5998f ("ALSA: core: Abstract memory alloc helpers") Link: https://lore.kernel.org/r/20211105102103.28148-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-11-04Revert "ALSA: memalloc: Convert x86 SG-buffer handling with non-contiguous type"Takashi Iwai4-54/+213
This reverts commit 2d9ea39917a4e4293bc2caea902c7059a330b611. We've got a regression report showing that the audio got broken the device over AMD IOMMU. The conversion assumed the wrong pointer / page mapping for the indirect mapping case, and we need to correct this urgently, so let's revert it for now. Fixes: 2d9ea39917a4 ("ALSA: memalloc: Convert x86 SG-buffer handling with non-contiguous type") Reported-and-tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca> Link: https://lore.kernel.org/r/20211104180846.16340-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-11-04ALSA: hda/realtek: Add a quirk for Acer Spin SP513-54NJaroslav Kysela1-0/+1
Another model requires ALC255_FIXUP_ACER_MIC_NO_PRESENCE fixup. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211853 Signed-off-by: Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211104155726.2090997-1-perex@perex.cz Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-11-04ALSA: firewire-motu: add support for MOTU Traveler mk3Takashi Sakamoto3-3/+21
Mark of the Unicorn (MOTU) shipped Traveler mk3 as one of models in third generation of its FireWire series, and discontinued it already. The model consists of below ICs: * Texas Instruments TSB41AB2 * Phillips Semiconductors PDI1394L40 * Altera cyclone EP1C3 * Texas Instruments TMS320VC5402 It supports sampling transfer frequency up to 192.0 kHz. The packet format differs depending on both of current sampling transfer frequency and whether to enable ADAT channels in rx/tx packets. The model supports transmission of PCM frames as well as MIDI messages. The model supports command mechanism to configure internal DSP. Hardware meter information is available in the first 2 chunks of each data block of tx packet. This commit adds support for it. $ cd linux-firewire-tools/src $ python crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 0410af0a bus_info_length 4, crc_length 16, crc 44810 404 31333934 bus_name "1394" 408 20ff7000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256) 40c 0001f200 company_id 0001f2 | 410 00090911 device_id 0000090911 | EUI-64 0001f20000090911 root directory ----------------------------------------------------------------- 414 0004ef04 directory_length 4, crc 61188 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 d1000002 --> unit directory at 428 424 8d000005 --> eui-64 leaf at 438 unit directory at 428 ----------------------------------------------------------------- 428 00031733 directory_length 3, crc 5939 42c 120001f2 specifier id 430 1300001b version 434 17102800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 00028484 leaf_length 2, crc 33924 43c 0001f200 company_id 0001f2 | 440 00090911 device_id 0000090911 | EUI-64 0001f20000090911 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20211104110627.94469-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-11-03ALSA: hda/realtek: Headset fixup for Clevo NH77HJQJeremy Soller1-0/+14
On Clevo NH77HJ, NH77HP, and their 15" variants, there is a headset microphone input attached to 0x19 that does not have a jack detect. In order to get it working, the pin configuration needs to be set correctly, and a new ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE fixup is applied. This is similar to the existing System76 quirk for ALC293, but for ALC256. Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211102172104.10610-1-tcrawford@system76.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-11-03ALSA: timer: Fix use-after-free problemWang Wensheng1-2/+2
When the timer instance was add into ack_list but was not currently in process, the user could stop it via snd_timer_stop1() without delete it from the ack_list. Then the user could free the timer instance and when it was actually processed UAF occurred. This issue could be reproduced via testcase snd_timer01 in ltp - running several instances of that testcase at the same time. What I actually met was that the ack_list of the timer broken and the kernel went into deadloop with irqoff. That could be detected by hardlockup detector on board or when we run it on qemu, we could use gdb to dump the ack_list when the console has no response. To fix this issue, we delete the timer instance from ack_list and active_list unconditionally in snd_timer_stop1(). Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com> Suggested-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211103033517.80531-1-wangwensheng4@huawei.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-11-02ALSA: usb-audio: Add quirk for Audient iD14Takashi Iwai1-0/+2
Audient iD14 (2708:0002) may get a control message error that interferes the operation e.g. with alsactl. Add the quirk to ignore such errors like other devices. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1191247 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211102161859.19301-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-11-02ALSA: hda/realtek: Add quirk for Clevo PC70HSTim Crawford1-0/+1
Apply the PB51ED PCI quirk to the Clevo PC70HS. Fixes audio output from the internal speakers. Signed-off-by: Tim Crawford <tcrawford@system76.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211101162134.5336-1-tcrawford@system76.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-11-01Merge tag 'asoc-v5.16' of ↵Takashi Iwai1901-17335/+63303
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.16 This is an unusually large set of updates, mostly a large crop of unusually big drivers coupled with extensive overhauls of existing code. There's a SH change here for the DAI format terminology, the change is straightforward and the SH maintainers don't seem very active. - A new version of the audio graph card which supports a wider range of systems. - Move of the Cirrus DSP framework into drivers/firmware to allow for future use by non-audio DSPs. - Several conversions to YAML DT bindings. - Continuing cleanups to the SOF and Intel code. - A very big overhaul of the cs42l42 driver, correcting many problems. - Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS, RT5682S, and RT9120 and Rockchip RV1126 and RK3568
2021-11-01ALSA: usb-audio: Line6 HX-Stomp XL USB_ID for 48k-fixed quirkJason Ormes1-0/+1
Adding the Line6 HX-Stomp XL USB_ID as it needs this fixed frequency quirk as well. The device is basically just the HX-Stomp with some more buttons on the face. I've done some recording with it after adding it, and it seems to function properly with this fix. The Midi features appear to be working as well. [ a coding style fix and patch reformat by tiwai ] Signed-off-by: Jason Ormes <skryking@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211030200405.1358678-1-skryking@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-11-01ALSA: usb-audio: Add registration quirk for JBL Quantum 400Alexander Tsoy1-0/+1
Add another device ID for JBL Quantum 400. It requires the same quirk as other JBL Quantum devices. Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211030174308.1011825-1-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-11-01Merge branch 'for-next' into for-linusTakashi Iwai52-464/+1806
Merge 5.16-devel branch for upstreaming Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-29Merge remote-tracking branch 'asoc/for-5.16' into asoc-nextMark Brown1367-13946/+57384
2021-10-29Merge remote-tracking branch 'asoc/for-5.15' into asoc-linusMark Brown33-257/+295
2021-10-29Merge series "Multiple headphone codec driver support" from Brent Lu ↵Mark Brown13-170/+119
<brent.lu@intel.com>: Support multiple headphone drivers in same machine driver. In this case, both rt5682 and rt5682s are supported and enumerated by different ACPI HID "10EC5682" and "RTL5682". V2 Changes: - remove useless 'NULL', 'false' in if-condition - can use 'comp_ids' field alone to enumerate driver - add comma to the end of entry in structure initialization - keep the table of byt/cht/cml/icl untouched V3 Changes: - upstreamd from SOF github, PR#3200 - use new compatiable IDs to shrink the enumerate table of BYT and CHT - add 'const' to snd_soc_acpi_codecs structures V4 Changes: - add signoff to patch 4~6 V5 Changes: - none, just rebase for patch 3 conflict Brent Lu (3): ASoC: soc-acpi: add comp_ids field for machine driver matching ASoC: Intel: sof_rt5682: detect codec variant in probe function ASoC: Intel: sof_rt5682: use comp_ids to enumerate rt5682s Pierre-Louis Bossart (3): ASoC: Intel: soc-acpi-byt: shrink tables using compatible IDs ASoC: Intel: soc-acpi-cht: shrink tables using compatible IDs ASoC: Intel: soc-acpi: use const for all uses of snd_soc_acpi_codecs include/sound/soc-acpi.h | 3 + sound/soc/intel/boards/sof_rt5682.c | 34 ++------- .../intel/common/soc-acpi-intel-adl-match.c | 11 ++- .../intel/common/soc-acpi-intel-bxt-match.c | 2 +- .../intel/common/soc-acpi-intel-byt-match.c | 68 +++++++----------- .../intel/common/soc-acpi-intel-cht-match.c | 69 +++++++------------ .../intel/common/soc-acpi-intel-cml-match.c | 8 +-- .../intel/common/soc-acpi-intel-glk-match.c | 2 +- .../intel/common/soc-acpi-intel-jsl-match.c | 43 ++++-------- .../intel/common/soc-acpi-intel-kbl-match.c | 12 ++-- .../intel/common/soc-acpi-intel-skl-match.c | 2 +- .../intel/common/soc-acpi-intel-tgl-match.c | 11 ++- sound/soc/soc-acpi.c | 24 ++++++- 13 files changed, 119 insertions(+), 170 deletions(-) -- 2.25.1
2021-10-29Merge series "ASoC: Sanity checks and soc-topology updates" from Cezary ↵Mark Brown3-7/+43
Rojewski <cezary.rojewski@intel.com>: Couple of soc-topology related changes and a use-after-free fix. Said fix and two sanity checks for soc-topology lead the way. While the use-after-free is quite obvious, the sanity checks are here to cover for cases where user malformed the topology file -or- access to filesystem somehow got interrupted during copy operation. We shouldn't be reading outside the file boundary. Afterward a change to soc_tplg_add_kcontrol(): device being passed to soc_tplg_add_dcontrol() from comp->dev to tplg->dev which corrects dev_xxx() invoked later on. Also, device used for topology memory allocations from component->dev to component->card->dev so memory gets freed each time card device (usually platform device) is removed rather than the component device what may happen less frequently. Dummy component gets smarter and no longer overrides hw_params if there are other components accociated with related struct snd_soc_pcm_runtime instance. Amadeusz Sławiński (5): ASoC: core: Remove invalid snd_soc_component_set_jack call ASoC: topology: Check for dapm widget completeness ASoC: topology: Use correct device for prints ASoC: topology: Change topology device to card device ASoC: Stop dummy from overriding hwparams Cezary Rojewski (1): ASoC: topology: Add header payload_size verification sound/soc/soc-core.c | 3 --- sound/soc/soc-topology.c | 34 ++++++++++++++++++++++++++++++---- sound/soc/soc-utils.c | 13 +++++++++++++ 3 files changed, 43 insertions(+), 7 deletions(-) -- 2.25.1
2021-10-29ASoC: rsnd: Fix an error handling path in 'rsnd_node_count()'Christophe JAILLET1-0/+1
If we return before the end of the 'for_each_child_of_node()' iterator, the reference taken on 'np' must be released. Add the missing 'of_node_put()' call. Fixes: c413983eb66a ("ASoC: rsnd: adjust disabled module") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/4c0e893cbfa21dc76c1ede0b6f4f8cff42209299.1634586167.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-29ASoC: tlv320aic3x: Make aic3x_remove() return voidUwe Kleine-König4-5/+8
Up to now aic3x_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c and spi remove callbacks is ignored anyway. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211019074125.3812513-1-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-29ASoC: Intel: soc-acpi: use const for all uses of snd_soc_acpi_codecsPierre-Louis Bossart6-17/+17
'const' qualifiers are missing on some platforms, add as needed. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Brent Lu <brent.lu@intel.com> Link: https://lore.kernel.org/r/20211029171409.611600-7-brent.lu@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-29ASoC: Intel: soc-acpi-cht: shrink tables using compatible IDsPierre-Louis Bossart1-44/+25
We have multiple entries for the same codecs, use the new compatible IDs to have a single entry. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Brent Lu <brent.lu@intel.com> Link: https://lore.kernel.org/r/20211029171409.611600-6-brent.lu@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-29ASoC: Intel: soc-acpi-byt: shrink tables using compatible IDsPierre-Louis Bossart1-44/+24
We have multiple entries for the same codecs, use the new compatible IDs to have a single entry. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Brent Lu <brent.lu@intel.com> Link: https://lore.kernel.org/r/20211029171409.611600-5-brent.lu@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-29ASoC: Intel: sof_rt5682: use comp_ids to enumerate rt5682sBrent Lu4-63/+24
Use comp_ids field to enumerate rt5682/rt5682s headphone codec for JSL/TGL/ADL devices and remove redundant entries in tables. Signed-off-by: Brent Lu <brent.lu@intel.com> Link: https://lore.kernel.org/r/20211029171409.611600-4-brent.lu@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-29ASoC: Intel: sof_rt5682: detect codec variant in probe functionBrent Lu1-0/+4
Detect whether the headphone codec is ALC5682I-VS or not in probe function so we don't need to duplicate all board configs for this new variant. Signed-off-by: Brent Lu <brent.lu@intel.com> Link: https://lore.kernel.org/r/20211029171409.611600-3-brent.lu@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-29ASoC: soc-acpi: add comp_ids field for machine driver matchingBrent Lu2-2/+25
A machine driver needs to be enumerated by more than one ACPI HID if it supports second headphone driver (i.e. rt5682 and rt5682s). However, the id field in snd_soc_acpi_mach structure could contain only one HID. By adding a 'comp_ids' field which can contain several HIDs, we can enumerate a machine driver by multiple ACPI HIDs. Signed-off-by: Brent Lu <brent.lu@intel.com> Link: https://lore.kernel.org/r/20211029171409.611600-2-brent.lu@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-29ASoC: mediatek: mt8195: add mt8195-mt6359-rt1011-rt5682 bindings documentTrevor Wu1-0/+47
This patch adds document for mt8195 board with mt6359, rt1011 and rt5682 Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Link: https://lore.kernel.org/r/20211020071428.14297-3-trevor.wu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-29ASoC: mediatek: mt8195: add machine driver with mt6359, rt1011 and rt5682Trevor Wu3-0/+1171
This patch adds support for mt8195 board with mt6359, rt1011 and rt5682. Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Link: https://lore.kernel.org/r/20211020071428.14297-2-trevor.wu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-29ASoC: Stop dummy from overriding hwparamsAmadeusz Sławiński1-0/+13
In case that there are other components assigned to runtime device, depending on order dummy component can override their params with its own, which shouldn't happen. Check if there are any other components assigned to rtd and if so, skip setting hwparams. Occurs when using topology where 'snd-soc-dummy' gets assigned by default as codec and platform component. Alternative approach would be to copy whole dummy handling and rename it to "snd-soc-null" or something similar. And remove hwparams assignment to make it really do nothing. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20211015161257.27052-7-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-29ASoC: topology: Change topology device to card deviceAmadeusz Sławiński1-3/+3
Topology needs device for prints and resource allocation. So far, component->dev is used. However, this may lead to high memory use in model where card is an independent driver which can be reloaded and topology is loaded from component's probe() method. Every time machine driver is reloaded topology is being loaded anew, each time allocating new memory. Said memory will only be freed when component itself is being freed. Address the problem by tying topology to component->card->dev instead, so memory occupied by the topology is freed whenever related machine device gets removed. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20211015161257.27052-6-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-29ASoC: topology: Use correct device for printsAmadeusz Sławiński1-1/+1
soc_tplg_add_dcontrol() passes device as argument which is later used to print messages. Align it with all other prints in file to use tplg->dev. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20211015161257.27052-5-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-29ASoC: topology: Check for dapm widget completenessAmadeusz Sławiński1-0/+17
Add sanity checks to make sure the data is read within file boundary. Helps in situations where file is only partially copied or malformed. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20211015161257.27052-4-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-29ASoC: topology: Add header payload_size verificationCezary Rojewski1-0/+9
Add sanity check to make sure the data is read within file boundary. Helps in situations where file is only partially copied or malformed. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20211015161257.27052-3-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-29ASoC: core: Remove invalid snd_soc_component_set_jack callAmadeusz Sławiński1-3/+0
If snd_soc_component_set_jack() is called after snd_soc_component_remove() it may operate on memory which is freed in ->remove handler. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20211015161257.27052-2-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-29ASoC: codecs: tfa989x: Add support for tfa9897 RCV bitVincent Knecht1-0/+21
TFA9897 has an internal 'rcv' switch so that it can manage both loudspeaker and earpiece modes with the same physical speaker. Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Link: https://lore.kernel.org/r/20211024085840.1536438-3-vincent.knecht@mailoo.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-29ASoC: amd: acp: select CONFIG_SND_SOC_ACPIArnd Bergmann1-0/+1
The acp-platform driver now needs the ACPI helpers: ld.lld: error: undefined symbol: snd_soc_acpi_find_machine >>> referenced by acp-platform.c >>> soc/amd/acp/acp-platform.o:(acp_machine_select) in archive sound/built-in.a ld.lld: error: undefined symbol: snd_soc_acpi_codec_list >>> referenced by acp-renoir.c >>> soc/amd/acp/acp-renoir.o:(snd_soc_acpi_amd_acp_machines) in archive sound/built-in.a Other drivers using this interface, select SND_SOC_ACPI, so do the same thing here. Fixes: e646b51f5dd5 ("ASoC: amd: acp: Add callback for machine driver on ACP") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211029113714.966823-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-29Merge series "ASoC: cs42l42: Fix definition and handling of jack switch ↵Mark Brown2-11/+11
invert" from Richard Fitzgerald <rf@opensource.cirrus.com>: Summary: The driver applied the opposite of the DT setting to the wrong register bit. The jack plug detect hardware in cs42l42 is somewhat confusing, compounded by an unclear description in the datasheet. This is most likely the reason that the driver implemented a DT property for the wrong register bit, that had the opposite effect of what was described in the binding. Changing the meaning of the property values isn't feasible; the driver dates from 2016 and the risk of breaking out-of-tree configs is too high (the property is also available to ACPI systems). So the fix is to make the binding doc match the actual behaviour and then fix the driver to apply it to the correct register bit. As a bonus, patch #3 converts the binding to yaml. Richard Fitzgerald (3): ASoC: dt-bindings: cs42l42: Correct description of ts-inv ASoC: cs42l42: Correct configuring of switch inversion from ts-inv ASoC: dt-bindings: cs42l42: Convert binding to yaml .../devicetree/bindings/sound/cirrus,cs42l42.yaml | 225 +++++++++++++++++++++ .../devicetree/bindings/sound/cs42l42.txt | 114 ----------- MAINTAINERS | 1 + sound/soc/codecs/cs42l42.c | 9 +- 4 files changed, 230 insertions(+), 119 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/cirrus,cs42l42.yaml delete mode 100644 Documentation/devicetree/bindings/sound/cs42l42.txt -- 2.11.0
2021-10-29ASoC: Intel: glk_rt5682_max98357a: support ALC5682I-VS codecBrent Lu3-9/+52
Detect the codec variant in probe function and update DAI link accordingly. Also add an new entry in enumeration table for machine driver enumeration. Signed-off-by: Brent Lu <brent.lu@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20211028140909.496022-1-brent.lu@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-29ASoC: fix unmet dependencies on GPIOLIB for SND_SOC_RT1015PJulian Braha1-4/+4
When SND_SOC_MT8192_MT6359_RT1015_RT5682, SND_SOC_MT8192_MT6359_RT1015_RT5682, SND_SOC_MT8183_DA7219_MAX98357A, or SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A is selected, and GPIOLIB is not selected, Kbuild gives the following warnings, respectively: WARNING: unmet direct dependencies detected for SND_SOC_DMIC Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n] Selected by [y]: - SND_SOC_MT8192_MT6359_RT1015_RT5682 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && I2C [=y] && SND_SOC_MT8192 [=y] && MTK_PMIC_WRAP [=y] WARNING: unmet direct dependencies detected for SND_SOC_RT1015P Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n] Selected by [y]: - SND_SOC_MT8192_MT6359_RT1015_RT5682 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && I2C [=y] && SND_SOC_MT8192 [=y] && MTK_PMIC_WRAP [=y] WARNING: unmet direct dependencies detected for SND_SOC_RT1015P Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n] Selected by [y]: - SND_SOC_MT8183_DA7219_MAX98357A [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_MT8183 [=y] && I2C [=y] WARNING: unmet direct dependencies detected for SND_SOC_RT1015P Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n] Selected by [y]: - SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && I2C [=y] && SND_SOC_MT8183 [=y] This is because these config options select SND_SOC_RT1015P without selecting or depending on GPIOLIB, despite SND_SOC_RT1015P depending on GPIOLIB. These unmet dependency bugs were detected by Kismet, a static analysis tool for Kconfig. Please advise if this is not the appropriate solution. Signed-off-by: Julian Braha <julianbraha@gmail.com> Acked-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20211029001225.27218-1-julianbraha@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-29ASoC: es8316: add support for ESSX8336 ACPI _HIDPierre-Louis Bossart1-0/+1
The same codec seems to have different personalities. ESSX8316 was used for Baytrail/CherryTrail, ESSX8336 seems to be used for AppoloLake, GeminiLake, JasperLake and TigerLake devices. BugLink: https://github.com/thesofproject/linux/issues/2955 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>-e Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20211029011109.23633-1-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-29ASoC: cs42l42: Correct configuring of switch inversion from ts-invRichard Fitzgerald1-5/+4
The setting from the cirrus,ts-inv property should be applied to the TIP_SENSE_INV bit, as this is the one that actually affects the jack detect block. The TS_INV bit only swaps the meaning of the PLUG and UNPLUG interrupts and should always be 1 for the interrupts to have the normal meaning. Due to some misunderstanding the driver had been implemented to configure the TS_INV bit based on the jack switch polarity. This made the interrupts behave the correct way around, but left the jack detect block, button detect and analogue circuits always interpreting an open switch as unplugged. The signal chain inside the codec is: SENSE pin -> TIP_SENSE_INV -> TS_INV -> (invert) -> interrupts | v Jack detect, button detect and analog control As the TIP_SENSE_INV already performs the necessary inversion the TS_INV bit never needs to change. It must always be 1 to yield the expected interrupt behaviour. Some extra confusion has arisen because of the additional invert in the interrupt path, meaning that a value applied to the TS_INV bit produces the opposite effect of applying it to the TIP_SENSE_INV bit. The ts-inv property has therefore always had the opposite effect to what might be expected (0 = inverted, 1 = not inverted). To maintain the meaning of the ts-inv property it must be inverted when applied to TIP_SENSE_INV. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec") Link: https://lore.kernel.org/r/20211028140902.11786-3-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-29ASoC: dt-bindings: cs42l42: Correct description of ts-invRichard Fitzgerald1-6/+7
This swaps the descriptions of the 0 and 1 values to match what the driver actually does with this property. The background here is somewhat confusing. The codec has two invert bits for the tip sense. The DT property should have been for the TIP_SENSE_INV bit, which is the one that controls the detect block. Due to some misunderstanding of the hardware the driver actually implemented setting of the TS_INV bit, which is only for swapping the sense of the interrupt bits. The description was taken from the datasheet and refers to TIP_SENSE_INV but unfortunately TS_INV has a different purpose and the net effect of changing it is the reverse of what was intended (this is not clearly described in the datasheet). So the ts-inv settings have always done the exact opposite of what the description said. Given the age of the driver, it's too late now to swap the meanings of the values, so the description is changed to match the behaviour. They have been annotated with the terminology used in the datasheet to avoid the confusion of which one corresponds to what the datasheet calls "inverted tip sense". Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: da16c5579353 ("ASoC: cs42l42: Add devicetree bindings for CS42L42") Link: https://lore.kernel.org/r/20211028140902.11786-2-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-29ALSA: firewire-motu: remove TODO for interaction with userspace about ↵Takashi Sakamoto1-2/+0
control message Now UAPI of ALSA firewire stack got enough functions to interact with userspace for protocol of MOTU FireWire series. Let's remove the relevant TODO. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20211029012847.11839-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-28ALSA: oxfw: fix functional regression for Mackie Onyx 1640i in v5.14 or laterTakashi Sakamoto3-1/+19
A user reports functional regression for Mackie Onyx 1640i that the device generates slow sound with ALSA oxfw driver which supports media clock recovery. Although the device is based on OXFW971 ASIC, it does not transfer isochronous packet with own event frequency as expected. The device seems to adjust event frequency according to events in received isochronous packets in the beginning of packet streaming. This is unknown quirk. This commit fixes the regression to turn the recovery off in driver side. As a result, nominal frequency is used in duplex packet streaming between device and driver. For stability of sampling rate in events of transferred isochronous packet, 4,000 isochronous packets are skipped in the beginning of packet streaming. Reference: https://github.com/takaswie/snd-firewire-improve/issues/38 Fixes: 029ffc429440 ("ALSA: oxfw: perform sequence replay for media clock recovery") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20211028130325.45772-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-28ASoC: qdsp6: audioreach: Fix clang -Wimplicit-fallthroughNathan Chancellor1-1/+1
Clang warns: sound/soc/qcom/qdsp6/topology.c:465:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] default: ^ sound/soc/qcom/qdsp6/topology.c:465:3: note: insert 'break;' to avoid fall-through default: ^ break; 1 warning generated. Clang is a little more pedantic than GCC, which permits implicit fallthroughs to cases that contain just break or return. Clang's version is more in line with the kernel's own stance in deprecated.rst, which states that all switch/case blocks must end in either break, fallthrough, continue, goto, or return. Add the missing break to fix the warning. Link: https://github.com/ClangBuiltLinux/linux/issues/1495 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20211027190823.4057382-1-nathan@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-28ASoC: fix unmet dependencies on GPIOLIB for SND_SOC_DMICJulian Braha1-2/+2
When SND_SOC_AMD_RENOIR_MACH or SND_SOC_AMD_RV_RT5682_MACH are selected, and GPIOLIB is not selected, Kbuild gives the following warnings, respectively: WARNING: unmet direct dependencies detected for SND_SOC_DMIC Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n] Selected by [y]: - SND_SOC_AMD_RENOIR_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_AMD_RENOIR [=y] and WARNING: unmet direct dependencies detected for SND_SOC_MAX98357A Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n] Selected by [y]: - SND_SOC_AMD_RV_RT5682_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_AMD_ACP3x [=y] && I2C [=y] && CROS_EC [=y] This is because SND_SOC_DMIC and SND_SOC_MAX98357A are selected by SND_SOC_AMD_RV_RT5682_MACH and SND_SOC_AMD_RENOIR_MACH, respectively. However, neither of the selectors depend on or select GPIOLIB, despite their selectees depending on GPIOLIB. These unmet dependency bugs were detected by Kismet, a static analysis tool for Kconfig. Please advise if this is not the appropriate solution. Signed-off-by: Julian Braha <julianbraha@gmail.com> Link: https://lore.kernel.org/r/20211027184835.112916-1-julianbraha@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-28ALSA: firewire-motu: export meter information to userspace as float valueTakashi Sakamoto2-5/+10
In command DSP models, one meter information consists of 4 bytes for IEEE 764 floating point (binary32). In previous patch, it is exported to userspace as 32 bit storage since the storage is also handled in ALSA firewire-motu driver as well in kernel space in which floating point arithmetic is not preferable. On the other hand, ALSA firewire-motu driver doesn't perform floating point calculation. The driver just gather meter information from isochronous packets and fill structure fields for userspace. In 'header' target of Kbuild, UAPI headers are processed before installed. In this timing, #ifdef macro with __KERNEL__ is removed. This mechanism is useful in the case so that the 32 bit storage can be accessible as u32 type in kernel space and float type in user space. We can see the same usage in ''struct acct_v3' in 'include/uapi/linux/acct.h'. This commit is for the above idea. Additionally, due to message protocol, meter information is filled with 0xffffffff in the end of period but 0xffffffff is invalid as binary32. To avoid confusion in userspace application, the last two elements are left without any assignment. Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20211027125529.54295-4-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-28ALSA: firewire-motu: refine parser for meter information in register DSP modelsTakashi Sakamoto2-6/+13
After further investigation, I realize that the total number of elements in array is not enough to store all of related messages from device. This commit refines meter array and message parser. In terms of channel identifier, register DSP models are classified to two categories: 1. the target of output is selectable 828mk2, 896hd, and Traveler are in the category. They transfer messages with channel identifier between 0x00 and 0x13 for input meters, therefore 20 elements are needed to store. On the other hand, they transfer messages with channel identifier for one pair of output meters. The selection is done by asynchronous write transaction to offset 0x'ffff'f000'0b2c. The table for relationship between written value and available identifiers is below: ============= =============== written value identifier pair ============= =============== 0x00000b00 0x80/0x81 0x00000b01 0x82/0x83 ... ... 0x00000b0b 0x96/0x97 ... ... 0x00000b10 0xa0/0xa1 ... ... 0x00000b3f 0xfe/0xff ... ... greater 0xfe/0xff ============= =============== Actually in the above three models, 0x96/0x97 pair is the maximum. Thus the number of available output meter is 24. 2. all of output is available 8 pre, Ultralite, Audio Express, and 4 pre are in the category. They transfer messages for output meters without any selection. The table for available identifier for each direction is below: ============== ========= ========== model input output ============== ========= ========== 8 pre 0x00-0x0f 0x82-0x8d Ultralite 0x00-0x09 0x82-0x8f Audio Express 0x00-0x09 0x80-0x8d 4 pre 0x00-0x09 0x80-0x8d ============== ========= ========== Some of available identifiers might not be used for actual output meters. Anyway, 24 plus 24 elements accommodate the input/output meters. I note that isochronous packet from V3HD/V4HD deliver no message. Notification by asynchronous transaction to registered address seems to be used for the purpose as well as for change of mixer parameter. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20211027125529.54295-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-28ALSA: firewire-motu: fix null pointer dereference when polling hwdep ↵Takashi Sakamoto1-5/+11
character device ALSA firewire-motu driver recently got support for event notification via ALSA HwDep interface for register DSP models. However, when polling ALSA HwDep cdev, the driver can cause null pointer dereference for the other models due to accessing to unallocated memory or uninitialized memory. This commit fixes the bug by check the type of model before accessing to the memory. Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Takashi Iwai <tiwai@suse.de> Fixes: 634ec0b2906e ("ALSA: firewire-motu: notify event for parameter change in register DSP model") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20211027125529.54295-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-28ALSA: hda/realtek: Add a quirk for HP OMEN 15 mute LEDTakashi Iwai1-0/+1
HP OMEN 15 laptop requires the quirk to fiddle with COEF 0x0b bit 2 for toggling the mute LED. It's already implemented for other HP laptops, and we just need to add a proper fixup entry. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214735 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211028070911.18891-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-27ASoC: amd: acp: fix Kconfig dependenciesArnd Bergmann1-1/+3
The CONFIG_SND_SOC_AMD_MACH_COMMON has some dependencies that are not checked by the symbols that select it: WARNING: unmet direct dependencies detected for SND_SOC_AMD_MACH_COMMON Depends on [n]: SOUND [=y] && !UML && SND [=m] && SND_SOC [=m] && X86 && PCI [=y] && I2C [=n] Selected by [m]: - SND_SOC_AMD_LEGACY_MACH [=m] && SOUND [=y] && !UML && SND [=m] && SND_SOC [=m] - SND_SOC_AMD_SOF_MACH [=m] && SOUND [=y] && !UML && SND [=m] && SND_SOC [=m] WARNING: unmet direct dependencies detected for SND_SOC_AMD_MACH_COMMON Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && X86 && PCI [=n] && I2C [=m] Selected by [m]: - SND_SOC_AMD_LEGACY_MACH [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] Make this more consistent by adding the same checks everywhere. Fixes: 9d8a7be88b33 ("ASoC: amd: acp: Add legacy sound card support for Chrome audio") Fixes: 9f84940f5004 ("ASoC: amd: acp: Add SOF audio support on Chrome board") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211027082359.52248-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-27Merge series "Make genaral and simple for new sof machine driver" from David ↵Mark Brown1-2/+46
Lin <CTLIN0@nuvoton.com>: The series of features will make general and simple for new sof machine driver. David Lin (2): ASoC: nau8825: add set_jack coponment support ASoC: nau8825: add clock management for power saving sound/soc/codecs/nau8825.c | 48 ++++++++++++++++++++++++++++++++++++-- 1 file changed, 46 insertions(+), 2 deletions(-)
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-31 21:35:45 +0000