summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-01-03remoteproc: stm32: Improve crash recovery timeArnaud Pouliquen1-1/+1
When a stop is requested on a crash, it is useless to try to shutdown it gracefully, it is crashed. In this case don't send the STM32_MBX_SHUTDOWN mailbox message that will block the recovery during 500 ms, waiting an answer from the coprocessor. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Link: https://lore.kernel.org/r/20211221143129.18415-1-arnaud.pouliquen@foss.st.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2021-12-20remoteproc: rcar_rproc: Remove trailing semicolonJulien Massot1-1/+1
Remove trailing semicolon. Signed-off-by: Julien Massot <julien.massot@iot.bzh> Link: https://lore.kernel.org/r/20211216160721.203794-1-julien.massot@iot.bzh Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2021-12-20remoteproc: rcar_rproc: Fix pm_runtime_get_sync error checkJulien Massot1-1/+1
pm_runtime_get_sync can also return 1 on success, change to use pm_runtime_resume_and_get which return 0 only on success. This bug has been discovered by Dan Carpenter by using Smatch static checker. Fixes: 285892a74f13 ("remoteproc: Add Renesas rcar driver") Signed-off-by: Julien Massot <julien.massot@iot.bzh> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> [Fixed blank line between tags] Link: https://lore.kernel.org/r/20211216160653.203768-1-julien.massot@iot.bzh Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2021-12-13remoteproc: qcom: pas: Add SM6350 CDSP supportLuca Weiss1-0/+18
Add a config for the CDSP present on SM6350. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213082208.21492-7-luca.weiss@fairphone.com
2021-12-13remoteproc: qcom: pas: Add SM6350 ADSP supportLuca Weiss1-0/+18
Add a config for the ADSP present on SM6350. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213082208.21492-5-luca.weiss@fairphone.com
2021-12-13remoteproc: qcom: pas: Add SM6350 MPSS supportLuca Weiss1-0/+1
Add a config for the MPSS present on SM6350. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213082208.21492-3-luca.weiss@fairphone.com
2021-12-13dt-bindings: remoteproc: qcom: pas: Add SM6350 adsp, cdsp & mpssLuca Weiss1-0/+28
Add compatibles for the remoteprocs found in SM6350. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Acked-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213082208.21492-2-luca.weiss@fairphone.com
2021-12-13remoteproc: qcom: pas: Add missing power-domain "mxc" for CDSPSibi Sankar1-0/+1
Add missing power-domain "mxc" required by CDSP PAS remoteproc on SM8350 SoC. Fixes: e8b4e9a21af7 ("remoteproc: qcom: pas: Add SM8350 PAS remoteprocs") Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Cc: stable@vger.kernel.org Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1624559605-29847-1-git-send-email-sibis@codeaurora.org
2021-12-13remoteproc: imx_rproc: correct firmware reloadPeng Fan1-3/+5
ENABLE_M4 should be set to 1 when loading code to TCM, otherwise you will not able to replace the firmware after you stop m4. Besides ENABLE_M4, we still need set SW_M4C_RST, because this bit will be automatically set with SW_M4C_NON_SCLR_RST set. Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210602064206.27004-1-peng.fan@oss.nxp.com
2021-12-13remoteproc: qcom: pil_info: Don't memcpy_toio more than is providedStephen Boyd1-1/+1
If the string passed into qcom_pil_info_store() isn't as long as PIL_RELOC_NAME_LEN we'll try to copy the string assuming the length is PIL_RELOC_NAME_LEN to the io space and go beyond the bounds of the string. Let's only copy as many byes as the string is long, ignoring the NUL terminator. This fixes the following KASAN error: BUG: KASAN: global-out-of-bounds in __memcpy_toio+0x124/0x140 Read of size 1 at addr ffffffd35086e386 by task rmtfs/2392 CPU: 2 PID: 2392 Comm: rmtfs Tainted: G W 5.16.0-rc1-lockdep+ #10 Hardware name: Google Lazor (rev3+) with KB Backlight (DT) Call trace: dump_backtrace+0x0/0x410 show_stack+0x24/0x30 dump_stack_lvl+0x7c/0xa0 print_address_description+0x78/0x2bc kasan_report+0x160/0x1a0 __asan_report_load1_noabort+0x44/0x50 __memcpy_toio+0x124/0x140 qcom_pil_info_store+0x298/0x358 [qcom_pil_info] q6v5_start+0xdf0/0x12e0 [qcom_q6v5_mss] rproc_start+0x178/0x3a0 rproc_boot+0x5f0/0xb90 state_store+0x78/0x1bc dev_attr_store+0x70/0x90 sysfs_kf_write+0xf4/0x118 kernfs_fop_write_iter+0x208/0x300 vfs_write+0x55c/0x804 ksys_pwrite64+0xc8/0x134 __arm64_compat_sys_aarch32_pwrite64+0xc4/0xdc invoke_syscall+0x78/0x20c el0_svc_common+0x11c/0x1f0 do_el0_svc_compat+0x50/0x60 el0_svc_compat+0x5c/0xec el0t_32_sync_handler+0xc0/0xf0 el0t_32_sync+0x1a4/0x1a8 The buggy address belongs to the variable: .str.59+0x6/0xffffffffffffec80 [qcom_q6v5_mss] Memory state around the buggy address: ffffffd35086e280: 00 00 00 00 02 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffd35086e300: 00 02 f9 f9 f9 f9 f9 f9 00 00 00 06 f9 f9 f9 f9 >ffffffd35086e380: 06 f9 f9 f9 05 f9 f9 f9 00 00 00 00 00 06 f9 f9 ^ ffffffd35086e400: f9 f9 f9 f9 01 f9 f9 f9 04 f9 f9 f9 00 00 01 f9 ffffffd35086e480: f9 f9 f9 f9 00 00 00 00 00 00 00 01 f9 f9 f9 f9 Fixes: 549b67da660d ("remoteproc: qcom: Introduce helper to store pil info in IMEM") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211117065454.4142936-1-swboyd@chromium.org
2021-12-13remoteproc: Add Renesas rcar driverJulien Massot3-0/+236
Renesas Gen3 platform includes a Cortex-r7 processor. Both: the application cores (A5x) and the realtime core (CR7) share access to the RAM and devices with the same address map, so device addresses are equal to the Linux physical addresses. In order to initialize this remote processor we need to: - power on the realtime core - put the firmware in a RAM area - set the boot address for this firmware (reset vector) - Deassert the reset This initial driver allows to start and stop the Cortex R7 processor. Signed-off-by: Julien Massot <julien.massot@iot.bzh> Link: https://lore.kernel.org/r/20211207165829.195537-3-julien.massot@iot.bzh Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2021-12-13dt-bindings: remoteproc: Add Renesas R-CarJulien Massot1-0/+65
Renesas R-Car SoCs may contain a Realtime processor. This patch adds bindings for this remote processor. Signed-off-by: Julien Massot <julien.massot@iot.bzh> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20211207165829.195537-2-julien.massot@iot.bzh Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2021-12-13Merge tag 'rcar_rst_rproc-tag1' of ↵Mathieu Poirier2-3/+42
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into rproc-next Renesas R-Car Reset Controller remoteproc API Definition of rcar_rst_set_rproc_boot_addr(), to be consumed by the Renesas R-Car Gen3 remote processor driver. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2021-12-08remoteproc: Fix remaining wrong return formatting in documentationArnaud Pouliquen2-3/+3
kernel documentation specification: "The return value, if any, should be described in a dedicated section named Return." Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211206191858.10741-1-arnaud.pouliquen@foss.st.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2021-12-08MAINTAINERS: Removing Ohad from remoteproc/rpmsg maintenanceMathieu Poirier2-2/+5
Ohad has not reviewed patches in the remoteproc and rpmsg subsystems for several years now: $ git log --no-merges --format=email drivers/remoteproc/ drivers/rpmsg/ | \ grep -Pi "^Subject:|^Date:|^[\w\-]+-by:.*ohad*" | grep -B2 ohad Date: Wed, 16 Sep 2015 07:32:54 -0500 Subject: [PATCH] remoteproc/wkup_m3: Use MODULE_DEVICE_TABLE to export alias Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Date: Fri, 28 Aug 2015 18:08:19 -0700 Subject: [PATCH] remoteproc: report error if resource table doesn't exist Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> -- Date: Wed, 16 Sep 2015 19:29:18 -0500 Subject: [PATCH] remoteproc: fix memory leak of remoteproc ida cache layers Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Date: Fri, 20 Nov 2015 18:26:07 +0100 Subject: [PATCH] remoteproc: avoid stack overflow in debugfs file Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Date: Thu, 18 Jun 2015 11:44:41 +0300 Subject: [PATCH] remoteproc: fix !CONFIG_OF build breakage Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Date: Fri, 22 May 2015 15:45:30 -0500 Subject: [PATCH] remoteproc/wkup_m3: add a remoteproc driver for TI Wakeup M3 Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> As such move his names to the CREDITS file. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20211202171125.903608-1-mathieu.poirier@linaro.org Acked-by: Ohad Ben Cohen <ohad@wizery.com>
2021-12-06remoteproc: ingenic: Request IRQ disabledLars-Peter Clausen1-3/+2
The ingenic remoteproc driver requests its IRQ and then immediately disables it. The disable is necessary since irq_request() normally enables the IRQ. But there is a new flag IRQF_NO_AUTOEN that when specified keeps the IRQ disabled. Use this new flag rather than calling disable_irq(). This slightly reduce the boilerplate code and also avoids a theoretical race condition where the IRQ could fire between irq_request() and disable_irq(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20211205111349.51213-1-lars@metafoo.de Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2021-12-01remoteproc: k3-r5: Extend support for R5F clusters on J721S2 SoCsHari Nagalla1-2/+3
The K3 J721S2 SoCs have three dual-core R5F subsystems, one in MCU voltage domain and the other two in MAIN voltage domain. These R5F clusters are similar to the R5F clusters in J7200 SoCs. Compatible Info is updated to support J721S2 SoCs. Signed-off-by: Hari Nagalla <hnagalla@ti.com> Link: https://lore.kernel.org/r/20211122122726.8532-5-hnagalla@ti.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2021-12-01remoteproc: k3-dsp: Extend support for C71x DSPs on J721S2 SoCsHari Nagalla1-0/+1
The K3 J721S2 SoCs have two C71x DSP subsystems in MAIN voltage domain, and there are no C66x DSP subsystems on these SoCs. The C71x DSP subsystem is a slighly updated version of the C71x DSP subsystem on J721e. The C71x DSPs are 64 bit machine with fixed and floating point DSP operations. Extend support to the C71x DSPs with J721S2 compatible strings. Signed-off-by: Hari Nagalla <hnagalla@ti.com> Link: https://lore.kernel.org/r/20211122122726.8532-4-hnagalla@ti.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2021-12-01dt-bindings: remoteproc: k3-dsp: Update bindings for J721S2 SoCsHari Nagalla1-0/+3
The TI K3 J721S2 SoCs have two TMS320C71x DSP subsystems, and does not have any TMS320C66x DSP subsystems. The C71x DSP subsystem in J721S2 SoCs is a similar to the C71x DSP on J721e with some minor core IP updates. Compatible info is updated for intuitvely matching to the new J721S2 SoCs. Signed-off-by: Hari Nagalla <hnagalla@ti.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211122122726.8532-3-hnagalla@ti.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2021-12-01dt-bindings: remoteproc: k3-r5f: Update bindings for J721S2 SoCsHari Nagalla1-3/+5
The TI K3 J721S2 SoCs have three dual-core Arm R5F clusters/subsystems, with 2 R5F cores each, one in MCU voltage domain and the other two in MAIN voltage domain. These clusters are similar to J7200 R5F clusters. Compatible info is updated for intuitively matching to the new J721S2 SoCs. Signed-off-by: Hari Nagalla <hnagalla@ti.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211122122726.8532-2-hnagalla@ti.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2021-11-17remoteproc: coredump: Correct argument 2 type for memcpy_fromioPeng Fan1-1/+1
Address the sparse check warning: >> drivers/remoteproc/remoteproc_coredump.c:169:53: sparse: warning: incorrect type in argument 2 (different address spaces) sparse: expected void const volatile [noderef] __iomem *src sparse: got void *[assigned] ptr Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20211110032101.517487-1-peng.fan@oss.nxp.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2021-11-17remoteproc: imx_rproc: Fix a resource leak in the remove functionChristophe JAILLET1-0/+1
'priv->workqueue' is destroyed in the error handling path of the probe but not in the remove function. Add the missing call to release some resources. Cc: stable <stable@vger.kernel.org> Fixes: 2df7062002d0 ("remoteproc: imx_proc: enable virtio/mailbox") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Peng Fan <peng.fan@nxp.com> Tested-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/d28ca94a4031bd7297d47c2164e18885a5a6ec19.1634366546.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2021-11-17remoteproc: Use %pe format string to print return error codeMark-PK Tsai1-2/+2
Use %pe format string to print return error code which make the error message easier to understand. Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Link: https://lore.kernel.org/r/20211102141535.28372-1-mark-pk.tsai@mediatek.com Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> [Fixed capital letter in subject line] Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2021-11-15soc: renesas: rcar-rst: Add support to set rproc boot addressJulien Massot2-3/+42
R-Car Gen3 SoC series has a realtime processor, the boot address of this processor can be set thanks to CR7BAR register of the reset module. Export this function so that it's possible to set the boot address from a remoteproc driver. Also drop the __initdata qualifier on rcar_rst_base, since we will use this address later than init time. Signed-off-by: Julien Massot <julien.massot@iot.bzh> Link: https://lore.kernel.org/r/20211022122101.66998-1-julien.massot@iot.bzh Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-14Linux 5.16-rc1v5.16-rc1Linus Torvalds1-2/+2
2021-11-14kconfig: Add support for -Wimplicit-fallthroughGustavo A. R. Silva2-5/+6
Add Kconfig support for -Wimplicit-fallthrough for both GCC and Clang. The compiler option is under configuration CC_IMPLICIT_FALLTHROUGH, which is enabled by default. Special thanks to Nathan Chancellor who fixed the Clang bug[1][2]. This bugfix only appears in Clang 14.0.0, so older versions still contain the bug and -Wimplicit-fallthrough won't be enabled for them, for now. This concludes a long journey and now we are finally getting rid of the unintentional fallthrough bug-class in the kernel, entirely. :) Link: https://github.com/llvm/llvm-project/commit/9ed4a94d6451046a51ef393cd62f00710820a7e8 [1] Link: https://bugs.llvm.org/show_bug.cgi?id=51094 [2] Link: https://github.com/KSPP/linux/issues/115 Link: https://github.com/ClangBuiltLinux/linux/issues/236 Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-14Merge tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds4-7/+12
Pull xfs cleanups from Darrick Wong: "The most 'exciting' aspect of this branch is that the xfsprogs maintainer and I have worked through the last of the code discrepancies between kernel and userspace libxfs such that there are no code differences between the two except for #includes. IOWs, diff suffices to demonstrate that the userspace tools behave the same as the kernel, and kernel-only bits are clearly marked in the /kernel/ source code instead of just the userspace source. Summary: - Clean up open-coded swap() calls. - A little bit of #ifdef golf to complete the reunification of the kernel and userspace libxfs source code" * tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: sync xfs_btree_split macros with userspace libxfs xfs: #ifdef out perag code for userspace xfs: use swap() to make dabtree code cleaner
2021-11-14Merge tag 'for-5.16/parisc-3' of ↵Linus Torvalds5-6/+14
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull more parisc fixes from Helge Deller: "Fix a build error in stracktrace.c, fix resolving of addresses to function names in backtraces, fix single-stepping in assembly code and flush userspace pte's when using set_pte_at()" * tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc/entry: fix trace test in syscall exit path parisc: Flush kernel data mapping in set_pte_at() when installing pte for user page parisc: Fix implicit declaration of function '__kernel_text_address' parisc: Fix backtrace to always include init funtion names
2021-11-14Merge tag 'sh-for-5.16' of git://git.libc.org/linux-shLinus Torvalds21-180/+78
Pull arch/sh updates from Rich Felker. * tag 'sh-for-5.16' of git://git.libc.org/linux-sh: sh: pgtable-3level: Fix cast to pointer from integer of different size sh: fix READ/WRITE redefinition warnings sh: define __BIG_ENDIAN for math-emu sh: math-emu: drop unused functions sh: fix kconfig unmet dependency warning for FRAME_POINTER sh: Cleanup about SPARSE_IRQ sh: kdump: add some attribute to function maple: fix wrong return value of maple_bus_init(). sh: boot: avoid unneeded rebuilds under arch/sh/boot/compressed/ sh: boot: add intermediate vmlinux.bin* to targets instead of extra-y sh: boards: Fix the cacography in irq.c sh: check return code of request_irq sh: fix trivial misannotations
2021-11-14Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds2-13/+13
Pull ARM fixes from Russell King: - Fix early_iounmap - Drop cc-option fallbacks for architecture selection * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9156/1: drop cc-option fallbacks for architecture selection ARM: 9155/1: fix early early_iounmap()
2021-11-14Merge tag 'devicetree-fixes-for-5.16-1' of ↵Linus Torvalds107-277/+277
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Two fixes due to DT node name changes on Arm, Ltd. boards - Treewide rename of Ingenic CGU headers - Update ST email addresses - Remove Netlogic DT bindings - Dropping few more cases of redundant 'maxItems' in schemas - Convert toshiba,tc358767 bridge binding to schema * tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: watchdog: sunxi: fix error in schema bindings: media: venus: Drop redundant maxItems for power-domain-names dt-bindings: Remove Netlogic bindings clk: versatile: clk-icst: Ensure clock names are unique of: Support using 'mask' in making device bus id dt-bindings: treewide: Update @st.com email address to @foss.st.com dt-bindings: media: Update maintainers for st,stm32-hwspinlock.yaml dt-bindings: media: Update maintainers for st,stm32-cec.yaml dt-bindings: mfd: timers: Update maintainers for st,stm32-timers dt-bindings: timer: Update maintainers for st,stm32-timer dt-bindings: i2c: imx: hardware do not restrict clock-frequency to only 100 and 400 kHz dt-bindings: display: bridge: Convert toshiba,tc358767.txt to yaml dt-bindings: Rename Ingenic CGU headers to ingenic,*.h
2021-11-14Merge tag 'timers-urgent-2021-11-14' of ↵Linus Torvalds3-2/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A single fix for POSIX CPU timers to address a problem where POSIX CPU timer delivery stops working for a new child task because copy_process() copies state information which is only valid for the parent task" * tag 'timers-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-cpu-timers: Clear task::posix_cputimers_work in copy_process()
2021-11-14Merge tag 'irq-urgent-2021-11-14' of ↵Linus Torvalds8-28/+60
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of fixes for the interrupt subsystem Core code: - A regression fix for the Open Firmware interrupt mapping code where a interrupt controller property in a node caused a map property in the same node to be ignored. Interrupt chip drivers: - Workaround a limitation in SiFive PLIC interrupt chip which silently ignores an EOI when the interrupt line is masked. - Provide the missing mask/unmask implementation for the CSKY MP interrupt controller. PCI/MSI: - Prevent a use after free when PCI/MSI interrupts are released by destroying the sysfs entries before freeing the memory which is accessed in the sysfs show() function. - Implement a mask quirk for the Nvidia ION AHCI chip which does not advertise masking capability despite implementing it. Even worse the chip comes out of reset with all MSI entries masked, which due to the missing masking capability never get unmasked. - Move the check which prevents accessing the MSI[X] masking for XEN back into the low level accessors. The recent consolidation missed that these accessors can be invoked from places which do not have that check which broke XEN. Move them back to he original place instead of sprinkling tons of these checks all over the code" * tag 'irq-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: of/irq: Don't ignore interrupt-controller when interrupt-map failed irqchip/sifive-plic: Fixup EOI failed when masked irqchip/csky-mpintc: Fixup mask/unmask implementation PCI/MSI: Destroy sysfs before freeing entries PCI: Add MSI masking quirk for Nvidia ION AHCI PCI/MSI: Deal with devices lying about their MSI mask capability PCI/MSI: Move non-mask check back into low level accessors
2021-11-14Merge tag 'locking-urgent-2021-11-14' of ↵Linus Torvalds3-4/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 static call update from Thomas Gleixner: "A single fix for static calls to make the trampoline patching more robust by placing explicit signature bytes after the call trampoline to prevent patching random other jumps like the CFI jump table entries" * tag 'locking-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: static_call,x86: Robustify trampoline patching
2021-11-14Merge tag 'sched_urgent_for_v5.16_rc1' of ↵Linus Torvalds13-59/+96
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: - Avoid touching ~100 config files in order to be able to select the preemption model - clear cluster CPU masks too, on the CPU unplug path - prevent use-after-free in cfs - Prevent a race condition when updating CPU cache domains - Factor out common shared part of smp_prepare_cpus() into a common helper which can be called by both baremetal and Xen, in order to fix a booting of Xen PV guests * tag 'sched_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: preempt: Restore preemption model selection configs arch_topology: Fix missing clear cluster_cpumask in remove_cpu_topology() sched/fair: Prevent dead task groups from regaining cfs_rq's sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain() x86/smp: Factor out parts of native_smp_prepare_cpus()
2021-11-14Merge tag 'perf_urgent_for_v5.16_rc1' of ↵Linus Torvalds3-6/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Borislav Petkov: - Prevent unintentional page sharing by checking whether a page reference to a PMU samples page has been acquired properly before that - Make sure the LBR_SELECT MSR is saved/restored too - Reset the LBR_SELECT MSR when resetting the LBR PMU to clear any residual data left * tag 'perf_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Avoid put_page() when GUP fails perf/x86/vlbr: Add c->flags to vlbr event constraints perf/x86/lbr: Reset LBR_SELECT during vlbr reset
2021-11-14Merge tag 'x86_urgent_for_v5.16_rc1' of ↵Linus Torvalds8-4/+71
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Add the model number of a new, Raptor Lake CPU, to intel-family.h - Do not log spurious corrected MCEs on SKL too, due to an erratum - Clarify the path of paravirt ops patches upstream - Add an optimization to avoid writing out AMX components to sigframes when former are in init state * tag 'x86_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Add Raptor Lake to Intel family x86/mce: Add errata workaround for Skylake SKX37 MAINTAINERS: Add some information to PARAVIRT_OPS entry x86/fpu: Optimize out sigframe xfeatures when in init state
2021-11-14Merge tag 'perf-tools-for-v5.16-2021-11-13' of ↵Linus Torvalds131-1148/+2639
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: "Hardware tracing: - ARM: * Print the size of the buffer size consistently in hexadecimal in ARM Coresight. * Add Coresight snapshot mode support. * Update --switch-events docs in 'perf record'. * Support hardware-based PID tracing. * Track task context switch for cpu-mode events. - Vendor events: * Add metric events JSON file for power10 platform perf test: - Get 'perf test' unit tests closer to kunit. - Topology tests improvements. - Remove bashisms from some tests. perf bench: - Fix memory leak of perf_cpu_map__new() in the futex benchmarks. libbpf: - Add some more weak libbpf functions o allow building with the libbpf versions, old ones, present in distros. libbeauty: - Translate [gs]setsockopt 'level' argument integer values to strings. tools headers UAPI: - Sync futex_waitv, arch prctl, sound, i195_drm and msr-index files with the kernel sources. Documentation: - Add documentation to 'struct symbol'. - Synchronize the definition of enum perf_hw_id with code in tools/perf/design.txt" * tag 'perf-tools-for-v5.16-2021-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (67 commits) perf tests: Remove bash constructs from stat_all_pmu.sh perf tests: Remove bash construct from record+zstd_comp_decomp.sh perf test: Remove bash construct from stat_bpf_counters.sh test perf bench futex: Fix memory leak of perf_cpu_map__new() tools arch x86: Sync the msr-index.h copy with the kernel sources tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Sync sound/asound.h with the kernel sources tools headers UAPI: Sync linux/prctl.h with the kernel sources tools headers UAPI: Sync arch prctl headers with the kernel sources perf tools: Add more weak libbpf functions perf bpf: Avoid memory leak from perf_env__insert_btf() perf symbols: Factor out annotation init/exit perf symbols: Bit pack to save a byte perf symbols: Add documentation to 'struct symbol' tools headers UAPI: Sync files changed by new futex_waitv syscall perf test bpf: Use ARRAY_CHECK() instead of ad-hoc equivalent, addressing array_size.cocci warning perf arm-spe: Support hardware-based PID tracing perf arm-spe: Save context ID in record perf arm-spe: Update --switch-events docs in 'perf record' perf arm-spe: Track task context switch for cpu-mode events ...
2021-11-14Merge tag 'irqchip-fixes-5.16-1' of ↵Thomas Gleixner3-8/+27
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Address an issue with the SiFive PLIC being unable to EOI a masked interrupt - Move the disable/enable methods in the CSky mpintc to mask/unmask - Fix a regression in the OF irq code where an interrupt-controller property in the same node as an interrupt-map property would get ignored Link: https://lore.kernel.org/all/20211112173459.4015233-1-maz@kernel.org
2021-11-13Merge tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linuxLinus Torvalds76-12941/+27373
Pull zstd update from Nick Terrell: "Update to zstd-1.4.10. Add myself as the maintainer of zstd and update the zstd version in the kernel, which is now 4 years out of date, to a much more recent zstd release. This includes bug fixes, much more extensive fuzzing, and performance improvements. And generates the kernel zstd automatically from upstream zstd, so it is easier to keep the zstd verison up to date, and we don't fall so far out of date again. This includes 5 commits that update the zstd library version: - Adds a new kernel-style wrapper around zstd. This wrapper API is functionally equivalent to the subset of the current zstd API that is currently used. The wrapper API changes to be kernel style so that the symbols don't collide with zstd's symbols. The update to zstd-1.4.10 maintains the same API and preserves the semantics, so that none of the callers need to be updated. All callers are updated in the commit, because there are zero functional changes. - Adds an indirection for `lib/decompress_unzstd.c` so it doesn't depend on the layout of `lib/zstd/` to include every source file. This allows the next patch to be automatically generated. - Imports the zstd-1.4.10 source code. This commit is automatically generated from upstream zstd (https://github.com/facebook/zstd). - Adds me (terrelln@fb.com) as the maintainer of `lib/zstd`. - Fixes a newly added build warning for clang. The discussion around this patchset has been pretty long, so I've included a FAQ-style summary of the history of the patchset, and why we are taking this approach. Why do we need to update? ------------------------- The zstd version in the kernel is based off of zstd-1.3.1, which is was released August 20, 2017. Since then zstd has seen many bug fixes and performance improvements. And, importantly, upstream zstd is continuously fuzzed by OSS-Fuzz, and bug fixes aren't backported to older versions. So the only way to sanely get these fixes is to keep up to date with upstream zstd. There are no known security issues that affect the kernel, but we need to be able to update in case there are. And while there are no known security issues, there are relevant bug fixes. For example the problem with large kernel decompression has been fixed upstream for over 2 years [1] Additionally the performance improvements for kernel use cases are significant. Measured for x86_64 on my Intel i9-9900k @ 3.6 GHz: - BtrFS zstd compression at levels 1 and 3 is 5% faster - BtrFS zstd decompression+read is 15% faster - SquashFS zstd decompression+read is 15% faster - F2FS zstd compression+write at level 3 is 8% faster - F2FS zstd decompression+read is 20% faster - ZRAM decompression+read is 30% faster - Kernel zstd decompression is 35% faster - Initramfs zstd decompression+build is 5% faster On top of this, there are significant performance improvements coming down the line in the next zstd release, and the new automated update patch generation will allow us to pull them easily. How is the update patch generated? ---------------------------------- The first two patches are preparation for updating the zstd version. Then the 3rd patch in the series imports upstream zstd into the kernel. This patch is automatically generated from upstream. A script makes the necessary changes and imports it into the kernel. The changes are: - Replace all libc dependencies with kernel replacements and rewrite includes. - Remove unncessary portability macros like: #if defined(_MSC_VER). - Use the kernel xxhash instead of bundling it. This automation gets tested every commit by upstream's continuous integration. When we cut a new zstd release, we will submit a patch to the kernel to update the zstd version in the kernel. The automated process makes it easy to keep the kernel version of zstd up to date. The current zstd in the kernel shares the guts of the code, but has a lot of API and minor changes to work in the kernel. This is because at the time upstream zstd was not ready to be used in the kernel envrionment as-is. But, since then upstream zstd has evolved to support being used in the kernel as-is. Why are we updating in one big patch? ------------------------------------- The 3rd patch in the series is very large. This is because it is restructuring the code, so it both deletes the existing zstd, and re-adds the new structure. Future updates will be directly proportional to the changes in upstream zstd since the last import. They will admittidly be large, as zstd is an actively developed project, and has hundreds of commits between every release. However, there is no other great alternative. One option ruled out is to replay every upstream zstd commit. This is not feasible for several reasons: - There are over 3500 upstream commits since the zstd version in the kernel. - The automation to automatically generate the kernel update was only added recently, so older commits cannot easily be imported. - Not every upstream zstd commit builds. - Only zstd releases are "supported", and individual commits may have bugs that were fixed before a release. Another option to reduce the patch size would be to first reorganize to the new file structure, and then apply the patch. However, the current kernel zstd is formatted with clang-format to be more "kernel-like". But, the new method imports zstd as-is, without additional formatting, to allow for closer correlation with upstream, and easier debugging. So the patch wouldn't be any smaller. It also doesn't make sense to import upstream zstd commit by commit going forward. Upstream zstd doesn't support production use cases running of the development branch. We have a lot of post-commit fuzzing that catches many bugs, so indiviudal commits may be buggy, but fixed before a release. So going forward, I intend to import every (important) zstd release into the Kernel. So, while it isn't ideal, updating in one big patch is the only patch I see forward. Who is responsible for this code? --------------------------------- I am. This patchset adds me as the maintainer for zstd. Previously, there was no tree for zstd patches. Because of that, there were several patches that either got ignored, or took a long time to merge, since it wasn't clear which tree should pick them up. I'm officially stepping up as maintainer, and setting up my tree as the path through which zstd patches get merged. I'll make sure that patches to the kernel zstd get ported upstream, so they aren't erased when the next version update happens. How is this code tested? ------------------------ I tested every caller of zstd on x86_64 (BtrFS, ZRAM, SquashFS, F2FS, Kernel, InitRAMFS). I also tested Kernel & InitRAMFS on i386 and aarch64. I checked both performance and correctness. Also, thanks to many people in the community who have tested these patches locally. Lastly, this code will bake in linux-next before being merged into v5.16. Why update to zstd-1.4.10 when zstd-1.5.0 has been released? ------------------------------------------------------------ This patchset has been outstanding since 2020, and zstd-1.4.10 was the latest release when it was created. Since the update patch is automatically generated from upstream, I could generate it from zstd-1.5.0. However, there were some large stack usage regressions in zstd-1.5.0, and are only fixed in the latest development branch. And the latest development branch contains some new code that needs to bake in the fuzzer before I would feel comfortable releasing to the kernel. Once this patchset has been merged, and we've released zstd-1.5.1, we can update the kernel to zstd-1.5.1, and exercise the update process. You may notice that zstd-1.4.10 doesn't exist upstream. This release is an artifical release based off of zstd-1.4.9, with some fixes for the kernel backported from the development branch. I will tag the zstd-1.4.10 release after this patchset is merged, so the Linux Kernel is running a known version of zstd that can be debugged upstream. Why was a wrapper API added? ---------------------------- The first versions of this patchset migrated the kernel to the upstream zstd API. It first added a shim API that supported the new upstream API with the old code, then updated callers to use the new shim API, then transitioned to the new code and deleted the shim API. However, Cristoph Hellwig suggested that we transition to a kernel style API, and hide zstd's upstream API behind that. This is because zstd's upstream API is supports many other use cases, and does not follow the kernel style guide, while the kernel API is focused on the kernel's use cases, and follows the kernel style guide. Where is the previous discussion? --------------------------------- Links for the discussions of the previous versions of the patch set below. The largest changes in the design of the patchset are driven by the discussions in v11, v5, and v1. Sorry for the mix of links, I couldn't find most of the the threads on lkml.org" Link: https://lkml.org/lkml/2020/9/29/27 [1] Link: https://www.spinics.net/lists/linux-crypto/msg58189.html [v12] Link: https://lore.kernel.org/linux-btrfs/20210430013157.747152-1-nickrterrell@gmail.com/ [v11] Link: https://lore.kernel.org/lkml/20210426234621.870684-2-nickrterrell@gmail.com/ [v10] Link: https://lore.kernel.org/linux-btrfs/20210330225112.496213-1-nickrterrell@gmail.com/ [v9] Link: https://lore.kernel.org/linux-f2fs-devel/20210326191859.1542272-1-nickrterrell@gmail.com/ [v8] Link: https://lkml.org/lkml/2020/12/3/1195 [v7] Link: https://lkml.org/lkml/2020/12/2/1245 [v6] Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/ [v5] Link: https://www.spinics.net/lists/linux-btrfs/msg105783.html [v4] Link: https://lkml.org/lkml/2020/9/23/1074 [v3] Link: https://www.spinics.net/lists/linux-btrfs/msg105505.html [v2] Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/ [v1] Signed-off-by: Nick Terrell <terrelln@fb.com> Tested By: Paul Jones <paul@pauljones.id.au> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64 Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf> * tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linux: lib: zstd: Add cast to silence clang's -Wbitwise-instead-of-logical MAINTAINERS: Add maintainer entry for zstd lib: zstd: Upgrade to latest upstream zstd version 1.4.10 lib: zstd: Add decompress_sources.h for decompress_unzstd lib: zstd: Add kernel-specific API
2021-11-13Merge tag 'virtio-mem-for-5.16' of git://github.com/davidhildenbrand/linuxLinus Torvalds2-3/+7
Pull virtio-mem update from David Hildenbrand: "Support the VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE feature in virtio-mem, now that "accidential" access to logically unplugged memory inside added Linux memory blocks is no longer possible, because we: - Removed /dev/kmem in commit bbcd53c96071 ("drivers/char: remove /dev/kmem for good") - Disallowed access to virtio-mem device memory via /dev/mem in commit 2128f4e21aa ("virtio-mem: disallow mapping virtio-mem memory via /dev/mem") - Sanitized access to virtio-mem device memory via /proc/kcore in commit 0daa322b8ff9 ("fs/proc/kcore: don't read offline sections, logically offline pages and hwpoisoned pages") - Sanitized access to virtio-mem device memory via /proc/vmcore in commit ce2814622e84 ("virtio-mem: kdump mode to sanitize /proc/vmcore access") The new VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE feature that will be required by some hypervisors implementing virtio-mem in the near future, so let's support it now that we safely can" * tag 'virtio-mem-for-5.16' of git://github.com/davidhildenbrand/linux: virtio-mem: support VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE
2021-11-13perf tests: Remove bash constructs from stat_all_pmu.shJames Clark1-2/+2
The tests were passing but without testing and were printing the following: $ ./perf test -v 90 90: perf all PMU test : --- start --- test child forked, pid 51650 Testing cpu/branch-instructions/ ./tests/shell/stat_all_pmu.sh: 10: [: Performance counter stats for 'true': 137,307 cpu/branch-instructions/ 0.001686672 seconds time elapsed 0.001376000 seconds user 0.000000000 seconds sys: unexpected operator Changing the regexes to a grep works in sh and prints this: $ ./perf test -v 90 90: perf all PMU test : --- start --- test child forked, pid 60186 [...] Testing tlb_flush.stlb_any test child finished with 0 ---- end ---- perf all PMU test: Ok Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20211028134828.65774-4-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-13perf tests: Remove bash construct from record+zstd_comp_decomp.shJames Clark1-1/+1
Commit 463538a383a2 ("perf tests: Fix test 68 zstd compression for s390") inadvertently removed the -g flag from all platforms rather than just s390, because the [[ ]] construct fails in sh. Changing to single brackets restores testing of call graphs and removes the following error from the output: $ ./perf test -v 85 85: Zstd perf.data compression/decompression : --- start --- test child forked, pid 50643 Collecting compressed record file: ./tests/shell/record+zstd_comp_decomp.sh: 15: [[: not found Fixes: 463538a383a2 ("perf tests: Fix test 68 zstd compression for s390") Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20211028134828.65774-3-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-13perf test: Remove bash construct from stat_bpf_counters.sh testJames Clark1-1/+1
Currently the test skips with an error because == only works in bash: $ ./perf test 91 -v Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc 91: perf stat --bpf-counters test : --- start --- test child forked, pid 44586 ./tests/shell/stat_bpf_counters.sh: 26: [: -v: unexpected operator test child finished with -2 ---- end ---- perf stat --bpf-counters test: Skip Changing == to = does the same thing, but doesn't result in an error: ./perf test 91 -v Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc 91: perf stat --bpf-counters test : --- start --- test child forked, pid 45833 Skipping: --bpf-counters not supported Error: unknown option `bpf-counters' [...] test child finished with -2 ---- end ---- perf stat --bpf-counters test: Skip Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20211028134828.65774-2-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-13perf bench futex: Fix memory leak of perf_cpu_map__new()Sohaib Mohamed4-0/+4
ASan reports memory leaks while running: $ sudo ./perf bench futex all The leaks are caused by perf_cpu_map__new not being freed. This patch adds the missing perf_cpu_map__put since it calls cpu_map_delete implicitly. Fixes: 9c3516d1b850ea93 ("libperf: Add perf_cpu_map__new()/perf_cpu_map__read() functions") Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: André Almeida <andrealmeid@collabora.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sohaib Mohamed <sohaib.amhmd@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lore.kernel.org/lkml/20211112201134.77892-1-sohaib.amhmd@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-13tools arch x86: Sync the msr-index.h copy with the kernel sourcesArnaldo Carvalho de Melo1-0/+2
To pick up the changes in: dae1bd58389615d4 ("x86/msr-index: Add MSRs for XFD") Addressing these tools/perf build warnings: diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' That makes the beautification scripts to pick some new entries: $ diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h --- tools/arch/x86/include/asm/msr-index.h 2021-07-15 16:17:01.819817827 -0300 +++ arch/x86/include/asm/msr-index.h 2021-11-06 15:49:33.738517311 -0300 @@ -625,6 +625,8 @@ #define MSR_IA32_BNDCFGS_RSVD 0x00000ffc +#define MSR_IA32_XFD 0x000001c4 +#define MSR_IA32_XFD_ERR 0x000001c5 #define MSR_IA32_XSS 0x00000da0 #define MSR_IA32_APICBASE 0x0000001b $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > /tmp/before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > /tmp/after $ diff -u /tmp/before /tmp/after --- /tmp/before 2021-11-13 11:10:39.964201505 -0300 +++ /tmp/after 2021-11-13 11:10:47.902410873 -0300 @@ -93,6 +93,8 @@ [0x000001b0] = "IA32_ENERGY_PERF_BIAS", [0x000001b1] = "IA32_PACKAGE_THERM_STATUS", [0x000001b2] = "IA32_PACKAGE_THERM_INTERRUPT", + [0x000001c4] = "IA32_XFD", + [0x000001c5] = "IA32_XFD_ERR", [0x000001c8] = "LBR_SELECT", [0x000001c9] = "LBR_TOS", [0x000001d9] = "IA32_DEBUGCTLMSR", $ And this gets rebuilt: CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Now one can trace systemwide asking to see backtraces to where those MSRs are being read/written with: # perf trace -e msr:*_msr/max-stack=32/ --filter="msr==IA32_XFD || msr==IA32_XFD_ERR" ^C# # If we use -v (verbose mode) we can see what it does behind the scenes: # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_XFD || msr==IA32_XFD_ERR" <SNIP> New filter for msr:read_msr: (msr==0x1c4 || msr==0x1c5) && (common_pid != 4448951 && common_pid != 8781) New filter for msr:write_msr: (msr==0x1c4 || msr==0x1c5) && (common_pid != 4448951 && common_pid != 8781) <SNIP> ^C# Example with a frequent msr: # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2 Using CPUID AuthenticAMD-25-21-0 0x48 New filter for msr:read_msr: (msr==0x48) && (common_pid != 3738351 && common_pid != 3564) 0x48 New filter for msr:write_msr: (msr==0x48) && (common_pid != 3738351 && common_pid != 3564) mmap size 528384B Looking at the vmlinux_path (8 entries long) symsrc__init: build id mismatch for vmlinux. Using /proc/kcore for kernel data Using /proc/kallsyms for symbols 0.000 pipewire/2479 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) __switch_to_xtra ([kernel.kallsyms]) __switch_to ([kernel.kallsyms]) __schedule ([kernel.kallsyms]) schedule ([kernel.kallsyms]) schedule_hrtimeout_range_clock ([kernel.kallsyms]) do_epoll_wait ([kernel.kallsyms]) __x64_sys_epoll_wait ([kernel.kallsyms]) do_syscall_64 ([kernel.kallsyms]) entry_SYSCALL_64_after_hwframe ([kernel.kallsyms]) epoll_wait (/usr/lib64/libc-2.33.so) [0x76c4] (/usr/lib64/spa-0.2/support/libspa-support.so) [0x4cf0] (/usr/lib64/spa-0.2/support/libspa-support.so) 0.027 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) __switch_to_xtra ([kernel.kallsyms]) __switch_to ([kernel.kallsyms]) __schedule ([kernel.kallsyms]) schedule_idle ([kernel.kallsyms]) do_idle ([kernel.kallsyms]) cpu_startup_entry ([kernel.kallsyms]) start_kernel ([kernel.kallsyms]) secondary_startup_64_no_verify ([kernel.kallsyms]) # Cc: Borislav Petkov <bp@suse.de> Cc: Chang S. Bae <chang.seok.bae@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/YY%2FJdb6on7swsn+C@kernel.org/ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-13tools headers UAPI: Sync drm/i915_drm.h with the kernel sourcesArnaldo Carvalho de Melo1-1/+241
To pick up the changes in: e5e32171a2cf1e43 ("drm/i915/guc: Connect UAPI to GuC multi-lrc interface") 9409eb35942713d0 ("drm/i915: Expose logical engine instance to user") ea673f17ab763879 ("drm/i915/uapi: Add comment clarifying purpose of I915_TILING_* values") d3ac8d42168a9be7 ("drm/i915/pxp: interfaces for using protected objects") cbbd3764b2399ad8 ("drm/i915/pxp: Create the arbitrary session after boot") That don't add any new ioctl, so no changes in tooling. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h' diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Huang, Sean Z <sean.z.huang@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-13tools headers UAPI: Sync sound/asound.h with the kernel sourcesArnaldo Carvalho de Melo1-1/+1
To pick up the changes in: 5aec579e08e4f2be ("ALSA: uapi: Fix a C++ style comment in asound.h") That is just changing a // style comment to /* */. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h' diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-13tools headers UAPI: Sync linux/prctl.h with the kernel sourcesArnaldo Carvalho de Melo1-0/+3
To pick the changes in: 61bc346ce64a3864 ("uapi/linux/prctl: provide macro definitions for the PR_SCHED_CORE type argument") That don't result in any changes in tooling: $ tools/perf/trace/beauty/prctl_option.sh > before $ cp include/uapi/linux/prctl.h tools/include/uapi/linux/prctl.h $ tools/perf/trace/beauty/prctl_option.sh > after $ diff -u before after $ Just silences this perf tools build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/prctl.h' differs from latest version at 'include/uapi/linux/prctl.h' diff -u tools/include/uapi/linux/prctl.h include/uapi/linux/prctl.h Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Eugene Syromiatnikov <esyr@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-13tools headers UAPI: Sync arch prctl headers with the kernel sourcesArnaldo Carvalho de Melo1-0/+4
To pick the changes in this cset: db8268df0983adc2 ("x86/arch_prctl: Add controls for dynamic XSTATE components") This picks these new prctls: $ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/before $ cp arch/x86/include/uapi/asm/prctl.h tools/arch/x86/include/uapi/asm/prctl.h $ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/after $ diff -u /tmp/before /tmp/after --- /tmp/before 2021-11-13 10:42:52.787308809 -0300 +++ /tmp/after 2021-11-13 10:43:02.295558837 -0300 @@ -6,6 +6,9 @@ [0x1004 - 0x1001]= "GET_GS", [0x1011 - 0x1001]= "GET_CPUID", [0x1012 - 0x1001]= "SET_CPUID", + [0x1021 - 0x1001]= "GET_XCOMP_SUPP", + [0x1022 - 0x1001]= "GET_XCOMP_PERM", + [0x1023 - 0x1001]= "REQ_XCOMP_PERM", }; #define x86_arch_prctl_codes_2_offset 0x2001 $ With this 'perf trace' can translate those numbers into strings and use the strings in filter expressions: # perf trace -e prctl 0.000 ( 0.011 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9c014b7df5) = 0 0.032 ( 0.002 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9bb6b51580) = 0 5.452 ( 0.003 ms): StreamT~ns #30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfeb70) = 0 5.468 ( 0.002 ms): StreamT~ns #30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfea70) = 0 24.494 ( 0.009 ms): IndexedDB #556/3722624 prctl(option: SET_NAME, arg2: 0x7f562a32ae28) = 0 24.540 ( 0.002 ms): IndexedDB #556/3722624 prctl(option: SET_NAME, arg2: 0x7f563c6d4b30) = 0 670.281 ( 0.008 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30805c8) = 0 670.293 ( 0.002 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30800f0) = 0 ^C# This addresses these perf build warnings: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/prctl.h' differs from latest version at 'arch/x86/include/uapi/asm/prctl.h' diff -u tools/arch/x86/include/uapi/asm/prctl.h arch/x86/include/uapi/asm/prctl.h Cc: Borislav Petkov <bp@suse.de> Cc: Chang S. Bae <chang.seok.bae@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/YY%2FER104k852WOTK@kernel.org/T/#u Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-16 04:40:04 +0000