summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2012-01-09mtd: introduce mtd_block_isbad interfaceArtem Bityutskiy21-30/+34
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_resume interfaceArtem Bityutskiy10-12/+15
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_suspend interfaceArtem Bityutskiy10-10/+15
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_is_locked interfaceArtem Bityutskiy3-4/+8
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_unlock interfaceArtem Bityutskiy5-5/+10
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_lock interfaceArtem Bityutskiy5-6/+11
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_sync interfaceArtem Bityutskiy11-14/+17
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_writev interfaceArtem Bityutskiy4-11/+18
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_lock_user_prot_reg interfaceArtem Bityutskiy3-4/+10
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_write_user_prot_reg interfaceArtem Bityutskiy3-4/+12
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_read_user_prot_reg interfaceArtem Bityutskiy3-4/+12
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_get_user_prot_info interfaceArtem Bityutskiy3-3/+11
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_read_fact_prot_reg interfaceArtem Bityutskiy3-4/+12
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_get_fact_prot_info interfaceArtem Bityutskiy3-8/+15
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_write_oob interfaceArtem Bityutskiy13-27/+31
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_read_oob interfaceArtem Bityutskiy14-31/+37
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_panic_write interfaceArtem Bityutskiy3-14/+19
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_write interfaceArtem Bityutskiy22-73/+84
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_read interfaceArtem Bityutskiy35-135/+152
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_get_unmapped_area interfaceArtem Bityutskiy5-11/+18
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_unpoint interfaceArtem Bityutskiy5-10/+14
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_point interfaceArtem Bityutskiy5-12/+18
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_erase interfaceArtem Bityutskiy22-28/+37
This patch is part of a patch-set which changes the MTD interface from 'mtd->func()' form to 'mtd_func()' form. We need this because we want to add common code to to all drivers in the mtd core level, which is impossible with the current interface when MTD clients call driver functions like 'read()' or 'write()' directly. At this point we just introduce a new inline wrapper function, but later some of them are expected to gain more code. E.g., the input parameters check should be moved to the wrappers rather than be duplicated at many drivers. This particular patch introduced the 'mtd_erase()' interface. The following patches add all the other interfaces one by one. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: mtdchar: rename functionsArtem Bityutskiy1-37/+39
We are going to re-work the MTD interface and change 'mtd->write()' to 'mtd_write()', 'mtd->read()' to 'mtd_read()' and so forth for all functions in the 'struct mtd_info' structure. However, mtdchar.c has its own 'mtd_read()', 'mtd_write()', etc functions which collide with our changes. This patch renames these functions to 'mtdchar_read()', 'mtdchar_write()', etc. Additionally, to make the 'mtdchar.c' file look consistent, rename similarly all the other functions starting with 'mtd_'. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09logfs: rename functions starting with mtd_Artem Bityutskiy1-29/+32
We are going to re-work the MTD interface and change 'mtd->write()' to 'mtd_write()', 'mtd->read()' to 'mtd_read()' and so forth for all functions in the 'struct mtd_info' structure. However, logfs has its own 'mtd_read()', 'mtd_write()', etc functions which collide with our changes. This patch renames these logfs functions to 'logfs_mtd_read()', 'logfs_mtd_write()', etc. Additionally, to make the 'fs/logfs/dev_mtd.c' file look consistent, rename similarly all the other functions starting with 'mtd_'. Cc: Jörn Engel <joern@logfs.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: lpddr: drop unnecessary zeroingArtem Bityutskiy1-7/+0
We allocate the "mtd" structure using kzalloc which means we do not have to initialize unused MTD function pointers to NULL, since it is safe to assume in Linux that NULL contains all zeroes. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: map.h: fix arm cross-build failureArtem Bityutskiy1-1/+1
This patch fixes the following build failure: In file included from include/linux/mtd/qinfo.h:4:0, from include/linux/mtd/pfow.h:7, from drivers/mtd/lpddr/lpddr_cmds.c:27: include/linux/mtd/map.h: In function 'inline_map_read': include/linux/mtd/map.h:409:3: error: implicit declaration of function 'BUILD_BUG_ON' [-Werror=implicit-function-declaration] Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: txx9ndfmc: use devm_request_and_ioremapJulia Lawall1-5/+1
Reimplement a call to devm_request_mem_region followed by a call to ioremap or ioremap_nocache by a call to devm_request_and_ioremap. The semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // <smpl> @nm@ expression myname; identifier i; @@ struct platform_driver i = { .driver = { .name = myname } }; @@ expression dev,res,size; expression nm.myname; @@ -if (!devm_request_mem_region(dev, res->start, size, - \(res->name\|dev_name(dev)\|myname\))) { - ... - return ...; -} ... when != res->start ( -devm_ioremap(dev,res->start,size) +devm_request_and_ioremap(dev,res) | -devm_ioremap_nocache(dev,res->start,size) +devm_request_and_ioremap(dev,res) ) ... when any when != res->start // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: lantiq-flash: drop iounmap for devm_ allocated dataJulia Lawall1-5/+1
Data allocated with devm_ioremap or devm_ioremap_nocache should not be freed using iounmap, because doing so causes a dangling pointer, and a subsequent double free. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ expression x; @@ ( x = devm_ioremap(...) | x = devm_ioremap_nocache(...) ) @@ expression r.x; @@ * iounmap(x) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: gpio-nand: add device tree bindingsJamie Iles2-7/+152
Add device tree bindings so that the gpio-nand driver may be instantiated from the device tree. This also allows the partitions to be specified in the device tree. v7: - restore runtime device tree/non device tree detection v6: - convert to mtd_device_parse_register() v5: - fold dt config helpers into a single gpio_nand_of_get_config() v4: - get io sync address from gpio-control-nand,io-sync-reg property rather than a resource - clarified a few details in the binding v3: - remove redundant cast and a couple of whitespace/naming changes v2: - add CONFIG_OF guards for non-dt platforms - compatible becomes gpio-control-nand - clarify some binding details Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: bcm63xxpart: check the image tag's crc32Jonas Gorski1-16/+29
Only use the values from the image tag if it is valid. Always create the CFE, NVRAM and linux partitions, to allow flashing a new image even if the old is invalid without overwriting CFE or NVRAM. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09MIPS: BCM63XX: bcm963xx_tag.h: make crc fields integersJonas Gorski1-6/+5
All CRC32 fields are 32 bit integers, so define them as such to prevent unnecessary casts if we want to use them. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: bcm63xxpart: don't assume NVRAM is always the fourth partitionJonas Gorski1-2/+2
Instead of referencing the sizes of fixed partitions, use the precomputed CFE/NVRAM lengths. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: bcm63xxpart: make sure CFE and NVRAM partitions are at least 64KiBJonas Gorski1-7/+15
The CFE boot loader on BCM63XX platforms assumes itself and the NVRAM partition to be 64 KiB (or erase block sized, if larger). Ensure this assumption is also met when creating the partitions to prevent accidential erasure of CFE or NVRAM. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: bcm63xxpart: check version marker string for newer CFEsJonas Gorski1-5/+17
Recent CFEs do not contain the CFE1CFE1 magic anymore, so check for the "cfe-v" version marker string instead. As very old CFEs do not have this string, leave the CFE1CFE1 magic as a fallback for detection. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: sm_ftl: fix module parameterRusty Russell1-1/+1
You didn't mean this to be a bool. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: docg3: remove unused functionRobert Jarzmik1-0/+2
As the MTD api has no use for the number of erase cycles each block has endured, remove the function which calculated that value. If one day MTD api finds it usefull for wear levelling algorithms to have this information, the function should be put back in place. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: nand: Add ONFI support for FSL NAND controllerShengzhou Liu1-8/+10
- fix NAND_CMD_READID command for ONFI detect. - add NAND_CMD_PARAM command to read the ONFI parameter page. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: nand: fixup for fmr initialization of Freescale NAND controllerShengzhou Liu1-5/+5
There was a bug for fmr initialization, which lead to fmr was always 0x100 in fsl_elbc_chip_init() and caused FCM command timeout before calling fsl_elbc_chip_init_tail(), now we initialize CWTO to maximum timeout value and not relying on the setting of bootloader. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: document that MEMWRITE ioctl is NAND-specificArtem Bityutskiy1-1/+2
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: fsl_elbc_nand: set Nand flash page address to FBAR and FPAR correctlyLiu Shuo1-3/+10
If we use the Nand flash chip whose number of pages in a block is greater than 64(for large page), we must treat the low bit of FBAR as being the high bit of the page address due to the limitation of FCM, it simply uses the low 6-bits (for large page) of the combined block/page address as the FPAR component, rather than considering the actual block size. Signed-off-by: Liu Shuo <b35362@freescale.com> Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Tang Yuantian <b29983@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtdoops: fix the oops_page_used array sizeRoman Tereshonkov1-1/+1
The array of unsigned long pointed by oops_page_used is allocated by vmalloc which requires the size to be in bytes. BITS_PER_LONG is equal to 32. If we want to allocate memory for 32 pages with one bit per page then 32 / BITS_PER_LONG is equal to 1 byte that is 8 bits. To fix it we need to multiply the result by sizeof(unsigned long) equal to 4. Cc: stable@kernel.org Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09jffs2: fix up error handling for insert_inode_lockedEric Sandeen1-1/+0
after 250df6ed274d767da844a5d9f05720b804240197 (fs: protect inode->i_state with inode->i_lock), insert_inode_locked() no longer returns the inode with I_NEW set on failure. However, the error handler still calls unlock_new_inode() on failure, which does a WARN_ON if I_NEW is not set, so any failure spews a lot of warnings. We can just drop the unlock_new_inode() if insert_inode_locked() fails here. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: maps: remove the now unused bcm963xx-flashJonas Gorski3-130/+0
bcm963xx-flash does nothing meaningful anymore. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09MIPS: BCM63XX: use the new bcm63xxpart parserJonas Gorski1-0/+3
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: maps: physmap: allow partition parsers for physmap_flash_dataJonas Gorski2-1/+5
Arch setup code might want to use their own partition parsers, but still use the generic physmap flash driver. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: maps: bcm963xx-flash: make CFE partition parsing an mtd parserJonas Gorski5-150/+202
Recent BCM63XX devices support a variety of flash types (parallel, SPI, NAND) and share the partition layout. To prevent code duplication make the CFE partition parsing code a stand alone mtd parser to allow SPI or NAND flash drivers to use it. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: maps: bcm963xx-flash: clean up printk usageJonas Gorski1-10/+10
Replace raw printk's with their pr_XXX equivalent and unify broken up strings so they become grepable. Also replace the PFX definition with a pr_fmt(). Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: maps: bcm963xx-flash: remove superfluous semicolonsJonas Gorski1-5/+5
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: maps: bcm963xx-flash: fix word order for spare partitionJonas Gorski1-1/+1
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 10:38:31 +0000