| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The SH7786 has different physical memory layout configurations,
configurable through the MMSELR register. The configuration is
typically defined by the bootloader, so Linux generally doesn't care.
Except that depending on the configuration, some PCI MEM areas may or
may not be available. This commit adds a helper function that allows
to retrieve the current physical memory layout configuration. It will
be used in a following patch to exclude unusable PCI MEM areas during
the PCI initialization.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rich Felker <dalias@libc.org>
|
|
When responding to a debug trap (breakpoint) in userspace, the
kernel's trap handler raised SIGTRAP but returned from the trap via a
code path that ignored pending signals, resulting in an infinite loop
re-executing the trapping instruction.
Signed-off-by: Rich Felker <dalias@libc.org>
|
|
unflatten_device_tree() makes use of memblock allocation, and
therefore must be called before paging_init() migrates the memblock
allocation data to the bootmem framework. Otherwise the record of the
allocation for the expanded device tree will be lost, and will
eventually be clobbered when allocated for another use.
Signed-off-by: Rich Felker <dalias@libc.org>
|
|
Commit 00b73d8d1b71 ("sh: add working futex atomic ops on userspace
addresses for smp") changed the futex_atomic_op_inuser function to
use a loop. In case of the FUTEX_OP_SET op with a userspace address
containing a value different of 0, this loop is an endless loop.
Fix that by loading the value of oldval from the userspace before doing
the cmpxchg op, also for the FUTEX_OP_SET case.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Rich Felker <dalias@libc.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Two fixlets"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/hwbp: Simplify the perf-hwbp code, fix documentation
perf/x86/intel: Fix linear IP of PEBS real_ip on Haswell and later CPUs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Two UV platform fixes, and a kbuild fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/UV: Fix critical UV MMR address error
x86/platform/uv/BAU: Add APIC idt entry
x86/purgatory: Avoid creating stray .<pid>.d files, remove -MD from KBUILD_CFLAGS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 PTI fixes from Ingo Molnar:
"Two fixes: a relatively simple objtool fix that makes Clang built
kernels work with ORC debug info, plus an alternatives macro fix"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Fixup alternative_call_2
objtool: Add Clang support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- fix missed rebuild of TRIM_UNUSED_KSYMS
- fix rpm-pkg for GNU tar >= 1.29
- include scripts/dtc/include-prefixes/* to kernel header deb-pkg
- add -no-integrated-as option ealier to fix building with Clang
- fix netfilter Makefile for parallel building
* tag 'kbuild-fixes-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
netfilter: nf_nat_snmp_basic: add correct dependency to Makefile
kbuild: rpm-pkg: Support GNU tar >= 1.29
builddeb: Fix header package regarding dtc source links
kbuild: set no-integrated-as before incl. arch Makefile
kbuild: make scripts/adjust_autoksyms.sh robust against timestamp races
|
|
Pull networking fixes from David Miller:
1) Fix RCU locking in xfrm_local_error(), from Taehee Yoo.
2) Fix return value assignments and thus error checking in
iwl_mvm_start_ap_ibss(), from Johannes Berg.
3) Don't count header length twice in vti4, from Stefano Brivio.
4) Fix deadlock in rt6_age_examine_exception, from Eric Dumazet.
5) Fix out-of-bounds access in nf_sk_lookup_slow{v4,v6}() from Subash
Abhinov.
6) Check nladdr size in netlink_connect(), from Alexander Potapenko.
7) VF representor SQ numbers are 32 not 16 bits, in mlx5 driver, from
Or Gerlitz.
8) Out of bounds read in skb_network_protocol(), from Eric Dumazet.
9) r8169 driver sets driver data pointer after register_netdev() which
is too late. Fix from Heiner Kallweit.
10) Fix memory leak in mlx4 driver, from Moshe Shemesh.
11) The multi-VLAN decap fix added a regression when dealing with device
that lack a MAC header, such as tun. Fix from Toshiaki Makita.
12) Fix integer overflow in dynamic interrupt coalescing code. From Tal
Gilboa.
13) Use after free in vrf code, from David Ahern.
14) IPV6 route leak between VRFs fix, also from David Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits)
net: mvneta: fix enable of all initialized RXQs
net/ipv6: Fix route leaking between VRFs
vrf: Fix use after free and double free in vrf_finish_output
ipv6: sr: fix seg6 encap performances with TSO enabled
net/dim: Fix int overflow
vlan: Fix vlan insertion for packets without ethernet header
net: Fix untag for vlan packets without ethernet header
atm: iphase: fix spelling mistake: "Receiverd" -> "Received"
vhost: validate log when IOTLB is enabled
qede: Do not drop rx-checksum invalidated packets.
hv_netvsc: enable multicast if necessary
ip_tunnel: Resolve ipsec merge conflict properly.
lan78xx: Crash in lan78xx_writ_reg (Workqueue: events lan78xx_deferred_multicast_write)
qede: Fix barrier usage after tx doorbell write.
vhost: correctly remove wait queue during poll failure
net/mlx4_core: Fix memory leak while delete slave's resources
net/mlx4_en: Fix mixed PFC and Global pause user control requests
net/smc: use announced length in sock_recvmsg()
llc: properly handle dev_queue_xmit() return value
strparser: Fix sign of err codes
...
|
|
In mvneta_port_up() we enable relevant RX and TX port queues by write
queues bit map to an appropriate register.
q_map must be ZERO in the beginning of this process.
Signed-off-by: Yelena Krivosheev <yelena@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Donald reported that IPv6 route leaking between VRFs is not working.
The root cause is the strict argument in the call to rt6_lookup when
validating the nexthop spec.
ip6_route_check_nh validates the gateway and device (if given) of a
route spec. It in turn could call rt6_lookup (e.g., lookup in a given
table did not succeed so it falls back to a full lookup) and if so
sets the strict argument to 1. That means if the egress device is given,
the route lookup needs to return a result with the same device. This
strict requirement does not work with VRFs (IPv4 or IPv6) because the
oif in the flow struct is overridden with the index of the VRF device
to trigger a match on the l3mdev rule and force the lookup to its table.
The right long term solution is to add an l3mdev index to the flow
struct such that the oif is not overridden. That solution will not
backport well, so this patch aims for a simpler solution to relax the
strict argument if the route spec device is an l3mdev slave. As done
in other places, use the FLOWI_FLAG_SKIP_NH_OIF to know that the
RT6_LOOKUP_F_IFACE flag needs to be removed.
Fixes: ca254490c8df ("net: Add VRF support to IPv6 stack")
Reported-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Miguel reported an skb use after free / double free in vrf_finish_output
when neigh_output returns an error. The vrf driver should return after
the call to neigh_output as it takes over the skb on error path as well.
Patch is a simplified version of Miguel's patch which was written for 4.9,
and updated to top of tree.
Fixes: 8f58336d3f78a ("net: Add ethernet header for pass through VRF device")
Signed-off-by: Miguel Fadon Perlines <mfadon@teldat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enabling TSO can lead to abysmal performances when using seg6 in
encap mode, such as with the ixgbe driver. This patch adds a call to
iptunnel_handle_offloads() to remove the encapsulation bit if needed.
Before:
root@comp4-seg6bpf:~# iperf3 -c fc00::55
Connecting to host fc00::55, port 5201
[ 4] local fc45::4 port 36592 connected to fc00::55 port 5201
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 4] 0.00-1.00 sec 196 KBytes 1.60 Mbits/sec 47 6.66 KBytes
[ 4] 1.00-2.00 sec 304 KBytes 2.49 Mbits/sec 100 5.33 KBytes
[ 4] 2.00-3.00 sec 284 KBytes 2.32 Mbits/sec 92 5.33 KBytes
After:
root@comp4-seg6bpf:~# iperf3 -c fc00::55
Connecting to host fc00::55, port 5201
[ 4] local fc45::4 port 43062 connected to fc00::55 port 5201
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 4] 0.00-1.00 sec 1.03 GBytes 8.89 Gbits/sec 0 743 KBytes
[ 4] 1.00-2.00 sec 1.03 GBytes 8.87 Gbits/sec 0 743 KBytes
[ 4] 2.00-3.00 sec 1.03 GBytes 8.87 Gbits/sec 0 743 KBytes
Reported-by: Tom Herbert <tom@quantonium.net>
Fixes: 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Signed-off-by: David Lebrun <dlebrun@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull ceph fix from Ilya Dryomov:
"A fix for a dio-enabled loop on ceph deadlock from Zheng, marked for
stable"
* tag 'ceph-for-4.16-rc8' of git://github.com/ceph/ceph-client:
ceph: only dirty ITER_IOVEC pages for direct read
|
|
Pull KVM fixes from Radim Krčmář:
"PPC:
- Fix a bug causing occasional machine check exceptions on POWER8
hosts (introduced in 4.16-rc1)
x86:
- Fix a guest crashing regression with nested VMX and restricted
guest (introduced in 4.16-rc1)
- Fix dependency check for pv tlb flush (the wrong dependency that
effectively disabled the feature was added in 4.16-rc4, the
original feature in 4.16-rc1, so it got decent testing)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix pv tlb flush dependencies
KVM: nVMX: sync vmcs02 segment regs prior to vmx_set_cr0
KVM: PPC: Book3S HV: Fix duplication of host SLB entries
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"A simple but worthwhile I2C driver fix for 4.16"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: i2c-stm32f7: fix no check on returned setup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Very small fixes (all one-liners) at this time.
One fix is for a PCM core stuff to correct the mmap behavior on
non-x86. It doesn't show on most machines but mostly only for exotic
non-interleaved formats"
* tag 'sound-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: pcm: potential uninitialized return values
ALSA: pcm: Use dma_bytes as size parameter in dma_mmap_coherent()
ALSA: usb-audio: Add native DSD support for TEAC UD-301
|
|
When calculating difference between samples, the values
are multiplied by 100. Large values may cause int overflow
when multiplied (usually on first iteration).
Fixed by forcing 100 to be of type unsigned long.
Fixes: 4c4dbb4a7363 ("net/mlx5e: Move dynamic interrupt coalescing code to include/linux")
Signed-off-by: Tal Gilboa <talgi@mellanox.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Toshiaki Makita says:
====================
Fix vlan tag handling for vlan packets without ethernet headers
Eric Dumazet reported syzbot found a new bug which leads to underflow of
size argument of memmove(), causing crash[1]. This can be triggered by tun
devices.
The underflow happened because skb_vlan_untag() did not expect vlan packets
without ethernet headers, and tun can produce such packets.
I also checked vlan_insert_inner_tag() and found a similar bug.
This series fixes these problems.
[1] https://marc.info/?l=linux-netdev&m=152221753920510&w=2
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In some situation vlan packets do not have ethernet headers. One example
is packets from tun devices. Users can specify vlan protocol in tun_pi
field instead of IP protocol. When we have a vlan device with reorder_hdr
disabled on top of the tun device, such packets from tun devices are
untagged in skb_vlan_untag() and vlan headers will be inserted back in
vlan_insert_inner_tag().
vlan_insert_inner_tag() however did not expect packets without ethernet
headers, so in such a case size argument for memmove() underflowed.
We don't need to copy headers for packets which do not have preceding
headers of vlan headers, so skip memmove() in that case.
Also don't write vlan protocol in skb->data when it does not have enough
room for it.
Fixes: cbe7128c4b92 ("vlan: Fix out of order vlan headers with reorder header off")
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In some situation vlan packets do not have ethernet headers. One example
is packets from tun devices. Users can specify vlan protocol in tun_pi
field instead of IP protocol, and skb_vlan_untag() attempts to untag such
packets.
skb_vlan_untag() (more precisely, skb_reorder_vlan_header() called by it)
however did not expect packets without ethernet headers, so in such a case
size argument for memmove() underflowed and triggered crash.
====
BUG: unable to handle kernel paging request at ffff8801cccb8000
IP: __memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43
PGD 9cee067 P4D 9cee067 PUD 1d9401063 PMD 1cccb7063 PTE 2810100028101
Oops: 000b [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 17663 Comm: syz-executor2 Not tainted 4.16.0-rc7+ #368
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43
RSP: 0018:ffff8801cc046e28 EFLAGS: 00010287
RAX: ffff8801ccc244c4 RBX: fffffffffffffffe RCX: fffffffffff6c4c2
RDX: fffffffffffffffe RSI: ffff8801cccb7ffc RDI: ffff8801cccb8000
RBP: ffff8801cc046e48 R08: ffff8801ccc244be R09: ffffed0039984899
R10: 0000000000000001 R11: ffffed0039984898 R12: ffff8801ccc244c4
R13: ffff8801ccc244c0 R14: ffff8801d96b7c06 R15: ffff8801d96b7b40
FS: 00007febd562d700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff8801cccb8000 CR3: 00000001ccb2f006 CR4: 00000000001606e0
DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
Call Trace:
memmove include/linux/string.h:360 [inline]
skb_reorder_vlan_header net/core/skbuff.c:5031 [inline]
skb_vlan_untag+0x470/0xc40 net/core/skbuff.c:5061
__netif_receive_skb_core+0x119c/0x3460 net/core/dev.c:4460
__netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4627
netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4701
netif_receive_skb+0xae/0x390 net/core/dev.c:4725
tun_rx_batched.isra.50+0x5ee/0x870 drivers/net/tun.c:1555
tun_get_user+0x299e/0x3c20 drivers/net/tun.c:1962
tun_chr_write_iter+0xb9/0x160 drivers/net/tun.c:1990
call_write_iter include/linux/fs.h:1782 [inline]
new_sync_write fs/read_write.c:469 [inline]
__vfs_write+0x684/0x970 fs/read_write.c:482
vfs_write+0x189/0x510 fs/read_write.c:544
SYSC_write fs/read_write.c:589 [inline]
SyS_write+0xef/0x220 fs/read_write.c:581
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x454879
RSP: 002b:00007febd562cc68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007febd562d6d4 RCX: 0000000000454879
RDX: 0000000000000157 RSI: 0000000020000180 RDI: 0000000000000014
RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000006b0 R14: 00000000006fc120 R15: 0000000000000000
Code: 90 90 90 90 90 90 90 48 89 f8 48 83 fa 20 0f 82 03 01 00 00 48 39 fe 7d 0f 49 89 f0 49 01 d0 49 39 f8 0f 8f 9f 00 00 00 48 89 d1 <f3> a4 c3 48 81 fa a8 02 00 00 72 05 40 38 fe 74 3b 48 83 ea 20
RIP: __memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43 RSP: ffff8801cc046e28
CR2: ffff8801cccb8000
====
We don't need to copy headers for packets which do not have preceding
headers of vlan headers, so skip memmove() in that case.
Fixes: 4bbb3e0e8239 ("net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Trivial fix to spelling mistake in message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If a page is already locked, attempting to dirty it leads to a deadlock
in lock_page(). This is what currently happens to ITER_BVEC pages when
a dio-enabled loop device is backed by ceph:
$ losetup --direct-io /dev/loop0 /mnt/cephfs/img
$ xfs_io -c 'pread 0 4k' /dev/loop0
Follow other file systems and only dirty ITER_IOVEC pages.
Cc: stable@kernel.org
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix a DM multipath regression introduced in a v4.16-rc6 commit:
restore support for loading, and attaching, scsi_dh modules during
multipath table load. Otherwise some users may find themselves unable
to boot, as was reported today:
https://marc.info/?l=linux-scsi&m=152231276114962&w=2
- Fix a DM core ioctl permission check regression introduced in a
v4.16-rc5 commit.
* tag 'for-4.16/dm-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: fix dropped return code from dm_get_bdev_for_ioctl
dm mpath: fix support for loading scsi_dh modules during table load
|
|
Pull rdma fixes from Jason Gunthorpe:
"It has been fairly silent lately on our -rc front. Big queue of
patches on the mailing list going to for-next though.
Bug fixes:
- qedr driver bugfixes causing application hangs, wrong uapi errnos,
and a race condition
- three syzkaller found bugfixes in the ucma uapi
Regression fixes for things introduced in 4.16:
- Crash on error introduced in mlx5 UMR flow
- Crash on module unload/etc introduced by bad interaction of
restrack and mlx5 patches this cycle
- Typo in a two line syzkaller bugfix causing a bad regression
- Coverity report of nonsense code in hns driver"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/ucma: Introduce safer rdma_addr_size() variants
RDMA/hns: ensure for-loop actually iterates and free's buffers
RDMA/ucma: Check that device exists prior to accessing it
RDMA/ucma: Check that device is connected prior to access it
RDMA/rdma_cm: Fix use after free race with process_one_req
RDMA/qedr: Fix QP state initialization race
RDMA/qedr: Fix rc initialization on CNQ allocation failure
RDMA/qedr: fix QP's ack timeout configuration
RDMA/ucma: Correct option size check using optlen
RDMA/restrack: Move restrack_clean to be symmetrical to restrack_init
IB/mlx5: Don't clean uninitialized UMR resources
|
|
Pull MTD fixes from Boris Brezillon:
"Two fixes, one in the atmel NAND driver and another one in the
CFI/JEDEC code.
Summary:
- Fix a bug in Atmel ECC engine driver
- Fix a bug in the CFI/JEDEC driver"
* tag 'mtd/fixes-for-4.16' of git://git.infradead.org/linux-mtd:
mtd: jedec_probe: Fix crash in jedec_read_mfr()
mtd: nand: atmel: Fix get_sectorsize() function
|
|
dm_get_bdev_for_ioctl()'s return of 0 or 1 must be the result from
prepare_ioctl (1 means the ioctl was issued to a partition, 0 means it
wasn't). Unfortunately commit 519049afea ("dm: use blkdev_get rather
than bdgrab when issuing pass-through ioctl") reused the variable 'r'
to store the return from blkdev_get() that follows prepare_ioctl()
-- whereby dropping prepare_ioctl()'s result on the floor.
This can lead to an ioctl or persistent reservation being issued to a
partition going unnoticed, which implies the extra permission check for
CAP_SYS_RAWIO is skipped.
Fix this by using a different variable to store blkdev_get()'s return.
Fixes: 519049afea ("dm: use blkdev_get rather than bdgrab when issuing pass-through ioctl")
Reported-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Daniel Borkman says:
====================
pull-request: bpf 2018-03-29
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix nfp to properly check max insn count while emitting
instructions in the JIT which was wrongly comparing bytes
against number of instructions before, from Jakub.
2) Fix for bpftool to avoid usage of hex numbers in JSON
output since JSON doesn't accept hex numbers with 0x
prefix, also from Jakub.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ability to have multipath dynamically attach a scsi_dh, that the user
specified in the multipath table, was broken by commit e8f74a0f00 ("dm
mpath: eliminate need to use scsi_device_from_queue").
Restore the ability to load, and attach, a particular scsi_dh module if
one is specified (as noticed by checking m->hw_handler_name).
Fixes: e8f74a0f00 ("dm mpath: eliminate need to use scsi_device_from_queue")
Reported-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Vq log_base is the userspace address of bitmap which has nothing to do
with IOTLB. So it needs to be validated unconditionally otherwise we
may try use 0 as log_base which may lead to pin pages that will lead
unexpected result (e.g trigger BUG_ON() in set_bit_to_user()).
Fixes: 6b1e6cc7855b0 ("vhost: new device IOTLB API")
Reported-by: syzbot+6304bf97ef436580fede@syzkaller.appspotmail.com
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Today, driver drops received packets which are indicated as
invalid checksum by the device. Instead of dropping such packets,
pass them to the stack with CHECKSUM_NONE indication in skb.
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Manish Chopra <manish.chopra@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It turns out that the loop where we read manufacturer
jedec_read_mfd() can under some circumstances get a
CFI_MFR_CONTINUATION repeatedly, making the loop go
over all banks and eventually hit the end of the
map and crash because of an access violation:
Unable to handle kernel paging request at virtual address c4980000
pgd = (ptrval)
[c4980000] *pgd=03808811, *pte=00000000, *ppte=00000000
Internal error: Oops: 7 [#1] PREEMPT ARM
CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc1+ #150
Hardware name: Gemini (Device Tree)
PC is at jedec_probe_chip+0x6ec/0xcd0
LR is at 0x4
pc : [<c03a2bf4>] lr : [<00000004>] psr: 60000013
sp : c382dd18 ip : 0000ffff fp : 00000000
r10: c0626388 r9 : 00020000 r8 : c0626340
r7 : 00000000 r6 : 00000001 r5 : c3a71afc r4 : c382dd70
r3 : 00000001 r2 : c4900000 r1 : 00000002 r0 : 00080000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 0000397f Table: 00004000 DAC: 00000053
Process swapper (pid: 1, stack limit = 0x(ptrval))
Fix this by breaking the loop with a return 0 if
the offset exceeds the map size.
Fixes: 5c9c11e1c47c ("[MTD] [NOR] Add support for flash chips with ID in bank other than 0")
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
|
|
get_sectorsize() was not using the appropriate macro to extract the
ECC sector size from the config cache, which led to buggy ECC when
using 1024 byte sectors.
Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver")
Cc: <stable@vger.kernel.org>
Reported-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Tested-by: Olivier Schonken <olivier.schonken@gmail.com>
|
|
My recent change to netvsc drive in how receive flags are handled
broke multicast. The Hyper-v/Azure virtual interface there is not a
multicast filter list, filtering is only all or none. The driver must
enable all multicast if any multicast address is present.
Fixes: 009f766ca238 ("hv_netvsc: filter multicast/broadcast")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We want to use dev_set_mtu() regardless of how we calculate
the mtu value.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
lan78xx_deferred_multicast_write)
Description:
Crash was reported with syzkaller pointing to lan78xx_write_reg routine.
Root-cause:
Proper cleanup of workqueues and init/setup routines was not happening
in failure conditions.
Fix:
Handled the error conditions by cleaning up the queues and init/setup
routines.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Raghuram Chary J <raghuramchary.jallipalli@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2018-03-29
1) Fix a rcu_read_lock/rcu_read_unlock imbalance
in the error path of xfrm_local_error().
From Taehee Yoo.
2) Some VTI MTU fixes. From Stefano Brivio.
3) Fix a too early overwritten skb control buffer
on xfrm transport mode.
Please note that this pull request has a merge conflict
in net/ipv4/ip_tunnel.c.
The conflict is between
commit f6cc9c054e77 ("ip_tunnel: Emit events for post-register MTU changes")
from the net tree and
commit 24fc79798b8d ("ip_tunnel: Clamp MTU to bounds on new link")
from the ipsec tree.
It can be solved as it is currently done in linux-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Nothing serious, two amdkfd and two tegra fixes"
* tag 'drm-fixes-for-v4.16-rc8' of git://people.freedesktop.org/~airlied/linux:
drm/tegra: dc: Using NULL instead of plain integer
drm/amdkfd: Deallocate SDMA queues correctly
drm/amdkfd: Fix scratch memory with HWS enabled
drm/tegra: dc: Use correct format array for Tegra124
|
|
nf_nat_snmp_basic_main.c includes a generated header, but the
necessary dependency is missing in Makefile. This could cause
build error in parallel building.
Remove a weird line, and add a correct one.
Fixes: cc2d58634e0f ("netfilter: nf_nat_snmp_basic: use asn1 decoder library")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Merge misc fixes from Andrew Morton:
"8 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
MAINTAINERS: demote ARM port to "odd fixes"
MAINTAINERS: correct rmk's email address
mm/kmemleak.c: wait for scan completion before disabling free
mm/memcontrol.c: fix parameter description mismatch
mm/vmstat.c: fix vmstat_update() preemption BUG
mm/page_owner: fix recursion bug after changing skip entries
ipc/shm.c: add split function to shm_vm_ops
mm, slab: memcg_link the SLAB's kmem_cache
|
|
git://anongit.freedesktop.org/tegra/linux into drm-fixes
drm/tegra: Fixes for v4.16
This contains two small fixes, one which fixes a typo that causes a
crash with the new framebuffer modifier query support and another that
fixes a build warning.
* tag 'drm/tegra/for-4.16-fixes' of git://anongit.freedesktop.org/tegra/linux:
drm/tegra: dc: Using NULL instead of plain integer
drm/tegra: dc: Use correct format array for Tegra124
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 4.16. Apologies if this is a bit big at
rc7, but they're all reasonably important fixes. None are actually for
new code, so they aren't indicative of 4.16 being in bad shape from
our point of view.
- Fix missing AT_BASE_PLATFORM (in auxv) when we're using a new
firmware interface for describing CPU features.
- Fix lost pending interrupts due to a race in our interrupt
soft-masking code.
- A workaround for a nest MMU bug with TLB invalidations on Power9.
- A workaround for broadcast TLB invalidations on Power9.
- Fix a bug in our instruction SLB miss handler, when handling bad
addresses (eg. >= TASK_SIZE), which could corrupt non-volatile user
GPRs.
Thanks to: Aneesh Kumar K.V, Balbir Singh, Benjamin Herrenschmidt,
Nicholas Piggin"
* tag 'powerpc-4.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Fix i-side SLB miss bad address handler saving nonvolatile GPRs
powerpc/mm: Fixup tlbie vs store ordering issue on POWER9
powerpc/mm/radix: Move the functions that does the actual tlbie closer
powerpc/mm/radix: Remove unused code
powerpc/mm: Workaround Nest MMU bug with TLB invalidations
powerpc/mm: Add tracking of the number of coprocessors using a context
powerpc/64s: Fix lost pending interrupt due to race causing lost update to irq_happened
powerpc/64s: Fix NULL AT_BASE_PLATFORM when using DT CPU features
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here are are a couple of last-minute fixes for 4.16, mostly for
regressions. As usual, the majory are device tree changes:
- USB 3 support on rk3399 didn't work and is being reverted for now
- One fix for an old suspend/resume bug on rk3399
- A few regulator related fixes on Banana Pi M2, and on imx7d-sdb
- A boot regression fix for all Aspeed SoCs failing to find their
memory
- One more dtc warning fix
The other changes are:
- A few updates to the MAINTAINERS file
- A revert for an incorrect orion5x cleanup
- Two power management fixes for OMAP"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: OMAP: Fix SRAM W+X mapping
ARM: dts: aspeed: Add default memory node
mailmap: Update email address for Gregory CLEMENT
ARM: davinci: fix the GPIO lookup for omapl138-hawk
MAINTAINERS: Update Tegra IOMMU maintainer
ARM: dts: imx7d-sdb: Fix regulator-usb-otg2-vbus node name
ARM: ux500: Fix PMU IRQ regression
ARM: dts: rockchip: Add missing #sound-dai-cells on rk3288
Revert "arm64: dts: rockchip: add usb3-phy otg-port support for rk3399"
arm64: dts: rockchip: Fix rk3399-gru-* s2r (pinctrl hogs, wifi reset)
ARM: OMAP: Fix dmtimer init for omap1
MAINTAINERS: update email address for Maxime Ripard
ARM: dts: sun6i: a31s: bpi-m2: add missing regulators
ARM: dts: sun6i: a31s: bpi-m2: improve pmic properties
|
|
As of the start of 2018, I am no longer paid to support the core 32-bit
ARM architecture code. This means that this code is no longer
commercially supported, and is now only supported through voluntary
effort.
I will continue to merge patches as and when able, but this will be at a
lower priority than before (which means a longer latency.) I have also
be scaled back the amount of time spent reading email, so email that is
intended for my attention needs to make itself plainly obvious, or I
will miss it.
In an attempt to reduce the amount of email Cc'd to me, exclude
arch/arm/boot/dts from the maintainers patterns, but add entries for the
SolidRun platforms I look after.
Link: http://lkml.kernel.org/r/E1ezkgn-0002fO-52@rmk-PC.armlinux.org.uk
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Correct my email address in the MAINTAINTERS file.
Link: http://lkml.kernel.org/r/E1ezkgi-0002fH-01@rmk-PC.armlinux.org.uk
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A crash is observed when kmemleak_scan accesses the object->pointer,
likely due to the following race.
TASK A TASK B TASK C
kmemleak_write
(with "scan" and
NOT "scan=on")
kmemleak_scan()
create_object
kmem_cache_alloc fails
kmemleak_disable
kmemleak_do_cleanup
kmemleak_free_enabled = 0
kfree
kmemleak_free bails out
(kmemleak_free_enabled is 0)
slub frees object->pointer
update_checksum
crash - object->pointer
freed (DEBUG_PAGEALLOC)
kmemleak_do_cleanup waits for the scan thread to complete, but not for
direct call to kmemleak_scan via kmemleak_write. So add a wait for
kmemleak_scan completion before disabling kmemleak_free, and while at it
fix the comment on stop_scan_thread.
[vinmenon@codeaurora.org: fix stop_scan_thread comment]
Link: http://lkml.kernel.org/r/1522219972-22809-1-git-send-email-vinmenon@codeaurora.org
Link: http://lkml.kernel.org/r/1522063429-18992-1-git-send-email-vinmenon@codeaurora.org
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are a couple of places where parameter description and function
name do not match the actual code. Fix it.
Link: http://lkml.kernel.org/r/1520843448-17347-1-git-send-email-honglei.wang@oracle.com
Signed-off-by: Honglei Wang <honglei.wang@oracle.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Attempting to hotplug CPUs with CONFIG_VM_EVENT_COUNTERS enabled can
cause vmstat_update() to report a BUG due to preemption not being
disabled around smp_processor_id().
Discovered on Ubiquiti EdgeRouter Pro with Cavium Octeon II processor.
BUG: using smp_processor_id() in preemptible [00000000] code:
kworker/1:1/269
caller is vmstat_update+0x50/0xa0
CPU: 0 PID: 269 Comm: kworker/1:1 Not tainted
4.16.0-rc4-Cavium-Octeon-00009-gf83bbd5-dirty #1
Workqueue: mm_percpu_wq vmstat_update
Call Trace:
show_stack+0x94/0x128
dump_stack+0xa4/0xe0
check_preemption_disabled+0x118/0x120
vmstat_update+0x50/0xa0
process_one_work+0x144/0x348
worker_thread+0x150/0x4b8
kthread+0x110/0x140
ret_from_kernel_thread+0x14/0x1c
Link: http://lkml.kernel.org/r/1520881552-25659-1-git-send-email-steven.hill@cavium.com
Signed-off-by: Steven J. Hill <steven.hill@cavium.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch fixes commit 5f48f0bd4e36 ("mm, page_owner: skip unnecessary
stack_trace entries").
Because if we skip first two entries then logic of checking count value
as 2 for recursion is broken and code will go in one depth recursion.
so we need to check only one call of _RET_IP(__set_page_owner) while
checking for recursion.
Current Backtrace while checking for recursion:-
(save_stack) from (__set_page_owner) // (But recursion returns true here)
(__set_page_owner) from (get_page_from_freelist)
(get_page_from_freelist) from (__alloc_pages_nodemask)
(__alloc_pages_nodemask) from (depot_save_stack)
(depot_save_stack) from (save_stack) // recursion should return true here
(save_stack) from (__set_page_owner)
(__set_page_owner) from (get_page_from_freelist)
(get_page_from_freelist) from (__alloc_pages_nodemask+)
(__alloc_pages_nodemask) from (depot_save_stack)
(depot_save_stack) from (save_stack)
(save_stack) from (__set_page_owner)
(__set_page_owner) from (get_page_from_freelist)
Correct Backtrace with fix:
(save_stack) from (__set_page_owner) // recursion returned true here
(__set_page_owner) from (get_page_from_freelist)
(get_page_from_freelist) from (__alloc_pages_nodemask+)
(__alloc_pages_nodemask) from (depot_save_stack)
(depot_save_stack) from (save_stack)
(save_stack) from (__set_page_owner)
(__set_page_owner) from (get_page_from_freelist)
Link: http://lkml.kernel.org/r/1521607043-34670-1-git-send-email-maninder1.s@samsung.com
Fixes: 5f48f0bd4e36 ("mm, page_owner: skip unnecessary stack_trace entries")
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@techadventures.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ayush Mittal <ayush.m@samsung.com>
Cc: Prakash Gupta <guptap@codeaurora.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: Vasyl Gomonovych <gomonovych@gmail.com>
Cc: Amit Sahrawat <a.sahrawat@samsung.com>
Cc: <pankaj.m@samsung.com>
Cc: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
