summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2008-11-21drivers/net/wireless/ath9k/rc.c: use ARRAY_SIZEJulia Lawall1-4/+2
ARRAY_SIZE is more concise to use when the size of an array is divided by the size of its type or the size of its first element. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @i@ @@ #include <linux/kernel.h> @depends on i using "paren.iso"@ type T; T[] E; @@ - (sizeof(E)/sizeof(E[...])) + ARRAY_SIZE(E) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21mac80211_hwsim: Update documentation (AP mode enabled)Jouni Malinen1-4/+5
AP mode is now enabled in mac80211, so there is no need to point users to an additional patch to enable the mode. In addition, add a pointer to more hwsim test cases in hostap.git. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21mac80211: rc80211_pid eliminate sparse warningsTomas Winkler1-3/+3
This patch eliminates sparse warnings in pid rate scale algorithm 'debugfs: allow access to signed values' patch hit the dead end year ago w/o much echo so I guess there is no real need to address this properly. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21rt2x00: Cleanup TX/RX entry handlingIvo van Doorn13-135/+127
Merge the callback functions init_txentry() and init_rxentry(). This makes life in rt2x00lib a lot simpler and we can cleanup several functions. rt2x00pci contained "fake" FIELD definitions for descriptor words. This is not flexible since it assumes the driver will always have the same field to indicate if a driver is available or not. This should be dependent on the driver, and we should add a callback function for this. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21mac80211: remove more excess kernel-docRandy Dunlap2-5/+0
Delete kernel-doc struct descriptions for fields that don't exist: Warning(include/net/mac80211.h:1263): Excess struct/union/enum/typedef member 'conf_ht' description in 'ieee80211_ops' Warning(net/mac80211/sta_info.h:309): Excess struct/union/enum/typedef member 'addr' description in 'sta_info' Warning(net/mac80211/sta_info.h:309): Excess struct/union/enum/typedef member 'aid' description in 'sta_info' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> cc: Johannes Berg <johannes@sipsolutions.net> cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21iwlwifi: use Rx single frame mode (one Rx frame per RB)Zhu, Yi2-2/+4
The RCSR default value for single frame mode is off (a RB contains more than one frames). But the driver assumes single frame mode apparently. This patch enables single frame mode for the hardware. It also adds a BUG_ON to make sure the allocated skb satisfies the hardware alignment requirement and removes a useless check. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21iwlwifi: get some more information about command failureWinkler, Tomas1-1/+6
This patch adds additional info about wrong command queue bug Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21iwl3945 : Simplify iwl3945_send_beacon_cmdKolekar, Abhijeet1-12/+14
Moved rate_msk calculation to iwl3945_rate_get_lowest_plcp. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21iwlwifi: move iwl_print_hex_dump to iwl-debug.hWinkler, Tomas2-17/+10
This patch moves iwl_print_hex_dump to iwl-debug.h where it belongs Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21iwl3945 : Fix Sparse WarningsKolekar, Abhijeet1-1/+1
Patch fixes sparse warnings. No need to convert u8 variable to 32. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21iwlwifi: move spectrum measurement code to iwl-spectrum.c fileTomas Winkler5-228/+209
This patch moves spectrum measurement code into iwl-sepctrum.c file. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21iwlwifi: revamp tx scheduler byte count tables handlingTomas Winkler10-244/+129
This moves byte count tables to tx domain removing completely ambivalent shared data. Changes handling of allocation byte count tables and keep warm consistent memory Moves general tx scheduler definitions from iwl-4956-hw.h to iwl-fh.h Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21iwlwifi: move rx queue read pointer into rxqWinkler, Tomas9-83/+37
This patch moves rx status/read registers into iwl_rx_queue structures. This solution is more memory hungry but is more structured and provides needed RX/TX separation Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21iwlwifi: update iwl-commands.h for 3 stream supportHalperin, Daniel C1-5/+7
This patch updates comments and constants to support 1, 2, or 3 spatial streams in rate_n_flags . Signed-off-by: Daniel Halperin <daniel.c.halperin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21iwlwifi: don't fail power set when calibration is not done yetWinkler, Tomas1-9/+8
This patch doesn't fail power save setting when calibration is not done yet. The new power index is registered and will be evaluated again anyway upon calibration completion. This patch also eliminates WARN_ON in mac80211 hw_config during initialization Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21iwlwifi: trivial fix in includesWinkler, Tomas1-2/+1
This patch removes one FIXME: in rearranging includes Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21iwl3945: fix resume for ADHOC networkMohamed Abbas1-7/+14
ieee80211_notify_mac only reconnect BSS networks. Since IBSS does not need any auth or assoc steps we can just resume to the same condition before suspend. This patch will reestablish the ad-hoc network once it comes back from resume. http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1774 Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21iwlagn: fix resume for ADHOC networkMohamed Abbas1-6/+15
ieee80211_notify_mac only reconnect BSS networks. Since IBSS does not need any auth or assoc steps we can just resume to the same condition before suspend. This patch will reestablish the ad-hoc network once it comes back from resume. http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1774 Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21b43: remove rate index warningJohannes Berg1-2/+2
I frequently run into this warning, and added some debugging to see why, and got this: b43 bad rx: 00000000: 2f d2 e2 63 cf a7 14 04 28 18 c8 5f 88 4a a2 00 bogus junk | plcp | fctl| dur b43 bad rx: 00000010: 00 11 24 91 07 4d 00 06 25 ff 8f 78 00 06 25 ff my MAC address | BSSID | AP MAC b43 bad rx: 00000020: 8f 76 20 74 00 00 42 07 00 20 00 00 00 00 aa aa | seq | QoS | CCMP IV | data ... As you can see, there are 6 bogus bytes (sometimes only five) and then the frame. I don't know why, and I don't see how to recover, so let's just drop these frames. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21b43legacy: implement short slot and basic rate handlingJohannes Berg2-13/+103
This implements proper short slot handling and adds code to program the hardware for the correct response rates derived from the basic rate set for the current BSS. (port from b43) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21ipw2200: make association only if SSID is known.Alexey Fisher1-2/+1
'iwconfig eth1 channel 6' would trigger association to _something_, which is wrong. Changing the channel should (and does) trigger reassociation, but only if there is an SSID to associate with. Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21ath9k: enable RXing of beacons on STA/IBSSLuis R. Rodriguez1-3/+2
This enables beacons to come through on STA/IBSS. It should fix sporadic connection issues. Right now mac80211 expect beacons so give it beacons. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21ath5k: allow APs to receive beaconsLuis R. Rodriguez1-2/+2
Allow APs to receive beacons to detect when it needs to use protection to update the NAV correctly on 11b stations. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21ath5k: Fix IMR initNick Kossifidis1-3/+3
*On a previous patch i splitted AR5K_INT_TX to multiple different TX interrupt flags for better handling but i forgot to unmask the new TXDESC and TXEOL interrupts on ath5k_init and only left TXOK. However for each queue we enable TXDESC and TXEOL interrupts, not TXOK so we don't handle TX interrupts at all (because these interrupts remain masked on PISR) and under load it results packet loss. Fix the problem by unmasking TXDESC and TXEOL on ath5k_init. Signed-Off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21ath9k : Display MAC/BB and RF version at startup (v2)Benoit PAPILLAULT2-6/+71
This patch decodes the MAC/BB version (for instance: AR5416) and the RF part version (for instance: AR5133). It has been tested on AR5416/AR5133 which is a 2.4/5GHz 11n device. It also makes the differences between AR5416 (PCI) and AR5418 (PCI Express). Both are named AR5416 in the register definitions. Signed-off-by: Benoit Papillault <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21mac80211: fix BUILD_BUG_ON() caused by misalignment on armFelix Fietkau1-1/+1
On ARM alignment is done slightly different from other architectures. struct ieee80211_tx_rate is aligned to word size, even though it only has 3 single-byte members, which triggers the BUILD_BUG_ON in ieee80211_tx_info_clear_status This patch marks the struct ieee80211_tx_rate as packed, so that ARM behaves like the other architectures. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21ath5k: ignore the return value of ath5k_hw_noise_floor_calibrationFelix Fietkau2-6/+2
Noise floor calibration occasionally fails on Atheros hardware. This is not fatal and can happen if there's simply too much noise on the air. Ignoring the calibration error is the right thing to do here, because when the error is ignored, the hardware will still work, whereas if the error causes the driver to bail out of a bigger configuration function and does not configure the tx queues or the IMR (as is the case in reset.c), the hw no longer works properly until the next reset. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21rt2x00: Fix BUG_ON() with antenna handlingIvo van Doorn5-24/+51
With the new configuration handling, and more specifically splitting the configuration of the antenna from the normal configuration steps allowed a BUG_ON() to be triggered in the driver because the SW_DIVERSITY was send to the driver. This fixes that by catching the value early in rt2x00config.c and replacing it with a sensible value. This also fixes a problem where the antenna is not being initialized at all when the radio is enabled. Since it no longer is part of the mac80211 configuration the only place where rt2x00 configured it was the SW diversity handler. Obviously this is broken for all non-diversity hardware and breaks SW diversity due to a broken initialization. When the radio is enabled the antenna will be configured once as soon as the config() callback function is called. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21rt2x00: Block set_key() during suspend/shutdownIvo van Doorn1-1/+3
mac80211 will call set_key() when the device is shutting down. When the device is unplugged the keys will be lost automatically due to the power loss. When the device is not plugged but the module is only unloaded the keys can remain in the device hardware, when the module is loaded the keys will be cleaned up during initialization. This should prevent the problem reported by Johannes Berg, where unplugging the device while suspended resulted in a NULL pointer error during set_key() which was caused because of the CSR base address being freed. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21rt2x00: Fix LED state handlingIvo van Doorn1-38/+56
For every global LED state change (register/unregister, suspend/resume) we should force the LEDS to turn off. This makes sure that the LEDS will always be in a sane state after the state switch. Note that when unregister is called but the LED class wasn't resumed yet, we shouldn't change the LED state since we might not have access to the device (device was unplugged while suspended). Also remove the checks in the activity, assoc and radio LEDS which blocked calls to brightness_set() when the state hasn't changed. Some of those LEDS could be enabled by themselves when something happens in the hardware (e.g. firmware is loaded). We already did called rt2x00leds to switch the LED off, but those calls were blocked. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21rt2x00: Remove RATE_BASIC flagIvo van Doorn2-8/+7
mac80211 is in charge of determining the basic rates, so we are not using the RATE_BASIC flag anymore. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21Move all rtl818x files to a common directory.Larry Finger17-6/+9
This change improves the maintainability of these drivers. No functionality is changed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21mac80211_hwsim: enable Mesh Point operationAndrey Yurovsky1-2/+4
Initial mesh support: add Mesh Point to supported interfaces mask and allow hwsim to send beacons in mesh mode. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21mac80211: disable BSSID filtering for mesh interfacesAndrey Yurovsky1-2/+15
Mesh interfaces are currently opened with the FIF_ALLMULTI rx filter flag set, however there is no BSSID in mesh so BSSID filtering should be disabled by setting the FIF_OTHER_BSS flag as well. Also explicitly call ieee80211_configure_filter for mesh. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: Javier Cardona <javier@cozbit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21ssb: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers2-7/+6
This patch is part of a larger patch series which will remove the "char bus_id[20]" name string from struct device. The device name is managed in the kobject anyway, and without any size limitation, and just needlessly copied into "struct device". To set and read the device name dev_name(dev) and dev_set_name(dev) must be used. If your code uses static kobjects, which it shouldn't do, "const char *init_name" can be used to statically provide the name the registered device should have. At registration time, the init_name field is cleared, to enforce the use of dev_name(dev) to access the device name at a later time. We need to get rid of all occurrences of bus_id in the entire tree to be able to enable the new interface. Please apply this patch, and possibly convert any remaining remaining occurrences of bus_id. We want to submit a patch to -next, which will remove bus_id from "struct device", to find the remaining pieces to convert, and finally switch over to the new api, which will remove the 20 bytes array and does no longer have a size limitation. CC: Michael Buesch <mb@bu3sch.de> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21libertas: Fine grained configuration of wake-on-lan.Anna Neal7-7/+65
Based on a patch from Shailendra Govardhan <shailen@marvell.com>. This patch allows implementation of more specific wake-on-lan rules than those of ethtool. Please note that only firmware 5.110.22.p20 and above supports this feature. This patch only implements the driver/firmware interface, not the userspace/driver interface. Signed-off-by: Anna Neal <anna@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21ipw2100, ipw2200: select LIB80211John W. Linville1-0/+2
Otherwise some configs can result in missing print_ssid... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21netdevice zd1201: Convert directly reference of netdev->priv to netdev_priv()John W. Linville1-59/+56
We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. OK, becasue Dave S. Miller said, "every direct netdev->priv usage is a bug", and I want to kill netdev->priv later, I decided to convert all the direct reference of netdev->priv first. (Original patch posted by Wang Chen <wangchen@cn.fujitsu.com> w/ above changelog but using dev->ml_priv. That doesn't seem appropriate to me for this driver, so I've revamped it to use netdev_priv() instead. -- JWL) Reviewed-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21ixgbe: convert directly reference of netdev->privWang Chen1-1/+1
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20ixgbe: add SFP+ driver supportDonald Skidmore6-7/+550
This patch adds support for SFP+ PHY in the following device ID's (10DB, 10F1, 10E1). These SFP+ PHY's are accessed via an I2C interface so the patch also includes functions to support this. Another feature of note is that the PHY is pluggable and some rearchitecting was needed to support this. Signed-off-by: Donald Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20DCB: Add support for DCB BCNAlexander Duyck5-9/+416
Adds an interface to configure the Backward Congestion Notification (BCN) feature. In a BCN capabale network, congestion notifications from congested points out in the network can cause the end station limit the rate of a given traffic flow. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20DCB: Add interface to query the state of PFC feature.Alexander Duyck4-1/+62
Adds a netlink interface for Data Center Bridging (DCB) to get and set the enable state of the Priority Flow Control (PFC) feature. Primarily, this is a way to turn off PFC in the driver while DCB remains enabled. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20DCB: Add interface to query # of TCs supported by deviceAlexander Duyck4-1/+193
Adds interface for Data Center Bridging (DCB) to query (and set if supported) the number of traffic classes currently supported by the device for the two (DCB) features: priority groups (PG) and priority flow control (PFC). Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20DCB: Add interface to query for the DCB capabilities of an device.Alexander Duyck4-1/+161
Adds to the netlink interface for Data Center Bridging (DCB), allowing the DCB capabilities supported by a device to be queried. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20ixgbe: this patch adds support for DCB to the kernel and ixgbe driverAlexander Duyck19-19/+2593
This adds support for Data Center Bridging (DCB) features in the ixgbe driver and adds an rtnetlink interface for configuring DCB to the kernel. The DCB feature support included are Priority Grouping (PG) - which allows bandwidth guarantees to be allocated to groups to traffic based on the 802.1q priority, and Priority Based Flow Control (PFC) - which introduces a new MAC control PAUSE frame which works at granularity of the 802.1p priority instead of the link (IEEE 802.3x). Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20net: convert TCP/DCCP ehash rwlocks to spinlocksEric Dumazet5-43/+41
Now TCP & DCCP use RCU lookups, we can convert ehash rwlocks to spinlocks. /proc/net/tcp and other seq_file 'readers' can safely be converted to 'writers'. This should speedup writers, since spin_lock()/spin_unlock() only use one atomic operation instead of two for write_lock()/write_unlock() Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20ipgre: convert to netdevice_opsStephen Hemminger1-16/+26
Convert ipgre tunnel to netdevice ops. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20ipv6: convert tunnels to net_device_opsStephen Hemminger2-30/+32
Like IPV4, convert the tunnel virtual devices to use net_device_ops. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20ipip: convert to net_device_opsStephen Hemminger1-16/+17
Convert to network device ops. Needed to change to directly call the init routine since two sides share same ops. In the process found by inspection a device ref count leak if register_netdevice failed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20hippi: convert driver to net_device_opsStephen Hemminger3-10/+23
Convert the HIPPI infrastructure for use with net_device_ops. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 13:53:55 +0000