summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2013-08-26[SCSI] ufs: Add runtime PM support for UFS host controller driverSujit Reddy Thumma3-7/+113
Add runtime PM helpers to suspend/resume UFS controller at runtime. Enable runtime PM by default for pci and platform drivers as the initialized hardware can suspend if it is not used after bootup. Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Santosh Y <santoshsy@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-26[SCSI] ufs: Add support for host assisted background operationsSujit Reddy Thumma3-0/+376
Background operations in the UFS device can be disabled by the host to reduce the response latency of transfer requests. Add support for enabling/disabling the background operations during runtime suspend/resume of the device. If the device is in critical need of BKOPS it will raise an URGENT_BKOPS exception which should be handled by the host to make sure the device performs as expected. During bootup, the BKOPS is enabled in the device by default. The disable of BKOPS is supported only when the driver supports runtime suspend/resume operations as the runtime PM framework provides a way to determine the device idleness and hence BKOPS can be managed effectively. During runtime resume the BKOPS is disabled to reduce latency and during runtime suspend the BKOPS is enabled to allow device to carry out idle time BKOPS. In some cases where the BKOPS is disabled during runtime resume and due to continuous data transfers the runtime suspend is not triggered, the BKOPS is enabled when the device raises a level-2 exception (outstanding operations - performance impact). Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Santosh Y <santoshsy@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-26[SCSI] ufs: Set fDeviceInit flag to initiate device initializationDolev Raviv4-11/+345
Allow UFS device to complete its initialization and accept SCSI commands by setting fDeviceInit flag. The device may take time for this operation and hence the host should poll until fDeviceInit flag is toggled to zero. This step is mandated by UFS device specification for device initialization completion. Signed-off-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Santosh Y <santoshsy@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-26[SCSI] ufs: Add support for sending NOP OUT UPIUSujit Reddy Thumma3-115/+539
As part of device initialization sequence, sending NOP OUT UPIU and waiting for NOP IN UPIU response is mandatory. This confirms that the device UFS Transport (UTP) layer is functional and the host can configure the device with further commands. Add support for sending NOP OUT UPIU to check the device connection path and test whether the UTP layer on the device side is functional during initialization. A tag is acquired from the SCSI tag map space in order to send the device management command. When the tag is acquired by internal command the scsi command is rejected with host busy flag in order to requeue the request. To avoid frequent collisions between internal commands and scsi commands the device management command tag is allocated in the opposite direction w.r.t block layer tag allocation. Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Santosh Y <santoshsy@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] libiscsi: Add missing prints for session and connection sysfs attrsAdheer Chandravanshi1-0/+6
Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] libiscsi: Add a missing break statementAdheer Chandravanshi1-0/+1
Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] qla2xxx: Fix sparse warnings in qlafx00_fxdisc_iocb function.Saurav Kashyap1-2/+4
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] qla4xxx: Update driver version to 5.03.00-k11Adheer Chandravanshi1-1/+1
Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] qla4xxx: Export more firmware info in sysfsAdheer Chandravanshi5-29/+105
Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] qla4xxx: Only BIOS boot target entries should be at index 0 and 1.Adheer Chandravanshi1-1/+2
Flash target index 0 and 1 are reserved for boot target entries created with BIOS utility. Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] qla4xxx: discovery_parent_idx can be shown without any check.Adheer Chandravanshi1-5/+2
Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] qla4xxx: Set IPv6 traffic class if device type is IPv6.Adheer Chandravanshi1-1/+5
Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] qla4xxx: Use discovery_parent_idx instead of discovery_parent_typeAdheer Chandravanshi1-3/+3
While setting the values for DDB, discovery_parent_idx needs to be used instead of discovery_parent_type. Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] qla4xxx: Allow removal of failed session using logout.Adheer Chandravanshi2-8/+41
If logout is performed on a failed session entry then that session should be gracefully removed. Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] lpfc 8.3.41: Update lpfc version to driver version 8.3.41James Smart1-1/+1
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] lpfc 8.3.41: Update copyrights for 8.3.41 modificationsJames Smart3-3/+3
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] lpfc 8.3.41: Fixed the format of some log message fieldsJames Smart1-1/+1
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] lpfc 8.3.41: Add first burst support to driverJames Smart6-2/+30
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] lpfc 8.3.41: Fixed not able to perform PCI function reset when board ↵James Smart1-5/+6
was not in online mode Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] lpfc 8.3.41: Fixed failure in setting SLI3 board modeJames Smart1-3/+0
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] lpfc 8.3.41: Fixed SLI3 failing FCP write on check-condition no-sense ↵James Smart1-6/+1
with residual zero Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] lpfc 8.3.41: Fixed support for 128 byte WQEsJames Smart4-3/+65
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] lpfc 8.3.41: Ensure driver properly zeros unused fields in SLI4 ↵James Smart1-3/+4
mailbox commands Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] lpfc 8.3.41: Fixed max value of lpfc_lun_queue_depthJames Smart4-13/+44
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] lpfc 8.3.41: Fixed Receive Queue varied frame size handlingJames Smart1-12/+24
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] lpfc 8.3.41: Fix mailbox byteswap issue on PPCJames Smart1-1/+0
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] lpfc 8.3.41: Fixed freeing of iocb when internal loopback times outJames Smart4-11/+55
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] qla4xxx: Update driver version to 5.03.00-k10Vikas Chaudhary1-1/+1
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] qla4xxx: Exporting new attrs for iscsi session and connection in sysfsAdheer Chandravanshi1-57/+146
Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] libiscsi: Exporting new attrs for iscsi session and connection in sysfsAdheer Chandravanshi2-0/+128
Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] scsi_transport_iscsi: Exporting new attrs for iscsi session and ↵Adheer Chandravanshi2-1/+154
connection in sysfs Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] MAINTAINERS: Add maintainer info for bnx2iEddie Wai1-0/+6
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] bnx2i: Update version and copyright year 2013Eddie Wai7-9/+9
Old version: 2.7.2.2 New version: 2.7.6.2 Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] MAINTAINERS: Update for qla4xxxVikas Chaudhary1-1/+1
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] Return ENODATA on medium errorHannes Reinecke5-2/+25
When a medium error is detected the SCSI stack should return ENODATA to the upper layers. [jejb: fix whitespace error] Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] return ENOSPC on thin provisioning failureHannes Reinecke4-1/+15
When the thin provisioning hard threshold is reached we should return ENOSPC to inform upper layers about this fact. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] Set hostbyte status in scsi_check_sense()Hannes Reinecke2-15/+7
We should be modifying the host_byte status in scsi_check_sense() directly; this saves us to introduce a special return code for each and every condition. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] Document enhanced error codesHannes Reinecke1-0/+12
Document the various error codes returned on I/O failure. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-21[SCSI] st: convert class code to use dev_groupsGreg Kroah-Hartman1-11/+16
The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the scsi tape class code to use the correct field. Cc: Kai Mäkisara <Kai.Makisara@kolumbus.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-21[SCSI] sd: convert class code to use dev_groupsGreg Kroah-Hartman1-74/+75
The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the scsi disk class code to use the correct field. It required some functions to be moved around to place the show and store functions next to each other, the old order seemed to make no sense at all. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-12Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds11-51/+98
Pull CIFS fixes from Steve French: "A set of small cifs fixes, including 3 relating to symlink handling" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cifs: don't instantiate new dentries in readdir for inodes that need to be revalidated immediately cifs: set sb->s_d_op before calling d_make_root() cifs: fix bad error handling in crypto code cifs: file: initialize oparms.reconnect before using it Do not attempt to do cifs operations reading symlinks with SMB2 cifs: extend the buffer length enought for sprintf() using
2013-08-12Merge tag 'ext4_for_linus' of ↵Linus Torvalds2-4/+21
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull more ext4 bugfixes from Ted Ts'o: "A number of miscellaneous ext4 bugs fixes for v3.11, including a fix so that if ext4 is built as a module, to allow it to be unloaded" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: flush the extent status cache during EXT4_IOC_SWAP_BOOT ext4: fix mount/remount error messages for incompatible mount options ext4: allow the mount options nodelalloc and data=journal
2013-08-12Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull w/w mutex deadlock injection fix from Ingo Molnar. This bug made the CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y option largely useless, but wouldn't affect normal users. * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: mutex: Fix w/w mutex deadlock injection
2013-08-12ext4: flush the extent status cache during EXT4_IOC_SWAP_BOOTTheodore Ts'o1-2/+4
Previously we weren't swapping only some of the extent_status LRU fields during the processing of the EXT4_IOC_SWAP_BOOT ioctl. The much safer thing to do is to just completely flush the extent status tree when doing the swap. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Zheng Liu <gnehzuil.liu@gmail.com> Cc: stable@vger.kernel.org
2013-08-11Linux 3.11-rc5v3.11-rc5Linus Torvalds1-1/+1
2013-08-11Merge tag 'scsi-fixes' of ↵Linus Torvalds4-19/+28
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is three bug fixes: An fnic warning caused by sleeping under a lock, a major regression with our updated WRITE SAME/UNMAP logic which caused tons of USB devices (and one RAID card) to cease to function and a megaraid_sas firmware initialisation problem which causes kdump failures" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] Don't attempt to send extended INQUIRY command if skip_vpd_pages is set [SCSI] fnic: BUG: sleeping function called from invalid context during probe [SCSI] megaraid_sas: megaraid_sas driver init fails in kdump kernel
2013-08-11Merge branch 'merge' of ↵Linus Torvalds14-99/+170
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Ben Herrenschmidt: "This includes small series from Michael Neuling to fix a couple of nasty remaining problems with the new Power8 support, also targeted at stable 3.10, without which some new userspace accessible registers aren't properly context switched, and in some case, can be clobbered by the user of transactional memory. Along with that, a few slightly more minor things, such as a missing Kconfig option to enable handling of denorm exceptions when not running under a hypervisor (or userspace will randomly crash when hitting denorms with the vector unit), some nasty bugs in the new pstore oops code, and other simple bug fixes worth having in now. Note: I picked up the two powerpc KVM fixes as Alex Graf asked me to handle KVM bits while he is on vacation. However I'll let him decide whether they should go to -stable or not when he is back" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/tm: Fix context switching TAR, PPR and DSCR SPRs powerpc: Save the TAR register earlier powerpc: Fix context switch DSCR on POWER8 powerpc: Rework setting up H/FSCR bit definitions powerpc: Fix hypervisor facility unavaliable vector number powerpc/kvm/book3s_pr: Return appropriate error when allocation fails powerpc/kvm: Add signed type cast for comparation powerpc/eeh: Add missing procfs entry for PowerNV powerpc/pseries: Add backward compatibilty to read old kernel oops-log powerpc/pseries: Fix buffer overflow when reading from pstore powerpc: On POWERNV enable PPC_DENORMALISATION by default
2013-08-11Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-9/+16
Pull s390 kvm fixes from Paolo Bonzini: "Two fixes for s390" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: fix pfmf non-quiescing control handling KVM: s390: move kvm_guest_enter,exit closer to sie
2013-08-11Merge branch 'i2c/for-current' of ↵Linus Torvalds3-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Some driver bugfixes for the I2C subsystem" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mv64xxx: Document the newly introduced allwinner compatible i2c: Fix Kontron PLD prescaler calculation i2c: i2c-mxs: Use DMA mode even for small transfers
2013-08-10Merge branch 'for-linus' of ↵Linus Torvalds8-68/+119
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "These are assorted fixes, mostly from Josef nailing down xfstests runs. Zach also has a long standing fix for problems with readdir wrapping f_pos (or ctx->pos) These patches were spread out over different bases, so I rebased things on top of rc4 and retested overnight" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: don't loop on large offsets in readdir Btrfs: check to see if root_list is empty before adding it to dead roots Btrfs: release both paths before logging dir/changed extents Btrfs: allow splitting of hole em's when dropping extent cache Btrfs: make sure the backref walker catches all refs to our extent Btrfs: fix backref walking when we hit a compressed extent Btrfs: do not offset physical if we're compressed Btrfs: fix extent buffer leak after backref walking Btrfs: fix a bug of snapshot-aware defrag to make it work on partial extents btrfs: fix file truncation if FALLOC_FL_KEEP_SIZE is specified
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-04 05:34:30 +0000