summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-11-30mm/khugepaged: collapse_shmem() stop if punched or truncatedHugh Dickins1-0/+11
Huge tmpfs testing showed that although collapse_shmem() recognizes a concurrently truncated or hole-punched page correctly, its handling of holes was liable to refill an emptied extent. Add check to stop that. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261522040.2275@eggly.anvils Fixes: f3f0e1d2150b2 ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Matthew Wilcox <willy@infradead.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30mm/huge_memory: fix lockdep complaint on 32-bit i_size_read()Hugh Dickins1-6/+13
Huge tmpfs testing, on 32-bit kernel with lockdep enabled, showed that __split_huge_page() was using i_size_read() while holding the irq-safe lru_lock and page tree lock, but the 32-bit i_size_read() uses an irq-unsafe seqlock which should not be nested inside them. Instead, read the i_size earlier in split_huge_page_to_list(), and pass the end offset down to __split_huge_page(): all while holding head page lock, which is enough to prevent truncation of that extent before the page tree lock has been taken. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261520070.2275@eggly.anvils Fixes: baa355fd33142 ("thp: file pages support for split_huge_page()") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30mm/huge_memory: splitting set mapping+index before unfreezeHugh Dickins1-6/+6
Huge tmpfs stress testing has occasionally hit shmem_undo_range()'s VM_BUG_ON_PAGE(page_to_pgoff(page) != index, page). Move the setting of mapping and index up before the page_ref_unfreeze() in __split_huge_page_tail() to fix this: so that a page cache lookup cannot get a reference while the tail's mapping and index are unstable. In fact, might as well move them up before the smp_wmb(): I don't see an actual need for that, but if I'm missing something, this way round is safer than the other, and no less efficient. You might argue that VM_BUG_ON_PAGE(page_to_pgoff(page) != index, page) is misplaced, and should be left until after the trylock_page(); but left as is has not crashed since, and gives more stringent assurance. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261516380.2275@eggly.anvils Fixes: e9b61f19858a5 ("thp: reintroduce split_huge_page()") Requires: 605ca5ede764 ("mm/huge_memory.c: reorder operations in __split_huge_page_tail()") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30mm/huge_memory: rename freeze_page() to unmap_page()Hugh Dickins2-16/+9
The term "freeze" is used in several ways in the kernel, and in mm it has the particular meaning of forcing page refcount temporarily to 0. freeze_page() is just too confusing a name for a function that unmaps a page: rename it unmap_page(), and rename unfreeze_page() remap_page(). Went to change the mention of freeze_page() added later in mm/rmap.c, but found it to be incorrect: ordinary page reclaim reaches there too; but the substance of the comment still seems correct, so edit it down. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261514080.2275@eggly.anvils Fixes: e9b61f19858a5 ("thp: reintroduce split_huge_page()") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30initramfs: clean old path before creating a hardlinkLi Zhijian1-10/+12
sys_link() can fail due to the new path already existing. This case ofen occurs when we use a concated initrd, for example: 1) prepare a basic rootfs, it contains a regular files rc.local lizhijian@:~/yocto-tiny-i386-2016-04-22$ cat etc/rc.local #!/bin/sh echo "Running /etc/rc.local..." yocto-tiny-i386-2016-04-22$ find . | sed 's,^\./,,' | cpio -o -H newc | gzip -n -9 >../rootfs.cgz 2) create a extra initrd which also includes a etc/rc.local lizhijian@:~/lkp-x86_64/etc$ echo "append initrd" >rc.local lizhijian@:~/lkp/lkp-x86_64/etc$ cat rc.local append initrd lizhijian@:~/lkp/lkp-x86_64/etc$ ln rc.local rc.local.hardlink append initrd lizhijian@:~/lkp/lkp-x86_64/etc$ stat rc.local rc.local.hardlink File: 'rc.local' Size: 14 Blocks: 8 IO Block: 4096 regular file Device: 801h/2049d Inode: 11296086 Links: 2 Access: (0664/-rw-rw-r--) Uid: ( 1002/lizhijian) Gid: ( 1002/lizhijian) Access: 2018-11-15 16:08:28.654464815 +0800 Modify: 2018-11-15 16:07:57.514903210 +0800 Change: 2018-11-15 16:08:24.180228872 +0800 Birth: - File: 'rc.local.hardlink' Size: 14 Blocks: 8 IO Block: 4096 regular file Device: 801h/2049d Inode: 11296086 Links: 2 Access: (0664/-rw-rw-r--) Uid: ( 1002/lizhijian) Gid: ( 1002/lizhijian) Access: 2018-11-15 16:08:28.654464815 +0800 Modify: 2018-11-15 16:07:57.514903210 +0800 Change: 2018-11-15 16:08:24.180228872 +0800 Birth: - lizhijian@:~/lkp/lkp-x86_64$ find . | sed 's,^\./,,' | cpio -o -H newc | gzip -n -9 >../rc-local.cgz lizhijian@:~/lkp/lkp-x86_64$ gzip -dc ../rc-local.cgz | cpio -t . etc etc/rc.local.hardlink <<< it will be extracted first at this initrd etc/rc.local 3) concate 2 initrds and boot lizhijian@:~/lkp$ cat rootfs.cgz rc-local.cgz >concate-initrd.cgz lizhijian@:~/lkp$ qemu-system-x86_64 -nographic -enable-kvm -cpu host -smp 1 -m 1024 -kernel ~/lkp/linux/arch/x86/boot/bzImage -append "console=ttyS0 earlyprint=ttyS0 ignore_loglevel" -initrd ./concate-initr.cgz -serial stdio -nodefaults In this case, sys_link(2) will fail and return -EEXIST, so we can only get the rc.local at rootfs.cgz instead of rc-local.cgz [akpm@linux-foundation.org: move code to avoid forward declaration] Link: http://lkml.kernel.org/r/1542352368-13299-1-git-send-email-lizhijian@cn.fujitsu.com Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Cc: Philip Li <philip.li@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Li Zhijian <zhijianx.li@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notraceAnders Roxell1-2/+2
Since __sanitizer_cov_trace_pc() is marked as notrace, function calls in __sanitizer_cov_trace_pc() shouldn't be traced either. ftrace_graph_caller() gets called for each function that isn't marked 'notrace', like canonicalize_ip(). This is the call trace from a run: [ 139.644550] ftrace_graph_caller+0x1c/0x24 [ 139.648352] canonicalize_ip+0x18/0x28 [ 139.652313] __sanitizer_cov_trace_pc+0x14/0x58 [ 139.656184] sched_clock+0x34/0x1e8 [ 139.659759] trace_clock_local+0x40/0x88 [ 139.663722] ftrace_push_return_trace+0x8c/0x1f0 [ 139.667767] prepare_ftrace_return+0xa8/0x100 [ 139.671709] ftrace_graph_caller+0x1c/0x24 Rework so that check_kcov_mode() and canonicalize_ip() that are called from __sanitizer_cov_trace_pc() are also marked as notrace. Link: http://lkml.kernel.org/r/20181128081239.18317-1-anders.roxell@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signen-off-by: Anders Roxell <anders.roxell@linaro.org> Co-developed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30psi: make disabling/enabling easier for vendor kernelsJohannes Weiner5-14/+40
Mel Gorman reports a hackbench regression with psi that would prohibit shipping the suse kernel with it default-enabled, but he'd still like users to be able to opt in at little to no cost to others. With the current combination of CONFIG_PSI and the psi_disabled bool set from the commandline, this is a challenge. Do the following things to make it easier: 1. Add a config option CONFIG_PSI_DEFAULT_DISABLED that allows distros to enable CONFIG_PSI in their kernel but leave the feature disabled unless a user requests it at boot-time. To avoid double negatives, rename psi_disabled= to psi=. 2. Make psi_disabled a static branch to eliminate any branch costs when the feature is disabled. In terms of numbers before and after this patch, Mel says: : The following is a comparision using CONFIG_PSI=n as a baseline against : your patch and a vanilla kernel : : 4.20.0-rc4 4.20.0-rc4 4.20.0-rc4 : kconfigdisable-v1r1 vanilla psidisable-v1r1 : Amean 1 1.3100 ( 0.00%) 1.3923 ( -6.28%) 1.3427 ( -2.49%) : Amean 3 3.8860 ( 0.00%) 4.1230 * -6.10%* 3.8860 ( -0.00%) : Amean 5 6.8847 ( 0.00%) 8.0390 * -16.77%* 6.7727 ( 1.63%) : Amean 7 9.9310 ( 0.00%) 10.8367 * -9.12%* 9.9910 ( -0.60%) : Amean 12 16.6577 ( 0.00%) 18.2363 * -9.48%* 17.1083 ( -2.71%) : Amean 18 26.5133 ( 0.00%) 27.8833 * -5.17%* 25.7663 ( 2.82%) : Amean 24 34.3003 ( 0.00%) 34.6830 ( -1.12%) 32.0450 ( 6.58%) : Amean 30 40.0063 ( 0.00%) 40.5800 ( -1.43%) 41.5087 ( -3.76%) : Amean 32 40.1407 ( 0.00%) 41.2273 ( -2.71%) 39.9417 ( 0.50%) : : It's showing that the vanilla kernel takes a hit (as the bisection : indicated it would) and that disabling PSI by default is reasonably : close in terms of performance for this particular workload on this : particular machine so; Link: http://lkml.kernel.org/r/20181127165329.GA29728@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Tested-by: Mel Gorman <mgorman@techsingularity.net> Reported-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30proc: fixup map_files test on armAlexey Dobriyan1-2/+7
https://bugs.linaro.org/show_bug.cgi?id=3782 Turns out arm doesn't permit mapping address 0, so try minimum virtual address instead. Link: http://lkml.kernel.org/r/20181113165446.GA28157@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reported-by: Rafael David Tinoco <rafael.tinoco@linaro.org> Tested-by: Rafael David Tinoco <rafael.tinoco@linaro.org> Acked-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30debugobjects: avoid recursive calls with kmemleakQian Cai1-3/+2
CONFIG_DEBUG_OBJECTS_RCU_HEAD does not play well with kmemleak due to recursive calls. fill_pool kmemleak_ignore make_black_object put_object __call_rcu (kernel/rcu/tree.c) debug_rcu_head_queue debug_object_activate debug_object_init fill_pool kmemleak_ignore make_black_object ... So add SLAB_NOLEAKTRACE to kmem_cache_create() to not register newly allocated debug objects at all. Link: http://lkml.kernel.org/r/20181126165343.2339-1-cai@gmx.us Signed-off-by: Qian Cai <cai@gmx.us> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Waiman Long <longman@redhat.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not setAndrea Arcangeli1-0/+11
Set the page dirty if VM_WRITE is not set because in such case the pte won't be marked dirty and the page would be reclaimed without writepage (i.e. swapout in the shmem case). This was found by source review. Most apps (certainly including QEMU) only use UFFDIO_COPY on PROT_READ|PROT_WRITE mappings or the app can't modify the memory in the first place. This is for correctness and it could help the non cooperative use case to avoid unexpected data loss. Link: http://lkml.kernel.org/r/20181126173452.26955-6-aarcange@redhat.com Reviewed-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support") Reported-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30userfaultfd: shmem: add i_size checksAndrea Arcangeli2-4/+40
With MAP_SHARED: recheck the i_size after taking the PT lock, to serialize against truncate with the PT lock. Delete the page from the pagecache if the i_size_read check fails. With MAP_PRIVATE: check the i_size after the PT lock before mapping anonymous memory or zeropages into the MAP_PRIVATE shmem mapping. A mostly irrelevant cleanup: like we do the delete_from_page_cache() pagecache removal after dropping the PT lock, the PT lock is a spinlock so drop it before the sleepable page lock. Link: http://lkml.kernel.org/r/20181126173452.26955-5-aarcange@redhat.com Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support") Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Hugh Dickins <hughd@google.com> Reported-by: Jann Horn <jannh@google.com> Cc: <stable@vger.kernel.org> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30userfaultfd: shmem/hugetlbfs: only allow to register VM_MAYWRITE vmasAndrea Arcangeli2-9/+21
After the VMA to register the uffd onto is found, check that it has VM_MAYWRITE set before allowing registration. This way we inherit all common code checks before allowing to fill file holes in shmem and hugetlbfs with UFFDIO_COPY. The userfaultfd memory model is not applicable for readonly files unless it's a MAP_PRIVATE. Link: http://lkml.kernel.org/r/20181126173452.26955-4-aarcange@redhat.com Fixes: ff62a3421044 ("hugetlb: implement memfd sealing") Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Hugh Dickins <hughd@google.com> Reported-by: Jann Horn <jannh@google.com> Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support") Cc: <stable@vger.kernel.org> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30userfaultfd: shmem: allocate anonymous memory for MAP_PRIVATE shmemAndrea Arcangeli1-2/+13
Userfaultfd did not create private memory when UFFDIO_COPY was invoked on a MAP_PRIVATE shmem mapping. Instead it wrote to the shmem file, even when that had not been opened for writing. Though, fortunately, that could only happen where there was a hole in the file. Fix the shmem-backed implementation of UFFDIO_COPY to create private memory for MAP_PRIVATE mappings. The hugetlbfs-backed implementation was already correct. This change is visible to userland, if userfaultfd has been used in unintended ways: so it introduces a small risk of incompatibility, but is necessary in order to respect file permissions. An app that uses UFFDIO_COPY for anything like postcopy live migration won't notice the difference, and in fact it'll run faster because there will be no copy-on-write and memory waste in the tmpfs pagecache anymore. Userfaults on MAP_PRIVATE shmem keep triggering only on file holes like before. The real zeropage can also be built on a MAP_PRIVATE shmem mapping through UFFDIO_ZEROPAGE and that's safe because the zeropage pte is never dirty, in turn even an mprotect upgrading the vma permission from PROT_READ to PROT_READ|PROT_WRITE won't make the zeropage pte writable. Link: http://lkml.kernel.org/r/20181126173452.26955-3-aarcange@redhat.com Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support") Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30userfaultfd: use ENOENT instead of EFAULT if the atomic copy user failsAndrea Arcangeli3-5/+5
Patch series "userfaultfd shmem updates". Jann found two bugs in the userfaultfd shmem MAP_SHARED backend: the lack of the VM_MAYWRITE check and the lack of i_size checks. Then looking into the above we also fixed the MAP_PRIVATE case. Hugh by source review also found a data loss source if UFFDIO_COPY is used on shmem MAP_SHARED PROT_READ mappings (the production usages incidentally run with PROT_READ|PROT_WRITE, so the data loss couldn't happen in those production usages like with QEMU). The whole patchset is marked for stable. We verified QEMU postcopy live migration with guest running on shmem MAP_PRIVATE run as well as before after the fix of shmem MAP_PRIVATE. Regardless if it's shmem or hugetlbfs or MAP_PRIVATE or MAP_SHARED, QEMU unconditionally invokes a punch hole if the guest mapping is filebacked and a MADV_DONTNEED too (needed to get rid of the MAP_PRIVATE COWs and for the anon backend). This patch (of 5): We internally used EFAULT to communicate with the caller, switch to ENOENT, so EFAULT can be used as a non internal retval. Link: http://lkml.kernel.org/r/20181126173452.26955-2-aarcange@redhat.com Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support") Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Hugh Dickins <hughd@google.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Jann Horn <jannh@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: <stable@vger.kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30lib/test_kmod.c: fix rmmod double freeLuis Chamberlain1-1/+0
We free the misc device string twice on rmmod; fix this. Without this we cannot remove the module without crashing. Link: http://lkml.kernel.org/r/20181124050500.5257-1-mcgrof@kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Reported-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: <stable@vger.kernel.org> [4.12+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30hfsplus: do not free node before usingPan Bian1-1/+2
hfs_bmap_free() frees node via hfs_bnode_put(node). However it then reads node->this when dumping error message on an error path, which may result in a use-after-free bug. This patch frees node only when it is never used. Link: http://lkml.kernel.org/r/1543053441-66942-1-git-send-email-bianpan2016@163.com Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Ernesto A. Fernandez <ernesto.mnd.fernandez@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Viacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30hfs: do not free node before usingPan Bian1-1/+2
hfs_bmap_free() frees the node via hfs_bnode_put(node). However, it then reads node->this when dumping error message on an error path, which may result in a use-after-free bug. This patch frees the node only when it is never again used. Link: http://lkml.kernel.org/r/1542963889-128825-1-git-send-email-bianpan2016@163.com Fixes: a1185ffa2fc ("HFS rewrite") Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joe Perches <joe@perches.com> Cc: Ernesto A. Fernandez <ernesto.mnd.fernandez@gmail.com> Cc: Viacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30proc: update MAINTAINERS with proc.txtAlexey Dobriyan1-0/+1
Turns out that /proc has official documentation and people even trying to keep it uptodate. Link: http://lkml.kernel.org/r/20181116134630.GA8004@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30mm/page_alloc.c: fix calculation of pgdat->nr_zonesWei Yang1-1/+3
init_currently_empty_zone() will adjust pgdat->nr_zones and set it to 'zone_idx(zone) + 1' unconditionally. This is correct in the normal case, while not exact in hot-plug situation. This function is used in two places: * free_area_init_core() * move_pfn_range_to_zone() In the first case, we are sure zone index increase monotonically. While in the second one, this is under users control. One way to reproduce this is: ---------------------------- 1. create a virtual machine with empty node1 -m 4G,slots=32,maxmem=32G \ -smp 4,maxcpus=8 \ -numa node,nodeid=0,mem=4G,cpus=0-3 \ -numa node,nodeid=1,mem=0G,cpus=4-7 2. hot-add cpu 3-7 cpu-add [3-7] 2. hot-add memory to nod1 object_add memory-backend-ram,id=ram0,size=1G device_add pc-dimm,id=dimm0,memdev=ram0,node=1 3. online memory with following order echo online_movable > memory47/state echo online > memory40/state After this, node1 will have its nr_zones equals to (ZONE_NORMAL + 1) instead of (ZONE_MOVABLE + 1). Michal said: "Having an incorrect nr_zones might result in all sorts of problems which would be quite hard to debug (e.g. reclaim not considering the movable zone). I do not expect many users would suffer from this it but still this is trivial and obviously right thing to do so backporting to the stable tree shouldn't be harmful (last famous words)" Link: http://lkml.kernel.org/r/20181117022022.9956-1-richard.weiyang@gmail.com Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30mm: use swp_offset as key in shmem_replace_page()Yu Zhao1-2/+4
We changed the key of swap cache tree from swp_entry_t.val to swp_offset. We need to do so in shmem_replace_page() as well. Hugh said: "shmem_replace_page() has been wrong since the day I wrote it: good enough to work on swap "type" 0, which is all most people ever use (especially those few who need shmem_replace_page() at all), but broken once there are any non-0 swp_type bits set in the higher order bits" Link: http://lkml.kernel.org/r/20181121215442.138545-1-yuzhao@google.com Fixes: f6ab1f7f6b2d ("mm, swap: use offset of swap entry as key of swap cache") Signed-off-by: Yu Zhao <yuzhao@google.com> Reviewed-by: Matthew Wilcox <willy@infradead.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [4.9+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30mm: cleancache: fix corruption on missed inode invalidationPavel Tikhomirov1-2/+6
If all pages are deleted from the mapping by memory reclaim and also moved to the cleancache: __delete_from_page_cache (no shadow case) unaccount_page_cache_page cleancache_put_page page_cache_delete mapping->nrpages -= nr (nrpages becomes 0) We don't clean the cleancache for an inode after final file truncation (removal). truncate_inode_pages_final check (nrpages || nrexceptional) is false no truncate_inode_pages no cleancache_invalidate_inode(mapping) These way when reading the new file created with same inode we may get these trash leftover pages from cleancache and see wrong data instead of the contents of the new file. Fix it by always doing truncate_inode_pages which is already ready for nrpages == 0 && nrexceptional == 0 case and just invalidates inode. [akpm@linux-foundation.org: add comment, per Jan] Link: http://lkml.kernel.org/r/20181112095734.17979-1-ptikhomirov@virtuozzo.com Fixes: commit 91b0abe36a7b ("mm + fs: store shadow entries in page cache") Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Reviewed-by: Vasily Averin <vvs@virtuozzo.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30ocfs2: fix deadlock caused by ocfs2_defrag_extent()Larry Chen1-21/+26
ocfs2_defrag_extent may fall into deadlock. ocfs2_ioctl_move_extents ocfs2_ioctl_move_extents ocfs2_move_extents ocfs2_defrag_extent ocfs2_lock_allocators_move_extents ocfs2_reserve_clusters inode_lock GLOBAL_BITMAP_SYSTEM_INODE __ocfs2_flush_truncate_log inode_lock GLOBAL_BITMAP_SYSTEM_INODE As backtrace shows above, ocfs2_reserve_clusters() will call inode_lock against the global bitmap if local allocator has not sufficient cluters. Once global bitmap could meet the demand, ocfs2_reserve_cluster will return success with global bitmap locked. After ocfs2_reserve_cluster(), if truncate log is full, __ocfs2_flush_truncate_log() will definitely fall into deadlock because it needs to inode_lock global bitmap, which has already been locked. To fix this bug, we could remove from ocfs2_lock_allocators_move_extents() the code which intends to lock global allocator, and put the removed code after __ocfs2_flush_truncate_log(). ocfs2_lock_allocators_move_extents() is referred by 2 places, one is here, the other does not need the data allocator context, which means this patch does not affect the caller so far. Link: http://lkml.kernel.org/r/20181101071422.14470-1-lchen@suse.com Signed-off-by: Larry Chen <lchen@suse.com> Reviewed-by: Changwei Ge <ge.changwei@h3c.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30mm/gup: finish consolidating error handlingJohn Hubbard1-2/+1
Commit df06b37ffe5a ("mm/gup: cache dev_pagemap while pinning pages") attempted to operate on each page that get_user_pages had retrieved. In order to do that, it created a common exit point from the routine. However, one case was missed, which this patch fixes up. Also, there was still an unnecessary shadow declaration (with a different type) of the "ret" variable, which this patch removes. Keith's description of the situation is: This also fixes a potentially leaked dev_pagemap reference count if a failure occurs when an iteration crosses a vma boundary. I don't think it's normal to have different vma's on a users mapped zone device memory, but good to fix anyway. I actually thought that this code: /* first iteration or cross vma bound */ if (!vma || start >= vma->vm_end) { vma = find_extend_vma(mm, start); if (!vma && in_gate_area(mm, start)) { ret = get_gate_page(mm, start & PAGE_MASK, gup_flags, &vma, pages ? &pages[i] : NULL); if (ret) goto out; dealt with the "you're trying to pin the gate page, as part of this call", rather than the generic case of crossing a vma boundary. (I think there's a fine point that I must be overlooking.) But it's still a valid case, either way. Link: http://lkml.kernel.org/r/20181121081402.29641-2-jhubbard@nvidia.com Fixes: df06b37ffe5a4 ("mm/gup: cache dev_pagemap while pinning pages") Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30MAINTAINERS: name change for LuisLuis Chamberlain1-6/+6
My name has changed, works better than Global Entry I tell ya. Link: http://lkml.kernel.org/r/20181122003138.7752-1-mcgrof@kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30Merge tag 'char-misc-4.20-rc5' of ↵Linus Torvalds8-25/+67
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are a few small char/misc driver fixes for 4.20-rc5 that resolve a number of reported issues. The "largest" here is the thunderbolt patch, which resolves an issue with NVM upgrade, the smallest being some fsi driver fixes. There's also a hyperv bugfix, and the usual binder bugfixes. All of these have been in linux-next with no reported issues" * tag 'char-misc-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: misc: mic/scif: fix copy-paste error in scif_create_remote_lookup thunderbolt: Prevent root port runtime suspend during NVM upgrade Drivers: hv: vmbus: check the creation_status in vmbus_establish_gpadl() binder: fix race that allows malicious free of live buffer fsi: fsi-scom.c: Remove duplicate header fsi: master-ast-cf: select GENERIC_ALLOCATOR
2018-11-30Merge tag 'driver-core-4.20-rc5' of ↵Linus Torvalds1-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is a single driver core fix for 4.20-rc5 It resolves an issue with the data alignment in 'struct devres' for the ARC platform. The full details are in the commit changelog, but the short summary is the change is a single line: - unsigned long long data[]; /* guarantee ull alignment */ + u8 __aligned(ARCH_KMALLOC_MINALIGN) data[]; This has been in linux-next for a while with no reported issues" * tag 'driver-core-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: devres: Align data[] to ARCH_KMALLOC_MINALIGN
2018-11-30Merge tag 'staging-4.20-rc5' of ↵Linus Torvalds24-72/+103
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver fixes from Greg KH: "Here are some small IIO and staging driver fixes for 4.20-rc5. Nothing major, the IIO fix ended up touching the HID drivers at the same time, but the HID maintainer acked it. The staging fixes are all minor patches for reported issues and regressions, full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers staging: vchiq_arm: fix compat VCHIQ_IOC_AWAIT_COMPLETION staging: mt7621-pinctrl: fix uninitialized variable ngroups staging: rtl8723bs: Add missing return for cfg80211_rtw_get_station staging: most: use format specifier "%s" in snprintf staging: rtl8723bs: Fix incorrect sense of ether_addr_equal staging: mt7621-dma: fix potentially dereferencing uninitialized 'tx_desc' staging: comedi: clarify/unify macros for NI macro-defined terminals drivers: staging: cedrus: find ctx before dereferencing it ctx staging: rtl8723bs: Fix the return value in case of error in 'rtw_wx_read32()' staging: comedi: ni_mio_common: scale ao INSN_CONFIG_GET_CMD_TIMING_CONSTRAINTS iio:st_magn: Fix enable device after trigger
2018-11-30Merge tag 'usb-4.20-rc5' of ↵Linus Torvalds8-85/+86
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY driver fixes from Greg KH: "Here are some small USB and PHY driver fixes for 4.20-rc5 Nothing big at all, just the usual handful of USB fixes for reported issues, along with some gadget and PHY driver bug fixes. All of these have been in linux-next with no reported issues. Note, the USB gadget fixes were in linux-next on its own branch, not in mine, it just got merged into here yesterday and missed linux-next of today" * tag 'usb-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: u_ether: fix unsafe list iteration USB: omap_udc: fix rejection of out transfers when DMA is used USB: omap_udc: fix USB gadget functionality on Palm Tungsten E USB: omap_udc: fix omap_udc_start() on 15xx machines USB: omap_udc: fix crashes on probe error and module removal USB: omap_udc: use devm_request_irq() usb: core: quirks: add RESET_RESUME quirk for Cherry G230 Stream series USB: usb-storage: Add new IDs to ums-realtek Revert "usb: dwc3: gadget: skip Set/Clear Halt when invalid" phy: qcom-qusb2: Fix HSTX_TRIM tuning with fused value for SDM845 phy: qcom-qusb2: Use HSTX_TRIM fused value as is dt-bindings: phy-qcom-qmp: Fix several mistakes from prior commits phy: uniphier-pcie: Depend on HAS_IOMEM
2018-11-30Merge tag 'mtd/fixes-for-4.20-rc5' of git://git.infradead.org/linux-mtdLinus Torvalds2-3/+31
Pull mtd fixes from Boris Brezillon: "NAND fix: - Fix BBT cache allocation done in nanddev_bbt_init() SPI NOR fixes: - Fix the erase type selection logic" * tag 'mtd/fixes-for-4.20-rc5' of git://git.infradead.org/linux-mtd: mtd: nand: Fix memory allocation in nanddev_bbt_init() mtd: spi-nor: fix erase_type array to indicate current map conf
2018-11-30test_hexdump: use memcpy instead of strncpyLinus Torvalds1-1/+1
New versions of gcc reasonably warn about the odd pattern of strncpy(p, q, strlen(q)); which really doesn't make sense: the strncpy() ends up being just a slow and odd way to write memcpy() in this case. Apparently there was a patch for this floating around earlier, but it got lost. Acked-again-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds12-82/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: - MCE related boot crash fix on certain AMD systems - FPU exception handling fix - FPU handling race fix - revert+rewrite of the RSDP boot protocol extension, use boot_params instead - documentation fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/MCE/AMD: Fix the thresholding machinery initialization order x86/fpu: Use the correct exception table macro in the XSTATE_OP wrapper x86/fpu: Disable bottom halves while loading FPU registers x86/acpi, x86/boot: Take RSDP address from boot params if available x86/boot: Mostly revert commit ae7e1238e68f2a ("Add ACPI RSDP address to setup_header") x86/ptrace: Fix documentation for tracehook_report_syscall_entry()
2018-11-30Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds21-47/+166
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixes: - counter freezing related regression fix - uprobes race fix - Intel PMU unusual event combination fix - .. and diverse tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: uprobes: Fix handle_swbp() vs. unregister() + register() race once more perf/x86/intel: Disallow precise_ip on BTS events perf/x86/intel: Add generic branch tracing check to intel_pmu_has_bts() perf/x86/intel: Move branch tracing setup to the Intel-specific source file perf/x86/intel: Fix regression by default disabling perfmon v4 interrupt handling perf tools beauty ioctl: Support new ISO7816 commands tools uapi asm-generic: Synchronize ioctls.h tools arch x86: Update tools's copy of cpufeatures.h tools headers uapi: Synchronize i915_drm.h perf tools: Restore proper cwd on return from mnt namespace tools build feature: Check if get_current_dir_name() is available perf tools: Fix crash on synthesizing the unit
2018-11-30Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds1-10/+26
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fix from Ingo Molnar: "An arm64 warning fix" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Prevent GICv3 WARN() by mapping the memreserve table before first use
2018-11-30Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds1-4/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Ingo Molnar: "Two fixes for boundary conditions" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix segfault in .cold detection with -ffunction-sections objtool: Fix double-free in .cold detection error path
2018-11-30Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds12-125/+189
Pull vfs fixes from Al Viro: "Assorted fixes all over the place. The iov_iter one is this cycle regression (splice from UDP triggering WARN_ON()), the rest is older" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: afs: Use d_instantiate() rather than d_add() and don't d_drop() afs: Fix missing net error handling afs: Fix validation/callback interaction iov_iter: teach csum_and_copy_to_iter() to handle pipe-backed ones exportfs: do not read dentry after free exportfs: fix 'passing zero to ERR_PTR()' warning aio: fix failure to put the file pointer sysv: return 'err' instead of 0 in __sysv_write_inode
2018-11-30Merge tag 'trace-v4.20-rc4' of ↵Linus Torvalds5-6/+65
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull more tracing fixes from Steven Rostedt: "Two more fixes: - Change idx variable in DO_TRACE macro to __idx to avoid name conflicts. A kvm event had "idx" as a parameter and it confused the macro. - Fix a race where interrupts would be traced when set_graph_function was set. The previous patch set increased a race window that tricked the function graph tracer to think it should trace interrupts when it really should not have. The bug has been there before, but was seldom hit. Only the last patch series made it more common" * tag 'trace-v4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/fgraph: Fix set_graph_function from showing interrupts tracepoint: Use __idx instead of idx in DO_TRACE macro to make it unique
2018-11-30Merge tag 'trace-v4.20-rc3' of ↵Linus Torvalds17-175/+78
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "While rewriting the function graph tracer, I discovered a design flaw that was introduced by a patch that tried to fix one bug, but by doing so created another bug. As both bugs corrupt the output (but they do not crash the kernel), I decided to fix the design such that it could have both bugs fixed. The original fix, fixed time reporting of the function graph tracer when doing a max_depth of one. This was code that can test how much the kernel interferes with userspace. But in doing so, it could corrupt the time keeping of the function profiler. The issue is that the curr_ret_stack variable was being used for two different meanings. One was to keep track of the stack pointer on the ret_stack (shadow stack used by the function graph tracer), and the other use case was the graph call depth. Although, the two may be closely related, where they got updated was the issue that lead to the two different bugs that required the two use cases to be updated differently. The big issue with this fix is that it requires changing each architecture. The good news is, I was able to remove a lot of code that was duplicated within the architectures and place it into a single location. Then I could make the fix in one place. I pushed this code into linux-next to let it settle over a week, and before doing so, I cross compiled all the affected architectures to make sure that they built fine. In the mean time, I also pulled in a patch that fixes the sched_switch previous tasks state output, that was not actually correct" * tag 'trace-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: sched, trace: Fix prev_state output in sched_switch tracepoint function_graph: Have profiler use curr_ret_stack and not depth function_graph: Reverse the order of pushing the ret_stack and the callback function_graph: Move return callback before update of curr_ret_stack function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack function_graph: Make ftrace_push_return_trace() static sparc/function_graph: Simplify with function_graph_enter() sh/function_graph: Simplify with function_graph_enter() s390/function_graph: Simplify with function_graph_enter() riscv/function_graph: Simplify with function_graph_enter() powerpc/function_graph: Simplify with function_graph_enter() parisc: function_graph: Simplify with function_graph_enter() nds32: function_graph: Simplify with function_graph_enter() MIPS: function_graph: Simplify with function_graph_enter() microblaze: function_graph: Simplify with function_graph_enter() arm64: function_graph: Simplify with function_graph_enter() ARM: function_graph: Simplify with function_graph_enter() x86/function_graph: Simplify with function_graph_enter() function_graph: Create function_graph_enter() to consolidate architecture code
2018-11-30Merge tag 'drm-fixes-2018-11-30' of git://anongit.freedesktop.org/drm/drmLinus Torvalds14-33/+110
Pull drm fixes from Dave Airlie: "This weeks instalment of fixes. Looks fairly like business as usual and everything seems to rolling along. There was one MST fix applied and reverted in the misc tree, but otherwise nothing too strange in here. core: - incorrect master setting on error fix i915: - only GVT fixes this week: * one MOCS register load * rpm lock fix * use after free rcar-du: - regression fix for group start amdgpu: - DP MST fix - GPUVM fix for huge pages - RLC fix for vega20 ast: - fix EDID reading stability - ioreg free fix meson: - sleep in irq fix - vblank fixes - array boundary fix" * tag 'drm-fixes-2018-11-30' of git://anongit.freedesktop.org/drm/drm: drm/ast: fixed reading monitor EDID not stable issue drm/ast: Fix incorrect free on ioregs Revert "drm/dp_mst: Skip validating ports during destruction, just ref" drm/amdgpu: Add delay after enable RLC ucode drm/amdgpu: Avoid endless loop in GPUVM fragment processing drm/amdgpu: Cast to uint64_t before left shift drm/meson: add support for 1080p25 mode drm/meson: Fix OOB memory accesses in meson_viu_set_osd_lut() drm/meson: Enable fast_io in meson_dw_hdmi_regmap_config drm/meson: Fixes for drm_crtc_vblank_on/off support drm: set is_master to 0 upon drm_new_set_master() failure drm/dp_mst: Skip validating ports during destruction, just ref drm: rcar-du: Fix DU3 start/stop on M3-N drm/amd/dm: Understand why attaching path/tile properties are needed drm/amd/dm: Don't forget to attach MST encoders drm/i915/gvt: Avoid use-after-free iterating the gtt list drm/i915/gvt: ensure gpu is powered before do i915_gem_gtt_insert drm/i915/gvt: not to touch undefined MOCS registers
2018-11-30Merge tag 'pstore-v4.20-rc5' of ↵Linus Torvalds2-10/+10
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull pstore fix from Kees Cook: "Fix corrupted compression due to unlucky size choice with ECC" * tag 'pstore-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: Correctly calculate usable PRZ bytes
2018-11-30Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds11-123/+121
Pull rdma fixes from Jason Gunthorpe: "This is a bit later than usual for our first -rc but I'm not seeing anything worry-some in the RDMA tree right now. Quiet so far this -rc cycle, only a few internal driver related bugs and a small series fixing ODP bugs found by more advanced testing. A set of small driver and core code fixes: - Small series fixing longtime user triggerable bugs in the ODP processing inside mlx5 and core code - Various small driver malfunctions and crashes (use after, free, error unwind, implementation bugs) - A misfunction of the RDMA GID cache that can be triggered by the administrator" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/mlx5: Initialize return variable in case pagefault was skipped IB/mlx5: Fix page fault handling for MW IB/umem: Set correct address to the invalidation function IB/mlx5: Skip non-ODP MR when handling a page fault RDMA/hns: Bugfix pbl configuration for rereg mr iser: set sector for ambiguous mr status errors RDMA/rdmavt: Fix rvt_create_ah function signature IB/mlx5: Avoid load failure due to unknown link width IB/mlx5: Fix XRC QP support after introducing extended atomic RDMA/bnxt_re: Avoid accessing the device structure after it is freed RDMA/bnxt_re: Fix system hang when registration with L2 driver fails RDMA/core: Add GIDs while changing MAC addr only for registered ndev RDMA/mlx5: Fix fence type for IB_WR_LOCAL_INV WR net/mlx5: Fix XRC SRQ umem valid bits
2018-11-29tracing/fgraph: Fix set_graph_function from showing interruptsSteven Rostedt (VMware)4-3/+62
The tracefs file set_graph_function is used to only function graph functions that are listed in that file (or all functions if the file is empty). The way this is implemented is that the function graph tracer looks at every function, and if the current depth is zero and the function matches something in the file then it will trace that function. When other functions are called, the depth will be greater than zero (because the original function will be at depth zero), and all functions will be traced where the depth is greater than zero. The issue is that when a function is first entered, and the handler that checks this logic is called, the depth is set to zero. If an interrupt comes in and a function in the interrupt handler is traced, its depth will be greater than zero and it will automatically be traced, even if the original function was not. But because the logic only looks at depth it may trace interrupts when it should not be. The recent design change of the function graph tracer to fix other bugs caused the depth to be zero while the function graph callback handler is being called for a longer time, widening the race of this happening. This bug was actually there for a longer time, but because the race window was so small it seldom happened. The Fixes tag below is for the commit that widen the race window, because that commit belongs to a series that will also help fix the original bug. Cc: stable@kernel.org Fixes: 39eb456dacb5 ("function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack") Reported-by: Joe Lawrence <joe.lawrence@redhat.com> Tested-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-11-29tracepoint: Use __idx instead of idx in DO_TRACE macro to make it uniqueZenghui Yu1-3/+3
After enabling KVM event tracing, almost all of trace_kvm_exit()'s printk shows "kvm_exit: IRQ: ..." even if the actual exception_type is NOT IRQ. More specifically, trace_kvm_exit() is defined in virt/kvm/arm/trace.h by TRACE_EVENT. This slight problem may have existed after commit e6753f23d961 ("tracepoint: Make rcuidle tracepoint callers use SRCU"). There are two variables in trace_kvm_exit() and __DO_TRACE() which have the same name, *idx*. Thus the actual value of *idx* will be overwritten when tracing. Fix it by adding a simple prefix. Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Wang Haibin <wanghaibin.wang@huawei.com> Cc: linux-trace-devel@vger.kernel.org Cc: stable@vger.kernel.org Fixes: e6753f23d961 ("tracepoint: Make rcuidle tracepoint callers use SRCU") Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-11-29afs: Use d_instantiate() rather than d_add() and don't d_drop()David Howells1-3/+1
Use d_instantiate() rather than d_add() and don't d_drop() in afs_vnode_new_inode(). The dentry shouldn't be removed as it's not changing its name. Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-11-29afs: Fix missing net error handlingDavid Howells6-113/+135
kAFS can be given certain network errors (EADDRNOTAVAIL, EHOSTDOWN and ERFKILL) that it doesn't handle in its server/address rotation algorithms. They cause the probing and rotation to abort immediately rather than rotating. Fix this by: (1) Abstracting out the error prioritisation from the VL and FS rotation algorithms into a common function and expand usage into the server probing code. When multiple errors are available, this code selects the one we'd prefer to return. (2) Add handling for EADDRNOTAVAIL, EHOSTDOWN and ERFKILL. Fixes: 0fafdc9f888b ("afs: Fix file locking") Fixes: 0338747d8454 ("afs: Probe multiple fileservers simultaneously") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-11-29afs: Fix validation/callback interactionDavid Howells1-6/+12
When afs_validate() is called to validate a vnode (inode), there are two unhandled cases in the fastpath at the top of the function: (1) If the vnode is promised (AFS_VNODE_CB_PROMISED is set), the break counters match and the data has expired, then there's an implicit case in which the vnode needs revalidating. This has no consequences since the default "valid = false" set at the top of the function happens to do the right thing. (2) If the vnode is not promised and it hasn't been deleted (AFS_VNODE_DELETED is not set) then there's a default case we're not handling in which the vnode is invalid. If the vnode is invalid, we need to bring cb_s_break and cb_v_break up to date before we refetch the status. As a consequence, once the server loses track of the client (ie. sufficient time has passed since we last sent it an operation), it will send us a CB.InitCallBackState* operation when we next try to talk to it. This calls afs_init_callback_state() which increments afs_server::cb_s_break, but this then doesn't propagate to the afs_vnode record. The result being that every afs_validate() call thereafter sends a status fetch operation to the server. Clarify and fix this by: (A) Setting valid in all the branches rather than initialising it at the top so that the compiler catches where we've missed. (B) Restructuring the logic in the 'promised' branch so that we set valid to false if the callback is due to expire (or has expired) and so that the final case is that the vnode is still valid. (C) Adding an else-statement that ups cb_s_break and cb_v_break if the promised and deleted cases don't match. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-11-29Merge tag 'acpi-4.20-rc5' of ↵Linus Torvalds1-19/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Fix a recent regression in ACPICA releted to the Generic Serial Bus protocol handling and causing it to read or write too little or too much data in some cases, so incorrect data may be written to hardware as a result (Hans de Goede)" * tag 'acpi-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Fix handling of buffer-size in acpi_ex_write_data_to_field()
2018-11-29Merge tag 'pm-4.20-rc5' of ↵Linus Torvalds2-5/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix two issues in the operating performance points (OPP) framework. Specifics: - Fix the handling of the "operating-points-v2" property to avoid failures if multiple phandles are present in it which is legitimate (Viresh Kumar). - Drop the unnecessary static initialization of the .owner field in the ti_opp_supply_driver structure (YueHaibing)" * tag 'pm-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: OPP: Fix parsing of multiple phandles in "operating-points-v2" property opp: ti-opp-supply: Fix platform_no_drv_owner.cocci warnings
2018-11-29RDMA/mlx5: Initialize return variable in case pagefault was skippedLeon Romanovsky1-0/+1
Pagefaults occurred in non-ODP MR are completely valid events, so initialize return variable to 0. Fixes: 4d5422a309de ("IB/mlx5: Skip non-ODP MR when handling a page fault") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-29pstore/ram: Correctly calculate usable PRZ bytesKees Cook2-10/+10
The actual number of bytes stored in a PRZ is smaller than the bytes requested by platform data, since there is a header on each PRZ. Additionally, if ECC is enabled, there are trailing bytes used as well. Normally this mismatch doesn't matter since PRZs are circular buffers and the leading "overflow" bytes are just thrown away. However, in the case of a compressed record, this rather badly corrupts the results. This corruption was visible with "ramoops.mem_size=204800 ramoops.ecc=1". Any stored crashes would not be uncompressable (producing a pstorefs "dmesg-*.enc.z" file), and triggering errors at boot: [ 2.790759] pstore: crypto_comp_decompress failed, ret = -22! Backporting this depends on commit 70ad35db3321 ("pstore: Convert console write to use ->write_buf") Reported-by: Joel Fernandes <joel@joelfernandes.org> Fixes: b0aad7a99c1d ("pstore: Add compression support to pstore") Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
2018-11-29Merge branch 'acpica-fixes'Rafael J. Wysocki1-19/+2
* acpica-fixes: ACPICA: Fix handling of buffer-size in acpi_ex_write_data_to_field()
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 16:02:21 +0000