summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-05-11net: phy: DP83TC811: Introduce support for the DP83TC811 phyDan Murphy3-0/+353
Add support for the DP83811 phy. The DP83811 supports both rgmii and sgmii interfaces. There are 2 part numbers for this the DP83TC811R does not reliably support the SGMII interface but the DP83TC811S will. There is not a way to differentiate these parts from the hardware or register set. So this is controlled via the DT to indicate which phy mode is required. Or the part can be strapped to a certain interface. Data sheet can be found here: http://www.ti.com/product/DP83TC811S-Q1/description http://www.ti.com/product/DP83TC811R-Q1/description Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11cxgb4: avoid schedule while atomicGanesh Goudar1-2/+2
do not sleep while adding or deleting udp tunnel. Fixes: 846eac3fccec ("cxgb4: implement udp tunnel callbacks") Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11cxgb4: enable inner header checksum calculationGanesh Goudar3-22/+83
set cntrl bits to indicate whether inner header checksum needs to be calculated whenever the packet is an encapsulated packet and enable supported encap features. Fixes: d0a1299c6bf7 ("cxgb4: add support for vxlan segmentation offload") Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11cxgb4: Fix {vxlan/geneve}_port initializationArjun Vynipadath2-0/+23
adapter->rawf_cnt was not initialized, thereby ndo_udp_tunnel_{add/del} was returning immediately without initializing {vxlan/geneve}_port. Also initializes mps_encap_entry refcnt. Fixes: 846eac3fccec ("cxgb4: implement udp tunnel callbacks") Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11cxgb4: Add new T5 device idGanesh Goudar1-0/+1
Add 0x50ad device id for new T5 card. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11net: doc: fix spelling mistake: "modrobe.d" -> "modprobe.d"Tonghao Zhang1-1/+1
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11bonding: use the skb_get/set_queue_mappingTonghao Zhang1-4/+4
Use the skb_get_queue_mapping, skb_set_queue_mapping and skb_rx_queue_recorded for skb queue_mapping in bonding driver, but not use it directly. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11bonding: replace the return value typeTonghao Zhang2-8/+12
The method ndo_start_xmit is defined as returning a netdev_tx_t, which is a typedef for an enum type, but the implementation in this driver returns an int. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11erspan: auto detect truncated ipv6 packets.William Tu2-0/+12
Currently the truncated bit is set only when 1) the mirrored packet is larger than mtu and 2) the ipv4 packet tot_len is larger than the actual skb->len. This patch adds another case for detecting whether ipv6 packet is truncated or not, by checking the ipv6 header payload_len and the skb->len. Reported-by: Xiaoyan Jin <xiaoyanj@vmware.com> Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11Merge branch 'mlxsw-spectrum_span-Two-minor-adjustments'David S. Miller1-17/+17
Ido Schimmel says: ==================== mlxsw: spectrum_span: Two minor adjustments Petr says: This patch set fixes a couple of nits in mlxsw's SPAN implementation: two counts of inaccurate variable name and one count of unsuitable error code, fixed, respectively, in patches #1 and #2. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11mlxsw: spectrum_span: Use a more fitting error codePetr Machata1-1/+1
ENOENT is suitable when an item is looked for in a collection and can't be found. The failure here is actually a depletion of a resource, where ENOBUFS is the more fitting error code. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11mlxsw: spectrum_span: Rename misnamed variable l3edevPetr Machata1-16/+16
Calling the variable l3edev was relevant when neighbor lookup was the last stage in the simulated pipeline. Now that mlxsw handles bridges and vlan devices as well, calling it "L3" is a misnomer. Thus in mlxsw_sp_span_dmac(), rename to "dev", because that function is just a service routine where the distinction between tunnel and egress device isn't necessary. In mlxsw_sp_span_entry_tunnel_parms_common(), rename to "edev" to emphasize that the routine traces packet egress. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11udp: avoid refcount_t saturation in __udp_gso_segment()Eric Dumazet1-3/+11
For some reason, Willem thought that the issue we fixed for TCP in commit 7ec318feeed1 ("tcp: gso: avoid refcount_t warning from tcp_gso_segment()") was not relevant for UDP GSO. But syzbot found its way. refcount_t: saturated; leaking memory. WARNING: CPU: 0 PID: 10261 at lib/refcount.c:78 refcount_add_not_zero+0x2d4/0x320 lib/refcount.c:78 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 10261 Comm: syz-executor5 Not tainted 4.17.0-rc3+ #38 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 panic+0x22f/0x4de kernel/panic.c:184 __warn.cold.8+0x163/0x1b3 kernel/panic.c:536 report_bug+0x252/0x2d0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] do_error_trap+0x1de/0x490 arch/x86/kernel/traps.c:296 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:992 RIP: 0010:refcount_add_not_zero+0x2d4/0x320 lib/refcount.c:78 RSP: 0018:ffff880196db6b90 EFLAGS: 00010282 RAX: 0000000000000026 RBX: 00000000ffffff01 RCX: ffffc900040d9000 RDX: 0000000000004a29 RSI: ffffffff8160f6f1 RDI: ffff880196db66f0 RBP: ffff880196db6c78 R08: ffff8801b33d6740 R09: 0000000000000002 R10: ffff8801b33d6740 R11: 0000000000000000 R12: 0000000000000000 R13: 00000000ffffffff R14: ffff880196db6c50 R15: 0000000000020101 refcount_add+0x1b/0x70 lib/refcount.c:102 __udp_gso_segment+0xaa5/0xee0 net/ipv4/udp_offload.c:272 udp4_ufo_fragment+0x592/0x7a0 net/ipv4/udp_offload.c:301 inet_gso_segment+0x639/0x12b0 net/ipv4/af_inet.c:1342 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 __skb_gso_segment+0x3bb/0x870 net/core/dev.c:2865 skb_gso_segment include/linux/netdevice.h:4050 [inline] validate_xmit_skb+0x54d/0xd90 net/core/dev.c:3122 __dev_queue_xmit+0xbf8/0x34c0 net/core/dev.c:3579 dev_queue_xmit+0x17/0x20 net/core/dev.c:3620 neigh_direct_output+0x15/0x20 net/core/neighbour.c:1401 neigh_output include/net/neighbour.h:483 [inline] ip_finish_output2+0xa5f/0x1840 net/ipv4/ip_output.c:229 ip_finish_output+0x828/0xf80 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:277 [inline] ip_output+0x21b/0x850 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:444 [inline] ip_local_out+0xc5/0x1b0 net/ipv4/ip_output.c:124 ip_send_skb+0x40/0xe0 net/ipv4/ip_output.c:1434 udp_send_skb.isra.37+0x5eb/0x1000 net/ipv4/udp.c:825 udp_push_pending_frames+0x5c/0xf0 net/ipv4/udp.c:853 udp_v6_push_pending_frames+0x380/0x3e0 net/ipv6/udp.c:1105 udp_lib_setsockopt+0x59a/0x600 net/ipv4/udp.c:2403 udpv6_setsockopt+0x95/0xa0 net/ipv6/udp.c:1447 sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3046 __sys_setsockopt+0x1bd/0x390 net/socket.c:1903 __do_sys_setsockopt net/socket.c:1914 [inline] __se_sys_setsockopt net/socket.c:1911 [inline] __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: ad405857b174 ("udp: better wmem accounting on gso") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11tcp: switch pacing timer to softirq based hrtimerEric Dumazet3-46/+29
linux-4.16 got support for softirq based hrtimers. TCP can switch its pacing hrtimer to this variant, since this avoids going through a tasklet and some atomic operations. pacing timer logic looks like other (jiffies based) tcp timers. v2: use hrtimer_try_to_cancel() in tcp_clear_xmit_timers() to correctly release reference on socket if needed. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11Merge branch 'dsa-Plug-in-PHYLINK-support'David S. Miller9-207/+458
Florian Fainelli says: ==================== net: dsa: Plug in PHYLINK support This patch series adds PHYLINK support to DSA which is necessary to support more complex PHY and pluggable modules setups. Patch series can be found here: https://github.com/ffainelli/linux/commits/dsa-phylink-v2 This was tested on: - dsa-loop - bcm_sf2 - mv88e6xxx - b53 With a variety of test cases: - internal & external MDIO PHYs - MoCA with link notification through interrupt/MMIO register - built-in PHYs - ifconfig up/down for several cycles works - bind/unbind of the drivers Changes in v2: - fixed link configuration for mv88e6xxx (Andrew) after introducing polling This is technically v2 of what was posted back in March 2018, changes from last time: - fixed probe/remove of drivers - fixed missing gpiod_put() for link GPIOs - fixed polling of link GPIOs (Russell I would need your SoB on the patch you provided offline initially, added some modifications to it) - tested across a wider set of platforms And everything should still work as expected. Please be aware of the following: - switch drivers (like bcm_sf2) which may have user-facing network ports using fixed links would need to implement phylink_mac_ops to remain functional. PHYLINK does not create a phy_device for fixed links, therefore our call to adjust_link() from phylink_mac_link_{up,down} would not be calling into the driver. This *should not* affect CPU/DSA ports which are configured through adjust_link() but have no network devices - support for SFP/SFF is now possible, but switch drivers will still need some modifications to properly support those, including, but not limited to using the correct binding information. This will be submitted on top of this series Please do test on your respective platforms/switches and let me know if you find any issues, hopefully everything still works like before. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11net: dsa: bcm_sf2: Get rid of PHYLIB functionsFlorian Fainelli1-149/+0
Now that we have converted the bcm_sf2 driver to implement PHYLINK MAC operations, we can remove the PHYLIB callbacks: adjust_link() and fixed_link_update() which are no longer called by DSA. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11net: dsa: Plug in PHYLINK supportFlorian Fainelli3-132/+172
Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11net: dsa: mv88e6xxx: add PHYLINK supportRussell King3-0/+125
Add rudimentary phylink support to mv88e6xxx. This allows the driver using user ports with fixed links to keep operating normally. User ports with normal PHYs are not affected since the switch automatically manages their link parameters. User facing ports which use a SFP/SFF with a non-fixed link mode might require a call to phylink_mac_change() to operate properly. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [Andrew: fixed link setting after adding link polling] Signed-off-by: Andrew Lunn <andrew@lunn.ch> [florian: expand commit message] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11net: dsa: Eliminate dsa_slave_get_link()Florian Fainelli1-11/+1
Since we use PHYLIB to manage the per-port link indication, this will also be reflected correctly in the network device's carrier state, so we can use ethtool_op_get_link() instead. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11net: dsa: bcm_sf2: Implement phylink_mac_opsFlorian Fainelli1-8/+206
Make the bcm_sf2 driver implement phylink_mac_ops since it needs to support a wide variety of network interfaces: internal & external MDIO PHYs, fixed PHYs, MoCA with MMIO link status. A large amount of what needs to be done already exists under bcm_sf2_sw_adjust_link() so we are essentially breaking this down into the necessary operation for PHYLINK to work: mac_config, mac_link_up, mac_link_down and validate. We can now entirely get rid of most of what fixed_link_update() provided because only the link information is actually necessary. We still have to force DUPLEX_FULL for legacy Device Tree bindings that did not specify that before. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11net: dsa: Add PHYLINK switch operationsFlorian Fainelli3-1/+30
In preparation for adding support for PHYLINK within DSA, define a number of operations that we will need and that switch drivers can start implementing. Proper integration with PHYLINK will follow in subsequent patches. We start selecting PHYLINK (which implies PHYLIB) in net/dsa/Kconfig such that drivers can be guaranteed that this dependency is properly taken care of and can start referencing PHYLINK helper functions without requiring stubs or anything. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11net: phy: phylink: Poll link GPIOsRussell King1-0/+16
When using a fixed link with a link GPIO, we need to poll that GPIO to determine link state changes. This is consistent with what fixed_phy.c does. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11net: phy: phylink: Release link GPIOFlorian Fainelli1-0/+2
We are not releasing the link GPIO descriptor with gpiod_put() which results in subsequent probing to get -EBUSY when calling fwnode_get_named_gpiod(). Fix this by doing the release in phylink_destroy(). Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11net: phy: phylink: Use gpiod_get_value_cansleep()Florian Fainelli1-1/+1
The GPIO provider for the link GPIO line might require the use of the _cansleep() API, utilize that. This is safe to do since we run in workqueue context. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10rocker: Postpone filtering of !added_by_user FDBPetr Machata1-2/+4
Breaking out of the switch in rocker_switchdev_event() still ends up scheduling work, except an ill-defined one. This leads to an OOPS cited below. Fix by postponing the check until rocker_switchdev_event_work(). [ 23.148476] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 23.148810] PGD 0 P4D 0 [ 23.148982] Oops: 0000 [#1] PREEMPT SMP PTI [ 23.149190] Modules linked in: bridge stp llc iptable_nat nf_nat_ipv4 nf_nat e1000 rocker [ 23.149768] CPU: 0 PID: 239 Comm: kworker/u2:4 Not tainted 4.17.0-rc3-net_next_queue-custom #6 [ 23.150298] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 [ 23.150868] Workqueue: rocker rocker_switchdev_event_work [rocker] [ 23.151258] RIP: 0010:ofdpa_port_fdb+0x7b/0x230 [rocker] [ 23.151597] RSP: 0018:ffffc900004b3e18 EFLAGS: 00010246 [ 23.151952] RAX: 00000000fffbc68c RBX: 0000000000000000 RCX: 0000000000000000 [ 23.152363] RDX: 0000000000000010 RSI: ffff88003b4471e0 RDI: 00000000ffffffff [ 23.152768] RBP: ffff88003b4471c0 R08: ffff88003b4471e0 R09: ffff88003b4471c0 [ 23.153141] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880036caf000 [ 23.153515] R13: 0000000000000000 R14: 0000000000000000 R15: ffff88003bc00000 [ 23.153919] FS: 0000000000000000(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 [ 23.154444] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.154806] CR2: 0000000000000000 CR3: 0000000036eb6000 CR4: 00000000000006f0 [ 23.155194] Call Trace: [ 23.155472] rocker_switchdev_event_work+0x9b/0xd0 [rocker] [ 23.155850] ? __schedule+0x231/0x700 [ 23.156175] process_one_work+0x1cf/0x3e0 [ 23.156490] worker_thread+0x26/0x3d0 [ 23.156795] ? trace_event_raw_event_workqueue_execute_start+0x80/0x80 [ 23.157181] kthread+0x10e/0x130 [ 23.157485] ? kthread_create_worker_on_cpu+0x40/0x40 [ 23.157824] ret_from_fork+0x35/0x40 [ 23.158174] Code: 00 00 c1 e8 02 4c 8d 45 20 bf ff ff ff ff 83 e0 01 4c 89 65 20 88 45 14 48 8b 05 21 da 1f e2 4c 89 c6 4c 89 44 24 10 48 89 45 18 <41> 8b 45 00 89 45 28 41 0f b7 45 04 66 89 45 2c 0f b7 44 24 04 [ 23.159346] RIP: ofdpa_port_fdb+0x7b/0x230 [rocker] RSP: ffffc900004b3e18 [ 23.159742] CR2: 0000000000000000 [ 23.160088] ---[ end trace f9b16d4cb6df0629 ]--- Fixes: 816a3bed9549 ("switchdev: Add fdb.added_by_user to switchdev notifications") Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10tls: Fix tls_device initializationBoris Pismenny1-0/+2
Add sg table initialization to fix a BUG_ON encountered when enabling CONFIG_DEBUG_SG. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10cxgb4: fix the wrong conversion of Mbps to KbpsGanesh Goudar1-3/+3
fix the wrong conversion where 1 Mbps was converted to 1024 Kbps. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10Merge branch 'mlxsw-Support-VLAN-devices-in-mirroring-offloads'David S. Miller3-8/+91
Ido Schimmel says: ==================== mlxsw: Support VLAN devices in mirroring offloads Petr says: When offloading "tc action mirred mirror", there are several scenarios where VLAN devices can show up, that mlxsw can offload on Spectrum machines. I) A direct mirror to a VLAN device on top of a front-panel port device (commonly referred to as "RSPAN") II) VLAN device in egress path of a packet when resolving a mirror to gretap or ip6gretap netdevice. Specifically in the latter case, the following are the cases that can be offloaded: IIa) VLAN device directly above a physical device. IIb) A VLAN-unaware bridge where the egress device is as in IIa. IIc) VLAN device on top of a VLAN-aware bridge where the egress device is a physical device. This patch set implements all the above cases. First, in patch #1, br_vlan_get_info() is extended to allow bridge master argument. Case I is then implemented in patches #2 and #3, case II in patch #4. Note that handling of VLAN protocol is not included. In case I, mirrored packets may end up being double-tagged, and it might be reasonable for the outer tag to be an 802.1ad. However, the protocol type configuration would have to be put on the same VLAN netdevice that represents normal VLAN traffic, and mlxsw currently ignores this setting in that case. Thus this support was left out and the encapsulation always uses 802.1q protocol. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10mlxsw: spectrum_span: Support VLAN under mirror-to-gretapPetr Machata1-8/+19
When mirroring to a gretap or ip6gretap device, allow the underlay packet path to include VLAN devices. The following configurations are supported in underlay: - vlan over phys - vlan-unaware bridge where the egress device is vlan over phys - vlan over vlan-aware bridge where the egress device is phys Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10mlxsw: spectrum_span: Support mirror-to-VLANPetr Machata1-0/+64
Offload "tc action mirred mirror" to a device that is a vlan device on top of a front-panel port device. The hardware encapsulates the mirrored packets in a VLAN tag. That includes the case that the mirrored traffic is already VLAN-tagged--in that case the monitor traffic will be double-tagged, just like in the software path. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10mlxsw: reg: Add MLXSW_REG_MPAT_SPAN_TYPE_REMOTE_ETHPetr Machata1-0/+6
Add MLXSW_REG_MPAT_SPAN_TYPE_REMOTE_ETH to support VLAN-encapsulated port mirroring. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net: bridge: Allow bridge master in br_vlan_get_info()Petr Machata1-0/+2
Mirroring offload in mlxsw needs to check that a given VLAN is allowed to ingress the bridge device. br_vlan_get_info() is the function that is used for this, however currently it only supports bridge port devices. Extend it to support bridge masters as well. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10tcp: Add mark for TIMEWAIT socketsJon Maxwell5-4/+22
This version has some suggestions by Eric Dumazet: - Use a local variable for the mark in IPv6 instead of ctl_sk to avoid SMP races. - Use the more elegant "IP4_REPLY_MARK(net, skb->mark) ?: sk->sk_mark" statement. - Factorize code as sk_fullsock() check is not necessary. Aidan McGurn from Openwave Mobility systems reported the following bug: "Marked routing is broken on customer deployment. Its effects are large increase in Uplink retransmissions caused by the client never receiving the final ACK to their FINACK - this ACK misses the mark and routes out of the incorrect route." Currently marks are added to sk_buffs for replies when the "fwmark_reflect" sysctl is enabled. But not for TW sockets that had sk->sk_mark set via setsockopt(SO_MARK..). Fix this in IPv4/v6 by adding tw->tw_mark for TIME_WAIT sockets. Copy the the original sk->sk_mark in __inet_twsk_hashdance() to the new tw->tw_mark location. Then progate this so that the skb gets sent with the correct mark. Do the same for resets. Give the "fwmark_reflect" sysctl precedence over sk->sk_mark so that netfilter rules are still honored. Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net: ipv4: remove define INET_CSK_DEBUG and unnecessary EXPORT_SYMBOLJoe Perches2-23/+4
INET_CSK_DEBUG is always set and only is used for 2 pr_debug calls. EXPORT_SYMBOL(inet_csk_timer_bug_msg) is only used by these 2 pr_debug calls and is also unnecessary as the exported string can be used directly by these calls. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10liquidio: bump up driver version to 1.7.2 to match newer NIC firmwareFelix Manlunas1-1/+1
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10liquidio: monitor all of Octeon's cores in watchdog threadFelix Manlunas1-1/+1
The liquidio_watchdog kernel thread is watching over only 12 cores of the Octeon CN23XX; it's neglecting the other 4 cores that are present in the CN2360. Fix it by defining LIO_MAX_CORES as 16. Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10Merge branch '100GbE' of ↵David S. Miller2-67/+111
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2018-05-09 This series contains updates to fm10k only. Jake provides all the changes in the series, starting with adding support for accelerated MACVLAN devices. Reduced code duplication by implementing a macro to be used when setting up the type specific macros. Avoided potential bugs with stats by using a macro to calculate the array size when passing to ensure that the size is correct. v2: changed macro reference '#' with __stringify() as suggested by Joe Perches to patch 2 of the series. Also made sure the updated series of patches is actually pushed to my kernel.org tree ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net/ipv6: fix lock imbalance in ip6_route_del()Eric Dumazet1-1/+3
WARNING: lock held when returning to user space! 4.17.0-rc3+ #37 Not tainted syz-executor1/27662 is leaving the kernel with locks still held! 1 lock held by syz-executor1/27662: #0: 00000000f661aee7 (rcu_read_lock){....}, at: ip6_route_del+0xea/0x13f0 net/ipv6/route.c:3206 BUG: scheduling while atomic: syz-executor1/27662/0x00000002 INFO: lockdep is turned off. Modules linked in: Kernel panic - not syncing: scheduling while atomic CPU: 1 PID: 27662 Comm: syz-executor1 Not tainted 4.17.0-rc3+ #37 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 panic+0x22f/0x4de kernel/panic.c:184 __schedule_bug.cold.85+0xdf/0xdf kernel/sched/core.c:3290 schedule_debug kernel/sched/core.c:3307 [inline] __schedule+0x139e/0x1e30 kernel/sched/core.c:3412 schedule+0xef/0x430 kernel/sched/core.c:3549 exit_to_usermode_loop+0x220/0x310 arch/x86/entry/common.c:152 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline] syscall_return_slowpath arch/x86/entry/common.c:265 [inline] do_syscall_64+0x6ac/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x455979 RSP: 002b:00007fbf4051dc68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: 0000000000000000 RBX: 00007fbf4051e6d4 RCX: 0000000000455979 RDX: 00000000200001c0 RSI: 000000000000890c RDI: 0000000000000013 RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000003c8 R14: 00000000006f9b60 R15: 0000000000000000 Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: 23fb93a4d3f1 ("net/ipv6: Cleanup exception and cache route handling") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Ahern <dsahern@gmail.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10Merge branch 'hns3-misc-fixes'David S. Miller4-151/+76
Salil Mehta says: ==================== Misc bug fixes for HNS3 Ethernet Driver Fixes to some of the bugs found during system test, internal review and clean-up ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net: hns3: refactor the loopback related functionYunsheng Lin2-47/+42
This patch refactors the loopback related function in order to support the serdes loopback. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net: hns3: fix for cleaning ring problemYunsheng Lin1-4/+30
The head or tail in hardware is not longer valid when resetting, current hns3_clear_all_ring use them to clean the ring, which will cause problem during resetting. This patch fixes it by using next_to_use and next_to_clean in the ring struct. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net: hns3: remove add/del_tunnel_udp in hns3_enet moduleYunsheng Lin2-96/+0
The add/del_tunnel_udp is not implemented in hclge_main moulde, the NETIF_F_RX_UDP_TUNNEL_PORT feature bit is added automatically by stack when ndo_udp_tunnel_add is not null in dev->netdev_ops. This patch removes the add/del_tunnel_udp related function, for we do not support this feature now. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net: hns3: Fix for setting mac address when resettingYunsheng Lin1-4/+4
When hns3_init_mac_addr is called during reset process, it will get the mac address from NCL_CONFIG and set it to hardware. If user has changed the mac address, then the mac address set by user is lost during resetting. This patch fixes it by not getting the mac address from NCL_CONFIG when resetting. Fixes: 424eb834a9be ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10hv_netvsc: typo in NDIS RSS parameters structureStephen Hemminger2-3/+3
Fix simple misspelling kashkey_offset should be hashkey_offset. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10drivers: net: davinci_mdio: prevent spurious timeoutSekhar Nori1-7/+8
A well timed kernel preemption in the time_after() loop in wait_for_idle() can result in a spurious timeout error to be returned. Fix it by using readl_poll_timeout() which takes care of this issue. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10Merge branch 'dsa-mv88e6xxx-cleanup-Global-Control-2-register'David S. Miller4-10/+122
Vivien Didelot says: ==================== net: dsa: mv88e6xxx: cleanup Global Control 2 register The mv88e6xxx driver still writes arbitrary values in the Global 1 Control 2 register at setup, which layout differs a lot between chips. This results in an inconsistent configuration, for example with the Remote Management Unit (RMU). The first patch adds an operation for the Cascade Port bits, the second patch sets the device number in the device mapping function and the third patch adds an operation to correctly disable the RMU. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net: dsa: mv88e6xxx: add RMU disable opVivien Didelot4-0/+65
The RMU mode bits moved a lot within the Global Control 2 register of the Marvell switch families. Add an .rmu_disable op to support at least 3 known alternatives. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net: dsa: mv88e6xxx: set device numberVivien Didelot3-7/+14
All Marvell switches supported by mv88e6xxx have to set their device number in the Global Control 2 register. Extract this in a read then write function, called from the device mapping setup code. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net: dsa: mv88e6xxx: add a cascade port opVivien Didelot4-3/+43
Only the 88E6185 family has bits 15:12 Cascade Port bits in the Global Control 2 register. Hence inconsistent values are actually written in this register for other families. Add a .set_cascade_port operation to isolate the 88E6185 case, and call it from the device mapping setup function. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10Merge branch 'mlx4-misc-next'David S. Miller4-2/+69
Tariq Toukan says: ==================== mlx4_core misc for 4.18 This patchset contains misc enhancements from the team to the mlx4 Core driver. Patch 1 by Eran adds driver version report in FW. Patch 2 by Yishai implements suspend/resume PCI callbacks. Patch 3 extends the range of an existing module param from boolean to numerical. Series generated against net-next commit: 53a7bdfb2a27 dt-bindings: dsa: Remove unnecessary #address/#size-cells ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 14:59:04 +0000