summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-05-29Merge branch 'hns3-next'David S. Miller10-207/+283
Salil Mehta says: ==================== Misc. bug fixes & some minor additions to HNS3 driver This patch-set provides some bug fixes figured out during testing and review. It also provides some additions due to running of the existing code on the new revision of the HNS3 hardware. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: hns3: Fixes initalization of RoCE handle and makes it conditionalLijun Ou1-3/+5
When register a RoCE client with hnae3vf device, it needs to judge the device whether support RoCE vf function. Otherwise, it will lead to calltrace when RoCE is not support vf function and remove roce device. The calltrace as follows: [ 93.156614] Unable to handle kernel NULL pointer dereference at virtual address 00000015 <SNIP> [ 93.278784] Call trace: [ 93.278788] hnae3_match_n_instantiate+0x24/0xd8 [hnae3] [ 93.278790] hnae3_register_client+0xcc/0x150 [hnae3] [ 93.278801] hns_roce_hw_v2_init+0x18/0x1000 [hns_roce_hw_v2] [ 93.278805] do_one_initcall+0x58/0x160 [ 93.278807] do_init_module+0x64/0x1d8 [ 93.278809] load_module+0x135c/0x15c8 [ 93.278811] SyS_finit_module+0x100/0x118 [ 93.278816] __sys_trace_return+0x0/0x4 [ 93.278827] Code: aa0003f5 12001c56 aa1e03e0 d503201f (b9402660) Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Reported-by: Xinwei Kong <kong.kongxinwei@hisilicon.com> Reported-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: hns3: Adds support for led locate command for copper portJian Shen2-41/+6
Firmware now supports control of all leds. Existing HNS3 driver code only supported led locate command over SFP Fibre ports. But now it is also supported over copper port. This patch removes existing not needed code for the led locate command and updates the led control command between driver and firmware. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: hns3: Remove unused led control codeJian Shen3-112/+0
In the previous implementation of led control for fibre port , parses the port speed configuration, checks the link status and traffic status per second, and updates the blink status of link led, traffic led and speed led. Now, the firmware takes responsibility to handle the led, the dirver just needs to deal with locate command. So the codes for link led, traffic led and speed led are useless now. This patch removes these redundant codes. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: hns3: Clear TX/RX rings when stopping port & un-initializing clientFuyun Liang3-10/+110
When we down the port, some packets are left in TX/RX buffer. When we up the port again, these old packets are forwarded to protocol stack or are sent to internet. It will make some problem. TX/RX buffer should be cleared when stopping port. This patch adds some function to ensure the buffer is clean when port is started. We should clear the rings when clients are being un-initialized as well. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: hns3: Removes unnecessary check when clearing TX/RX ringsFuyun Liang1-6/+0
Our code will ensure that hns3_clear_tx_ring is not used to cleared RX rings and hns3_clear_rx_ring is not used to cleared TX rings. So the ring type check is unnecessary. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: hns3: Fixes the init of the VALID BD info in the descriptorFuyun Liang1-0/+2
RX Buffer Descriptor contains a VALID bit which indicates if the BD is valid and has some data. This field is set by HNS3 hardware to intimate the driver of some valid data present in the BD. nd should be reset by the driver when BD is being used again. In the existing code this bit was not being (re-)initialized properly and hence was causing problems. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: hns3: Fixes the state to indicate client-type initializationPeng Li2-4/+49
HNAE3 module supports kernel nic driver, user nic driver and roce driver, and there are 3 client types. Driver uses one bit(HNAE3_CLIENT_INITED_B) to indicate the client initialization state, it will cause confusion for 3 client types. This patch fixes it by use 3 bits to indicate the initialization state. Fixes: 38caee9d3ee8 ("net: hns3: Add support of the HNAE3 framework") Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: hns3: Fix for PF mailbox receving unknown messageXi Wang1-3/+20
Before the firmware updates the crq's tail pointer, if the PF driver reads the data in the crq, the data may be incomplete at this time, which will lead to the driver read an unknown message. This patch fixes it by checking if crq is not empty before reading the message. Fixes: c1a81619d73a ("net: hns3: Add mailbox interrupt handling to PF driver") Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: hns3: Add support to enable TX/RX promisc mode for H/W rev(0x21)Peng Li2-1/+10
HCLGE_PROMISC_TX_EN_B and HCLGE_PROMISC_RX_EN_B are not supported on pdev revision(0x20), new revision(0x21) supports them. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: hns3: Add STRP_TAGP field support for hardware revision 0x21Peng Li2-5/+40
Hardware Revision(0x21) Buffer Descriptor adds a field STRP_TAGP for vlan stripped processed indication. STRP_TAGP field has 2 bits, bit 0 is stripped indication of the vlan tag in outer vlan tag field, bit 1 is stripped indication of the vlan tag in inner vlan tag field. For each bit, 0 indicates the tag is not stripped and 1 indicates the tag is stripped. This patch adds STRP_TAGP support for revision(0x21), and does not change the revision(0x20) action. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: hns3: Add support for tx_accept_tag2 and tx_accept_untag2 configPeng Li3-10/+29
HNS3 Hardware can support up to two VLAN tags in transmit leg, the PPP module can handle the packets based on the tag1 and tag2 config. This patch adds support for tag2 config for vlan handling Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: hns3: Updates RX packet info fetch in case of multi BDPeng Li1-18/+18
In the latest revision of the hardware, if a packet is spanning across multiple BDs then only VLD bit and current data size info is valid in each BD, and rest of the information is only valid in the last BD of the packet. In such case we should make sure we are fetching RX packet size from the first descriptor and information like VLAN should be fetched from last BD. Signed-off-by: Peng Li <lipeng321@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28net: sched: shrink struct QdiscPaolo Abeni1-2/+2
The struct Qdisc has a lot of holes, especially after commit a53851e2c321 ("net: sched: explicit locking in gso_cpu fallback"), which as a side effect, moved the fields just after 'busylock' on a new cacheline. Since both 'padded' and 'refcnt' are not updated frequently, and there is a hole before 'gso_skb', we can move such fields there, saving a cacheline without any performance side effect. Before this commit: pahole -C Qdisc net/sche/sch_generic.o # ... /* size: 384, cachelines: 6, members: 25 */ /* sum members: 236, holes: 3, sum holes: 92 */ /* padding: 56 */ After this commit: pahole -C Qdisc net/sche/sch_generic.o # ... /* size: 320, cachelines: 5, members: 25 */ /* sum members: 236, holes: 2, sum holes: 28 */ /* padding: 56 */ Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28qmi_wwan: apply SET_DTR quirk to the SIMCOM shared device IDBjørn Mork1-1/+1
SIMCOM are reusing a single device ID for many (all of their?) different modems, based on different chipsets and firmwares. Newer Qualcomm chipset generations require setting DTR to wake the QMI function. The SIM7600E modem is using such a chipset, making it fail to work with this driver despite the device ID match. Fix by unconditionally enabling the SET_DTR quirk for all SIMCOM modems using this specific device ID. This is similar to what we already have done for another case of device IDs recycled over multiple chipset generations: 14cf4a771b30 ("drivers: net: usb: qmi_wwan: add QMI_QUIRK_SET_DTR for Telit PID 0x1201") Initial testing on an older SIM7100 modem shows no immediate side effects. Reported-by: Sebastian Sjoholm <sebastian.sjoholm@gmail.com> Cc: Reinhard Speyerer <rspmn@arcor.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28Merge branch 'stmmac-add-support-for-stm32mp1'David S. Miller5-18/+284
Christophe Roullier says: ==================== net: ethernet: stmmac: add support for stm32mp1 Patches to have Ethernet support on stm32mp1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28dt-bindings: stm32: add compatible for sysconChristophe Roullier2-0/+14
This patch describes syscon DT bindings. Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28net: stmmac: add dwmac-4.20a compatibleChristophe Roullier1-1/+2
Manage dwmac-4.20a version from synopsys Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28dt-bindings: stm32-dwmac: add support of MPU familiesChristophe Roullier1-2/+16
Add description for Ethernet MPU families fields Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28net: ethernet: stmmac: add adaptation for stm32mp157c.Christophe Roullier1-15/+252
Glue codes to support stm32mp157c device and stay compatible with stm32 mcu familly Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28dt-bindings: ptp: add ptp-qoriq.txtYangbo Lu2-67/+70
This patch is to add a documentation for ptp_qoriq dt-bindings. The description for ptp_qoriq dt-bindings was actually moved from Documentation/devicetree/bindings/net/fsl-tsec-phy.txt, since gianfar_ptp driver was moved to ptp_qoriq driver. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28net: ethernet: gianfar_ethtool: get phc index through drvdataYangbo Lu2-8/+18
Global variable gfar_phc_index was used to get and store phc index through gianfar_ptp driver. However gianfar_ptp had been renamed as ptp_qoriq for QorIQ common PTP driver. This gfar_phc_index doesn't work any more, and the phc index is stored in drvdata now. This patch is to support getting phc index through ptp_qoriq drvdata. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28ptp_qoriq: move some definitions to header fileYangbo Lu2-131/+142
This patch is to move some definitions in ptp_qoriq.c to the header file. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28ptp: rework gianfar_ptp as QorIQ common PTP driverYangbo Lu4-162/+174
gianfar_ptp was the PTP clock driver for 1588 timer module of Freescale QorIQ eTSEC (Enhanced Three-Speed Ethernet Controllers) platforms. Actually QorIQ DPAA (Data Path Acceleration Architecture) platforms is also using the same 1588 timer module in hardware. This patch is to rework gianfar_ptp as QorIQ common PTP driver to support both DPAA and eTSEC. Moved gianfar_ptp.c to drivers/ptp/, renamed it as ptp_qoriq.c, and renamed many variables. There were not any function changes. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28ifb: fix packets checksumJon Maxwell1-1/+1
Fixup the checksum for CHECKSUM_COMPLETE when pulling skbs on RX path. Otherwise we get splats when tc mirred is used to redirect packets to ifb. Before fix: nic: hw csum failure Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28net: phy: realtek: add suspend/resume callbacks for RTL8211BHeiner Kallweit1-0/+16
Add RTL8211B suspend / resume callbacks. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28Merge branch 'Enable-virtio_net-to-act-as-a-standby-for-a-passthru-device'David S. Miller17-167/+1522
Sridhar Samudrala says: ==================== Enable virtio_net to act as a standby for a passthru device The main motivation for this patch is to enable cloud service providers to provide an accelerated datapath to virtio-net enabled VMs in a transparent manner with no/minimal guest userspace changes. This also enables hypervisor controlled live migration to be supported with VMs that have direct attached SR-IOV VF devices. Patch 1 introduces a failover module that provides a generic interface for paravirtual drivers to listen for netdev register/unregister/link change events from pci ethernet devices with the same MAC and takeover their datapath. The notifier and event handling code is based on the existing netvsc implementation. Patch 2 refactors netvsc to use the registration/notification framework introduced by failover module. Patch 3 introduces a net_failover driver that provides an automated failover mechanism to paravirtual drivers via APIs to create and destroy a failover master netdev and mananges a primary and standby slave netdevs that get registered via the generic failover infrastructure. Patch 4 introduces a new feature bit VIRTIO_NET_F_STANDBY to virtio-net that can be used by hypervisor to indicate that virtio_net interface should act as a standby for another device with the same MAC address. Patch 5 extends virtio_net to use alternate datapath when available and registered. When STANDBY feature is enabled, virtio_net driver uese the net_failover API to create an additional 'failover' netdev that acts as a master device and controls 2 slave devices. The original virtio_net netdev is registered as 'standby' netdev and a passthru/vf device with the same MAC gets registered as 'primary' netdev. Both 'standby' and 'failover' netdevs are associated with the same 'pci' device. The user accesses the network interface via 'failover' netdev. The 'failover' netdev chooses 'primary' netdev as default for transmits when it is available with link up and running. As this patch series is initially focusing on usecases where hypervisor fully controls the VM networking and the guest is not expected to directly configure any hardware settings, it doesn't expose all the ndo/ethtool ops that are supported by virtio_net at this time. To support additional usecases, it should be possible to enable additional ops later by caching the state in failover netdev and replaying when the 'primary' netdev gets registered. At the time of live migration, the hypervisor needs to unplug the VF device from the guest on the source host and reset the MAC filter of the VF to initiate failover of datapath to virtio before starting the migration. After the migration is completed, the destination hypervisor sets the MAC filter on the VF and plugs it back to the guest to switch over to VF datapath. This patch is based on the discussion initiated by Jesse on this thread. https://marc.info/?l=linux-virtualization&m=151189725224231&w=2 v12: - Tested live migration with virtio-net/AVF(i40evf) configured in failover mode while running iperf in background. Tried static ip and dhcp configurations using 'network' scripts and Network Manager. - Build tested netvsc module. Updates: - Extended generic failover module to do common functions like setting FAILOVER_SLAVE flag, registering rx-handler and linking to upper dev in the generic register/unregister handlers. This required adding 3 additional failover ops pre_register, pre_unregister and handle_frame. netvsc and net_failover drivers are updated to support these ops. v11: - Split net_failover module into 2 components. 1. 'failover' module that provides generic failover infrastructure to register a failover instance and listen for slave events. 2. 'net_failover' driver that provides APIs to create/destroy upper netdev and supports 3-netdev model used by virtio-net. - Added documentation v10: - fix net_failover_open() to update failover CARRIER correctly based on standby and primary states. - fix net_failover_handle_frame() to handle frames received on standby when primary is present. - replace netdev_upper_dev_link with netdev_master_upper_dev_link and handle lower dev state changes. - fix net_failver_create() and net_failover_register() interfaces to use ERR_PTR and avoid arg ** - disable setting mac address when virtio-net in STANDBY mode - document exported symbols - added entry to MAINTAINERS file v9: Select NET_FAILOVER automatically when VIRTIO_NET/HYPERV_NET are enabled. (stephen) v8: - Made the failover managment routines more robust by updating the feature bits/other fields in the failover netdev when slave netdevs are registered/unregistered. (mst) - added support for handling vlans. - Limited the changes in netvsc to only use the notifier/event/lookups from the failover module. The slave register/unregister/link-change handlers are only updated to use the getbymac routine to get the upper netdev. There is no change in their functionality. (stephen) - renamed structs/function/file names to use net_failover prefix. (mst) v7 - Rename 'bypass/active/backup' terminology with 'failover/primary/standy' (jiri, mst) - re-arranged dev_open() and dev_set_mtu() calls in the register routines so that they don't get called for 2-netdev model. (stephen) - fixed select_queue() routine to do queue selection based on VF if it is registered as primary. (stephen) - minor bugfixes v6 RFC: Simplified virtio_net changes by moving all the ndo_ops of the bypass_netdev and create/destroy of bypass_netdev to 'bypass' module. avoided 2 phase registration(driver + instances). introduced IFF_BYPASS/IFF_BYPASS_SLAVE dev->priv_flags replaced mutex with a spinlock v5 RFC: Based on Jiri's comments, moved the common functionality to a 'bypass' module so that the same notifier and event handlers to handle child register/unregister/link change events can be shared between virtio_net and netvsc. Improved error handling based on Siwei's comments. v4: - Based on the review comments on the v3 version of the RFC patch and Jakub's suggestion for the naming issue with 3 netdev solution, proposed 3 netdev in-driver bonding solution for virtio-net. v3 RFC: - Introduced 3 netdev model and pointed out a couple of issues with that model and proposed 2 netdev model to avoid these issues. - Removed broadcast/multicast optimization and only use virtio as backup path when VF is unplugged. v2 RFC: - Changed VIRTIO_NET_F_MASTER to VIRTIO_NET_F_BACKUP (mst) - made a small change to the virtio-net xmit path to only use VF datapath for unicasts. Broadcasts/multicasts use virtio datapath. This avoids east-west broadcasts to go over the PCI link. - added suppport for the feature bit in qemu ==================== Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28virtio_net: Extend virtio to use VF datapath when availableSridhar Samudrala3-1/+128
This patch enables virtio_net to switch over to a VF datapath when STANDBY feature is enabled and a VF netdev is present with the same MAC address. It allows live migration of a VM with a direct attached VF without the need to setup a bond/team between a VF and virtio net device in the guest. It uses the API that is exported by the net_failover driver to create and and destroy a master failover netdev. When STANDBY feature is enabled, an additional netdev(failover netdev) is created that acts as a master device and tracks the state of the 2 lower netdevs. The original virtio_net netdev is marked as 'standby' netdev and a passthru device with the same MAC is registered as 'primary' netdev. The hypervisor needs to unplug the VF device from the guest on the source host and reset the MAC filter of the VF to initiate failover of datapath to virtio before starting the migration. After the migration is completed, the destination hypervisor sets the MAC filter on the VF and plugs it back to the guest to switch over to VF datapath. This patch is based on the discussion initiated by Jesse on this thread. https://marc.info/?l=linux-virtualization&m=151189725224231&w=2 Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28virtio_net: Introduce VIRTIO_NET_F_STANDBY feature bitSridhar Samudrala2-1/+4
This feature bit can be used by hypervisor to indicate virtio_net device to act as a standby for another device with the same MAC address. VIRTIO_NET_F_STANDBY is defined as bit 62 as it is a device feature bit. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28net: Introduce net_failover driverSridhar Samudrala6-0/+923
The net_failover driver provides an automated failover mechanism via APIs to create and destroy a failover master netdev and manages a primary and standby slave netdevs that get registered via the generic failover infrastructure. The failover netdev acts a master device and controls 2 slave devices. The original paravirtual interface gets registered as 'standby' slave netdev and a passthru/vf device with the same MAC gets registered as 'primary' slave netdev. Both 'standby' and 'failover' netdevs are associated with the same 'pci' device. The user accesses the network interface via 'failover' netdev. The 'failover' netdev chooses 'primary' netdev as default for transmits when it is available with link up and running. This can be used by paravirtual drivers to enable an alternate low latency datapath. It also enables hypervisor controlled live migration of a VM with direct attached VF by failing over to the paravirtual datapath when the VF is unplugged. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28netvsc: refactor notifier/event handling code to use the failover frameworkSridhar Samudrala3-165/+60
Use the registration/notification framework supported by the generic failover infrastructure. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28net: Introduce generic failover moduleSridhar Samudrala7-0/+407
The failover module provides a generic interface for paravirtual drivers to register a netdev and a set of ops with a failover instance. The ops are used as event handlers that get called to handle netdev register/ unregister/link change/name change events on slave pci ethernet devices with the same mac address as the failover netdev. This enables paravirtual drivers to use a VF as an accelerated low latency datapath. It also allows migration of VMs with direct attached VFs by failing over to the paravirtual datapath when the VF is unplugged. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28vrf: add CRC32c offload to device featuresDavide Caratti1-1/+1
SCTP sockets originated in a VRF can improve their performance if CRC32c computation is delegated to underlying devices: update device features, setting NETIF_F_SCTP_CRC. Iterating the following command in the topology proposed with [1], # ip vrf exec vrf-h2 netperf -H 192.0.2.1 -t SCTP_STREAM -- -m 10K the measured throughput in Mbit/s improved from 2395 ± 1% to 2720 ± 1%. [1] https://www.spinics.net/lists/netdev/msg486007.html Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28net: stmmac: Use mutex instead of spinlockThierry Reding3-24/+21
Some drivers, such as DWC EQOS on Tegra, need to perform operations that can sleep under this lock (clk_set_rate() in tegra_eqos_fix_speed()) for proper operation. Since there is no need for this lock to be a spinlock, convert it to a mutex instead. Fixes: e6ea2d16fc61 ("net: stmmac: dwc-qos: Add Tegra186 support") Reported-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Tested-by: Bhadram Varka <vbhadram@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28bnx2x: Collect the device debug information during Tx timeout.Sudarsana Reddy Kalluru1-1/+6
Tx-timeout mostly happens due to some issue in the device. In such cases, debug dump would be helpful for identifying the cause of the issue. This patch adds support to spill debug data during the Tx timeout. Here bnx2x_panic_dump() API is used instead of bnx2x_panic(), since we still want to allow the Tx-timeout recovery a chance to succeed. Changes from previous version: ------------------------------- v2: Fixed a coding error. Please consider applying this to "net-next". Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller200-874/+2625
Lots of easy overlapping changes in the confict resolutions here. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25Merge branch 'akpm' (patches from Andrew)Linus Torvalds16-43/+125
Merge misc fixes from Andrew Morton: "16 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: kasan: fix memory hotplug during boot kasan: free allocated shadow memory on MEM_CANCEL_ONLINE checkpatch: fix macro argument precedence test init/main.c: include <linux/mem_encrypt.h> kernel/sys.c: fix potential Spectre v1 issue mm/memory_hotplug: fix leftover use of struct page during hotplug proc: fix smaps and meminfo alignment mm: do not warn on offline nodes unless the specific node is explicitly requested mm, memory_hotplug: make has_unmovable_pages more robust mm/kasan: don't vfree() nonexistent vm_area MAINTAINERS: change hugetlbfs maintainer and update files ipc/shm: fix shmat() nil address after round-down when remapping Revert "ipc/shm: Fix shmat mmap nil-page protection" idr: fix invalid ptr dereference on item delete ocfs2: revert "ocfs2/o2hb: check len for bio_add_page() to avoid getting incorrect bio" mm: fix nr_rotate_swap leak in swapon() error case
2018-05-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds49-193/+372
Pull networking fixes from David Miller: "Let's begin the holiday weekend with some networking fixes: 1) Whoops need to restrict cfg80211 wiphy names even more to 64 bytes. From Eric Biggers. 2) Fix flags being ignored when using kernel_connect() with SCTP, from Xin Long. 3) Use after free in DCCP, from Alexey Kodanev. 4) Need to check rhltable_init() return value in ipmr code, from Eric Dumazet. 5) XDP handling fixes in virtio_net from Jason Wang. 6) Missing RTA_TABLE in rtm_ipv4_policy[], from Roopa Prabhu. 7) Need to use IRQ disabling spinlocks in mlx4_qp_lookup(), from Jack Morgenstein. 8) Prevent out-of-bounds speculation using indexes in BPF, from Daniel Borkmann. 9) Fix regression added by AF_PACKET link layer cure, from Willem de Bruijn. 10) Correct ENIC dma mask, from Govindarajulu Varadarajan. 11) Missing config options for PMTU tests, from Stefano Brivio" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (48 commits) ibmvnic: Fix partial success login retries selftests/net: Add missing config options for PMTU tests mlx4_core: allocate ICM memory in page size chunks enic: set DMA mask to 47 bit ppp: remove the PPPIOCDETACH ioctl ipv4: remove warning in ip_recv_error net : sched: cls_api: deal with egdev path only if needed vhost: synchronize IOTLB message with dev cleanup packet: fix reserve calculation net/mlx5: IPSec, Fix a race between concurrent sandbox QP commands net/mlx5e: When RXFCS is set, add FCS data into checksum calculation bpf: properly enforce index mask to prevent out-of-bounds speculation net/mlx4: Fix irq-unsafe spinlock usage net: phy: broadcom: Fix bcm_write_exp() net: phy: broadcom: Fix auxiliary control register reads net: ipv4: add missing RTA_TABLE to rtm_ipv4_policy net/mlx4: fix spelling mistake: "Inrerface" -> "Interface" and rephrase message ibmvnic: Only do H_EOI for mobility events tuntap: correctly set SOCKWQ_ASYNC_NOSPACE virtio-net: fix leaking page for gso packet during mergeable XDP ...
2018-05-25kasan: fix memory hotplug during bootDavid Hildenbrand1-1/+1
Using module_init() is wrong. E.g. ACPI adds and onlines memory before our memory notifier gets registered. This makes sure that ACPI memory detected during boot up will not result in a kernel crash. Easily reproducible with QEMU, just specify a DIMM when starting up. Link: http://lkml.kernel.org/r/20180522100756.18478-3-david@redhat.com Fixes: 786a8959912e ("kasan: disable memory hotplug") Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-25kasan: free allocated shadow memory on MEM_CANCEL_ONLINEDavid Hildenbrand1-0/+1
We have to free memory again when we cancel onlining, otherwise a later onlining attempt will fail. Link: http://lkml.kernel.org/r/20180522100756.18478-2-david@redhat.com Fixes: fa69b5989bb0 ("mm/kasan: add support for memory hotplug") Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-25checkpatch: fix macro argument precedence testJoe Perches1-1/+1
checkpatch's macro argument precedence test is broken so fix it. Link: http://lkml.kernel.org/r/5dd900e9197febc1995604bb33c23c136d8b33ce.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-25init/main.c: include <linux/mem_encrypt.h>Mathieu Malaterre1-0/+1
In commit c7753208a94c ("x86, swiotlb: Add memory encryption support") a call to function `mem_encrypt_init' was added. Include prototype defined in header <linux/mem_encrypt.h> to prevent a warning reported during compilation with W=1: init/main.c:494:20: warning: no previous prototype for `mem_encrypt_init' [-Wmissing-prototypes] Link: http://lkml.kernel.org/r/20180522195533.31415-1-malat@debian.org Signed-off-by: Mathieu Malaterre <malat@debian.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Gargi Sharma <gs051095@gmail.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-25kernel/sys.c: fix potential Spectre v1 issueGustavo A. R. Silva1-0/+5
`resource' can be controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: kernel/sys.c:1474 __do_compat_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap) kernel/sys.c:1455 __do_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap) Fix this by sanitizing *resource* before using it to index current->signal->rlim Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Link: http://lkml.kernel.org/r/20180515030038.GA11822@embeddedor.com Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-25mm/memory_hotplug: fix leftover use of struct page during hotplugJonathan Cameron3-6/+9
The case of a new numa node got missed in avoiding using the node info from page_struct during hotplug. In this path we have a call to register_mem_sect_under_node (which allows us to specify it is hotplug so don't change the node), via link_mem_sections which unfortunately does not. Fix is to pass check_nid through link_mem_sections as well and disable it in the new numa node path. Note the bug only 'sometimes' manifests depending on what happens to be in the struct page structures - there are lots of them and it only needs to match one of them. The result of the bug is that (with a new memory only node) we never successfully call register_mem_sect_under_node so don't get the memory associated with the node in sysfs and meminfo for the node doesn't report it. It came up whilst testing some arm64 hotplug patches, but appears to be universal. Whilst I'm triggering it by removing then reinserting memory to a node with no other elements (thus making the node disappear then appear again), it appears it would happen on hotplugging memory where there was none before and it doesn't seem to be related the arm64 patches. These patches call __add_pages (where most of the issue was fixed by Pavel's patch). If there is a node at the time of the __add_pages call then all is well as it calls register_mem_sect_under_node from there with check_nid set to false. Without a node that function returns having not done the sysfs related stuff as there is no node to use. This is expected but it is the resulting path that fails... Exact path to the problem is as follows: mm/memory_hotplug.c: add_memory_resource() The node is not online so we enter the 'if (new_node)' twice, on the second such block there is a call to link_mem_sections which calls into drivers/node.c: link_mem_sections() which calls drivers/node.c: register_mem_sect_under_node() which calls get_nid_for_pfn and keeps trying until the output of that matches the expected node (passed all the way down from add_memory_resource) It is effectively the same fix as the one referred to in the fixes tag just in the code path for a new node where the comments point out we have to rerun the link creation because it will have failed in register_new_memory (as there was no node at the time). (actually that comment is wrong now as we don't have register_new_memory any more it got renamed to hotplug_memory_register in Pavel's patch). Link: http://lkml.kernel.org/r/20180504085311.1240-1-Jonathan.Cameron@huawei.com Fixes: fc44f7f9231a ("mm/memory_hotplug: don't read nid from struct page during hotplug") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-25proc: fix smaps and meminfo alignmentHugh Dickins1-5/+0
The 4.17-rc /proc/meminfo and /proc/<pid>/smaps look ugly: single-digit numbers (commonly 0) are misaligned. Remove seq_put_decimal_ull_width()'s leftover optimization for single digits: it's wrong now that num_to_str() takes care of the width. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1805241554210.1326@eggly.anvils Fixes: d1be35cb6f96 ("proc: add seq_put_decimal_ull_width to speed up /proc/pid/smaps") Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Andrei Vagin <avagin@openvz.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-25mm: do not warn on offline nodes unless the specific node is explicitly ↵Michal Hocko1-1/+1
requested Oscar has noticed that we splat WARNING: CPU: 0 PID: 64 at ./include/linux/gfp.h:467 vmemmap_alloc_block+0x4e/0xc9 [...] CPU: 0 PID: 64 Comm: kworker/u4:1 Tainted: G W E 4.17.0-rc5-next-20180517-1-default+ #66 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Workqueue: kacpi_hotplug acpi_hotplug_work_fn Call Trace: vmemmap_populate+0xf2/0x2ae sparse_mem_map_populate+0x28/0x35 sparse_add_one_section+0x4c/0x187 __add_pages+0xe7/0x1a0 add_pages+0x16/0x70 add_memory_resource+0xa3/0x1d0 add_memory+0xe4/0x110 acpi_memory_device_add+0x134/0x2e0 acpi_bus_attach+0xd9/0x190 acpi_bus_scan+0x37/0x70 acpi_device_hotplug+0x389/0x4e0 acpi_hotplug_work_fn+0x1a/0x30 process_one_work+0x146/0x340 worker_thread+0x47/0x3e0 kthread+0xf5/0x130 ret_from_fork+0x35/0x40 when adding memory to a node that is currently offline. The VM_WARN_ON is just too loud without a good reason. In this particular case we are doing alloc_pages_node(node, GFP_KERNEL|__GFP_RETRY_MAYFAIL|__GFP_NOWARN, order) so we do not insist on allocating from the given node (it is more a hint) so we can fall back to any other populated node and moreover we explicitly ask to not warn for the allocation failure. Soften the warning only to cases when somebody asks for the given node explicitly by __GFP_THISNODE. Link: http://lkml.kernel.org/r/20180523125555.30039-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Oscar Salvador <osalvador@techadventures.net> Tested-by: Oscar Salvador <osalvador@techadventures.net> Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Reza Arbab <arbab@linux.vnet.ibm.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-25mm, memory_hotplug: make has_unmovable_pages more robustMichal Hocko1-6/+10
Oscar has reported: : Due to an unfortunate setting with movablecore, memblocks containing bootmem : memory (pages marked by get_page_bootmem()) ended up marked in zone_movable. : So while trying to remove that memory, the system failed in do_migrate_range : and __offline_pages never returned. : : This can be reproduced by running : qemu-system-x86_64 -m 6G,slots=8,maxmem=8G -numa node,mem=4096M -numa node,mem=2048M : and movablecore=4G kernel command line : : linux kernel: BIOS-provided physical RAM map: : linux kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable : linux kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved : linux kernel: BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved : linux kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000bffdffff] usable : linux kernel: BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved : linux kernel: BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved : linux kernel: BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved : linux kernel: BIOS-e820: [mem 0x0000000100000000-0x00000001bfffffff] usable : linux kernel: NX (Execute Disable) protection: active : linux kernel: SMBIOS 2.8 present. : linux kernel: DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org : linux kernel: Hypervisor detected: KVM : linux kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved : linux kernel: e820: remove [mem 0x000a0000-0x000fffff] usable : linux kernel: last_pfn = 0x1c0000 max_arch_pfn = 0x400000000 : : linux kernel: SRAT: PXM 0 -> APIC 0x00 -> Node 0 : linux kernel: SRAT: PXM 1 -> APIC 0x01 -> Node 1 : linux kernel: ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] : linux kernel: ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] : linux kernel: ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff] : linux kernel: ACPI: SRAT: Node 1 PXM 1 [mem 0x140000000-0x1bfffffff] : linux kernel: ACPI: SRAT: Node 0 PXM 0 [mem 0x1c0000000-0x43fffffff] hotplug : linux kernel: NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x0 : linux kernel: NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0 : linux kernel: NODE_DATA(0) allocated [mem 0x13ffd6000-0x13fffffff] : linux kernel: NODE_DATA(1) allocated [mem 0x1bffd3000-0x1bfffcfff] : : zoneinfo shows that the zone movable is placed into both numa nodes: : Node 0, zone Movable : pages free 160140 : min 1823 : low 2278 : high 2733 : spanned 262144 : present 262144 : managed 245670 : Node 1, zone Movable : pages free 448427 : min 3827 : low 4783 : high 5739 : spanned 524288 : present 524288 : managed 515766 Note how only Node 0 has a hutplugable memory region which would rule it out from the early memblock allocations (most likely memmap). Node1 will surely contain memmaps on the same node and those would prevent offlining to succeed. So this is arguably a configuration issue. Although one could argue that we should be more clever and rule early allocations from the zone movable. This would be correct but probably not worth the effort considering what a hack movablecore is. Anyway, We could do better for those cases though. We rely on start_isolate_page_range resp. has_unmovable_pages to do their job. The first one isolates the whole range to be offlined so that we do not allocate from it anymore and the later makes sure we are not stumbling over non-migrateable pages. has_unmovable_pages is overly optimistic, however. It doesn't check all the pages if we are withing zone_movable because we rely that those pages will be always migrateable. As it turns out we are still not perfect there. While bootmem pages in zonemovable sound like a clear bug which should be fixed let's remove the optimization for now and warn if we encounter unmovable pages in zone_movable in the meantime. That should help for now at least. Btw. this wasn't a real problem until commit 72b39cfc4d75 ("mm, memory_hotplug: do not fail offlining too early") because we used to have a small number of retries and then failed. This turned out to be too fragile though. Link: http://lkml.kernel.org/r/20180523125555.30039-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Oscar Salvador <osalvador@techadventures.net> Tested-by: Oscar Salvador <osalvador@techadventures.net> Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Reza Arbab <arbab@linux.vnet.ibm.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-25mm/kasan: don't vfree() nonexistent vm_areaAndrey Ryabinin1-2/+61
KASAN uses different routines to map shadow for hot added memory and memory obtained in boot process. Attempt to offline memory onlined by normal boot process leads to this: Trying to vfree() nonexistent vm area (000000005d3b34b9) WARNING: CPU: 2 PID: 13215 at mm/vmalloc.c:1525 __vunmap+0x147/0x190 Call Trace: kasan_mem_notifier+0xad/0xb9 notifier_call_chain+0x166/0x260 __blocking_notifier_call_chain+0xdb/0x140 __offline_pages+0x96a/0xb10 memory_subsys_offline+0x76/0xc0 device_offline+0xb8/0x120 store_mem_state+0xfa/0x120 kernfs_fop_write+0x1d5/0x320 __vfs_write+0xd4/0x530 vfs_write+0x105/0x340 SyS_write+0xb0/0x140 Obviously we can't call vfree() to free memory that wasn't allocated via vmalloc(). Use find_vm_area() to see if we can call vfree(). Unfortunately it's a bit tricky to properly unmap and free shadow allocated during boot, so we'll have to keep it. If memory will come online again that shadow will be reused. Matthew asked: how can you call vfree() on something that isn't a vmalloc address? vfree() is able to free any address returned by __vmalloc_node_range(). And __vmalloc_node_range() gives you any address you ask. It doesn't have to be an address in [VMALLOC_START, VMALLOC_END] range. That's also how the module_alloc()/module_memfree() works on architectures that have designated area for modules. [aryabinin@virtuozzo.com: improve comments] Link: http://lkml.kernel.org/r/dabee6ab-3a7a-51cd-3b86-5468718e0390@virtuozzo.com [akpm@linux-foundation.org: fix typos, reflow comment] Link: http://lkml.kernel.org/r/20180201163349.8700-1-aryabinin@virtuozzo.com Fixes: fa69b5989bb0 ("mm/kasan: add support for memory hotplug") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Paul Menzel <pmenzel+linux-kasan-dev@molgen.mpg.de> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-25MAINTAINERS: change hugetlbfs maintainer and update filesMike Kravetz1-1/+7
The current hugetlbfs maintainer has not been active for more than a few years. I have been been active in this area for more than two years and plan to remain active in the foreseeable future. Also, update the hugetlbfs entry to include linux-mm mail list and additional hugetlbfs related files. hugetlb.c and hugetlb.h are not 100% hugetlbfs, but a majority of their content is hugetlbfs related. Link: http://lkml.kernel.org/r/20180518225236.19079-1-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Nadia Yvette Chambers <nyc@holomorphy.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-25ipc/shm: fix shmat() nil address after round-down when remappingDavidlohr Bueso1-2/+10
shmat()'s SHM_REMAP option forbids passing a nil address for; this is in fact the very first thing we check for. Andrea reported that for SHM_RND|SHM_REMAP cases we can end up bypassing the initial addr check, but we need to check again if the address was rounded down to nil. As of this patch, such cases will return -EINVAL. Link: http://lkml.kernel.org/r/20180503204934.kk63josdu6u53fbd@linux-n805 Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reported-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 07:58:24 +0000