summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2011-07-13slip: remove dead code within the slip initializationMatvejchikov Ilya1-18/+6
This following code contains a dead "if (dev).." block: ... for (i = 0; i < slip_maxdev; i++) { dev = slip_devs[i]; if (dev == NULL) break; } /* Sorry, too many, all slots in use */ if (i >= slip_maxdev) return NULL; if (dev) { sl = netdev_priv(dev); if (test_bit(SLF_INUSE, &sl->flags)) { unregister_netdevice(dev); dev = NULL; slip_devs[i] = NULL; } } ... The reason is that the code starting with "if (dev).." is never called as when we found an empty slot (dev == NULL) we break the loop and "if (dev).." not works eiter the loop ends and we get out with "i >= slip_maxdev". Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-13slip: remove redundant check slip_devs for NULLMatvejchikov Ilya1-3/+0
As slip_devs is initialized on module load stage there is no reason to check it for NULL anywhere instead of the deinitialization routine because if we can't get enough memory on startup we don't run at all. Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-13slip: fix MTU comparation operation when reallocating buffersMatvejchikov Ilya1-1/+1
In sl_realloc_bufs() there is no reason to check if the requested MTU greater than or equal to the current MTU value as this function called only when requested MTU not equals to the current value. So, the ">=" operation can be safely replaced with the ">". Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-13slip: remove redundant NULL-pointer check before calling slhc_freeMatvejchikov Ilya1-2/+1
Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-13net: Kill support for multiple hh_cache entries per neighbourDavid S. Miller2-26/+20
This never, ever, happens. Neighbour entries are always tied to one address family, and therefore one set of dst_ops, and therefore one dst_ops->protocol "hh_type" value. This capability was blindly imported by Alexey Kuznetsov when he wrote the neighbour layer. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-13net: Push protocol type directly down to header_ops->cache()David S. Miller7-13/+13
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-13ipv4: Inline neigh binding.David Miller3-28/+59
Get rid of all of the useless and costly indirection by doing the neigh hash table lookup directly inside of the neighbour binding. Rename from arp_bind_neighbour to rt_bind_neighbour. Use new helpers {__,}ipv4_neigh_lookup() In rt_bind_neighbour() get rid of useless tests which are never true in the context this function is called, namely dev is never NULL and the dst->neighbour is always NULL. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-12net: Add documentation for netdev features handlingMichał Mirosław1-0/+154
v2: incorporated suggestions from Randy Dunlap Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-12be2net: move to new vlan modelAjit Khaparde2-26/+9
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-12be2net: account for skb allocation failuresEric Dumazet3-2/+4
If we cannot allocate new skbs in RX completion handler, we should increase netdevice rx_dropped counter, not spam console messages. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-12e1000e: use GFP_KERNEL allocations at init timeJeff Kirsher2-17/+22
In process and sleep allowed context, favor GFP_KERNEL allocations over GFP_ATOMIC ones. -v2: fixed checkpatch.pl warnings CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Ben Greear <greearb@candelatech.com> CC: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-12e1000e: Add Jumbo Frame support to 82583 devicesCarolyn Wyborny1-3/+2
This patch adds support for the Jumbo Frames feature on 82583 devices. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-12netdevice: Kill 'feature' test macros.David S. Miller5-61/+0
Almost all of these have long outstayed their welcome. And for every one of these macros, there are 10 features for which we didn't add macros. Let's just delete them all, and get out of habit of doing things this way. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-07-12lanai: use pci_dev->subsystem_deviceSergei Shtylyov1-8/+1
The driver reads PCI subsystem IDs from the PCI configuration registers while it is already stored by the PCI subsystem in the 'subsystem_device' field of 'struct pci_dev'... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-11drivers/net: static should be at beginning of declarationJesper Juhl1-6/+6
Make sure that the 'static' keywork is at the beginning of declaration for drivers/net/usb/kalmia.c This gets rid of warnings like warning: ‘static’ is not at beginning of declaration when building with -Wold-style-declaration (and/or -Wextra which also enables it). Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-11inetpeer: kill inet_putpeer raceEric Dumazet1-5/+9
We currently can free inetpeer entries too early : [ 782.636674] WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (f130f44c) [ 782.636677] 1f7b13c100000000000000000000000002000000000000000000000000000000 [ 782.636686] i i i i u u u u i i i i u u u u i i i i u u u u u u u u u u u u [ 782.636694] ^ [ 782.636696] [ 782.636698] Pid: 4638, comm: ssh Not tainted 3.0.0-rc5+ #270 Hewlett-Packard HP Compaq 6005 Pro SFF PC/3047h [ 782.636702] EIP: 0060:[<c13fefbb>] EFLAGS: 00010286 CPU: 0 [ 782.636707] EIP is at inet_getpeer+0x25b/0x5a0 [ 782.636709] EAX: 00000002 EBX: 00010080 ECX: f130f3c0 EDX: f0209d30 [ 782.636711] ESI: 0000bc87 EDI: 0000ea60 EBP: f0209ddc ESP: c173134c [ 782.636712] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 782.636714] CR0: 8005003b CR2: f0beca80 CR3: 30246000 CR4: 000006d0 [ 782.636716] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 782.636717] DR6: ffff4ff0 DR7: 00000400 [ 782.636718] [<c13fbf76>] rt_set_nexthop.clone.45+0x56/0x220 [ 782.636722] [<c13fc449>] __ip_route_output_key+0x309/0x860 [ 782.636724] [<c141dc54>] tcp_v4_connect+0x124/0x450 [ 782.636728] [<c142ce43>] inet_stream_connect+0xa3/0x270 [ 782.636731] [<c13a8da1>] sys_connect+0xa1/0xb0 [ 782.636733] [<c13a99dd>] sys_socketcall+0x25d/0x2a0 [ 782.636736] [<c149deb8>] sysenter_do_call+0x12/0x28 [ 782.636738] [<ffffffff>] 0xffffffff Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-11e1000e: remove e1000_queue_statsEric Dumazet1-7/+0
struct e1000_queue_stats is not used, lets remove it Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-11net: introduce __netdev_alloc_skb_ip_alignEric Dumazet1-3/+9
RX rings should use GFP_KERNEL allocations if possible, add __netdev_alloc_skb_ip_align() helper to ease this. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-11Merge branch 'master' of ↵David S. Miller18-23/+43
master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-next-2.6
2011-07-11ixgbe: Make certain to initialize the fdir_perfect_lock in all casesAlexander Duyck1-2/+3
This fix makes it so that the fdir_perfect_lock is initialized in all cases. This is necessary as the fdir_filter_exit routine will always attempt to take the lock before inspecting the filter table. Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-11igb: Add support of SerDes Forced mode for certain hardwareCarolyn Wyborny3-4/+22
This patch changes the serdes link code to support a forced mode for some hardware, based on bit set in EEPROM. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-11igb: Update copyright on all igb driver files.Carolyn Wyborny17-17/+17
This patch updates the copyright on the igb driver files to 2011. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-11igb: Fix lack of flush after register write and before delayCarolyn Wyborny1-0/+1
Register writes followed by a delay are required to have a flush before the delay in order to commit the values to the register. Without the flush, the code following the delay may not function correctly. Reported-by: Tong Ho <tong.ho@ericsson.com> Reported-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-11ipv4: Use universal hash for ARP.David S. Miller3-2/+9
We need to make sure the multiplier is odd. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-11neigh: Store hash shift instead of mask.David S. Miller2-25/+24
And mask the hash function result by simply shifting down the "->hash_shift" most significant bits. Currently which bits we use is arbitrary since jhash produces entropy evenly across the whole hash function result. But soon we'll be using universal hashing functions, and in those cases more entropy exists in the higher bits than the lower bits, because they use multiplies. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-10skbuff: update struct sk_buff members commentsDaniel Baluta1-20/+22
Rearrange struct sk_buff members comments to follow their definition order. Also, add missing comments for ooo_okay and dropcount members. Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-09benet: Add missing comma between constant string arrayJoe Perches1-3/+3
Multiple quoted strings are concatenated without comma separators. Make the arrays const while there. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-09skbuff: clear tx zero-copy flagShirley Ma1-0/+3
This patch clears tx zero-copy flag as needed. Signed-off-by: Shirley Ma <xma@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-08Merge branch 'for-davem' of ↵David S. Miller124-1033/+6268
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-07-08bna: use netdev_alloc_skb_ip_align()Eric Dumazet1-4/+2
Some workloads need some headroom (NET_SKB_PAD) to avoid expensive reallocations. Using netdev_alloc_skb_ip_align() instead of bare skb_alloc() brings the NET_IP_ALIGN and the NET_SKB_PAD headroom. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Rasesh Mody <rmody@brocade.com> CC: Debashis Dutt <ddutt@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-08ATM: Delete no use FILL_RX_POOLS_IN_BH marcoWang Shaoyan2-14/+1
The macro FILL_RX_POOLS_IN_BH is never been used, in order to avoid the compiler reports error because of the usage of function INIT_WORK, we just delete the marco. Cc: Chas Williams <chas@cmf.nrl.navy.mil> Cc: linux-atm-general@lists.sourceforge.net Signed-off-by: Wang Shaoyan <wangshaoyan.pt@taobao.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-08drivers/net: Omit check for multicast bit in netdev_for_each_mc_addrTobias Klauser20-141/+35
There is no need to check for the address being a multicast address in the netdev_for_each_mc_addr loop, so remove it. This patch covers all remaining network drivers still containing such a check. Cc: Joe Perches <joe@perches.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-08dcbnl: unlock on an error path in dcbnl_cee_fill()Dan Carpenter1-1/+1
We need to release "dcb_lock" which we took on the previous line. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-08skge/sky2: change config references to Marvellstephen hemminger1-4/+4
Change references to SysKonnect in Kconfig to Marvell since SysKonnect was acquired by Marvell back in 2002. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-08sky2: version 1.29stephen hemminger1-1/+1
Since new hardware chip support was added bump version. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-08sky2: support for new Optima chipsets (EXPERIMENTAL)stephen hemminger2-8/+89
This is a backport from the vendor driver of support for the newer Optima (Prime and 2) chipsets. It also includes some setup changes for the current Optima chip as well. The code and comments intentionally mirror the vendor sk98lin driver to allow for easier maintenance. Although this adds support for new chip id's, these chip id's are not used by any of the current PCI device id's listed in the driver. The patch is just to get initial infrastructure in place to handle them when they come. I don't have access to any of this hardware to actually test it yet. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-08sky2: use correct Inter Packet Gap at 10/100mbitstephen hemminger2-6/+26
This is another fix picked out of the vendor driver. The IPG value in the serial mode register is supposed to be programmed differently at lower speeds. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-08sky2: force receive checksum when using RSS on some hardware (v2)stephen hemminger2-3/+18
Found when reviewing the vendor driver. Apparently some chip versions require receive checksumming to be enabled in order for RSS to work. Also, if fix_features has to change some settings; put in message in log in similar manner to netdev_fix_features. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-08Merge branch 'batman-adv/next' of git://git.open-mesh.org/linux-mergeDavid S. Miller6-32/+147
2011-07-08Merge branch 'master' of ↵John W. Linville124-1033/+6268
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-07-07rt2x00: Implement tx_frames_pending mac80211 callback function.Gertjan van Wingerde9-0/+22
Implementing this callback function will cause mac80211 refrain from going to powersave state when there are still untransmitted TX frames in the queues. This would exactly mimic the behaviour of the legacy vendor driver which also doesn't go in powersave mode if there are still TX frames that are not transmitted. This should make powersaving and rt2x00 a better couple. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-07rt2x00: Properly identify rt2800usb devices.Gertjan van Wingerde1-2/+2
Sitecom WLA4000 (USB ID 0x0df6:0x0060) is an RT3072 chipset. Sitecom WLA5000 (USB ID 0x0df6:0x0062) is an RT3572 chipset. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-07rt2x00: Add device ID for RT539F device.Gertjan van Wingerde1-0/+1
Reported-by: Wim Vander Schelden <wim@fixnum.org> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-07rt2x00: Reduce window of a queue's tx lock.Gertjan van Wingerde1-25/+26
Currently a lot of actions that can be done without the queue's tx lock being held are done inside the locked area. Move them out to have a leaner and meaner code that operates while the tx lock is being held. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-07rt2x00: Don't use queue entry as parameter when creating TX descriptor.Gertjan van Wingerde3-28/+33
The functions that create the tx descriptor structure do not operate on a queue entry at all. Signal this fact in the code by not providing a queue entry as a parameter, but the rt2x00 device structure and the skb directly. This patch is a preparation for reducing the time a queue is locked for a tx operation. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-07rt2x00: Serialize TX operations on a queue.Gertjan van Wingerde2-5/+18
The rt2x00 driver gets frequent occurrences of the following error message when operating under load: phy0 -> rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 2. This is caused by simultaneous attempts from mac80211 to send a frame via rt2x00, which are not properly serialized inside rt2x00queue_write_tx_frame, causing the second frame to fail sending with the above mentioned error message. Fix this by introducing a per-queue spinlock to serialize the TX operations on that queue. Reported-by: Andreas Hartmann <andihartmann@01019freenet.de> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-07bcma: detect PCI core working in hostmodeRafał Miłecki5-1/+62
We must not init it like clientmode one, it would break device (tested by Hauke on BCM4718). Add stub hostmode driver for now. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-07batman-adv: request the full table if tt_crc doesn't matchAntonio Quartulli1-0/+12
In case of tt_crc mismatching for a certain orig_node after applying the changes, the node must request the full table immediately. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-07-07batman-adv: keep global table consistency in case of roamingAntonio Quartulli1-2/+8
To keep consistency of other originator tables, new clients detected as roamed, are kept in the global table but are marked as TT_CLIENT_PENDING They are purged only when the new ttvn is received by the corresponding originator. Moreover they need to be considered as removed in case of global transtable lookup. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-07-07batman-adv: keep local table consistency for further TT_RESPONSEAntonio Quartulli4-30/+125
To keep transtable consistency among all the nodes, an originator must not send not yet announced clients within a full table TT_RESPONSE. Instead, deleted client have to be kept in the table in order to be sent within an immediate TT_RESPONSE. In this way all the nodes in the network will always provide the same response for the same request. All the modification are committed at the next ttvn increment event. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 02:15:12 +0000