Age | Commit message (Collapse) | Author | Files | Lines |
|
Some interrupt handlers have an "extra" that saves 1 or 2
registers (r14, r15) in the paca save area and makes them available to
use by the handler.
The change to always save nvgprs in exception handlers lead to some
interrupt handlers saving those scratch r14 / r15 registers into the
interrupt frame's GPR saves, which get restored on interrupt exit.
Fix this by always reloading those scratch registers from paca before
the EXCEPTION_COMMON that saves nvgprs.
Fixes: 4228b2c3d20e ("powerpc/64e/interrupt: always save nvgprs on interrupt")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210514044008.1955783-1-npiggin@gmail.com
|
|
scv support introduced the notion of code that implicitly soft-masks
irqs due to the instruction addresses. This is required because scv
enters the kernel with MSR[EE]=1.
If a NMI (including soft-NMI) interrupt hits when we are implicitly
soft-masked then its regs->softe does not reflect this because it is
derived from the explicit soft mask state (paca->irq_soft_mask). This
makes arch_irq_disabled_regs(regs) return false.
This can trigger a warning in the soft-NMI watchdog code (shown below).
Fix it by having NMI interrupts set regs->softe to disabled in case of
interrupting an implicit soft-masked region.
------------[ cut here ]------------
WARNING: CPU: 41 PID: 1103 at arch/powerpc/kernel/watchdog.c:259 soft_nmi_interrupt+0x3e4/0x5f0
CPU: 41 PID: 1103 Comm: (spawn) Not tainted
NIP: c000000000039534 LR: c000000000039234 CTR: c000000000009a00
REGS: c000007fffbcf940 TRAP: 0700 Not tainted
MSR: 9000000000021033 <SF,HV,ME,IR,DR,RI,LE> CR: 22042482 XER: 200400ad
CFAR: c000000000039260 IRQMASK: 3
GPR00: c000000000039204 c000007fffbcfbe0 c000000001d6c300 0000000000000003
GPR04: 00007ffffa45d078 0000000000000000 0000000000000008 0000000000000020
GPR08: 0000007ffd4e0000 0000000000000000 c000007ffffceb00 7265677368657265
GPR12: 9000000000009033 c000007ffffceb00 00000f7075bf4480 000000000000002a
GPR16: 00000f705745a528 00007ffffa45ddd8 00000f70574d0008 0000000000000000
GPR20: 00000f7075c58d70 00000f7057459c38 0000000000000001 0000000000000040
GPR24: 0000000000000000 0000000000000029 c000000001dae058 0000000000000029
GPR28: 0000000000000000 0000000000000800 0000000000000009 c000007fffbcfd60
NIP [c000000000039534] soft_nmi_interrupt+0x3e4/0x5f0
LR [c000000000039234] soft_nmi_interrupt+0xe4/0x5f0
Call Trace:
[c000007fffbcfbe0] [c000000000039204] soft_nmi_interrupt+0xb4/0x5f0 (unreliable)
[c000007fffbcfcf0] [c00000000000c0e8] soft_nmi_common+0x138/0x1c4
--- interrupt: 900 at end_real_trampolines+0x0/0x1000
NIP: c000000000003000 LR: 00007ca426adb03c CTR: 900000000280f033
REGS: c000007fffbcfd60 TRAP: 0900
MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 44042482 XER: 200400ad
CFAR: 00007ca426946020 IRQMASK: 0
GPR00: 00000000000000ad 00007ffffa45d050 00007ca426b07f00 0000000000000035
GPR04: 00007ffffa45d078 0000000000000000 0000000000000008 0000000000000020
GPR08: 0000000000000000 0000000000100000 0000000010000000 00007ffffa45d110
GPR12: 0000000000000001 00007ca426d4e680 00000f7075bf4480 000000000000002a
GPR16: 00000f705745a528 00007ffffa45ddd8 00000f70574d0008 0000000000000000
GPR20: 00000f7075c58d70 00000f7057459c38 0000000000000001 0000000000000040
GPR24: 0000000000000000 00000f7057473f68 0000000000000003 000000000000041b
GPR28: 00007ffffa45d4c4 0000000000000035 0000000000000000 00000f7057473f68
NIP [c000000000003000] end_real_trampolines+0x0/0x1000
LR [00007ca426adb03c] 0x7ca426adb03c
--- interrupt: 900
Instruction dump:
60000000 60000000 60420000 38600001 482b3ae5 60000000 e93f0138 a36d0008
7daa6b78 71290001 7f7907b4 4082fd34 <0fe00000> 4bfffd2c 60420000 ea6100a8
---[ end trace dc75f67d819779da ]---
Fixes: 118178e62e2e ("powerpc: move NMI entry/exit code into wrapper")
Reported-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210503111708.758261-1-npiggin@gmail.com
|
|
The stf entry barrier fallback is unsafe to execute in a semi-patched
state, which can happen when enabling/disabling the mitigation with
strict kernel RWX enabled and using the hash MMU.
See the previous commit for more details.
Fix it by changing the order in which we patch the instructions.
Note the stf barrier fallback is only used on Power6 or earlier.
Fixes: bd573a81312f ("powerpc/mm/64s: Allow STRICT_KERNEL_RWX again")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210513140800.1391706-2-mpe@ellerman.id.au
|
|
The entry flush mitigation can be enabled/disabled at runtime. When this
happens it results in the kernel patching its own instructions to
enable/disable the mitigation sequence.
With strict kernel RWX enabled instruction patching happens via a
secondary mapping of the kernel text, so that we don't have to make the
primary mapping writable. With the hash MMU this leads to a hash fault,
which causes us to execute the exception entry which contains the entry
flush mitigation.
This means we end up executing the entry flush in a semi-patched state,
ie. after we have patched the first instruction but before we patch the
second or third instruction of the sequence.
On machines with updated firmware the entry flush is a series of special
nops, and it's safe to to execute in a semi-patched state.
However when using the fallback flush the sequence is mflr/branch/mtlr,
and so it's not safe to execute if we have patched out the mflr but not
the other two instructions. Doing so leads to us corrputing LR, leading
to an oops, for example:
# echo 0 > /sys/kernel/debug/powerpc/entry_flush
kernel tried to execute exec-protected page (c000000002971000) - exploit attempt? (uid: 0)
BUG: Unable to handle kernel instruction fetch
Faulting instruction address: 0xc000000002971000
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
CPU: 0 PID: 2215 Comm: bash Not tainted 5.13.0-rc1-00010-gda3bb206c9ce #1
NIP: c000000002971000 LR: c000000002971000 CTR: c000000000120c40
REGS: c000000013243840 TRAP: 0400 Not tainted (5.13.0-rc1-00010-gda3bb206c9ce)
MSR: 8000000010009033 <SF,EE,ME,IR,DR,RI,LE> CR: 48428482 XER: 00000000
...
NIP 0xc000000002971000
LR 0xc000000002971000
Call Trace:
do_patch_instruction+0xc4/0x340 (unreliable)
do_entry_flush_fixups+0x100/0x3b0
entry_flush_set+0x50/0xe0
simple_attr_write+0x160/0x1a0
full_proxy_write+0x8c/0x110
vfs_write+0xf0/0x340
ksys_write+0x84/0x140
system_call_exception+0x164/0x2d0
system_call_common+0xec/0x278
The simplest fix is to change the order in which we patch the
instructions, so that the sequence is always safe to execute. For the
non-fallback flushes it doesn't matter what order we patch in.
Fixes: bd573a81312f ("powerpc/mm/64s: Allow STRICT_KERNEL_RWX again")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210513140800.1391706-1-mpe@ellerman.id.au
|
|
The entry flush mitigation can be enabled/disabled at runtime via a
debugfs file (entry_flush), which causes the kernel to patch itself to
enable/disable the relevant mitigations.
However depending on which mitigation we're using, it may not be safe to
do that patching while other CPUs are active. For example the following
crash:
sleeper[15639]: segfault (11) at c000000000004c20 nip c000000000004c20 lr c000000000004c20
Shows that we returned to userspace with a corrupted LR that points into
the kernel, due to executing the partially patched call to the fallback
entry flush (ie. we missed the LR restore).
Fix it by doing the patching under stop machine. The CPUs that aren't
doing the patching will be spinning in the core of the stop machine
logic. That is currently sufficient for our purposes, because none of
the patching we do is to that code or anywhere in the vicinity.
Fixes: f79643787e0a ("powerpc/64s: flush L1D on kernel entry")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210506044959.1298123-2-mpe@ellerman.id.au
|
|
The STF (store-to-load forwarding) barrier mitigation can be
enabled/disabled at runtime via a debugfs file (stf_barrier), which
causes the kernel to patch itself to enable/disable the relevant
mitigations.
However depending on which mitigation we're using, it may not be safe to
do that patching while other CPUs are active. For example the following
crash:
User access of kernel address (c00000003fff5af0) - exploit attempt? (uid: 0)
segfault (11) at c00000003fff5af0 nip 7fff8ad12198 lr 7fff8ad121f8 code 1
code: 40820128 e93c00d0 e9290058 7c292840 40810058 38600000 4bfd9a81 e8410018
code: 2c030006 41810154 3860ffb6 e9210098 <e94d8ff0> 7d295279 39400000 40820a3c
Shows that we returned to userspace without restoring the user r13
value, due to executing the partially patched STF exit code.
Fix it by doing the patching under stop machine. The CPUs that aren't
doing the patching will be spinning in the core of the stop machine
logic. That is currently sufficient for our purposes, because none of
the patching we do is to that code or anywhere in the vicinity.
Fixes: a048a07d7f45 ("powerpc/64s: Add support for a store forwarding barrier at kernel entry/exit")
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210506044959.1298123-1-mpe@ellerman.id.au
|
|
Commit 32b48bf8514c ("KVM: PPC: Book3S HV: Fix conversion to gfn-based
MMU notifier callbacks") fixed kvm_unmap_gfn_range_hv() by adding a for
loop over each gfn in the range.
But for the Hash MMU it repeatedly calls kvm_unmap_rmapp() with the
first gfn of the range, rather than iterating through the range.
This exhibits as strange guest behaviour, sometimes crashing in firmare,
or booting and then guest userspace crashing unexpectedly.
Fix it by passing the iterator, gfn, to kvm_unmap_rmapp().
Fixes: 32b48bf8514c ("KVM: PPC: Book3S HV: Fix conversion to gfn-based MMU notifier callbacks")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210511105459.800788-1-mpe@ellerman.id.au
|
|
UBSAN complains when a pointer is calculated with invalid
'legacy_serial_console' index, allthough the index is verified
before dereferencing the pointer.
Fix it by checking 'legacy_serial_console' validity before
calculating pointers.
Fixes: 0bd3f9e953bd ("powerpc/legacy_serial: Use early_ioremap()")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210511010712.750096-1-mpe@ellerman.id.au
|
|
When neither CONFIG_VSX nor CONFIG_PPC_FPU_REGS are selected,
unsafe_copy_fpr_to_user() and unsafe_copy_fpr_from_user() are
doing nothing.
Then, unless the 'label' operand is used elsewhere, GCC complains
about it being defined but not used.
To fix that, add an impossible 'goto label'.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cadc0a328bc8e6c5bf133193e7547d5c10ae7895.1620465920.git.christophe.leroy@csgroup.eu
|
|
Building kernel mainline with GCC 11 leads to following failure
when starting 'init':
init[1]: bad frame in sys_sigreturn: 7ff5a900 nip 001083cc lr 001083c4
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
This is an issue due to a segfault happening in
__unsafe_restore_general_regs() in a loop copying registers from user
to kernel:
10: 7d 09 03 a6 mtctr r8
14: 80 ca 00 00 lwz r6,0(r10)
18: 80 ea 00 04 lwz r7,4(r10)
1c: 90 c9 00 08 stw r6,8(r9)
20: 90 e9 00 0c stw r7,12(r9)
24: 39 0a 00 08 addi r8,r10,8
28: 39 29 00 08 addi r9,r9,8
2c: 81 4a 00 08 lwz r10,8(r10) <== r10 is clobbered here
30: 81 6a 00 0c lwz r11,12(r10)
34: 91 49 00 08 stw r10,8(r9)
38: 91 69 00 0c stw r11,12(r9)
3c: 39 48 00 08 addi r10,r8,8
40: 39 29 00 08 addi r9,r9,8
44: 42 00 ff d0 bdnz 14 <__unsafe_restore_general_regs+0x14>
As shown above, this is due to r10 being re-used by GCC. This didn't
happen with CLANG.
This is fixed by tagging 'x' output as an earlyclobber operand in
__get_user_asm2_goto().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cf0a050d124d4f426cdc7a74009d17b01d8d8969.1620465917.git.christophe.leroy@csgroup.eu
|
|
The hcall tracing code has a recursion check built in, which skips
tracing if we are already tracing an hcall.
However if the tracing code has problems with recursion, this check
may not catch all cases because the tracing code could be invoked from
a different tracepoint first, then make an hcall that gets traced,
then recurse.
Add an explicit warning if recursion is detected here, which might help
to notice tracing code making hcalls. Really the core trace code should
have its own recursion checking and warnings though.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210508101455.1578318-5-npiggin@gmail.com
|
|
Rather than special-case H_CEDE in the hcall trace wrappers, make the
idle H_CEDE call use plpar_hcall_norets_notrace().
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210508101455.1578318-4-npiggin@gmail.com
|
|
This doesn't seem very useful to trace before the recursion check, even
if the ftrace code has any recursion checks of its own. Be on the safe
side and don't trace the hcall trace wrappers.
Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210508101455.1578318-3-npiggin@gmail.com
|
|
The paravit queued spinlock slow path adds itself to the queue then
calls pv_wait to wait for the lock to become free. This is implemented
by calling H_CONFER to donate cycles.
When hcall tracing is enabled, this H_CONFER call can lead to a spin
lock being taken in the tracing code, which will result in the lock to
be taken again, which will also go to the slow path because it queues
behind itself and so won't ever make progress.
An example trace of a deadlock:
__pv_queued_spin_lock_slowpath
trace_clock_global
ring_buffer_lock_reserve
trace_event_buffer_lock_reserve
trace_event_buffer_reserve
trace_event_raw_event_hcall_exit
__trace_hcall_exit
plpar_hcall_norets_trace
__pv_queued_spin_lock_slowpath
trace_clock_global
ring_buffer_lock_reserve
trace_event_buffer_lock_reserve
trace_event_buffer_reserve
trace_event_raw_event_rcu_dyntick
rcu_irq_exit
irq_exit
__do_irq
call_do_irq
do_IRQ
hardware_interrupt_common_virt
Fix this by introducing plpar_hcall_norets_notrace(), and using that to
make SPLPAR virtual processor dispatching hcalls by the paravirt
spinlock code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210508101455.1578318-2-npiggin@gmail.com
|
|
kuap_save_and_lock() is only for interrupts inside kernel.
system call are only from user, calling kuap_save_and_lock()
is wrong.
Fixes: c16728835eec ("powerpc/32: Manage KUAP in C")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/332773775cf24a422105dee2d383fb8f04589045.1620302182.git.christophe.leroy@csgroup.eu
|
|
Same as kuap_user_restore(), kuep_unlock() has to be called when
really returning to user, that is in interrupt_exit_user_prepare(),
not in interrupt_exit_prepare().
Fixes: b5efec00b671 ("powerpc/32s: Move KUEP locking/unlocking in C")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b831e54a2579db24fbef836ed415588ce2b3e825.1620312573.git.christophe.leroy@csgroup.eu
|
|
|
|
Commit b9d79e4ca4ff ("fbmem: Mark proc_fb_seq_ops as __maybe_unused")
places the '__maybe_unused' in an entirely incorrect location between
the "struct" keyword and the structure name.
It's a wonder that gcc accepts that silently, but clang quite reasonably
warns about it:
drivers/video/fbdev/core/fbmem.c:736:21: warning: attribute declaration must precede definition [-Wignored-attributes]
static const struct __maybe_unused seq_operations proc_fb_seq_ops = {
^
Fix it.
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull drm fixes from Dave Airlie:
"Bit later than usual, I queued them all up on Friday then promptly
forgot to write the pull request email. This is mainly amdgpu fixes,
with some radeon/msm/fbdev and one i915 gvt fix thrown in.
amdgpu:
- MPO hang workaround
- Fix for concurrent VM flushes on vega/navi
- dcefclk is not adjustable on navi1x and newer
- MST HPD debugfs fix
- Suspend/resumes fixes
- Register VGA clients late in case driver fails to load
- Fix GEM leak in user framebuffer create
- Add support for polaris12 with 32 bit memory interface
- Fix duplicate cursor issue when using overlay
- Fix corruption with tiled surfaces on VCN3
- Add BO size and stride check to fix BO size verification
radeon:
- Fix off-by-one in power state parsing
- Fix possible memory leak in power state parsing
msm:
- NULL ptr dereference fix
fbdev:
- procfs disabled warning fix
i915:
- gvt: Fix a possible division by zero in vgpu display rate
calculation"
* tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: Use device specific BO size & stride check.
drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode.
drm/amd/pm: initialize variable
drm/radeon: Avoid power table parsing memory leaks
drm/radeon: Fix off-by-one power_state index heap overwrite
drm/amd/display: Fix two cursor duplication when using overlay
drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC
fbmem: Mark proc_fb_seq_ops as __maybe_unused
drm/msm/dpu: Delete bonkers code
drm/i915/gvt: Prevent divided by zero when calculating refresh rate
amdgpu: fix GEM obj leak in amdgpu_display_user_framebuffer_create
drm/amdgpu: Register VGA clients after init can no longer fail
drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown
drm/amdgpu: fix r initial values
drm/amd/display: fix wrong statement in mst hpd debugfs
amdgpu/pm: set pp_dpm_dcefclk to readonly on NAVI10 and newer gpus
amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLID
drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2
drm/amd/display: Reject non-zero src_y and src_x for video planes
|
|
Pull block fix from Jens Axboe:
"Turns out the bio max size change still has issues, so let's get it
reverted for 5.13-rc1. We'll shake out the issues there and defer it
to 5.14 instead"
* tag 'block-5.13-2021-05-09' of git://git.kernel.dk/linux-block:
Revert "bio: limit bio max size"
|
|
Pull cifs fixes from Steve French:
"Three small SMB3 chmultichannel related changesets (also for stable)
from the SMB3 test event this week.
The other fixes are still in review/testing"
* tag '5.13-rc-smb3-part3' of git://git.samba.org/sfrench/cifs-2.6:
smb3: if max_channels set to more than one channel request multichannel
smb3: do not attempt multichannel to server which does not support it
smb3: when mounting with multichannel include it in requested capabilities
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"A set of scheduler updates:
- Prevent PSI state corruption when schedule() races with cgroup
move.
A recent commit combined two PSI callbacks to reduce the number of
cgroup tree updates, but missed that schedule() can drop rq::lock
for load balancing, which opens the race window for
cgroup_move_task() which then observes half updated state.
The fix is to solely use task::ps_flags instead of looking at the
potentially mismatching scheduler state
- Prevent an out-of-bounds access in uclamp caused bu a rounding
division which can lead to an off-by-one error exceeding the
buckets array size.
- Prevent unfairness caused by missing load decay when a task is
attached to a cfs runqueue.
The old load of the task was attached to the runqueue and never
removed. Fix it by enforcing the load update through the hierarchy
for unthrottled run queue instances.
- A documentation fix fot the 'sched_verbose' command line option"
* tag 'sched-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix unfairness caused by missing load decay
sched: Fix out-of-bound access in uclamp
psi: Fix psi state corruption when schedule() races with cgroup move
sched,doc: sched_debug_verbose cmdline should be sched_verbose
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"A set of locking related fixes and updates:
- Two fixes for the futex syscall related to the timeout handling.
FUTEX_LOCK_PI does not support the FUTEX_CLOCK_REALTIME bit and
because it's not set the time namespace adjustment for clock
MONOTONIC is applied wrongly.
FUTEX_WAIT cannot support the FUTEX_CLOCK_REALTIME bit because its
always a relative timeout.
- Cleanups in the futex syscall entry points which became obvious
when the two timeout handling bugs were fixed.
- Cleanup of queued_write_lock_slowpath() as suggested by Linus
- Fixup of the smp_call_function_single_async() prototype"
* tag 'locking-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Make syscall entry points less convoluted
futex: Get rid of the val2 conditional dance
futex: Do not apply time namespace adjustment on FUTEX_LOCK_PI
Revert 337f13046ff0 ("futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op")
locking/qrwlock: Cleanup queued_write_lock_slowpath()
smp: Fix smp_call_function_single_async prototype
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Borislav Petkov:
"Handle power-gating of AMD IOMMU perf counters properly when they are
used"
* tag 'perf_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/events/amd/iommu: Fix invalid Perf result due to IOMMU PMC power-gating
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"A bunch of things accumulated for x86 in the last two weeks:
- Fix guest vtime accounting so that ticks happening while the guest
is running can also be accounted to it. Along with a consolidation
to the guest-specific context tracking helpers.
- Provide for the host NMI handler running after a VMX VMEXIT to be
able to run on the kernel stack correctly.
- Initialize MSR_TSC_AUX when RDPID is supported and not RDTSCP (virt
relevant - real hw supports both)
- A code generation improvement to TASK_SIZE_MAX through the use of
alternatives
- The usual misc and related cleanups and improvements"
* tag 'x86_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM: x86: Consolidate guest enter/exit logic to common helpers
context_tracking: KVM: Move guest enter/exit wrappers to KVM's domain
context_tracking: Consolidate guest enter/exit wrappers
sched/vtime: Move guest enter/exit vtime accounting to vtime.h
sched/vtime: Move vtime accounting external declarations above inlines
KVM: x86: Defer vtime accounting 'til after IRQ handling
context_tracking: Move guest exit vtime accounting to separate helpers
context_tracking: Move guest exit context tracking to separate helpers
KVM/VMX: Invoke NMI non-IST entry instead of IST entry
x86/cpu: Remove write_tsc() and write_rdtscp_aux() wrappers
x86/cpu: Initialize MSR_TSC_AUX if RDTSCP *or* RDPID is supported
x86/resctrl: Fix init const confusion
x86: Delete UD0, UD1 traces
x86/smpboot: Remove duplicate includes
x86/cpu: Use alternative to generate the TASK_SIZE_MAX constant
|
|
This reverts commit cd2c7545ae1beac3b6aae033c7f31193b3255946.
Alex reports that the commit causes corruption with LUKS on ext4. Revert
it for now so that this can be investigated properly.
Link: https://lore.kernel.org/linux-block/1620493841.bxdq8r5haw.none@localhost/
Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid over-allocating the kernel's mapping on !MMU systems,
which could lead to up to 2MiB of lost memory
- The SiFive address extension errata only manifest on rv64, they are
now disabled on rv32 where they are unnecessary
- A pair of late-landing cleanups
* tag 'riscv-for-linus-5.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: remove unused handle_exception symbol
riscv: Consistify protect_kernel_linear_mapping_text_rodata() use
riscv: enable SiFive errata CIP-453 and CIP-1200 Kconfig only if CONFIG_64BIT=y
riscv: Only extend kernel reservation if mapped read-only
|
|
intel_dp_check_mst_status() uses a 14-byte array to read the DPRX Event
Status Indicator data, but then passes that buffer at offset 10 off as
an argument to drm_dp_channel_eq_ok().
End result: there are only 4 bytes remaining of the buffer, yet
drm_dp_channel_eq_ok() wants a 6-byte buffer. gcc-11 correctly warns
about this case:
drivers/gpu/drm/i915/display/intel_dp.c: In function ‘intel_dp_check_mst_status’:
drivers/gpu/drm/i915/display/intel_dp.c:3491:22: warning: ‘drm_dp_channel_eq_ok’ reading 6 bytes from a region of size 4 [-Wstringop-overread]
3491 | !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/display/intel_dp.c:3491:22: note: referencing argument 1 of type ‘const u8 *’ {aka ‘const unsigned char *’}
In file included from drivers/gpu/drm/i915/display/intel_dp.c:38:
include/drm/drm_dp_helper.h:1466:6: note: in a call to function ‘drm_dp_channel_eq_ok’
1466 | bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE],
| ^~~~~~~~~~~~~~~~~~~~
6:14 elapsed
This commit just extends the original array by 2 zero-initialized bytes,
avoiding the warning.
There may be some underlying bug in here that caused this confusion, but
this is at least no worse than the existing situation that could use
random data off the stack.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull more SCSI updates from James Bottomley:
"This is a set of minor fixes in various drivers (qla2xxx, ufs,
scsi_debug, lpfc) one doc fix and a fairly large update to the fnic
driver to remove the open coded iteration functions in favour of the
scsi provided ones"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: fnic: Use scsi_host_busy_iter() to traverse commands
scsi: fnic: Kill 'exclude_id' argument to fnic_cleanup_io()
scsi: scsi_debug: Fix cmd_per_lun, set to max_queue
scsi: ufs: core: Narrow down fast path in system suspend path
scsi: ufs: core: Cancel rpm_dev_flush_recheck_work during system suspend
scsi: ufs: core: Do not put UFS power into LPM if link is broken
scsi: qla2xxx: Prevent PRLI in target mode
scsi: qla2xxx: Add marginal path handling support
scsi: target: tcmu: Return from tcmu_handle_completions() if cmd_id not found
scsi: ufs: core: Fix a typo in ufs-sysfs.c
scsi: lpfc: Fix bad memory access during VPD DUMP mailbox command
scsi: lpfc: Fix DMA virtual address ptr assignment in bsg
scsi: lpfc: Fix illegal memory access on Abort IOCBs
scsi: blk-mq: Fix build warning when making htmldocs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- Convert sh and sparc to use generic shell scripts to generate the
syscall headers
- refactor .gitignore files
- Update kernel/config_data.gz only when the content of the .config
is really changed, which avoids the unneeded re-link of vmlinux
- move "remove stale files" workarounds to scripts/remove-stale-files
- suppress unused-but-set-variable warnings by default for Clang
as well
- fix locale setting LANG=C to LC_ALL=C
- improve 'make distclean'
- always keep intermediate objects from scripts/link-vmlinux.sh
- move IF_ENABLED out of <linux/kconfig.h> to make it self-contained
- misc cleanups
* tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h>
kbuild: Don't remove link-vmlinux temporary files on exit/signal
kbuild: remove the unneeded comments for external module builds
kbuild: make distclean remove tag files in sub-directories
kbuild: make distclean work against $(objtree) instead of $(srctree)
kbuild: refactor modname-multi by using suffix-search
kbuild: refactor fdtoverlay rule
kbuild: parameterize the .o part of suffix-search
arch: use cross_compiling to check whether it is a cross build or not
kbuild: remove ARCH=sh64 support from top Makefile
.gitignore: prefix local generated files with a slash
kbuild: replace LANG=C with LC_ALL=C
Makefile: Move -Wno-unused-but-set-variable out of GCC only block
kbuild: add a script to remove stale generated files
kbuild: update config_data.gz only when the content of .config is changed
.gitignore: ignore only top-level modules.builtin
.gitignore: move tags and TAGS close to other tag files
kernel/.gitgnore: remove stale timeconst.h and hz.bc
usr/include: refactor .gitignore
genksyms: fix stale comment
...
|
|
Mounting with "multichannel" is obviously implied if user requested
more than one channel on mount (ie mount parm max_channels>1).
Currently both have to be specified. Fix that so that if max_channels
is greater than 1 on mount, enable multichannel rather than silently
falling back to non-multichannel.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
Cc: <stable@vger.kernel.org> # v5.11+
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
|
|
We were ignoring CAP_MULTI_CHANNEL in the server response - if the
server doesn't support multichannel we should not be attempting it.
See MS-SMB2 section 3.2.5.2
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates and fixes from Michael Ellerman:
"A bit of a mixture of things, tying up some loose ends.
There's the removal of the nvlink code, which dependend on a commit in
the vfio tree. Then the enablement of huge vmalloc which was in next
for a few weeks but got dropped due to conflicts. And there's also a
few fixes.
Summary:
- Remove the nvlink support now that it's only user has been removed.
- Enable huge vmalloc mappings for Radix MMU (P9).
- Fix KVM conversion to gfn-based MMU notifier callbacks.
- Fix a kexec/kdump crash with hot plugged CPUs.
- Fix boot failure on 32-bit with CONFIG_STACKPROTECTOR.
- Restore alphabetic order of the selects under CONFIG_PPC.
Thanks to: Christophe Leroy, Christoph Hellwig, Nicholas Piggin,
Sandipan Das, and Sourabh Jain"
* tag 'powerpc-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Fix conversion to gfn-based MMU notifier callbacks
powerpc/kconfig: Restore alphabetic order of the selects under CONFIG_PPC
powerpc/32: Fix boot failure with CONFIG_STACKPROTECTOR
powerpc/powernv/memtrace: Fix dcache flushing
powerpc/kexec_file: Use current CPU info while setting up FDT
powerpc/64s/radix: Enable huge vmalloc mappings
powerpc/powernv: remove the nvlink support
|
|
In the SMB3/SMB3.1.1 negotiate protocol request, we are supposed to
advertise CAP_MULTICHANNEL capability when establishing multiple
channels has been requested by the user doing the mount. See MS-SMB2
sections 2.2.3 and 3.2.5.2
Without setting it there is some risk that multichannel could fail
if the server interpreted the field strictly.
Reviewed-By: Tom Talpey <tom@talpey.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc1, including fixes from bpf, can and
netfilter trees. Self-contained fixes, nothing risky.
Current release - new code bugs:
- dsa: ksz: fix a few bugs found by static-checker in the new driver
- stmmac: fix frame preemption handshake not triggering after
interface restart
Previous releases - regressions:
- make nla_strcmp handle more then one trailing null character
- fix stack OOB reads while fragmenting IPv4 packets in openvswitch
and net/sched
- sctp: do asoc update earlier in sctp_sf_do_dupcook_a
- sctp: delay auto_asconf init until binding the first addr
- stmmac: clear receive all(RA) bit when promiscuous mode is off
- can: mcp251x: fix resume from sleep before interface was brought up
Previous releases - always broken:
- bpf: fix leakage of uninitialized bpf stack under speculation
- bpf: fix masking negation logic upon negative dst register
- netfilter: don't assume that skb_header_pointer() will never fail
- only allow init netns to set default tcp cong to a restricted algo
- xsk: fix xp_aligned_validate_desc() when len == chunk_size to avoid
false positive errors
- ethtool: fix missing NLM_F_MULTI flag when dumping
- can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
- sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
- bridge: fix NULL-deref caused by a races between assigning
rx_handler_data and setting the IFF_BRIDGE_PORT bit
Latecomer:
- seg6: add counters support for SRv6 Behaviors"
* tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
atm: firestream: Use fallthrough pseudo-keyword
net: stmmac: Do not enable RX FIFO overflow interrupts
mptcp: fix splat when closing unaccepted socket
i40e: Remove LLDP frame filters
i40e: Fix PHY type identifiers for 2.5G and 5G adapters
i40e: fix the restart auto-negotiation after FEC modified
i40e: Fix use-after-free in i40e_client_subtask()
i40e: fix broken XDP support
netfilter: nftables: avoid potential overflows on 32bit arches
netfilter: nftables: avoid overflows in nft_hash_buckets()
tcp: Specify cmsgbuf is user pointer for receive zerocopy.
mlxsw: spectrum_mr: Update egress RIF list before route's action
net: ipa: fix inter-EE IRQ register definitions
can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
can: mcp251x: fix resume from sleep before interface was brought up
can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error path
can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probe
netfilter: nftables: Fix a memleak from userdata error path in new objects
netfilter: remove BUG_ON() after skb_header_pointer()
netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
...
|
|
<linux/kconfig.h> is included from all the kernel-space source files,
including C, assembly, linker scripts. It is intended to contain a
minimal set of macros to evaluate CONFIG options.
IF_ENABLED() is an intruder here because (x ? y : z) is C code, which
should not be included from assembly files or linker scripts.
Also, <linux/kconfig.h> is no longer self-contained because NULL is
defined in <linux/stddef.h>.
Move IF_ENABLED() out to <linux/kernel.h> as PTR_IF(). PTF_IF()
takes the general boolean expression instead of a CONFIG option
so that it fits better in <linux/kernel.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
|
|
Merge master back into next, this allows us to resolve some conflicts in
arch/powerpc/Kconfig, and also re-sort the symbols under config PPC so
that they are in alphabetical order again.
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Add SECMARK revision 1 to fix incorrect layout that prevents
from remove rule with this target, from Phil Sutter.
2) Fix pernet exit path spat in arptables, from Florian Westphal.
3) Missing rcu_read_unlock() for unknown nfnetlink callbacks,
reported by syzbot, from Eric Dumazet.
4) Missing check for skb_header_pointer() NULL pointer in
nfnetlink_osf.
5) Remove BUG_ON() after skb_header_pointer() from packet path
in several conntrack helper and the TCP tracker.
6) Fix memleak in the new object error path of userdata.
7) Avoid overflows in nft_hash_buckets(), reported by syzbot,
also from Eric.
8) Avoid overflows in 32bit arches, from Eric.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nftables: avoid potential overflows on 32bit arches
netfilter: nftables: avoid overflows in nft_hash_buckets()
netfilter: nftables: Fix a memleak from userdata error path in new objects
netfilter: remove BUG_ON() after skb_header_pointer()
netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
netfilter: nfnetlink: add a missing rcu_read_unlock()
netfilter: arptables: use pernet ops struct during unregister
netfilter: xt_SECMARK: add new revision to fix structure layout
====================
Link: https://lore.kernel.org/r/20210507174739.1850-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Nguyen, Anthony L says:
====================
Intel Wired LAN Driver Updates 2021-05-07
This series contains updates to i40e driver only.
Magnus fixes XDP by adding and correcting checks that were caused by a
previous commit which introduced a new variable but did not account for
it in all paths.
Yunjian Wang adds a return in an error path to prevent reading a freed
pointer.
Jaroslaw forces link reset when changing FEC so that changes take
affect.
Mateusz fixes PHY types for 2.5G and 5G as there is a differentiation on
PHY identifiers based on operation.
Arkadiusz removes filtering of LLDP frames for software DCB as this is
preventing them from being properly transmitted.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: Remove LLDP frame filters
i40e: Fix PHY type identifiers for 2.5G and 5G adapters
i40e: fix the restart auto-negotiation after FEC modified
i40e: Fix use-after-free in i40e_client_subtask()
i40e: fix broken XDP support
====================
Link: https://lore.kernel.org/r/20210507164151.2878147-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add pseudo-keyword macro fallthrough[1]
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Wei Ming Chen <jj251510319013@gmail.com>
Link: https://lore.kernel.org/r/20210507123843.10602-1-jj251510319013@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The RX FIFO overflows when the system is not able to process all received
packets and they start accumulating (first in the DMA queue in memory,
then in the FIFO). An interrupt is then raised for each overflowing packet
and handled in stmmac_interrupt(). This is counter-productive, since it
brings the system (or more likely, one CPU core) to its knees to process
the FIFO overflow interrupts.
stmmac_interrupt() handles overflow interrupts by writing the rx tail ptr
into the corresponding hardware register (according to the MAC spec, this
has the effect of restarting the MAC DMA). However, without freeing any rx
descriptors, the DMA stops right away, and another overflow interrupt is
raised as the FIFO overflows again. Since the DMA is already restarted at
the end of stmmac_rx_refill() after freeing descriptors, disabling FIFO
overflow interrupts and the corresponding handling code has no side effect,
and eliminates the interrupt storm when the RX FIFO overflows.
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Link: https://lore.kernel.org/r/20210506143312.20784-1-yannick.vignon@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If userspace exits before calling accept() on a listener that had at least
one new connection ready, we get:
Attempt to release TCP socket in state 8
This happens because the mptcp socket gets cloned when the TCP connection
is ready, but the socket is never exposed to userspace.
The client additionally sends a DATA_FIN, which brings connection into
CLOSE_WAIT state. This in turn prevents the orphan+state reset fixup
in mptcp_sock_destruct() from doing its job.
Fixes: 3721b9b64676b ("mptcp: Track received DATA_FIN sequence number and add related helpers")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/185
Tested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20210507001638.225468-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros_ec_typec:
- Changes around DP mode check, hard reset, tracking port change.
cros_ec misc:
- wilco_ec: Convert stream-like files from nonseekable to stream open
- cros_usbpd_notify: Listen to EC_HSOT_EVENT_USB_MUX host event
- fix format warning in cros_ec_typec"
* tag 'tag-chrome-platform-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_lpc: Use DEFINE_MUTEX() for mutex lock
platform/chrome: cros_usbpd_notify: Listen to EC_HOST_EVENT_USB_MUX host event
platform/chrome: cros_ec_typec: Add DP mode check
platform/chrome: cros_ec_typec: Handle hard reset
platform/chrome: cros_ec: Add Type C hard reset
platform/chrome: cros_ec_typec: Track port role
platform/chrome: cros_ec_typec: fix clang -Wformat warning
platform/chrome: cros_ec_typec: Check for device within remove function
platform/chrome: wilco_ec: convert stream-like files from nonseekable_open -> stream_open
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3cupdates from Alexandre Belloni:
"Fix i3c_master_register error path"
* tag 'i3c/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
Revert "i3c master: fix missing destroy_workqueue() on error in i3c_master_register"
dt-bindings: i3c: Fix silvaco,i3c-master-v1 compatible string
i3c: master: svc: remove redundant assignment to cmd->read_len
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull more arm64 updates from Catalin Marinas:
"A mix of fixes and clean-ups that turned up too late for the first
pull request:
- Restore terminal stack frame records. Their previous removal caused
traces which cross secondary_start_kernel to terminate one entry
too late, with a spurious "0" entry.
- Fix boot warning with pseudo-NMI due to the way we manipulate the
PMR register.
- ACPI fixes: avoid corruption of interrupt mappings on watchdog
probe failure (GTDT), prevent unregistering of GIC SGIs.
- Force SPARSEMEM_VMEMMAP as the only memory model, it saves with
having to test all the other combinations.
- Documentation fixes and updates: tagged address ABI exceptions on
brk/mmap/mremap(), event stream frequency, update booting
requirements on the configuration of traps"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kernel: Update the stale comment
arm64: Fix the documented event stream frequency
arm64: entry: always set GIC_PRIO_PSR_I_SET during entry
arm64: Explicitly document boot requirements for SVE
arm64: Explicitly require that FPSIMD instructions do not trap
arm64: Relax booting requirements for configuration of traps
arm64: cpufeatures: use min and max
arm64: stacktrace: restore terminal records
arm64/vdso: Discard .note.gnu.property sections in vDSO
arm64: doc: Add brk/mmap/mremap() to the Tagged Address ABI Exceptions
psci: Remove unneeded semicolon
ACPI: irq: Prevent unregistering of GIC SGIs
ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
arm64: Show three registers per line
arm64: remove HAVE_DEBUG_BUGVERBOSE
arm64: alternative: simplify passing alt_region
arm64: Force SPARSEMEM_VMEMMAP as the only memory management model
arm64: vdso32: drop -no-integrated-as flag
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few device-specific HD-audio and USB-audio fixes"
* tag 'sound-fix-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: generic: change the DAC ctl name for LO+SPK or LO+HP
ALSA: hda/realtek: Add fixup for HP OMEN laptop
ALSA: hda/realtek: Fix speaker amp on HP Envy AiO 32
ALSA: hda/realtek: Fix silent headphone output on ASUS UX430UA
ALSA: usb-audio: Add dB range mapping for Sennheiser Communications Headset PC 8
ALSA: hda/realtek: ALC285 Thinkpad jack pin quirk is unreachable
|
|
Pull block fixes from Jens Axboe:
- dasd spelling fixes (Bhaskar)
- Limit bio max size on multi-page bvecs to the hardware limit, to
avoid overly large bio's (and hence latencies). Originally queued for
the merge window, but needed a fix and was dropped from the initial
pull (Changheun)
- NVMe pull request (Christoph):
- reset the bdev to ns head when failover (Daniel Wagner)
- remove unsupported command noise (Keith Busch)
- misc passthrough improvements (Kanchan Joshi)
- fix controller ioctl through ns_head (Minwoo Im)
- fix controller timeouts during reset (Tao Chiu)
- rnbd fixes/cleanups (Gioh, Md, Dima)
- Fix iov_iter re-expansion (yangerkun)
* tag 'block-5.13-2021-05-07' of git://git.kernel.dk/linux-block:
block: reexpand iov_iter after read/write
nvmet: remove unsupported command noise
nvme-multipath: reset bdev to ns head when failover
nvme-pci: fix controller reset hang when racing with nvme_timeout
nvme: move the fabrics queue ready check routines to core
nvme: avoid memset for passthrough requests
nvme: add nvme_get_ns helper
nvme: fix controller ioctl through ns_head
bio: limit bio max size
RDMA/rtrs: fix uninitialized symbol 'cnt'
s390: dasd: Mundane spelling fixes
block/rnbd: Remove all likely and unlikely
block/rnbd-clt: Check the return value of the function rtrs_clt_query
block/rnbd: Fix style issues
block/rnbd-clt: Change queue_depth type in rnbd_clt_session to size_t
|
|
Pull io_uring fixes from Jens Axboe:
"Mostly fixes for merge window merged code. In detail:
- Error case memory leak fixes (Colin, Zqiang)
- Add the tools/io_uring/ to the list of maintained files (Lukas)
- Set of fixes for the modified buffer registration API (Pavel)
- Sanitize io thread setup on x86 (Stefan)
- Ensure we truncate transfer count for registered buffers (Thadeu)"
* tag 'io_uring-5.13-2021-05-07' of git://git.kernel.dk/linux-block:
x86/process: setup io_threads more like normal user space threads
MAINTAINERS: add io_uring tool to IO_URING
io_uring: truncate lengths larger than MAX_RW_COUNT on provide buffers
io_uring: Fix memory leak in io_sqe_buffers_register()
io_uring: Fix premature return from loop and memory leak
io_uring: fix unchecked error in switch_start()
io_uring: allow empty slots for reg buffers
io_uring: add more build check for uapi
io_uring: dont overlap internal and user req flags
io_uring: fix drain with rsrc CQEs
|
|
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable fixes:
- Add validation of the UDP retrans parameter to prevent shift
out-of-bounds
- Don't discard pNFS layout segments that are marked for return
Bugfixes:
- Fix a NULL dereference crash in xprt_complete_bc_request() when the
NFSv4.1 server misbehaves.
- Fix the handling of NFS READDIR cookie verifiers
- Sundry fixes to ensure attribute revalidation works correctly when
the server does not return post-op attributes.
- nfs4_bitmask_adjust() must not change the server global bitmasks
- Fix major timeout handling in the RPC code.
- NFSv4.2 fallocate() fixes.
- Fix the NFSv4.2 SEEK_HOLE/SEEK_DATA end-of-file handling
- Copy offload attribute revalidation fixes
- Fix an incorrect filehandle size check in the pNFS flexfiles driver
- Fix several RDMA transport setup/teardown races
- Fix several RDMA queue wrapping issues
- Fix a misplaced memory read barrier in sunrpc's call_decode()
Features:
- Micro optimisation of the TCP transmission queue using TCP_CORK
- statx() performance improvements by further splitting up the
tracking of invalid cached file metadata.
- Support the NFSv4.2 'change_attr_type' attribute and use it to
optimise handling of change attribute updates"
* tag 'nfs-for-5.13-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (85 commits)
xprtrdma: Fix a NULL dereference in frwr_unmap_sync()
sunrpc: Fix misplaced barrier in call_decode
NFSv4.2: Remove ifdef CONFIG_NFSD from NFSv4.2 client SSC code.
xprtrdma: Move fr_mr field to struct rpcrdma_mr
xprtrdma: Move the Work Request union to struct rpcrdma_mr
xprtrdma: Move fr_linv_done field to struct rpcrdma_mr
xprtrdma: Move cqe to struct rpcrdma_mr
xprtrdma: Move fr_cid to struct rpcrdma_mr
xprtrdma: Remove the RPC/RDMA QP event handler
xprtrdma: Don't display r_xprt memory addresses in tracepoints
xprtrdma: Add an rpcrdma_mr_completion_class
xprtrdma: Add tracepoints showing FastReg WRs and remote invalidation
xprtrdma: Avoid Send Queue wrapping
xprtrdma: Do not wake RPC consumer on a failed LocalInv
xprtrdma: Do not recycle MR after FastReg/LocalInv flushes
xprtrdma: Clarify use of barrier in frwr_wc_localinv_done()
xprtrdma: Rename frwr_release_mr()
xprtrdma: rpcrdma_mr_pop() already does list_del_init()
xprtrdma: Delete rpcrdma_recv_buffer_put()
xprtrdma: Fix cwnd update ordering
...
|
|
Pull 9p updates from Dominique Martinet:
"An error handling fix and constification"
* tag '9p-for-5.13-rc1' of git://github.com/martinetd/linux:
fs: 9p: fix v9fs_file_open writeback fid error check
9p: Constify static struct v9fs_attr_group
|