| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- ARM SMMU and Mediatek updates from Will Deacon:
- Support for MT8192 IOMMU from Mediatek
- Arm v7s io-pgtable extensions for MT8192
- Removal of TLBI_ON_MAP quirk
- New Qualcomm compatible strings
- Allow SVA without hardware broadcast TLB maintenance on SMMUv3
- Virtualization Host Extension support for SMMUv3 (SVA)
- Allow SMMUv3 PMU perf driver to be built independently from IOMMU
- Some tidy-up in IOVA and core code
- Conversion of the AMD IOMMU code to use the generic IO-page-table
framework
- Intel VT-d updates from Lu Baolu:
- Audit capability consistency among different IOMMUs
- Add SATC reporting structure support
- Add iotlb_sync_map callback support
- SDHI support for Renesas IOMMU driver
- Misc cleanups and other small improvments
* tag 'iommu-updates-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (94 commits)
iommu/amd: Fix performance counter initialization
MAINTAINERS: repair file pattern in MEDIATEK IOMMU DRIVER
iommu/mediatek: Fix error code in probe()
iommu/mediatek: Fix unsigned domid comparison with less than zero
iommu/vt-d: Parse SATC reporting structure
iommu/vt-d: Add new enum value and structure for SATC
iommu/vt-d: Add iotlb_sync_map callback
iommu/vt-d: Move capability check code to cap_audit files
iommu/vt-d: Audit IOMMU Capabilities and add helper functions
iommu/vt-d: Fix 'physical' typos
iommu: Properly pass gfp_t in _iommu_map() to avoid atomic sleeping
iommu/vt-d: Fix compile error [-Werror=implicit-function-declaration]
driver/perf: Remove ARM_SMMU_V3_PMU dependency on ARM_SMMU_V3
MAINTAINERS: Add entry for MediaTek IOMMU
iommu/mediatek: Add mt8192 support
iommu/mediatek: Remove unnecessary check in attach_device
iommu/mediatek: Support master use iova over 32bit
iommu/mediatek: Add iova reserved function
iommu/mediatek: Support for multi domains
iommu/mediatek: Add get_domain_id from dev->dma_range_map
...
|
|
Pull rdma updates from Jason Gunthorpe:
"This is quite a small cycle, if not for Lee's 70 patches cleaning the
kdocs it would be well below typical for patch count.
Most of the interesting work here was in the HNS and rxe drivers which
got fairly major internal changes.
Summary:
- Driver updates and bug fixes: siw, hns, bnxt_re, mlx5, efa
- Significant rework in rxe to get it ready to have XRC support added
- Several rts bug fixes
- Big series to get to 'make W=1' cleanness, primarily updating kdocs
- Support for creating a RDMA MR from a DMABUF fd to allow PCI peer
to peer transfers to GPU VRAM
- Device disassociation now works properly with umad
- Work to support more than 255 ports on a RDMA device
- Further support for the new HNS HIP09 hardware
- Coding style cleanups: comma to semicolon, unneded semicolon/blank
lines, remove 'h' printk format, don't check for NULL before kfree,
use true/false for bool"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (205 commits)
RDMA/rtrs-srv: Do not pass a valid pointer to PTR_ERR()
RDMA/srp: Fix support for unpopulated and unbalanced NUMA nodes
RDMA/mlx5: Fail QP creation if the device can not support the CQE TS
RDMA/mlx5: Allow CQ creation without attached EQs
RDMA/rtrs-srv-sysfs: fix missing put_device
RDMA/rtrs-srv: fix memory leak by missing kobject free
RDMA/rtrs: Only allow addition of path to an already established session
RDMA/rtrs-srv: Fix stack-out-of-bounds
RDMA/rxe: Remove unused pkt->offset
RDMA/ucma: Fix use-after-free bug in ucma_create_uevent
RDMA/core: Fix kernel doc warnings for ib_port_immutable_read()
RDMA/qedr: Use true and false for bool variable
RDMA/hns: Adjust definition of FRMR fields
RDMA/hns: Refactor process of posting CMDQ
RDMA/hns: Adjust fields and variables about CMDQ tail/head
RDMA/hns: Remove redundant operations on CMDQ
RDMA/hns: Fixes missing error code of CMDQ
RDMA/hns: Remove unused member and variable of CMDQ
RDMA/ipoib: Remove racy Subnet Manager sendonly join checks
RDMA/mlx5: Support 400Gbps IB rate in mlx5 driver
...
|
|
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, ibmvfc,
qla2xxx, hisi_sas, pm80xx) plus the removal of the gdth driver (which
is bound to cause conflicts with a trivial change somewhere).
The only big major rework of note is the one from Hannes trying to
clean up our result handling code in the drivers to make it
consistent"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (194 commits)
scsi: MAINTAINERS: Adjust to reflect gdth scsi driver removal
scsi: ufs: Give clk scaling min gear a value
scsi: lpfc: Fix 'physical' typos
scsi: megaraid_mbox: Fix spelling of 'allocated'
scsi: qla2xxx: Simplify the calculation of variables
scsi: message: fusion: Fix 'physical' typos
scsi: target: core: Change ASCQ for residual write
scsi: target: core: Signal WRITE residuals
scsi: target: core: Set residuals for 4Kn devices
scsi: hisi_sas: Add trace FIFO debugfs support
scsi: hisi_sas: Flush workqueue in hisi_sas_v3_remove()
scsi: hisi_sas: Enable debugfs support by default
scsi: hisi_sas: Don't check .nr_hw_queues in hisi_sas_task_prep()
scsi: hisi_sas: Remove deferred probe check in hisi_sas_v2_probe()
scsi: lpfc: Add auto select on IRQ_POLL
scsi: ncr53c8xx: Fix typos
scsi: lpfc: Fix ancient double free
scsi: qla2xxx: Fix some memory corruption
scsi: qla2xxx: Remove redundant NULL check
scsi: megaraid: Fix ifnullfree.cocci warnings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Fix DM integrity's HMAC support to provide enhanced security of
internal_hash and journal_mac capabilities.
- Various DM writecache fixes to address performance, fix table output
to match what was provided at table creation, fix writing beyond end
of device when shrinking underlying data device, and a couple other
small cleanups.
- Add DM crypt support for using trusted keys.
- Fix deadlock when swapping to DM crypt device by throttling number of
in-flight REQ_SWAP bios. Implemented in DM core so that other
bio-based targets can opt-in by setting ti->limit_swap_bios.
- Fix various inverted logic bugs in the .iterate_devices callout
functions that are used to assess if specific feature or capability
is supported across all devices being combined/stacked by DM.
- Fix DM era target bugs that exposed users to lost writes or memory
leaks.
- Add DM core support for passing through inline crypto support of
underlying devices. Includes block/keyslot-manager changes that
enable extending this support to DM.
- Various small fixes and cleanups (spelling fixes, front padding
calculation cleanup, cleanup conditional zoned support in targets,
etc).
* tag 'for-5.12/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (31 commits)
dm: fix deadlock when swapping to encrypted device
dm: simplify target code conditional on CONFIG_BLK_DEV_ZONED
dm: set DM_TARGET_PASSES_CRYPTO feature for some targets
dm: support key eviction from keyslot managers of underlying devices
dm: add support for passing through inline crypto support
block/keyslot-manager: Introduce functions for device mapper support
block/keyslot-manager: Introduce passthrough keyslot manager
dm era: only resize metadata in preresume
dm era: Use correct value size in equality function of writeset tree
dm era: Fix bitset memory leaks
dm era: Verify the data block size hasn't changed
dm era: Reinitialize bitset cache before digesting a new writeset
dm era: Update in-core bitset after committing the metadata
dm era: Recover committed writeset after crash
dm writecache: use bdev_nr_sectors() instead of open-coded equivalent
dm writecache: fix writing beyond end of underlying device when shrinking
dm table: remove needless request_queue NULL pointer checks
dm table: fix zoned iterate_devices based device capability checks
dm table: fix DAX iterate_devices based device capability checks
dm table: fix iterate_devices based device capability checks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Sync dtc to upstream version v1.6.0-51-g183df9e9c2b9 and build host
fdtoverlay
- Add kbuild support to build DT overlays (%.dtbo)
- Drop NULLifying match table in of_match_device().
In preparation for this, there are several driver cleanups to use
(of_)?device_get_match_data().
- Drop pointless wrappers from DT struct device API
- Convert USB binding schemas to use graph schema and remove old plain
text graph binding doc
- Convert spi-nor and v3d GPU bindings to DT schema
- Tree wide schema fixes for if/then schemas, array size constraints,
and undocumented compatible strings in examples
- Handle 'no-map' correctly for already reserved memblock regions
* tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits)
driver core: platform: Drop of_device_node_put() wrapper
of: Remove of_dev_{get,put}()
dt-bindings: usb: Change descibe to describe in usbmisc-imx.txt
dt-bindings: can: rcar_canfd: Group tuples in pin control properties
dt-bindings: power: renesas,apmu: Group tuples in cpus properties
dt-bindings: mtd: spi-nor: Convert to DT schema format
dt-bindings: Use portable sort for version cmp
dt-bindings: ethernet-controller: fix fixed-link specification
dt-bindings: irqchip: Add node name to PRUSS INTC
dt-bindings: interconnect: Fix the expected number of cells
dt-bindings: Fix errors in 'if' schemas
dt-bindings: iommu: renesas,ipmmu-vmsa: Make 'power-domains' conditionally required
dt-bindings: Fix undocumented compatible strings in examples
kbuild: Add support to build overlays (%.dtbo)
scripts: dtc: Remove the unused fdtdump.c file
scripts: dtc: Build fdtoverlay tool
scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9
scripts: dtc: Fetch fdtoverlay.c from external DTC project
dt-bindings: thermal: sun8i: Fix misplaced schema keyword in compatible strings
dt-bindings: iio: dac: Fix AD5686 references
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"It's been a relatively calm release cycle and we're actually removing
more code than we're adding.
Summary:
- new driver for the Toshiba Visconti platform
- rework of interrupt handling in gpio-tegra
- updates for GPIO selftests: we're now using the character device to
perform the subsystem checks
- support for a new rcar variant + some code refactoring
- refactoring of gpio-ep93xx
- SPDX License identifier has been updated in the uapi header so that
userspace programs bundling it can become fully REUSE-compliant
- improvements to pwm handling in gpio-mvebu
- support for interrupt handling and power management for gpio-xilinx
as well as some code refactoring
- support for a new chip variant in gpio-pca953x
- removal of drivers: zte xs & intel-mid and removal of leftovers
from intel-msic
- impovements to intel drivers pulled from Andy Shevchenko
- improvements to the gpio-aggregator virtual GPIO driver
- and several minor tweaks and fixes to code and documentation all
over the place"
* tag 'gpio-updates-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (71 commits)
gpio: pcf857x: Fix missing first interrupt
gpio: ep93xx: refactor base IRQ number
gpio: ep93xx: refactor ep93xx_gpio_add_bank
gpio: ep93xx: Fix typo s/hierarchial/hierarchical
gpio: ep93xx: drop to_irq binding
gpio: ep93xx: Fix wrong irq numbers in port F
gpio: uapi: use the preferred SPDX license identifier
gpio: gpio-xilinx: Add check if width exceeds 32
gpio: gpio-xilinx: Add support for suspend and resume
gpio: gpio-xilinx: Add interrupt support
gpio: gpio-xilinx: Reduce spinlock array to array
gpio: gpio-xilinx: Simplify with dev_err_probe()
gpio: msic: Drop driver from Makefile
gpio: wcove: Split out to_ireg() helper and deduplicate the code
gpio: wcove: Switch to use regmap_set_bits(), regmap_clear_bits()
gpio: wcove: Get rid of error prone casting in IRQ handler
gpio: intel-mid: Remove driver for deprecated platform
gpio: msic: Remove driver for deprecated platform
gpio: aggregator: Remove trailing comma in terminator entries
gpio: aggregator: Use compound literal from the header
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Many cleanups and a few drivers removal this cycle.
Subsystem:
- Introduce features bitfield and the first feature: RTC_FEATURE_ALARM
Removed drivers:
- ab3100
- coh901331
- tx4939
- sirfsoc
Drivers:
- use rtc_lock and rtc_unlock instead of opencoding
- constify all struct rtc_class_ops
- quiet maybe-unused variable warning
- replace spin_lock_irqsave with spin_lock in hard IRQ
- pcf2127: disable Power-On Reset Override and run OTP refresh"
* tag 'rtc-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (81 commits)
rtc: abx80x: Add utility function for writing configuration key
rtc: pcf2127: properly set flag WD_CD for rtc chips(pcf2129, pca2129)
rtc: pcf8563: Add NXP PCA8565 compatible
rtc: s3c: quiet maybe-unused variable warning
rtc: s3c: stop setting bogus time
rtc: sd3078: quiet maybe-unused variable warning
rtc: s35390a: quiet maybe-unused variable warning
rtc: rx8581: quiet maybe-unused variable warning
rtc: rx8010: quiet maybe-unused variable warning
rtc: rv8803: quiet maybe-unused variable warning
rtc: rv3032: quiet maybe-unused variable warning
rtc: rv3029: quiet maybe-unused variable warning
rtc: rv3028: quiet maybe-unused variable warning
rtc: rs5c372: quiet maybe-unused variable warning
rtc: pcf85363: quiet maybe-unused variable warning
rtc: pcf85063: quiet maybe-unused variable warnings
rtc: meson: quiet maybe-unused variable warning
rtc: m41t80: quiet maybe-unused variable warning
rtc: isl1208: quiet maybe-unused variable warning
rtc: ds3232: quiet maybe-unused variable warning
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c update from Alexandre Belloni:
"Subsystem:
- Handle drivers without probe or remove callback
- Remove callback now returns void
- DT documentation is now in yaml
New driver:
- Silvaco I3C master"
* tag 'i3c/for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: dw: Drop redundant disec call
MAINTAINERS: Add Silvaco I3C master
i3c: master: svc: Add Silvaco I3C master driver
dt-bindings: i3c: Describe Silvaco master binding
dt-bindings: Add vendor prefix for Silvaco
dt-bindings: i3c: mipi-hci: Include the bus binding
dt-bindings: i3c: Convert the bus description to yaml
i3c: Make remove callback return void
i3c: Handle drivers without probe or remove callback
i3c/master/mipi-i3c-hci: Specify HAS_IOMEM dependency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi
Pull HSI update from Sebastian Reichel:
- runtime PM usage counter fix
* tag 'hsi-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: Fix PM usage counter unbalance in ssi_hw_init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Battery/charger driver changes:
- acer_a500: new fuel gauge driver for Acer Iconia Tab A500
- bq256xx: new charger driver
- bq27xxx: Support CHARGE_NOW for bq27z561/bq28z610/bq34z100
- bq27xxx: Fix inverted CURRENT_NOW sign
- cpcap: rework fuel gauge and charger drivers
- ltc4162l: new charger driver
- max8997-charger: add extcon based current limit configuration
- max8903, wm97xx, z2: convert to GPIO descriptors (incl. ARM board files)
- misc cleanup and fixes
Reset drivers:
- new poweroff driver for ATC260x
- at91-sama5d2_shdwc: add support for sama7g5
- drop zte zx driver (SoC support is removed from kernel)"
* tag 'for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (55 commits)
power-supply: use kobj_to_dev()
power: supply: charger-manager: fix typo
power/reset: remove zte zx driver
power: supply: bq25980: Fix repetive bq25975 with bq25960
power: supply: smb347-charger: Fix interrupt usage if interrupt is unavailable
power: supply: axp20x_usb_power: Init work before enabling IRQs
power: supply: fix sbs-charger build, needs REGMAP_I2C
power: supply: bq27xxx: fix polarity of current_now
power: supply: charger-manager: fix incorrect health status
power: reset: at91-sama5d2_shdwc: add support for sama7g5
dt-bindings: atmel-sysreg: add microchip,sama7g5-shdwc
power: reset: at91-sama5d2_shdwc: fix wkupdbc mask
dt-bindings: power/supply: Add ltc4162-l-charger
power: supply: bq24190_charger: convert comma to semicolon
power: supply: ab8500_fg: convert comma to semicolon
power: supply: ds2780: Switch to using the new API kobj_to_dev()
power: supply: bq27xxx: Support CHARGE_NOW for bq27z561/bq28z610/bq34z100
power: supply: cpcap-charger: Fix power_supply_put on null battery pointer
power: supply: cpcap-battery: constify psy_desc
power: supply: cpcap-battery: Fix typo
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This is all driver updates, the majority of which is a bunch of new
Qualcomm clk drivers that dominate the diffstat because we add support
for six SoCs from that particular vendor.
The other big change is the removal of various clk drivers that are no
longer used now that the kernel is dropping support for those SoCs.
Beyond that there's the usual non-critical fixes for existing drivers
and a good number of patches from Lee Jones that cleanup a bunch of
W=1 enabled builds.
Removed Drivers:
- Remove efm32 clk driver
- Remove tango4 clk driver
- Remove zte zx clk driver
- Remove sirf prima2/atlast clk drivers
- Remove u300 clk driver
New Drivers:
- PLL support on MStar/SigmaStar ARMv7 SoCs
- CPU clks for Qualcomm SDX55
- GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs
- GCC clks for Qualcomm SM8350
- GPU clks for Qualcomm SDM660/SDM630
Updates:
- Video clk fixups on Qualcomm SM8250
- Improvements for multimedia clks on Qualcomm MSM8998
- Fix many warnings with W=1 enabled builds under drivers/clk/
- Support crystal load capacitance for Versaclock VC5
- Add a "skip recall" DT binding for Silicon Labs' si570 to avoid
glitches at boot
- Convert Xilinx VCU clk driver to a proper clk provider driver
- Expose Xilinx ZynqMP clk driver to more platforms
- Amlogic pll driver fixup
- Amlogic meson8b clock controller dt support clean up
- Remove mipi clk from the Amlogic axg clock controller
- New Rockchip rk3368 clock ids related to camera input
- Use pr_notice() instead of pr_warn() on i.MX6Q pre-boot ldb_di_clk
reparenting
- A series from Liu Ying that adds some SCU clocks support for
i.MX8qxp DC0/MIPI-LVDS subsystems
- A series from Lucas Stach that adds PLL monitor clocks for i.MX8MQ,
and clkout1/2 support for i.MX8MM/MN
- Add I2c and Ethernet (RAVB) clocks on Renesas R-Car V3U
- Add timer (TMU) clocks on most Renesas R-Car Gen3 SoCs
- Add video-related (FCPVD/VSPD/VSPX), watchdog (RWDT), serial
(HSCIF), pincontrol/GPIO (PFC/GPIO), SPI (MSIOF), SDHI, and DMA
(SYS-DMAC) clocks on Renesas R-Car V3U
- Add support for the USB 2.0 clock selector on Renesas RZ/G2 SoCs
- Allwinner H616 SoC clk support"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (171 commits)
clk: mstar: msc313-mpll: Fix format specifier
clk: mstar: Allow MStar clk drivers to be compile tested
clk: qoriq: use macros to generate pll_mask
clk: qcom: Add Global Clock controller (GCC) driver for SC7280
dt-bindings: clock: Add SC7280 GCC clock binding
clk: qcom: rpmh: Add support for RPMH clocks on SC7280
dt-bindings: clock: Add RPMHCC bindings for SC7280
clk: qcom: gcc-sm8350: add gdsc
dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings
clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver
clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d
clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers
dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc
clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver
clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical
clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical
clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting
clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc
clk: qcom: gdsc: Implement NO_RET_PERIPH flag
clk: mstar: MStar/SigmaStar MPLL driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Use the newly introduced 'hot' and 'critical' ops for the acpi
thermal driver (Daniel Lezcano)
- Remove the notify ops as it is no longer used (Daniel Lezcano)
- Remove the 'forced passive' option and the unused bind/unbind
functions (Daniel Lezcano)
- Remove the THERMAL_TRIPS_NONE and the code cleanup around this macro
(Daniel Lezcano)
- Rework the delays to make them pre-computed instead of computing them
again and again at each polling interval (Daniel Lezcano)
- Remove the pointless 'thermal_zone_device_reset' function (Daniel
Lezcano)
- Use the critical and hot ops to prevent an unexpected system shutdown
on int340x (Kai-Heng Feng)
- Make the cooling device state private to the thermal subsystem
(Daniel Lezcano)
- Prevent to use not-power-aware actor devices with the power allocator
governor (Lukasz Luba)
- Remove 'zx' and 'tango' support along with the corresponding
platforms (Arnd Bergman)
- Fix several issues on the Omap thermal driver (Tony Lindgren)
- Add support for adc-tm5 PMIC thermal monitor for Qcom platforms
(Dmitry Baryshkov)
- Fix an initialization loop in the adc-tm5 (Colin Ian King)
- Fix a return error check in the cpufreq cooling device (Viresh Kumar)
* tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits)
thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on error
thermal: qcom: Fix comparison with uninitialized variable channels_available
thermal: qcom: add support for adc-tm5 PMIC thermal monitor
dt-bindings: thermal: qcom: add adc-thermal monitor bindings
thermal: ti-soc-thermal: Use non-inverted define for omap4
thermal: ti-soc-thermal: Simplify polling with iopoll
thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430
thermal: ti-soc-thermal: Skip pointless register access for dra7
thermal/drivers/zx: Remove zx driver
thermal/drivers/tango: Remove tango driver
thermal: power allocator: fail binding for non-power actor devices
thermal/core: Make cooling device state change private
thermal: intel: pch: Fix unexpected shutdown at critical temperature
thermal: int340x: Fix unexpected shutdown at critical temperature
thermal/core: Remove pointless thermal_zone_device_reset() function
thermal/core: Remove ms based delay fields
thermal/core: Use precomputed jiffies for the polling
thermal/core: Precompute the delays from msecs to jiffies
thermal/core: Remove unused macro THERMAL_TRIPS_NONE
thermal/core: Remove THERMAL_TRIPS_NONE test
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"Lots of changes to the cros_ec_typec driver for 5.12.
A portion of this this set of cros_ec_typec driver's changes was
merged through GregKH's USB tree in order to satisfy cros_ec_typec
driver and typec connector class subsystem dependencies of subsequent
changes.
Summary:
cros_ec_typec:
- Registration of cable plug information
- Support for SOP' plug registration and altmodes
- Support for reporting number of altmodes supported by partners and
plugs
- Send mux configuration ack to EC via a new host command
- Support mux control with no port partner present
- Decouple cable removal from partner removal
cros_ec misc:
- Fix some event masking in cros_ec_proto.
- Gwendal reworked cros_ec's top and bottom half for consistency in
ishtp and rpmsg
- Constify static attribute_group structs"
* tag 'tag-chrome-platform-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_typec: Flush pending work
platform/chrome: cros_ec_types: Support disconnect events without partners
platform/chrome: cros_ec_typec: Skip port partner check in configure_mux()
platform/chrome: cros_ec_typec: Decouple partner removal
platform/chrome: cros_ec: Call interrupt bottom half at probe time
platform/chrome: cros_ec: Call interrupt bottom half in ISH or RPMSG mode
platform/chrome: cros_ec_sysfs: Add cold-ap-off to sysfs reboot.
platform/chrome: cros_ec_commands: Add host command to keep AP off after EC reset.
platform/chrome: Constify static attribute_group structs
platform/chrome: cros_ec_proto: Add LID and BATTERY to default mask
platform/chrome: cros_ec_proto: Use EC_HOST_EVENT_MASK not BIT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks:
- Standardise MFD_CELL_* helpers
New Drivers:
- Add support for Acer Iconia Tab A500 Embedded Controller
New Device Support:
- Add support for ROHM BD9574MWF to BD9571MWV
- Add support for Intel Alder Lake PCH-P PCI to LPSS
- Add support for Intel Alder Lake PCH-S PCI to LPSS
New Functionality:
- Support ACPI enumeration; arizona
Fix-ups:
- Managed resources; bd9571mwv
- DT additions/fix-ups; bd9571mwv, iqs62x, max8997, gateworks-gsc, ene-kb930
- Convert to SPDX; bd9571mw
- Fix return values/error handling; sunxi
- Provide SOFTDEP; arizona
- Make use of DIV_ROUND_UP; mcp-sa11x0
- Use generic APIs; arizona
- Add MAC address sysfs entries; intel-m10-bmc
- Trivial: Coding-style fix-ups; iqs62x
- Trivial: Remove superflouous code; iqs62x
- Clear-up naming conventions; iqs62x
Bug Fixes:
- Fix 'pointer from integer' error; altera-sysmgr
- Convert SGI_MFD_IOC3 from tristate to bool; Kconfig
- Fix interrupt handling; gateworks-gsc
- Extend required delay; iqs62x
- Do not use I2C polling during calibration; iqs62x
- Do no adjust clock frequency during calibration; iqs62x
- Fix use-after-free; wm831x-auxad"
* tag 'mfd-next-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (32 commits)
mfd: wm831x-auxadc: Prevent use after free in wm831x_auxadc_read_irq()
mfd: iqs62x: Do not change clock frequency during ATI
mfd: iqs62x: Do not poll during ATI
mfd: iqs62x: Increase interrupt handler return delay
mfd: iqs62x: Rename regmap_config struct
mfd: iqs62x: Remove unused bit mask
mfd: iqs62x: Remove superfluous whitespace above fallthroughs
mfd: intel-lpss: Add Intel Alder Lake PCH-S PCI IDs
mfd: intel-m10-bmc: Expose MAC address and count
mfd: Add driver for Embedded Controller found on Acer Iconia Tab A500
dt-bindings: mfd: Add ENE KB930 Embedded Controller binding
dt-bindings: mfd: gateworks-gsc: Add fan-tach mode
mfd: intel-lpss: Add Intel Alder Lake PCH-P PCI IDs
mfd: gateworks-gsc: Fix interrupt type
mfd: Standardise MFD_CELL_* helper names
mfd: mcp-sa11x0: Use DIV_ROUND_UP to calculate rw_timeout
mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell
dt-bindings: mfd: Correct the node name of the panel LED
mfd: sgi-ioc3: Turn Kconfig option into a bool
mfd: altera-sysmgr: Fix physical address storing more
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Functionality:
- Convert to GPIO descriptors
Fix-ups:
- Trivial: fix coding style in sky81452-backlight
- Ensure backlight state is known on bring-up in ktd253
- Use common platform API in qcom-wled and fbdev"
* tag 'backlight-next-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight/video: Use Platform getter/setter functions
backlight: ktd253: Bring up in a known state
backlight: sky81452-backlight: Convert comma to semicolon
backlight: lms283gf05: Convert to GPIO descriptors
|
|
Pull auxdisplay updates from Miguel Ojeda:
"A set of auxdisplay fixes and improvements from Geert Uytterhoeven,
and one from Robin van der Gracht that got lost a long time ago"
* tag 'auxdisplay-for-linus-v5.12' of git://github.com/ojeda/linux:
auxdisplay: Fix duplicate CHARLCD config symbol
auxdisplay: ht16k33: Fix refresh rate handling
dt-bindings: auxdisplay: ht16k33: Convert to json-schema
dt-bindings: auxdisplay: ht16k33: Fix default-brightness-level range
dt-bindings: auxdisplay: ht16k33: Keyscan function should be optional
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The main focus of this release from a framework point of view has been
spi-mem where we've acquired support for a few new hardware features
which enable better performance on suitable hardware.
Otherwise mostly thanks to Arnd's cleanup efforts on old platforms
we've removed several obsolete drivers which just about balance out
the newer drivers we've added this cycle.
Summary:
- Allow drivers to flag if they are unidirectional.
- Support for DTR mode and hardware acceleration of dummy cycles in
spi-mem.
- Support for Allwinder H616, Intel Lightning Mountain, nVidia Tegra
QuadSPI, Realtek RTL838x and RTL839x.
- Removal of obsolete EFM32, Txx9 and SIRF Prima and Atlas drivers"
* tag 'spi-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (76 commits)
spi: Skip zero-length transfers in spi_transfer_one_message()
spi: dw: Avoid stack content exposure
spi: cadence-quadspi: Use spi_mem_dtr_supports_op()
spi: spi-mem: add spi_mem_dtr_supports_op()
spi: atmel-quadspi: Disable the QSPI IP at suspend()
spi: pxa2xx: Add IDs for the controllers found on Intel Lynxpoint
spi: pxa2xx: Fix the controller numbering for Wildcat Point
spi: Change provied to provided in the file spi.h
spi: mediatek: add set_cs_timing support
spi: support CS timing for HW & SW mode
spi: add power control when set_cs_timing
spi: stm32: make spurious and overrun interrupts visible
spi: stm32h7: replace private SPI_1HZ_NS with NSEC_PER_SEC
spi: stm32: defer probe for reset
spi: stm32: driver uses reset controller only at init
spi: stm32h7: ensure message are smaller than max size
spi: stm32: use bitfield macros
spi: stm32: do not mandate cs_gpio
spi: stm32: properly handle 0 byte transfer
spi: clps711xx: remove redundant white-space
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Quite an active release for driver specific updates but very little
going on at the subsystem level this time for the regulator API.
Summary:
- Overhaul of the Qualcomm LABIBB driver.
- Allow use of regulator_sync_voltage() on coupled regulators.
- Support for Action ATC260x, Mediatek DVSRC and MT6315, Qualcomm
PCM8180/c and PM8009-1 and Richtek RT4831
- Removal of the AB3100 driver"
* tag 'regulator-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (49 commits)
regulator: bd718x7, bd71828, Fix dvs voltage levels
regulator: pca9450: Add sd-vsel GPIO
regulator: pca9450: Enable system reset on WDOG_B assertion
regulator: pca9450: Add SD_VSEL GPIO for LDO5
regulator: qcom-rpmh: fix pm8009 ldo7
regulator: mt6315: Add support for MT6315 regulator
regulator: document binding for MT6315 regulator
regulator: dt-bindings: Document charger-supply for max8997
regulator: qcom-labibb: Use disable_irq_nosync from isr
regulator: pf8x00: Fix typo for PF8200 chip name
regulator: pf8x00: set ramp_delay for bucks
regulator: core: Avoid debugfs: Directory ... already present! error
regulator: pf8x00: Add suspend support
regulator: Make regulator_sync_voltage() usable by coupled regulators
regulator: s5m8767: Drop regulators OF node reference
regulator: qcom-rpmh: Add pmc8180 and pmc8180c
regulator: qcom-rpmh: Add pmc8180 and pmc8180c
regulator: s5m8767: Fix reference count leak
regulator: remove ab3100 driver
regulator: axp20x: Fix reference cout leak
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap update from Mark Brown:
"Just one simple code style improvement this time, no features.
There is an addition to add a new SoundWire regmap type but that
should be coming via the SoundWire tree as the support for the
underlying bus features was only added this cycle"
* tag 'regmap-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Assign boolean values to a bool variable
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
"New drivers:
- Intel Keembay Soc
New chip versions:
- sun4i: Add H616 compatible string
- mt8192 wdt support
- more Rockchip compatibles to snps,dw-wdt.yaml
- binding for Qcom SDX55
- r8a779a0 (V3U) support
Removed drivers:
- sirf prima watchdog driver
- sirf atlas watchdog driver
- zte zx watchdog driver
- tango watchdog driver
- coh901 watchdog driver
And several fixes and clean-ups"
* tag 'linux-watchdog-5.12-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits)
watchdog: qcom: Remove incorrect usage of QCOM_WDT_ENABLE_IRQ
watchdog: mei_wdt: request stop on unregister
dt-bindings: watchdog: Add binding for Qcom SDX55
watchdog: remove coh901 driver
watchdog: remove tango driver
watchdog: remove zte zx driver
watchdog: remove sirf atlas driver
watchdog: remove sirf prima driver
watchdog: mt8192: add wdt support
dt-binding: mt8192: add toprgu reset-controller head file
dt-binding: mediatek: mt8192: update mtk-wdt document
dt-binding: mediatek: watchdog: fix the description of compatible
dt-binding: watchdog: add more Rockchip compatibles to snps,dw-wdt.yaml
dt-bindings: watchdog: sun4i: Add H616 compatible string
watchdog: mtk_wdt: Remove mtk_wdt_stop() in probe() to prevent the system freeze and it doesn't reboot by watchdog problem
watchdog: renesas_wdt: add grace period before rebooting
watchdog: stop wdd when watchdog hw running in reboot_notifier
watchdog: ziirave_wdt: remove unused including <linux/version.h>
dt-bindings: watchdog: renesas,wdt: add r8a779a0 (V3U) support
watchdog: renesas_wdt: don't sleep in atomic context
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add support for eMMC inline encryption
- Add a helper function to parse DT properties for clock phases
- Some improvements and cleanups for the mmc_test module
MMC host:
- android-goldfish: Remove driver
- cqhci: Add support for eMMC inline encryption
- dw_mmc-zx: Remove driver
- meson-gx: Extend support for scatter-gather to allow SD_IO_RW_EXTENDED
- mmci: Add support for probing bus voltage level translator
- mtk-sd: Address race condition for request timeouts
- sdhci_am654: Add Support for the variant on TI's AM64 SoC
- sdhci-esdhc-imx: Prevent kernel panic at ->remove()
- sdhci-iproc: Add ACPI bindings for the RPi to enable SD and WiFi on RPi4
- sdhci-msm: Add Inline Crypto Engine support
- sdhci-msm: Use actual_clock to improve timeout calculations
- sdhci-of-aspeed: Add Andrew Jeffery as maintainer
- sdhci-of-aspeed: Extend clock support for the AST2600 variant
- sdhci-pci-gli: Increase idle period for low power state for GL9763E
- sdhci-pci-o2micro: Make tuning for SDR104 HW more robust
- sdhci-sirf: Remove driver
- sdhci-xenon: Add support for the AP807 variant
- sunxi-mmc: Add support for the A100 variant
- sunxi-mmc: Ensure host is suspended during system sleep
- tmio: Add detection of data timeout errors
- tmio/renesas_sdhi: Extend support for retuning
- renesas_sdhi_internal_dmac: Add support for the ->pre|post_req() ops"
* tag 'mmc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits)
mmc: sdhci-esdhc-imx: fix kernel panic when remove module
mmc: host: Retire MMC_GOLDFISH
mmc: cb710: Use new tasklet API
mmc: sdhci-pci-o2micro: Bug fix for SDR104 HW tuning failure
mmc: mmc_test: use erase_arg for mmc_erase command
mmc: wbsd: Use new tasklet API
mmc: via-sdmmc: Use new tasklet API
mmc: uniphier-sd: Use new tasklet API
mmc: tifm_sd: Use new tasklet API
mmc: s3cmci: Use new tasklet API
mmc: omap: Use new tasklet API
mmc: dw_mmc: Use new tasklet API
mmc: au1xmmc: Use new tasklet API
mmc: atmel-mci: Use new tasklet API
mmc: cavium: Replace spin_lock_irqsave with spin_lock in hard IRQ
mmc: queue: Remove unused define
mmc: core: Drop redundant bouncesz from struct mmc_card
mmc: core: Drop redundant member in struct mmc host
mmc: core: Use host instead of card argument to mmc_spi_send_csd()
mmc: core: Exclude unnecessary header file
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- mostly driver updates. Bigger ones for mlxcpld and iproc. But most of
them are all over the place.
- removal of the efm32, sirf, u300, and zte zx bus drivers because of
platform removal. So, we have a pleasant diffstat this time.
- first set of cleanups in the I2C core as preparation to increase
maximum length of SMBus transfers to 255 (as specified in the new
standard). Better documentation of struct i2c_msg and its flags stand
out here.
- the testunit can now respond to SMBus block process calls which is
the testcase when implementing the above new maximum length.
* 'i2c/for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (62 commits)
i2c: remove redundant error print in stm32f7_i2c_probe
i2c: testunit: add support for block process calls
i2c: busses: Replace spin_lock_irqsave with spin_lock in hard IRQ
dt-bindings: eeprom: at24: Document ROHM BR24G01
i2c: i801: Add support for Intel Alder Lake PCH-P
i2c: mv64xxx: Fix check for missing clock after adding RPM
i2c: mux: mlxcpld: Add callback to notify mux creation completion
i2c: mux: mlxcpld: Extend supported mux number
i2c: mux: mlxcpld: Extend driver to support word address space devices
i2c: mux: mlxcpld: Get rid of adapter numbers enforcement
i2c: mux: mlxcpld: Prepare mux selection infrastructure for two-byte support
i2c: mux: mlxcpld: Convert driver to platform driver
i2c: imx: Synthesize end of transaction events without idle interrupts
i2c: i2c-qcom-geni: Add shutdown callback for i2c
i2c: mv64xxx: Add runtime PM support
i2c: amd-mp2: Remove unused macro
i2c: amd-mp2: convert to PCI logging functions
i2c: mux: mlxcpld: Move header file out of x86 realm
platform/x86: mlxcpld: Update module license
i2c: mux: mlxcpld: Update module license
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Texas Instruments TPS23861 driver
- AHT10 Temperature and Humidity Sensor Driver
Support for new chips/variants to existing drivers:
- Add AMD family 19h model 30h x86 match to amd_energy driver
- Add Zen3 Ryzen Desktop CPUs support to k10temp driver
- Add support for MAX16508 to max16601 driver
- Support revision "B" of max31785
- Add support for ASRock boards to nct6683 driver
Driver removals:
- Decomission abx500 driver
Various other minor fixes and improvements"
* tag 'hwmon-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (30 commits)
MAINTAINERS: Add entry for Texas Instruments TPS23861 PoE PSE
hwmon: add Texas Instruments TPS23861 driver
dt-bindings: hwmon: Add TI TPS23861 bindings
hwmon: (da9052) Switch to using the new API kobj_to_dev()
hwmon: (amd_energy) Add AMD family 19h model 30h x86 match
hwmon: (pmbus/max31785) Support revision "B"
hwmon: (pmbus/lm25066) Remove unnecessary pmbus_clear_cache function call
hwmon: (pmbus) Clear sensor data after chip write
hwmon: (pmbus/max16601) Add support for MAX16508
hwmon: (pmbus/max16601) Determine and use number of populated phases
hwmon: (pmbus) Simplify the calculation of variables
hwmon: (aht10) Unlock on error in aht10_read_values()
hwmon: (pwm-fan) stop using legacy PWM functions and some cleanups
hwmon: Add AHT10 Temperature and Humidity Sensor Driver
hwmon: (applesmc) Assign boolean values to a bool variable
hwmon: (nct6683) Support ASRock boards
hwmon: (aspeed-pwm-tacho) Switch to using the new API kobj_to_dev()
hwmon: (max6650) Switch to using the new API kobj_to_dev()
hwmon: (pwm-fan) Support multiple fan tachometers
hwmon: (pwm-fan) Store tach data separately
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- Microsoft Surface devices System Aggregator Module support
- SW_TABLET_MODE reporting improvements
- thinkpad_acpi keyboard language setting support
- platform / DPTF profile settings support:
- Base / userspace API parts merged from Rafael's acpi-platform
branch
- thinkpad_acpi and ideapad-laptop support through pdx86
- Remove support for some obsolete Intel MID platforms through
merging of the shared intel-mid-removal branch
- Big cleanup of the ideapad-laptop driver
- Misc other fixes / new hw support / quirks"
* tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (99 commits)
platform/x86: intel_scu_ipc: Increase virtual timeout from 3 to 5 seconds
platform/surface: aggregator: Fix access of unaligned value
tools/power/x86/intel-speed-select: Update version to 1.8
tools/power/x86/intel-speed-select: Add new command to get/set TRL
tools/power/x86/intel-speed-select: Add new command turbo-mode
Platform: OLPC: Constify static struct regulator_ops
platform/surface: Add Surface Hot-Plug driver
platform/x86: intel_scu_wdt: Drop mistakenly added const
platform/x86: Kconfig: add missing selects for ideapad-laptop
platform/x86: acer-wmi: Don't use ACPI_EXCEPTION()
platform/x86: thinkpad_acpi: Replace ifdef CONFIG_ACPI_PLATFORM_PROFILE with depends on
platform/x86: thinkpad_acpi: Fix 'warning: no previous prototype for' warnings
platform/x86: msi-wmi: Fix variable 'status' set but not used compiler warning
platform/surface: surface3-wmi: Fix variable 'status' set but not used compiler warning
platform/x86: Move all dell drivers to their own subdirectory
Documentation/ABI: sysfs-platform-ideapad-laptop: conservation_mode attribute
Documentation/ABI: sysfs-platform-ideapad-laptop: update device attribute paths
platform/x86: ideapad-laptop: add "always on USB charging" control support
platform/x86: ideapad-laptop: add keyboard backlight control support
platform/x86: ideapad-laptop: send notification about touchpad state change to sysfs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Restrict crypto_cipher to internal API users only.
Algorithms:
- Add x86 aesni acceleration for cts.
- Improve x86 aesni acceleration for xts.
- Remove x86 acceleration of some uncommon algorithms.
- Remove RIPE-MD, Tiger and Salsa20.
- Remove tnepres.
- Add ARM acceleration for BLAKE2s and BLAKE2b.
Drivers:
- Add Keem Bay OCS HCU driver.
- Add Marvell OcteonTX2 CPT PF driver.
- Remove PicoXcell driver.
- Remove mediatek driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (154 commits)
hwrng: timeriomem - Use device-managed registration API
crypto: hisilicon/qm - fix printing format issue
crypto: hisilicon/qm - do not reset hardware when CE happens
crypto: hisilicon/qm - update irqflag
crypto: hisilicon/qm - fix the value of 'QM_SQC_VFT_BASE_MASK_V2'
crypto: hisilicon/qm - fix request missing error
crypto: hisilicon/qm - removing driver after reset
crypto: octeontx2 - fix -Wpointer-bool-conversion warning
crypto: hisilicon/hpre - enable Elliptic curve cryptography
crypto: hisilicon - PASID fixed on Kunpeng 930
crypto: hisilicon/qm - fix use of 'dma_map_single'
crypto: hisilicon/hpre - tiny fix
crypto: hisilicon/hpre - adapt the number of clusters
crypto: cpt - remove casting dma_alloc_coherent
crypto: keembay-ocs-aes - Fix 'q' assignment during CCM B0 generation
crypto: xor - Fix typo of optimization
hwrng: optee - Use device-managed registration API
crypto: arm64/crc-t10dif - move NEON yield to C code
crypto: arm64/aes-ce-mac - simplify NEON yield
crypto: arm64/aes-neonbs - remove NEON yield calls
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"New features:
- Cr50 I2C TPM driver
- sysfs exports of PCR registers in TPM 2.0 chips
Bug fixes:
- bug fixes for tpm_tis driver, which had a racy wait for hardware
state change to be ready to send a command to the TPM chip. The bug
has existed already since 2006, but has only made itself known in
recent past. This is the same as the "last time" :-)
- Otherwise there's bunch of fixes for not as alarming regressions. I
think the list is about the same as last time, except I added fixes
for some disjoint bugs in trusted keys that I found some time ago"
* tag 'tpmdd-next-v5.12-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
KEYS: trusted: Reserve TPM for seal and unseal operations
KEYS: trusted: Fix migratable=1 failing
KEYS: trusted: Fix incorrect handling of tpm_get_random()
tpm/ppi: Constify static struct attribute_group
ABI: add sysfs description for tpm exports of PCR registers
tpm: add sysfs exports for all banks of PCR registers
keys: Update comment for restrict_link_by_key_or_keyring_chain
tpm: Remove tpm_dev_wq_lock
char: tpm: add i2c driver for cr50
tpm: Fix fall-through warnings for Clang
tpm_tis: Clean up locality release
tpm_tis: Fix check_locality for correct locality acquisition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
"Two small seccomp updates.
This contains a fix for a build failure that went unnoticed for many
years, and a memory barrier correction:
- Fix a non-FILTER build failure for some architectures (Paul
Cercueil)
- Improve performance with correct memory barrier (wanghongzhe)"
* tag 'seccomp-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: Improve performace by optimizing rmb()
seccomp: Add missing return in non-void function
|
|
Pull smack updates from Casey Schaufler:
"Bounds checking for writes to smackfs interfaces"
* tag 'Smack-for-v5.12' of git://github.com/cschaufler/smack-next:
smackfs: restrict bytes count in smackfs write functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull IMA updates from Mimi Zohar:
"New is IMA support for measuring kernel critical data, as per usual
based on policy. The first example measures the in memory SELinux
policy. The second example measures the kernel version.
In addition are four bug fixes to address memory leaks and a missing
'static' function declaration"
* tag 'integrity-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
integrity: Make function integrity_add_key() static
ima: Free IMA measurement buffer after kexec syscall
ima: Free IMA measurement buffer on error
IMA: Measure kernel version in early boot
selinux: include a consumer of the new IMA critical data hook
IMA: define a builtin critical data measurement policy
IMA: extend critical data hook to limit the measurement based on a label
IMA: limit critical data measurement based on a label
IMA: add policy rule to measure critical data
IMA: define a hook to measure kernel integrity critical data
IMA: add support to measure buffer data hash
IMA: generalize keyring specific measurement constructs
evm: Fix memleak in init_desc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Three very trivial patches for audit this time"
* tag 'audit-pr-20210215' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: Make audit_filter_syscall() return void
audit: Remove leftover reference to the audit_tasklet
kernel/audit: convert comma to semicolon
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"We've got a good handful of patches for SELinux this time around; with
everything passing the selinux-testsuite and applying cleanly to your
tree as of a few minutes ago. The highlights are:
- Add support for labeling anonymous inodes, and extend this new
support to userfaultfd.
- Fallback to SELinux genfs file labeling if the filesystem does not
have xattr support. This is useful for virtiofs which can vary in
its xattr support depending on the backing filesystem.
- Classify and handle MPTCP the same as TCP in SELinux.
- Ensure consistent behavior between inode_getxattr and
inode_listsecurity when the SELinux policy is not loaded. This
fixes a known problem with overlayfs.
- A couple of patches to prune some unused variables from the SELinux
code, mark private variables as static, and mark other variables as
__ro_after_init or __read_mostly"
* tag 'selinux-pr-20210215' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
fs: anon_inodes: rephrase to appropriate kernel-doc
userfaultfd: use secure anon inodes for userfaultfd
selinux: teach SELinux about anonymous inodes
fs: add LSM-supporting anon-inode interface
security: add inode_init_security_anon() LSM hook
selinux: fall back to SECURITY_FS_USE_GENFS if no xattr support
selinux: mark selinux_xfrm_refcount as __read_mostly
selinux: mark some global variables __ro_after_init
selinux: make selinuxfs_mount static
selinux: drop the unnecessary aurule_callback variable
selinux: remove unused global variables
selinux: fix inconsistency between inode_getxattr and inode_listsecurity
selinux: handle MPTCP consistently with TCP
|
|
Pull tomoyo updates from Tetsuo Handa:
"Detect kernel thread correctly, and ignore harmless data race"
* tag 'tomoyo-pr-20210215' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1:
tomoyo: recognize kernel threads correctly
tomoyo: ignore data race while checking quota
|
|
Pull drm updates from Dave Airlie:
"A pretty normal tree, lots of refactoring across the board, ttm, i915,
nouveau, and bunch of features in various drivers.
docs:
- lots of updated docs
core:
- require crtc to have unique primary plane
- fourcc macro fix
- PCI bar quirk for bar resizing
- don't sent hotplug on error
- move vm code to legacy
- nuke hose only used on old oboslete alpha
dma-buf:
- kernel doc updates
- improved lock tracking
dp/hdmi:
- DP-HDMI2.1 protocol converter support
ttm:
- bo size handling cleanup
- release a pinned bo warning
- cleanup lru handler
- avoid using pages with drm_prime_sg_to_page_addr_arrays
cma-helper:
- prime/mmap fixes
bridge:
- add DP support
gma500:
- remove gma3600 support
i915:
- try eDP fast/narrow link again with fallback
- Intel eDP backlight control
- replace display register read/write macros
- refactor intel_display.c
- display power improvements
- HPD code cleanup
- Rocketlake display fixes
- Power/backlight/RPM fixes
- DG1 display fix
- IVB/BYT clear residuals security fix again
- make i915 mitigations options via parameter
- HSW GT1 GPU hangs fixes
- DG1 workaround hang fixes
- TGL DMAR hang avoidance
- Lots of GT fixes
- follow on fixes for residuals clear
- gen7 per-engine-reset support
- HDCP2.2 + HDCP1.4 GEN12 DP MST support
- TGL clear color support
- backlight refactoring
- VRR/Adaptive sync enabling on DP/EDP for TGL+
- async flips for all ilk+
amdgpu:
- rework IH ring handling (Vega/Navi)
- rework HDP handling (Vega/Navi)
- swSMU updates for renoir/vangogh
- Sienna Cichild overdrive support
- FP16 on DCE8-11 support
- GPU reset on navy flounder/vangogh
- SMU profile fixes for APU
- SR-IOV fixes
- Vangogh SMU fixes
- fan speed control fixes
amdkfd:
- config handling fix
- buffer free fix
- recursive lock warnings fix
nouveau:
- Turing MMU fault recovery fixes
- mDP connectors reporting fix
- audio locking fixes
- rework engines/instances code to support new scheme
tegra:
- VIC newer firmware support
- display/gr2d fixes for older tegra
- pm reference leak fix
mediatek:
- SOC MT8183 support
- decouple sub driver + share mtk mutex driver
radeon:
- PCI resource fix for some platforms
ingenic:
- pm support
- 8-bit delta RGB panels
vmwgfx:
- managed driver helpers
vc4:
- BCM2711 DSI1 support
- converted to atomic helpers
- enable 10/12 bpc outputs
- gem prime mmap helpers
- CEC fix
omap:
- use degamma table
- CTM support
- rework DSI support
imx:
- stack usage fixes
- drm managed support
- imx-tve clock provider leak fix
-
rcar-du:
- default mode fixes
- conversion to managed API
hisilicon:
- use simple encoder
vkms:
- writeback connector support
d3:
- BT2020 support"
* tag 'drm-next-2021-02-19' of git://anongit.freedesktop.org/drm/drm: (1459 commits)
drm/amdgpu: Set reference clock to 100Mhz on Renoir (v2)
drm/radeon: OLAND boards don't have VCE
drm/amdkfd: Fix recursive lock warnings
drm/amd/display: Add FPU wrappers to dcn21_validate_bandwidth()
drm/amd/display: Fix potential integer overflow
drm/amdgpu/display: remove hdcp_srm sysfs on device removal
drm/amdgpu: fix CGTS_TCC_DISABLE register offset on gfx10.3
drm/i915/gt: Correct surface base address for renderclear
drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling
drm/nouveau/top/ga100: initial support
drm/nouveau/top: add ioctrl/nvjpg
drm/nouveau/privring: rename from ibus
drm/nouveau/nvkm: remove nvkm_subdev.index
drm/nouveau/nvkm: determine subdev id/order from layout
drm/nouveau/vic: switch to instanced constructor
drm/nouveau/sw: switch to instanced constructor
drm/nouveau/sec2: switch to instanced constructor
drm/nouveau/sec: switch to instanced constructor
drm/nouveau/pm: switch to instanced constructor
drm/nouveau/nvenc: switch to instanced constructor
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"A relatively calm release at this time, and no massive code changes
are found in the stats, while a wide range of code refactoring and
cleanup have been done.
Note that this update includes the tree-wide trivial changes for
dropping the return value from ISA remove callbacks, too.
Below lists up some highlight:
ALSA Core:
- Support for the software jack injection via debugfs
- Fixes for sync_stop PCM operations
HD-audio and USB-audio:
- A few usual HD-audio device quirks
- Updates for Tegra HD-audio
- More quirks for Pioneer and other USB-audio devices
- Stricter state checks at USB-audio disconnection
ASoC:
- Continued code refactoring, cleanup and fixes in ASoC core API
- A KUnit testsuite for the topology code
- Lots of ASoC Intel driver Realtek codec updates, quirk additions
and fixes
- Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured
nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro
- Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers
Others:
- Drop return value from ISA driver remove callback
- Cleanup with DIV_ROUND_UP() macro
- FireWire updates, HDSP output loopback support"
* tag 'sound-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (322 commits)
ALSA: hda: intel-dsp-config: add Alder Lake support
ASoC: soc-pcm: fix hw param limits calculation for multi-DAI
ASoC: Intel: bytcr_rt5640: Add quirk for the Acer One S1002 tablet
ASoC: Intel: bytcr_rt5651: Add quirk for the Jumper EZpad 7 tablet
ASoC: Intel: bytcr_rt5640: Add quirk for the Voyo Winpad A15 tablet
ASoC: Intel: bytcr_rt5640: Add quirk for the Estar Beauty HD MID 7316R tablet
ASoC: soc-pcm: fix hwparams min/max init for dpcm
ALSA: hda/realtek: Quirk for HP Spectre x360 14 amp setup
ALSA: usb-audio: Add implicit fb quirk for BOSS GP-10
ALSA: hda: Add another CometLake-H PCI ID
ASoC: soc-pcm: add soc_pcm_hw_update_format()
ASoC: soc-pcm: add soc_pcm_hw_update_chan()
ASoC: soc-pcm: add soc_pcm_hw_update_rate()
ASoC: wm_adsp: Remove unused control callback structure
ASoC: SOF: relax ABI checks and avoid unnecessary warnings
ASoC: codecs: lpass-tx-macro: add dapm widgets and route
ASoC: codecs: lpass-tx-macro: add support for lpass tx macro
ASoC: qcom: dt-bindings: add bindings for lpass tx macro codec
ASoC: codecs: lpass-rx-macro: add iir widgets
ASoC: codecs: lpass-rx-macro: add dapm widgets and route
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- some core fixes in VB2 mem2mem support
- some improvements and cleanups in V4L2 async kAPI
- newer controls in V4L2 API for H-264 and HEVC codecs
- allegro-dvt driver was promoted from staging
- new i2c sendor drivers: imx334, ov5648, ov8865
- new automobile camera module: rdacm21
- ipu3 cio2 driver started gained support for some ACPI BIOSes
- new ATSC frontend: MaxLinear mxl692 VSB tuner/demod
- the SMIA/CCS driver gained more support for CSS standard
- several driver fixes, updates and improvements
* tag 'media/v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (362 commits)
media: v4l: async: Fix kerneldoc documentation for async functions
media: i2c: max9271: Add MODULE_* macros
media: i2c: Kconfig: Make MAX9271 a module
media: imx334: 'ret' is uninitialized, should have been PTR_ERR()
media: i2c: Add imx334 camera sensor driver
media: dt-bindings: media: Add bindings for imx334
media: ov8856: Configure sensor for GRBG Bayer for all modes
media: i2c: imx219: Implement V4L2_CID_LINK_FREQ control
media: ov5675: fix vflip/hflip control
media: ipu3-cio2: Build bridge only if ACPI is enabled
media: Remove the legacy v4l2-clk API
media: ov6650: Use the generic clock framework
media: mt9m111: Use the generic clock framework
media: ov9640: Use the generic clock framework
media: pxa_camera: Drop the v4l2-clk clock register
media: mach-pxa: Register the camera sensor fixed-rate clock
media: i2c: imx258: get clock from device properties and enable it via runtime PM
media: i2c: imx258: simplify getting state container
media: i2c: imx258: add support for binding via device tree
media: dt-bindings: media: imx258: add bindings for IMX258 sensor
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull JFFS2/UBIFS and UBI updates from Richard Weinberger:
"JFFS2:
- Fix for use-after-free in jffs2_sum_write_data()
- Fix for out-of-bounds access in jffs2_zlib_compress()
UBI:
- Remove dead/useless code
UBIFS:
- Fix for a memory leak in ubifs_init_authentication()
- Fix for high stack usage
- Fix for a off-by-one error in xattrs code"
* tag 'for-linus-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubifs: Fix error return code in alloc_wbufs()
jffs2: check the validity of dstlen in jffs2_zlib_compress()
ubifs: Fix off-by-one error
ubifs: replay: Fix high stack usage, again
ubifs: Fix memleak in ubifs_init_authentication
jffs2: fix use after free in jffs2_sum_write_data()
ubi: eba: Delete useless kfree code
ubi: remove dead code in validate_vid_hdr()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Richard Weinberger:
"MTD core changes:
- Initial support for BCM4908 partitions
Raw NAND controller drivers:
- Intel: Fix an error handling path in 'ebu_dma_start()'
- Tango: Remove the driver
- Marvell: Convert comma to semicolon
- MXC: Convert comma to semicolon
- Qcom: Add support for Qcom SMEM parser
Related MTD changes:
- parsers: Add Qcom SMEM parser
SPI NOR core changes:
- Add non-uniform erase fixes.
- Add Global Block Unlock command. It is defined by few flash
vendors, and it is used for now just by sst.
SPI NOR controller drivers changes:
- intel-spi: Add support for Intel Alder Lake-P SPI serial flash.
- hisi-sfc: Put child node np on error path"
* tag 'mtd/for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (23 commits)
dt-bindings: mtd: add binding for BCM4908 partitions
dt-bindings: mtd: move partition binding to its own file
mtd: spi-nor: sst: Add support for Global Unlock on sst26vf
mtd: spi-nor: Add Global Block Unlock command
mtd: spi-nor: core: Add erase size check for erase command initialization
mtd: spi-nor: core: Fix erase type discovery for overlaid region
mtd: spi-nor: sfdp: Fix last erase region marking
mtd: spi-nor: sfdp: Fix wrong erase type bitmask for overlaid region
mtd: rawnand: intel: Fix an error handling path in 'ebu_dma_start()'
mtd: rawnand: tango: Remove the driver
mtd: rawnand: marvell: convert comma to semicolon
mtd: st_spi_fsm: convert comma to semicolon
mtd: convert comma to semicolon
mtd: parsers: afs: Fix freeing the part name memory in failure
mtd: parser: imagetag: fix error codes in bcm963xx_parse_imagetag_partitions()
mtd: phram: use div_u64_rem to stop overwrite len in phram_setup
mtd: remove redundant assignment to pointer eb
mtd: spi-nor: hisi-sfc: Put child node np on error path
mtd: spi-nor: intel-spi: Add support for Intel Alder Lake-P SPI serial flash
mtd: rawnand: qcom: Add support for Qcom SMEM parser
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- Many cleanups and fixes for our virtio code
- Add support for a pseudo RTC
- Fix for a possible jailbreak
- Minor fixes (spelling, header files)
* tag 'for-linux-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: irq.h: include <asm-generic/irq.h>
um: io.h: include <linux/types.h>
um: add a pseudo RTC
um: remove process stub VMA
um: rework userspace stubs to not hard-code stub location
um: separate child and parent errors in clone stub
um: defer killing userspace on page table update failures
um: mm: check more comprehensively for stub changes
um: print register names in wait_for_stub
um: hostfs: use a kmem cache for inodes
mm: Remove arch_remap() and mm-arch-hooks.h
um: fix spelling mistake in Kconfig "privleges" -> "privileges"
um: virtio: allow devices to be configured for wakeup
um: time-travel: rework interrupt handling in ext mode
um: virtio: disable VQs during suspend
um: virtio: fix handling of messages without payload
um: virtio: clean up a comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Convert to using the generic entry infrastructure.
- Add vdso time namespace support.
- Switch s390 and alpha to 64-bit ino_t. As discussed at
https://lore.kernel.org/linux-mm/YCV7QiyoweJwvN+m@osiris/
- Get rid of expensive stck (store clock) usages where possible.
Utilize cpu alternatives to patch stckf when supported.
- Make tod_clock usage less error prone by converting it to a union and
rework code which is using it.
- Machine check handler fixes and cleanups.
- Drop couple of minor inline asm optimizations to fix clang build.
- Default configs changes notably to make libvirt happy.
- Various changes to rework and improve qdio code.
- Other small various fixes and improvements all over the code.
* tag 's390-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (68 commits)
s390/qdio: remove 'merge_pending' mechanism
s390/qdio: improve handling of PENDING buffers for QEBSM devices
s390/qdio: rework q->qdio_error indication
s390/qdio: inline qdio_kick_handler()
s390/time: remove get_tod_clock_ext()
s390/crypto: use store_tod_clock_ext()
s390/hypfs: use store_tod_clock_ext()
s390/debug: use union tod_clock
s390/kvm: use union tod_clock
s390/vdso: use union tod_clock
s390/time: convert tod_clock_base to union
s390/time: introduce new store_tod_clock_ext()
s390/time: rename store_tod_clock_ext() and use union tod_clock
s390/time: introduce union tod_clock
s390,alpha: switch to 64-bit ino_t
s390: split cleanup_sie
s390: use r13 in cleanup_sie as temp register
s390: fix kernel asce loading when sie is interrupted
s390: add stack for machine check handler
s390: use WRITE_ONCE when re-allocating async stack
...
|
|
Pull KVM updates from Paolo Bonzini:
"x86:
- Support for userspace to emulate Xen hypercalls
- Raise the maximum number of user memslots
- Scalability improvements for the new MMU.
Instead of the complex "fast page fault" logic that is used in
mmu.c, tdp_mmu.c uses an rwlock so that page faults are concurrent,
but the code that can run against page faults is limited. Right now
only page faults take the lock for reading; in the future this will
be extended to some cases of page table destruction. I hope to
switch the default MMU around 5.12-rc3 (some testing was delayed
due to Chinese New Year).
- Cleanups for MAXPHYADDR checks
- Use static calls for vendor-specific callbacks
- On AMD, use VMLOAD/VMSAVE to save and restore host state
- Stop using deprecated jump label APIs
- Workaround for AMD erratum that made nested virtualization
unreliable
- Support for LBR emulation in the guest
- Support for communicating bus lock vmexits to userspace
- Add support for SEV attestation command
- Miscellaneous cleanups
PPC:
- Support for second data watchpoint on POWER10
- Remove some complex workarounds for buggy early versions of POWER9
- Guest entry/exit fixes
ARM64:
- Make the nVHE EL2 object relocatable
- Cleanups for concurrent translation faults hitting the same page
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Simplification of the early init hypercall handling
Non-KVM changes (with acks):
- Detection of contended rwlocks (implemented only for qrwlocks,
because KVM only needs it for x86)
- Allow __DISABLE_EXPORTS from assembly code
- Provide a saner follow_pfn replacements for modules"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (192 commits)
KVM: x86/xen: Explicitly pad struct compat_vcpu_info to 64 bytes
KVM: selftests: Don't bother mapping GVA for Xen shinfo test
KVM: selftests: Fix hex vs. decimal snafu in Xen test
KVM: selftests: Fix size of memslots created by Xen tests
KVM: selftests: Ignore recently added Xen tests' build output
KVM: selftests: Add missing header file needed by xAPIC IPI tests
KVM: selftests: Add operand to vmsave/vmload/vmrun in svm.c
KVM: SVM: Make symbol 'svm_gp_erratum_intercept' static
locking/arch: Move qrwlock.h include after qspinlock.h
KVM: PPC: Book3S HV: Fix host radix SLB optimisation with hash guests
KVM: PPC: Book3S HV: Ensure radix guest has no SLB entries
KVM: PPC: Don't always report hash MMU capability for P9 < DD2.2
KVM: PPC: Book3S HV: Save and restore FSCR in the P9 path
KVM: PPC: remove unneeded semicolon
KVM: PPC: Book3S HV: Use POWER9 SLBIA IH=6 variant to clear SLB
KVM: PPC: Book3S HV: No need to clear radix host SLB before loading HPT guest
KVM: PPC: Book3S HV: Fix radix guest SLB side channel
KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host without mixed mode support
KVM: PPC: Book3S HV: Introduce new capability for 2nd DAWR
KVM: PPC: Book3S HV: Add infrastructure to support 2nd DAWR
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Wei Liu:
- VMBus hardening patches from Andrea Parri and Andres Beltran.
- Patches to make Linux boot as the root partition on Microsoft
Hypervisor from Wei Liu.
- One patch to add a new sysfs interface to support hibernation on
Hyper-V from Dexuan Cui.
- Two miscellaneous clean-up patches from Colin and Gustavo.
* tag 'hyperv-next-signed-20210216' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (31 commits)
Revert "Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer"
iommu/hyperv: setup an IO-APIC IRQ remapping domain for root partition
x86/hyperv: implement an MSI domain for root partition
asm-generic/hyperv: import data structures for mapping device interrupts
asm-generic/hyperv: introduce hv_device_id and auxiliary structures
asm-generic/hyperv: update hv_interrupt_entry
asm-generic/hyperv: update hv_msi_entry
x86/hyperv: implement and use hv_smp_prepare_cpus
x86/hyperv: provide a bunch of helper functions
ACPI / NUMA: add a stub function for node_to_pxm()
x86/hyperv: handling hypercall page setup for root
x86/hyperv: extract partition ID from Microsoft Hypervisor if necessary
x86/hyperv: allocate output arg pages if required
clocksource/hyperv: use MSR-based access if running as root
Drivers: hv: vmbus: skip VMBus initialization if Linux is root
x86/hyperv: detect if Linux is the root partition
asm-generic/hyperv: change HV_CPU_POWER_MANAGEMENT to HV_CPU_MANAGEMENT
hv: hyperv.h: Replace one-element array with flexible-array in struct icmsg_negotiate
hv_netvsc: Restrict configurations on isolated guests
Drivers: hv: vmbus: Enforce 'VMBus version >= 5.2' on isolated guests
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
- Optimize parisc page table locks by using the existing
page_table_lock
- Export argv0-preserve flag in binfmt_misc for usage in qemu-user
- Fix interrupt table (IVT) checksum so firmware will call crash
handler (HPMC)
- Increase IRQ stack to 64kb on 64-bit kernel
- Switch to common devmem_is_allowed() implementation
- Minor fix to get_whan()
* 'parisc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
binfmt_misc: pass binfmt_misc flags to the interpreter
parisc: Optimize per-pagetable spinlocks
parisc: Replace test_ti_thread_flag() with test_tsk_thread_flag()
parisc: Bump 64-bit IRQ stack size to 64 KB
parisc: Fix IVT checksum calculation wrt HPMC
parisc: Use the generic devmem_is_allowed()
parisc: Drop out of get_whan() if task is running again
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- added support for Nintendo N64
- added support for Realtek RTL83XX SoCs
- kaslr support for Loongson64
- first steps to get rid of set_fs()
- DMA runtime coherent/non-coherent selection cleanup
- cleanups and fixes
* tag 'mips_5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (98 commits)
Revert "MIPS: Add basic support for ptrace single step"
vmlinux.lds.h: catch more UBSAN symbols into .data
MIPS: kernel: Drop kgdb_call_nmi_hook
MAINTAINERS: Add git tree for KVM/mips
MIPS: Use common way to parse elfcorehdr
MIPS: Simplify EVA cache handling
Revert "MIPS: kernel: {ftrace,kgdb}: Set correct address limit for cache flushes"
MIPS: remove CONFIG_DMA_PERDEV_COHERENT
MIPS: remove CONFIG_DMA_MAYBE_COHERENT
driver core: lift dma_default_coherent into common code
MIPS: refactor the runtime coherent vs noncoherent DMA indicators
MIPS/alchemy: factor out the DMA coherent setup
MIPS/malta: simplify plat_setup_iocoherency
MIPS: Add basic support for ptrace single step
MAINTAINERS: replace non-matching patterns for loongson{2,3}
MIPS: Make check condition for SDBBP consistent with EJTAG spec
mips: Replace lkml.org links with lore
Revert "MIPS: microMIPS: Fix the judgment of mm_jr16_op and mm_jalr_op"
MIPS: crash_dump.c: Simplify copy_oldmem_page()
Revert "mips: Manually call fdt_init_reserved_mem() method"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- fix ADB autopoll regression
- defconfig updates
* tag 'm68k-for-v5.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
macintosh/adb-iop: Use big-endian autopoll mask
m68k: defconfig: Update defconfigs for v5.11-rc1
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
- vDSO build improvements including support for building with BSD.
- Cleanup to the AMU support code and initialisation rework to support
cpufreq drivers built as modules.
- Removal of synthetic frame record from exception stack when entering
the kernel from EL0.
- Add support for the TRNG firmware call introduced by Arm spec
DEN0098.
- Cleanup and refactoring across the board.
- Avoid calling arch_get_random_seed_long() from
add_interrupt_randomness()
- Perf and PMU updates including support for Cortex-A78 and the v8.3
SPE extensions.
- Significant steps along the road to leaving the MMU enabled during
kexec relocation.
- Faultaround changes to initialise prefaulted PTEs as 'old' when
hardware access-flag updates are supported, which drastically
improves vmscan performance.
- CPU errata updates for Cortex-A76 (#1463225) and Cortex-A55
(#1024718)
- Preparatory work for yielding the vector unit at a finer granularity
in the crypto code, which in turn will one day allow us to defer
softirq processing when it is in use.
- Support for overriding CPU ID register fields on the command-line.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (85 commits)
drivers/perf: Replace spin_lock_irqsave to spin_lock
mm: filemap: Fix microblaze build failure with 'mmu_defconfig'
arm64: Make CPU_BIG_ENDIAN depend on ld.bfd or ld.lld 13.0.0+
arm64: cpufeatures: Allow disabling of Pointer Auth from the command-line
arm64: Defer enabling pointer authentication on boot core
arm64: cpufeatures: Allow disabling of BTI from the command-line
arm64: Move "nokaslr" over to the early cpufeature infrastructure
KVM: arm64: Document HVC_VHE_RESTART stub hypercall
arm64: Make kvm-arm.mode={nvhe, protected} an alias of id_aa64mmfr1.vh=0
arm64: Add an aliasing facility for the idreg override
arm64: Honor VHE being disabled from the command-line
arm64: Allow ID_AA64MMFR1_EL1.VH to be overridden from the command line
arm64: cpufeature: Add an early command-line cpufeature override facility
arm64: Extract early FDT mapping from kaslr_early_init()
arm64: cpufeature: Use IDreg override in __read_sysreg_by_encoding()
arm64: cpufeature: Add global feature override facility
arm64: Move SCTLR_EL1 initialisation to EL-agnostic code
arm64: Simplify init_el2_state to be non-VHE only
arm64: Move VHE-specific SPE setup to mutate_to_vhe()
arm64: Drop early setting of MDSCR_EL2.TPMS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
"A series of Xen related security fixes, all related to limited error
handling in Xen backend drivers"
* tag 'for-linus-5.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-blkback: fix error handling in xen_blkbk_map()
xen-scsiback: don't "handle" error by BUG()
xen-netback: don't "handle" error by BUG()
xen-blkback: don't "handle" error by BUG()
xen/arm: don't ignore return errors from set_phys_to_machine
Xen/gntdev: correct error checking in gntdev_map_grant_pages()
Xen/gntdev: correct dev_bus_addr handling in gntdev_map_grant_pages()
Xen/x86: also check kernel mapping in set_foreign_p2m_mapping()
Xen/x86: don't bail early from clear_foreign_p2m_mapping()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance event updates from Ingo Molnar:
- Add CPU-PMU support for Intel Sapphire Rapids CPUs
- Extend the perf ABI with PERF_SAMPLE_WEIGHT_STRUCT, to offer
two-parameter sampling event feedback. Not used yet, but is intended
for Golden Cove CPU-PMU, which can provide both the instruction
latency and the cache latency information for memory profiling
events.
- Remove experimental, default-disabled perfmon-v4 counter_freezing
support that could only be enabled via a boot option. The hardware is
hopelessly broken, we'd like to make sure nobody starts relying on
this, as it would only end in tears.
- Fix energy/power events on Intel SPR platforms
- Simplify the uprobes resume_execution() logic
- Misc smaller fixes.
* tag 'perf-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/rapl: Fix psys-energy event on Intel SPR platform
perf/x86/rapl: Only check lower 32bits for RAPL energy counters
perf/x86/rapl: Add msr mask support
perf/x86/kvm: Add Cascade Lake Xeon steppings to isolation_ucodes[]
perf/x86/intel: Support CPUID 10.ECX to disable fixed counters
perf/x86/intel: Add perf core PMU support for Sapphire Rapids
perf/x86/intel: Filter unsupported Topdown metrics event
perf/x86/intel: Factor out intel_update_topdown_event()
perf/core: Add PERF_SAMPLE_WEIGHT_STRUCT
perf/intel: Remove Perfmon-v4 counter_freezing support
x86/perf: Use static_call for x86_pmu.guest_get_msrs
perf/x86/intel/uncore: With > 8 nodes, get pci bus die id from NUMA info
perf/x86/intel/uncore: Store the logical die id instead of the physical die id.
x86/kprobes: Do not decode opcode in resume_execution()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core scheduler updates:
- Add CONFIG_PREEMPT_DYNAMIC: this in its current form adds the
preempt=none/voluntary/full boot options (default: full), to allow
distros to build a PREEMPT kernel but fall back to close to
PREEMPT_VOLUNTARY (or PREEMPT_NONE) runtime scheduling behavior via
a boot time selection.
There's also the /debug/sched_debug switch to do this runtime.
This feature is implemented via runtime patching (a new variant of
static calls).
The scope of the runtime patching can be best reviewed by looking
at the sched_dynamic_update() function in kernel/sched/core.c.
( Note that the dynamic none/voluntary mode isn't 100% identical,
for example preempt-RCU is available in all cases, plus the
preempt count is maintained in all models, which has runtime
overhead even with the code patching. )
The PREEMPT_VOLUNTARY/PREEMPT_NONE models, used by the vast
majority of distributions, are supposed to be unaffected.
- Fix ignored rescheduling after rcu_eqs_enter(). This is a bug that
was found via rcutorture triggering a hang. The bug is that
rcu_idle_enter() may wake up a NOCB kthread, but this happens after
the last generic need_resched() check. Some cpuidle drivers fix it
by chance but many others don't.
In true 2020 fashion the original bug fix has grown into a 5-patch
scheduler/RCU fix series plus another 16 RCU patches to address the
underlying issue of missed preemption events. These are the initial
fixes that should fix current incarnations of the bug.
- Clean up rbtree usage in the scheduler, by providing & using the
following consistent set of rbtree APIs:
partial-order; less() based:
- rb_add(): add a new entry to the rbtree
- rb_add_cached(): like rb_add(), but for a rb_root_cached
total-order; cmp() based:
- rb_find(): find an entry in an rbtree
- rb_find_add(): find an entry, and add if not found
- rb_find_first(): find the first (leftmost) matching entry
- rb_next_match(): continue from rb_find_first()
- rb_for_each(): iterate a sub-tree using the previous two
- Improve the SMP/NUMA load-balancer: scan for an idle sibling in a
single pass. This is a 4-commit series where each commit improves
one aspect of the idle sibling scan logic.
- Improve the cpufreq cooling driver by getting the effective CPU
utilization metrics from the scheduler
- Improve the fair scheduler's active load-balancing logic by
reducing the number of active LB attempts & lengthen the
load-balancing interval. This improves stress-ng mmapfork
performance.
- Fix CFS's estimated utilization (util_est) calculation bug that can
result in too high utilization values
Misc updates & fixes:
- Fix the HRTICK reprogramming & optimization feature
- Fix SCHED_SOFTIRQ raising race & warning in the CPU offlining code
- Reduce dl_add_task_root_domain() overhead
- Fix uprobes refcount bug
- Process pending softirqs in flush_smp_call_function_from_idle()
- Clean up task priority related defines, remove *USER_*PRIO and
USER_PRIO()
- Simplify the sched_init_numa() deduplication sort
- Documentation updates
- Fix EAS bug in update_misfit_status(), which degraded the quality
of energy-balancing
- Smaller cleanups"
* tag 'sched-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
sched,x86: Allow !PREEMPT_DYNAMIC
entry/kvm: Explicitly flush pending rcuog wakeup before last rescheduling point
entry: Explicitly flush pending rcuog wakeup before last rescheduling point
rcu/nocb: Trigger self-IPI on late deferred wake up before user resume
rcu/nocb: Perform deferred wake up before last idle's need_resched() check
rcu: Pull deferred rcuog wake up to rcu_eqs_enter() callers
sched/features: Distinguish between NORMAL and DEADLINE hrtick
sched/features: Fix hrtick reprogramming
sched/deadline: Reduce rq lock contention in dl_add_task_root_domain()
uprobes: (Re)add missing get_uprobe() in __find_uprobe()
smp: Process pending softirqs in flush_smp_call_function_from_idle()
sched: Harden PREEMPT_DYNAMIC
static_call: Allow module use without exposing static_call_key
sched: Add /debug/sched_preempt
preempt/dynamic: Support dynamic preempt with preempt= boot option
preempt/dynamic: Provide irqentry_exit_cond_resched() static call
preempt/dynamic: Provide preempt_schedule[_notrace]() static calls
preempt/dynamic: Provide cond_resched() and might_resched() static calls
preempt: Introduce CONFIG_PREEMPT_DYNAMIC
static_call: Provide DEFINE_STATIC_CALL_RET0()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull tlb gather updates from Ingo Molnar:
"Theses fix MM (soft-)dirty bit management in the procfs code & clean
up the TLB gather API"
* tag 'core-mm-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ldt: Use tlb_gather_mmu_fullmm() when freeing LDT page-tables
tlb: arch: Remove empty __tlb_remove_tlb_entry() stubs
tlb: mmu_gather: Remove start/end arguments from tlb_gather_mmu()
tlb: mmu_gather: Introduce tlb_gather_mmu_fullmm()
tlb: mmu_gather: Remove unused start/end arguments from tlb_finish_mmu()
mm: proc: Invalidate TLB after clearing soft-dirty page state
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Core locking primitives updates:
- Remove mutex_trylock_recursive() from the API - no users left
- Simplify + constify the futex code a bit
Lockdep updates:
- Teach lockdep about local_lock_t
- Add CONFIG_DEBUG_IRQFLAGS=y debug config option to check for
potentially unsafe IRQ mask restoration patterns. (I.e.
calling raw_local_irq_restore() with IRQs enabled.)
- Add wait context self-tests
- Fix graph lock corner case corrupting internal data structures
- Fix noinstr annotations
LKMM updates:
- Simplify the litmus tests
- Documentation fixes
KCSAN updates:
- Re-enable KCSAN instrumentation in lib/random32.c
Misc fixes:
- Don't branch-trace static label APIs
- DocBook fix
- Remove stale leftover empty file"
* tag 'locking-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
checkpatch: Don't check for mutex_trylock_recursive()
locking/mutex: Kill mutex_trylock_recursive()
s390: Use arch_local_irq_{save,restore}() in early boot code
lockdep: Noinstr annotate warn_bogus_irq_restore()
locking/lockdep: Avoid unmatched unlock
locking/rwsem: Remove empty rwsem.h
locking/rtmutex: Add missing kernel-doc markup
futex: Remove unneeded gotos
futex: Change utime parameter to be 'const ... *'
lockdep: report broken irq restoration
jump_label: Do not profile branch annotations
locking: Add Reviewers
locking/selftests: Add local_lock inversion tests
locking/lockdep: Exclude local_lock_t from IRQ inversions
locking/lockdep: Clean up check_redundant() a bit
locking/lockdep: Add a skip() function to __bfs()
locking/lockdep: Mark local_lock_t
locking/selftests: More granular debug_locks_verbose
lockdep/selftest: Add wait context selftests
tools/memory-model: Fix typo in klitmus7 compatibility table
...
|
