summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2021-03-26Merge tag 'amd-drm-fixes-5.12-2021-03-24' of ↵Dave Airlie17-142/+365
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.12-2021-03-24: amdgpu: - S0ix fixes - Add PCI ID - Polaris PCIe DPM fix - Display fix for high refresh rate monitors Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210324210630.3949-1-alexander.deucher@amd.com
2021-03-26Merge branch 'linux-5.12' of git://github.com/skeggsb/linux into drm-fixesDave Airlie1-1/+12
- cursor size fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv7js90N_PYc8JncQA9Hu0yjbg+vPw109FKxJ538nZ=fag@mail.gmail.com
2021-03-26Merge tag 'drm-intel-fixes-2021-03-25-1' of ↵Dave Airlie9-37/+113
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - DisplayPort LTTPR fixes around link training and limiting it according to supported spec version. (Imre) - Fix enabled_planes bitmask to really represent only logically enabled planes (Ville). - Fix DSS CTL registers for ICL DSI transcoders (Jani) - Fix the GT fence revocation runtime PM logic. (Imre) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YFxYdrjqeUtSu+3p@intel.com
2021-03-26Merge tag 'drm-misc-fixes-2021-03-25' of ↵Dave Airlie1-1/+2
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.12: - Use FOLL_FORCE and FOLL_LONGTERM in etnaviv Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/72d4c9ce-6709-4e0f-a715-79fdcebb48e7@linux.intel.com
2021-03-25drm/nouveau/kms/nve4-nv108: Limit cursors to 128x128Lyude Paul1-1/+12
While Kepler does technically support 256x256 cursors, it turns out that Kepler actually has some additional requirements for scanout surfaces that we're not enforcing correctly, which aren't present on Maxwell and later. Cursor surfaces must always use small pages (4K), and overlay surfaces must always use large pages (128K). Fixing this correctly though will take a bit more work: as we'll need to add some code in prepare_fb() to move cursor FBs in large pages to small pages, and vice-versa for overlay FBs. So until we have the time to do that, just limit cursor surfaces to 128x128 - a size small enough to always default to small pages. This means small ovlys are still broken on Kepler, but it is extremely unlikely anyone cares about those anyway :). Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: d3b2f0f7921c ("drm/nouveau/kms/nv50-: Report max cursor size to userspace") Cc: <stable@vger.kernel.org> # v5.11+ Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2021-03-24drm/i915: Fix the GT fence revocation runtime PM logicImre Deak3-6/+41
To optimize some task deferring it until runtime resume unless someone holds a runtime PM reference (because in this case the task can be done w/o the overhead of runtime resume), we have to use the runtime PM get-if-active logic: If the runtime PM usage count is 0 (and so get-if-in-use would return false) the runtime suspend handler is not necessarily called yet (it could be just pending), so the device is not necessarily powered down, and so the runtime resume handler is not guaranteed to be called. The fence revocation depends on the above deferral, so add a get-if-active helper and use it during fence revocation. v2: - Add code comment explaining the fence reg programming deferral logic to i915_vma_revoke_fence(). (Chris) - Add Cc: stable and Fixes: tags. (Chris) - Fix the function docbook comment. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v4.12+ Fixes: 181df2d458f3 ("drm/i915: Take rpm wakelock for releasing the fence on unbind") Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210322204223.919936-1-imre.deak@intel.com (cherry picked from commit 9d58aa46291d4d696bb1eac3436d3118f7bf2573) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-03-24drm/amdgpu/display: restore AUX_DPHY_TX_CONTROL for DCN2.xAlex Deucher1-2/+1
Commit 098214999c8f added fetching of the AUX_DPHY register values from the vbios, but it also changed the default values in the case when there are no values in the vbios. This causes problems with displays with high refresh rates. To fix this, switch back to the original default value for AUX_DPHY_TX_CONTROL. Fixes: 098214999c8f ("drm/amd/display: Read VBIOS Golden Settings Tbl") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1426 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Igor Kravchenko <Igor.Kravchenko@amd.com> Cc: Aric Cyr <Aric.Cyr@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: stable@vger.kernel.org
2021-03-24drm/amdgpu: Add additional Sienna Cichlid PCI IDAlex Deucher1-0/+1
Add new DID. Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-03-23drm/amd/pm: workaround for audio noise issueKenneth Feng4-11/+166
On some Intel platforms, audio noise can be detected due to high pcie speed switch latency. This patch leaverages ppfeaturemask to fix to the highest pcie speed then disable pcie switching. v2: coding style fix Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-03-23drm/i915/dsc: fix DSS CTL register usage for ICL DSI transcodersJani Nikula1-8/+2
Use the correct DSS CTL registers for ICL DSI transcoders. As a side effect, this also brings back the sanity check for trying to use pipe DSC registers on pipe A on ICL. Fixes: 8a029c113b17 ("drm/i915/dp: Modify VDSC helpers to configure DSC for Bigjoiner slave") References: http://lore.kernel.org/r/87eegxq2lq.fsf@intel.com Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: <stable@vger.kernel.org> # v5.11+ Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210319115333.8330-1-jani.nikula@intel.com (cherry picked from commit 5706d02871240fdba7ddd6ab1cc31672fc95a90f) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-03-23drm/i915: Fix enabled_planes bitmaskVille Syrjälä1-2/+3
The enabled_planes bitmask was supposed to track logically enabled planes (ie. fb!=NULL and crtc!=NULL), but instead we end up putting even disabled planes into the bitmask since intel_plane_atomic_check_with_state() only takes the early exit if the plane was disabled and stays disabled. I think I misread the early said codepath to exit whenever the plane is logically disabled, which is not true. So let's fix this up properly and set the bit only when the plane actually is logically enabled. Cc: Manasi Navare <manasi.d.navare@intel.com> Fixes: ee42ec19ca2e ("drm/i915: Track logically enabled planes for hw state") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-2-ville.syrjala@linux.intel.com Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> (cherry picked from commit 97bc7ffa1b1e9a8672e0a8e9a96680b0c3717427) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-03-23drm/i915: Disable LTTPR support when the LTTPR rev < 1.4Imre Deak1-4/+10
By the specification the 0xF0000 - 0xF02FF range is only valid if the LTTPR revision at 0xF0000 is at least 1.4. Disable the LTTPR support otherwise. Fixes: 7b2a4ab8b0ef ("drm/i915: Switch to LTTPR transparent mode link training") Cc: <stable@vger.kernel.org> # v5.11 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210317184901.4029798-4-imre.deak@intel.com (cherry picked from commit 1663ad4936e0679443a315fe342f99636a2420dd) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-03-23drm/i915: Disable LTTPR support when the DPCD rev < 1.4Imre Deak3-15/+39
By the specification the 0xF0000-0xF02FF range is only valid when the DPCD revision is 1.4 or higher. Disable LTTPR support if this isn't so. Trying to detect LTTPRs returned corrupted values for the above DPCD range at least on a Skylake host with an LG 43UD79-B monitor with a DPCD revision 1.2 connected. v2: Add the actual version check. v3: Fix s/DRPX/DPRX/ typo. Fixes: 7b2a4ab8b0ef ("drm/i915: Switch to LTTPR transparent mode link training") Cc: <stable@vger.kernel.org> # v5.11 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210317190149.4032966-1-imre.deak@intel.com (cherry picked from commit 264613b406eb0d74cd9ca582c717c5e2c5a975ea) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-03-23drm/i915/ilk-glk: Fix link training on links with LTTPRsImre Deak2-3/+19
The spec requires to use at least 3.2ms for the AUX timeout period if there are LT-tunable PHY Repeaters on the link (2.11.2). An upcoming spec update makes this more specific, by requiring a 3.2ms minimum timeout period for the LTTPR detection reading the 0xF0000-0xF0007 range (3.6.5.1). Accordingly disable LTTPR detection until GLK, where the maximum timeout we can set is only 1.6ms. Link training in the non-transparent mode is known to fail at least on some SKL systems with a WD19 dock on the link, which exposes an LTTPR (see the References below). While this could have different reasons besides the too short AUX timeout used, not detecting LTTPRs (and so not using the non-transparent LT mode) fixes link training on these systems. While at it add a code comment about the platform specific maximum timeout values. v2: Add a comment about the g4x maximum timeout as well. (Ville) Reported-by: Takashi Iwai <tiwai@suse.de> Reported-and-tested-by: Santiago Zarate <santiago.zarate@suse.com> Reported-and-tested-by: Bodo Graumann <mail@bodograumann.de> References: https://gitlab.freedesktop.org/drm/intel/-/issues/3166 Fixes: b30edfd8d0b4 ("drm/i915: Switch to LTTPR non-transparent mode link training") Cc: <stable@vger.kernel.org> # v5.11 Cc: Takashi Iwai <tiwai@suse.de> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210317184901.4029798-2-imre.deak@intel.com (cherry picked from commit 984982f3ef7b240cd24c2feb2762d81d9d8da3c2) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-03-22drm/amdgpu: skip kfd suspend/resume for S0ixAlex Deucher1-4/+7
GFX is in gfxoff mode during s0ix so we shouldn't need to actually tear anything down and restore it. Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-22drm/amdgpu: drop S0ix checks around CG/PG in suspendAlex Deucher1-4/+2
We handle it properly within the CG/PG functions directly now. Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-22drm/amdgpu: skip CG/PG for gfx during S0ixPratik Vishwakarma1-0/+8
Not needed as the device is in gfxoff state so the CG/PG state is handled just like it would be for gfxoff during runtime gfxoff. This should also prevent delays on resume. Reworked from Pratik's original patch (Alex) Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
2021-03-22drm/amdgpu: update comments about s0ix suspend/resumeAlex Deucher1-3/+7
Provide and explanation as to why we skip GFX and PSP for S0ix. GFX goes into gfxoff, same as runtime, so no need to tear down and re-init. PSP is part of the always on state, so no need to touch it. Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-22drm/amdgpu/swsmu: skip gfx cgpg on s0ix suspendAlex Deucher2-3/+3
The SMU expects CGPG to be enabled when entering S0ix. with this we can re-enable SMU suspend. Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-22drm/amdgpu: re-enable suspend phase 2 for S0ixAlex Deucher1-3/+9
This really needs to be done to properly tear down the device. SMC, PSP, and GFX are still problematic, need to dig deeper into what aspect of them that is problematic. Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-22drm/amdgpu: move s0ix check into amdgpu_device_ip_suspend_phase2 (v3)Alex Deucher1-4/+6
No functional change. v2: use correct dev v3: rework Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-22drm/amdgpu: clean up non-DC suspend/resume handlingAlex Deucher8-89/+139
Move the non-DC specific code into the DCE IP blocks similar to how we handle DC. This cleans up the common suspend and resume pathes. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-22drm/amdgpu: don't evict vram on APUs for suspend to ram (v4)Alex Deucher1-5/+2
Vram is system memory, so no need to evict. v2: use PM_EVENT messages v3: use correct dev v4: use driver flags Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-22drm/amdgpu: rework S3/S4/S0ix state handlingAlex Deucher4-29/+25
Set flags at the top level pmops callbacks to track state. This cleans up the current set of flags and properly handles S4 on S0ix capable systems. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-22drm/amdgpu: fix the hibernation suspend with s0ixPrike Liang1-2/+6
During system hibernation suspend still need un-gate gfx CG/PG firstly to handle HW status check before HW resource destory. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-03-22Merge tag 'du-fixes-20210316' of git://linuxtv.org/pinchartl/media into ↵Dave Airlie1-25/+6
drm-fixes R-Car DU v5.12 fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/YFAG3ZMcWd1qW/Oo@pendragon.ideasonboard.com
2021-03-21Linux 5.12-rc4v5.12-rc4Linus Torvalds1-1/+1
2021-03-21Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds11-72/+168
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Miscellaneous ext4 bug fixes for v5.12" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: initialize ret to suppress smatch warning ext4: stop inode update before return ext4: fix rename whiteout with fast commit ext4: fix timer use-after-free on failed mount ext4: fix potential error in ext4_do_update_inode ext4: do not try to set xattr into ea_inode if value is empty ext4: do not iput inode under running transaction in ext4_rename() ext4: find old entry again if failed to rename whiteout ext4: fix error handling in ext4_end_enable_verity() ext4: fix bh ref count on error paths fs/ext4: fix integer overflow in s_log_groups_per_flex ext4: add reclaim checks to xattr code ext4: shrink race window in ext4_should_retry_alloc()
2021-03-21Merge tag 'io_uring-5.12-2021-03-21' of git://git.kernel.dk/linux-blockLinus Torvalds3-7/+31
Pull io_uring followup fixes from Jens Axboe: - The SIGSTOP change from Eric, so we properly ignore that for PF_IO_WORKER threads. - Disallow sending signals to PF_IO_WORKER threads in general, we're not interested in having them funnel back to the io_uring owning task. - Stable fix from Stefan, ensuring we properly break links for short send/sendmsg recv/recvmsg if MSG_WAITALL is set. - Catch and loop when needing to run task_work before a PF_IO_WORKER threads goes to sleep. * tag 'io_uring-5.12-2021-03-21' of git://git.kernel.dk/linux-block: io_uring: call req_set_fail_links() on short send[msg]()/recv[msg]() with MSG_WAITALL io-wq: ensure task is running before processing task_work signal: don't allow STOP on PF_IO_WORKER threads signal: don't allow sending any signals to PF_IO_WORKER threads
2021-03-21Merge tag 'staging-5.12-rc4' of ↵Linus Torvalds14-48/+75
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver fixes from Greg KH: "Some small staging and IIO driver fixes: - MAINTAINERS changes for the move of the staging mailing list - comedi driver fixes to get request_irq() to work correctly - counter driver fixes for reported issues with iio devices - tiny iio driver fixes for reported issues. All of these have been in linux-next with no reported problems" * tag 'staging-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: vt665x: fix alignment constraints staging: comedi: cb_pcidas64: fix request_irq() warn staging: comedi: cb_pcidas: fix request_irq() warn MAINTAINERS: move the staging subsystem to lists.linux.dev MAINTAINERS: move some real subsystems off of the staging mailing list iio: gyro: mpu3050: Fix error handling in mpu3050_trigger_handler iio: hid-sensor-temperature: Fix issues of timestamp channel iio: hid-sensor-humidity: Fix alignment issue of timestamp channel counter: stm32-timer-cnt: fix ceiling miss-alignment with reload register counter: stm32-timer-cnt: fix ceiling write max value counter: stm32-timer-cnt: Report count function when SLAVE_MODE_DISABLED iio: adc: ab8500-gpadc: Fix off by 10 to 3 iio:adc:stm32-adc: Add HAS_IOMEM dependency iio: adis16400: Fix an error code in adis16400_initial_setup() iio: adc: adi-axi-adc: add proper Kconfig dependencies iio: adc: ad7949: fix wrong ADC result due to incorrect bit mask iio: hid-sensor-prox: Fix scale not correct issue iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel
2021-03-21Merge tag 'usb-5.12-rc4' of ↵Linus Torvalds11-25/+62
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB and Thunderbolt driver fixes from Greg KH: "Here are some small Thunderbolt and USB driver fixes for some reported issues: - thunderbolt fixes for minor problems - typec fixes for power issues - usb-storage quirk addition - usbip bugfix - dwc3 bugfix when stopping transfers - cdnsp bugfix for isoc transfers - gadget use-after-free fix All have been in linux-next this week with no reported issues" * tag 'usb-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: tcpm: Skip sink_cap query only when VDM sm is busy usb: dwc3: gadget: Prevent EP queuing while stopping transfers usb: typec: tcpm: Invoke power_supply_changed for tcpm-source-psy- usb: typec: Remove vdo[3] part of tps6598x_rx_identity_reg struct usb-storage: Add quirk to defeat Kindle's automatic unload usb: gadget: configfs: Fix KASAN use-after-free usbip: Fix incorrect double assignment to udc->ud.tcp_rx usb: cdnsp: Fixes incorrect value in ISOC TRB thunderbolt: Increase runtime PM reference count on DP tunnel discovery thunderbolt: Initialize HopID IDAs in tb_switch_alloc()
2021-03-21Merge tag 'irq-urgent-2021-03-21' of ↵Linus Torvalds2-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Ingo Molnar: "A change to robustify force-threaded IRQ handlers to always disable interrupts, plus a DocBook fix. The force-threaded IRQ handler change has been accelerated from the normal schedule of such a change to keep the bad pattern/workaround of spin_lock_irqsave() in handlers or IRQF_NOTHREAD as a kludge from spreading" * tag 'irq-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Disable interrupts for force threaded handlers genirq/irq_sim: Fix typos in kernel doc (fnode -> fwnode)
2021-03-21Merge tag 'perf-urgent-2021-03-21' of ↵Linus Torvalds2-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Boundary condition fixes for bugs unearthed by the perf fuzzer" * tag 'perf-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Fix unchecked MSR access error caused by VLBR_EVENT perf/x86/intel: Fix a crash caused by zero PEBS status
2021-03-21Merge tag 'locking-urgent-2021-03-21' of ↵Linus Torvalds4-31/+49
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: - Get static calls & modules right. Hopefully. - WW mutex fixes * tag 'locking-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: static_call: Fix static_call_update() sanity check static_call: Align static_call_is_init() patching condition static_call: Fix static_call_set_init() locking/ww_mutex: Fix acquire/release imbalance in ww_acquire_init()/ww_acquire_fini() locking/ww_mutex: Simplify use_ww_ctx & ww_ctx handling
2021-03-21Merge tag 'efi-urgent-2021-03-21' of ↵Linus Torvalds3-3/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: - another missing RT_PROP table related fix, to ensure that the efivarfs pseudo filesystem fails gracefully if variable services are unsupported - use the correct alignment for literal EFI GUIDs - fix a use after unmap issue in the memreserve code * tag 'efi-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: use 32-bit alignment for efi_guid_t literals firmware/efi: Fix a use after bug in efi_mem_reserve_persistent efivars: respect EFI_UNSUPPORTED return from firmware
2021-03-21Merge tag 'x86_urgent_for_v5.12-rc4' of ↵Linus Torvalds12-44/+52
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: "The freshest pile of shiny x86 fixes for 5.12: - Add the arch-specific mapping between physical and logical CPUs to fix devicetree-node lookups - Restore the IRQ2 ignore logic - Fix get_nr_restart_syscall() to return the correct restart syscall number. Split in a 4-patches set to avoid kABI breakage when backporting to dead kernels" * tag 'x86_urgent_for_v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic/of: Fix CPU devicetree-node lookups x86/ioapic: Ignore IRQ2 again x86: Introduce restart_block->arch_data to remove TS_COMPAT_RESTART x86: Introduce TS_COMPAT_RESTART to fix get_nr_restart_syscall() x86: Move TS_COMPAT back to asm/thread_info.h kernel, fs: Introduce and use set_restart_fn() and arch_set_restart_data()
2021-03-21Merge tag 'powerpc-5.12-4' of ↵Linus Torvalds3-10/+19
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix a possible stack corruption and subsequent DLPAR failure in the rpadlpar_io PCI hotplug driver - Two build fixes for uncommon configurations Thanks to Christophe Leroy and Tyrel Datwyler. * tag 'powerpc-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: PCI: rpadlpar: Fix potential drc_name corruption in store functions powerpc: Force inlining of cpu_has_feature() to avoid build failure powerpc/vdso32: Add missing _restgpr_31_x to fix build failure
2021-03-21io_uring: call req_set_fail_links() on short send[msg]()/recv[msg]() with ↵Stefan Metzmacher1-4/+20
MSG_WAITALL Without that it's not safe to use them in a linked combination with others. Now combinations like IORING_OP_SENDMSG followed by IORING_OP_SPLICE should be possible. We already handle short reads and writes for the following opcodes: - IORING_OP_READV - IORING_OP_READ_FIXED - IORING_OP_READ - IORING_OP_WRITEV - IORING_OP_WRITE_FIXED - IORING_OP_WRITE - IORING_OP_SPLICE - IORING_OP_TEE Now we have it for these as well: - IORING_OP_SENDMSG - IORING_OP_SEND - IORING_OP_RECVMSG - IORING_OP_RECV For IORING_OP_RECVMSG we also check for the MSG_TRUNC and MSG_CTRUNC flags in order to call req_set_fail_links(). There might be applications arround depending on the behavior that even short send[msg]()/recv[msg]() retuns continue an IOSQE_IO_LINK chain. It's very unlikely that such applications pass in MSG_WAITALL, which is only defined in 'man 2 recvmsg', but not in 'man 2 sendmsg'. It's expected that the low level sock_sendmsg() call just ignores MSG_WAITALL, as MSG_ZEROCOPY is also ignored without explicitly set SO_ZEROCOPY. We also expect the caller to know about the implicit truncation to MAX_RW_COUNT, which we don't detect. cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/c4e1a4cc0d905314f4d5dc567e65a7b09621aab3.1615908477.git.metze@samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-21io-wq: ensure task is running before processing task_workJens Axboe1-2/+6
Mark the current task as running if we need to run task_work from the io-wq threads as part of work handling. If that is the case, then return as such so that the caller can appropriately loop back and reset if it was part of a going-to-sleep flush. Fixes: 3bfe6106693b ("io-wq: fork worker threads from original task") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-21signal: don't allow STOP on PF_IO_WORKER threadsEric W. Biederman1-1/+2
Just like we don't allow normal signals to IO threads, don't deliver a STOP to a task that has PF_IO_WORKER set. The IO threads don't take signals in general, and have no means of flushing out a stop either. Longer term, we may want to look into allowing stop of these threads, as it relates to eg process freezing. For now, this prevents a spin issue if a SIGSTOP is delivered to the parent task. Reported-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-03-21signal: don't allow sending any signals to PF_IO_WORKER threadsJens Axboe1-0/+3
They don't take signals individually, and even if they share signals with the parent task, don't allow them to be delivered through the worker thread. Linux does allow this kind of behavior for regular threads, but it's really a compatability thing that we need not care about for the IO threads. Reported-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-21ext4: initialize ret to suppress smatch warningTheodore Ts'o1-1/+1
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-03-21ext4: stop inode update before returnPan Bian1-1/+3
The inode update should be stopped before returing the error code. Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210117085732.93788-1-bianpan2016@163.com Fixes: 8016e29f4362 ("ext4: fast commit recovery path") Cc: stable@kernel.org Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-03-21ext4: fix rename whiteout with fast commitHarshad Shirwadkar3-2/+12
This patch adds rename whiteout support in fast commits. Note that the whiteout object that gets created is actually char device. Which imples, the function ext4_inode_journal_mode(struct inode *inode) would return "JOURNAL_DATA" for this inode. This has a consequence in fast commit code that it will make creation of the whiteout object a fast-commit ineligible behavior and thus will fall back to full commits. With this patch, this can be observed by running fast commits with rename whiteout and seeing the stats generated by ext4_fc_stats tracepoint as follows: ext4_fc_stats: dev 254:32 fc ineligible reasons: XATTR:0, CROSS_RENAME:0, JOURNAL_FLAG_CHANGE:0, NO_MEM:0, SWAP_BOOT:0, RESIZE:0, RENAME_DIR:0, FALLOC_RANGE:0, INODE_JOURNAL_DATA:16; num_commits:6, ineligible: 6, numblks: 3 So in short, this patch guarantees that in case of rename whiteout, we fall back to full commits. Amir mentioned that instead of creating a new whiteout object for every rename, we can create a static whiteout object with irrelevant nlink. That will make fast commits to not fall back to full commit. But until this happens, this patch will ensure correctness by falling back to full commits. Fixes: 8016e29f4362 ("ext4: fast commit recovery path") Cc: stable@kernel.org Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20210316221921.1124955-1-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-03-21ext4: fix timer use-after-free on failed mountJan Kara1-1/+1
When filesystem mount fails because of corrupted filesystem we first cancel the s_err_report timer reminding fs errors every day and only then we flush s_error_work. However s_error_work may report another fs error and re-arm timer thus resulting in timer use-after-free. Fix the problem by first flushing the work and only after that canceling the s_err_report timer. Reported-by: syzbot+628472a2aac693ab0fcd@syzkaller.appspotmail.com Fixes: 2d01ddc86606 ("ext4: save error info to sb through journal if available") CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210315165906.2175-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-03-21ext4: fix potential error in ext4_do_update_inodeShijie Luo1-4/+4
If set_large_file = 1 and errors occur in ext4_handle_dirty_metadata(), the error code will be overridden, go to out_brelse to avoid this situation. Signed-off-by: Shijie Luo <luoshijie1@huawei.com> Link: https://lore.kernel.org/r/20210312065051.36314-1-luoshijie1@huawei.com Cc: stable@kernel.org Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-03-21ext4: do not try to set xattr into ea_inode if value is emptyzhangyi (F)1-1/+1
Syzbot report a warning that ext4 may create an empty ea_inode if set an empty extent attribute to a file on the file system which is no free blocks left. WARNING: CPU: 6 PID: 10667 at fs/ext4/xattr.c:1640 ext4_xattr_set_entry+0x10f8/0x1114 fs/ext4/xattr.c:1640 ... Call trace: ext4_xattr_set_entry+0x10f8/0x1114 fs/ext4/xattr.c:1640 ext4_xattr_block_set+0x1d0/0x1b1c fs/ext4/xattr.c:1942 ext4_xattr_set_handle+0x8a0/0xf1c fs/ext4/xattr.c:2390 ext4_xattr_set+0x120/0x1f0 fs/ext4/xattr.c:2491 ext4_xattr_trusted_set+0x48/0x5c fs/ext4/xattr_trusted.c:37 __vfs_setxattr+0x208/0x23c fs/xattr.c:177 ... Now, ext4 try to store extent attribute into an external inode if ext4_xattr_block_set() return -ENOSPC, but for the case of store an empty extent attribute, store the extent entry into the extent attribute block is enough. A simple reproduce below. fallocate test.img -l 1M mkfs.ext4 -F -b 2048 -O ea_inode test.img mount test.img /mnt dd if=/dev/zero of=/mnt/foo bs=2048 count=500 setfattr -n "user.test" /mnt/foo Reported-by: syzbot+98b881fdd8ebf45ab4ae@syzkaller.appspotmail.com Fixes: 9c6e7853c531 ("ext4: reserve space for xattr entries/names") Cc: stable@kernel.org Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20210305120508.298465-1-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-03-21ext4: do not iput inode under running transaction in ext4_rename()zhangyi (F)1-9/+9
In ext4_rename(), when RENAME_WHITEOUT failed to add new entry into directory, it ends up dropping new created whiteout inode under the running transaction. After commit <9b88f9fb0d2> ("ext4: Do not iput inode under running transaction"), we follow the assumptions that evict() does not get called from a transaction context but in ext4_rename() it breaks this suggestion. Although it's not a real problem, better to obey it, so this patch add inode to orphan list and stop transaction before final iput(). Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20210303131703.330415-2-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-03-21ext4: find old entry again if failed to rename whiteoutzhangyi (F)1-2/+27
If we failed to add new entry on rename whiteout, we cannot reset the old->de entry directly, because the old->de could have moved from under us during make indexed dir. So find the old entry again before reset is needed, otherwise it may corrupt the filesystem as below. /dev/sda: Entry '00000001' in ??? (12) has deleted/unused inode 15. CLEARED. /dev/sda: Unattached inode 75 /dev/sda: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. Fixes: 6b4b8e6b4ad ("ext4: fix bug for rename with RENAME_WHITEOUT") Cc: stable@vger.kernel.org Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20210303131703.330415-1-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-03-21genirq: Disable interrupts for force threaded handlersThomas Gleixner1-0/+4
With interrupt force threading all device interrupt handlers are invoked from kernel threads. Contrary to hard interrupt context the invocation only disables bottom halfs, but not interrupts. This was an oversight back then because any code like this will have an issue: thread(irq_A) irq_handler(A) spin_lock(&foo->lock); interrupt(irq_B) irq_handler(B) spin_lock(&foo->lock); This has been triggered with networking (NAPI vs. hrtimers) and console drivers where printk() happens from an interrupt which interrupted the force threaded handler. Now people noticed and started to change the spin_lock() in the handler to spin_lock_irqsave() which affects performance or add IRQF_NOTHREAD to the interrupt request which in turn breaks RT. Fix the root cause and not the symptom and disable interrupts before invoking the force threaded handler which preserves the regular semantics and the usefulness of the interrupt force threading as a general debugging tool. For not RT this is not changing much, except that during the execution of the threaded handler interrupts are delayed until the handler returns. Vs. scheduling and softirq processing there is no difference. For RT kernels there is no issue. Fixes: 8d32a307e4fa ("genirq: Provide forced interrupt threading") Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Johan Hovold <johan@kernel.org> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20210317143859.513307808@linutronix.de
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-30 00:04:06 +0000