summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-09-01RAID/s390: provide raid6 recovery optimizationMartin Schwidefsky4-1/+121
The XC instruction can be used to improve the speed of the raid6 recovery. The loops now operate on blocks of 256 bytes. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-08-29s390/crypto: simplify CPACF encryption / decryption functionsMartin Schwidefsky2-214/+136
The double while loops of the CTR mode encryption / decryption functions are overly complex for little gain. Simplify the functions to a single while loop at the cost of an additional memcpy of a few bytes for every 4K page worth of data. Adapt the other crypto functions to make them all look alike. Reviewed-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-08-29s390/crypto: cpacf function detectionMartin Schwidefsky9-253/+223
The CPACF code makes some assumptions about the availablity of hardware support. E.g. if the machine supports KM(AES-256) without chaining it is assumed that KMC(AES-256) with chaining is available as well. For the existing CPUs this is true but the architecturally correct way is to check each CPACF functions on its own. This is what the query function of each instructions is all about. Reviewed-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-08-29s390/crypto: simplify init / exit functionsMartin Schwidefsky2-98/+79
The aes and the des module register multiple crypto algorithms dependent on the availability of specific CPACF instructions. To simplify the deregistration with crypto_unregister_alg add an array with pointers to the successfully registered algorithms and use it for the error handling in the init function and in the module exit function. Reviewed-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-08-29s390/crypto: simplify return code handlingMartin Schwidefsky6-165/+52
The CPACF instructions can complete with three different condition codes: CC=0 for successful completion, CC=1 if the protected key verification failed, and CC=3 for partial completion. The inline functions will restart the CPACF instruction for partial completion, this removes the CC=3 case. The CC=1 case is only relevant for the protected key functions of the KM, KMC, KMAC and KMCTR instructions. As the protected key functions are not used by the current code, there is no need for any kind of return code handling. Reviewed-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-08-29s390/crypto: cleanup cpacf function codesMartin Schwidefsky3-133/+110
Use a separate define for the decryption modifier bit instead of duplicating the function codes for encryption / decrypton. In addition use an unsigned type for the function code. Reviewed-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-08-29RAID/s390: add SIMD implementation for raid6 gen/xorMartin Schwidefsky6-0/+265
Using vector registers is slightly faster: raid6: vx128x8 gen() 19705 MB/s raid6: vx128x8 xor() 11886 MB/s raid6: using algorithm vx128x8 gen() 19705 MB/s raid6: .... xor() 11886 MB/s, rmw enabled vs the software algorithms: raid6: int64x1 gen() 3018 MB/s raid6: int64x1 xor() 1429 MB/s raid6: int64x2 gen() 4661 MB/s raid6: int64x2 xor() 3143 MB/s raid6: int64x4 gen() 5392 MB/s raid6: int64x4 xor() 3509 MB/s raid6: int64x8 gen() 4441 MB/s raid6: int64x8 xor() 3207 MB/s raid6: using algorithm int64x4 gen() 5392 MB/s raid6: .... xor() 3509 MB/s, rmw enabled Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-08-29s390/nmi: improve revalidation of fpu / vector registersMartin Schwidefsky1-28/+39
The machine check handler will do one of two things if the floating-point control, a floating point register or a vector register can not be revalidated: 1) if the PSW indicates user mode the process is terminated 2) if the PSW indicates kernel mode the system is stopped To unconditionally stop the system for 2) is incorrect. There are three possible outcomes if the floating-point control, a floating point register or a vector registers can not be revalidated: 1) The kernel is inside a kernel_fpu_begin/kernel_fpu_end block and needs the register. The system is stopped. 2) No active kernel_fpu_begin/kernel_fpu_end block and the CIF_CPU bit is not set. The user space process needs the register and is killed. 3) No active kernel_fpu_begin/kernel_fpu_end block and the CIF_FPU bit is set. Neither the kernel nor the user space process needs the lost register. Just revalidate it and continue. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-08-29s390/fpu: improve kernel_fpu_[begin|end]Martin Schwidefsky5-209/+147
In case of nested user of the FPU or vector registers in the kernel the current code uses the mask of the FPU/vector registers of the previous contexts to decide which registers to save and restore. E.g. if the previous context used KERNEL_VXR_V0V7 and the next context wants to use KERNEL_VXR_V24V31 the first 8 vector registers are stored to the FPU state structure. But this is not necessary as the next context does not use these registers. Rework the FPU/vector register save and restore code. The new code does a few things differently: 1) A lowcore field is used instead of a per-cpu variable. 2) The kernel_fpu_end function now has two parameters just like kernel_fpu_begin. The register flags are required by both functions to save / restore the minimal register set. 3) The inline functions kernel_fpu_begin/kernel_fpu_end now do the update of the register masks. If the user space FPU registers have already been stored neither save_fpu_regs nor the __kernel_fpu_begin/__kernel_fpu_end functions have to be called for the first context. In this case kernel_fpu_begin adds 7 instructions and kernel_fpu_end adds 4 instructions. 3) The inline assemblies in __kernel_fpu_begin / __kernel_fpu_end to save / restore the vector registers are simplified a bit. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-08-29s390/vx: allow to include vx-insn.h with .includeMartin Schwidefsky1-34/+28
To make the vx-insn.h more versatile avoid cpp preprocessor macros and allow to use plain numbers for vector and general purpose register operands. With that you can emit an .include from a C file into the assembler text and then use the vx-insn macros in inline assemblies. For example: asm (".include \"asm/vx-insn.h\""); static inline void xor_vec(int x, int y, int z) { asm volatile("VX %0,%1,%2" : : "i" (x), "i" (y), "i" (z)); } Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-08-29s390/time: avoid races when updating tb_update_countDavid Hildenbrand1-5/+0
The increment might not be atomic and we're not holding the timekeeper_lock. Therefore we might lose an update to count, resulting in VDSO being trapped in a loop. As other archs also simply update the values and count doesn't seem to have an impact on reloading of these values in VDSO code, let's just remove the update of tb_update_count. Suggested-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-08-29s390/time: fixup the clock comparator on all cpusDavid Hildenbrand1-0/+1
By leaving fixup_cc unset, only the clock comparator of the cpu actually doing the sync is fixed up until now. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-08-29s390/time: cleanup etr leftoversDavid Hildenbrand1-21/+9
There are still some etr leftovers and wrong comments, let's clean that up. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-08-29s390/time: simplify stp time syncsDavid Hildenbrand1-46/+4
The way we call do_adjtimex() today is broken. It has 0 effect, as ADJ_OFFSET_SINGLESHOT (0x0001) in the kernel maps to !ADJ_ADJTIME (in contrast to user space where it maps to ADJ_OFFSET_SINGLESHOT | ADJ_ADJTIME - 0x8001). !ADJ_ADJTIME will silently ignore all adjustments without STA_PLL being active. We could switch to ADJ_ADJTIME or turn STA_PLL on, but still we would run into some problems: - Even when switching to nanoseconds, we lose accuracy. - Successive calls to do_adjtimex() will simply overwrite any leftovers from the previous call (if not fully handled) - Anything that NTP does using the sysctl heavily interferes with our use. - !ADJ_ADJTIME will silently round stuff > or < than 0.5 seconds Reusing do_adjtimex() here just feels wrong. The whole STP synchronization works right now *somehow* only, as do_adjtimex() does nothing and our TOD clock jumps in time, although it shouldn't. This is especially bad as the clock could jump backwards in time. We will have to find another way to fix this up. As leap seconds are also not properly handled yet, let's just get rid of all this complex logic altogether and use the correct clock_delta for fixing up the clock comparator and keeping the sched_clock monotonic. This change should have 0 effect on the current STP mechanism. Once we know how to best handle sync events and leap second updates, we'll start with a fresh implementation. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-08-26Merge branch 's390forkvm' of ↵Martin Schwidefsky2-4/+25
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux Pull facility mask patch from the KVM tree. * tag 's390forkvm' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux KVM: s390: generate facility mask from readable list
2016-08-25KVM: s390: generate facility mask from readable listHeiko Carstens2-4/+25
Automatically generate the KVM facility mask out of a readable list. Manually changing the masks is very error prone, especially if the special IBM bit numbering has to be considered. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-08-24s390/tape: Use memdup_user() rather than duplicating its implementationMarkus Elfring1-8/+3
Reuse existing functionality from memdup_user() instead of keeping duplicate source code. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-08-24s390/pci: add zpci_report_error interfaceMartin Schwidefsky2-0/+13
The 'report_error' interface for PCI devices found on s390 can be used by a user space program to inject an adapter error notification. Add a new kernel interface zpci_report_error to allow a PCI device driver to inject these error notifications without a detour over user space. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-08-24s390: cio: remove redundant cio_cancel declarationDong Jia Shi1-1/+0
cio_cancel was declared twice. Remove one of them. Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-08-24s390/mm: merge local / non-local IDTE helperMartin Schwidefsky2-37/+17
Merge the __p[m|u]xdp_idte and __p[m|u]dp_idte_local functions into a single __p[m|u]dp_idte function with an additional parameter. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-08-24s390/mm: merge local / non-local IPTE helperMartin Schwidefsky3-23/+19
Merge the __ptep_ipte and __ptep_ipte_local functions into a single __ptep_ipte function with an additional parameter. The __pte_ipte_range function is still extra as the while loops makes it hard to merge. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-08-24s390/mm,kvm: flush gmap address space with IDTEMartin Schwidefsky4-23/+34
The __tlb_flush_mm() helper uses a global flush if the mm struct has a gmap structure attached to it. Replace the global flush with two individual flushes by means of the IDTE instruction if only a single gmap is attached the the mm. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-08-24s390/mm: no local TLB flush for clearing-by-ASCE IDTEMartin Schwidefsky1-35/+9
The local-clearing control of the IDTE instruction does not have any effect for the clearing-by-ASCE operation. Only the invalidation-and-clearing operation respects the local-clearing bit. Remove __tlb_flush_idte_local and simplify the batched TLB flushing code. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-08-23Merge tag 'for-f2fs-v4.8-rc4' of ↵Linus Torvalds5-40/+40
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs fixes from Jaegeuk Kim: - fsmark regression - i_size race condition - wrong conditions in f2fs_move_file_range * tag 'for-f2fs-v4.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: avoid potential deadlock in f2fs_move_file_range f2fs: allow copying file range only in between regular files Revert "f2fs: move i_size_write in f2fs_write_end" Revert "f2fs: use percpu_rw_semaphore"
2016-08-23Merge tag 'usercopy-v4.8-rc4' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardened usercopy fixes from Kees Cook: - avoid signed math problems on unexpected compilers - avoid false positives at very end of kernel text range checks * tag 'usercopy-v4.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: usercopy: fix overlap check for kernel text usercopy: avoid potentially undefined behavior in pointer math
2016-08-23Merge branch 'linus' of ↵Linus Torvalds3-7/+8
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a number of memory corruption bugs in the newly added sha256-mb/sha256-mb code" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: sha512-mb - fix ctx pointer crypto: sha256-mb - fix ctx pointer and digest copy
2016-08-22usercopy: fix overlap check for kernel textJosh Poimboeuf1-1/+1
When running with a local patch which moves the '_stext' symbol to the very beginning of the kernel text area, I got the following panic with CONFIG_HARDENED_USERCOPY: usercopy: kernel memory exposure attempt detected from ffff88103dfff000 (<linear kernel text>) (4096 bytes) ------------[ cut here ]------------ kernel BUG at mm/usercopy.c:79! invalid opcode: 0000 [#1] SMP ... CPU: 0 PID: 4800 Comm: cp Not tainted 4.8.0-rc3.after+ #1 Hardware name: Dell Inc. PowerEdge R720/0X3D66, BIOS 2.5.4 01/22/2016 task: ffff880817444140 task.stack: ffff880816274000 RIP: 0010:[<ffffffff8121c796>] __check_object_size+0x76/0x413 RSP: 0018:ffff880816277c40 EFLAGS: 00010246 RAX: 000000000000006b RBX: ffff88103dfff000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88081f80dfa8 RDI: ffff88081f80dfa8 RBP: ffff880816277c90 R08: 000000000000054c R09: 0000000000000000 R10: 0000000000000005 R11: 0000000000000006 R12: 0000000000001000 R13: ffff88103e000000 R14: ffff88103dffffff R15: 0000000000000001 FS: 00007fb9d1750800(0000) GS:ffff88081f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000021d2000 CR3: 000000081a08f000 CR4: 00000000001406f0 Stack: ffff880816277cc8 0000000000010000 000000043de07000 0000000000000000 0000000000001000 ffff880816277e60 0000000000001000 ffff880816277e28 000000000000c000 0000000000001000 ffff880816277ce8 ffffffff8136c3a6 Call Trace: [<ffffffff8136c3a6>] copy_page_to_iter_iovec+0xa6/0x1c0 [<ffffffff8136e766>] copy_page_to_iter+0x16/0x90 [<ffffffff811970e3>] generic_file_read_iter+0x3e3/0x7c0 [<ffffffffa06a738d>] ? xfs_file_buffered_aio_write+0xad/0x260 [xfs] [<ffffffff816e6262>] ? down_read+0x12/0x40 [<ffffffffa06a61b1>] xfs_file_buffered_aio_read+0x51/0xc0 [xfs] [<ffffffffa06a6692>] xfs_file_read_iter+0x62/0xb0 [xfs] [<ffffffff812224cf>] __vfs_read+0xdf/0x130 [<ffffffff81222c9e>] vfs_read+0x8e/0x140 [<ffffffff81224195>] SyS_read+0x55/0xc0 [<ffffffff81003a47>] do_syscall_64+0x67/0x160 [<ffffffff816e8421>] entry_SYSCALL64_slow_path+0x25/0x25 RIP: 0033:[<00007fb9d0c33c00>] 0x7fb9d0c33c00 RSP: 002b:00007ffc9c262f28 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: fffffffffff8ffff RCX: 00007fb9d0c33c00 RDX: 0000000000010000 RSI: 00000000021c3000 RDI: 0000000000000004 RBP: 00000000021c3000 R08: 0000000000000000 R09: 00007ffc9c264d6c R10: 00007ffc9c262c50 R11: 0000000000000246 R12: 0000000000010000 R13: 00007ffc9c2630b0 R14: 0000000000000004 R15: 0000000000010000 Code: 81 48 0f 44 d0 48 c7 c6 90 4d a3 81 48 c7 c0 bb b3 a2 81 48 0f 44 f0 4d 89 e1 48 89 d9 48 c7 c7 68 16 a3 81 31 c0 e8 f4 57 f7 ff <0f> 0b 48 8d 90 00 40 00 00 48 39 d3 0f 83 22 01 00 00 48 39 c3 RIP [<ffffffff8121c796>] __check_object_size+0x76/0x413 RSP <ffff880816277c40> The checked object's range [ffff88103dfff000, ffff88103e000000) is valid, so there shouldn't have been a BUG. The hardened usercopy code got confused because the range's ending address is the same as the kernel's text starting address at 0xffff88103e000000. The overlap check is slightly off. Fixes: f5509cc18daa ("mm: Hardened usercopy") Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2016-08-22usercopy: avoid potentially undefined behavior in pointer mathEric Biggers1-1/+1
check_bogus_address() checked for pointer overflow using this expression, where 'ptr' has type 'const void *': ptr + n < ptr Since pointer wraparound is undefined behavior, gcc at -O2 by default treats it like the following, which would not behave as intended: (long)n < 0 Fortunately, this doesn't currently happen for kernel code because kernel code is compiled with -fno-strict-overflow. But the expression should be fixed anyway to use well-defined integer arithmetic, since it could be treated differently by different compilers in the future or could be reported by tools checking for undefined behavior. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2016-08-22Merge tag 'arc-4.8-rc4-fixes' of ↵Linus Torvalds9-9/+30
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - support for Syscall ABI v4 with upstream gcc 6.x - lockdep fix (Daniel Mentz) - gdb register clobber (Liav Rehana) - couple of missing exports for modules - other fixes here and there * tag 'arc-4.8-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: export __udivdi3 for modules ARC: mm: fix build breakage with STRICT_MM_TYPECHECKS ARC: export kmap ARC: Support syscall ABI v4 ARC: use correct offset in pt_regs for saving/restoring user mode r25 ARC: Elide redundant setup of DMA callbacks ARC: Call trace_hardirqs_on() before enabling irqs
2016-08-22Merge tag 'gpio-v4.8-2' of ↵Linus Torvalds3-10/+11
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Here are a few GPIO fixes for v4.8. I was expecting some fallout from the new chardev rework but nothing like that turned up att all. Instead a Kconfig confusion that I think I have finally nailed, then some ordinary driver noise and trivia. This fixes a Kconfig issue with UM: when I made GPIOLIB available to all archs, that included UM, but the OF part of GPIOLIB requires HAS_IOMEM, so we add HAS_IOMEM as a dependency to OF_GPIO. This in turn exposed the fact that a few GPIO drivers were implicitly assuming OF_GPIO as their dependency but instead depended on OF alone (the typical problem being a pointer inside gpio_chip not existing unless OF_GPIO is selected) and then UM would fail to compile with these drivers instead. Then I lost patience and made any GPIO driver depending on just OF depend on OF_GPIO instead, that is certainly what they meant and the only thing that makes sense anyway. GPIO with just OF but !OF_GPIO does not make sense. Also a fix for the max730x driver data pointer, and a minor comment fix for the GPIO tools" * tag 'gpio-v4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: make any OF dependent driver depend on OF_GPIO gpio: Fix OF build problem on UM gpio: max730x: set gpiochip data pointer before using it tools/gpio: fix gpio-event-mon header comment
2016-08-21Linux 4.8-rc3v4.8-rc3Linus Torvalds1-1/+1
2016-08-21Merge branch 'parisc-4.8-2' of ↵Linus Torvalds3-22/+2
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull two parisc fixes from Helge Deller: "The first patch ensures that the high-res cr16 clocksource (which was added in kernel 4.7) gets choosen as default clocksource for parisc. The second patch moves the #define of EREFUSED down inside errno.h and thus unbreaks building the gccgo compiler" * 'parisc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix order of EREFUSED define in errno.h parisc: Fix automatic selection of cr16 clocksource
2016-08-21EDAC, skx_edac: Add EDAC driver for SkylakeTony Luck4-0/+1136
This is an entirely new driver instead of yet another set of patches to sb_edac.c because: 1) Mapping from PCI devices to socket/memory controller is significantly different. Skylake scatters devices on a socket across a number of PCI buses. 2) There is an extra level of interleaving via the "mcroute" register that would be a little messy to squeeze into the old driver. 3) Validation is getting too expensive. Changes to sb_edac need to be checked against Sandy Bridge, Ivy Bridge, Haswell, Broadwell and Knights Landing. Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-20parisc: Fix order of EREFUSED define in errno.hHelge Deller1-2/+2
When building gccgo in userspace, errno.h gets parsed and the go include file sysinfo.go is generated. Since EREFUSED is defined to the same value as ECONNREFUSED, and ECONNREFUSED is defined later on in errno.h, this leads to go complaining that EREFUSED isn't defined yet. Fix this trivial problem by moving the define of EREFUSED down after ECONNREFUSED in errno.h (and clean up the indenting while touching this line). Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org
2016-08-20parisc: Fix automatic selection of cr16 clocksourceHelge Deller2-20/+0
Commit 54b66800907 (parisc: Add native high-resolution sched_clock() implementation) added support to use the CPU-internal cr16 counters as reliable clocksource with the help of HAVE_UNSTABLE_SCHED_CLOCK. Sadly the commit missed to remove the hack which prevented cr16 to become the default clocksource even on SMP systems. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 4.7+
2016-08-19ARC: export __udivdi3 for modulesVineet Gupta1-0/+2
Some module using div_u64() was failing to link because the libgcc 64-bit divide assist routine was not being exported for modules Reported-by: avinashp@quantenna.com Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-08-19Make the hardened user-copy code depend on having a hardened allocatorLinus Torvalds1-0/+1
The kernel test robot reported a usercopy failure in the new hardened sanity checks, due to a page-crossing copy of the FPU state into the task structure. This happened because the kernel test robot was testing with SLOB, which doesn't actually do the required book-keeping for slab allocations, and as a result the hardening code didn't realize that the task struct allocation was one single allocation - and the sanity checks fail. Since SLOB doesn't even claim to support hardening (and you really shouldn't use it), the straightforward solution is to just make the usercopy hardening code depend on the allocator supporting it. Reported-by: kernel test robot <xiaolong.ye@intel.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-19Merge branch 'i2c/for-current' of ↵Linus Torvalds8-22/+34
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "I2C has some pretty standard driver bugfixes and one minor cleanup" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: meson: Use complete() instead of complete_all() i2c: brcmstb: Use complete() instead of complete_all() i2c: bcm-kona: Use complete() instead of complete_all() i2c: bcm-iproc: Use complete() instead of complete_all() i2c: at91: fix support of the "alternative command" feature i2c: ocores: add missed clk_disable_unprepare() on failure paths i2c: cros-ec-tunnel: Fix usage of cros_ec_cmd_xfer() i2c: mux: demux-pinctrl: properly roll back when adding adapter fails
2016-08-19ARC: mm: fix build breakage with STRICT_MM_TYPECHECKSVineet Gupta1-1/+1
| CC mm/memory.o | In file included from ../mm/memory.c:53:0: | ../include/linux/pfn_t.h: In function ‘pfn_t_pte’: | ../include/linux/pfn_t.h:78:2: error: conversion to non-scalar type requested | return pfn_pte(pfn_t_to_pfn(pfn), pgprot); With STRICT_MM_TYPECHECKS pte_t is a struct and the offending code forces a cast which ends up shifting a struct and hence the gcc warning. Note that in recent past some of the arches (aarch64, s390) made STRICT_MM_TYPECHECKS default, but we don't for ARC as this leads to slightly worse generated code, given ARC ABI definition of returning structs (which pte_t would become) Quoting from ARC ABI... "Results of type struct are returned in a caller-supplied temporary variable whose address is passed in r0. For such functions, the arguments are shifted so that they are passed in r1 and up." So - struct to be returned would be allocated on stack requiring extra code at call sites - callee updates stack memory to facilitate the return (vs. simple MOV into return reg r0) Hence STRICT_MM_TYPECHECKS is not enabled by default for ARC Cc: <stable@vger.kernel.org> #4.4+ Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-08-19ARC: export kmapVineet Gupta1-0/+1
| MODPOST 7 modules | ERROR: "kmap" [fs/ext2/ext2.ko] undefined! | ../scripts/Makefile.modpost:91: recipe for target '__modpost' failed Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-08-19ARC: Support syscall ABI v4Vineet Gupta3-5/+14
The syscall ABI includes the gcc functional calling ABI since a syscall implies userland caller and kernel callee. The current gcc ABI (v3) for ARCv2 ISA required 64-bit data be passed in even-odd register pairs, (potentially punching reg holes when passing such values as args). This was partly driven by the fact that the double-word LDD/STD instructions in ARCv2 expect the register alignment and thus gcc forcing this avoids extra MOV at the cost of a few unused register (which we have plenty anyways). This however was rejected as part of upstreaming gcc port to HS. So the new ABI v4 doesn't enforce the even-odd reg restriction. Do note that for ARCompact ISA builds v3 and v4 are practically the same in terms of gcc code generation. In terms of change management, we infer the new ABI if gcc 6.x onwards is used for building the kernel. This also needs a stable backport to enable older kernels to work with new tools/user-space Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-08-19ARC: use correct offset in pt_regs for saving/restoring user mode r25Liav Rehana1-2/+2
User mode callee regs are explicitly collected before signal delivery or breakpoint trap. r25 is special for kernel as it serves as task pointer, so user mode value is clobbered very early. It is saved in pt_regs where generally only scratch (aka caller saved) regs are saved. The code to access the corresponding pt_regs location had a subtle bug as it was using load/store with scaling of offset, whereas the offset was already byte wise correct. So fix this by replacing LD.AS with a standard LD Cc: <stable@vger.kernel.org> Signed-off-by: Liav Rehana <liavr@mellanox.com> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com> [vgupta: rewrote title and commit log] Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-08-19Merge tag 'dm-4.8-fixes-2' of ↵Linus Torvalds3-38/+53
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - a stable fix for DM round robin multipath path selector to disable preemption before using this_cpu_ptr() - a slight increase in DM crypt's mempool reserves to make swap ontop of DM crypt more performant - a few DM raid fixes to issues found while testing changes that were merged in v4.8-rc1 * tag 'dm-4.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm raid: support raid0 with missing metadata devices dm raid: enhance attempt_restore_of_faulty_devices() to support more devices dm raid: fix restoring of failed devices regression dm raid: fix frozen recovery regression dm crypt: increase mempool reserve to better support swapping dm round robin: do not use this_cpu_ptr() without having preemption disabled
2016-08-19Merge tag 'scsi-fixes' of ↵Linus Torvalds6-19/+29
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Six fairly small fixes. The ipr, mpt3sas and ses ones all trigger oopses. The megaraid one fixes an attach failure on io mapped only cards, the fcoe one is an obvious problem in the error path and the aacraid one is a theoretical security issue (ability to trick the kernel into a buffer overrun)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: ses: Fix racy cleanup of /sys in remove_dev() mpt3sas: Fix resume on WarpDrive flash cards ipr: Fix sync scsi scan megaraid_sas: Fix probing cards without io port aacraid: Check size values after double-fetch from user fcoe: Use kfree_skb() instead of kfree()
2016-08-19Merge tag 'usb-4.8-rc3' of ↵Linus Torvalds31-79/+215
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of USB fixes for reported issues for your tree. The normal amount of gadget fixes, xhci fixes, new device ids, and a few other minor things. All of them have been in linux-next for a while, the full details are in the shortlog below" * tag 'usb-4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (43 commits) xhci: don't dereference a xhci member after removing xhci usb: xhci: Fix panic if disconnect xhci: really enqueue zero length TRBs. xhci: always handle "Command Ring Stopped" events cdc-acm: fix wrong pipe type on rx interrupt xfers usb: misc: usbtest: add fix for driver hang usb: dwc3: gadget: stop processing on HWO set usb: dwc3: don't set last bit for ISOC endpoints usb: gadget: rndis: free response queue during REMOTE_NDIS_RESET_MSG usb: udc: core: fix error handling usb: gadget: fsl_qe_udc: off by one in setup_received_handle() usb/gadget: fix gadgetfs aio support. usb: gadget: composite: Fix return value in case of error usb: gadget: uvc: Fix return value in case of error usb: gadget: fix check in sync read from ep in gadgetfs usb: misc: usbtest: usbtest_do_ioctl may return positive integer usb: dwc3: fix missing platform_set_drvdata() in dwc3_of_simple_probe() usb: phy: omap-otg: Fix missing platform_set_drvdata() in omap_otg_probe() usb: gadget: configfs: add mutex lock before unregister gadget usb: gadget: u_ether: fix dereference after null check coverify warning ...
2016-08-19Merge tag 'xfs-iomap-for-linus-4.8-rc3' of ↵Linus Torvalds11-28/+119
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull xfs and iomap fixes from Dave Chinner: "Changes in this update: Regression fixes for XFS changes introduce in 4.8-rc1: - buffer IO accounting assert failure - ENOSPC block accounting reservation issue - DAX IO path page cache invalidation fix - rmapbt on-disk block count in agf - correct classification of rmap block type when updating AGFL. - iomap support for attribute fork mapping Regression fixes for iomap infrastructure in 4.8-rc1: - fiemap: honor FIEMAP_FLAG_SYNC - fiemap: implement FIEMAP_FLAG_XATTR support to fix XFS regression - make mark_page_accessed and pagefault_disable usage consistent with other IO paths" * tag 'xfs-iomap-for-linus-4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: remove OWN_AG rmap when allocating a block from the AGFL xfs: (re-)implement FIEMAP_FLAG_XATTR xfs: simplify xfs_file_iomap_begin iomap: mark ->iomap_end as optional iomap: prepare iomap_fiemap for attribute mappings iomap: fiemap should honor the FIEMAP_FLAG_SYNC flag iomap: remove superflous pagefault_disable from iomap_write_actor iomap: remove superflous mark_page_accessed from iomap_write_actor xfs: store rmapbt block count in the AGF xfs: don't invalidate whole file on DAX read/write xfs: fix bogus space reservation in xfs_iomap_write_allocate xfs: don't assert fail on non-async buffers on ioacct decrement
2016-08-19Merge tag 'hwmon-for-linus-v4.8-rc2' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fix a bug in it87 driver and URLs in ftsteutates driver" * tag 'hwmon-for-linus-v4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ftsteutates) Correct ftp urls in driver documentation hwmon: (it87) Features mask must be 32 bit wide
2016-08-19gpio: make any OF dependent driver depend on OF_GPIOLinus Walleij1-5/+5
The drivers that depend on OF but not OF_GPIO are wreaking havoc with the autobuilders for archs that have all requirements for OF but not for OF_GPIO, particularly the UM (Usermode) arch does not have iomem (NO_IOMEM) which result in configuring GPIOLIB but without OF_GPIO which is wrong if the driver is using the .of_node of the gpiochip, which only appears with OF_GPIO. After a brief look at the drivers just depending on OF it seems most if not all of them actually require stuff from gpiolib-of so the dependency is wrong in the first place. This simply patches the Kconfig so that all GPIO drivers using OF depend on OF_GPIO rather than just OF. Cc: Rabin Vincent <rabin@rab.in> Cc: Pramod Gurav <pramod.gurav@smartplayin.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-19gpio: Fix OF build problem on UMLinus Walleij1-0/+1
The UserMode (UM) Linux build was failing in gpiolib-of as it requires ioremap()/iounmap() to exist, which is absent from UM. The non-existence of IO memory is negatively defined as CONFIG_NO_IOMEM which means we need to depend on HAS_IOMEM. Cc: stable@vger.kernel.org Cc: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-18Merge tag 'drm-fixes-for-4.8-rc3-2' of ↵Linus Torvalds11-100/+224
git://people.freedesktop.org/~airlied/linux Pull more drm fixes from Dave Airlie: "Daniel pointed out I'd missed some i915 fixes, and I also found a single etnaviv fix I missed. So here they are" * tag 'drm-fixes-for-4.8-rc3-2' of git://people.freedesktop.org/~airlied/linux: drm/etnaviv: take GPU lock later in the submit process drm/i915: Fix modeset handling during gpu reset, v5. drm/i915: fix aliasing_ppgtt leak drm/i915: fix WaInsertDummyPushConstPs drm/i915: Fix iboost setting for SKL Y/U DP DDI buffer translation entry 2 drm/i915/gen9: Give one extra block per line for SKL plane WM calculations drm/i915: Acquire audio powerwell for HD-Audio registers drm/i915: Add missing rpm wakelock to GGTT pread drm/i915/fbc: FBC causes display flicker when VT-d is enabled on Skylake drm/i915: Clean up the extra RPM ref on CHV with i915.enable_rc6=0 drm/i915: Program iboost settings for HDMI/DVI on SKL drm/i915: Fix iboost setting for DDI with 4 lanes on SKL drm/i915: Handle ENOSPC after failing to insert a mappable node drm/i915: Flush GT idle status upon reset
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-09 06:13:06 +0000