| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There are some people interested in experimenting with Clang's
integrated assembler. To make it easy to do so without source
modification, allow the user to specify 'AS=clang' as part of the
make command to avoid adding '-no-integrated-as' to the {A,C}FLAGS.
Link: https://github.com/ClangBuiltLinux/linux/issues/577
Suggested-by: Dmitry Golovin <dima@golovin.in>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
When there is not enough space on your storage device, the build will
fail with 'No space left on device' error message.
The reason is obvious from the message, so you will free up some disk
space, then you will resume the build.
However, sometimes you may still see a mysterious error message:
unterminated call to function 'wildcard': missing ')'.
If you run out of the disk space, fixdep may end up with generating
incomplete .*.cmd files.
For example, if the disk-full error occurs while fixdep is running
print_dep(), the .*.cmd might be truncated like this:
$(wildcard include/config/
When you run 'make' next time, this broken .*.cmd will be included,
then Make will terminate parsing since it is a wrong syntax.
Once this happens, you need to run 'make clean' or delete the broken
.*.cmd file manually.
Even if you do not see any error message, the .*.cmd files after any
error could be potentially incomplete, and unreliable. You may miss
the re-compilation due to missing header dependency.
If printf() cannot output the string for disk shortage or whatever
reason, it returns a negative value, but currently fixdep does not
check it at all. Consequently, fixdep *successfully* generates a
broken .*.cmd file. Make never notices that since fixdep exits with 0,
which means success.
Given the intended usage of fixdep, it must respect the return value
of not only malloc(), but also printf() and putchar().
This seems a long-standing issue since the introduction of fixdep.
In old days, Kbuild tried to provide an extra safety by letting fixdep
output to a temporary file and renaming it after everything is done:
scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(dot-target).tmp;\
rm -f $(depfile); \
mv -f $(dot-target).tmp $(dot-target).cmd)
It was no help to avoid the current issue; fixdep successfully created
a truncated tmp file, which would be renamed to a .*.cmd file.
This problem should be fixed by propagating the error status to the
build system because:
[1] Since commit 9c2af1c7377a ("kbuild: add .DELETE_ON_ERROR special
target"), Make will delete the target automatically on any failure
in the recipe.
[2] Since commit 392885ee82d3 ("kbuild: let fixdep directly write to
.*.cmd files"), .*.cmd file is included only when the corresponding
target already exists.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
modules.order is a real target. Split its build rule out like
modules.builtin
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Unlike modules.order, modules.builtin is not rebuilt every time.
Once modules.builtin is created, it will not be updated until
auto.conf or tristate.conf is changed.
So, it does not notice a change in Makefile, for example, the rename
of modules.
Kbuild must always descend into directories for modules.builtin too.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
The string returned by $(filter-out ...) does not contain any leading
or trailing spaces.
With the previous commit, 'any-prereq' no longer contains any
excessive spaces.
Nor does 'cmd-check' since it expands to a $(filter-out ...) call.
So, only the space that matters is the one between 'any-prereq'
and 'cmd-check'.
By removing it from the code, we can save $(strip ...) evaluation.
This refactoring is possible because $(any-prereq)$(cmd-check) is only
passed to the first argument of $(if ...), so we are only interested
in whether or not it is empty.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
The string returned by $(filter-out ...) does not contain any leading
or trailing spaces.
So, only the space that matters is the one between
$(filter-out $(PHONY),$?)
and
$(filter-out $(PHONY) $(wildcard $^),$^)
By removing it from the code, we can save $(strip ...) evaluation.
This refactoring is possible because $(any-prereq) is only passed to
the first argument of $(if ...), so we are only interested in whether
or not it is empty.
This is also the prerequisite for the next commit.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
I prefer 'cmd-check' for consistency.
We have 'echo-cmd', 'cmd', 'cmd_and_fixdep', etc. in this file.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Since commit d5470d14431e ("kbuild: re-implement Makefile.headersinst
without recursion"), headers_install emits an ugly warning.
$ make headers_install
[ snip ]
UPD include/generated/uapi/linux/version.h
find: ‘./include/uapi/Kbuild’: No such file or directory
HDRINST usr/include/video/uvesafb.h
...
This happens for GNU Make <= 4.2.1
When I wrote that commit, I missed this warning because I was using the
state-of-the-art Make version compiled from the git tree.
$(wildcard $(src)/*/) is intended to match to only existing directories
since it has a trailing slash, but actually matches to regular files too.
(include/uapi/Kbuild in this case)
This is a bug of GNU Make, and was fixed by:
| commit b7acb10e86dc8f5fdf2a2bbd87e1059c315e31d6
| Author: spagoveanu@gmail.com <spagoveanu@gmail.com>
| Date: Wed Jun 20 02:03:48 2018 +0300
|
| * src/dir.c: Preserve glob d_type field
We need to cater to old Make versions. Add '$(filter %/,...) to filter
out the regular files.
Fixes: d5470d14431e ("kbuild: re-implement Makefile.headersinst without recursion")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
__uint128_t crops up in a few files that export symbols to modules, so
teach genksyms about it and the other GCC built-in 128-bit integer types
so that we don't end up skipping the CRC generation for some symbols due
to the parser failing to spot them:
| WARNING: EXPORT symbol "kernel_neon_begin" [vmlinux] version
| generation failed, symbol will not be versioned.
| ld: arch/arm64/kernel/fpsimd.o: relocation R_AARCH64_ABS32 against
| `__crc_kernel_neon_begin' can not be used when making a shared
| object
| ld: arch/arm64/kernel/fpsimd.o:(.data+0x0): dangerous relocation:
| unsupported relocation
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
This flag turns off several other warnings that would
be useful. Most notably -warn_unused_result is disabled.
All of the following warnings are currently disabled:
UnusedValue
|-UnusedComparison
|-warn_unused_comparison
|-UnusedResult
|-warn_unused_result
|-UnevaluatedExpression
|-PotentiallyEvaluatedExpression
|-warn_side_effects_typeid
|-warn_side_effects_unevaluated_context
|-warn_unused_expr
|-warn_unused_voidptr
|-warn_unused_container_subscript_expr
|-warn_unused_call
With this flag removed there are ~10 warnings.
Patches have been submitted for each of these warnings.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/520
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
This Makefile repeats very similar rules.
Let's use pattern rules. $(UNROLL) can be replaced with $*.
No intended change in behavior.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
No intended change in behavior.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
This helps fine very dodgy behavior through both -Wuninitialized
(warning that a variable is always uninitialized) and
-Wsometimes-uninitialized (warning that a variable is sometimes
uninitialized, like GCC's -Wmaybe-uninitialized). These warnings
catch things that GCC doesn't such as:
https://lore.kernel.org/lkml/86649ee4-9794-77a3-502c-f4cd10019c36@lca.pw/
We very much want to catch these so turn this warning on so that CI is
aware of it.
Link: https://github.com/ClangBuiltLinux/linux/issues/381
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
In commit ebcc5928c5d9 ("arm64: Silence gcc warnings about arch ABI
drift"), the arm64 Makefile added -Wno-psabi to KBUILD_CFLAGS, which is
a GCC only option so clang rightfully complains:
warning: unknown warning option '-Wno-psabi' [-Wunknown-warning-option]
https://clang.llvm.org/docs/DiagnosticsReference.html#wunknown-warning-option
However, by default, this is merely a warning so the build happily goes
on with a slew of these warnings in the process.
Commit c3f0d0bc5b01 ("kbuild, LLVMLinux: Add -Werror to cc-option to
support clang") worked around this behavior in cc-option by adding
-Werror so that unknown flags cause an error. However, this all happens
silently and when an unknown flag is added to the build unconditionally
like -Wno-psabi, cc-option will always fail because there is always an
unknown flag in the list of flags. This manifested as link time failures
in the arm64 libstub because -fno-stack-protector didn't get added to
KBUILD_CFLAGS.
To avoid these weird cryptic failures in the future, make clang behave
like gcc and immediately error when it encounters an unknown flag by
adding -Werror=unknown-warning-option to CLANG_FLAGS. This can be added
unconditionally for clang because it is supported by at least 3.0.0,
according to godbolt [1] and 4.0.0, according to its documentation [2],
which is far earlier than we typically support.
[1]: https://godbolt.org/z/7F7rm3
[2]: https://releases.llvm.org/4.0.0/tools/clang/docs/DiagnosticsReference.html#wunknown-warning-option
Link: https://github.com/ClangBuiltLinux/linux/issues/511
Link: https://github.com/ClangBuiltLinux/linux/issues/517
Suggested-by: Peter Smith <peter.smith@linaro.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Sometimes it's useful to be able to explicitly ensure certain headers
remain self-contained, i.e. that they are compilable as standalone
units, by including and/or forward declaring everything they depend on.
Add special target header-test-y where individual Makefiles can add
headers to be tested if CONFIG_HEADER_TEST is enabled. This will
generate a dummy C file per header that gets built as part of extra-y.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
It is absolutely fine to add extra sanity checks in package scripts,
but it is not necessary to do so.
This is already covered by the daily compile-testing (0day bot etc.)
because headers_check is run as a part of the normal build process
when CONFIG_HEADERS_CHECK=y.
Replace it with the newly-added "make headers".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Now that headers_install.sh is invoked per file, remove the for-loop
in the shell script.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Now that hdr-inst is used only in the top Makefile, move it there
from scripts/Kbuild.include.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Since commit fcc8487d477a ("uapi: export all headers under uapi
directories"), the headers in uapi directories are all exported by
default although exceptional cases are still allowed by the syntax
'no-export-headers'.
The traditional directory descending has been kept (in a somewhat
hacky way), but it is actually unneeded.
Get rid of it to simplify the code.
Also, handle files one by one instead of the previous per-directory
processing. This will emit much more log, but I like it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
In Linux build system, build targets and installation targets are
separated.
Examples are:
- 'make vmlinux' -> 'make install'
- 'make modules' -> 'make modules_install'
- 'make dtbs' -> 'make dtbs_install'
- 'make vdso' -> 'make vdso_install'
The intention is to run the build targets under the normal privilege,
then the installation targets under the root privilege since we need
the write permission to the system directories.
We have 'make headers_install' but the corresponding 'make headers'
stage does not exist. The purpose of headers_install is to provide
the kernel interface to C library. So, nobody would try to install
headers to /usr/include directly.
If 'sudo make INSTALL_HDR_PATH=/usr/include headers_install' were run,
some build artifacts in the kernel tree would be owned by root because
some of uapi headers are generated by 'uapi-asm-generic', 'archheaders'
targets.
Anyway, I believe it makes sense to split the header installation into
two stages.
[1] 'make headers'
Process headers in uapi directories by scripts/headers_install.sh
and copy them to usr/include
[2] 'make headers_install'
Copy '*.h' verbatim from usr/include to $(INSTALL_HDR_PATH)/include
For the backward compatibility, 'headers_install' depends on 'headers'.
Some samples expect uapi headers in usr/include. So, the 'headers'
target is useful to build up them in the fixed location usr/include
irrespective of INSTALL_HDR_PATH.
Another benefit is to stop polluting the final destination with the
time-stamp files '.install' and '.check'. Maybe you can see them in
your toolchains.
Lastly, my main motivation is to prepare for compile-testing uapi
headers. To build something, we have to save an object and .*.cmd
somewhere. The usr/include/ will be the work directory for that.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Currently, scripts/unifdef is compiled after scripts_basic,
uapi-asm-generic, archheaders, and archscripts.
The proper dependency is just scripts_basic. There is no problem
to compile scripts/unifdef and other headers at the same time.
Split scripts_unifdef out in order to allow more parallel building.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Since commit 2aedcd098a94 ("kbuild: suppress annoying "... is up to date."
message"), if_changed and friends nicely suppress "is up to date" messages.
We do not need per-Makefile tricks.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Commit 5318321d367c ("samples: disable CONFIG_SAMPLES for UML") used
a big hammer to fix the build errors under the samples/ directory.
Only some samples actually include uapi headers from usr/include.
Introduce CONFIG_HEADERS_INSTALL since 'depends on HEADERS_INSTALL' is
clearer than 'depends on !UML'. If this option is enabled, uapi headers
are installed before starting directory descending.
I added 'depends on HEADERS_INSTALL' to per-sample CONFIG options.
This allows UML to compile some samples.
$ make ARCH=um allmodconfig samples/
[ snip ]
CC [M] samples/configfs/configfs_sample.o
CC [M] samples/kfifo/bytestream-example.o
CC [M] samples/kfifo/dma-example.o
CC [M] samples/kfifo/inttype-example.o
CC [M] samples/kfifo/record-example.o
CC [M] samples/kobject/kobject-example.o
CC [M] samples/kobject/kset-example.o
CC [M] samples/trace_events/trace-events-sample.o
CC [M] samples/trace_printk/trace-printk.o
AR samples/vfio-mdev/built-in.a
AR samples/built-in.a
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Prior to commit 257edce66d31 ("kbuild: exploit parallel building for
CONFIG_HEADERS_CHECK"), the sanity check of exported headers was done
as a side-effect of build rule of vmlinux.
That commit is good, but I missed to update the prompt of the Kconfig
entry. For the sake of preciseness, lets' say "when building 'all'".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
'gdb_script' needs headers generated by ./Kbuild, which is visited
by 'prepare0'. None of 'gdb_script' depends on 'prepare'.
Loosen the dependency.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Commit 8e2faea877eb ("Make Documenation depend on headers_install")
dates back to 2014, which is before Sphinx was introduced for the
kernel documentation.
Since none of DOC_TARGET requires headers_install, it is strange to
run it only for the single target "Documentation/".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
headers_install_all does not make much sense any more because different
architectures export different set of uapi/linux/ headers. As you see
in include/uapi/linux/Kbuild, the installation of a.out.h, kvm.h, and
kvm_para.h is arch-dependent. So, headers_install_all repeats the
installation/removal of them.
If somebody really thinks it is useful to do headers_install for all
architectures, it would be possible by small shell-scripting, but
the top Makefile does not have to provide entry targets just for that
purpose.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
|
|
It makes little sense to pass -Waggregate-return these days since large
part of the linux kernel rely on returning struct(s). For instance:
../include/linux/timekeeping.h: In function 'show_uptime':
../include/linux/ktime.h:91:34: error: function call has aggregate value [-Werror=aggregate-return]
#define ktime_to_timespec64(kt) ns_to_timespec64((kt))
^~~~~~~~~~~~~~~~~~~~~~
../include/linux/timekeeping.h:166:8: note: in expansion of macro 'ktime_to_timespec64'
*ts = ktime_to_timespec64(ktime_get_coarse_boottime());
Remove this warning from W=2 completely.
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
|
|
Pull ceph fixes from Ilya Dryomov:
"A change to call iput() asynchronously to avoid a possible deadlock
when iput_final() needs to wait for in-flight I/O (e.g. readahead) and
a fixup for a cleanup that went into -rc1"
* tag 'ceph-for-5.2-rc4' of git://github.com/ceph/ceph-client:
ceph: fix error handling in ceph_get_caps()
ceph: avoid iput_final() while holding mutex or in dispatch thread
ceph: single workqueue for inode related works
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"Just one fix for the Xen block frontend driver avoiding allocations
with order > 0"
* tag 'for-linus-5.2b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-blkfront: switch kcalloc to kvcalloc for large array allocation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- fix stack unwinder: the stack unwinder rework has on off-by-one bug
which prevents following stack backchains over more than one context
(e.g. irq -> process).
- fix address space detection in exception handler: if user space
switches to access register mode, which is not supported anymore, the
exception handler may resolve to the wrong address space.
* tag 's390-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/unwind: correct stack switching during unwind
s390/mm: fix address space detection in exception handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
- Declare ginvt() __always_inline due to its use of an argument as an
inline asm immediate.
- A VDSO build fix following Kbuild changes made this cycle.
- A fix for boot failures on txx9 systems following memory
initialization changes made this cycle.
- Bounds check virt_addr_valid() to prevent it spuriously indicating
that bogus addresses are valid, in turn fixing hardened usercopy
failures that have been present since v4.12.
- Build uImage.gz for pistachio systems by default, since this is the
image we need in order to actually boot on a board.
- Remove an unused variable in our uprobes code.
* tag 'mips_fixes_5.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: uprobes: remove set but not used variable 'epc'
MIPS: pistachio: Build uImage.gz by default
MIPS: Make virt_addr_valid() return bool
MIPS: Bounds check virt_addr_valid
MIPS: TXx9: Fix boot crash in free_initmem()
MIPS: remove a space after -I to cope with header search paths for VDSO
MIPS: mark ginvt() as __always_inline
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull yet more SPDX updates from Greg KH:
"Another round of SPDX header file fixes for 5.2-rc4
These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
added, based on the text in the files. We are slowly chipping away at
the 700+ different ways people tried to write the license text. All of
these were reviewed on the spdx mailing list by a number of different
people.
We now have over 60% of the kernel files covered with SPDX tags:
$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
Files checked: 64533
Files with SPDX: 40392
Files with errors: 0
I think the majority of the "easy" fixups are now done, it's now the
start of the longer-tail of crazy variants to wade through"
* tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for 5.2-rc4 to resolve
a number of reported issues.
The most "notable" one here is the kernel headers in proc^Wsysfs
fixes. Those changes move the header file info into sysfs and fixes
the build issues that you reported.
Other than that, a bunch of small habanalabs driver fixes, some fpga
driver fixes, and a few other tiny driver fixes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
habanalabs: Read upper bits of trace buffer from RWPHI
habanalabs: Fix virtual address access via debugfs for 2MB pages
fpga: zynqmp-fpga: Correctly handle error pointer
habanalabs: fix bug in checking huge page optimization
habanalabs: Avoid using a non-initialized MMU cache mutex
habanalabs: fix debugfs code
uapi/habanalabs: add opcode for enable/disable device debug mode
habanalabs: halt debug engines on user process close
test_firmware: Use correct snprintf() limit
genwqe: Prevent an integer overflow in the ioctl
parport: Fix mem leak in parport_register_dev_model
fpga: dfl: expand minor range when registering chrdev region
fpga: dfl: Add lockdep classes for pdata->lock
fpga: dfl: afu: Pass the correct device to dma_mapping_error()
fpga: stratix10-soc: fix use-after-free on s10_init()
w1: ds2408: Fix typo after 49695ac46861 (reset on output_write retry with readback)
kheaders: Do not regenerate archive if config is not changed
kheaders: Move from proc to sysfs
lkdtm/bugs: Adjust recursion test to avoid elision
lkdtm/usercopy: Moves the KERNEL_DS test to non-canonical
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C has a driver bugfix and a MAINTAINERS fix"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Karthikeyan Ramasubramanian is MIA
i2c: xiic: Add max_read_len quirk
|
|
git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
- jz4780 transfer fix for acking descriptors early
- fsl-qdma: clean registers on error
- dw-axi-dmac: null pointer dereference fix
- mediatek-cqdma: fix sleeping in atomic context
- tegra210-adma: fix bunch os issues like crashing in driver probe,
channel FIFO configuration etc.
- sprd: Fixes for possible crash on descriptor status, block length
overflow. For 2-stage transfer fix incorrect start, configuration and
interrupt handling.
* tag 'dmaengine-fix-5.2-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: sprd: Add interrupt support for 2-stage transfer
dmaengine: sprd: Fix the right place to configure 2-stage transfer
dmaengine: sprd: Fix block length overflow
dmaengine: sprd: Fix the incorrect start for 2-stage destination channels
dmaengine: sprd: Add validation of current descriptor in irq handler
dmaengine: sprd: Fix the possible crash when getting descriptor status
dmaengine: tegra210-adma: Fix spelling
dmaengine: tegra210-adma: Fix channel FIFO configuration
dmaengine: tegra210-adma: Fix crash during probe
dmaengine: mediatek-cqdma: sleeping in atomic context
dmaengine: dw-axi-dmac: fix null dereference when pointer first is null
dmaengine: fsl-qdma: Add improvement
dmaengine: jz4780: Fix transfers being ACKed too soon
|
|
Pull block fixes from Jens Axboe:
- Allow symlink from the bfq.weight cgroup parameter to the general
weight (Angelo)
- Damien is new skd maintainer (Bart)
- NVMe pull request from Sagi, with a few small fixes.
- Ensure we set DMA segment size properly, dma-debug is now tripping on
these (Christoph)
- Remove useless debugfs_create() return check (Greg)
- Remove redundant unlikely() check on IS_ERR() (Kefeng)
- Fixup request freeing on exit (Ming)
* tag 'for-linus-20190608' of git://git.kernel.dk/linux-block:
block, bfq: add weight symlink to the bfq.weight cgroup parameter
cgroup: let a symlink too be created with a cftype file
block: free sched's request pool in blk_cleanup_queue
nvme-rdma: use dynamic dma mapping per command
nvme: Fix u32 overflow in the number of namespace list calculation
mmc: also set max_segment_size in the device
mtip32xx: also set max_segment_size in the device
rsxx: don't call dma_set_max_seg_size
nvme-pci: don't limit DMA segement size
block: Drop unlikely before IS_ERR(_OR_NULL)
block: aoe: no need to check return value of debugfs_create functions
nvmet: fix data_len to 0 for bdev-backed write_zeroes
MAINTAINERS: Hand over skd maintainership
nvme-tcp: fix queue mapping when queue count is limited
nvme-rdma: fix queue mapping when queue count is limited
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two bug fixes, both for fairly serious problems; the UFS one looks
like it could be used to exfiltrate data from the kernel, although
probably only a privileged user has access to the command management
interface and the missing unlock in smartpqi is long standing and
probably a little used error path"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: smartpqi: unlock on error in pqi_submit_raid_request_synchronous()
scsi: ufs: Check that space was properly alloced in copy_query_response
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
"This consists of a single fix for a vm test build failure regression
when it is built by itself"
* tag 'linux-kselftest-5.2-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: vm: Fix test build failure when built by itself
|
|
Pull drm fixes from Dave Airlie:
"A small bit more lively this week but not majorly so. I'm away in
Japan next week for family holiday, so I'll be pretty disconnected,
I've asked Daniel to do fixes for the week while I'm out.
The nouveau firmware changes are a bit large, but they address a big
problem where a whole set of boards don't load with the driver, and
the new firmware fixes that, so I think it's worth trying to land it
now.
core:
- Allow fb changes in async commits (drivers as well)
udmabuf:
- Unmap scatterlist when unmapping udmabuf
nouveau:
- firmware loading fixes for secboot firmware on new GPU revision.
komeda:
- oops, dma mapping and warning fixes
arm-hdlcd:
- clock fixes
- mode validation fix
i915:
- Add a missing Icelake workaround
- GVT - DMA map fault fix and enforcement fixes
amdgpu:
- DCE resume fix
- New raven variation updates"
* tag 'drm-fixes-2019-06-07-1' of git://anongit.freedesktop.org/drm/drm: (33 commits)
drm/nouveau/secboot/gp10[2467]: support newer FW to fix SEC2 failures on some boards
drm/nouveau/secboot: enable loading of versioned LS PMU/SEC2 ACR msgqueue FW
drm/nouveau/secboot: split out FW version-specific LS function pointers
drm/nouveau/secboot: pass max supported FW version to LS load funcs
drm/nouveau/core: support versioned firmware loading
drm/nouveau/core: pass subdev into nvkm_firmware_get, rather than device
drm/komeda: Potential error pointer dereference
drm/komeda: remove set but not used variable 'kcrtc'
drm/amd/amdgpu: add RLC firmware to support raven1 refresh
drm/amd/powerplay: add set_power_profile_mode for raven1_refresh
drm/amdgpu: fix ring test failure issue during s3 in vce 3.0 (V2)
udmabuf: actually unmap the scatterlist
drm/arm/hdlcd: Allow a bit of clock tolerance
drm/arm/hdlcd: Actually validate CRTC modes
drm/arm/mali-dp: Add a loop around the second set CVAL and try 5 times
drm/komeda: fixing of DMA mapping sg segment warning
drm: don't block fb changes for async plane updates
drm/vc4: fix fb references in async update
drm/msm: fix fb references in async update
drm/amd: fix fb references in async update
...
|
|
A mail just bounced back with "user unknown":
550 5.1.1 <kramasub@codeaurora.org> User doesn't exist
I also couldn't find a more recent address in git history. So, remove
this stale entry.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
This driver does not support reading more than 255 bytes at once because
the register for storing the number of bytes to read is only 8 bits. Add
a max_read_len quirk to enforce this.
This was found when using this driver with the SFP driver, which was
previously reading all 256 bytes in the SFP EEPROM in one transaction.
This caused a bunch of hard-to-debug errors in the xiic driver since the
driver/logic was treating the number of bytes to read as zero.
Rejecting transactions that aren't supported at least allows the problem
to be diagnosed more easily.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix a couple of inconsistencies and locking problems in pmbus driver
- Register with thermal subsystem only on systems supporting devicetree
* tag 'hwmon-for-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus/core) Treat parameters as paged if on multiple pages
hwmon: (pmbus/core) mutex_lock write in pmbus_set_samples
hwmon: (core) add thermal sensors only if dev->of_node is present
|
|
The lockref cmpxchg loop is unbound as long as the spinlock is not
taken. Depending on the hardware implementation of compare-and-swap
a high number of loop retries might happen.
Add an upper bound to the loop to force the fallback to spinlocks
after some time. A retry value of 100 should not impact any hardware
that does not have this issue.
With the retry limit the performance of an open-close testcase
improved between 60-70% on ThunderX2.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jan Glauber <jglauber@marvell.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Architectures that support memory tagging have a need to perform untagging
(stripping the tag) in various parts of the kernel. This patch adds an
untagged_addr() macro, which is defined as noop for architectures that do
not support memory tagging. The oncoming patch series will define it at
least for sparc64 and arm64.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull xtensa fix from Max Filippov:
"Fix a section mismatch between memblock_reserve and mem_reserve.
This fixes tinyconfig xtensa builds"
* tag 'xtensa-20190607' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: Fix section mismatch between memblock_reserve and mem_reserve
|
|
Pull NVMe fixes from Sagi.
* 'nvme-5.2-rc-next' of git://git.infradead.org/nvme:
nvme-rdma: use dynamic dma mapping per command
nvme: Fix u32 overflow in the number of namespace list calculation
nvmet: fix data_len to 0 for bdev-backed write_zeroes
nvme-tcp: fix queue mapping when queue count is limited
nvme-rdma: fix queue mapping when queue count is limited
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild fixes from Masahiro Yamada:
- fix kselftest-merge to find config fragments in deeper directories
- fix kconfig unit test, which was broken by SPDX tag addition
- add + prefix to buildtar to suppress jobserver unavailable warning
- fix checkstack.pl to recognize arch=arm64
- suppress noisy warning from cc-cross-prefix
* tag 'kbuild-fixes-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: use more portable 'command -v' for cc-cross-prefix
scripts/checkstack.pl: Fix arm64 wrong or unknown architecture
kbuild: tar-pkg: enable communication with jobserver
kconfig: tests: fix recursive inclusion unit test
kbuild: teach kselftest-merge to find nested config files
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"Here's a couple of MMC and MEMSTICK fixes:
MMC host:
- sdhci: Fix SDIO IRQ thread deadlock
- sdhci-tegra: Fix a warning message
- sdhci_am654: Fix SLOTTYPE write
- meson-gx: Fix IRQ ack
- tmio: Fix SCC error handling to avoid false positive CRC error
MEMSTICK core:
- mspro_block: Fix returning a correct error code"
* tag 'mmc-v5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci_am654: Fix SLOTTYPE write
mmc: sdhci: Fix SDIO IRQ thread deadlock
mmc: meson-gx: fix irq ack
mmc: tmio: fix SCC error handling to avoid false positive CRC error
mmc: tegra: Fix a warning message
memstick: mspro_block: Fix an error code in mspro_block_issue_req()
|
