summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2021-01-08block/rnbd: Select SG_POOL for RNBD_CLIENTJack Wang1-0/+1
lkp reboot following build error: drivers/block/rnbd/rnbd-clt.c: In function 'rnbd_softirq_done_fn': >> drivers/block/rnbd/rnbd-clt.c:387:2: error: implicit declaration of function 'sg_free_table_chained' [-Werror=implicit-function-declaration] 387 | sg_free_table_chained(&iu->sgt, RNBD_INLINE_SG_CNT); | ^~~~~~~~~~~~~~~~~~~~~ The reason is CONFIG_SG_POOL is not enabled in the config, to avoid such failure, select SG_POOL in Kconfig for RNBD_CLIENT. Fixes: 5a1328d0c3a7 ("block/rnbd-clt: Dynamically allocate sglist for rnbd_iu") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-08KVM: x86: __kvm_vcpu_halt can be staticPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-08Merge tag 'kvmarm-fixes-5.11-1' of ↵Paolo Bonzini19-118/+122
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.11, take #1 - VM init cleanups - PSCI relay cleanups - Kill CONFIG_KVM_ARM_PMU - Fixup __init annotations - Fixup reg_to_encoding() - Fix spurious PMCR_EL0 access
2021-01-08Merge tag 'drm-misc-fixes-2021-01-08' of ↵Daniel Vetter3-9/+17
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes * dma-buf: fix a use-after-free * radeon: don't init the TTM page pool manually * ttm: unexport ttm_pool_{init,fini}() Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/X/gnKs52t8xUuAlE@linux-uq9g
2021-01-08Merge tag 'drm-msm-fixes-2021-01-07' of ↵Daniel Vetter10-26/+63
https://gitlab.freedesktop.org/drm/msm into drm-fixes A few misc fixes from Rob, mostly fallout from the locking rework that landed in the merge window, plus a few smaller things. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtWMhzyD6kejmViZeZ+zfJxRvfq-R2t_zA+DcDiTxsYRQ@mail.gmail.com
2021-01-08x86/resctrl: Don't move a task to the same resource groupFenghua Yu1-0/+7
Shakeel Butt reported in [1] that a user can request a task to be moved to a resource group even if the task is already in the group. It just wastes time to do the move operation which could be costly to send IPI to a different CPU. Add a sanity check to ensure that the move operation only happens when the task is not already in the resource group. [1] https://lore.kernel.org/lkml/CALvZod7E9zzHwenzf7objzGKsdBmVwTgEJ0nPgs0LUFU3SN5Pw@mail.gmail.com/ Fixes: e02737d5b826 ("x86/intel_rdt: Add tasks files") Reported-by: Shakeel Butt <shakeelb@google.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/962ede65d8e95be793cb61102cca37f7bb018e66.1608243147.git.reinette.chatre@intel.com
2021-01-08x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSRFenghua Yu1-69/+43
Currently, when moving a task to a resource group the PQR_ASSOC MSR is updated with the new closid and rmid in an added task callback. If the task is running, the work is run as soon as possible. If the task is not running, the work is executed later in the kernel exit path when the kernel returns to the task again. Updating the PQR_ASSOC MSR as soon as possible on the CPU a moved task is running is the right thing to do. Queueing work for a task that is not running is unnecessary (the PQR_ASSOC MSR is already updated when the task is scheduled in) and causing system resource waste with the way in which it is implemented: Work to update the PQR_ASSOC register is queued every time the user writes a task id to the "tasks" file, even if the task already belongs to the resource group. This could result in multiple pending work items associated with a single task even if they are all identical and even though only a single update with most recent values is needed. Specifically, even if a task is moved between different resource groups while it is sleeping then it is only the last move that is relevant but yet a work item is queued during each move. This unnecessary queueing of work items could result in significant system resource waste, especially on tasks sleeping for a long time. For example, as demonstrated by Shakeel Butt in [1] writing the same task id to the "tasks" file can quickly consume significant memory. The same problem (wasted system resources) occurs when moving a task between different resource groups. As pointed out by Valentin Schneider in [2] there is an additional issue with the way in which the queueing of work is done in that the task_struct update is currently done after the work is queued, resulting in a race with the register update possibly done before the data needed by the update is available. To solve these issues, update the PQR_ASSOC MSR in a synchronous way right after the new closid and rmid are ready during the task movement, only if the task is running. If a moved task is not running nothing is done since the PQR_ASSOC MSR will be updated next time the task is scheduled. This is the same way used to update the register when tasks are moved as part of resource group removal. [1] https://lore.kernel.org/lkml/CALvZod7E9zzHwenzf7objzGKsdBmVwTgEJ0nPgs0LUFU3SN5Pw@mail.gmail.com/ [2] https://lore.kernel.org/lkml/20201123022433.17905-1-valentin.schneider@arm.com [ bp: Massage commit message and drop the two update_task_closid_rmid() variants. ] Fixes: e02737d5b826 ("x86/intel_rdt: Add tasks files") Reported-by: Shakeel Butt <shakeelb@google.com> Reported-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: James Morse <james.morse@arm.com> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/17aa2fb38fc12ce7bb710106b3e7c7b45acb9e94.1608243147.git.reinette.chatre@intel.com
2021-01-07block: pre-initialize struct block_device in bdev_alloc_inodeChristoph Hellwig1-2/+3
bdev_evict_inode and bdev_free_inode are also called for the root inode of bdevfs, for which bdev_alloc is never called. Move the zeroing o f struct block_device and the initialization of the bd_bdi field into bdev_alloc_inode to make sure they are initialized for the root inode as well. Fixes: e6cb53827ed6 ("block: initialize struct block_device in bdev_alloc") Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-07Merge tag 'mlx5-fixes-2021-01-07' of ↵Jakub Kicinski13-66/+122
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2021-01-07 * tag 'mlx5-fixes-2021-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Fix memleak in mlx5e_create_l2_table_groups net/mlx5e: Fix two double free cases net/mlx5: Release devlink object if adev fails net/mlx5e: ethtool, Fix restriction of autoneg with 56G net/mlx5e: In skb build skip setting mark in switchdev mode net/mlx5: E-Switch, fix changing vf VLANID net/mlx5e: Fix SWP offsets when vlan inserted by driver net/mlx5e: CT: Use per flow counter when CT flow accounting is enabled net/mlx5: Use port_num 1 instead of 0 when delete a RoCE address net/mlx5e: Add missing capability check for uplink follow net/mlx5: Check if lag is supported before creating one ==================== Link: https://lore.kernel.org/r/20210107202845.470205-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07net: dsa: lantiq_gswip: Exclude RMII from modes that report 1 GbEAleksander Jan Bajkowski1-3/+4
Exclude RMII from modes that report 1 GbE support. Reduced MII supports up to 100 MbE. Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210107195818.3878-1-olek2@wp.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07Merge branch 's390-qeth-fixes-2021-01-07'Jakub Kicinski4-17/+30
Julian Wiedmann says: ==================== s390/qeth: fixes 2021-01-07 This brings two locking fixes for the device control path. Also one fix for a path where our .ndo_features_check() attempts to access a non-existent L2 header. ==================== Link: https://lore.kernel.org/r/20210107172442.1737-1-jwi@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07s390/qeth: fix L2 header access in qeth_l3_osa_features_check()Julian Wiedmann1-1/+1
ip_finish_output_gso() may call .ndo_features_check() even before the skb has a L2 header. This conflicts with qeth_get_ip_version()'s attempt to inspect the L2 header via vlan_eth_hdr(). Switch to vlan_get_protocol(), as already used further down in the common qeth_features_check() path. Fixes: f13ade199391 ("s390/qeth: run non-offload L3 traffic over common xmit path") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07s390/qeth: fix locking for discipline setup / removalJulian Wiedmann3-10/+7
Due to insufficient locking, qeth_core_set_online() and qeth_dev_layer2_store() can run in parallel, both attempting to load & setup the discipline (and stepping on each other toes along the way). A similar race can also occur between qeth_core_remove_device() and qeth_dev_layer2_store(). Access to .discipline is meant to be protected by the discipline_mutex, so add/expand the locking in qeth_core_remove_device() and qeth_core_set_online(). Adjust the locking in qeth_l*_remove_device() accordingly, as it's now handled by the callers in a consistent manner. Based on an initial patch by Ursula Braun. Fixes: 9dc48ccc68b9 ("qeth: serialize sysfs-triggered device configurations") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07s390/qeth: fix deadlock during recoveryJulian Wiedmann4-18/+34
When qeth_dev_layer2_store() - holding the discipline_mutex - waits inside qeth_l*_remove_device() for a qeth_do_reset() thread to complete, we can hit a deadlock if qeth_do_reset() concurrently calls qeth_set_online() and thus tries to aquire the discipline_mutex. Move the discipline_mutex locking outside of qeth_set_online() and qeth_set_offline(), and turn the discipline into a parameter so that callers understand the dependency. To fix the deadlock, we can now relax the locking: As already established, qeth_l*_remove_device() waits for qeth_do_reset() to complete. So qeth_do_reset() itself is under no risk of having card->discipline ripped out while it's running, and thus doesn't need to take the discipline_mutex. Fixes: 9dc48ccc68b9 ("qeth: serialize sysfs-triggered device configurations") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07Merge branch 'nexthop-various-fixes'Jakub Kicinski2-3/+5
Ido Schimmel says: ==================== nexthop: Various fixes This series contains various fixes for the nexthop code. The bugs were uncovered during the development of resilient nexthop groups. Patches #1-#2 fix the error path of nexthop_create_group(). I was not able to trigger these bugs with current code, but it is possible with the upcoming resilient nexthop groups code which adds a user controllable memory allocation further in the function. Patch #3 fixes wrong validation of netlink attributes. Patch #4 fixes wrong invocation of mausezahn in a selftest. ==================== Link: https://lore.kernel.org/r/20210107144824.1135691-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07selftests: fib_nexthops: Fix wrong mausezahn invocationIdo Schimmel1-1/+1
For IPv6 traffic, mausezahn needs to be invoked with '-6'. Otherwise an error is returned: # ip netns exec me mausezahn veth1 -B 2001:db8:101::2 -A 2001:db8:91::1 -c 0 -t tcp "dp=1-1023, flags=syn" Failed to set source IPv4 address. Please check if source is set to a valid IPv4 address. Invalid command line parameters! Fixes: 7c741868ceab ("selftests: Add torture tests to nexthop tests") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07nexthop: Bounce NHA_GATEWAY in FDB nexthop groupsPetr Machata1-1/+1
The function nh_check_attr_group() is called to validate nexthop groups. The intention of that code seems to have been to bounce all attributes above NHA_GROUP_TYPE except for NHA_FDB. However instead it bounces all these attributes except when NHA_FDB attribute is present--then it accepts them. NHA_FDB validation that takes place before, in rtm_to_nh_config(), already bounces NHA_OIF, NHA_BLACKHOLE, NHA_ENCAP and NHA_ENCAP_TYPE. Yet further back, NHA_GROUPS and NHA_MASTER are bounced unconditionally. But that still leaves NHA_GATEWAY as an attribute that would be accepted in FDB nexthop groups (with no meaning), so long as it keeps the address family as unspecified: # ip nexthop add id 1 fdb via 127.0.0.1 # ip nexthop add id 10 fdb via default group 1 The nexthop code is still relatively new and likely not used very broadly, and the FDB bits are newer still. Even though there is a reproducer out there, it relies on an improbable gateway arguments "via default", "via all" or "via any". Given all this, I believe it is OK to reformulate the condition to do the right thing and bounce NHA_GATEWAY. Fixes: 38428d68719c ("nexthop: support for fdb ecmp nexthops") Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07nexthop: Unlink nexthop group entry in error pathIdo Schimmel1-1/+3
In case of error, remove the nexthop group entry from the list to which it was previously added. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07nexthop: Fix off-by-one error in error pathIdo Schimmel1-1/+1
A reference was not taken for the current nexthop entry, so do not try to put it in the error path. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07octeontx2-af: fix memory leak of lmac and lmac->nameColin Ian King1-3/+11
Currently the error return paths don't kfree lmac and lmac->name leading to some memory leaks. Fix this by adding two error return paths that kfree these objects Addresses-Coverity: ("Resource leak") Fixes: 1463f382f58d ("octeontx2-af: Add support for CGX link management") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210107123916.189748-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07Merge branch 'bug-fixes-for-chtls-driver'Jakub Kicinski1-47/+24
Ayush Sawal says: ==================== Bug fixes for chtls driver patch 1: Fix hardware tid leak. patch 2: Remove invalid set_tcb call. patch 3: Fix panic when route to peer not configured. patch 4: Avoid unnecessary freeing of oreq pointer. patch 5: Replace skb_dequeue with skb_peek. patch 6: Added a check to avoid NULL pointer dereference patch. patch 7: Fix chtls resources release sequence. ==================== Link: https://lore.kernel.org/r/20210106042912.23512-1-ayush.sawal@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Fix chtls resources release sequenceAyush Sawal1-4/+4
CPL_ABORT_RPL is sent after releasing the resources by calling chtls_release_resources(sk); and chtls_conn_done(sk); eventually causing kernel panic. Fixing it by calling release in appropriate order. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Added a check to avoid NULL pointer dereferenceAyush Sawal1-0/+5
In case of server removal lookup_stid() may return NULL pointer, which is used as listen_ctx. So added a check before accessing this pointer. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Replace skb_dequeue with skb_peekAyush Sawal1-1/+1
The skb is unlinked twice, one in __skb_dequeue in function chtls_reset_synq() and another in cleanup_syn_rcv_conn(). So in this patch using skb_peek() instead of __skb_dequeue(), so that unlink will be handled only in cleanup_syn_rcv_conn(). Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Avoid unnecessary freeing of oreq pointerAyush Sawal1-3/+1
In chtls_pass_accept_request(), removing the chtls_reqsk_free() call to avoid oreq freeing twice. Here oreq is the pointer to struct request_sock. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Fix panic when route to peer not configuredAyush Sawal1-2/+12
If route to peer is not configured, we might get non tls devices from dst_neigh_lookup() which is invalid, adding a check to avoid it. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Remove invalid set_tcb callAyush Sawal1-3/+0
At the time of SYN_RECV, connection information is not initialized at FW, updating tcb flag over uninitialized connection causes adapter crash. We don't need to update the flag during SYN_RECV state, so avoid this. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Fix hardware tid leakAyush Sawal1-36/+3
send_abort_rpl() is not calculating cpl_abort_req_rss offset and ends up sending wrong TID with abort_rpl WR causng tid leaks. Replaced send_abort_rpl() with chtls_send_abort_rpl() as it is redundant. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07Merge tag 'gcc-plugins-v5.11-rc3' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull gcc-plugins fix from Kees Cook: "Bump c++ standard version for latest GCC versions (Valdis Kletnieks)" * tag 'gcc-plugins-v5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: fix gcc 11 indigestion with plugins...
2021-01-07KVM: SVM: Add support for booting APs in an SEV-ES guestTom Lendacky8-6/+63
Typically under KVM, an AP is booted using the INIT-SIPI-SIPI sequence, where the guest vCPU register state is updated and then the vCPU is VMRUN to begin execution of the AP. For an SEV-ES guest, this won't work because the guest register state is encrypted. Following the GHCB specification, the hypervisor must not alter the guest register state, so KVM must track an AP/vCPU boot. Should the guest want to park the AP, it must use the AP Reset Hold exit event in place of, for example, a HLT loop. First AP boot (first INIT-SIPI-SIPI sequence): Execute the AP (vCPU) as it was initialized and measured by the SEV-ES support. It is up to the guest to transfer control of the AP to the proper location. Subsequent AP boot: KVM will expect to receive an AP Reset Hold exit event indicating that the vCPU is being parked and will require an INIT-SIPI-SIPI sequence to awaken it. When the AP Reset Hold exit event is received, KVM will place the vCPU into a simulated HLT mode. Upon receiving the INIT-SIPI-SIPI sequence, KVM will make the vCPU runnable. It is again up to the guest to then transfer control of the AP to the proper location. To differentiate between an actual HLT and an AP Reset Hold, a new MP state is introduced, KVM_MP_STATE_AP_RESET_HOLD, which the vCPU is placed in upon receiving the AP Reset Hold exit event. Additionally, to communicate the AP Reset Hold exit event up to userspace (if needed), a new exit reason is introduced, KVM_EXIT_AP_RESET_HOLD. A new x86 ops function is introduced, vcpu_deliver_sipi_vector, in order to accomplish AP booting. For VMX, vcpu_deliver_sipi_vector is set to the original SIPI delivery function, kvm_vcpu_deliver_sipi_vector(). SVM adds a new function that, for non SEV-ES guests, invokes the original SIPI delivery function, kvm_vcpu_deliver_sipi_vector(), but for SEV-ES guests, implements the logic above. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Message-Id: <e8fbebe8eb161ceaabdad7c01a5859a78b424d5e.1609791600.git.thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexitMaxim Levitsky3-1/+8
It is possible to exit the nested guest mode, entered by svm_set_nested_state prior to first vm entry to it (e.g due to pending event) if the nested run was not pending during the migration. In this case we must not switch to the nested msr permission bitmap. Also add a warning to catch similar cases in the future. Fixes: a7d5c7ce41ac1 ("KVM: nSVM: delay MSR permission processing to first nested VM run") Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210107093854.882483-2-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: nSVM: mark vmcb as dirty when forcingly leaving the guest modeMaxim Levitsky1-0/+1
We overwrite most of vmcb fields while doing so, so we must mark it as dirty. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210107093854.882483-5-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: nSVM: correctly restore nested_run_pending on migrationMaxim Levitsky1-0/+4
The code to store it on the migration exists, but no code was restoring it. One of the side effects of fixing this is that L1->L2 injected events are no longer lost when migration happens with nested run pending. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210107093854.882483-3-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: x86/mmu: Clarify TDP MMU page list invariantsBen Gardon1-2/+14
The tdp_mmu_roots and tdp_mmu_pages in struct kvm_arch should only contain pages with tdp_mmu_page set to true. tdp_mmu_pages should not contain any pages with a non-zero root_count and tdp_mmu_roots should only contain pages with a positive root_count, unless a thread holds the MMU lock and is in the process of modifying the list. Various functions expect these invariants to be maintained, but they are not explictily documented. Add to the comments on both fields to document the above invariants. Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20210107001935.3732070-2-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: x86/mmu: Ensure TDP MMU roots are freed after yieldBen Gardon1-56/+48
Many TDP MMU functions which need to perform some action on all TDP MMU roots hold a reference on that root so that they can safely drop the MMU lock in order to yield to other threads. However, when releasing the reference on the root, there is a bug: the root will not be freed even if its reference count (root_count) is reduced to 0. To simplify acquiring and releasing references on TDP MMU root pages, and to ensure that these roots are properly freed, move the get/put operations into another TDP MMU root iterator macro. Moving the get/put operations into an iterator macro also helps simplify control flow when a root does need to be freed. Note that using the list_for_each_entry_safe macro would not have been appropriate in this situation because it could keep a pointer to the next root across an MMU lock release + reacquire, during which time that root could be freed. Reported-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Fixes: faaf05b00aec ("kvm: x86/mmu: Support zapping SPTEs in the TDP MMU") Fixes: 063afacd8730 ("kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU") Fixes: a6a0b05da9f3 ("kvm: x86/mmu: Support dirty logging for the TDP MMU") Fixes: 14881998566d ("kvm: x86/mmu: Support disabling dirty logging for the tdp MMU") Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20210107001935.3732070-1-bgardon@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07kvm: check tlbs_dirty directlyLai Jiangshan1-2/+1
In kvm_mmu_notifier_invalidate_range_start(), tlbs_dirty is used as: need_tlb_flush |= kvm->tlbs_dirty; with need_tlb_flush's type being int and tlbs_dirty's type being long. It means that tlbs_dirty is always used as int and the higher 32 bits is useless. We need to check tlbs_dirty in a correct way and this change checks it directly without propagating it to need_tlb_flush. Note: it's _extremely_ unlikely this neglecting of higher 32 bits can cause problems in practice. It would require encountering tlbs_dirty on a 4 billion count boundary, and KVM would need to be using shadow paging or be running a nested guest. Cc: stable@vger.kernel.org Fixes: a4ee1ca4a36e ("KVM: MMU: delay flush all tlbs on sync_page path") Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com> Message-Id: <20201217154118.16497-1-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: x86: change in pv_eoi_get_pending() to make code more readableStephen Zhang1-1/+1
Signed-off-by: Stephen Zhang <stephenzhangzsd@gmail.com> Message-Id: <1608277897-1932-1-git-send-email-stephenzhangzsd@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski4-7/+14
Alexei Starovoitov says: ==================== pull-request: bpf 2021-01-07 We've added 4 non-merge commits during the last 10 day(s) which contain a total of 4 files changed, 14 insertions(+), 7 deletions(-). The main changes are: 1) Fix task_iter bug caused by the merge conflict resolution, from Yonghong. 2) Fix resolve_btfids for multiple type hierarchies, from Jiri. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpftool: Fix compilation failure for net.o with older glibc tools/resolve_btfids: Warn when having multiple IDs for single type bpf: Fix a task_iter bug caused by a merge conflict resolution selftests/bpf: Fix a compile error for BPF_F_BPRM_SECUREEXEC ==================== Link: https://lore.kernel.org/r/20210107221555.64959-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07MAINTAINERS: Really update email address for Sean ChristophersonSean Christopherson1-1/+1
Use my @google.com address in MAINTAINERS, somehow only the .mailmap entry was added when the original update patch was applied. Fixes: c2b1209d852f ("MAINTAINERS: Update email address for Sean Christopherson") Cc: kvm@vger.kernel.org Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210106182916.331743-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: x86: fix shift out of bounds reported by UBSANPaolo Bonzini1-1/+1
Since we know that e >= s, we can reassociate the left shift, changing the shifted number from 1 to 2 in exchange for decreasing the right hand side by 1. Reported-by: syzbot+e87846c48bf72bc85311@syzkaller.appspotmail.com Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: selftests: Implement perf_test_util more conventionallyAndrew Jones6-146/+166
It's not conventional C to put non-inline functions in header files. Create a source file for the functions instead. Also reduce the amount of globals and rename the functions to something less generic. Reviewed-by: Ben Gardon <bgardon@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Message-Id: <20201218141734.54359-4-drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: selftests: Use vm_create_with_vcpus in create_vmAndrew Jones5-47/+21
Reviewed-by: Ben Gardon <bgardon@google.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Message-Id: <20201218141734.54359-3-drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: selftests: Factor out guest mode codeAndrew Jones6-257/+189
demand_paging_test, dirty_log_test, and dirty_log_perf_test have redundant guest mode code. Factor it out. Also, while adding a new include, remove the ones we don't need. Reviewed-by: Ben Gardon <bgardon@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Message-Id: <20201218141734.54359-2-drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM/SVM: Remove leftover __svm_vcpu_run prototype from svm.cUros Bizjak1-2/+0
Commit 16809ecdc1e8a moved __svm_vcpu_run the prototype to svm.h, but forgot to remove the original from svm.c. Fixes: 16809ecdc1e8a ("KVM: SVM: Provide an updated VMRUN invocation for SEV-ES guests") Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Message-Id: <20201220200339.65115-1-ubizjak@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: SVM: Add register operand to vmsave call in sev_es_vcpu_loadNathan Chancellor1-1/+1
When using LLVM's integrated assembler (LLVM_IAS=1) while building x86_64_defconfig + CONFIG_KVM=y + CONFIG_KVM_AMD=y, the following build error occurs: $ make LLVM=1 LLVM_IAS=1 arch/x86/kvm/svm/sev.o arch/x86/kvm/svm/sev.c:2004:15: error: too few operands for instruction asm volatile(__ex("vmsave") : : "a" (__sme_page_pa(sd->save_area)) : "memory"); ^ arch/x86/kvm/svm/sev.c:28:17: note: expanded from macro '__ex' #define __ex(x) __kvm_handle_fault_on_reboot(x) ^ ./arch/x86/include/asm/kvm_host.h:1646:10: note: expanded from macro '__kvm_handle_fault_on_reboot' "666: \n\t" \ ^ <inline asm>:2:2: note: instantiated into assembly here vmsave ^ 1 error generated. This happens because LLVM currently does not support calling vmsave without the fixed register operand (%rax for 64-bit and %eax for 32-bit). This will be fixed in LLVM 12 but the kernel currently supports LLVM 10.0.1 and newer so this needs to be handled. Add the proper register using the _ASM_AX macro, which matches the vmsave call in vmenter.S. Fixes: 861377730aa9 ("KVM: SVM: Provide support for SEV-ES vCPU loading") Link: https://reviews.llvm.org/D93524 Link: https://github.com/ClangBuiltLinux/linux/issues/1216 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Message-Id: <20201219063711.3526947-1-natechancellor@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07Merge branch 'kvm-master' into kvm-nextPaolo Bonzini1108-7721/+13607
Fixes to get_mmio_spte, destined to 5.10 stable branch.
2021-01-07KVM: x86/mmu: Optimize not-present/MMIO SPTE check in get_mmio_spte()Sean Christopherson1-7/+13
Check only the terminal leaf for a "!PRESENT || MMIO" SPTE when looking for reserved bits on valid, non-MMIO SPTEs. The get_walk() helpers terminate their walks if a not-present or MMIO SPTE is encountered, i.e. the non-terminal SPTEs have already been verified to be regular SPTEs. This eliminates an extra check-and-branch in a relatively hot loop. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20201218003139.2167891-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: x86/mmu: Use raw level to index into MMIO walks' sptes arraySean Christopherson2-9/+8
Bump the size of the sptes array by one and use the raw level of the SPTE to index into the sptes array. Using the SPTE level directly improves readability by eliminating the need to reason out why the level is being adjusted when indexing the array. The array is on the stack and is not explicitly initialized; bumping its size is nothing more than a superficial adjustment to the stack frame. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20201218003139.2167891-4-seanjc@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: x86/mmu: Get root level from walkers when retrieving MMIO SPTESean Christopherson3-11/+13
Get the so called "root" level from the low level shadow page table walkers instead of manually attempting to calculate it higher up the stack, e.g. in get_mmio_spte(). When KVM is using PAE shadow paging, the starting level of the walk, from the callers perspective, is not the CR3 root but rather the PDPTR "root". Checking for reserved bits from the CR3 root causes get_mmio_spte() to consume uninitialized stack data due to indexing into sptes[] for a level that was not filled by get_walk(). This can result in false positives and/or negatives depending on what garbage happens to be on the stack. Opportunistically nuke a few extra newlines. Fixes: 95fb5b0258b7 ("kvm: x86/mmu: Support MMIO in the TDP MMU") Reported-by: Richard Herbert <rherbert@sympatico.ca> Cc: Ben Gardon <bgardon@google.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20201218003139.2167891-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: x86/mmu: Use -1 to flag an undefined spte in get_mmio_spte()Sean Christopherson2-2/+7
Return -1 from the get_walk() helpers if the shadow walk doesn't fill at least one spte, which can theoretically happen if the walk hits a not-present PDPTR. Returning the root level in such a case will cause get_mmio_spte() to return garbage (uninitialized stack data). In practice, such a scenario should be impossible as KVM shouldn't get a reserved-bit page fault with a not-present PDPTR. Note, using mmu->root_level in get_walk() is wrong for other reasons, too, but that's now a moot point. Fixes: 95fb5b0258b7 ("kvm: x86/mmu: Support MMIO in the TDP MMU") Cc: Ben Gardon <bgardon@google.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20201218003139.2167891-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-06 01:58:51 +0000