summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2021-01-08Merge tag 'arm-fixes-5.11-1' of ↵Linus Torvalds7-8/+23
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "These are a small number of bug fixes that all came in before or during the merge window, most for the omap platform: - One boot regression fix for Nokia N9 (OMAP3). - Two small defconfig changes for omap2, to reflect changes in drivers - Warning fixes for DT issues on omap2, picoxcell and bitmap SoCs. The picoxcell platform will be removed in v5.12, but fixing it first makes it easier to backport to the fix to stable kernels and get a clean build with new dtc versions" * tag 'arm-fixes-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: picoxcell: fix missing interrupt-parent properties ARM: dts: ux500/golden: Set display max brightness arm64: dts: bitmain: Use generic "ngpios" rather than "snps,nr-gpios" ARM: omap2: pmic-cpcap: fix maximum voltage to be consistent with defaults on xt875 ARM: omap2plus_defconfig: enable SPI GPIO ARM: OMAP2+: omap_device: fix idling of devices during probe ARM: dts: OMAP3: disable AES on N950/N9 ARM: omap2plus_defconfig: drop unused POWER_AVS option
2021-01-08Merge tag 'arm64-fixes' of ↵Linus Torvalds10-18/+27
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Clean-ups following the merging window: remove unused variable, duplicate includes, superfluous barrier, move some inline asm to separate functions. - Disable top-byte-ignore on kernel code addresses with KASAN/MTE enabled (already done when MTE is disabled). - Fix ARCH_LOW_ADDRESS_LIMIT definition with CONFIG_ZONE_DMA disabled. - Compiler/linker flags: link with "-z norelno", discard .eh_frame_hdr instead of --no-eh-frame-hdr. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Move PSTATE.TCO setting to separate functions arm64: kasan: Set TCR_EL1.TBID1 when KASAN_HW_TAGS is enabled arm64: vdso: disable .eh_frame_hdr via /DISCARD/ instead of --no-eh-frame-hdr arm64: traps: remove duplicate include statement arm64: link with -z norelro for LLD or aarch64-elf arm64: mm: Fix ARCH_LOW_ADDRESS_LIMIT when !CONFIG_ZONE_DMA arm64: mte: remove an ISB on kernel exit arm64/smp: Remove unused irq variable in arch_show_interrupts()
2021-01-08Merge tag 'net-5.11-rc3-2' of ↵Linus Torvalds66-309/+746
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull more networking fixes from Jakub Kicinski: "Slightly lighter pull request to get back into the Thursday cadence. Current release - always broken: - can: mcp251xfd: fix Tx/Rx ring buffer driver race conditions - dsa: hellcreek: fix led_classdev build errors Previous releases - regressions: - ipv6: fib: flush exceptions when purging route to avoid netdev reference leak - ip_tunnels: fix pmtu check in nopmtudisc mode - ip: always refragment ip defragmented packets to avoid MTU issues when forwarding through tunnels, correct "packet too big" message is prohibitively tricky to generate - s390/qeth: fix locking for discipline setup / removal and during recovery to prevent both deadlocks and races - mlx5: Use port_num 1 instead of 0 when delete a RoCE address Previous releases - always broken: - cdc_ncm: correct overhead calculation in delayed_ndp_size to prevent out of bound accesses with Huawei 909s-120 LTE module - fix stmmac dwmac-sun8i suspend/resume: - PHY being left powered off - MAC syscon configuration being reset - reference to the reset controller being improperly dropped - qrtr: fix null-ptr-deref in qrtr_ns_remove - can: tcan4x5x: fix bittiming const, use common bittiming from m_can driver - mlx5e: CT: Use per flow counter when CT flow accounting is enabled - mlx5e: Fix SWP offsets when vlan inserted by driver Misc: - bpf: Fix a task_iter bug caused by a bpf -> net merge conflict resolution And the usual many fixes to various error paths" * tag 'net-5.11-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) net: dsa: lantiq_gswip: Exclude RMII from modes that report 1 GbE s390/qeth: fix L2 header access in qeth_l3_osa_features_check() s390/qeth: fix locking for discipline setup / removal s390/qeth: fix deadlock during recovery selftests: fib_nexthops: Fix wrong mausezahn invocation nexthop: Bounce NHA_GATEWAY in FDB nexthop groups nexthop: Unlink nexthop group entry in error path nexthop: Fix off-by-one error in error path octeontx2-af: fix memory leak of lmac and lmac->name chtls: Fix chtls resources release sequence chtls: Added a check to avoid NULL pointer dereference chtls: Replace skb_dequeue with skb_peek chtls: Avoid unnecessary freeing of oreq pointer chtls: Fix panic when route to peer not configured chtls: Remove invalid set_tcb call chtls: Fix hardware tid leak net: ip: always refragment ip defragmented packets net: fix pmtu check in nopmtudisc mode selftests: netfilter: add selftest for ipip pmtu discovery with enabled connection tracking docs: octeontx2: tune rst markup ...
2021-01-08Merge branch 'linus' of ↵Linus Torvalds2-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a functional bug in arm/chacha-neon as well as a potential buffer overflow in ecdh" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ecdh - avoid buffer overflow in ecdh_set_secret() crypto: arm/chacha-neon - add missing counter increment
2021-01-08poll: fix performance regression due to out-of-line __put_user()Linus Torvalds1-3/+11
The kernel test robot reported a -5.8% performance regression on the "poll2" test of will-it-scale, and bisected it to commit d55564cfc222 ("x86: Make __put_user() generate an out-of-line call"). I didn't expect an out-of-line __put_user() to matter, because no normal core code should use that non-checking legacy version of user access any more. But I had overlooked the very odd poll() usage, which does a __put_user() to update the 'revents' values of the poll array. Now, Al Viro correctly points out that instead of updating just the 'revents' field, it would be much simpler to just copy the _whole_ pollfd entry, and then we could just use "copy_to_user()" on the whole array of entries, the same way we use "copy_from_user()" a few lines earlier to get the original values. But that is not what we've traditionally done, and I worry that threaded applications might be concurrently modifying the other fields of the pollfd array. So while Al's suggestion is simpler - and perhaps worth trying in the future - this instead keeps the "just update revents" model. To fix the performance regression, use the modern "unsafe_put_user()" instead of __put_user(), with the proper "user_write_access_begin()" guarding in place. This improves code generation enormously. Link: https://lore.kernel.org/lkml/20210107134723.GA28532@xsang-OptiPlex-9020/ Reported-by: kernel test robot <oliver.sang@intel.com> Tested-by: Oliver Sang <oliver.sang@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David Laight <David.Laight@aculab.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-08Revert "init/console: Use ttynull as a fallback when there is no console"Petr Mladek5-30/+18
This reverts commit 757055ae8dedf5333af17b3b5b4b70ba9bc9da4e. The commit caused that ttynull was used as the default console on several systems[1][2][3]. As a result, the console was blank even when a better alternative existed. It happened when there was no console configured on the command line and ttynull_init() was the first initcall calling register_console(). Or it happened when /dev/ did not exist when console_on_rootfs() was called. It was not able to open /dev/console even though a console driver was registered. It tried to add ttynull console but it obviously did not help. But ttynull became the preferred console and was used by /dev/console when it was available later. The commit tried to fix a historical problem that have been there for ages. The primary motivation was the commit 3cffa06aeef7ece30f6 ("printk/console: Allow to disable console output by using console="" or console=null"). It provided a clean solution for a workaround that was widely used and worked only by chance. This revert causes that the console="" or console=null command line options will again work only by chance. These options will cause that a particular console will be preferred and the default (tty) ones will not get enabled. There will be no console registered at all. As a result there won't be stdin, stdout, and stderr for the init process. But it worked exactly this way even before. The proper solution has to fulfill many conditions: + Register ttynull only when explicitly required or as the ultimate fallback. + ttynull should get associated with /dev/console but it must not become preferred console when used as a fallback. Especially, it must still be possible to replace it by a better console later. Such a change requires clean up of the register_console() code. Otherwise, it would be even harder to follow. Especially, the use of has_preferred_console and CON_CONSDEV flag is tricky. The clean up is risky. The ordering of consoles is not well defined. And any changes tend to break existing user settings. Do the revert at the least risky solution for now. [1] https://lore.kernel.org/linux-kselftest/20201221144302.GR4077@smile.fi.intel.com/ [2] https://lore.kernel.org/lkml/d2a3b3c0-e548-7dd1-730f-59bc5c04e191@synopsys.com/ [3] https://patchwork.ozlabs.org/project/linux-um/patch/20210105120128.10854-1-thomas@m3y3r.de/ Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by: Vineet Gupta <vgupta@synopsys.com> Reported-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-08ARM: picoxcell: fix missing interrupt-parent propertiesArnd Bergmann1-0/+4
dtc points out that the interrupts for some devices are not parsable: picoxcell-pc3x2.dtsi:45.19-49.5: Warning (interrupts_property): /paxi/gem@30000: Missing interrupt-parent picoxcell-pc3x2.dtsi:51.21-55.5: Warning (interrupts_property): /paxi/dmac@40000: Missing interrupt-parent picoxcell-pc3x2.dtsi:57.21-61.5: Warning (interrupts_property): /paxi/dmac@50000: Missing interrupt-parent picoxcell-pc3x2.dtsi:233.21-237.5: Warning (interrupts_property): /rwid-axi/axi2pico@c0000000: Missing interrupt-parent There are two VIC instances, so it's not clear which one needs to be used. I found the BSP sources that reference VIC0, so use that: https://github.com/r1mikey/meta-picoxcell/blob/master/recipes-kernel/linux/linux-picochip-3.0/0001-picoxcell-support-for-Picochip-picoXcell-SoC.patch Acked-by: Jamie Iles <jamie@jamieiles.com> Link: https://lore.kernel.org/r/20201230152010.3914962-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-07Merge tag 'mlx5-fixes-2021-01-07' of ↵Jakub Kicinski13-66/+122
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2021-01-07 * tag 'mlx5-fixes-2021-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Fix memleak in mlx5e_create_l2_table_groups net/mlx5e: Fix two double free cases net/mlx5: Release devlink object if adev fails net/mlx5e: ethtool, Fix restriction of autoneg with 56G net/mlx5e: In skb build skip setting mark in switchdev mode net/mlx5: E-Switch, fix changing vf VLANID net/mlx5e: Fix SWP offsets when vlan inserted by driver net/mlx5e: CT: Use per flow counter when CT flow accounting is enabled net/mlx5: Use port_num 1 instead of 0 when delete a RoCE address net/mlx5e: Add missing capability check for uplink follow net/mlx5: Check if lag is supported before creating one ==================== Link: https://lore.kernel.org/r/20210107202845.470205-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07net: dsa: lantiq_gswip: Exclude RMII from modes that report 1 GbEAleksander Jan Bajkowski1-3/+4
Exclude RMII from modes that report 1 GbE support. Reduced MII supports up to 100 MbE. Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210107195818.3878-1-olek2@wp.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07Merge branch 's390-qeth-fixes-2021-01-07'Jakub Kicinski4-17/+30
Julian Wiedmann says: ==================== s390/qeth: fixes 2021-01-07 This brings two locking fixes for the device control path. Also one fix for a path where our .ndo_features_check() attempts to access a non-existent L2 header. ==================== Link: https://lore.kernel.org/r/20210107172442.1737-1-jwi@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07s390/qeth: fix L2 header access in qeth_l3_osa_features_check()Julian Wiedmann1-1/+1
ip_finish_output_gso() may call .ndo_features_check() even before the skb has a L2 header. This conflicts with qeth_get_ip_version()'s attempt to inspect the L2 header via vlan_eth_hdr(). Switch to vlan_get_protocol(), as already used further down in the common qeth_features_check() path. Fixes: f13ade199391 ("s390/qeth: run non-offload L3 traffic over common xmit path") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07s390/qeth: fix locking for discipline setup / removalJulian Wiedmann3-10/+7
Due to insufficient locking, qeth_core_set_online() and qeth_dev_layer2_store() can run in parallel, both attempting to load & setup the discipline (and stepping on each other toes along the way). A similar race can also occur between qeth_core_remove_device() and qeth_dev_layer2_store(). Access to .discipline is meant to be protected by the discipline_mutex, so add/expand the locking in qeth_core_remove_device() and qeth_core_set_online(). Adjust the locking in qeth_l*_remove_device() accordingly, as it's now handled by the callers in a consistent manner. Based on an initial patch by Ursula Braun. Fixes: 9dc48ccc68b9 ("qeth: serialize sysfs-triggered device configurations") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07s390/qeth: fix deadlock during recoveryJulian Wiedmann4-18/+34
When qeth_dev_layer2_store() - holding the discipline_mutex - waits inside qeth_l*_remove_device() for a qeth_do_reset() thread to complete, we can hit a deadlock if qeth_do_reset() concurrently calls qeth_set_online() and thus tries to aquire the discipline_mutex. Move the discipline_mutex locking outside of qeth_set_online() and qeth_set_offline(), and turn the discipline into a parameter so that callers understand the dependency. To fix the deadlock, we can now relax the locking: As already established, qeth_l*_remove_device() waits for qeth_do_reset() to complete. So qeth_do_reset() itself is under no risk of having card->discipline ripped out while it's running, and thus doesn't need to take the discipline_mutex. Fixes: 9dc48ccc68b9 ("qeth: serialize sysfs-triggered device configurations") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07Merge branch 'nexthop-various-fixes'Jakub Kicinski2-3/+5
Ido Schimmel says: ==================== nexthop: Various fixes This series contains various fixes for the nexthop code. The bugs were uncovered during the development of resilient nexthop groups. Patches #1-#2 fix the error path of nexthop_create_group(). I was not able to trigger these bugs with current code, but it is possible with the upcoming resilient nexthop groups code which adds a user controllable memory allocation further in the function. Patch #3 fixes wrong validation of netlink attributes. Patch #4 fixes wrong invocation of mausezahn in a selftest. ==================== Link: https://lore.kernel.org/r/20210107144824.1135691-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07selftests: fib_nexthops: Fix wrong mausezahn invocationIdo Schimmel1-1/+1
For IPv6 traffic, mausezahn needs to be invoked with '-6'. Otherwise an error is returned: # ip netns exec me mausezahn veth1 -B 2001:db8:101::2 -A 2001:db8:91::1 -c 0 -t tcp "dp=1-1023, flags=syn" Failed to set source IPv4 address. Please check if source is set to a valid IPv4 address. Invalid command line parameters! Fixes: 7c741868ceab ("selftests: Add torture tests to nexthop tests") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07nexthop: Bounce NHA_GATEWAY in FDB nexthop groupsPetr Machata1-1/+1
The function nh_check_attr_group() is called to validate nexthop groups. The intention of that code seems to have been to bounce all attributes above NHA_GROUP_TYPE except for NHA_FDB. However instead it bounces all these attributes except when NHA_FDB attribute is present--then it accepts them. NHA_FDB validation that takes place before, in rtm_to_nh_config(), already bounces NHA_OIF, NHA_BLACKHOLE, NHA_ENCAP and NHA_ENCAP_TYPE. Yet further back, NHA_GROUPS and NHA_MASTER are bounced unconditionally. But that still leaves NHA_GATEWAY as an attribute that would be accepted in FDB nexthop groups (with no meaning), so long as it keeps the address family as unspecified: # ip nexthop add id 1 fdb via 127.0.0.1 # ip nexthop add id 10 fdb via default group 1 The nexthop code is still relatively new and likely not used very broadly, and the FDB bits are newer still. Even though there is a reproducer out there, it relies on an improbable gateway arguments "via default", "via all" or "via any". Given all this, I believe it is OK to reformulate the condition to do the right thing and bounce NHA_GATEWAY. Fixes: 38428d68719c ("nexthop: support for fdb ecmp nexthops") Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07nexthop: Unlink nexthop group entry in error pathIdo Schimmel1-1/+3
In case of error, remove the nexthop group entry from the list to which it was previously added. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07nexthop: Fix off-by-one error in error pathIdo Schimmel1-1/+1
A reference was not taken for the current nexthop entry, so do not try to put it in the error path. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07octeontx2-af: fix memory leak of lmac and lmac->nameColin Ian King1-3/+11
Currently the error return paths don't kfree lmac and lmac->name leading to some memory leaks. Fix this by adding two error return paths that kfree these objects Addresses-Coverity: ("Resource leak") Fixes: 1463f382f58d ("octeontx2-af: Add support for CGX link management") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210107123916.189748-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07Merge branch 'bug-fixes-for-chtls-driver'Jakub Kicinski1-47/+24
Ayush Sawal says: ==================== Bug fixes for chtls driver patch 1: Fix hardware tid leak. patch 2: Remove invalid set_tcb call. patch 3: Fix panic when route to peer not configured. patch 4: Avoid unnecessary freeing of oreq pointer. patch 5: Replace skb_dequeue with skb_peek. patch 6: Added a check to avoid NULL pointer dereference patch. patch 7: Fix chtls resources release sequence. ==================== Link: https://lore.kernel.org/r/20210106042912.23512-1-ayush.sawal@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Fix chtls resources release sequenceAyush Sawal1-4/+4
CPL_ABORT_RPL is sent after releasing the resources by calling chtls_release_resources(sk); and chtls_conn_done(sk); eventually causing kernel panic. Fixing it by calling release in appropriate order. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Added a check to avoid NULL pointer dereferenceAyush Sawal1-0/+5
In case of server removal lookup_stid() may return NULL pointer, which is used as listen_ctx. So added a check before accessing this pointer. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Replace skb_dequeue with skb_peekAyush Sawal1-1/+1
The skb is unlinked twice, one in __skb_dequeue in function chtls_reset_synq() and another in cleanup_syn_rcv_conn(). So in this patch using skb_peek() instead of __skb_dequeue(), so that unlink will be handled only in cleanup_syn_rcv_conn(). Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Avoid unnecessary freeing of oreq pointerAyush Sawal1-3/+1
In chtls_pass_accept_request(), removing the chtls_reqsk_free() call to avoid oreq freeing twice. Here oreq is the pointer to struct request_sock. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Fix panic when route to peer not configuredAyush Sawal1-2/+12
If route to peer is not configured, we might get non tls devices from dst_neigh_lookup() which is invalid, adding a check to avoid it. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Remove invalid set_tcb callAyush Sawal1-3/+0
At the time of SYN_RECV, connection information is not initialized at FW, updating tcb flag over uninitialized connection causes adapter crash. We don't need to update the flag during SYN_RECV state, so avoid this. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Fix hardware tid leakAyush Sawal1-36/+3
send_abort_rpl() is not calculating cpl_abort_req_rss offset and ends up sending wrong TID with abort_rpl WR causng tid leaks. Replaced send_abort_rpl() with chtls_send_abort_rpl() as it is redundant. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07Merge tag 'gcc-plugins-v5.11-rc3' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull gcc-plugins fix from Kees Cook: "Bump c++ standard version for latest GCC versions (Valdis Kletnieks)" * tag 'gcc-plugins-v5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: fix gcc 11 indigestion with plugins...
2021-01-07Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski4-7/+14
Alexei Starovoitov says: ==================== pull-request: bpf 2021-01-07 We've added 4 non-merge commits during the last 10 day(s) which contain a total of 4 files changed, 14 insertions(+), 7 deletions(-). The main changes are: 1) Fix task_iter bug caused by the merge conflict resolution, from Yonghong. 2) Fix resolve_btfids for multiple type hierarchies, from Jiri. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpftool: Fix compilation failure for net.o with older glibc tools/resolve_btfids: Warn when having multiple IDs for single type bpf: Fix a task_iter bug caused by a merge conflict resolution selftests/bpf: Fix a compile error for BPF_F_BPRM_SECUREEXEC ==================== Link: https://lore.kernel.org/r/20210107221555.64959-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07Merge branch 'net-fix-netfilter-defrag-ip-tunnel-pmtu-blackhole'Jakub Kicinski4-8/+214
Florian Westphal says: ==================== net: fix netfilter defrag/ip tunnel pmtu blackhole Christian Perle reported a PMTU blackhole due to unexpected interaction between the ip defragmentation that comes with connection tracking and ip tunnels. Unfortunately setting 'nopmtudisc' on the tunnel breaks the test scenario even without netfilter. Christinas setup looks like this: +--------+ +---------+ +--------+ |Router A|-------|Wanrouter|-------|Router B| | |.IPIP..| |..IPIP.| | +--------+ +---------+ +--------+ / mtu 1400 \ / \ +--------+ +--------+ |Client A| |Client B| +--------+ +--------+ MTU is 1500 everywhere, except on Router A to Wanrouter and Wanrouter to Router B. Router A and Router B use IPIP tunnel interfaces to tunnel traffic between Client A and Client B over WAN. Client A sends a 1400 byte UDP datagram to Client B. This packet gets encapsulated in the IPIP tunnel. This works, packet is received on client B. When conntrack (or anything else that forces ip defragmentation) is enabled on Router A, the packet gets dropped on Router A after encapsulation because they exceed the link MTU. Setting the 'nopmtudisc' flag on the IPIP tunnel makes things worse, no packets pass even in the no-netfilter scenario. Patch one is a reproducer script for selftest infra. Patch two is a fix for 'nopmtudisc' behaviour so ip_tunnel will send an icmp error to Client A. This allows 'nopmtudisc' tunnel to forward the UDP datagrams. Patch three enables ip refragmentation for all reassembled packets, just like ipv6. ==================== Link: https://lore.kernel.org/r/20210105231523.622-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07net: ip: always refragment ip defragmented packetsFlorian Westphal1-1/+1
Conntrack reassembly records the largest fragment size seen in IPCB. However, when this gets forwarded/transmitted, fragmentation will only be forced if one of the fragmented packets had the DF bit set. In that case, a flag in IPCB will force fragmentation even if the MTU is large enough. This should work fine, but this breaks with ip tunnels. Consider client that sends a UDP datagram of size X to another host. The client fragments the datagram, so two packets, of size y and z, are sent. DF bit is not set on any of these packets. Middlebox netfilter reassembles those packets back to single size-X packet, before routing decision. packet-size-vs-mtu checks in ip_forward are irrelevant, because DF bit isn't set. At output time, ip refragmentation is skipped as well because x is still smaller than the mtu of the output device. If ttransmit device is an ip tunnel, the packet size increases to x+overhead. Also, tunnel might be configured to force DF bit on outer header. In this case, packet will be dropped (exceeds MTU) and an ICMP error is generated back to sender. But sender already respects the announced MTU, all the packets that it sent did fit the announced mtu. Force refragmentation as per original sizes unconditionally so ip tunnel will encapsulate the fragments instead. The only other solution I see is to place ip refragmentation in the ip_tunnel code to handle this case. Fixes: d6b915e29f4ad ("ip_fragment: don't forward defragmented DF packet") Reported-by: Christian Perle <christian.perle@secunet.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07net: fix pmtu check in nopmtudisc modeFlorian Westphal1-6/+5
For some reason ip_tunnel insist on setting the DF bit anyway when the inner header has the DF bit set, EVEN if the tunnel was configured with 'nopmtudisc'. This means that the script added in the previous commit cannot be made to work by adding the 'nopmtudisc' flag to the ip tunnel configuration. Doing so breaks connectivity even for the without-conntrack/netfilter scenario. When nopmtudisc is set, the tunnel will skip the mtu check, so no icmp error is sent to client. Then, because inner header has DF set, the outer header gets added with DF bit set as well. IP stack then sends an error to itself because the packet exceeds the device MTU. Fixes: 23a3647bc4f93 ("ip_tunnels: Use skb-len to PMTU check.") Cc: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07selftests: netfilter: add selftest for ipip pmtu discovery with enabled ↵Florian Westphal2-1/+208
connection tracking Convert Christians bug description into a reproducer. Cc: Shuah Khan <shuah@kernel.org> Reported-by: Christian Perle <christian.perle@secunet.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07docs: octeontx2: tune rst markupLukas Bulwahn1-26/+36
Commit 80b9414832a1 ("docs: octeontx2: Add Documentation for NPA health reporters") added new documentation with improper formatting for rst, and caused a few new warnings for make htmldocs in octeontx2.rst:169--202. Tune markup and formatting for better presentation in the HTML view. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: George Cherian <george.cherian@marvell.com> Link: https://lore.kernel.org/r/20210106161735.21751-1-lukas.bulwahn@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07net/mlx5e: Fix memleak in mlx5e_create_l2_table_groupsDinghao Liu1-0/+1
When mlx5_create_flow_group() fails, ft->g should be freed just like when kvzalloc() fails. The caller of mlx5e_create_l2_table_groups() does not catch this issue on failure, which leads to memleak. Fixes: 33cfaaa8f36f ("net/mlx5e: Split the main flow steering table") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-07net/mlx5e: Fix two double free casesDinghao Liu1-0/+2
mlx5e_create_ttc_table_groups() frees ft->g on failure of kvzalloc(), but such failure will be caught by its caller in mlx5e_create_ttc_table() and ft->g will be freed again in mlx5e_destroy_flow_table(). The same issue also occurs in mlx5e_create_ttc_table_groups(). Set ft->g to NULL after kfree() to avoid double free. Fixes: 7b3722fa9ef6 ("net/mlx5e: Support RSS for GRE tunneled packets") Fixes: 33cfaaa8f36f ("net/mlx5e: Split the main flow steering table") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-07net/mlx5: Release devlink object if adev failsLeon Romanovsky1-2/+5
Add missed freeing previously allocated devlink object. Fixes: a925b5e309c9 ("net/mlx5: Register mlx5 devices to auxiliary virtual bus") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-07net/mlx5e: ethtool, Fix restriction of autoneg with 56GAya Levin1-6/+18
Prior to this patch, configuring speed to 50G with autoneg off over devices supporting 50G per lane failed. Support for 50G per lane introduced a new set of link-modes, on which driver always performed a speed validation as if only legacy link-modes were configured. Fix driver speed validation to force setting autoneg over 56G only if in legacy link-mode. Fixes: 3d7cadae51f1 ("net/mlx5e: ethtool, Fix analysis of speed setting") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-07net/mlx5e: In skb build skip setting mark in switchdev modeMaor Dickman1-0/+5
sop_drop_qpn field in the cqe is used by two features, in SWITCHDEV mode to restore the chain id in case of a miss and in LEGACY mode to support skbedit mark action. In build RX skb, the skb mark field is set regardless of the configured mode which cause a corruption of the mark field in case of switchdev mode. Fix by overriding the mark value back to 0 in the representor tc update skb flow. Fixes: 8f1e0b97cc70 ("net/mlx5: E-Switch, Mark miss packets with new chain id mapping") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-07net/mlx5: E-Switch, fix changing vf VLANIDAlaa Hleihel1-14/+13
Adding vf VLANID for the first time, or after having cleared previously defined VLANID works fine, however, attempting to change an existing vf VLANID clears the rules on the firmware, but does not add new rules for the new vf VLANID. Fix this by changing the logic in function esw_acl_egress_lgcy_setup() so that it will always configure egress rules. Fixes: ea651a86d468 ("net/mlx5: E-Switch, Refactor eswitch egress acl codes") Signed-off-by: Alaa Hleihel <alaa@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-07net/mlx5e: Fix SWP offsets when vlan inserted by driverMoshe Shemesh3-7/+19
In case WQE includes inline header the vlan is inserted by driver even if vlan offload is set. On geneve over vlan interface where software parser is used the SWP offsets should be updated according to the added vlan. Fixes: e3cfc7e6b7bd ("net/mlx5e: TX, Add geneve tunnel stateless offload support") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-07net/mlx5e: CT: Use per flow counter when CT flow accounting is enabledOz Shlomo1-28/+49
Connection counters may be shared for both directions when the counter is used for connection aging purposes. However, if TC flow accounting is enabled then a unique counter is required per direction. Instantiate a unique counter per direction if the conntrack accounting extension is enabled. Use a shared counter when the connection accounting extension is disabled. Fixes: 1edae2335adf ("net/mlx5e: CT: Use the same counter for both directions") Signed-off-by: Oz Shlomo <ozsh@nvidia.com> Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-07net/mlx5: Use port_num 1 instead of 0 when delete a RoCE addressMark Zhang1-1/+1
In multi-port mode, FW reports syndrome 0x2ea48 (invalid vhca_port_number) if the port_num is not 1 or 2. Fixes: 80f09dfc237f ("net/mlx5: Eswitch, enable RoCE loopback traffic") Signed-off-by: Mark Zhang <markzhang@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-07net/mlx5e: Add missing capability check for uplink followAya Levin2-2/+4
Expose firmware indication that it supports setting eswitch uplink state to follow (follow the physical link). Condition setting the eswitch uplink admin-state with this capability bit. Older FW may not support the uplink state setting. Fixes: 7d0314b11cdd ("net/mlx5e: Modify uplink state on interface up/down") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-07net/mlx5: Check if lag is supported before creating oneMark Zhang1-6/+5
This patch fixes a memleak issue by preventing to create a lag and add PFs if lag is not supported. comm “python3”, pid 349349, jiffies 4296985507 (age 1446.976s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ……………. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ……………. backtrace: [<000000005b216ae7>] mlx5_lag_add+0x1d5/0×3f0 [mlx5_core] [<000000000445aa55>] mlx5e_nic_enable+0x66/0×1b0 [mlx5_core] [<00000000c56734c3>] mlx5e_attach_netdev+0x16e/0×200 [mlx5_core] [<0000000030439d1f>] mlx5e_attach+0x5c/0×90 [mlx5_core] [<0000000018fd8615>] mlx5e_add+0x1a4/0×410 [mlx5_core] [<0000000068bc504b>] mlx5_add_device+0x72/0×120 [mlx5_core] [<000000009fce51f9>] mlx5_register_device+0x77/0xb0 [mlx5_core] [<00000000d0d81ff3>] mlx5_load_one+0xc58/0×1eb0 [mlx5_core] [<0000000045077adc>] init_one+0x3ea/0×920 [mlx5_core] [<0000000043287674>] pci_device_probe+0xcd/0×150 [<00000000dafd3279>] really_probe+0x1c9/0×4b0 [<00000000f06bdd84>] driver_probe_device+0x5d/0×140 [<00000000e3d508b6>] device_driver_attach+0x4f/0×60 [<0000000084fba0f0>] bind_store+0xbf/0×120 [<00000000bf6622b3>] kernfs_fop_write+0x114/0×1b0 Fixes: 9b412cc35f00 ("net/mlx5e: Add LAG warning if bond slave is not lag master") Signed-off-by: Mark Zhang <markzhang@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-07Merge tag 'spi-fix-v5.11-rc2' of ↵Linus Torvalds4-21/+104
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A couple of core fixes here, both to do with handling of drivers which don't report their maximum speed since we factored some of the handling for transfer speeds out into the core in the previous release. There's also some driver specific fixes, including a relatively large set for some races around timeouts in spi-geni-qcom" * tag 'spi-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fix the divide by 0 error when calculating xfer waiting time spi: Fix the clamping of spi->max_speed_hz spi: altera: fix return value for altera_spi_txrx() spi: stm32: FIFO threshold level - fix align packet size spi: spi-geni-qcom: Print an error when we timeout setting the CS spi: spi-geni-qcom: Don't try to set CS if an xfer is pending spi: spi-geni-qcom: Fail new xfers if xfer/cancel/abort pending spi: spi-geni-qcom: Fix geni_spi_isr() NULL dereference in timeout case
2021-01-07Merge tag 'regulator-fix-v5.11-rc2' of ↵Linus Torvalds6-5/+70
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A few minor driver specific fixes, mostly DT bindings document bits, plus a new device ID" * tag 'regulator-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: qcom-rpmh: add QCOM_COMMAND_DB dependency regulator: qcom-rpmh-regulator: correct hfsmps515 definition dt-bindings: regulator: qcom,rpmh-regulator: add pm8009 revision regulator: bd718x7: Add enable times regulator: pf8x00: Use specific compatible strings for devices
2021-01-07tools: selftests: add test for changing routes with PTMU exceptionsSean Tranchetti1-2/+69
Adds new 2 new tests to the PTMU script: pmtu_ipv4/6_route_change. These tests explicitly test for a recently discovered problem in the IPv6 routing framework where PMTU exceptions were not properly released when replacing a route via "ip route change ...". After creating PMTU exceptions, the route from the device A to R1 will be replaced with a new route, then device A will be deleted. If the PMTU exceptions were properly cleaned up by the kernel, this device deletion will succeed. Otherwise, the unregistration of the device will stall, and messages such as the following will be logged in dmesg: unregister_netdevice: waiting for veth_A-R1 to become free. Usage count = 4 Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/1609892546-11389-2-git-send-email-stranche@quicinc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07net: ipv6: fib: flush exceptions when purging routeSean Tranchetti1-3/+2
Route removal is handled by two code paths. The main removal path is via fib6_del_route() which will handle purging any PMTU exceptions from the cache, removing all per-cpu copies of the DST entry used by the route, and releasing the fib6_info struct. The second removal location is during fib6_add_rt2node() during a route replacement operation. This path also calls fib6_purge_rt() to handle cleaning up the per-cpu copies of the DST entries and releasing the fib6_info associated with the older route, but it does not flush any PMTU exceptions that the older route had. Since the older route is removed from the tree during the replacement, we lose any way of accessing it again. As these lingering DSTs and the fib6_info struct are holding references to the underlying netdevice struct as well, unregistering that device from the kernel can never complete. Fixes: 2b760fcf5cfb3 ("ipv6: hook up exception table to store dst cache") Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/1609892546-11389-1-git-send-email-stranche@quicinc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07Merge tag 'regmap-fix-v5.11-rc2' of ↵Linus Torvalds1-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fixes from Mark Brown: "A couple of small fixes for leaks when attaching a device to a preexisting regmap" * tag 'regmap-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: debugfs: Fix a reversed if statement in regmap_debugfs_init() regmap: debugfs: Fix a memory leak when calling regmap_attach_dev
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-02 02:20:19 +0000